heati mii distii crshidk.vwr-cmd.com/ex/downloads/newsletter/dk/201101_vwr...topolino ikamag ® mini...

VWRProduct Overview

HEA

TIN

G

DIS

TILL

ING

CRU

SHIN

G MIX

ING

MIX

ING

Integrated safety

www.ika.com

DIN EN IEC 61010-1DIN EN IEC 61010-2-010DIN EN IEC 61010-2-051DIN EN IEC 61326-1

experience safety first hand with the rCt basic from IKa®

RH basic 2 IKAMAG® C-MAG HS 7 IKAMAG® *

* Available in 4“, 7“ and 10“

RCT basic safety control IKAMAG® * Incl. temperature sensor and protection cover

* Here shown with ETS-D5, H 44, H 38, H 16 V

RH basic 2IKAMAG®

C-MAG HS 7IKAMAG®

RCT basic safety control IKAMAG®

Technical data

Stirring quantity 10 l 10 l 20 l

Motor rating input / output 15 / 2 W 15 / 1,5 W 16 / 9 W

Speed display scale (0 - 6) scale (0 - 6) digital

Speed range 100 – 2.000 rpm 100 – 1.500 rpm 50 – 1.500 rpm

Heating function

Heating output 400 W 1.000 W 600 W

Temperature range RT – 320 °C 50 – 500 °C RT – 310 °C

Setting accuracy ± 10 K ± 10 K ± 1 K

Safety circuit 400 °C (fixed) 550 °C (fixed) 50 – 360 °C

Control accuracy with sensor — ETS-D5 ± 0,5 K PT 1000 ± 1 K / ETS-D5 ± 0,5 K

Heating plate

Material stainless steel (AISI 304) glass ceramic alluminum alloy

Dimensions Ø 125 mm 180 x 180 mm Ø 135 mm

General Data

Dimensions (W x D x H) 168 x 220 x 105 mm 220 x 330 x 105 mm 160 x 270 x 85 mm

Weight 2,4 kg 5 kg 2,5 kg

Protection class acc. to DIN EN 60529 IP 21 IP 21 IP 21

Interface — — —

IKA® Ident. No. Single Unit / Package: 3339000 3581200 / 9015900 3810000

VWR Ident. No. Single Unit / Package: 442-0174 442-0742 / 442-0682 442-0603

IKa® Mixing Magnetic stirrers with heating 4

SALES PITCH Integrated temperature control Two independent control circuitsExact temperature and speed setting via digital speed display Hot surface warning Adjustable safety circuitWide range of accessories for flexible use UL, DIN and CE tested and certified

SALES PITCHExcellent chemical resistanceFixed safety circuit Hot surface warningDigital error code displayElevated control panel to protect against leaking liquids High surface temperature up to 500 °C

Shown accessories are not included in delivery

RET basic safety control IKAMAG®

RET control/tsafety control IKAMAG®

20 l 20 l

16 / 9 W 12 / 5

digital digital

50 - 1.700 rpm 0 - 1.200 rpm

600 W 600 W

RT – 340 °C RT – 340 °C

± 1 K 0,5 K (< 100°C) 1K (> 100°C)

50 – 360 °C 50 – 350 °C

PT 1000 ± 1 K / ETS-D5 ± 0,5 K +- 0,2 K

stainless steel (AISI 304) stainless steel (AISI 304)

Ø 135 mm Ø 135 mm

160 x 270 x 95 mm 160 x 280 x 97 mm

2,5 kg 2,8 kg

IP 42 IP 42

— RS 232

3622000 3964000

442-2378 IKAA3964000

RCT Synthesis Package 1 RCT Synthesis Package 2

Package consists of Package consists of

- RCT basic safety control IKAMAG® - RCT basic safety control IKAMAG®

- H 16 V Support rod - H 16 V Support rod

- H 44 Boss head clamp - H 44 Boss head clamp

- H 38 Holding rod - H 38 Holding rod

- H 135.3 Carrier plate - H 135.5 Reaction block 500 ml round flask

- H 135.310, H 135.311, H 135.312, H 135.313 Quarter

- H 135.511 Insert, 250 ml round flask

- H 16.1 Extension for support rod

- H 135.3 Carrier plate

IKA® Ident. No. 8025100 IKA® Ident. No. 8025200

VWR Ident. No. 442-0679 VWR Ident. No. 442-0680

ETS- D5

IKA® Ident. No. 3378000

VWR Ident. No. 620-8108

075

IKa® MixingMagnetic stirrers with heating

RET basic safety control IKAMAG® Incl. temperature sensor and protection cover

RET control/t safety control IKAMAG® RCT Synthesis Package 1 RCT Synthesis Package 2

SALES PITCH Perfect temperature control within the mediumAdjustable safety temperatureRange of operation modes according to your applicationsDifferent accessories for comfortable working

IKa® Mixing Multi-position magnetic stirrers with heating 6

RT 5 powerIKAMAG®

RT 10 powerIKAMAG®

RT 15 powerIKAMAG®

Technical data

Stirring positions 5 10 15

Max. stirring quantity per stirring position (H2O) 0,4 l 0,4 l 0,4 l

Distance between stirring places 90 mm 90 mm 90 mm

Motor rating input / output 7,2 / 1,8 W 14,4 / 3,6 W 21,6 / 5,4 W

Speed display scale (1 – 10) scale (1 – 10) scale (1 – 10)

Speed range 0 – 1.100 rpm 0 – 1.100 rpm 0 – 1.100 rpm

Deviation for individual stirring positions 5 % 5 % 5 %

Heating function

Heating output 175 W 375 W 580 W

Temperature range (surface) RT – 120 °C RT – 120 °C RT – 120 °C

Heat control scale (1 – 10) scale (1 – 10) scale (1 – 10)

