heated display cases & snacky - ideal ake · design of the glass: angular (squared) or slant...

HEATED DISPLAY CASES & SNACKY Product Specifications 2014 / 2015

PRODUCT SPECIFICATION TEXTS

All rights reserved. Version 07/2015 2

Models of Heated Display Cases Page

BASIC 44-45 3

BASIC 44-53 4

BASIC 78-45 5

BASIC 78-53 6

BASIC 112-45 7

BASIC 112-53 8

BASIC 146-45 9

BASIC 146-53 10

BASIC Mini 11

BASIC Plus 44-45 12

BASIC Plus 44-53 13

BASIC Plus 78-45 14

BASIC Plus 78-53 15

BASIC Plus 112-45 16




COMFORT 78-45 20

COMFORT 78-53 21

COMFORT 78-70 22

COMFORT 112-45 23

COMFORT 112-53 24

COMFORT 112-70 25

COMFORT 146-45 26

COMFORT 146-53 27

SNACKY WK UB 28

SNACKY WK 29

INDEX



Heated display case BASIC 44-45

Multifunctional heated and display case with 5 operating modes.The appliance has 3 climate settings: „moist heat“, „dry heat“ and „warm moisture“. It can also be operated in cold mode (with crushed-ice) and neutral (with LED lighting)! Guaranteed quality of your individual products! When the food is> 65 °C it is stable when the room temperature is > 20 °C .It is possible to use GN pans and accessories from depths of 10 mm to 150 mm.Heated display case with climate control: Supporting heat from medium-wave infrared heaters, primary hotplate and separate heating system for interior humidification including user friendly pictogram control panel. Simple One-Touch-Button-Control.

DESIGN■■ Insulation: High temperature insulation (Isulfrax up to 1200 °C) with low thermal conductivity throughout the entire appliance.

■■ All visible interior and exterior surfaces are polished. Surrounding GN support frame, all glass of ESG. Retractable front glass (Easy-Change) – interchangeable for either self service or assisted service. Change single handedly without the need for special tools, use as a cough and sneeze guard.

■■ Protected LED lighting with natural warm colour rendition.

■■ Interior suitable for GN 1/1. Usable depth of up to GN 100 mm or alternatively up to 150 mm deep with the use of a support frame. Different presentation possibilities for goods, using various GN pans and decor variations.

■■ Direct access to all electonic components.

■■ Finely tune of the humidity using the sliders within the frame structure.

■■ Simple replacement of the primary hotplate, supporting heat from compact infrared heaters; hygienic cleaning due to foldable hotplate and liftable front glass and top glass; service door on operator side for access to the water heater (inspection door); removable water tray for cleaning in a dishwasher; all CNS parts can be removed and are suitable for cleaning in the dishwasher.

BASIC EQUIPMENT■■ GN-suspension frame with holes for 100 mm GN; dividers for GN 2/4, with humidity distribution slider; air deflector on the customer

side that can also be used to hold serving utensils.

■■ Operating side: one-way mirrored hinged door (removable) – frameless construction, for the optical enlargement of the food on show and visually multiply the sales area; Slide-in model and PRO with Poly-Hygiene cutting board (depth 200 mm) which fits into the fat drip tray, both of which are removable for easy cleaning. Underneath integrated folding mirror to visually multiply the goods on display.

■■ Customer side: Front glass made of ESG for full transparency of goods on offer – liftable for easy cleaning. The glass position can be changed single handedly without the need for tools and can be used as a cough and sneeze guard.

■■ Supporting heat: mediumwave infrared heater, individually positioned over the GN field.

■■ Control/Operation: 3 climates in one sincle device, including pictogram control for primary heat, supporting heat and humidity. The pictogram control panel displays user friendly symbols and consists of one button for each function with 3 levels of operation. Automatic error analysis illustrated on the display panel – very service friendly. Visual and acoustic warning when the water needs refilling – easy refill without the need to remove the goods on display (Easy-Filling). Select from pre-set programmes 1 to 7 forevery-day use or simply customise a new programme.

EXTRASWaterdrain for well (including stop valve – mounted).System substructure for Slide-in- and PRO-Version (= hollow frame with adjustable feet and hinged door made of CNS; storage space for accessories and slide-in for the removable hinged door).

