high-grade xy stage 40 x 40, 50 x 50 - thk...applicable cables tacb-stm-d3, tarc-stm-d3 high-grade...
TRANSCRIPT
‐ TALD-4011-G1M ‐ TALD-4011-G1M-R ‐ TALD-5012-G1M ‐ TALD-5012-G1M-R
A high-precision, high-rigidity motorized stage using the HG-VCR method.
Precision screw and ball screw specifications are available.
Versatile use for precision positioning of cameras, sensors, workpieces, and more.
Model number (standard) TALD-4011-G0M TALD-4011-G1M TALD-5012-G0M TALD-5012-G1M
Model number (symmetrical) TALD-4011-G0M-R TALD-4011-G1M-R TALD-5012-G0M-R TALD-5012-G1M-R
Model name High-Grade XY StageTravel direction XY-axis double directionTravel amount ±7.5 mm ±10 mmStage surface 40 mm x 40 mm 50 mm x 50 mmMotor used PK523HPB equivalent (5-wire type pentagonal wiring, 0.75 A/phase)Resolution 0.001 mm 0.002 mm 0.001 mm 0.002 mmFeed screw specification Precision screw Ball screw Precision screw Ball screwFeed screw lead 0.5 mm 1 mm 0.5 mm 1 mmTravel guide HG-VCR (V-groove and cross rollers)
Travel accuracyStraightness (horizontal/vertical): 0.002 mm
Yawing 20 s, pitching 30 s Yawing 15 s, pitching 25 s Yawing 20 s, pitching 30 s Yawing 15 s, pitching 25 sPositioning accuracy 0.01 mm 0.006 mm 0.012 mm 0.008 mmRepeatability ±0.0005 mm ±0.0003 mm ±0.0005 mm ±0.0003 mmLost motion 0.005 mm 0.001 mm 0.005 mm 0.001 mmParallelism of motion 0.04 mm 0.03 mm 0.03 mm 0.02 mmXY orthogonality 0.006 mm
Moment rigidityYaw rigidity 0.5 s/N·cm, pitch rigidity 0.6 s/N·cm,
roll rigidity 0.6 s/N·cmYaw rigidity 0.3 s/N·cm, pitch rigidity 0.4 s/N·cm,
roll rigidity 0.4 s/N·cm
Load capacity 39.2 N (4 kgf)Mass 0.64 kg 0.8 kgMaximum speed (at 8,000 pps) 8 mm/s 16 mm/s 8 mm/s 16 mm/sMain materials/surface treatment Aluminum alloy/black satin anodized finishHome position sensor Normally closed contact point (break contact, B contact) operation, photo sensorLimit sensor Normally closed contact point (break contact, B contact) operation, photo sensorApplicable cables TACB-STM-D3, TARC-STM-D3
High-Grade XY Stage 40 x 40, 50 x 50HG-VCR method 0.75 A/phase 0.75 A/phase
motor
Features
Motorized
Stages
Autom
ated P
roducts for M
icroscopesM
anual Stages
High-G
rade S
tages
30 mm
x 30 mm
( φ
30 mm
) C
ompact Stages
Cross R
oller S
tagesB
all Bushing
Stages
High-P
recision/H
igh-Rigidity
Stages
Z Lift Stages
Tilt Stages
Connection
Cables
Actuators
Mechanical Stage Systems
▶Motorized Stages High-Grade Stages
27
▪ Sensor operating logic and timing chart
Mechanical stopper
Home position sensor
CCW limit
CW limit
CW direction (reverse motor side)
CCW direction (motor side)
Dark (5 V): DetectLight (0 V)Dark (5 V): DetectLight (0 V)Dark (5 V): DetectLight (0 V)
CW limit
CCW limit
Home position
end
Mechanical limit
Mechanical limit
Home position opposite
end
CW limit photo sensor (NC)
Home position photo sensor (NC)
CCW limit photo sensor (NC)
▪ Connection method: Connection cable and driver
Oriental Motor Co., Ltd. driver, etc.