Temperature consistancy in the medium ± 2 K ± 2 K ± 2 K

Set-up plate

Material silicone silicone silicone

Dimensions 120 x 450 mm 180 x 450 mm 270 x 450 mm

General Data


Weight 3 kg 4,2 kg 6 kg


IKA® Ident. No.: 2930300 2930500 2930700

VWR Ident. No.: 442-0001 442-0002 442-0003

RT 5 power IKAMAG® RT 10 power IKAMAG® RT 15 power IKAMAG®

SALES PITCHStirring up to 15 flasks at onceTime efficientOptimizes use of laboratory space Easy to useConsistent sample conditionsPrecise temperature distribution

077

IKa® MixingMulti-position magnetic stirrers without heating

RO 5 powerIKAMAG®

RO 10 powerIKAMAG®

RO 15 powerIKAMAG®

5 10 15

0,4 l 0,4 l 0,4 l

90 mm 90 mm 90 mm

7,2 / 1,8 W 14,4 / 3,6 W 21,6 / 5,4 W

scale (1 – 10) scale (1 – 10) scale (1 – 10)

0 – 1.100 rpm 0 – 1.100 rpm 0 – 1.100 rpm

5 % 5 % 5 %

– – –

– – –

– – –

– – –

stainless steel (AISI 304) stainless steel (AISI 304) stainless steel (AISI 304)

120 x 450 mm 180 x 450 mm 270 x 450 mm

122 x 552 x 65 mm 182 x 552 x 65 mm 272 x 552 x 65 mm

2,3 kg 3,2 kg 4,7 kg

IP 42 IP 42 IP 42

2930200 2930400 2930600

442-0011 442-0012 442-0013

RO 5 power IKAMAG®

Incl. removable PUR cover RO15 power IKAMAG®

Incl. removable PUR cover RO 15 power IKAMAG®

Incl. removable PUR cover

SALES PITCH Simultaneous operation Easy cleaning

APPLICATION FIELDSWaste water analytics Preparation of dissolutions material testing

IKa® Mixing Magnetic Stirrers without heating 8

topolinoIKAMAG®

Mini MR standardIKAMAG®

lab disc IKAMAG®

color squidIKAMAG®

big squid IKAMAG®

Technical data

Stirring quantity 0,25 l 1 l 800 ml 1 l 1,5 l

Motor rating input / output 1 / 0,8 W 3 / 2 W 5 / 3 W 3 / 2 W 3 / 2 W

Speed display – – – digital digital

Speed range 300 – 1.800 rpm 0 – 2.500 rpm 15 – 1.500 rpm 0 – 2.500 rpm 0 – 2.500 rpm

Reversion of rotation direction (switchable) – – every 30 s – –

Max. magnetic bar (L x Ø) – – – – –

Set-up plate

Material PP polyester polyester glass glass

Dimensions Ø 80 mm 115 x 115 mm Ø 100 mm Ø 115 mm Ø 160 mm

General Data

Dimensions (W x D x H) 95 x 115 x 37 114 x 127 x 37 mm 117 x 180 x 12 mm 145 x 160 x 45 mm 180 x 195 x 40 mm

Weight 0,32 0,25 kg 0,3 kg 0,54 kg 0,7 kg

Protection class acc. to DIN EN 60529 IP 21 IP 42 IP 65 IP 54 IP 54

IKA® Ident. No.: 3368000 3674000 3907500 3671000 3672000

VWR Ident. No.: 442-0601 442-0735 442-0737 442-0696 442-0701

topolino IKAMAG®

Mini MR standard IKAMAG®

lab disc IKAMAG®

color squid IKAMAG®

big squid IKAMAG®

SALES PITCHDigital speed displayWide speed rangeOutstanding chemical resistanceRecyclable materialsIdeal white surface for titrations

079

IKa® MixingMagnetic Stirrers without heating

KMO 2 basicIKAMAG®

C-MAG MS 10 IKAMAG®

Midi MR 1 digitalIKAMAG®

Maxi MR 1 digital IKAMAG®

5 l 15 l 50 l 150 l

14 / 4 W 15 / 1,5 W 70 / 19 W 80 / 35 W

scale scale digital digital

0 – 1.100 rpm 100 – 1.500 rpm 0 – 1.000 rpm 0 – 600 rpm

– – – –

50 x 8 mm 80 x 10 mm 80 x 10 mm 155 x 27 mm

stainless steel (AISI 304) glass ceramic stainless steel (AISI 304) stainless steel (AISI 304)

140 x 120 mm 260 x 260 mm 350 x 350 mm 500 x 500 mm

140 x 200 x 75 mm 300 x 415 x 105 mm 360 x 430 x 110 mm 505 x 585 x 110 mm

1,4 kg 6 kg 9 kg 16 kg

IP 21 IP 21 IP 21 IP 21

2812000 3582600 2621900 2621800

442-2109 442-0723 442-2150 442-2160

KMO 2 basic IKAMAG®

C-MAG MS 10 IKAMAG®


Midi MR 1 digital IKAMAG®

Maxi MR 1 digital IKAMAG®

SALES PITCHSturdy stainless steel casingDigital displayTimer functionHigh stirring amountsVariable speedPowerful magnetic field for stirring Tasks up to 50 liters (water)

IKa® Mixing Electronic Overhead stirrers10

EUROSTAR digital EUROSTAR powercontrol- visc

EUROSTAR powercontrol- visc P1



Technical data

Stirring quantity (H2O) 20 l 40 l 60 l 40 l 40 l

Max. viscosity 10.000 mPas 50.000 mPas 70.000 mPas 100.000 mPas 150.000 mPas

Motor rating input / output 75 / 55 W 130 / 110 W 153 / 134 W 130 / 110 W 130 / 110 W

