health hazards in the me labs anca bejan ([email protected], 1-2509)[email protected] environmental, health and...
TRANSCRIPT
![Page 1: Health hazards in the ME labs Anca Bejan (ab4@vt.edu, 1-2509)ab4@vt.edu Environmental, Health and Safety Services](https://reader036.vdocuments.site/reader036/viewer/2022062404/5518051f55034693228b4d82/html5/thumbnails/1.jpg)
Health hazards in the ME labs
Anca Bejan ([email protected], 1-2509)
Environmental, Health and Safety Services
![Page 2: Health hazards in the ME labs Anca Bejan (ab4@vt.edu, 1-2509)ab4@vt.edu Environmental, Health and Safety Services](https://reader036.vdocuments.site/reader036/viewer/2022062404/5518051f55034693228b4d82/html5/thumbnails/2.jpg)
Outline
Routes of exposure Exposure control Limits of exposure Epoxy resins/systems Fiberglass Personal Protective Equipment selection Respirator use at VT
![Page 3: Health hazards in the ME labs Anca Bejan (ab4@vt.edu, 1-2509)ab4@vt.edu Environmental, Health and Safety Services](https://reader036.vdocuments.site/reader036/viewer/2022062404/5518051f55034693228b4d82/html5/thumbnails/3.jpg)
Routes of exposure
Inhalation Ingestion Skin/eye contact
![Page 4: Health hazards in the ME labs Anca Bejan (ab4@vt.edu, 1-2509)ab4@vt.edu Environmental, Health and Safety Services](https://reader036.vdocuments.site/reader036/viewer/2022062404/5518051f55034693228b4d82/html5/thumbnails/4.jpg)
Exposure controls
Engineering controls (ventilation, enclosures, substitution of material)
Administrative controls (work practices)
Personal Protective Equipment (eye protection, gloves, foot protection, respirators)
![Page 5: Health hazards in the ME labs Anca Bejan (ab4@vt.edu, 1-2509)ab4@vt.edu Environmental, Health and Safety Services](https://reader036.vdocuments.site/reader036/viewer/2022062404/5518051f55034693228b4d82/html5/thumbnails/5.jpg)
Exposure limits
Are there any “safe” limits of exposure? YES Susceptibility to effects also depends on: pre-existing medical
conditions, age, gender, lifestyle choices, genetic factors, medications, physical exertion, etc.
OSHA – enforcement (most limits are from early 1970s) ACGIH, AIHA, NIOSH – recommended limits based on most
recent studies on animal or human health effects Limits are set as 8 h TWA, 15 min TWA, Ceiling (ppm, mg/m3) Excursion limits Limits are intended to protect “nearly all workers” from adverse
health effects while working 40 h weeks for about 40 years
![Page 6: Health hazards in the ME labs Anca Bejan (ab4@vt.edu, 1-2509)ab4@vt.edu Environmental, Health and Safety Services](https://reader036.vdocuments.site/reader036/viewer/2022062404/5518051f55034693228b4d82/html5/thumbnails/6.jpg)
Health effects
Adverse health effects Acute (immediate or delayed reaction) Chronic
Nature and intensity of effects depends on: Intensity of exposure Duration of exposure Type of exposure Health condition Additive effect, chemical mixtures, etc
![Page 7: Health hazards in the ME labs Anca Bejan (ab4@vt.edu, 1-2509)ab4@vt.edu Environmental, Health and Safety Services](https://reader036.vdocuments.site/reader036/viewer/2022062404/5518051f55034693228b4d82/html5/thumbnails/7.jpg)
Determining contaminant concentration in air
Personal sampling Pumps Specific filters Sampling tubes Clorimetric tubes Portable instruments
![Page 8: Health hazards in the ME labs Anca Bejan (ab4@vt.edu, 1-2509)ab4@vt.edu Environmental, Health and Safety Services](https://reader036.vdocuments.site/reader036/viewer/2022062404/5518051f55034693228b4d82/html5/thumbnails/8.jpg)
Determining contaminant concentration in air
Your nose is NOT a reliable instrument Olfactory fatigue Odor treshold vs PEL, STEL, Ceiling
Acetone: 16-600 ppm (OSHA PEL: 1000 ppm ACGIH TLV: 500 ppm)
Styrene: 0.04-0.32 ppm (PEL: 100 ppm, TLV: 20 ppm)
Methylene Chloride: 25-320 ppm (PEL: 25 ppm, STEL: 125 ppm, TLV: 50 ppm)
Fiberglass: no OT; TLV: 0.1 f/cc
![Page 9: Health hazards in the ME labs Anca Bejan (ab4@vt.edu, 1-2509)ab4@vt.edu Environmental, Health and Safety Services](https://reader036.vdocuments.site/reader036/viewer/2022062404/5518051f55034693228b4d82/html5/thumbnails/9.jpg)
Epoxy systems
Used in composite materials Cure at room temperature Have two parts: epoxy resin and curing agent Epoxy resin: epichlorohydrin and bisphenol-A Curing agent: a combination of amine
compounds
