heraeus noblelight drf systems€¦ · microwave-powered lamp at the heart of the lamp is the...
TRANSCRIPT
The DRF lamp has been the UV curing system of choice for fiber manufacturing and coating operations around the world. This success is due to the unique optical system incorporated in the lamp, which delivers highly focused, intense UV energy.
These lamps are used for curing photoresponsive coatings, coloring inks, and ribbon matrix polymers. High power and high intensity (irradiance) provide the curing energy to meet the sustained high speed demands in today's production environment.
Heraeus NoblelightDRF Systems
Microwave-powered Lamp At the heart of the lamp is the Heraeus Noblelight microwave-powered bulb. Power stability and spectral consistency over long periods of time are the hallmarks of the microwave energized lamp system.
Modular Lamps The modular design facilitates easy maintenance and replacement. Modular power supplies can be grouped for electrical control simplicity. Control flexibility is enhanced by the modular design, easy control settings, and prewired interconnections.
UV Curing Systems for Optical Fiber, Coloring, Ribbon, and Cable
I250 P/W
I250
F10T
BULB
PRIMARYELLIPTICALREFLECTOR
SECONDARYELLIPTICALREFLECTOR
PATENTEDCYLINDRICALBACKREFLECTOR(Optional)
FIBER ORRIBBON QUARTZ
TUBE
Interchangeable BulbsA variety of bulbs is available, each having a characteristic UV spectral output, allowing the matching of bulb energy to the photochemical response to yield the highest cure efficiency.
High Efficiency ReflectorsAn optional, patented back reflector collects light energy and delivers it uniformly around the target, substantially increasing the efficiency of the full elliptical reflector. In combination with the small diameter, high radiance bulbs, this reflector system produces the highest UV irradiance per watt of power of any lamp system.
The Following Reflector Systems are Available: ∏ R500: High reflectance over the entire spectral range; ∏ Dichroic: Enhanced UV reflectance, removes most visible
and infrared energy.
F10T and F6 Reflector SystemThe housing, which holds the secondary elliptical reflector, quartz tube, attachments and fittings (such as nitrogen connection), is designated F10T (for 10-inch lamps) or F6 (for 6-inch lamps). This housing is attached to the lamp housing by means of clamp-action latches. When attached, the optics of a full elliptical system are achieved. The electrodeless bulb is located at the primary focus (in the irradiator), and the product runs through the secondary focus. The accuracy and repeatability of the attachment to the lamp is governed by hard metal stops and pins. The F10T2 model separates differently than the F10T, in a manner that the fittings and quartz tube remain in place on the lamp assembly.
6" System
I300 P/W I300 B/W F6
260 mm (10.2 in.)
168 mm (6.6 in.)
277 mm (10.9 in.)
260 mm (10.2 in.)
168 mm (6.6 in.)
506 mm (19.9 in.)107 mm (4.2 in.)
174 mm (6.9 in.)
208 mm (8.2 in.)
Wavelength, nm
Radiated Power, W/10 nm
H Bulb (13 mm)
200 250 300 350 400 450 500 550
100
150
200
250
300
350
50
0
Wavelength, nm
Radiated Power, W/10 nm
H+ Bulb (13 mm)
200 250 300 350 400 450 500 550
100
150
200
250
300
350
50
0
Wavelength, nm
Radiated Power, W/10 nm
D Bulb (13 mm)
200 250 300 350 400 450 500 550
100
150
200
250
300
350
50
0
Wavelength, nm
Radiated Power, W/10 nm
V Bulb (13 mm)
200 250 300 350 400 450 500 550
100
150
200
250
300
350
50
0
Wavelength, nm
Radiated Power, W/10 nm
Q Bulb (13 mm)