MODELSGlass height: 450 mm → Operators can serve guests directly by reaching over the top of the unit. Design of the glass: angular (squared) or slant with Easy-Change-System.Mounting options: Drop-in for mounting in the counter = without system substructure, cutting board and folding mirror. Slide-in for insertion on the operating side of counters or version PRO for use as a freestanding appliance respectively with casters for use as a mobile unit.

BASIC E-44-45 Slide-inBASIC S-44-45 Slide-in445 x 780/917** x 450*/750 mm1,62 kW230 V / 50 Hz

BASIC E-44-45 Drop-inBASIC S-44-45 Drop-in445 x 695 x 450*/750 mm1,62 kW230 V / 50 Hz

BASIC E-44-45 PROBASIC S-44-45 PRO445 x 805/917** x 450*/750 mm1,62 kW230 V / 50 Hz

Dimensions (WxDxH):Power consumption: Voltage:

*) Height of glass construction **) with cutting board







Dimensions (WxDxH):Power consumption:Voltage:









BASIC EQUIPMENT■■ GN-suspension frame with holes for 100 mm GN; dividers for GN 2/4, with humidity distribution slider; air deflector on the customer

side that can also be used to hold serving utensils.

■■ Operating side: one-way mirrored hinged door (removable) – frameless construction, for the optical enlargement of the food on show and visually multiply the sales area; Slide-in model and PRO with Poly-Hygiene cutting board (depth 200 mm) which fits into the fat drip tray, both of which are removable for easy cleaning. Underneath integrated folding mirror to visually multiply the goods on display.




EXTRASWaterdrain for well (including stop valve – mounted).System substructure for Slide-in- and PRO-Version (= hollow frame with adjustable feet and hinged door made of CNS; storage space for accessories and slide-in for the removable hinged door).

MODELSGlass height: 530 mm → Operators cannot serve guests directly by reaching over the top of the unit. Design of the glass: angular (squared) or slant with Easy-Change-System.Mounting options: Drop-in for mounting in the counter = without system substructure, cutting board and folding mirror. Slide-in for insertion on the operating side of counters or version PRO for use as a freestanding appliance respectively with casters for use as a mobile unit.
















■■ Finely tune of the humidity for each GN field using the sliders within the frame structure.


BASIC EQUIPMENT■■ GN-suspension frame with holes for 100 mm GN; dividers for GN 2/4, with humidity distribution sliders; air deflector on the custo-

mer side that can also be used to hold serving utensils.

■■ Operating side: one-way mirrored hinged doors (removable) – frameless construction, for the optical enlargement of the food on show and visually multiply the sales area; Slide-in model and PRO with Poly-Hygiene cutting board (depth 200 mm) which fits into the fat drip tray, both of which are removable for easy cleaning. Underneath integrated folding mirror to visually multiply the goods on display.


■■ Supporting heat: mediumwave infrared heaters, individually positioned over the GN fields.


EXTRASDisplay area → adjustable electronically to a depth of GN 100 mmWaterdrain for well (including stop valve – mounted).System substructure for Slide-in- and PRO-Version (= hollow frame with adjustable feet and hinged doors made of CNS; storage space for accessories and slide-in for the removable hinged doors).

























MODELSGlass height: 530 mm → Operators cannot serve guests directly by reaching over the top of the unit.Design of the glass: angular (squared) or slant with Easy-Change-System.Mounting options: Drop-in for mounting in the counter = without system substructure, cutting board and folding mirror. Slide-in for insertion on the operating side of counters or version PRO for use as a freestanding appliance respectively with casters for use as a mobile unit.



Heated display case BASIC Mini

Multifunctional counter top heated display case for food presentation. The appliance has 3 climate settings: „moist heat“, „dry heat“ and „warm moisture“. Guaranteed quality of your individual products! When the food is > 65 °C it is stable when the room temperature is > 20 °C . For flat presentation area or with a supporting frame for assembly with 20 mm high GN-pans.Heated display case with climate control, infrared supporting heat, primary hotplate and separate heating system for interior humidification including user friendly pictogram control panel. Simple One-Touch-Button-Control.

DESIGN■■ Insulation: heat resistant insulation throughout the entire appliance.

■■ Made entirely of stainless steel. All visible interior and exterior surfaces are polished. Surrounding GN support frame, all glass of ESG, retractable front glass (Easy-Change) – interchangeable for either self service or assisted service. Change single handedly without the need for tools, use as a cough and sneeze guard.