Output at stirring shaft 53 W 105 W 126 W 95 W 95 W

Max. ON time 100 % 100 % 100 % 100 % 100 %

Max. torque at chuck 30 Ncm 60 Ncm 100 Ncm 200 Ncm 380 Ncm

Speed range 50 – 2.000 rpm 50 – 2.000 rpm 50 – 1.200 rpm 14 – 530 rpm 8 – 290 rpm

Speed display digital digital digital digital digital

Chuck range 0,5 – 10 mm 0,5 – 10 mm 0,5 – 10 mm 0,5 – 10 mm 0,5 – 10 mm

Diameter / length of extension arm 13 / 160 mm 16 / 200 mm 16 / 200 mm 16 / 200 mm 16 / 200 mm

General data

Dimensions (W x D x H) 80 x 190 x 222 mm 80 x 190 x 253 mm 80 x 190 x 253 mm 80 x 190 x 330 mm 80 x 190 x 330 mm

Weight 2,8 kg 3,8 kg 4 kg 4,9 kg 4,9 kg

Protection class acc. to DIN EN 60529 IP 42 IP 42 IP 42 IP 42 IP 42

Interface — RS 232 / analog RS 232 / analog RS 232 / analog RS 232 / analog

Torque measurement — trend trend trend trend

IKA® Ident. No.: 2482000 2600000 3330000 2850000 2850700

VWR Ident. No.: 441-2420 442-2344 441-2984 441-2434 441-2435

EUROSTAR digital EUROSTAR power control-visc

EUROSTAR power control-visc P1

EUROSTAR power control-visc P4/P7

SALES PITCHDigital DisplayIntegrated torque trend displayRS 232 interfaceWide range of stirring elementsPush through agitator shafts

Futher units available. Please see www.ika.com.

RW 20 digital RW 28 basic RW 47 D

Technical data

Stirring quantity (H2O) 20 l 80 l 200 l

Max. viscosity 10.000 mPas 50.000 mPas 100.000 mPas

Motor rating input / output 70 / 35 W 220 / 90 W 513 / 370 W

Output at stirring shaft 26 W 90 W 300 W

Max. ON time 100 % 100 % 100 %

Max. torque at chuck (per 100 rpm) 150 Ncm 900 Ncm 3.000 Ncm

Speed range l (per 50 Hz) 60 – 500 rpm 60 – 400 rpm 57 – 275 rpm

Speed range ll (per 50 Hz) 240 – 2.000 rpm 240 – 1.400 rpm 275 – 1.300 rpm

Speed display digital scale scale

Chuck range 0,5 – 10 mm 1 – 10 mm 3 – 16 mm

Diameter / length of extension arm 13 mm / 160 mm 16 mm / 145 mm –

General Data


Weight 3,1 kg 7,4 kg 15 kg


IKA® Ident. No. Single Unit / Package: 3593000 2760000 / 9019400 1602000 / 9019500

VWR Ident. No. Single Unit / Package: 441-2907 441-2332 / IKAA9019400 441-2350 / IKAA9019500

0711

IKa® MixingMechanical Overhead stirrers

RW 20 digital*

* Here shown with R 1342, RH 3, R 1826, R 182

RW 28 basic RW 47 D*

* Here shown with R 2302, R 474

SALES PITCHConvenient for high viscosity or intensive mixingPowerfulEasy to useWide range of stirring elementsTwo selectable speed ranges

Futher units available. Please see www.ika.com.


IKa® Mixing Horizontal Shakers 12

HS 260 basic HS 260 control HS 501 digital

Technical data

Shaking movement reciprocating reciprocating reciprocating

Orbital diameter 20 mm 20 mm 30 mm

Max. shaking weight (incl. attachment) 7.5 kg 7.5 kg 15 kg

Motor rating input / output 45 / 10 W 45 / 10 W 70 / 19 W

Permissible ON time 100 % 100 % 100 %

Speed range 20 – 300 rpm 10 - 300 rpm 0 – 300 rpm

Speed display LED line digital digital

Timer ∞ / 5 – 50 min ∞ / 9 h 59 min ∞ / 1 – 56 min

General Data


Weight 8.5 kg 8.8 kg 26 kg

Permissible ambient temperature 5 – 50 °C 5 – 50 °C 5 – 50 °C


Interface — RS 232 / analog —

IKA® Ident. No.: 3066600 3066700 2527000

VWR Ident. No.: 444-2770 444-2771 444-2701

HS 260 basic*

* Here shown with AS 260.5 Separating funnel attachment

HS 260 control*

* Here shown with AS 260.1 Universal attachment

HS 501 digital*

* Here shown with HS 501.2 Seperating funnel attachment

SALES PITCHWide range of attachment for diverse applicationsDigital displayTimer functionRS 232 interfaceIntegrated end point positioning for automated robot-controlled sampling


0713

IKa® MixingOrbital Shakers

lab dancer VORTEX Genius 3 MS 3 basic MS 3 digital MTS 2/4 digital

orbital orbital orbital orbital orbital

4,5 mm 4 mm 4,5 mm 4,5 mm 3 mm

0,1 kg 0,4 kg 0,5 kg 0,5 kg 2 o. 4 microtiter plates

1,2 / 0,8 W 58 / 10 W 10 / 8 W 10 / 8 W 35 / 13,2 W

100 % 100 % 100 % 100 % 100 %

2.800 rpm 500 – 2.500 rpm 0 – 3.000 rpm 0 – 3.000 rpm 0 – 1.100 rpm

– scale (0 - 6) scale scale scale

– – – 1 s – 999 min ∞ / 1 – 99 min

Ø 100 x 70 mm 127 x 149 x 136 mm 148 x 205 x 63 mm 148 x 205 x 63 mm 185 x 320 x 105 mm

