heavy equipment inspection checklist

This is to certify that the plant being supplied conforms to the relevant HSE Legislation, and the requirements as detailed above. HSE Department will assess this Pre-start Checklist to ensure the supplier has verified compliance to HSE Legislative requirements and, to register the plant onto the site. The operator will be required to participate in ongoing training and perform work in accordance with the relevant Work Method Statement. Should the plant be found to not conform to the above, then it will be prevented from commencing work on the site until the non-compliance is rectified. HSE Management will not reimburse the Owner / Supplier / Contractor for any down / lost time so caused from the non-conformance.

This form does not remove any liability for the plant supplier to conform with the relevant HSE Legislation

Mobile Plant Prestart Checklist

ARTICULATED DUMP TRUCK

Statement of Operator Competence - Required

Form: HSE-INSP-0001

Issue No.:

Date:

Supplier Verification & Plant Details

Plant Supplier

Phone Number

Plant Make

Plant Model

Plate No.

Name

Signature:

Date

Plant to conform to manufacturers specifications and HSE Plant

Regs. Plant Operator is to provide daily checksheets to HSE. Where applicable, Personal Protective Equipment must be worn. Plant Log Book Detailing service history in accordance with

Manufacturers specifications should be written legibly in English.

Contractor must produce proof of competence of operator, e.g., Certificate of Competence, Licence, Detailed Log Book

HSE Use Only

NOTE: Sign only when all items have been checked

Plant Check By: Position: Date: / /

Instructions: Verify Box to be ticked by Owner / Supplier / Operator prior to arrival on site. Check Box to be ticked after visual inspection by HSE Department

Verify Check CAB Cleanliness Seat Condition OK Operator Restraint Provided Instruments Operational & Labelled Levers / Controls Operational Pedals in Good Condition ROPS (Roll Over Protective Structure) Windows / Wipers / Washers Rear View Mirrors Operator Instruction (available on plant)

Verify Check

Handrails Steps

Verify Check

(Signs on both sides of vehicle)

KEEP CLEAR

Verify Check

Exhaust

WARNING DEVICES Verify Check Horn Reversing Alarm

Verify Check WARNING SIGNS (In Cabin)

SEAT BELTS

Note : Register if to be used on Public Roads

Verify Check

Tyres Wheels Brakes Park Brake Verify Check

Rams Hoses

Connections (check for excessive wear,

and leaks)

Hydraulics


This form does not remove any liability for the plant supplier to conform with the relevant HSE Legislation.


BACKHOE

Statement of Operator Competence Required

Form: HSE-INSP-0002

Issue No.:

Date:


Plant Supplier

Phone Number

Plant Make

Plant Model

Plate No.

Name

Signature:

Date

Plant to conform to manufacturers specifications and HSE Regs. Plant Operator is to provide daily checksheets to HSE. Where applicable, Personal Protective Equipment must be worn. Plant Log Book Detailing service history in accordance with



HSE Use Only



Instructions: Verify Box to be ticked by Owner / Supplier / Operator prior to arrival onsite. Check Box to be ticked after visual inspection by HSE Department

Verify Check CAB Cleanliness Seat Operator Restraint Instruments & Labelling Levers / Controls Pedals ROPS (Roll Over Protective Structure) Windows / Wipers / Washers Rear View Mirrors

Verify Check

(Signs on both sides of vehicle)

KEEP CLEAR

Verify Check

Stabilisers

Verify Check

Tyres Wheels Brakes

Park Brake

Verify Check

Handrails Steps

Verify Check

Rams Hoses


and leaks)

Hydraulics

Verify Check

SWL

WARNING DEVICES Verify Check Horn Amber Flashing Beacon Reversing Alarm


SEAT BELTS

Verify Check

DANGER BEWARE OVERHEAD WIRES & UNDERGROUND SERVICES

Verify Check

Pivots Connecting Rods Safety Pins (no excessive wear)

Verify Check

SWL Crane Chart

Verify Check

Engine Guarding

Verify Check

Exhaust

Hydraulics Verify Check Rams Hoses Connections (check for excessive wear and leaks)

Verify Check

Travelling Hitch

Verify Check

Connecting Rods & Safety Pins

SWL

Verify Check

Quick Hitch Safety Pins (where applicable)

This is to certify that the plant being supplied conforms to the relevant HS&E Legislation, and the requirements as detailed above. HSE Department will check this Pre-start Checklist to ensure the supplier has verified compliance to Legislative requirements and, to register the plant onto the site. The operator will be required to participate in ongoing training and perform work in accordance with the relevant Work Method Statement. Should the plant be found to not conform to the above, then it will be prevented from commencing work on the site until the non-compliance is rectified. HSE Management will not reimburse the Owner / Supplier / Contractor for any down / lost time so caused from the non-conformance.