![Page 10: Health hazards in the ME labs Anca Bejan (ab4@vt.edu, 1-2509)ab4@vt.edu Environmental, Health and Safety Services](https://reader036.vdocuments.site/reader036/viewer/2022062404/5518051f55034693228b4d82/html5/thumbnails/10.jpg)
Epoxy systems
![Page 11: Health hazards in the ME labs Anca Bejan (ab4@vt.edu, 1-2509)ab4@vt.edu Environmental, Health and Safety Services](https://reader036.vdocuments.site/reader036/viewer/2022062404/5518051f55034693228b4d82/html5/thumbnails/11.jpg)
Epoxy systems- Health effects of the components
Epichlorohydrin- skin sensitizer, URT irritant, affects male reproductive system; known animal carcinogen
Bisphenol A- endocrine disruptor
Amines- may induce asthma and URT sensitization; some are carcinogens
Solvents- 2 ethoxyethanol (EGEE) and 2- methoxyethanol (EGME) affect the male reproductive system and may produce embrio/fetal damage
Solvents- affect CNS and PNS
![Page 12: Health hazards in the ME labs Anca Bejan (ab4@vt.edu, 1-2509)ab4@vt.edu Environmental, Health and Safety Services](https://reader036.vdocuments.site/reader036/viewer/2022062404/5518051f55034693228b4d82/html5/thumbnails/12.jpg)
Epoxy use in the WARE lab
MAS Epoxies
www.masepoxies.com, look for MSDS info
![Page 13: Health hazards in the ME labs Anca Bejan (ab4@vt.edu, 1-2509)ab4@vt.edu Environmental, Health and Safety Services](https://reader036.vdocuments.site/reader036/viewer/2022062404/5518051f55034693228b4d82/html5/thumbnails/13.jpg)
MSDS
Material Safety Data Sheet (MSDS) Contains information about chemical composition of the product,
hazard information, first aid measures, storage, handling and PPE requirements, fire fighting measures, accidental release measures, etc.
Every product used in the WARE lab must have an MSDS on file
YOU MUST BE FAMILIAR WITH THE MSDSs OF THE PRODUCTS YOU ARE USING!!!
KNOW WHERE THEY ARE LOCATED IN THE LAB AND HAVE A COPY WITH YOU IF YOU NEED TO GO TO THE HOSPITAL
![Page 14: Health hazards in the ME labs Anca Bejan (ab4@vt.edu, 1-2509)ab4@vt.edu Environmental, Health and Safety Services](https://reader036.vdocuments.site/reader036/viewer/2022062404/5518051f55034693228b4d82/html5/thumbnails/14.jpg)
MAS- Low viscosity epoxy resin
![Page 15: Health hazards in the ME labs Anca Bejan (ab4@vt.edu, 1-2509)ab4@vt.edu Environmental, Health and Safety Services](https://reader036.vdocuments.site/reader036/viewer/2022062404/5518051f55034693228b4d82/html5/thumbnails/15.jpg)
MAS -resin
So what is the chemical composition of this resin?
- DGE-BPA (diglycidyl ether of bis-phenol A)
- Novolak - Two-step resins made by reacting epichlorohydrin with phenol formaldehyde condensates (has more than just 2 groups of epoxy per molecule) (http://composite.about.com/library/glossary/e/bldef-e2003.htm)
- epoxy diluents (solvents)
![Page 16: Health hazards in the ME labs Anca Bejan (ab4@vt.edu, 1-2509)ab4@vt.edu Environmental, Health and Safety Services](https://reader036.vdocuments.site/reader036/viewer/2022062404/5518051f55034693228b4d82/html5/thumbnails/16.jpg)
MAS- medium hardener
![Page 17: Health hazards in the ME labs Anca Bejan (ab4@vt.edu, 1-2509)ab4@vt.edu Environmental, Health and Safety Services](https://reader036.vdocuments.site/reader036/viewer/2022062404/5518051f55034693228b4d82/html5/thumbnails/17.jpg)
More info
![Page 18: Health hazards in the ME labs Anca Bejan (ab4@vt.edu, 1-2509)ab4@vt.edu Environmental, Health and Safety Services](https://reader036.vdocuments.site/reader036/viewer/2022062404/5518051f55034693228b4d82/html5/thumbnails/18.jpg)
Working safely with epoxy resins
A. Avoid all direct skin contact with resin, hardeners and mixed epoxy by wearing gloves and other clothing. Clean any uncured epoxy off the skin with waterless soap immediately after contact. NEVER use solvents to remove epoxy from the skin. Always wash thoroughly with soap and water immediately after contact.
B. Protect your eyes by wearing protective eye wear. If contact should occur, flush eyes immediately with running water for 15 minutes. If discomfort continues, seek medical attention.
C. Avoid breathing vapors. Use epoxy only in areas with good ventilation. In small areas, be careful have a supply of fresh air and to exhaust any fumes. Wear a respirator with an organic vapor cartridge. Wear a dust mask when you sand the epoxy. If it has cured for less than a week, use a respirator with the organic vapor in combination with a dust pre-filter.