0,55 kg 4,5 kg 2,9 kg 2,9 kg 2,7 kg

5 – 40 °C 5 – 40 °C 5 – 40 °C 5 – 40 °C 5 – 40 °C

IP 40 IP 21 IP 21 IP 21 IP 21

– – – – –

3365000 3340000 3617000 3319000 3208000

444-0020 412-0098 444-2544 444-2541 444-0024

lab dancer VORTEX Genius 3*

* Here shown with VG 3.1 Standard attachment

MTS 2/4 digital

MS 3 basic*

* Here shown with MS 3.1 Standard attachment

MS 3 digital*

* Here shown with MS 3.4 Microtiter plate attachment

SALES PITCHWide range of basic attachments are includedContinuous or touch operationTimer with coutdown functionStable in all speed rangesWide speed range

Microtiter plates are not included in delivery

IKa® Mixing Orbital Shakers 14

VXR basic Vibrax® KS 130 basic KS 130 control

Technical data

Shaking movement orbital orbital orbital

Orbital diameter 4 mm 4 mm 4 mm

Max. shaking weight (incl. attachment) 2 kg 2 kg 2 kg

Motor rating input / output 35 / 13,2 W 45 / 10 W 45 / 10 W

Permissible ON time 100 % 100 % 100 %

Speed range 0 – 2.200 rpm 80 – 800 rpm 80 – 800 rpm

Speed display scale LED line digital

Timer – ∞ / 5 – 50 min ∞ / 0 – 9 h 59 min

General Data


Weight 6,1 kg 8.8 kg 9,8 kg

Permissible ambient temperature 5 – 40 °C 5 – 50 °C 5 – 50 °C


Interface – – RS 232 / analog

IKA® Ident. No. Single Unit / Package: 2819000 2980000 / 9019000 2980100 / 9019100

VWR Ident. No. Single Unit / Package: 444-0022 444-2760 / 444-0652 444-2761 / 444-0655

VXR basic Vibrax® KS 130 basic*

* Here shown with AS 130.3 Dish attachment

KS 130 control*

* Here shown with 130.2 Fixing clip attachment

SALES PITCHDigital displayTimer functionControllable and documentationable by labworldsoftWide range of attachmentsRS 232 interfaceIntegrated end point positioning for automated robot-controlled sampling


0715

IKa® MixingOrbital Shakers

KS 260 basic KS 260 control KS 501 digital

orbital orbital orbital

10 mm 10 mm 30 mm

7,5 kg 7,5 kg 15 kg

45 / 10 W 45 / 10 W 70 / 19 W

100 % 100 % 100 %

20 – 500 rpm 10 – 500 rpm 0 – 300 rpm

LED line digital digital

∞ / 5 – 50 min ∞ / 9 h 59 min ∞ / 1 – 56 min

360 x 420 x 98 mm 360 x 420 x 98 mm 505 x 585 x 120 mm

8,5 kg 8,8 kg 26 kg

5 – 50 °C 5 – 50 °C 5 – 50 °C

IP 21 IP 21 IP 21

– RS 232 / analog –

2980200 / 9019200 2980300 / 9019300 2526400

444-2772 / 444-0658 444-2773 / 444-0661 444-2700

KS 260 basic*

* Here shown with KS 260.2 Fixing clip attachment

KS 260 control KS 501 digital*

* Here shown with KS 501.1 Universal attachment

APPLICATION FIELDSSample preparation in water-/ waste water analytics Intensive mixing of liquids of different densities Extracting, elutriating (HS) Homogenous mixing through and intensitive gas exchange Biochemistry, mikrobiology, bakteriology, virology Multiplication of aerobic organism Sero- Diagnostics, e.g. for allergens Shakers for single samples or series


IKa® Mixing Incubator Shakers16

KS 4000 i control / KS 4000 ic control

New innovative incubator shaker with innovative design allowing unattended operation in a temperature-controlled environment.

- Large LED display for speed and time settings

- Controls with antimicrobial coating for reduction of bacteria

- Integrated PID temperature control (use of two PT 1000 temperature sensors)

- Junction box in the workspace for connection of an additional temperature

sensor e.g. PT 1000.60

- Electronic temperature and speed control

- Electronic timer switch: 1 s – 999 h (set by the minute or by the hour)

- Optional built-in cooling coil for connection to an external cooling unit e.g. KV 600

- Unit switches off automatically if disturbed

- Unit stops automatically when hood is lifted

- Collecting tray with drain hose on rear of unit

- Simple operation

- All functions can be controlled and documented using the labworldsoft®

software

- Low vibration and low-noise operation

- Outstanding stability: Cast aluminium base plate

- Attachments not included – please order accessories as required

KS 4000 i controlKS 4000 ic control

Technical data

Shaking movement orbital

Orbital diameter 20 mm

Max. shaking weight (incl. attachment) 20 kg

Motor rating input / output 82 / 24 W

Power consumption (at 230 V) 1.120 W

Permissible ON time 100 %

Infinitely adjustable speed range 10 to 500 rpm

Speed, time and temperature display digital

Timer switch (select minutes / hours) ∞ / 1 s - 999 h

Heating function

Heat output 1.000 W

Temperature range RT + 5 °C to 80 °C

Temperature stability 0,1 K

(200 ml H2O at target T = 37 °C, RT 25°C)

Additional cooling function for KS 4000 ic control

Built-in cooling spiral yes

Temperature range at flow temperature (3 °C) KV 600 RT - 10 °C to 80 °C

Cooling connection for hose Ø 10 mm

Adapter nipple for hose connection yes

General data

Dimensions (W x D x H) 580 x 750 x 525 mm

Weight (KS 4000 i / KS 400 ic) 50 kg / 55 kg

Permissible ambient temperature 15 to 32 °C

Protection class acc. to DIN EN 60529 IP 30

Interface RS 232

KS 4000 i control

IKA® Ident. No.: 3510000

VWR Ident. No.: 444-0298

KS 4000 ic control



STICKMAX



SALES PITCHSelf-adhesiveSuitable for disinfectionHighly flexible because easy to cutPeel-away strength required: 5N/cm²