COMPACTOR


Form: HSE-INSP-0003

Issue No.:

Date:

Supplier Verification & Plant Details Plant Supplier

Phone Number

Plant Make

Plant Model

Serial No.

Name

Signature:

Date





HSE Office Use Only




Verify Check

Handrails Steps

Verify Check WARNING DEVICES Horn Reversing Alarm


SEAT BELTS Verify Check

DANGER SAFE WORKING LIMITS

ON BATTERS Ratio 2 to 1 Eg only As per Manufacturers Specifications

Verify

CAB Cleanliness Seat Condition OK Operator Restraint Provided Instruments Operational & Labelled Levers / Controls Operational Pedals in Good Condition ROPS (Roll Over Protective Structure) Windows / Wipers / Washers Rear View Mirrors Operator Instruction (available on plant)

Verify Check

Exhaust

Verify Check

Engine Guarding

Hydraulics Verify Check Rams Hoses Connections (check for excessive wear, and leaks)

Verify Check Crush Point Hazard Sign displayed both sides

Verify Check

Brakes Park Brake

This is to certify that the plant being supplied conforms to the relevant HSE Legislation, and the requirements as detailed above. HSE Department will check this Pre-start Checklist to ensure the supplier has verified compliance to HSE Legislative requirements and, to register the plant onto the site. The operator will be required to participate in ongoing training and perform work in accordance with the relevant Work Method Statement. Should the plant be found to not conform to the above, then it will be prevented from commencing work on the site until the non-compliance is rectified. HSE Management will not reimburse the Owner / Supplier / Contractor for any down / lost time so caused from the non-conformance.



BULL DOZER


Form: HSE-INSP-0004

Issue No.:

Date:


Plant Supplier

Phone Number

Plant Make

Plant Model

Serial No.

Name

Signature:

Date





HSE Use Only





Verify Check

Pivots Pins Connections Safety Pins

Verify Check

Tracks Complete Idlers Adjusted

Drivers Free from Leaks

Tracks

Verify Check

Handrails Steps



SEAT BELTS

Verify Check


Verify Check

Rams Hoses Connections (check for excessive wear, leaks and creep)

Verify Check

Exhaust

Verify Check

Engine Guarding

This is to certify that the plant being supplied conforms to the relevant HSE Legislation, and the requirements as detailed above. HSE will assess this Pre-start Checklist to ensure the supplier has verified compliance to Legislative requirements and, to register the plant onto the site. The operator will be required to participate in ongoing training and perform work in accordance with the relevant Work Method Statement. Should the plant be found to not conform to the above, then it will be prevented from commencing work on the site until the non-compliance is rectified. HSEManagement will not reimburse the Owner / Supplier / Contractor for any down / lost time so caused from the non-conformance.



DRUM ROLLER


Form: HSE-INSP-0005

Issue No.:

Date:


Plant Supplier

Phone Number

Plant Make

Plant Model

Serial No.

Name

Signature:

Date





HSE Use Only




CAB Verify Cleanliness

Seat Condition OK Operator Restraint Provided Instruments Operational & Labelled Levers / Controls Operational Pedals in Good Condition ROPS (Roll Over Protective Structure) Windows / Wipers / Washers Rear View Mirrors Operator Instruction (available on plant)

Verify Check

Hoses Connections (check for excessive wear and leaks)

Hydraulics


Verify Check

Handrails Steps



SEAT BELTS

Verify Check DANGER SAFE WORKING LIMITS ON BATTERS

Ratio 4 to 1 Eg only As per Manufacturers Specifications

Verify Check

Locating lock for Low/Neutral/Lower Range Pad lock provided Warning sign Hasp must be locked in position before operating

Verify Check

Exhaust

Verify Check

Tyres Wheels Brakes

Park Brake

Verify Check

Engine Guarding

This is to certify that the plant being supplied conforms to the relevant HSE Legislation, and the requirements as detailed above. HSE Department will assess this Pre-start Checklist to ensure the supplier has verified compliance to Legislative requirements and, to register the plant onto the site. The operator will be required to participate in ongoing training and perform work in accordance with the relevant Work Method Statement. Should the plant be found to not conform to the above, then it will be prevented from commencing work on the site until the non-compliance is rectified. HSE Management will not reimburse the Owner / Supplier / Contractor for any down / lost time so caused from the non-conformance.