D. Avoid ingestion. Wash thoroughly after each use and especially before eating or drinking.
http://masepoxies.com/mas8.htm
![Page 19: Health hazards in the ME labs Anca Bejan (ab4@vt.edu, 1-2509)ab4@vt.edu Environmental, Health and Safety Services](https://reader036.vdocuments.site/reader036/viewer/2022062404/5518051f55034693228b4d82/html5/thumbnails/19.jpg)
Fiberglass
Used as filler (fibers of different sizes and composition)
Used as woven material
![Page 20: Health hazards in the ME labs Anca Bejan (ab4@vt.edu, 1-2509)ab4@vt.edu Environmental, Health and Safety Services](https://reader036.vdocuments.site/reader036/viewer/2022062404/5518051f55034693228b4d82/html5/thumbnails/20.jpg)
Fiberglass exposure
Occurs when the fibers become airborne: Sanding Polishing Shearing/cutting Mixing
Routes of exposure: inhalation, skin/eye contact, ingestion
![Page 21: Health hazards in the ME labs Anca Bejan (ab4@vt.edu, 1-2509)ab4@vt.edu Environmental, Health and Safety Services](https://reader036.vdocuments.site/reader036/viewer/2022062404/5518051f55034693228b4d82/html5/thumbnails/21.jpg)
Fiberglass-health effects
Depend on the physical dimensions and composition of the fiber (in addition to the factors mentioned previously)
Irritation and infection of nasal mucuous membrane Lung fibrosis Skin irritation
![Page 22: Health hazards in the ME labs Anca Bejan (ab4@vt.edu, 1-2509)ab4@vt.edu Environmental, Health and Safety Services](https://reader036.vdocuments.site/reader036/viewer/2022062404/5518051f55034693228b4d82/html5/thumbnails/22.jpg)
Exposure control
Use appropriate ventilation!
Do NOT dry sweep. Vacuum or wet the dust before cleaning!
![Page 23: Health hazards in the ME labs Anca Bejan (ab4@vt.edu, 1-2509)ab4@vt.edu Environmental, Health and Safety Services](https://reader036.vdocuments.site/reader036/viewer/2022062404/5518051f55034693228b4d82/html5/thumbnails/23.jpg)
Exposure control
Always use gloves Wear long sleeves shirts, long pants and
shoes (NO sandals) Do NOT take contamination home!!
Always wash hands and face before leaving Change in “work clothes” when you are in the lab When taking them home use a closed bag Launder them separately
![Page 24: Health hazards in the ME labs Anca Bejan (ab4@vt.edu, 1-2509)ab4@vt.edu Environmental, Health and Safety Services](https://reader036.vdocuments.site/reader036/viewer/2022062404/5518051f55034693228b4d82/html5/thumbnails/24.jpg)
What kind of gloves?
Very few gloves are suitable for use with all the chemicals you might encounter in the lab
Know where to find info about the right kind of glove (MSDS, glove manufacturer charts, etc)
Epoxy – manufacturer recommends neoprene glove Acetone – butyl glove ONLY Disposable latex gloves are NOT intended for
protection against chemicals and may induce sensitization to the latex protein
![Page 25: Health hazards in the ME labs Anca Bejan (ab4@vt.edu, 1-2509)ab4@vt.edu Environmental, Health and Safety Services](https://reader036.vdocuments.site/reader036/viewer/2022062404/5518051f55034693228b4d82/html5/thumbnails/25.jpg)
Glove selection chart
![Page 26: Health hazards in the ME labs Anca Bejan (ab4@vt.edu, 1-2509)ab4@vt.edu Environmental, Health and Safety Services](https://reader036.vdocuments.site/reader036/viewer/2022062404/5518051f55034693228b4d82/html5/thumbnails/26.jpg)
Respirators
Recommended ONLY when engineering and administrative controls are not sufficient to minimize exposure
Last line of defense Can be a health hazard to the user Have several limitations that must be understood BEFORE
you decide to wear them Do NOT fit everybody, don’t work with beards, and don’t
work at all if you are using an inappropriate filter ALWAYS consult with EHSS before you purchase ANY dust
mask or cartridge respirator
![Page 27: Health hazards in the ME labs Anca Bejan (ab4@vt.edu, 1-2509)ab4@vt.edu Environmental, Health and Safety Services](https://reader036.vdocuments.site/reader036/viewer/2022062404/5518051f55034693228b4d82/html5/thumbnails/27.jpg)
Respirators
![Page 28: Health hazards in the ME labs Anca Bejan (ab4@vt.edu, 1-2509)ab4@vt.edu Environmental, Health and Safety Services](https://reader036.vdocuments.site/reader036/viewer/2022062404/5518051f55034693228b4d82/html5/thumbnails/28.jpg)
Where can I find more info?
- Manufacturer websites- www.osha.gov- http://www.atsdr.cdc.gov/- http://www.cdc.gov/niosh/homepage.html- http://www.iarc.fr/- http://www.bestglove.com/- http://www.ansell.com- VT EHSS : www.ehss.vt.edu