KS 4000 i control* Incubator shaker

STICKMAX

KS 4000 ic control* with built-in cooling coil for connection to an external cooling unit

* Here shown with AS 4000.2 Fixing clip attachment

0717

IKa® CrushingUniversal disposable disperser system

ULTRA-TURRAX® Tube drive Drive, incl. 1 x removal hook for removal the rotor-stator unit (DT-20), power supply

ULTRA-TURRAX® Workstation

Included with delivery:- 1 x ULTRA-TURRAX Tube Drive

- 2 x ST-20 Tube with stirring device

- 2 x DT-20 Tube with rotor-stator element

- 2 x BMT-20 G / S Tube for grinding with glass balls (G) or with

stainless steel balls (S)

- 1 x Removal hook for removal the rotor-stator unit

- 1 x Power supply

ULTRA-TURRAX® Tube Drive

Technical data

Rating input / output 20 / 17 W

Speed range, infinitely adjustable 300 – 6.000 rpm

Timer1 – 59 s (300 – 6.000 rpm)

1 – 29 min (300 – 4.000 rpm)

Display timer digital

General data

Dimensions (W x D x H) 100 x 160 x 40 mm

Weight 0,75 kg

Protection class acc. to DIN EN 60529 IP 20



ULTRA-TURRAX® Workstation



SALES PITCHWorld-wide patentedStirring, milling and dispersing with one driveReproducible resultsHermetically sealableNo cross-contaminationDisposable tubesWorkstation with different tubes availableDigital timerSterilized tubes with pierceable membrane available

ST-20 Tube with stirring device

ST-50 Tube with stirring device

DT-20 Tube with rotor-stator element

DT-50 Tube with rotor-stator element

BMT-20-S Tube for grinding with stainless steel balls

BMT-50-S Tube for grinding with stainless steel balls

BMT-20-G Tube for grinding with glass balls

BMT-50-G Tube for grinding with glass balls

ST-20 DT-20 BMT-20 S BMT-20 G

IKA® Ident. No.: 3703000 3703100 3703200 3703300

VWR Ident. No.: 431-2892 431-0135 531-0469 431-2893

ST-50 DT-50 BMT-50 S BMT-50 G

IKA® Ident. No.: 3699500 3699600 3699700 3699800

VWR Ident. No.: 531-0480 531-0481 531-0482 531-0483

Volume 50 ml (10 pcs.)

Volume 20 ml (25 pcs.)

All tubes are also available with a pierceable membrane and gamma-sterilized.

IKa® Crushing Disperser/ batch operation18

T 10 basic ULTRA-TURRAX®


T 25 digital ULTRA-TURRAX®


Technical data

Motor rating input / output 125 / 75 W 500 / 300 W 500 / 300 W 1.100 / 700 W

Volume range (H2O) 0,5 – 100 ml 1 – 1.500 ml 1 - 2.000 ml 0,25 – 30 l

Speed adjustment stepless stepless stepless stepless

Speed range 8.000 – 30.000 rpm 3.500 – 24.000 rpm 3.400 – 24.000 rpm 500 – 10.000 rpm

Speed display scale scale digital scale

Noise without dispersing element 65 dB (A) 73 dB (A) 73 dB (A) 72 dB (A)

Overload protection yes yes yes yes

General Data

Dimensions (W x D x H) 46 x 57 x 201 mm 65 x 80 x 240 mm 65 x 80 x 240 mm 125 x 120 x 367 mm

Weight 0,4 kg 1,6 kg 1,6 kg 6 kg

Permissible ambient temperature 5 – 40 °C 5 – 40 °C 5 – 40 °C 5 – 40 °C

Permissible relative humidity 80 % 80 % 80 % 80 %

Protection class acc. to DIN EN 60529 IP 30 IP 20 IP 20 IP 20

IKA® Ident. No. Single Unit / Package: 3420000 3561000 / 9018900 3565000 3783500

VWR Ident. No. Single Unit / Package: 431-0010 431-2601 / 431-0144 431-2881 431-2911

T 10 basic ULTRA-TURRAX® T 18 basic ULTRA-TURRAX® T 25 digital ULTRA-TURRAX® T 50 basic ULTRA-TURRAX®

SALES PITCHWide range of dispersing tools for several applicationsDisposable tools availableHigh shear force for perfect homogenizingDigital display

0719

IKa® CrushingMills

A 11 basic A 10 basic M 20 MF 10 basic

Technical Data

Motor rating input / output 160 / 100 W 180 / 80 W 620 / 260 W 1.000 / 500 W

Speed range fixed 28.000 rpm fixed 20.000 rpm fixed 20.000 rpm 3.000 – 6.500 rpm

Useful volume 80 ml 50 ml 250 ml max. 5 kg / h

Duty cycle ON / OFF 1 min / 10 min 5 min / 10 min 7 min / 10 min 120 min / 30 min

Overload protection yes yes current limitation yes

Circumferential speed 53 m/s 57 m/s 72 m/s MF 10.1: 22,5 m/s

MF 10.2: 31,4 m/s

Max. granularity of task 10 mm 6 mm 5 - 7 mm MF 10.1: 15 mm

MF 10.2: 10 mm

Material grinding chamber stainless steel (AISI 316L) stainless steel (AISI 1.4301) stainless steel (AISI 304) stainless steel (AISI 304)

General data

Dimensions (W x D x H) 85 x 85 x 240 mm 120 x 225 x 105 mm 170 x 170 x 350 mm 320 x 380 x 300 mm