Stage side
TACB-STM-D3 (3 m)TARC-STM-D3 (3 m)
Cutoff
Connection cable
30.5
4011
1
18.5
2525
16.5
2
28
1118.5 40
3232 φ20
φ20
24 32
3224
41.555.5
28
4-3.5 drilled 6 deep counterbore4-M3 depth 6Manual handle
Stepper motor
Connector4-M3 depth 8
Connector Manual handleStepper motor
40
18.5
111
φ20
2816
.530.5
252
25
3240
1118.5
32φ20
3224
32 24
55.541.5
28
4-3.5 drilled 6 deep counterbore 4-M3 depth 6
Manual handle
Stepper motorConnector
Connector
4-M3 depth 8
Manual handle
Stepper motor
16.5 30
.5
121.
5
13.5
50
225
25
28
121.58.5
4050
40 φ20
φ2041.5
55.5
32 40
3240
28
4-3.5 drilled 6 deep counterbore4-M3 depth 8Manual handleStepper motor
Connector4-M3 depth 8
Manual handleStepper motor
Connector
13.5
5012
1.5
2816
.5
121.5
30.5
φ20
225
25
4050 8.5
40
φ20
55.5
28
3240
3240
41.5Manual handleStepper motor
Connector
4-M3 depth 8
Stepper motor
Manual handle4-3.5 drilled 6 deep counterbore 4-M3 depth 8
Connector
‐ TALD-4011-G1M
‐ TALD-4011-G1M-R
‐ TALD-5012-G1M
‐ TALD-5012-G1M-R
*TALD-4011-G0M has the same dimensions as TALD-4011-G1M.
*TALD-5012-G0M has the same dimensions as TALD-5012-G1M.
*TALD-4011-G0M-R has the same dimensions as TALD-4011-G1M-R.
*TALD-5012-G0M-R has the same dimensions as TALD-5012-G1M-R.
Product Appearance Motorized
Stages
Autom
ated P
roducts for M
icroscopesM
anual Stages
High-G
rade S
tages
30 mm
x 30 mm
( φ
30 mm
) C
ompact Stages
Cross R
oller S
tagesB
all Bushing
Stages
High-P
recision/H
igh-Rigidity
Stages
Z Lift Stages
Tilt Stages
Connection
Cables
Actuators
Mechanical Stage Systems
High-Grade Stages Motorized Stages◀
28
A high-precision, high-rigidity motorized stage using the HG-VCR method.
Precision screw and ball screw specifications are available.
Versatile use for precision positioning of cameras, sensors, workpieces, and more.
‐ TALD-6012-G1M ‐ TALD-6012-G1M-R ‐ TALD-7013-G1M ‐ TALD-7013-G1M-R
Model number (standard) TALD-6012-G0M TALD-6012-G1M TALD-7013-G0M TALD-7013-G1M
Model number (symmetrical) TALD-6012-G0M-R TALD-6012-G1M-R TALD-7013-G0M-R TALD-7013-G1M-R
Model name High-Grade XY StageTravel direction XY-axis double directionTravel amount ±12.5 mm ±15 mmStage surface 60 mm x 60 mm 70 mm x 70 mmMotor used PK523HPB equivalent (5-wire type pentagonal wiring, 0.75 A/phase)Resolution 0.001 mm 0.002 mm 0.001 mm 0.002 mmFeed screw specification Precision screw Ball screw Precision screw Ball screwFeed screw lead 0.5 mm 1 mm 0.5 mm 1 mmTravel guide HG-VCR (V-groove and cross rollers)
Travel accuracyStraightness (horizontal/vertical): 0.002 mm
Yawing 20 s, pitching 30 s Yawing 15 s, pitching 25 s Yawing 20 s, pitching 30 s Yawing 15 s, pitching 25 sPositioning accuracy 0.014 mm 0.01 mm 0.016 mm 0.012 mmRepeatability ±0.0005 mm ±0.0003 mm ±0.0005 mm ±0.0003 mmLost motion 0.005 mm 0.001 mm 0.005 mm 0.001 mmParallelism of motion 0.03 mm 0.02 mm 0.03 mm 0.02 mmXY orthogonality 0.006 mm
Moment rigidityYaw rigidity 0.2 s/N·cm, pitch rigidity 0.2 s/N·cm,
roll rigidity 0.2 s/N·cmYaw rigidity 0.12 s/N·cm, pitch rigidity 0.16 s/N·cm,