ELEVATING WORK PLATFORM Knuckle Boom


Form: HSE-INSP-0006

Issue No.:

Date:


Sub-con name

Phone Number

Plant Make

Plant Model

Serial No.

Name

Signature:

Date





HSE Use Only




WARNING DEVICES Verify Check Horn Amber Flashing Beacon Motion Alarms Raise & Lower Alarms Out of Level Alarm

Verify Check BASKET Cleanliness Operator Restraint Instruments & Labelling Levers / Controls Pedals Log Book Deadman Switch Operation Instruction (available on plant)

Verify Check

Tyres Wheels Brakes

Park Brake

Verify Check WARNING SIGNS

Harness Available

Verify Check DANGER BEWARE OVERHEAD WIRES

&SERVICES

Hydraulics Verify Check Rams Hoses Connections (check for excessive Wear and leaks)

Verify Check


Verify Check

SWL / Crane Chart

Verify Check

Safety Harness & Lanyard

Verify Check

Exhaust (if applicable)

Verify Check

Levers / Controls

Verify Check

Rams Hoses


leaks and creep)

Hydraulics

Verify Check

Engine Guarding




ELEVATING WORK PLATFORM Scissor Lift


Form: HSE-INSP-0007

Issue No.:

Date:


Plant Supplier

Phone Number

Plant Make

Plant Model

Serial No.

Name

Signature:

Date





HSE Use Only




WARNING DEVICES Verify Check Horn Amber Flashing Beacon (when onsite) Reversing Alarm Head, Tail & Turn Indicators

Verify Check BASKET Cleanliness Instruments & Labelling Levers / Controls Basket & Base Pedals Log Book Operation Instruction (available on plant)

Verify Check


Verify Check

Engine Guarding

Verify Check

Tyres Wheels Brakes

Park Brake

Verify Check

Levers / Controls

Verify Check WARNING & RESTRICTION SIGNS

Verify Check

Safety Working Load

Verify Check

Self Closing Gate


Verify Check

Exhaust (if applicable)

Verify Check

Safety Prop Under Scissor

Verify Check

Guarding Of Scissor

This is to certify that the plant being supplied conforms to the relevant HSE Legislation, and the requirements as detailed above. HSE will assess this Pre-start Checklist to ensure the supplier has verified compliance to Legislative requirements and, to register the plant onto the site. The operator will be required to participate in ongoing training and perform work in accordance with the relevant Work Method Statement. Should the plant be found to not conform to the above, then it will be prevented from commencing work on the site until the non-compliance is rectified. HSE Management will not reimburse the Owner / Supplier / Contractor for any down / lost time so caused from the non-conformance.

This form does not remove any liability for the plant supplier to conform with the relevant RoK OH&S Legislation


EXCAVATOR


Form: HSE-INSP-0008

Issue No.:

Date:


Plant Supplier

Phone Number

Plant Make

Plant Model

Serial No.

Name

Signature:

Date





HSE Use Only




Hydraulics Verify Check Rams Hoses Connections (check for excessive wear, leaks and creep)

Verify Check

Handrails Steps

Verify Check



Tracks

WARNING DEVICES Verify Check Horn Amber Flashing Beacon Motion Alarm


SEAT BELTS


& UNDERGROUND SERVICES Hydraulics Verify Check Rams Hoses Connections (check for excessive wear and leaks)

Verify Check

SWL / Crane Chart

Verify Check


CAB Verify Check Cleanliness Seat Condition OK Operator Restraint Provided Instruments Operational & Labelled Levers / Controls Operational Pedals in Good Condition ROPS (Roll Over Protective Structure) Windows / Wipers / Washers Rear View Mirrors Operator Instruction (available on plant)

Verify Check

Exhaust Verify Check

Engine Guarding

Verify Check

Quick Hitch Safety Pins (where applicable) (If Quick Hitch is fitted NO LIFTING POINTS Allowed on back of bucket




GRADER


Form: HSE-INSP-0009

Issue No.:

Date:


Plant Supplier

Phone Number

Plant Make

Plant Model

Plate No.