Weight 1,5 kg 2,2 kg 6,6 kg 9,7 kg

Permissible ambient temperature 5 – 40 °C 5 – 40 °C 5 – 40 °C 5 – 40 °C

Permissible relative humidity 80 % 80 % 80 % 80 %

Protection class acc. to DIN EN 60529 IP 43 IP 21 IP 21 IP 22

IKA® Ident. No. 2900000 1603500 1603600 2836000

VWR Ident. No. 412-1111 IKAA1603500 412-1120 412-1130

A 11 basic A 10 basic M 20 MF 10 basic + MF 10.1 Cutting-grinding head

MF 10.2 Impact-grinding head

SALES PITCHRange of cutters and knifes for a variety of applicationsCoolable grinding chamberEasy to cleanExchangeable grinding chamber

IKa® Distilling Rotary evaporators20

RV 10 digital V / RV 10 digital V-C / RV 10 digital FLEX RV 10 control V / RV 10 control V-C / RV 10 control FLEX

Technical data

Cooling surface 1.200 cm2 1.200 cm2

Technical data

Motor rating input 50 W 50 W

Speed range 20 - 280 rpm 20 - 280 rpm

Setting of lower end stop 60 mm, contact-free 60 mm, contact-free

Vacuum controller Accessories Integrated

Heating bath HB 10 digital HB 10 control

Temperature range RT - 180 °C RT - 180 °C

Heating power 1.300 W 1.300 W

Controller Micro controller Micro controller

Temperature display digital digital

Setting accuracy 1 K 1 K

Control deviation ±1 K ±1 K

General Data

Dimensions ( W x D x H ), without glassware 530 x 410 x 570 mm 530 x 410 x 570 mm

Weight of evaporator incl. heating bath without glass part 21,5 kg 21,5 kg

Protection class acc. to DIN EN 60529 IP 20 IP 20

IKA® Ident. No.: 8022540 / 8023140 / 8031540 8022740 / 8023340 / 8031640

VWR Ident. No.: 531-0293 / 531-0287 / 531-0781 531-0291 / 531-0285 / 531-0784

RV 10 control FLEX*

* Here shown with RV 10.4 Dry ice condenser, evaporation and receiving flask

RV 10 digital V

SALES PITCHDigital water/oil bath with carrying handles & safety circuitMotorized lift with safety stopClockwise and counter-clockwise interval operationTimer function

+

0721

IKa® HeatingHeating plate / bath & Thermostat

C-MAG HP 7 IKATHERM® EH 4 basic HBR 4 digital HB 10 digital

Technical Data Technical Data

Heat output 1.000 W Heat output 1.500 W 1.000 W 1.350 W

Heating plate temperature range 50 - 500 °C Temperature range 25 – 100 °C RT – 200 °C RT – 180 °C

Safety circuit (fixed) 550 °C Setting tolerance – ± 1 K ± 1 K

Setting accuracy ± 10 K Deviation ( 3 I H2O, 90 °C ) – ± 1 K ± 1 K

Control accuracy with sensor ETS-D5 ± 0,5 Safety class yes (acc. to DIN 12876) 2 (acc. to DIN 12877) 2 (acc. to DIN 12877)

Temperature display digital Temperature display scale digital digital

Heating plate Stirring function

Material glass ceramic Stirring function – yes –

Dimensions 180 x 180 mm Speed range – 100 – 800 rpm –

General data General data

Dimensions (W x D x H) 220 x 330 x 105 mm Useful volume – 4 l 3 l

Weight 5 kg Weight 2,3 kg 4,4 kg 3,0 kg

Permissible ambient temperature 5 – 40 °C Permissible ambient temperature 5 – 40 °C 5 – 40 °C 5 – 40 °C

Permissible relative humidity 80 % Permissible relative humidity 80 % 80 % 80 %

Protection class acc. to DIN EN 60529 IP 21 Protection class acc. to DIN EN 60529 IP 31 IP 21 IP 21

IKA® Ident. No.: 3581800 IKA® Ident. No.: 3164000 2602300 3642000

VWR Ident. No.: 453-0087 VWR Ident. No.: 442-2393 462-2042 –

C-MAG HP 7 IKATHERM®*


EH 4 basic HBR 4 digital HB 10 digital

SALES PITCHIntegrated magnetic stirring driveDigital displayPrecise temperature controlAdjustable safety temperature

IKa® MixingStirring elements22

PROPELLER STIRRER, 4-BLADED - Standard

stirring element for drawing the material to be

mixed from the top to the bottom. Local shearing

forces, generates axial flow in the vessel. Used at

medium to high speeds.

PROPELLER STIRRER, 3-BLADED -

Flow-efficient design for drawing the material to

be mixed from the top to the bottom. Minimum

shearing forces. Used at medium to high speeds.

TURBINE STIRRER- For drawing the material to

be mixed from above. Generates axial flow in the

vessel. Minimum danger of injury when contact is

made with vessel. Minimum shearing forces. Used

at medium to high speeds.

DISSOLVER STIRRER - Radial flow, for drawing

the material to be mixed from the top to the

bottom. High turbulence, high shearing forces.

Particle reduction. Used at medium to high

speeds.

CENTRIFUGAL STIRRER- Two-bladed, blades

open with increasing speed. For stirring in round

vessels with narrow necks. Effect is similar to that

of a 4-bladed propeller stirrer. Medium to high

speeds required.

PADDLE STIRRER - Tangential flow, minimum

turbulence, good heat exchange, gentle

treatment of product. Used at low to medium

speeds.

ANCHOR STIRRER - Tangential flow, high

shearing rate at edges, minimum deposits on the

vessel wall. Used at low speeds. Polymer reac-

tions, even distribution of high mineral contents

in liquids. The ideal stirrer for medium to highly

viscous fluids.

IKA® Ident. No VWR Ident No.

