hdm steel pipe
DESCRIPTION
HDM offers value-added services for its customers. These services include, but are not restricted to, the following: - Combi-walls design ; piles and interlocks – C6/C9 compatible with Larrsen type infill sheet piles. With or without sheet piles - Custom designs: piles & reinforcements - Special design piles made out of different wall thicknesses - Special design coating applications •Different coating applications on one pile • Up to 70 meter piles, surface preparation by automatic shut blasting up to SA3 grade up to 100 meter • Level marking • Creating special solutions depending on job site conditions & customer pile driver requirements.TRANSCRIPT
Istanbul OfficeZumrutevler Mah. Hanimeli Cad. No. 2/2 34852 Maltepe - Istanbul - TURKEYPhone: +90 (216) 442 26 26 Fax: +90 (216) 442 20 [email protected]
Spirally Welded Steel Pipe Inc.
FactoryKaraduvar Mah. Serbest Bolge 3. Cadde No.10 33020 Akdeniz - Mersin - TURKEYPhone: +90 (324) 232 17 94Fax: +90 (324) 232 17 [email protected]
About HDM Steel Pipe
References
On site production Served Industries
Certificates
Products
HDM Steel Pipe was established in 2002 in Gebze, Turkey.
HDM Steel Pipe’s vision is based on specialization in “Total Foundation Pipe Solutions
by providing Project support to the industry”. In accordance with this vision, HDM Steel Pipe
started its Mersin Free Zone Production Operations in 2009. HDM Steel Pipe has a unique facility
in Mersin, producing Foundation Spirally Welded Pipes with its interlocks, tailor made pile shoes,
reinforcement rings for foundations.
The production capacity of foundation piling pipes is 150,000 tons annually and %100
products are exporting to more than 25 countries all over the globe.
Thickness’ above 28 mm, which is beyond world steel mills’ production range for hot rolled
coils, is overcome by manufacturing subject pipes in HSAW from plates up to 35 mm and
unit weight of pipe up to 80 tons. This makes HDM Steel Pipe a world leader in large diameter
helical seam submerged arc welded pipe. HDM Steel Pipe is low cost base production company
with the capability of producing its own equipment so the company becomes competitive and strong
player in the global market.
HDM Steel Mill is located inside of Mersin Free Zone and has direct access to Mersin Port facilities which
enables the handling and loading of pipe in length up to 63 meters long with utilizing its own equipment,
cranes and staff so that pipes are delivered to the destination on time and in perfect condition. HDM Steel Pipe
is being active and prudent in enhancing international cooperation and expanding its business with Project-Based
Partnerships with the world’s leaders.
Predestined, systematic and continuous improvements on our production and equipment
enabled us to achieve our today’s reputation and success on Piling Sector.
HDM Steel Pipe has a proven reliable
and reputable track record, in local and
internationally. The company is conducting
its business transparently and long term
with its partners and clients. HDM Steel Pipe
enjoy the privilege to support its international
customers such as Arcelor Mittal Projects,
Saipem, Archiredon, GS Engineering, Afcons
as well as the others, whom are serving
for major authorities and corporations like
Takreer, Adnoc, Zakum and port authorities
from all around the globe.
Foundation Pipe Solutions HDM Steel Pipe offers value-added services for its customers.
These services includes, but are not restricted to, the following:
• Combi-walls design; piles and interlocks – C6/C9 compatible with
“Larrsen Type” infill sheet piles (with or without sheet piles.)
• Custom design piles & reinforcements
• Special design piles made out of different wall thicknesses
• Special design coating applications
- Different coating applications on one pile
- Up to 63 meter piles, surface preparation by automatic
shut blasting up to SA3 grade up to 100 meters
- Level marking
- Creating special solutions depending on job site
conditions & customer pile driver requirements
By this means, HDM Steel Pipe Mobile Plant Solutions provides;
• Competitive prices
• Exact length production as per-job sites requirements
eliminating inevitable scrap originating from pile lengths
due to soil conditions
• Minimizing logistics
• Provides daily pipe production as per-customer time table
• Mobile production can be performed any job site / country out
of Turkey as well where weight / measurement ratio creates
a big burden for competition
• Oil & Gas (Api 5l) • LNG & Storage Tank Terminals
• Refineries • Crude Oil Loading Terminals
• Petrochemical Plants • Container & Break Bulk Terminals
• Ports, Piers & Harbors • Bridges & Transportation
HDM Steel Pipe’s Company policy is based on customer satisfaction, quality, technology and
workmanship with proven works and discipline.
HDM Steel Pipe’s production is strictly applied to API 5L standards for LNG terminal jetties,
crude oil loading terminal jetties, refineries, and petrochemical plants and also carrying out
the production standards EN 10219, ASTM A 252.
HDM Steel Pipe’s all facilities are accredited with ISO 9001, OHSAS 18001 and
ISO 14001 Quality Management System and health, safety and environmental certificates.
HDM Steel Pipe’s management and staff strictly obey applicable safety, environmental and
health legislations which brings the success.
Our manufacturing facilities offer wide range of diameter, thickness and length possibilities.
Mersin plant has been specially designed for heavy wall thickness and long length pipes.
The line can also perform automatic shot blasting, coating, welding interlocks and structures to subject long lengths.
HDM Steel Pipe has its own production designs and doing on site pipe production and coating with producing its own equipment
and steel structures in-house. Mobile plant mobilization and demobilization, production of pile & coating on site for major foundation
projects, provide maximum time and cost benefits to the Customer by minimizing logistics efforts.
Outside diameter 20” and 130”
Wall thicknesses 6 mm to 35 mm ( Above 25 mm, production is carried out from plates)
Pipe length up to 63 meters and pile weight up to 80 mtons
Steel grade up to X70 PSL2
External coatingPolyethylene (PE)Fusion Bonded Epoxy (FBE)Epoxy (EP)
Production capacity 150,000 tons of Foundation Pipe per year