hdb sor - jul 2013
TRANSCRIPT
STANDARD SCHEDULE OF RATES FOR:
BUILDING WORKS,
CIVIL ENGINEERING WORKS AND
ELECTRICAL WORKS
(JUL 2013 EDITION)
HOUSING AND DEVELOPMENT BOARD
STANDARD SCHEDULE OF RATES
FOR
BUILDING WORKS (JUL 2013)
CONTENTS
S/N DESCRIPTION PAGE
GENERAL PREAMBLES 1 - 3
PARTICULAR PREAMBLES TO VARIOUS TRADES 4 - 18
1 EXCAVATION 19 - 21
2 CONCRETE WORK 22 - 31
3 BRICKWORK AND BLOCKWORK 32 - 33
4 FLOOR FINISHES 34 - 39
5 ROOFING 40 - 41
6 CARPENTRY AND JOINERY 42 - 47
7 IRONMONGERY 48 - 50
8 STRUCTURAL STEELWORK & METALWORK 51 - 66
9 WALL AND CEILING FINISHES 67 - 68
10 SANITARY, WATER AND GAS INSTALLATION 69 - 86
11 GLAZING 87 - 88
12 PAINTING AND DECORATING 89 - 91
13 TURFING, TREE PLANTING & LANDSCAPING WORKS 92 - 94
14 MISCELLANEOUS 95 - 97
15 DAYWORK 98 - 100
Published by Housing and Development Board, Republic of Singapore.
No part of this document may be reproduced or copied in any form or
by any means without the prior written permission of the publisher.
Page 1 of 100
GENERAL PREAMBLES Introduction
1.1 The clauses in the General Preambles shall apply to all work items
contained in the Standard Schedule of Rates. 1.2 The Particular Preambles to each Trade shall be read in conjunction with
the respective Trade in the Standard Schedule of Rates. 1.3 All rates include the allowances for complying with the General and
Particular Preambles. 2 All rates contained in the Standard Schedule of Rates are fixed basic
rates (in Singapore Currency) and no amendment whatsoever shall be made to such rates. The tenderers shall be deemed to have closely studied all rates contained herein and duly noted their implications.
3 All rates contained in this Standard Schedule of Rates are exclusive of
any Goods and Services Tax. Any such Goods and Services Tax shall be borne by the HDB as and when the same becomes due and payable.
4 All work, materials and goods described in this Standard Schedule of
Rates shall be of the respective kinds described in the Contract and in accordance with the instructions of the Superintending Officer or the Superintending Officer's Representative.
5 Headings to groups of items shall be read as part of the descriptions of
the items to which the headings apply. 6 Where brand/trade names are given in the descriptions, they are solely
intended for fixing the rates of the items. The products and materials to be used in the contract shall be governed by the specifications, Drawings and other documents forming the contract (and not this Schedule of Rates).
Description of Works and Inclusions
7 Unless specifically stated otherwise, the following shall be deemed to be included in the description of the item of work:-
a) Labour and all costs in connection therewith including the labour in
fabricating, assembling, setting, fitting and fixing of materials and goods in position.
Page 2 of 100
GENERAL PREAMBLES
Description of Works and Inclusions (Cont’d)
b) Materials and goods including materials required for lapping, jointing and the like and all costs in connection therewith such as delivery, unloading, storing, returning of packings, handling, hoisting and lowering.
c) Preparing surfaces to receive work.
d) Protecting materials and work. e) Waste of materials.
f) All cutting and waste.
g) Use of construction equipment, tools, vehicles and all costs in
connection therewith.
h) Cleaning up on completion and making good all work disturbed.
i) General requirements set out in the Specifications, Drawings and other documents forming the Contract.
j) Establishment charges, overhead and profit.
8 Unless otherwise stated, all work shall be measured net as fixed in its place.
9 Where minimum deductions of voids are dealt with in this document they
shall refer only to openings or voids which are within the boundaries of measured area. Openings or voids which are at the boundaries of measured area shall always be the subject of deductions irrespective of size.