PROPELLER STIRRER, 4-BLADED

R 1342 0741000 441-2901

R 1345 0741300 441-2903

R 2302 0739000 441-2904

PROPELLER STIRRER, 3-BLADED

R 1381 1296000 441-2911

R 1382 1295900 441-2912

R 1385 0477700 441-2913

R 1388 0477800 441-2914

R 1389 (PTFE-coated) 2343600 441-2125

TURBINE STIRRER

R 1311 2332900 441-2921

R 1312 2333000 441-2922

R 1313 2333100 441-2923

DISSOLVER STIRRER

R 1300 0513500 441-2951

R 1302 2387900 441-2953

R 1303 2746700 441-2954

CENTRIFUGAL STIRRER

R 1352 0756900 441-2961

R 1355 1132700 441-2962

PADDLE STIRRER

R 1375 0757700 441-2942

R 1376 0757800 441-2943

R 2311 0739500 441-2944

ANCHOR STIRRER

R 1330 2022300 441-2931

R 1331 2022400 441-2932

R 1333 2747400 441-2934

0723

IKa® MixingStirring elements

Stirrer - Ø Shaft - Ø Shaft lenght Max. Speed EUROSTARdigital

EUROSTAR power control-visc / P1

EUROSTARpower control-visc P4 / P7 RW 20 digital RW 28 basic RW 47 D

50 mm 8 mm 350 mm 2.000 rpm • • • •

100 mm 8 mm 540 mm 800 rpm • • • •

150 mm 13 mm 800 mm 600 rpm •

45 mm 8 mm 350 mm 2.000 rpm • • • •

55 mm 8 mm 350 mm 2.000 rpm • • • •

140 mm 10 mm 550 mm 800 rpm • • •

140 mm 10 mm 800 mm 400 rpm • • •

75 mm 8 mm 350 mm 800 rpm • • • •

30 mm 8 mm 350 mm 2.000 rpm • • • •

50 mm 8 mm 350 mm 2.000 rpm • • • •

70 mm 10 mm 400 mm 800 rpm • • •

80 mm 8 mm 350 mm 2.000 rpm • • • •

100 mm 10 mm 350 mm 1.000 rpm • • •

42 mm 8 mm 350 mm 2.000 rpm • • •

60 / 15 mm 8 mm 350 mm 2.000 rpm • • •

100 / 24 mm 8 mm 550 mm 800 rpm • • •

70 mm 8 mm 550 mm 800 rpm • • •

150 mm 10 mm 550 mm 800 rpm • • •

150 mm 13 mm 800 mm 600 rpm •

45 mm 8 mm 350 mm 1.000 rpm • • • •

90 mm 8 mm 350 mm 1.000 rpm • • •

150 mm 10 mm 550 mm 800 rpm • • •

IKa® Crushing Dispersing elements24

Dispersing element S 10 N - 5 G S 10 N - 8 G

Suitable for dispersing instrument T 10 basic T 10 basic

Working range 0,5 – 10 ml 1 – 50 ml

Stator diameter 5 mm 8 mm

Rotor diameter 3,8 mm 6,1 mm

Gap between rotor and stator 0,1 mm 0,25 mm

Min. / max. immersion depth 20 / 75 mm 20 / 95 mm

Shaft length 92 mm 115 mm

Materials in contact with medium PTFE, AISI 316L PTFE, AISI 316L

pH range 2 – 13 2 – 13

Suitable for solvents yes yes

Suitable for abrasive substances yes yes

Max. temperature 180 °C 180 °C

Sterilization methods all methods all methods

Ultimate fineness, suspensions 5 - 25 μm 5 - 25 μm

Ultimate fineness, emulsions 1 - 10 μm 1 - 10 μm

IKA® Ident. No.: 3304000 3305500

VWR Ident. No.: 442-0300 442-0310

Dispersing element S 18 N - 10 G* S 18 N - 19 G* S 25 N - 10 G S 25 N - 18 G S 25 N - 25 G

Suitable for dispersing instrument T 18 basic T 18 basic T 25 digital T 25 digital T 25 digital

Working range 1 – 100 ml 10 – 1.500 ml 1 – 100 ml 10 - 1.500 ml 50 – 2.000 ml

Stator diameter 10 mm 19 mm 10 mm 18 mm 25 mm

Rotor diameter 7,5 mm 12,7 mm 7,5 mm 12,7 mm 17 mm

Gap between rotor and stator 0,35 mm 0,4 mm 0,35 mm 0,3 mm 0,5 mm

Circumferential speed 9,4 m/s 15,9 m/s 9,4 m/s 15,9 m/s 21,4 m/s

Min. / max. immersion depth 25 / 70 mm 35 / 170 mm 22 / 85 mm 40 / 165 mm 40 / 165 mm

Shaft length 108 mm 204 mm 105 mm 194 mm 194 mm

Materials in contact with medium PTFE, AISI 316L PTFE, AISI 316L PTFE, AISI 316L PTFE, AISI 316L PTFE, AISI 316L

pH range 2 – 13 2 – 13 2 – 13 2 – 13 2 – 13

Suitable for solvents yes yes yes yes yes

Suitable for abrasive substances yes yes yes yes yes

Max. temperature 180 °C 180 °C 180 °C 180 °C 180 °C

Sterilization methods all methods all methods all methods all methods all methods

Ultimate fineness, suspensions 10 – 50 μm 10 – 50 μm 10 – 50 μm 10 – 50 μm 15 – 50 μm

