HEDELIUS RS 100 K Celox Magnum

KISTNER GmbH & Co. KG | Industriestraße 7-9 95349 Thurnau | +49 92289870 | www.maschinen-kistner.de

2

MACHINE INFO

Manufacturer Type Year of manufacture Control Machine number

Travels

Swivel range NC table

Working area machine table Tool magazine Tool holders SK 50 Internal coolant system

HEDELIUS RS 100 K Celox Magnum | | 2

EQUIPMENT and TECHNICAL DATA

Machine description and data RotaSwing 100 K Celox machining center with 50-slot tool magazine and integrated rotary swivel table unit for the simultaneous 5-axes machining

Rotary table dimensions Ø 1.000 x 800 mm

Noise edge diameter 1.100 mm

T-grooves ISO 266 18 mm

Number of T-grooves 1/7 pieces

Aligning groove 18H8

Distance of the T-grooves 110 mm

Centering bore 40H7 x 15 mm

Swivel area +10° to -90°

Swivel speed 90° 2,5 sec

Rotary speed 10 rpm

Torque swiveling 5.000 Nm

Torque dividing 3.500 Nm

Chucking weight max 1.500 kg

Chip conveyor – Drop height 1.150 mm

Pump power (drop side: right) 1 bar / 100 1/min

Linear guiding system

Main spindle: water cooled Celox motor spindle

Main spindle drive 30 – 12.000 rpm

Free programmable spindle positioning

Tool magazine (50-slot capacity)

- Max. tool weight - Tool length SK 50 - Max. tool diameter - Tool changing time - Chip-to-chip time

15 kg 330 mm 100 mm approx. 4 sec approx. 10 sec

| 3 HEDELIUS RS 100 K Celox Magnum |

| 4 HEDELIUS RS 100 K Celox Magnum |

Measuring system: Diadur phase grating measuring system on the X, Y and Z axes, incremental angular encoder on the A and B axes with an accuracy of measurement of > 3 μm or < 3‘‘

Hand controller for TNC 530

Compressed air nozzle on the spindle head

Full enclosure with extraction device 100 x 3500/2

3D probe – (switching 30-pen, complete with 2 infrared transmitting and receiving units, 9V battery and wooden box) Scanning direction Scanning speed Ball diameter

RENISHAW MP10 +-X, +-Y, -Z 3 m/min 6 mm (ruby)

Central coolant supply through the working spindle

Pump power A Pump power B

80 bar / 25 l/min 2,5 bar / 150 l/min

Programmable coolant device pressure 10 – 80 bar

Hydraulic clamping with 2 clamping circuits RS Kombi

Possibility to work in parallel mode

Tool breakage detection

User guide / Documentation

Machine parameters on CD

MACHINE PICTURES

| 5 HEDELIUS RS 100 K Celox Magnum |

| HEDELIUS RS 100 K Celox Magnum | 6

Thank you very much for your interest

*We do not guarantee the accuracy and completeness of these documents. We further do not assure any characteristics and qualities. The named machine, which is up for sale, is used.*

KISTNER GmbH & Co. KG | Industriestrasse 7-9 95349 Thurnau | +49 92289870 | www.maschinen-kistner.de