200 250 300 350 400 450 500 550
100
150
200
250
300
350
50
0
Wavelength, nm
Radiated Power, W/10 nm
M Bulb (13 mm)
200 250 300 350 400 450 500 550
100
150
200
250
300
350
50
0
Wavelength, nm
Radiated Power, W/10 nm
H Bulb (13 mm)
200 250 300 350 400 450 500 550
100
150
200
250
300
350
50
0
Wavelength, nm
Radiated Power, W/10 nm
H+ Bulb (13 mm)
200 250 300 350 400 450 500 550
100
150
200
250
300
350
50
0
Wavelength, nm
Radiated Power, W/10 nm
D Bulb (13 mm)
200 250 300 350 400 450 500 550
100
150
200
250
300
350
50
0
Wavelength, nm
Radiated Power, W/10 nm
V Bulb (13 mm)
200 250 300 350 400 450 500 550
100
150
200
250
300
350
50
0
Wavelength, nm
Radiated Power, W/10 nm
Q Bulb (13 mm)
200 250 300 350 400 450 500 550
100
150
200
250
300
350
50
0
Wavelength, nm
Radiated Power, W/10 nm
M Bulb (13 mm)
200 250 300 350 400 450 500 550
100
150
200
250
300
350
50
0
Wavelength, nm
Radiated Power, W/10 nm
H Bulb (13 mm)
200 250 300 350 400 450 500 550
100
150
200
250
300
350
50
0
Wavelength, nm
Radiated Power, W/10 nm
H+ Bulb (13 mm)
200 250 300 350 400 450 500 550
100
150
200
250
300
350
50
0
Wavelength, nm
Radiated Power, W/10 nm
D Bulb (13 mm)
200 250 300 350 400 450 500 550
100
150
200
250
300
350
50
0
Wavelength, nm
Radiated Power, W/10 nm
V Bulb (13 mm)
200 250 300 350 400 450 500 550
100
150
200
250
300
350
50
0
Wavelength, nm
Radiated Power, W/10 nm
Q Bulb (13 mm)
200 250 300 350 400 450 500 550
100
150
200
250
300
350
50
0
Wavelength, nm
Radiated Power, W/10 nm
M Bulb (13 mm)
200 250 300 350 400 450 500 550
100
150
200
250
300
350
50
0
Wavelength, nm
Radiated Power, W/10 nm
H Bulb (13 mm)
200 250 300 350 400 450 500 550
100
150
200
250
300
350
50
0
Wavelength, nm
Radiated Power, W/10 nm
H+ Bulb (13 mm)
200 250 300 350 400 450 500 550
100
150
200
250
300
350
50
0
Wavelength, nm
Radiated Power, W/10 nm
D Bulb (13 mm)
200 250 300 350 400 450 500 550
100
150
200
250
300
350
50
0
Wavelength, nm
Radiated Power, W/10 nm
V Bulb (13 mm)
200 250 300 350 400 450 500 550
100
150
200
250
300
350
50
0
Wavelength, nm
Radiated Power, W/10 nm
Q Bulb (13 mm)
200 250 300 350 400 450 500 550
100
150
200
250
300
350
50
0
Wavelength, nm
Radiated Power, W/10 nm
M Bulb (13 mm)
200 250 300 350 400 450 500 550
100
150
200
250
300
350
50
0
Wavelength, nm
Refle
ctan
ce, P
erce
nt200 250 300 350 400 450 500 550 600 650 700
100
80
60
40
UltravioletVisible Infrared
DICHROIC
R500
A variation of the standard F10T. Its design provides the following benefits: ∏ A fixed skirt provides additional light shielding and end
fittings for the quartz tube, which remains in place when the F10T2 is detached.
∏ A 10" quartz tube may be easily removed from the front. ∏ The fixed quartz tube allows observation of the product in
place, condition of quartz tube, and reflector.
Available for all Heraeus Noblelight Lamps: ∏ F300S: 1.8 kW, 6-inch (300 watt/inch) lamps are
compact, ideal for small systems; ∏ LightHammer® 6 Mark II: 3 kW, 6-inch (500 watt/inch)
lamps are compact, high power and come with a solid-state variable power supply;
∏ F450T, VPS/I250: 3 kW, 10-inch (300 watt/inch) lamps provide the highest irradiance per watt of any lamp system;
∏ F600S, VPS/I600: 6 kW, 10-inch (600 watt/inch) lamps provide higher total power and a larger target size. Two-power level control (F600S) or variable power control (VPS/I600) are available.
Quick StartThe microwave-powered lamp is well known for its ability to develop full power output within a few seconds. It can be turned off instantly and can be restarted almost immediately.
