HEMAKULHEMAKUL Pioneers in the manufacturing of Cable Pulling Grips in India,

having commenced business operations in the year 1985 and founded by Mr M K Bhatia, backed by 30 years of experience in the cable industry which included training and various projects in Germany and the United Kingdom.

Defining Cable Grips

Cable grips - sometimes called cable stockings or cable socks - provide an efficient method of supporting and pulling cables. They are re-usable tools (subject to inspection before re-use) and are not confined to cable applications but basically can be used to support or pull any cylindrical object within their grip and load carrying capacity.

Hemakul standard cable grips are manufactured from high tensile galvanized and stainless steel wire rope. A skilled, hand woven construction process, coupled with individual product inspection throughout manufacture, ensures a high quality product for reliable and long lasting application.

Cable support grips

Cable Support Grips used in Wind Turbines

Actual break loads (tonnes) are quoted, as a guide only, for cable grips.

Application load is normally calculated to be reduced by at least a factor of five times the actual break load.

Due to the wide variety of application parameters, the end user must apply a sensible safety factor to suit the safety requirements for the conditions of use.

Application Load Capacity

When the correct cable grip is selected, cable installation through ducts, conduits and trenches is made considerably easier.

Cable grips can often be used on a 'new for old' cable replacement by applying two grips on a 'back-to-back' basis with a solid link or swivel in between socks, allowing the old cable to be used to pull through the new replacement.

Swivel links can be used to allow for reduced torque build-up induced by the pulling equipment and inherent lay in the cables themselves.

Lace up cable grips can be applied anywhere along the cable length, preventing overloading of the cable.

Pulling ApplicationsPulling Applications

The fit of cable grips is the same as for pulling applications except that supporting socks normally stay in place, taking up support strain load.

They can be of a single or double weave type according to the load to be supported and can have one or two supporting 'eyes' depending on the available anchor points and the disposition of the load.

Due to the constant load bearing nature of a supporting application, allow for a 'factor of safety' of 10 and arrange for regular recorded inspection of the cable grip's 'condition of safety' throughout its active life.+

Supporting applicationsSupporting applications

Product Applications

Cable Strain Relief

Oil Support Cables

Marine Applications

Cable Support Sleeves

Conduit Risers

Fiber Optic Cable Applications.

Target Users

Trench Cable Laying Operators

Oil Rig Operators

Pipe Laying Contractors

Wind Turbine Manufacturers

Marine/Off Shores Contractors Winch & Elevator Manufacturers.

Products            We take the initiatives to study the market requirements and fulfill the industry needs by

manufacturing customer oriented Cable Accessories. Our product range comprises

of the following:

Standard Cable Pulling Stocking Stroke Grip

Swivel Eye Grip

Double Loop Stocking

Lace Up Stocking

Double Mouth Stocking

Open Ended Grip

Double Eye Grip

Fiber Optic Cable Grips

Rope & Stockings

Cable Pulling Hoses

Cable Accessories

Anti-Twist Device.

Hemakul has specifically designed the OS – Type cable support grips in

various sizes to suit the requirements of Suzlon Energy Ltd for their

wind turbines.

We aim at precision & complete customer satisfaction.

Our product is manufactured from high tensile stainless

steel (AISI GRADE 304/316) wire rope. The

manufacturing process consists of a sophisticated team

of technicians skilled to manufacture hand woven grips.

These grips are tested to support cables of various

diameters At internationally recognized engineering

labs. Individual product inspection throughout

manufacture process ensures best quality product, for a

reliable and long lasting application.

The product – OS – Type Cable Support Grip

OS Cable assembly stockings serve as suspension cables in industrial heavy & light equipment,

cable shafts, etc. this cable assembly system enables support at complicated attachment points,

wherein the braid covers a larger area of the cable, facilitating heavy weighted cable drops from

heights.

Design specific OS Cable Grips made for Suzlon Energy Limited are far superior in terms of

quality and design.

Distinctive Features

High Tensile Stainless Steel Wire for its anti corrosive properties and workability at low temperatures up to – 45 degrees Centigrade

A Stainless Steel Thimble for extra Strength whereby the stainless steel wire (from the braid) is woven around it to provide extra support after crimping.

The portion of the wires on the thimble is covered with a silicon jacket, specifically designed to sustain extremely high & low temperatures.

A double ferrule crimping of the assembly ensures double safety.

Certificate of conformance from Enercon India Ltd.

Specifications

Design/Part no.

Cable Diameter

[mm]

Breakload[kN]

Braid Length

L1 [mm]

Overall Length

L 2 [mm]

HES – 12 9 - 12 6.76 135 340

HES - 19 15 - 19 9.28 220 450

HES - 25 19 - 25 6.00 275 510

HES - 30 25 - 30 6.32 350 610

HES - 40 30 - 40 9.32 370 660

COMPARATIVE TABLESPECS HES

12

SZ

12

HES

19

SZ

19

HES

25

SZ

25

HES

30

SZ

30

HES

40

SZ

40

WIRE ROPE / DIA

CONSTRUCTION

FERRULE

THIMBLE

UTS OF STRAND

BREAKING LOAD

List of clients

Enercon India Ltd. Nicco Corporation. Finolex Cables. Oman Cable Company. Sterlite Cables. Universal Cables. Uniflex Cables. Usha Martin Cables. Seair Impex.

Contact us at:

Hemakul

303, Visha Villa,

Laburnum Road,

Gamdevi, Mumbai -400 007

MAHARASHTRA, INDIA

Tel: +91 22 23878213 / +91 98676 97840

Telefax: : +91 22 23878213

Key Personnel: Mukul Bhatia

Cell: +91 98210 97840

Warning: Please note: Hemakul cable grips must not to be used as a primary lifting device.