heart rate monitor u sing light transmission
DESCRIPTION
Heart Rate Monitor U sing Light Transmission . Team B Yokaira Cabrera Chavonna Spencer. Introduction. Our group designed a device, which monitors heart rate by using variation in absorption of light through the finger. B. C. Background. - PowerPoint PPT PresentationTRANSCRIPT
Team BYokaira Cabrera
Chavonna Spencer
Our group designed a device, which monitors heart rate by using variation in absorption of light through the finger.
B.C.
The amount of blood in the finger limits the amount of light absorbed by the photodiode.
Electro Magnetic Spectrum
Charge Current Resistance Voltage
A.
B.
LED Photodiode Breadboard
A.
B.
C.
Testing Different LEDs for which had highest Voltage With Finger & without Finger
Use of Amp Meter to measure 75% of Absolute Maximum Current
Breadboard Circuitry
Table Representing Nine Different Voltages
Equipment Set Up- Heart Rate Monitor- Photodiode Circuit- LED Circuit
Began to Test Heart Rate Monitor- Made sure we did not cut off our
circulation- Filtered out ambient light (pictures of frequency
transitions)specifically 1,000Hz)
1-10Hz 10-100Hz 100-1000Hz 1000-10000Hz
Maximum Frequency How Heart Rate Was Calculated Best Working LED (IR)
Dave_Green_LED Chavonna_Purple_LED
Chavonna_IR_LED Yokaira_Red_LED
Chavonna Before Running Chavonna After Running
83bpm 170bpm
Chavonna: IR LED Chavonna: Super Red LED
We were able to get the heart rate monitor to work
The IR work best for all skin tones The Red LED did not work for darker skin
tones
Jackie Bortiatynski Jody Markley (Director of UBMS) Derek James (Assistant Director of UBMS) Professor Alexay Kozhevnikov SEECoS David McLaughlin Pam Monk