roll rigidity 0.16 s/N·cm
Load capacity 39.2 N (4 kgf)Mass 1.0 kg 1.2 kgMaximum speed (at 8,000 pps) 8 mm/s 16 mm/s 8 mm/s 16 mm/sMain materials/surface treatment Aluminum alloy/black satin anodized finishHome position sensor Normally closed contact point (break contact, B contact) operation, photo sensorLimit sensor Normally closed contact point (break contact, B contact) operation, photo sensorApplicable cables TACB-STM-D3, TARC-STM-D3
High-Grade XY Stage 60 x 60, 70 x 70HG-VCR method 0.75 A/phase 0.75 A/phase
motor
Features
Motorized
Stages
Autom
ated P
roducts for M
icroscopesM
anual Stages
High-G
rade S
tages
30 mm
x 30 mm
( φ
30 mm
) C
ompact Stages
Cross R
oller S
tagesB
all Bushing
Stages
High-P
recision/H
igh-Rigidity
Stages
Z Lift Stages
Tilt Stages
Connection
Cables
Actuators
Mechanical Stage Systems
▶Motorized Stages High-Grade Stages
29
▪ Sensor operating logic and timing chart
Mechanical stopper
Home position sensor
CCW limit
CW limit
CW direction (reverse motor side)
CCW direction (motor side)
Dark (5 V): DetectLight (0 V)Dark (5 V): DetectLight (0 V)Dark (5 V): DetectLight (0 V)
CW limit
CCW limit
Home position
end
Mechanical limit
Mechanical limit
Home position opposite
end
CW limit photo sensor (NC)
Home position photo sensor (NC)
CCW limit photo sensor (NC)
▪ Connection method: Connection cable and driver
Oriental Motor Co., Ltd. driver, etc.
Stage side
TACB-STM-D3 (3 m)TARC-STM-D3 (3 m)
Cutoff
Connection cable
φ20
φ20
8.5
325060
2
2816
.5 30.5
2525
32506013
4
134
2841.5
55.5
4050
40 50
ConnectorManual handleStepper motor
4-M3 depth 84-M4 depth 10
Connector
Stepper motorManual handle 4-M4 depth 8.5 4-4.5 drilled 7.5 deep counterbore
φ20
8.5
325060
252
2528φ
20
134
32 50 6013
4
16.5
30.5
2841.5
55.5
4050
4050
Manual handleStepper motor
4-M3 depth 84-M4 depth 10
Connector
Manual handle
Stepper motor 4-4.5 drilled 7.5 deep counterbore
4-M4 depth 8.5
Connector
2841.5
55.5
φ20Connector
32406070
8.5 146.5
28
2
16.525
2532406070
146.
5
φ20
30.5
5060
50 60
4-4.5 drilled 7.5 deep counterbore4-M4 depth 8.5
Manual handleStepper motor
Connector
8-M3 depth 84-M4 depth 10
Manual handleStepper motor
φ20
Connector
Stepper motor
4-M4 depth 10
8-M3 depth 8
ConnectorManual handle
324060
8.570
146.5
22528
2532 40 60 70φ20
16.5
30.5
Manual handleStepper motor
146.
5
2841.5
55.5
5060
4-4.5 drilled 7.5 deep counterbore 4-M4 depth 8.5
5060
‐ TALD-6012-G1M
‐ TALD-6012-G1M-R
‐ TALD-7013-G1M
‐ TALD-7013-G1M-R
*TALD-6012-G0M has the same dimensions as TALD-6012-G1M.
*TALD-6012-G0M-R has the same dimensions as TALD-6012-G1M-R.
*TALD-7013-G0M-R has the same dimensions as TALD-7013-G1M-R.
*TALD-7013-G0M has the same dimensions as TALD-7013-G1M.
Product Appearance Motorized
Stages
Autom
ated P
roducts for M
icroscopesM
anual Stages
High-G
rade S
tages
30 mm
x 30 mm
( φ
30 mm
) C
ompact Stages
Cross R
oller S
tagesB
all Bushing
Stages
High-P
recision/H
igh-Rigidity
Stages
Z Lift Stages
Tilt Stages
Connection
Cables
Actuators
Mechanical Stage Systems
High-Grade Stages Motorized Stages◀
30