Billing of Quantities
10.1 Where the unit of measurement is the linear metre, square metre and cubic metre, quantities shall be billed to the nearest whole unit. Fractions of the unit less than half shall be disregarded and all other fractions shall be regarded as a whole unit.
Page 3 of 100
GENERAL PREAMBLES
Billing of Quantities (Cont'd) 10.2 Where the unit of measurement is the kilogramme, quantities shall be
billed to the nearest whole unit. Fractions of a unit less than half shall be disregarded and all other fractions shall be regarded as a whole unit. Where the unit of billing is the tonne or litre, quantities shall be billed to the nearest two places of decimals.
10.3 Where the unit of measurement is the hour, fractions of the unit shall be billed to the nearest next half hour. 10.4 Where the application of clauses 11.1 and 11.2 would cause an entire
item to be eliminated, such item shall be billed to the nearest two places of decimals.
11 Where rates with descriptions pertain to the same purpose are listed in
more than one Standard Schedule of Rates incorporated in the Contract; the rate as listed in the following schedules (in the stated order of precedence) shall prevail:-
1st Precedence - Standard Schedule of Rates for
Building Works
2nd Precedence - Standard Schedule of Rates for Civil Engineering Works
3rd Precedence - Standard Schedule of Rates for
Electrical Works 12 Unless otherwise stated, the term "as specified" means as specified in
any of the documents forming part of the Contract. 13 The following abbreviations are used for the units:-
m - Linear metre m2 - Square metre m3 - Cubic metre no - Number kg - Kilogram ton - Tonne pr - Pair sht - Sheet ltr - Litre hr - Hour
Page 4 of 100
PARTICULAR PREAMBLES TO VARIOUS TRADES
1.0 EXCAVATION
Definition of Ground 1.1 Ordinary ground:- includes spoil or rubbish of every description, rubbish
tip material etc, sand gravel, decomposed granite, red or white earth, loamy or gravelly clay, gravelly laterite, mud, bog or any other formation of pick and shovel and at any depth.
Description
1.2 The description of each item of excavation shall be deemed to include excavating around foundation, piles and confined areas, getting out, removing of bakau piles, trimming, levelling and compacting bottoms of excavations, keeping sides plumb and planking and strutting.
Measurement
1.3.1 The measurement of all excavations and subsequent disposal shall be those before excavating. The increases in bulk and any extra excavation required for earthwork support, planking and strutting and formwork for concrete shall be deemed to be included in the rates.
1.3.2 No allowance for working space shall be made in the measurement of all
excavation unless the method of construction requires workmen to operate from the outside of the structure. In such cases, a working space of 600mm shall be measured from the external face of the structure.
1.3.3 Filling shall be measured as equal to the void to be filled. Any thickness
stated shall be deemed to be after compacting.
Rate 1.3.4 Rates for each item shall be held to include for keeping all excavation free
from water and site dry, pumping or bailing if required and providing any temporary drains required.
1.4 Pre-Treatment of Soil against Subterranean Termites
Measurement 1.4.1 Soil treatment shall be measured flat on plan and the method of
measurement shall be up to the perimeter of the building line (excluding the apron areas). Link buildings, linkways and other structures shall also be similarly measured.
1.4.2 No deduction shall be made in the measurement for plan areas occupied
by the column stumps.
Page 5 of 100
PARTICULAR PREAMBLES TO VARIOUS TRADES 1.0 EXCAVATION (CONT’D) 1.4.3 The rates indicated shall be inclusive of the provision of warranty and
shall not in any way affect the provisions of Building Specifications on Pre-Treatment of Soil for Protection of Buildings Against Subterranean Termites which provisions remain applicable in every respect in relation to all situations where these rates are applied.