■■ Interior suitable for GN 1/1. Usable depth of up to GN 20 mm with the use of a supporting frame. Different presentation possi-bilities for food, using various GN pans and decor variations.



■■ Simple replacement of the primary hotplate, supporting heat from the compact infrared heater; hygienic easy cleaning due to foldable hotplate and liftable front glass and top glass. Removable water tray for cleaning in a dishwasher; all CNS-parts can be removed and are suitable for cleaning in the dishwasher.

BASIC EQUIPMENT■■ GN support frame with holes for 20 mm GN; including water refilling container.

■■ Operating side: mirrored hinged doors (removable) for the optical enlargement of the food on show and visually multiply the sales area; with Poly-Hygiene cutting board (depth 200 mm) which fits into the fat drip tray, both of which are removable for easy cleaning.

■■ Customer side: Front glass made of ESG with full transparency of goods on offer – can be lifted up for easy cleaning. The glass position can be changed single handedly without the need for tools, and can be used as a cough and sneeze guard.

■■ Control/Operation: 3 climates in one single device, including pictogram control system for primary heat, supporting heat and humidity. The control panel displays user friendly symbols and consists of one button for each function with 3 levels of operation. Automatic error analysis illustrated on the display panel – very service friendly. Visual and acoustic warning when the water needs refilling – easy refill without the need to remove the goods on display (Easy-Filling). Select from pre-set programmes 1 to 7 for everyday use or simply customise a new programme.

MODELSGlass height: 400 mm → Operators can serve guests directly by reaching over the top of the unit. Design of the glass: angular (square) with Easy-Change-SystemMounting: Counter top

BASIC MiniDimensions (WxDxH): 410 x 845 x 400*/530 mmPower consumption: 1,55 kWVoltage: 230 V / 50 Hz

*) Height of glass construction



Heated display case BASIC Plus 44-45

Dimensions (WxDxH): 445 x 695/917** x 450*/1350 mmPower consumption: 1,66 KWVoltage: 230 V / 50 Hz

BASIC Plus E-44-45 Slide-inBASIC Plus S-44-45 Slide-inBASIC Plus E-44-45 PROBASIC Plus S-44-45 PRO


Multifunctional heated and display case with 5 operating modes.The appliance has 3 climate settings: „moist heat“, „dry heat“ and „warm moisture“. It can also be operated in cold mode (with crushed-ice) and neutral (with LED lighting)! Guaranteed quality of your individual products! When the food is > 65 °C it is stable when the room temperature is > 20 °C .It is possible to use GN pans and accessories from depths of 10 mm to 150 mm.Heated display case with climate control: Supporting heat from medium-wave infrared heaters, primary hotplate and separate heating system for interior humidification including user friendly pictogram control panel. Simple One-Touch-Button-Control. Substructure with a pump and tank system for automatic refilling of the water tray.








BASIC EQUIPMENT■■ System substructure (= hollow frame with adjustable feet and hinged door made of CNS) – storage space for the water tank.

GN-suspension frame with holes for 100 mm GN; dividers for GN 2/4, with humidity distribution slider; air deflector on the customer side that can also be used to hold serving utensils.

■■ Operating side: one-way mirrored hinged door (removable) – frameless construction, for the optical enlargement of the food on show and visually multiply the sales area; Slide-in model and PRO with Poly-Hygiene cutting board (depth 200 mm) which fits into the fat drip tray, both of which are removable for easy cleaning. Underneath integrated folding mirror to visually multiply the goods on display. Substructure with automatic tank and pump system.



■■ Control/Operation: 3 climates in one sincle device, including pictogram control for primary heat, supporting heat and humidity. The pictogram control panel displays user friendly symbols and consists of one button for each function with 3 levels of operation. Auto-matic error analysis illustrated on the display panel – very service friendly. Visual and acoustic warning when the water tank needs refilling. Select from pre-set programmes 1 to 7 foreveryday use or simply customise a new programme.

EXTRASFixed water connectionDescaling system for water treatmentWater drain for well (including stop valve – mounted)Castors (2 swivel und 2 locked) instead adjustable feet

MODELSGlass height: 450 mm → Operators can serve guests directly by reaching over the top of the unit. Design of the glass: angular (squared) or slant with Easy-Change-System.Mounting options: Slide-in for insertion on the operating side of counters or version PRO for use as a freestanding appliance respec-tively with casters for use as a mobile unit.