Ultimate fineness, emulsions 1 – 10 μm 1 – 10 μm 1 – 10 μm 1 – 10 μm 1 – 10 μm

IKA® Ident. No.: L004639 L004640 0594000 0593400 1713300

VWR Ident. No.: 431-2602 431-2603 431-2452 431-2453 431-2456

Dispersing elements T 10 basic

Dispersing elements T 18 basic, T25 digital

S 10 N - 5 G For Use with T10 basic





* no photos

0725

IKa® CrushingDispersing elements & accessories

Dispersing element S 50 N - G 45 G S 50 N - G 45 M S 50 N - G 45 F

Suitable for dispersing instrument T 50 basic T 50 basic T 50 basic

Working range 0,5 – 20 l 0,5 – 15 l 0,25 – 10 l

Stator diameter 45 mm 45 mm 45 mm

Rotor diameter 36 mm 40,5 mm 40 mm

Circumferential speed 18,8 m/s 21,2 m/s 20,9 m/s

Min. / max. immersion depth 70 / 250 mm 70 / 250 mm 70 / 250 mm

Shaft length 300 mm 290 mm 290 mm

Material in contact with medium PTFE, AISI 316L PTFE, AISI 316L PTFE, AISI 316L

pH range 2 – 13 2 – 13 2 – 13

Suitable for solvents yes yes yes

Suitable for abrasive substances yes yes yes

Max. temperature 180 °C 180 °C 180 °C

Sterilization methods all methods all methods all methods

Ultimate fineness, suspensions 40 – 100 μm 25 – 50 μm 10 – 30 μm

Ultimate fineness, emulsions 10 – 30 μm 5 – 20 μm 1 – 10 μm

IKA® Ident. No.: 8003000 8003300 8003900

VWR Ident. No.: 431-2560 431-2563 431-2569

Dispersing elements T 50 basic

S 50 N - G 45 G For Use with T50 basic

S 50 N - G 45 M For Use with T50 basic

Stands

Stand R 1826 R 2722 R 2723

Diameter of support rod – 34 mm 34 mm

Dimensions (W x D) – 460 x 420mm 460 x 420mm

Height 800 mm 1.010 mm 620- 1.010 mm

Max Load – 10 kg 10 kg

Stroke – – 390 mm

IKA® Ident. No.: 3160100 1412000 1412100

VWR Ident. No.: 431-2901 431-9114 431-2912 R 1826 Plate stand

H 44 Boss head clamp

R 182 Boss head clamp



RH 3 Strap Clamp

R 2722 H- Stand

R 2723 Telescopic Stand

Boss head clamp H 44 R 182 R 270 R 271

Clamping range - stand 10 - 11 mm 6 - 16 mm 25 - 36 mm 34 mm

Clamping range- extension arm 11 mm 6 - 16 mm 5 - 21 mm 16 mm

Material cast aluminum cast aluminum cast aluminum cast aluminum

IKA® Ident. No.: 2437700 2657700 2657800 2664000

VWR Ident. No.: 442-2043 431-2923 431-0004 431-2907

Strap clamp RH 3

For stand diameter 8 - 16 mm

For vessel diameter 40 - 300 mm



S 50 N - G 45 F For Use with T50 basic

IKA® Mills

Sieves MF 10 basic Accessories for A 11 basic Accessories for A 10 basic Accessories for M 20

IKA® Ident No. VWR Ident No. IKA® Ident No. VWR Ident No. IKA® Ident No. VWR Ident No. IKA® Ident No. VWR Ident No.

MF 0.25 2938900 412-1137 A 11.2 2905200 412-1101 A 17 1462700 412-1171 M 22 0521800 412-1164

MF 0.5 2939000 412-1133

MF 1.0 2939200 412-1136

MF 2.0 2939400 412-1138

MF 3.0 2939500 412-1135

MF 4.0 2939600 –

Accessories for MS 3 basic/digital Accessories for Vortex Genius 3 Accessories for VXR

IKA® Ident No. VWR Ident No. IKA® Ident No. VWR Ident No. IKA® Ident No. VWR Ident No.

1. MS 3.1 3426300 442-2233 1. VG 3.1 3341200 444-2748 1. VX 2 0568900 444-2302

2. MS 3.3 3426600 442-2235 2. VG 3.2 3342300 412-0100 2. VX 7 0953300 –

3. MS 1.21 L001540 444-0013 3. VG 3.3 3342400 412-0101 3. VX 11 3627700 444-2747

IKA® Shakers

Universal Attachment Dish Attachment Fixing Clip Attachment Fixing Clips

IKA® Ident No. VWR Ident No. IKA® Ident No. VWR Ident No. IKA® Ident No. VWR Ident No. IKA® Ident No. VWR Ident No.

AS 130.1 8017300 444-2765 AS 130.3 3120000 444-2767 AS 130.2 3115000 444-2766 AS 2.1 1234300 444-2531

AS 260.1 8017400 444-2775 AS 260.3 3120600 444-2777 AS 260.2 3115500 444-2776 AS 2.2 1234400 444-2332

AS 501.1 8000200 444-2710 AS 501.5 2339600 444-2740 AS 501.4 2341100 444-2730 AS 2.3 1234500 444-2533

AS 4000.1 8022200 444-0494 AS 4000.3 3710000 444-0492 AS 4000.2 3710100 444-0493 AS 2.4 1234600 444-2534

AS 2.5 1234700 444-2535

AS 2.6 3819300 444-0674

IKa® accessoriesShakers, Mills

26 Please find more accessories on www.ika.com

Further cutters and beaters available. Please see www.ika.com.

1 1 3 1 33

2 2 2

IKA®-Werke GmbH & Co. KG

Contact person: Marina Weber

Janke & Kunkel-Str. 1079219 StaufenGermany

Tel. +49 7633 831-206Fax +49 7633 831-98

[email protected]

Subject for technical changes

ACCE

SSO

RIES

SOFT

WA

RE

2011

01_V

WR_

Prod

uct_

Ove

rvie

w_E

N

heati mii distii crshidk.vwr-cmd.com/ex/downloads/newsletter/dk/201101_vwr...topolino ikamag ® mini...

Documents