2.0 CONCRETE WORK
Rate 2.1 Rates for each item of concrete shall be held to include the following:-
a) Forming, cutting grooves, chases, mortices, holes and making good any other sundry items of a like nature.
b) Extra labour for laying to falls, or cambers and preparing surfaces
to receive screeds or pavings also to be included.
c) All tests on concrete, cement and aggregate etc, as required and compliance with the strengths as specified.
d) Tamping and/or vibrating to give thorough compaction; working
between and around reinforcements.
e) Laying on any type of sub-base; preparing and leaving surfaces to receive screeds or paving.
Deduction
2.2 No deduction shall be made in the measurement of concrete work for:- a) Voids of 0.05 cubic metre or less.
b) Volume of the reinforcement and steelwork.
c) Openings in walls, floor, roof slabs and the like of 0.10 square
metre or less. Measurement 2.2.1 In the measurement of concrete for pile caps, the overall dimensions of
the pile caps shall be taken. No deduction shall be made for the precast formwork panels.
Page 6 of 100
PARTICULAR PREAMBLES TO VARIOUS TRADES 2.0 CONCRETE WORK (CONT'D) 2.3 Reinforcement
Description 2.3.1 The description of each item of reinforcement shall be deemed to
include:- a) Allowances in the weight of reinforcement for rolling margins.
b) All cleaning, cutting, bending, fabricating, placing, tying and the
provision of all necessary distance blocks, tying wires, spacers or chairs, temporary fixings and supports.
Measurement 2.3.2 The conversion factor for the various steel reinforcement bars shall be as
follows:
6mm diameter - 0.222 kg/m 7mm diameter - 0.302 kg/m 8mm diameter - 0.394 kg/m 9mm diameter - 0.499 kg/m 10mm diameter - 0.616 kg/m 13mm diameter - 1.042 kg/m 16mm diameter - 1.579 kg/m 20mm diameter - 2.466 kg/m 22mm diameter - 2.984 kg/m 25mm diameter - 3.854 kg/m 28mm diameter - 4.834 kg/m 32mm diameter - 6.313 kg/m
2.4 Fabric Reinforcement
Rate 2.4.1 Rates for each item of fabric reinforcement shall be held to include for
extra material at laps, tying wires and all bending, cutting and notching around obstruction. Only the net area covered shall be measured and no deduction shall be made for opening less than 1.00 square metre.
Page 7 of 100
PARTICULAR PREAMBLES TO VARIOUS TRADES 2.0 CONCRETE WORK (CONT'D) 2.5 Cage Reinforcement
Rate 2.5.1 Rates for each item of cage reinforcement shall be held to include for
extra material at laps.
Measurement 2.5.2 The area of Beam Stirrup Cage Reinforcement shall be the product of the
perimeter of stirrup multiplied by the length of the Cage. 2.5.3 The area of the Capping Link shall be the product of the perimeter of the
Link multiplied by the length of the Cage. 2.5.4 The area for prefabricated pilecap mesh reinforcement shall be based on
the bottom flat area of the mesh reinforcement without considering the upward projecting bars.
2.5.5 The area for dowel mesh reinforcement shall be the product of the length
and breadth which includes the depth of the bend. 2.6 Formwork
Description 2.6.1 The description of each item of formwork shall be deemed to include:-
a) All necessary boardings, supports, erecting, framing, cutting, perforations for pipes, angles, cleaning, wetting and treatment with mould oil, mould liquid or limewhite and the like.
b) All splayed edges, notchings, allowance for overlaps and passings
at angles, battens, strutting, bolting, wedging, easing, striking and removal.
Measurement
2.6.2 Formwork shall be measured to the surface of work sloping more than 15 degree from the horizontal.
Deduction
2.6.3 No deduction shall be made in measurement of formwork for:-
a) Openings less than 1 square metre.
b) Intersection of main and secondary beams.
c) Intersection of beams and stanchion casing or columns.
Page 8 of 100
PARTICULAR PREAMBLES TO VARIOUS TRADES 2.0 CONCRETE WORK (CONT'D) 2.7 Unless otherwise stated, rates for concrete, reinforcement and formwork
shall be applicable to all work irrespective of locality, positions, shapes and height.