BASIC EQUIPMENT■■ System substructure (= hollow frame with adjustable feet and hinged door made of CNS) – storage space for the water tank.

GN-suspension frame with holes for 100 mm GN; dividers for GN 2/4, with humidity distribution slider; air deflector on the customer side that can also be used to hold serving utensils.

■■ Operating side: one-way mirrored hinged door (removable) – frameless construction, for the optical enlargement of the food on show and visually multiply the sales area; Slide-in model and PRO with Poly-Hygiene cutting board (depth 200 mm) which fits into the fat drip tray, both of which are removable for easy cleaning. Underneath integrated folding mirror to visually multiply the goods on display. Substructure with automatic tank and pump system.




EXTRASFixed water connectionDescaling system for water treatmentWater drain for well (including stop valve – mounted)Castors (2 swivel und 2 locked) instead adjustable feet

MODELSGlass height: 530 mm → Operators cannot serve guests directly by reaching over the top of the unit. Design of the glass – angular (squared) or slant with Easy-Change-System.Mounting options: Slide-in for insertion on the operating side of counters or version PRO for use as a freestanding appliance respec-tively with casters for use as a mobile unit.















BASIC EQUIPMENT■■ System substructure (= hollow frame with adjustable feet and hinged doors made of CNS) – storage space for the water tank, for

accessories and slide-in for the removable hinged doors; GN-suspension frame with holes for 100 mm GN; dividers for GN 2/4, with humidity distribution slider; air deflector on the customer side that can also be used to hold serving utensils.

■■ Operating side: one-way mirrored hinged doors (removable) – frameless construction, for the optical enlargement of the food on show and visually multiply the sales area; Slide-in model and PRO with Poly-Hygiene cutting board (depth 200 mm) which fits into the fat drip tray, both of which are removable for easy cleaning. Underneath integrated folding mirror to visually multiply the goods on display. Substructure with automatic tank and pump system.


■■ Supporting heat: mediumwave infrared heater, individually positioned over the GN fields.

■■ Control/Operation: 3 climates in one sincle device, including pictogram control for primary heat, supporting heat and humidity. The pictogram control panel displays user friendly symbols and consists of one button for each function with 3 levels of operation. Automatic error analysis illustrated on the display panel – very service friendly. Visual and acoustic warning when the water needs refilling. Select from pre-set programmes 1 to 7 foreveryday use or simply customise a new programme.

EXTRASDisplay area → adjustable electronically to a depth of GN 100 mm Fixed water connectionFixed water connectionDescaling system for water treatmentWater drain for well (including stop valve – mounted)Castors (2 swivel und 2 locked) instead adjustable feet

MODELSGlass height: 450 mm → Operators can serve guests directly by reaching over the top of the unit. Design of the glass – angular (squared) or slant with Easy-Change-System.Mounting options: Slide-in for insertion on the operating side of counters or version PRO for use as a freestanding appliance respec-tively with casters for use as a mobile unit.















BASIC EQUIPMENT■■ System substructure (= hollow frame with adjustable feet and hinged doors made of CNS) – storage space for the water tank, for

accessories and slide-in for the removable hinged doors; GN-suspension frame with holes for 100 mm GN; dividers for GN 2/4, with humidity distribution slider; air deflector on the customer side that can also be used to hold serving utensils.






MODELSGlass height: 530 mm → Operators cannot serve guests directly by reaching over the top of the unit. Design of the glass – angular (squared) or slant with Easy-Change-System.Mounting options: Slide-in for insertion on the operating side of counters or version PRO for use as a freestanding appliance respec-tively with casters for use as a mobile unit.




Dimensions (WxDxH): 1125 x 695/917** x 450*/1350 mmPower consumption: 3,04 kWVoltage: 230 V / 50 Hz











BASIC EQUIPMENT■■ System substructure (= hollow frame with adjustable feet and hinged doors made of CNS as well as a lateral inseration für GN pans)

– storage space for the water tank, for accessories and slide-in for the removable hinged doors; GN-suspension frame with holes for 100 mm GN; dividers for GN 2/4, with humidity distribution slider; air deflector on the customer side that can also be used to hold serving utensils.






