10" System
F10T2 F10T I250 P/W
INTEGRALPRESSUREBLOWER
INLETFILTER
INLETFILTER
EXHAUSTBLOWER
EXHAUSTBLOWER
REMOTEPRESSUREBLOWER
REMOTEINLETFILTER EXHAUST
BLOWER
EXHAUSTBLOWER
INLETFILTER
I250 F/ W
I250 E/ W
I600 P/ W
I250 B/ W
I300 P/ W
I300 B/ W
INLETFILTER
REMOTEPRESSUREBLOWER
INTEGRALPRESSUREBLOWER
INLETFILTER
EXHAUST
EXHAUSTBLOWER
EXHAUSTBLOWER
10-INCH LAMPS
6-INCH LAMPS
107 mm (4.2 in.)
273 mm (10.7 in.)
202 mm (8 in.)
107 mm (4.2 in.)
202 mm (8 in.)
273 mm (10.7 in.)
200 mm (7.9 in.)
267 mm (10.5 in.)
384 mm (15.1 in.)
200 mm (7.9 in.)
267 mm (10.5 in.)
333 mm (13.1 in.)
I600 P/W
F10T2 Reflector System
We
rese
rve
the
right
to in
corp
orat
e ch
ange
s an
d im
prov
emen
ts w
ithou
t not
ice.
HNG
UVP
35 E
N/01
.19/
Cuet
o_Re
edTe
flon
is a
regi
ster
ed tr
adem
ark
of T
he C
hem
ours
Com
pany
. Lig
htHa
mm
er is
a re
gist
ered
trad
emar
k of
Her
aeus
Nob
lelig
ht A
mer
ica
LLC.
TUBE LIGHT SHIELD(WITHOUT QUARTZ TUBE)
TUBE HOLDER SS
TUBE
ENDPLATE
QUARTZ TUBE RETAINERWITH TUBE LIGHT SHIELD
COVERPLATE QUARTZ
TUBERETAINER SS
TUBE
ENDPLATE
TUBEHOLDER
QUARTZ TUBE RETAINER
QUARTZTUBERETAINER
COVERPLATE
ENDPLATE
QUARTZ TUBE RETAINERWITH ADJUSTABLE IRIS
COVERPLATE QUARTZ
TUBERETAINER
ENDPLATE
IRISASSEMBLY
IRISMOUNT
TUBE LIGHT SHIELD(WITHOUT QUARTZ TUBE)
TUBE HOLDER
SSTUBE
ENDPLATE
QUARTZ TUBE RETAINERWITH TUBE LIGHT SHIELD
COVERPLATE QUARTZ
TUBERETAINER SS
TUBE
ENDPLATE
TUBEHOLDER
QUARTZ TUBE RETAINER
QUARTZTUBERETAINER
COVERPLATE
ENDPLATE
QUARTZ TUBE RETAINERWITH ADJUSTABLE IRIS
COVERPLATE QUARTZ
TUBERETAINER
ENDPLATE
IRISASSEMBLY
IRISMOUNT
TUBE LIGHT SHIELD(WITHOUT QUARTZ TUBE)
TUBE HOLDER SS
TUBE
ENDPLATE
QUARTZ TUBE RETAINERWITH TUBE LIGHT SHIELD
COVERPLATE QUARTZ
TUBERETAINER SS
TUBE
ENDPLATE
TUBEHOLDER
QUARTZ TUBE RETAINER
QUARTZTUBERETAINER
COVERPLATE
ENDPLATE
QUARTZ TUBE RETAINERWITH ADJUSTABLE IRIS
COVERPLATE QUARTZ
TUBERETAINER
ENDPLATE
IRISASSEMBLY
IRISMOUNT
TUBE LIGHT SHIELD(WITHOUT QUARTZ TUBE)
TUBE HOLDER SS
TUBE
ENDPLATE
QUARTZ TUBE RETAINERWITH TUBE LIGHT SHIELD
COVERPLATE QUARTZ
TUBERETAINER SS
TUBE
ENDPLATE
TUBEHOLDER
QUARTZ TUBE RETAINER
QUARTZTUBERETAINER
COVERPLATE
ENDPLATE
QUARTZ TUBE RETAINERWITH ADJUSTABLE IRIS
COVERPLATE QUARTZ
TUBERETAINER
ENDPLATE
IRISASSEMBLY
IRISMOUNT
Air-cooled SystemThe microwave-powered lamp is air cooled; push-pull cooling is recommended. The quartz tube is held by a Teflon® gasket which seals it from outside air. The lamp and reflector system are cooled by means of both positive and negative-pressure blowers, which direct the cooling air through the lamp.