2.8 Precast Work
Description 2.8.1 a) All precast concrete components shall be grade 40 concrete as
specified unless otherwise indicated. b) The description of each item of precast work shall be deemed to
include concrete, reinforcement, formwork including the formation and filling of pockets, holes, chases and recesses for anchors, bolts and the like, grouting, pointing of joints, surface finishes, delivery, unloading, hoisting, erecting, fixing including all necessary temporary erection gear, bracing and working platforms.
2.9 Precast Concrete Vent
Measurement 2.9.1 The measurement of precast concrete vents shall be taken by volumes
without deduction of voids. 2.10 Piling Work 2.10.1 Piling work shall be executed in accordance with the relevant
Specifications and the instructions of Superintending Officer's Representative.
Description
2.10.2 The description of each type of piling work shall be deemed to include removal of underground obstructions together with all work in connection therewith unless specifically otherwise provided.
2.10.3 The description of each type of piling work shall be deemed to include
extending piles, dollying and connections unless specifically otherwise provided.
2.10.4 Redriving or intermittent driving necessitated by lengthening or upheaving
of piles or by the removal of obstructions under piles or other causes including moving and repositioning the piling frame shall be deemed to be included with the items of piling.
Page 9 of 100
PARTICULAR PREAMBLES TO VARIOUS TRADES 2.0 CONCRETE WORK (CONT'D) 2.10 Piling Work (Cont'd) Rate 2.10.5 The rate of each item of piling shall be deemed to include:-
a) Handling, pitching, heading, pointing and bracing and providing protective wrought iron ring or helmet to pile.
b) Cutting off surplus and heads of piles, preparing and integrating
reinforcement into pile caps where applicable, extra excavation, backfilling and disposal of debris.
c) Disposing of materials displaced arising out of driving the piles.
2.10.6 The rate of each item of treated timber piles includes the application of
wood preservative to cut off surfaces of piles. 2.10.7 The rate of each item of reinforced concrete piles includes moulds,
reinforcement, preparing heads and extra labour and materials to receive pile extensions.
2.10.8 The rate of each item of pile tests includes provision of all anchors,
platforms, loading and unloading of materials, instruments and monitoring of the tests.
2.10.9 Movement of piling frames into position and about the site, any necessary
excavation or filling required to place the frames, raising or lowering the frames and any staging, barges or the like required to support the frames, shall be deemed to be included with the item of piling. Measurement
2.10.10 Payment for treated timber piles driven shall be the product of the relevant rate per metre run and the penetration depth (measured from tip to cut-off level).
2.10.11 The pay length of each reinforced concrete pile after it is driven into the
ground is measured from the cut-off level of the pile to the end of pile shoe. Notwithstanding the provisions of Billing of Quantities contained in the General Preambles, the pay length of reinforced concrete piles shall be billed to the accuracy of nearest of 10mm.
Page 10 of 100
PARTICULAR PREAMBLES TO VARIOUS TRADES
2.0 CONCRETE WORK (CONT'D) 2.11 Surface Water Channels
Rate 2.11.1 Rates for each item of surface water channels shall be held to include for
all angles, intersections, ends, outlets and extra labour and material for forming grooves or rebates to sides.
Measurement 2.11.2 Where an item is described as “Add to last item for the increase in stages
of 150mm deep”, the difference of any depth less than 150mm shall be paid based on 150mm depth.
3.0 BRICKWORK AND BLOCKWORK
Rate 3.1 The rates for each item of block, brickwork shall be held to include for all
special made blocks, bricks and in-situ concrete in lieu, all rough and fair cuttings, oversailing and receding courses, rough relieving and discharging arches, wedging and pining, raking out joints for and pointing flashings, bedding plates, bedding and pointing of frames, parging and coring flues, labour eaves filling, plumbing angles, forming square and rebated reveals, cut squints or birdsmouths, notches, forming, leaving or cutting chases, holes and mortices, cutting and pining and making good and any other sundry items of a like nature.