– storage space for the water tank, for accessories and slide-in for the removable hinged doors; GN-suspension frame with holes for 100 mm GN; dividers for GN 2/4, with humidity distribution slider; air deflector on the customer side that can also be used to hold serving utensils.






MODELSGlass height: 530 mm → Operators cannot serve guests directly by reaching over the top of the unit.Design of the glass – angular (squared) or slant with Easy-Change-System.Mounting options: Slide-in for insertion on the operating side of counters or version PRO for use as a freestanding appliance respec-tively with casters for use as a mobile unit.
















– storage space for the water tank, for accessories and slide-in for the removable hinged doors as well as a lateral inseration für GN pans; GN-suspension frame with holes for 100 mm GN; dividers for GN 2/4, with humidity distribution slider; air deflector on the customer side that can also be used to hold serving utensils.






















– storage space for the water tank, for accessories and slide-in for the removable hinged doors as well as a lateral inseration für GN pans; GN-suspension frame with holes for 100 mm GN; dividers for GN 2/4, with humidity distribution slider; air deflector on the customer side that can also be used to hold serving utensils.






MODELSGlass height: 530 mm → Operators cannot serve guests directly by reaching over the top of the unit.Design of the glass – angular (squared) or slant with Easy-Change-System.Mounting options: Slide-in for insertion on the operating side of counters or version PRO for use as a freestanding appliance respec-tively with casters for use as a mobile unit.



Heated display case COMFORT 78-45

COMFORT E-78-45 Slide-inCOMFORT S-78-45 Slide-in785 x 695/917** x 450*/1350 mm3,2 kW230 V / 50 Hz

COMFORT E-78-45 PROCOMFORT S-78-45 PRO775 x 695/917** x 450*/1350 mm3,2 kW230 V / 50 Hz



Multifunctional heated and display case with 5 operating modes.The appliance has 3 climate settings: „moist heat“, „dry heat“ and „warm moisture“. It can also be operated in cold mode (with crushed-ice) and neutral (with LED lighting)! Guaranteed quality of your individual products! When the food is > 65 °C it is stable when the room temperature is > 20 °C .It is possible to use GN pans and accessories from depths of 10 mm to 150 mm.Substructure with built in steam generator for permanent and constant humidification of the interior (Perfect Steam).Heated display case with climate control: Supporting heat from medium-wave infrared heaters, primary hotplate and separate heating system for interior humidification including user friendly pictogram control panel. Simple One-Touch-Button-Control. Substructure with a pump and tank system for automatic refilling of the water tray.








BASIC EQUIPMENT■■ Substructure (= hollow frame with adjustable feet and stainless steel hinged doors) with integrated steam generator and slide in

rails for the removable hinged doors and accessories. GN-suspension frame with holes for 100 mm GN; dividers for GN 2/4, with humidity distribution slider; air deflector on the customer side that can also be used to hold serving utensils. Including water tank and decalcification system for water treatment.

■■ Operating side: one-way mirrored hinged doors (removable) – frameless construction, for the optical enlargement of the food on show and visually multiply the sales area; Slide-in model and PRO with Poly-Hygiene cutting board (depth 200 mm) which fits into the fat drip tray, both of which are removable for easy cleaning. Underneath integrated folding mirror to visually multiply the goods on display. Substructure with steam generator.




EXTRASDisplay area → adjustable electronically to a depth of GN 100 mm Fixed water connectionFixed water connectionWater drain for well (including stop valve – mounted)Castors (2 swivel und 2 locked) instead adjustable feet
























MODELSGlass height: 530 mm → Operators cannot serve guests directly by reaching over the top of the unit. Design of the glass: angular (squared) or slant with Easy-Change-System.Mounting options: Slide-in for insertion on the operating side of counters or version PRO for use as a freestanding appliance respec-tively with casters for use as a mobile unit.













■■ With additional display area (black glass board) for a variety of goods with a high turnover.







■■ Customer side: Front glass made of ESG for full transparency of goods on offer – liftable for easy cleaning. The glass position can be changed single handedly without the need for tools and can be used as a cough and sneeze guard. For closed operation only.




MODELSGlass height: 700 mm → Operators cannot serve guests directly by reaching over the top of the unit. Design of the glass: angular (squared)Mounting options: Slide-in for insertion on the operating side of counters or version PRO for use as a freestanding appliance respec-tively with casters for use as a mobile unit.
















