high positive efficiency power tolerance...salt mist, ammonia and hail resistant (iec 61701) (iec...

2
HIGH EFFICIENCY POSITIVE POWER TOLERANCE Outstanding Durability With its reinforced frame design, our modules can endure front load of up to 5400 Pa and rear load of up to 2400 Pa to withstand heavy wind & snow loads High Power Output Our PV modules are compact in size and have been designed to deliver enhanced output and efficiency Better Performance in High Temperature Our PV modules deliver efficient performance even in high temperature conditions due to its improved temperature coefficient Enhanced Performance Our PV modules provide more than 80% efficiency even after 25 years of operation 5 Busbar Solar Cell 5 busbar cell design improves module efficiency and offers better power output Low Light performance Advanced glass and cell surface texture design ensures excellent performance in low light environment PID resistant (IEC 62804) Anti reflective coating 310-330Wp 0/+5Wp Global Certifications IEC 61215, IEC 61730 (I & II), IEC 61853 certified, Sand and dust storm resistant (IEC 60068), Certification as per BIS Salt mist, ammonia and hail resistant (IEC 61701) (IEC 62716)

Upload: others

Post on 20-Aug-2020

6 views

Category:

Documents


1 download

TRANSCRIPT

Page 1: HIGH POSITIVE EFFICIENCY POWER TOLERANCE...Salt mist, ammonia and hail resistant (IEC 61701) (IEC 62716) POLYCRYSTALLINE SOLAR PV MODULES 72 CELLS 310-330WpPOWER OUTPUT RANGE Electrical

HIGH EFFICIENCY

POSITIVE POWER TOLERANCE

Outstanding DurabilityWith its reinforced frame design, our modules can endure front load of up to 5400 Pa and rear load of up to 2400 Pa to withstand heavy wind & snow loads

High Power OutputOur PV modules are compact in size and have been designed to deliver enhanced output and efficiency

Better Performance in High TemperatureOur PV modules deliver efficient performance even in high temperature conditions due to its improved temperature coefficient

Enhanced PerformanceOur PV modules provide more than 80% efficiency even after 25 years of operation

5 Busbar Solar Cell5 busbar cell design improves module efficiency and offers better power output

Low Light performance Advanced glass and cell surface texture design ensures excellent performance in low light environment

PID resistant(IEC 62804)

Anti reflectivecoating

310-330Wp0/+5Wp

Global CertificationsIEC 61215, IEC 61730 (I & II), IEC 61853 certified, Sand and dust storm resistant (IEC 60068), Certification as per BISSalt mist, ammonia and hail resistant (IEC 61701) (IEC 62716)

Page 2: HIGH POSITIVE EFFICIENCY POWER TOLERANCE...Salt mist, ammonia and hail resistant (IEC 61701) (IEC 62716) POLYCRYSTALLINE SOLAR PV MODULES 72 CELLS 310-330WpPOWER OUTPUT RANGE Electrical

POLYCRYSTALLINE SOLAR PV MODULES

72 CELLS310-330Wp POWER OUTPUT

RANGE

Electrical Data – Standard Test Conditions (STC)Peak Power Watts-PMAX (Wp)* 310 315 320 325 330

Power Output Tolerance-PMAX (Wp) 0/+5

Maximum Power Voltage-VMPP (V)* 37.0 37.1 37.1 37.2 37.25

Maximum Power Current-IMPP (A)* 8.38 8.51 8.63 8.76 8.86

Open Circuit Voltage VOC (V)* 45.5 45.6 45.8 45.9 45.94

Short Circuit Current ISC (A)* 8.85 9.00 9.10 9.25 9.41

Module Efficiency m (%)* 16.00 16.20 16.49 16.75 17.4η

2 ONOCT: Irradiance at 800 W/m , Ambient Temperature 20 C, Wind Speed 1m/s

I-V Curve with Irradiance

Cur

rent

[A]

Voltage [V]

OCells temp. = 25 C 21000 W/m

2800 W/m

2600 W/m

2400 W/m

2200 W/m

0 20 30 5010

10

9

8

7

6

5

4

3

2

1

040

Dimension of PV ModuleUnit : mm

1960

1000

948

990

REAR VIEW

4-DRAINAGE SLOTS

Negative (-) (+) Positive

1200

GROUNDINGSLOTS

MOUNTINGSLOTS

JUNCTIONBOX

480

480

230

230

1500

2 O* Under Standard Test Conditions (STC) of 1000 W/m irradiance, AM 1.5 spectrum and 25 C cell temperature.

** 200, 250, 300 & 305 Wp module in 72 cell available on special request

Mechanical DataSolar Cells Polycrystalline 156.75 x 156.75 mm

Cell Orientation 72 Cells (6x12)

Module Dimensions 1960 x 990 x 35 mm

Weight 22.5 kg

Glass 3.2 mm (0.13 Inches), High Transmission, AR Coated Tempered Glass

Backsheet Composite film

Cell encapsulation EVA-Ethylene Vinyl Acetate

Frame Anodized Aluminium Alloy

J-Box IP 67/68 with 3 bypass diodes2Cables Photovoltaic Technology Cable 4.0 mm

2 (0.006 Inches ), 1200 mm (47.2 Inches)

Connector MC4 Compatible or Amphenol H4/UTX

Fire Type Type 1 or Type 2

Temperature RatingsO ONominal Operating Cell Temperature (NOCT) 45 C (±2 C)

OTemperature Coefficient of PMAX -0.39%/ COTemperature Coefficient of VOC -0.32%/ COTemperature Coefficient of ISC -0.05%/ C

Maximum RatingsOOperating Temperature -40 / +85 C

Maximum System 1000V DC (IEC)Voltage 1000V DC (UL)

Max Series Fuse Rating 15A

(Please refer to product warranty for details)

Warranty10 year Product Workmanship Warranty

25 year Linear Power Warranty

JAKSON GROUPA-43, Phase-II Extn., Hosiery Complex, Noida-201305, U.P., India | Tel.: +91-120-4302600, 4526100Toll Free No. : 1800 103 2600 | [email protected] | www.jakson.com

Product specifications are subject to change without notice©2018 JAKSON ENGINEERS LTD. All rights reserved

POLY72C-V2-100918-2K-AVR

Electrical Data – Normal Operating Cell Temperature (NOCT)Maximum Power-PMAX (Wp) 230 234 238 242 246

Maximum Power Voltage-VMPP (V) 34.3 34.3 34.4 34.5 34.6

Maximum Power Current-IMPP (A) 6.72 6.83 6.91 7.02 7.06

Open Circuit Voltage VOC (V) 42.2 42.3 42.5 42.6 42.6

Short Circuit Current ISC (A) 7.15 7.27 7.35 7.47 7.73

Linear Performance Warranty10 Year Product Warranty - 25 Year Linear Power Warranty

100%

90%

80%

0%5 10 15 20 25

Year 25: 80.7%

Year 1: 97.5%

Added value from warranty