3.2 Rates for blockwork and brickwork shall be applicable to all work
irrespective of positions, patterns, shapes and height.
Deduction 3.3 Deductions shall be measured the net sizes of the openings and
recesses, including the extra width or rebated reveals. No deductions shall be made for openings of 0.50 square metre or less.
3.4 Deductions shall be made for strings, sills, lintols and the like only when
exceeding 100mm in height.
Page 11 of 100
PARTICULAR PREAMBLES TO VARIOUS TRADES 4.0 FLOOR FINISHES
Description
4.1 The description of each item of floor finishes shall be deemed to include all temporary rules, temporary grounds, temporary screeds and the like, cutting holes, notching and the like, all normal bedding and pointing materials, providing all necessary samples, cleaning down and making good around pipes, sanitary fixtures and the like, work in narrow widths and small quantities in areas interrupted by seatings, channels and the like, all internal angles, quirks, grooves, throats, drips, coves and rounded external angles not exceeding 25mm radius, angles, stops, intersections, fair ends junctions, wreathed corners and the like on cornices, mouldings, enrichments, coves, skirtings, gutters, channels, strings, kerbs and similar or other sundry items of a like nature.
4.2 The description of each item of floor finishes shall be deemed to include
protecting surfaces from the weather or building operations.
Rate 4.3 Unless otherwise stated, rates in this section are applicable to works at
horizontal surfaces exceeding 300mm wide.
4.4 The rates for skirtings, shall be applicable to the following:- (a) Drops, risers, sides of plinths and curbs and other vertical surfaces
not exceeding 300mm high. (b) Treads, top of curbs and other horizontal surfaces not exceeding
300mm wide. Deduction
4.5 No deduction shall be made for openings of 0.50 square metre or less. 4.6 Measurement
Where an item is described as “Add to (or deduct from) ..... for each 5mm thickness over (or under) ......”, the difference for any thickness less than 5mm shall be paid/deducted based on 5mm thick.
Page 12 of 100
PARTICULAR PREAMBLES TO VARIOUS TRADES 5.0 ROOFING
Description 5.1 The description of each item of roofing shall be deemed to include:-
a) All laps, straight, skew and circular cutting at eaves, verges, top edges, abutments, valleys and hips, cutting holes for pipes, nails, screws, clips, pellets, straps and the like.
b) Chasing the structure for burning-in or tucking in edges of
coverings, flashing and the like.
c) Holes in coverings, underbeds and insulations for pipes, standards and the like and making good.
Deduction
5.2 No deduction shall be made for voids of 0.50 square metre or less. 5.3 Membranes System and Panel Roofing System
Rate 5.3.1 Rates for Waterproofing Membranes System and Panel Roofing System
shall be held to include for narrow widths, small quantities, temporary rules, covering up, protecting after laying and cleaning on completion, all labour to form arrises, fair edges etc., all cuttings and working around pipes, dress down at eaves to form drips or carried up at abutments to walls, pipes, parapets, skirtings, concrete curbs etc. and the like.
5.4 Profiled Sheet Roofing
Description 5.4.1 The description of each item of profiled sheet roofing or cladding shall be
deemed to include all cutting at square and raking abutments, top edges, bedding and pointing eaves fillers, verges, cutting and fitting and making good around outlets, pipes and any other sundry items of a like nature.
Page 13 of 100
PARTICULAR PREAMBLES TO VARIOUS TRADES 6.0 CARPENTRY AND JOINERY
Description 6.1 The description of each item of carpentry work shall be deemed to include
all cutting, notching, boring, sinking, pelleting, fitting, trimming, mitring, halving, morticing, tenoning, dovetailing, scarfing, wedging and all ends, splayed edges, short lengths and temporary supports and any other sundry of a like nature and also all labour in forming, drilling for bolts and fixing in position complete with nails, screws or adhesives.