BASIC EQUIPMENT■■ Substructure (= hollow frame with adjustable feet and stainless steel hinged doors as well as a lateral inseration für GN pans) with

integrated steam generator and slide in rails for the removable hinged doors and accessories. GN-suspension frame with holes for 100 mm GN; dividers for GN 2/4, with humidity distribution slider; air deflector on the customer side that can also be used to hold serving utensils. Including water tank and decalcification system for water treatment.


















■■ Interior suitable for GN 3 /1. Usable depth of up to GN 100 mm or alternatively up to 150 mm deep with the use of a support frame. Different presentation possibilities for goods, using various GN pans and decor variations.















COMFORT E-112-70 Slide-in1125 x 695/917** x 700*/1600 mm4,0 kW400 V / 50 Hz

COMFORT E-112-70 PRO1115 x 695/917** x 700*/1600 mm4,0 kW400 V / 50 Hz








■■ With additional display area (black glass board) for a variety of goods with a high turnover.







■■ Customer side: Front glass made of ESG for full transparency of goods on offer – liftable for easy cleaning. The glass position can be changed single handedly without the need for tools and can be used as a cough and sneeze guard. For closed operation only.




MODELSGlass height: 700 mm → Operators cannot serve guests directly by reaching over the top of the unit. Design of the glass: angular (squared)Mounting options: Slide-in for insertion on the operating side of counters or version PRO for use as a freestanding appliance respec-tively with casters for use as a mobile unit.



Kombinationsvitrine SNACKY WK UB

Multifunctional heated and cold display case where fresh food is presented, prepared and stored, all in one unit. Operating modes are circulating air cooling (product presentation), still cooling (product storage) neutral and dry heat by means of infrared support heat and primary hotplate.The compact design with pull out cutting boards and underlying storage allow the operator to finish in front of the guests. Temperature range +65 °C as well as -1 up to +7 °C (climate class M2) at a room temperature of +25 °C.

Two in One: Heating and cooling in one appliance. Hotplate and infrared support for keeping food hot with additional hot board and energy efficient cooling and neutral board.Fresh Preparation: Storage for hot and cold dishes together with a stock of ingredients. With the sliding, removable cutting and preparation boards, it’s easy to cater for daily business and individual customer requirements.Daily Concept: Morning until evening presentation, flexible use and easy to handle.Just in Time: Optimal response to change in customer traffic. 100 % guest orientation.Maximum Space: Presentation and usable space for 7 ½ GN – in the smallest space.

AUSFÜHRUNG■■ Insulation: Hard Polyurethane foam

■■ Made entirely of stainless steel. All visible interior and exterior surfaces are polished. Surrounding GN support frame. Sidewalls inside are highly polished for a mirror effect for visual extension of the sales area.

■■ All glass of ESG, liftable front glass (Easy-Change) – interchangeable for either self service or assisted service. Change single handedly without the need for special tools, use as a cough and sneeze guard. Glass side panels fitting flush up to the cutting boards provide a high level of transparency for a perfect view of the display and food being prepared.

■■ Interior LED lighting arranged horizontally. Natural warm colour reproduction.

■■ Interior suitable for 2 x 2 GN 1/1.

■■ Two impluse purchase shelves, positioned at eye level extends the presentation area. They can be used for hot or cold food. Maximise the use of the presentation areas by using different GN pans with accessories and a variety of inserts.

GRUNDAUSSTATTUNG■■ Operating side: Heated area for storing pans: 4 x GN 1/3 or 8 x GN 1/6- pans up to 150 mm high including dividers,

suitable for hot food under the sliding cutting board. Cooling area for storing pans: 4 x GN 1/3 or 8 x GN 1/6-pans up to 150 mm high – suitable for chilled food and ingredients under the pull out cutting board. Substructure with refrigerated storage drawer (with rear wall evaporator) for GN 2/1; ventilation unit with automatic condensate evaporation; including plinth with adjustable feet; optional paper holder.

■■ Customer side: Heated area with heating plate (primary heat) for GN 2/1 (and their dividers) with multifunctional frame for use with GN pans including two height adjustable or inclinable supporting boards. Infrared support heat to keep the food hot together with an additional hot shelf. Cooling with air circulation for GN 2/1 with two height adjustable or inclinable supporting shelves with dividers as well as with neutral shelf. Front glass made of ESG with full transparency of goods on offer – can be lifted up for easy cleaning of the entire interior. The glass position can be changed single handedly without the need for special tools, and can be used as a cough and sneeze guard.