Name

Signature:

Date

Plant to conform to manufacturers specifications and RoK Plant

Regs. Plant Operator is to provide daily checksheets HSE. Where applicable, Personal Protective Equipment must be worn. Plant Log Book Detailing service history in accordance with



HSE Use Only







SEAT BELTS

Verify Check SAFE WORK LIMIT ON BATTERS Ratio 2 to 1 Ratio 2 to 1 e.g. only As per Manufacturers Specifications

Verify Check

Pivots Pins Connections Safety Pins

Verify Check

Handrails Steps

Verify Check

Tyres Wheels Brakes

Park Brake

Verify Check

Engine Guarding


Hydraulics Verify Check Rams Hoses Connections (check for excessive wear and leaks)

Verify Check

Exhaust

Verify Check

Unions Rods Connections

Steering

Verify Check

Drive Guards

This is to certify that the plant being supplied conforms to the relevant HSE Legislation, and the requirements as detailed above. HSE Department will check this Pre-start Checklist to ensure the supplier has verified compliance to HSE Legislative requirements and, to register the plant onto the site. The operator will be required to participate in ongoing training and perform work in accordance with the relevant Work Method Statement. Should the plant be found to not conform to the above, then it will be prevented from commencing work on the site until the non-compliance is rectified. HSE Management will not reimburse the Owner / Supplier / Contractor for any down / lost time so caused from the non-conformance.



FRONT END LOADER


Form: HSE-INSP-0010

Issue No.:

Date:


Plant Supplier

Phone Number

Plant Make

Plant Model

Serial No.

Name

Signature:

Date





HSE Use Only




Verify Check CAB Cleanliness Seat Condition OK Operator Restraint Provided Instruments Operational & Labelled Levers / Controls Operational Pedals in Good Condition ROPS Windows / Wipers / Washers Rear View Mirrors Operator Instruction (available on plant)

Verify Check

SWL if used as Crane Lift point




SEAT BELTS



Verify Check


Verify Check

Exhaust

Verify Check

Engine Guarding


Verify Check

Handrails Steps

Verify Check

Tyres Wheels Brakes

Park Brake

This is to certify that the plant being supplied conforms to the relevant HSE Legislation, and the requirements as detailed above. HSE Department will check this Pre-start Checklist to ensure the supplier has verified compliance to Legislative requirements and, to register the plant onto the site. The operator will be required to participate in ongoing training and perform work in accordance with the relevant Work Method Statement. Should the plant be found to not conform to the above, then it will be prevented from commencing work on the site until the non-compliance is rectified. HSE Management will not reimburse the Owner / Supplier / Contractor for any down / lost time so caused from the non-conformance.

This form does not remove any liability for the plant supplier to conform with the relevant Legalisation


MOBILE CRANE


Form: HSE-INSP-0011

Issue No.:

Date:


Plant Supplier

Phone Number

Plant Make

Plant Model

Serial No.

Name

Signature:

Date

Plant to conform to manufacturers specifications and Vic Plant




HSE Use Only




Verify Check CAB Cleanliness Seat Condition OK Operator Restraint Provided Instruments Operational & Labelled Levers / Controls Operational Pedals in Good Condition ROPS (Roll Over Protective Structure) Windows / Wipers / Washers Rear View Mirrors Operator Instruction (available on plant) Log Book SWL / Crane Chart

Verify Check

Hambone & Wedge

Verify Check

Slings / Ropes / Chains (Tagged and in good working order) Electrical Wiring (No visual signs of damage) Steel or Timber Pads

Verify Check

Handrails Steps Verify Check

Outriggers & Rams Operational



SEAT BELTS

Verify Check

DANGER BEWARE OVERHEAD WIRES, PIPES and SERVICES

Verify Check


Boom

Verify Check

Engine Guarding


Verify Check

Tyres Wheels Brakes Park Brake

Verify Check

Slew Radius / Barricading for around Outriggers

Verify Check

Exhaust




MULTI-WHEEL ROLLER


Form: HSE-INSP-0012

Issue No.:

Date:


Plant Supplier

Phone Number

Plant Make

Plant Model

Serial No.