6.2 The description of each item of joinery work shall be deemed to include all
nailing, gluing, screwing, plugging, cutting, notching, holes, housing ends, mitring ends and shaped ends, angles, junctions, heading joints, short lengths, tongued angles, splayed or rounded edges, chamfers, rebates, grooves and any other sundry items of a like nature including stops and working cross-grain, fitting and hanging and the like.
6.3 Nominal sizes are stated for wrot timber and an allowance of 2.5mm is
permitted for each wrot face. 6.4 Rates for windows and doors include hanging and fixing. 6.5 Where ironmongery is included in the description of doors, it shall be
deemed to include hinges, floor springs, door gears, locks, latches, catches, bolts, closers, holders, padlocks, stoppers, push-bars and plates, pull bars and handles, kickplates, locking eyes and the like as specified.
7.0 IRONMONGERY
Rate
7.1 Rates for each item shall be held to include for supply, delivery to site and fixing complete with all matching screws of the same finish as ironmongery, nails, pins or brads, cutting sinking and boring and morticing as required, oiling and easing and adjusting all moving parts, taking off and refixing after painting where necessary and handing 3 keys properly labelled to the Superintending Officer or the Superintending Officer's Representative etc unless otherwise described.
Page 14 of 100
PARTICULAR PREAMBLES TO VARIOUS TRADES 8.0 STRUCTURAL STEELWORK AND METALWORK 8.1 Description The description of each item of work shall be deemed to include:-
a) Allowances for rolling margins and the weight of welding materials.
b) Shop and site fabrication including drilling, cutting (including holes and openings for other trades), notching, splicing, mitring, welding, riveting, bolting, machining ends and bearings, delivery, unloading, handling, assembling, hoisting, erecting, fitting and fixing in position, bedding, filling in solid, polishing and pointing including necessary lugs or other attachment.
c) Provision of all necessary construction equipment, temporary
bracing supports and the like required for erection, providing samples and tests required by the specification, the inspection of welds including the use of any special radio-graphic techniques.
d) Protection such as wrapping finished work with paper, coating with
grease or carrying out such other protective measures as may be required and removing and cleaning on completion.
e) Nuts and any type of washer which may be required.
f) Preparation of shop Drawings.
Deduction 8.2 No deduction shall be made for drillings, holes, notchings, splay cuts and
the like. Measurement
8.3 Weights stated shall be net theoretical weights. 8.4 Steel sections and plates in connections or fitted stiffeners, column cap
and base plates, rigid frame bases and butt plates, purlins, girts, eaves, fascias and similar cleats or brackets attached to trusses, lattice girders and open web joists and plates, and similar items shall be weighted at net dimensions.
8.5 Irregular, including circular shaped plates shall be weighted at the
smallest size rectangles from which they can be cut; regular and triangular shaped plates shall be weighted at net dimensions.
Page 15 of 100
PARTICULAR PREAMBLES TO VARIOUS TRADES 8.0 STRUCTURAL STEELWORK AND METALWORK (CONT’D) 8.6 Half or other parts of steel sections in connections shall be weighted at
half the weight of the section from which they have been cut when equal to or less than half the section and at the full weight of the section from which they have been cut when greater than half the section.
9.0 WALL AND CEILING FINISHES
Rate 9.1 Rates for each item shall be deemed to include the provision of keys to
receive finishes, all temporary rules, temporary grounds, temporary screeds and the like, cramps, dowels, ties, special metal supporting brackets and the like, cutting holes, notching and the like, masking, labour to internal angles other than coved angles, making good around pipes, sanitary fixtures and the like, work in narrow widths and small quantities, joints between different types of work, joints between new and old work, internal angles, fair edges, rounded or chamfered edges or angles, quirks, grooves, V-joints, groin points and other intersections of curved surfaces, rounded coves and external angles not exceeding 25mm radius, necessary UPVC trimming pieces, mitres, stops and the like on cornices, mouldings, architraves, coves, skirtings, gutters, strings and all making good and any other sundry items of a like nature.