■■ Control/Operation: User friendly symbols for operating all modes on the control panel; one touch button control.

MODELSGlass height: 530 mm on the operating side, 635 mm on the customer side.Design of the glass: angular (square) with Easy-Change-System.Mounting options: Slide-in to insert on the opertating side in counter cut-outs.

SNACKY WK GE-151-E UBDimensions (WxDxH): 1510 x 1115 x 1435 mmPower consumption cooling operation: 705 W evap. @ -10 °CPower consumption heating operation: 2 kWVoltage: 230 V / 50 Hz



Kombinationsvitrine SNACKY WK

SNACKY WK GE-151-EDimensions (WxDxH): 1510 x 1115 x 1435 mmPower consumption cooling operation: 500 W evap. @ -10 °CPower consumption heating operation: 2 kWVoltage: 230 V / 50 Hz

Multifunctional heated and cold display case where fresh food is presented, prepared and stored, all in one unit. Operating modes are circulating air cooling (product presentation), still cooling (product storage) neutral and dry heat by means of infrared support heat and primary hotplate.The compact design with pull out cutting boards and underlying storage allow the operator to finish in front of the guests. Temperature range +65 °C as well as -1 up to +7 °C (climate class M2) at a room temperature of +25 °C.

Two in One: Heating and cooling in one appliance. Hotplate and infrared support for keeping food hot with additional hot board and energy efficient cooling and neutral board.Fresh Preparation: Storage for hot and cold dishes together with a stock of ingredients. With the sliding, removable cutting and preparation boards, it’s easy to cater for daily business and individual customer requirements.Daily Concept: Morning until evening presentation, flexible use and easy to handle.Just in Time: Optimal response to change in customer traffic. 100 % guest orientation.Maximum Space: Presentation and usable space for 7 ½ GN – in the smallest space.

AUSFÜHRUNG■■ Insulation: Hard Polyurethane foam

■■ Made entirely of stainless steel. All visible interior and exterior surfaces are polished. Surrounding GN support frame. Sidewalls inside are highly polished for a mirror effect for visual extension of the sales area.

■■ All glass of ESG, liftable front glass (Easy-Change) – interchangeable for either self service or assisted service. Change single handedly without the need for special tools, use as a cough and sneeze guard. Glass side panels fitting flush up to the cutting boards provide a high level of transparency for a perfect view of the display and food being prepared.

■■ Interior LED lighting arranged horizontally. Natural warm colour reproduction.

■■ Interior suitable for 2 x 2 GN 1/1.

■■ Two impluse purchase shelves, positioned at eye level extends the presentation area. They can be used for hot or cold food. Maximise the use of the presentation areas by using different GN pans with accessories and a variety of inserts.

GRUNDAUSSTATTUNG■■ Operating side: Heated area for storing pans: 4 x GN 1/3 or 8 x GN 1/6- pans up to 150 mm high including dividers,

suitable for hot food under the sliding cutting board. Cooling area for storing pans: 4 x GN 1/3 or 8 x GN 1/6-pans up to 150 mm high – suitable for chilled food and ingredients under the pull out cutting board. Optional paper holder.

■■ Customer side: Heated area with heating plate (primary heat) for GN 2/1 (and their dividers) with multifunctional frame for use with GN pans including two height adjustable or inclinable supporting boards. Infrared support heat to keep the food hot together with an additional hot shelf. Cooling with air circulation for GN 2/1 with two height adjustable or inclinable supporting shelves with dividers as well as with neutral shelf. Front glass made of ESG with full transparency of goods on offer – can be lifted up for easy cleaning of the entire interior. The glass position can be changed single handedly without the need for special tools, and can be used as a cough and sneeze guard.

■■ Control/Operation: User friendly symbols for operating all modes on the control panel; one touch button control.

MODELSGlass height: 530 mm on the operating side, 635 mm on the customer side.Design of the glass: angular (square) with Easy-Change-System.Mounting options: Slide-in to insert on the opertating side in counter cut-outs.

Mod

el S

peci

ficat

ions

_WV

_07/

2015

heated display cases & snacky - ideal ake · design of the glass: angular (squared) or slant...

Documents