Name

Signature:

Date


Regs. Plant Operator is to provide daily checksheets to HSE Where

applicable, Personal Protective Equipment must be worn. Plant Log Book Detailing service history in accordance with



HSE Use Only





WARNING DEVICES Verify Check Horn Amber Flashing Beacon Motion Alarm


SEAT BELTS

Verify Check

Handrails Steps

Verify Check

Exhaust

Verify Check

Engine Guarding

Verify Check

Tyres Wheels

Park Brake




ROLLER Smooth or Pad Foot


Form: HSE-INSP-0013

Issue No.: 1

Date:


Plant Owner:

Address:

City/Suburb:

Phone:

Plant Make:

Plant Model:

Serial No.:

Signature:


Regs. Plant Operator is to provide daily checksheets to HSE Where applicable, Personal Protective Equipment must be worn. Plant Log Book Detailing service history in accordance with



HSE Use Only





Verify Check

Exhaust

Verify Check

Engine Guarding

Verify Check

Handrails Steps

Hydraulics Verify Rams

Hoses Connections (check for excessive

wear and leaks)

Verify Check WARNING DEVICES Horn Amber Flashing Beacon Reversing Alarm


SEAT BELTS Verify Check

DANGER SAFE WORKING LIMITS ON BATTERS

Ratio 4/1 Eg only As per Manufacturers Specifications

Verify Check

Locating lock for Low/Neutral/Lower Range

Pad lock provided

Warning sign Hasp must be locked in position before

operating


Verify Check

Rubber Mounts (Drum)

Verify Check

Drum Cleaning Rakes

Verify Check

Tyres Wheels Brakes Park Brake




SCRAPER Twin Engine


Form: HSE-INSP-0014

Issue No.:

Date:


Plant Supplier

Phone Number

Plant Make

Plant Model

Serial No.

Name

Signature:

Date


Regs. Plant Operator is to provide daily checksheets to HSE Where applicable, Personal Protective Equipment must be worn. Plant Log Book Detailing service history in accordance with



HSE Use Only




Verify

CAB Cleanliness Seat Condition OK Operator Restraint Provided Instruments Operational & Labelled Levers / Controls Operational Pedals in Good Condition ROPS (Roll Over Protective Structure) Windows / Wipers / Washers Rear View Mirrors Operator Instruction (available on plant)



SEAT BELTS

Verify Check

Handrails Steps


Verify Tyres

Wheels Brakes Park Brake


Verify Check

Exhaust Verify Check

Exhaust

Verify Check

Pivots Connecting Rods

Safety Pins (no excessive wear)

This is to certify that the plant being supplied conforms to the relevant HSE Legislation, and the requirements as detailed above. HSE Department will check this Pre-start Checklist to ensure the supplier has verified compliance to HSE Legislative requirements and, to register the plant onto the site. The operator will be required to participate in ongoing training and perform work in accordance with the relevant Work Method Statement. Should the plant be found to not conform to the above, then it will be prevented from commencing work on the site until the non-compliance is rectified. Company Management will not reimburse the Owner / Supplier / Contractor for any down / lost time so caused from the non-conformance.



SCRAPER


Form: HSE-INSP-0015

Issue No.:

Date:


Plant Supplier

Phone Number

Plant Make

Plant Model

Serial No.

Name

Signature:

Date





HSE Use Only





Verify Check

Tyres Wheels Brakes

Park Brake

Hydraulics Verify Check

Rams Hoses Connections



SEAT BELTS


Verify Check

Exhaust

Verify Check

Pivots Connecting Rods

Safety Pins (no excessive wear)

Hydraulics Verify Check Rams Hoses

Connections (check for excessive

Wear and leaks)

Verify Check

Handrails Steps

This is to certify that the plant being supplied conforms to the relevant HSE Legislation, and the requirements as detailed above. HSE Department will assess this Pre-start Checklist to ensure the supplier has verified compliance to HSE Legislative requirements and, to register the plant onto the site. The operator will be required to participate in ongoing training and perform work in accordance with the relevant Work Method Statement. Should the plant be found to not conform to the above, then it will be prevented from commencing work on the site until the non-compliance is rectified. Company Management will not reimburse the Owner / Supplier / Contractor for any down / lost time so caused from the non-conformance.



SKID STEER LOADER


Form: HSE-INSP-0016

Issue No.:

Date:


Plant Supplier

Phone Number

Plant Make

Plant Model

Serial No.