9.2 Rates for each item shall also be deemed to include protecting surfaces
from the weather or building operations. 9.3 Rates for each item of wall tiling shall be held to include for narrow widths
and small quantities, fittings around air bricks, pipes and the like and any other sundry items.
9.4 Rates for each item of terrazzo shall be held to include for narrow widths
and small quantities, and for all temporary rules, internal angles, arises, joints between different types of terrazzo, quirks and all making good and any other sundry items of a like nature on in-situ terrazzo, fitting around air bricks, pipes and the like and any other sundry items of a like nature on precast terrazzo.
Deduction
9.5 No deduction shall be made for openings of 0.50 square metre or less.
Measurement 9.6 In the measurement of plastering, no deduction shall be made for casings
for pipes under 300mm wide or angles which are finished in a different material if these do not exceed 100mm girth.
Page 16 of 100
PARTICULAR PREAMBLES TO VARIOUS TRADES 9.0 WALL AND CEILING FINISHES (CONT’D) 9.7 Measurement of ceilings shall include sides and soffits of beams. 9.8 "Within the building" shall mean surfaces within the internal of
buildings/flats, corridors, staircases and the like which normally do not entail scaffolding or mechanical cradles to carry out the works.
9.9 "External face of building" shall mean surfaces such as gable end walls,
front/back external walls and any other surfaces which are constantly exposed to weather and/or which normally require the use of scaffolding or mechanical cradles to carry out the work.
9.10 Work shall be deemed to be executed when scaffolding has been
provided during the course of construction. Should scaffolding be required separately just to execute the work, it would be paid as an extra item.
10.0 SANITARY, WATER AND GAS INSTALLATION
Description 10.1 The description of each item of pipework shall be deemed to include:-
a) All short lengths, joints in the running lengths, joints to all branches, tees, sockets, sleeves, connectors, backnuts, nipples, standard pipe framings or supporting clips, saddles, fastening brackets, holderbats, straps and the like.
b) Giving notices.
c) Complying with all requirements of the relevant authorities, paying
fees and the like in connection with the installations and preparing and submitting Drawings for approval if required.
Measurement 10.2 Where an item is described as “Add to last item for each additional
150mm depth”, the difference of any depth less than 150mm shall be paid based on 150mm depth.
11.0 GLAZING
Rate 11.1 Rates for each item of glazier shall be held to include for cutting and
rounded edges, fixing panel pins, clips, brass screws and cup, neoprene strips, silicone sealants and the like and leaving the glass clean on completion
Page 17 of 100
PARTICULAR PREAMBLES TO VARIOUS TRADES 12.0 PAINTING AND DECORATING
Rate 12.1 Rates for each item of painting shall be held to include for all necessary
preparation of surfaces including cleaning off, knotting, stopping and sandpapering woodwork, wirebrushing metal and leaving all surfaces free from dust, rust, grease and oil before painting, narrow widths, etc.
12.2 All items in this section shall be deemed to include for multi-coloured
works.
Deduction 12.3 No deduction shall be made for openings of 0.50 m2 or less. 12.4 Work shall be deemed to be executed when scaffolding has been provided
during the course of construction. Should scaffolding be required separately just to execute the work, it would be paid as an extra item.
13.0 TURFING AND TREE-PLANTING & LANDSCAPING WORKS
Definition of Approved Soil Mixture 13.1 Approved soil mixture shall be three parts topsoil with one part of soil
conditioner and 1 kg per m3 of granular fertilizer NPK (15:15:6.4) or 4:2:1 subsoil, unwashed sand and soil conditioner with 1 kg per m3 of granular fertilizer NPK (15:15:6.4). Measurement
13.2 The measurement of girths of the trees shall be at a height of 1.0 metre above ground.
13.3 Rates
The rate for cutting down trees shall be deemed to include for grubbing up roots and filling of voids after removal of tree roots.