Multiple Power LevelsSeveral systems can operate at multiple power levels: The F600S system provides a user-selectable setting of 65% and 100% of full power to the irradiator. The VPS power supply provides continuously adjustable power in the range of 35% to 100% of full power.
In a multi-lamp system, any lamp can be switched on or off, providing an even wider range of power control. Lamp modules can be energized in sequence and coordinated with line speed.
End PlatesThe F10T, F10T2, and F6 housings are equipped with flat end plates, to which fittings and attachments are mounted. A variety of fittings may be selected and supplied by Heraeus Noblelight, or may be user-designed.
GRID:1 MM/DIVISION
RELATIVEIRRADIANCEUNITS
QUARTZ TUBE
12
8
14
8 10
“ISO-IRRADIANCE” DIAGRAM
(Relative UV Intensity) Typical of High Performance DRF Systems
End Fittings AvailableA number of end fittings and options are available, which include sealing and support rings for quartz tubes, nitrogen ports, adjustable irises for light shielding, and straight tube light shields.
Lamp Mounting and AlignmentLamps can be mounted and operated in any position. The lamp housing has two sets of four threaded inserts for easy attachment to the lamp mounting and alignment plate of the user’s machine.
TUBE LIGHT SHIELD(WITHOUT QUARTZ TUBE)
TUBE HOLDER SS
TUBE
ENDPLATE
QUARTZ TUBE RETAINERWITH TUBE LIGHT SHIELD
COVERPLATE QUARTZ
TUBERETAINER SS
TUBE
ENDPLATE
TUBEHOLDER
QUARTZ TUBE RETAINER
QUARTZTUBERETAINER
COVERPLATE
ENDPLATE
QUARTZ TUBE RETAINERWITH ADJUSTABLE IRIS
COVERPLATE QUARTZ
TUBERETAINER
ENDPLATE
IRISASSEMBLY
IRISMOUNT
TUBE LIGHT SHIELD(WITHOUT QUARTZ TUBE)
TUBE HOLDER SS
TUBE
ENDPLATE
QUARTZ TUBE RETAINERWITH TUBE LIGHT SHIELD
COVERPLATE QUARTZ
TUBERETAINER SS
TUBE
ENDPLATE
TUBEHOLDER
QUARTZ TUBE RETAINER
QUARTZTUBERETAINER
COVERPLATE
ENDPLATE
QUARTZ TUBE RETAINERWITH ADJUSTABLE IRIS
COVERPLATE QUARTZ
TUBERETAINER
ENDPLATE
IRISASSEMBLY
IRISMOUNT
Contact your local Heraeus Noblelight office for an engineered solution for your specific requirements.
USA
Heraeus Noblelight America LLC
910 Clopper Road
Gaithersburg, Maryland
20878-1357
Phone +1 301 527 2660
Fax +1 301 527 2661
www.heraeus-noblelight.com/uvamericas
Germany
Heraeus Noblelight GmbH
Heraeusstraße 12-14
63450 Hanau
Phone +49 6181 35 4499
Fax +49 6181 35 9926
www.heraeus-noblelight.com
Japan
Heraeus K.K.
Noblelight Division
Sumitomo Fudosan Otowa
Building 1F, 2F, 5F
2-9-3 Otsuka, Bunkyo-ku
112-0012, Tokyo
Phone +81 3 6902 6602
Fax +81 3 6902 6613
www.heraeus-noblelight.jp
China
Heraeus Noblelight (Shenyang) Ltd.
Shanghai Branch
2F, 5th Building, No. 406 Guilin Rd
Xuhui District
Shanghai 200233, P.R. China
Phone +86 400 080 2255
Fax + 86 21 3357 5333
www.heraeus-noblelight.com
ISO 9001 Certified QMS