Name

Signature:

Date


Regs. Plant Operator is to provide daily checksheets HSE. Where applicable, Personal Protective Equipment must be worn. Plant Log Book Detailing service history in accordance with



HSE Use Only




Verify Check


Verify Check WARNING DEVICES Horn Amber Flashing Beacon Reversing Alarm

Verify Check CAB Cleanliness Seat Operator Restraint Instruments & Labelling Levers / Controls Pedals Protective Mesh Rear View Mirrors ROPS (Roll Over Protective Structure) Operator Instruction (available on plant)

Verify Check

SWL / Crane Chart

Verify Check

Tyres Wheels Brakes

Park Brake

Verify Check

Exhaust

Verify Check

Engine Guarding

Verify Check Hydraulics Rams Hoses Connections (check for excessive wear and leaks)


SEAT BELTS MUST BE WORN

Verify Check


Verify Check

Rams Hoses


leaks and creep)

Hydraulics

This is to certify that the plant being supplied conforms to the relevant HSE Legislation, and the requirements as detailed above. HSE will check this Pre-start Checklist to ensure the supplier has verified compliance to HSE Legislative requirements and, to register the plant onto the site. The operator will be required to participate in ongoing training and perform work in accordance with the relevant Work Method Statement. Should the plant be found to not conform to the above, then it will be prevented from commencing work on the site until the non-compliance is rectified. HSE Management will not reimburse the Owner / Supplier / Contractor for any down / lost time so caused from the non-conformance.



TRACK LOADER


Form: HSE-INSP-0017

Issue No.:

Date:


Plant Supplier

Phone Number

Plant Make

Plant Model

Serial No.

Name

Signature:

Date





HSE Use Only



Instructions: Verify Box to be ticked by Owner / Supplier / Operator prior to arrival onsite. Check Box to be ticked after visual inspection by HSE Department.

Verify Check

Connecting Rods & Safety Pins

Verify Check

Brakes Park Brake


Verify Check

SWL if used as Crane Lift Point


Verify Check

Tracks Complete Idlers Adjusted Drivers Free from Leaks

Tracks Verify Check



Tracks Verify Check Handrails

Steps

Verify Check

Engine Guarding

Verify Check

Exhaust

Verify Check




SEAT BELTS


& UNDERGROUND SERVICES




TRUCK and TRAILER Articulated Vehicle


Form: HSE-INSP-0018

Issue No.:

Date:


Plant Supplier

Phone Number

Plant Make

Plant Model

Serial No.

Name

Signature:

Date


Regs. Plant Operator is to provide daily checksheets to HSE . Where applicable, Personal Protective Equipment must be worn. Plant Log Book Detailing service history in accordance with



HSE Use Only




Verify Check CABIN Cleanliness Seat Seat Belts Instruments & Labelling Levers / Controls Pedals Windows / Wipers / Washers Rear View Mirror Current Registration Sticker

Air / Hydraulics Verify Check Rams Hoses Connections (check for excessive wear and leaks) Hoist Control from Cabin Tail Gate Control from Cabin

Verify Check

KEEP CLEAR AIR OPERATED TAILGATE

Verify Check

Exhaust

Verify Check

Tyres Wheels Brakes

Park Brake

Verify Check

Handrails Steps

Verify Check

Connecting Rods Safety Pins

(no excessive wear visible

Towing Hitch


SEAT BELTS

WARNING DEVICES Verify Check Horn Amber Flashing Beacon (when onsite) Reversing Alarm Head, Tail & Turn Indicators

Steering Tyres Verify Check No Cuts or Splits Good Tread Condition Not Recaps

01 SECL.INSP 0001 Articulated DTruck CheckMobile PlantARTICULATED DUMP TRUCKStatement of Operator Competence - RequiredSupplier Verification & Plant Details

SEAT BELTSHydraulicsCABWARNING SIGNS (In Cabin)WARNING DEVICESHSE Use Only

02 SECL.INSP 0002 BackHoe CheckMobile PlantBACKHOEStatement of Operator Competence RequiredSupplier Verification & Plant Details

HydraulicsCABHydraulicsSWLDANGER BEWARE OVERHEAD WIRESSEAT BELTS

WARNING SIGNS (In Cabin)WARNING DEVICESHSE Use Only

03 SECL.INSP 0003 Compactor CheckMobile PlantCOMPACTORStatement of Operator Competence - RequiredSupplier Verification & Plant Details

CABHydraulicsRatio 2 to 1SEAT BELTS

WARNING SIGNS (In Cabin)WARNING DEVICESHSE Office Use Only

04 SECL.INSP 0004 BullDozer CheckMobile PlantBULL DOZERStatement of Operator Competence RequiredSupplier Verification & Plant Details

