HIGH-PRESSURE VALVES AND CONNECTORSFor use in High-Pressure Applications

www.Schrader-Pacific.com •• 1.800.345.057822

HIGH-PRESSURE VALVES AND CONNECTORS

22

Part Number Generic NumberAN/MS Number Cap Core

Maximum Working Pressure (PSIG)

Remarks

007987105 798 M-6164-2 132790 - 5,000  o-ring 007980114

007987109 798A M-6164-5 761200 - 5,000 Meets Boeing spec. BAC-V10T, Nickel plated cap. Compatible with Skydrol #500-A Hydraulic fluid per M-6164-5

007987311 798E M-6164-2 132790 - 5,000 Lockwire holes in swivel nut

0798001000 798i 132790 - 5,000 Not certified for aircraft use - Industrial use only

0798002000 798iE 132790 - 5,000 Lockwire holes in swivel nut. Not certified for aircraft use - Industrial use only

043617010 4361S AN-6287 132790 9914 4,000    

076070949 7607AH AN-812-1 132790 9914 4,000    

• Installation Torque: 120 ± 5 in/lbs (Lubricate o-ring with hydraulic oil) - Does not apply to 7607AH

• Closing Torque: 55 ± 5 in/lbs - Does not apply to 7607AH

• Cap Installation Torque: 5 - 15 in/lbs

Schrader Pacific high-pressure valves are constructed of stainless steel bodies and are intended for use in high-pressure air-charged units such as shock absorber struts, hydraulic pressure accumulators, surge cylinders, and pneumatic systems. These valves have a special feature which warns of un-released air pressure when the valve is being separated from the outlet. Contact Schrader Pacific for further information on military and commercial adaptations. Valves have ½”-20 UNJF-3A threads for connection to container.

.68817.49

1.12828.65

1.3333.68

.43511.05

.305-32 THREAD

.75" HEX(19.05)

.75" HEX(19.1)

½-20 UNJF-3A THREAD

798

.43511.05

.68817.49

1.12828.65

1.32633.68

.305-32 THREAD

.75" HEX(19.05)

.75" HEX(19.1)

½-20 UNJF-3A THREAD

798A

.43511.05

.68817.49

1.12828.65

1.32633.68

.305-32 THREAD

.75" HEX(19.05)

.75" HEX(19.1)

½-20 UNJF-3A THREAD

798E

.59315.07 .866

21.99

.40910.39

.71918.27

.305-32 THREAD

.75" HEX(19.1)

½-20 UNJF-3A THREAD

7607AH

.64116.28

1.17029.73

.53113.48

.89822.81

.305-32 THREAD

.63" HEX(15.9)

.75" HEX(19.1)

½-20 UNJF-3A THREAD

4361S

4361S

7607AH798, 798i

798A

798E, 798iE

www.Schrader-Pacific.com •• 1.800.345.0578 3

HIGH-PRESSURE VALVES AND CONNECTORS

Due to the variety of operating conditions and applications, the customer is responsible to perform their own testing to ensure performance, safety and warranty requirements for the intended application.

3

Part NumberGeneric Number Thread Size Air Line Connection

Maximum Working Pressure (PSIG) Configuration

Recommended Max. Torque to Valve Mouth* Remarks

005560099 556 .305"-32 1/8" NPT Male 3,000 Air line connection: 90° to axis of valve

50 in-lb. Has core depressor pin, copper sealing washer 027550080 (25 pack, 100 pack)

027550169 2755 .305"-32 3/8"-24 thread for 3/16" flare tube fitting, meets SAE AS4395

3,000 Air line connection: 90° to axis of valve

50 in-lb. Has core depressor pin, copper sealing washer 027550080 (25 pack, 100 pack)

027550008 2755 Large Bore

.485"-26 3/8"-24 thread for 3/16" flare tube fitting

3,000 Air line connection: 90° to axis of valve

50 in-lb. Has core depressor pin, copper sealing washer 027550012 (25 pack, 100 pack)

050070099 5007 .305"-32 7/16"-20 thread for 1/4" flare tube fitting, meets SAE AS4395

15,000 Straight 75 in-lb. for steel valves

Copper sealing washer 027550080 (25 pack, 100 pack)

061160001 6116 .305"-32 1/8" NPT Female 3,000 Air line connection: 70° to axis of valve

30 in-lb. Hard fiber sealing washer 0611650025 (25 pack, 100 pack)

057840099 5784 .305"-32 7/16"-20 thread for 1/4" flare tube fitting, meets SAE AS4395

5,000 Air line connection: 70° to axis of valve

30 in-lb. Hard fiber sealing washer 019370029 (25 pack, 100 pack)

* It may be necessary to replace the sealing washers after a number of uses to insure sealing on valve mouth

These high-pressure inflating connections attach securely by hand or wrench to the valve cap threads of high-pressure valves. They can be fitted to gaging and inflating devices by a variety of methods. Various angles permit easy attachment to hard-to-reach valves.

556 2755

5784 5007 6116

12312019

205 Frazier RoadAltavista, Virginia 24517

1.800.345.0578

www.Schrader-Pacific.com

1 7/16" 36.51

3/4" 19.05

005560099

3/4" 19.05

1 7/16" 36.51

027550169

1.547 39.29

G-5007

1.625 41.28

20°

.84 21.3

1/8 - 27 NPT

061160001

70°

1.813 46.04

1.219 30.96

SECTION A-ASCALE 1.5 : 1

057840099

Detailed customer drawings available. Sections shown for size reference.

556

2755

5784

5007

6116