CABTracksDANGER BEWARE OVERHEAD WIRESSEAT BELTS


05 SECL.INSP 0005 DrumRoller CheckMobile PlantDRUM ROLLERStatement of Operator Competence - RequiredSupplier Verification & Plant Details

Ratio 4 to 1CABHydraulicsSEAT BELTS


06 SECL.INSP 0006 Elevating Platform CheckMobile PlantELEVATING WORK PLATFORMStatement of Operator Competence - RequiredSupplier Verification & Plant Details

DANGER BEWARE OVERHEAD WIRESBASKETHydraulicsHarness Available

WARNING SIGNSWARNING DEVICESHydraulicsHSE Use Only

07 SECL.INSP 0007 Scissor Lift CheckMobile PlantELEVATING WORK PLATFORMStatement of Operator Competence RequiredSupplier Verification & Plant Details

HydraulicsBASKETWARNING DEVICESHSE Use Only

08 SECL.INSP 0008 Tracked Excavator CheckMobile PlantEXCAVATORStatement of Operator Competence - RequiredSupplier Verification & Plant Details

DANGER BEWARE OVERHEAD WIRESTracksSEAT BELTS

CABWARNING SIGNS (In Cabin)HydraulicsHydraulicsWARNING DEVICESHSE Use Only

09 SECL.INSP 0009 Grader CheckMobile PlantGRADERStatement of Operator Competence - RequiredSupplier Verification & Plant Details

SteeringSAFE WORK LIMIT ON BATTERSRatio 2 to 1 Ratio 2 to 1

CABHydraulicsSEAT BELTS


10 SECL.INSP 0010 Front End Loader CheckMobile Plant FRONT END LOADERSupplier Verification & Plant Details

HydraulicsCABDANGER BEWARE OVERHEAD WIRESSEAT BELTS


11 SECL.INSP 0011 Mobile Crane CheckedMobile PlantMOBILE CRANEStatement of Operator Competence - RequiredSupplier Verification & Plant Details

HydraulicsBoomCABDANGER BEWARE OVERHEAD WIRES,SEAT BELTS


12 SECL.INSP 0012 MultiWheel Roller Check()Mobile PlantMULTI-WHEEL ROLLERStatement of Operator Competence - RequiredSupplier Verification & Plant Details

SEAT BELTSWARNING SIGNS (In Cabin)WARNING DEVICESCABHSE Use Only

13 SECL.INSP 0013 Pad Foot Roller Check()Mobile PlantROLLER Smooth or Pad FootStatement of Operator Competence RequiredSupplier Verification & Plant Details

HydraulicsRatio 4/1SEAT BELTS

WARNING SIGNS (In Cabin)CABWARNING DEVICESHSE Use Only

14 SECL.INSP 0014 Scraper Check()Mobile PlantSCRAPER Twin EngineStatement of Operator Competence RequiredSupplier Verification & Plant Details

SEAT BELTSWARNING SIGNS (In Cabin)HydraulicsWARNING DEVICESCABHSE Use Only

15 SECL.INSP 0015 One Engine Scraper Check()Mobile PlantSCRAPERStatement of Operator Competence RequiredSupplier Verification & Plant Details

SEAT BELTSHydraulicsWARNING SIGNS (In Cabin)CABWARNING DEVICESHydraulicsHSE Use Only

16 SECL.INSP 0016 Skid Steer Loader()Mobile PlantSKID STEER LOADERStatement of Operator Competence RequiredSupplier Verification & Plant Details

CABHydraulicsHydraulicsWARNING DEVICESDANGER BEWARE OVERHEAD WIRESSEAT BELTS MUST BE WORN

WARNING SIGNS (In Cabin)HSE Use Only

17 SECL.INSP 0017 Tracked Loader Check()Mobile PlantTRACK LOADERStatement of Operator Competence RequiredSupplier Verification & Plant Details

TracksHydraulicsTracksCABDANGER BEWARE OVERHEAD WIRESSEAT BELTS


18 SECL.INSP 0018 TruckTrailer ()Mobile PlantTRUCK and TRAILER Articulated VehicleSupplier Verification & Plant Details

Towing HitchKEEP CLEARSEAT BELTS

WARNING SIGNS (In Cabin)Steering TyresWARNING DEVICESCABINAir / HydraulicsHSE Use Only

heavy equipment inspection checklist

Documents