13.4 The rate of each item of turfing and planting shall be deemed to include
for watering, weeding, fertilizing, cutting, settlement, re-seeding and maintenance during the “Maintenance Period” as specified.
Page 18 of 100
PARTICULAR PREAMBLES TO VARIOUS TRADES 14.0 DAYWORK
Rate 14.1 Rates shall be applicable in respect of all work executed on a daywork
basis. During the continuance of such work, the Contractor shall keep proper records of the names, occupations and working hours of all workmen employed for such work and the quantities and descriptions of all materials and construction equipment employed. Such records, receipts or vouchers must be verified by the Superintending Officer or the Superintending Officer's Representative before payment can be effected.
Page 19 of 100
HOUSING AND DEVELOPMENT BOARDSTANDARD SCHEDULE OF RATES FOR BUILDING WORKS (JUL 2013)
S/N DESCRIPTION UNIT RATE($) CODE
EXCAVATION
Excavation oversite commencing from ground levelin ordinary ground, including forming of surfaces andremoval of surplus excavated materials within site,for the following average overall depth:
1 not exceeding 150mm deep. m² $2.20 SA001
2 exceeding 150mm but not exceeding 300mm deep. m² $3.80 SA002
3 exceeding 300mm deep. m³ $11.60 SA003
4 Excavation in Embankment commencing from reducedlevel in ordinary ground including forming of surfaces andremoval of surplus excavated materials within site.
m³ $13.30 SA007
Excavate to form Trenches for Columns, Pilecaps,Foundations, Beams, Basements, Pier Holes etc inordinary ground including forming of bottom,necessary planking and strutting, part return, fill andram, and remainder get out and deposit on site asdirected in stages of the following depth:
5 not exceeding 2.00m deep. m³ $22.50 SA008
6 exceeding 2.00m but not exceeding 4.00m deep. m³ $24.10 SA009
7 exceeding 4.00m but not exceeding 6.00m deep. m³ $27.40 SA010
8 exceeding 6.00m but not exceeding 8.00m deep. m³ $30.70 SA042
Excavation for HARD GROUND where blasting willnot be permitted HARD GROUND is defined as:cemented sand, shale, decomposed rock or othermaterial with Standard Penetration Values notexceeding 70 blows per 30cm and bulk density notexceeding 2100kg/m3 and can be excavated by heavymachinery with a maximum breakout force of13,000kg such as Caterpillar 977L or its equivalent:
9 not exceeding 2.00m deep. m³ $34.60 SA012
10 exceeding 2.00m but not exceeding 4.00m deep. m³ $39.20 SA013
11 exceeding 4.00m but not exceeding 6.00m deep. m³ $46.00 SA014
Page 20 of 100
HOUSING AND DEVELOPMENT BOARDSTANDARD SCHEDULE OF RATES FOR BUILDING WORKS (JUL 2013)
S/N DESCRIPTION UNIT RATE($) CODE
EXCAVATION (CONT'D)
Excavate to form trenches for drain lines in ordinaryground including forming of bottom, necessaryplanking and strutting, get out and deposit on site asdirected and backfill excavated trench with granitedust/fines in stages of the following depth:
12 not exceeding 2.00m deep. m³ $43.70 SA034
13 exceeding 2.00m but not exceeding 4.00m deep. m³ $44.70 SA035
Excavate to form trenches for service pipes, cablecrossings, etc. in ordinary ground including formingbottom and get out, deposit on site as directed andbackfill trench in stages of the following depths:
14 not exceeding 2.00m deep with granular materials. m³ $40.20 SA038
15 exceeding 2.00m but not exceeding 4.00m deep with ditto.
m³ $40.10 SA039
16 not exceeding 2.00m deep with selected excavated material.
m³ $16.70 SA036
17 exceeding 2.00m but not exceeding 4.00m deep with ditto.
m³ $16.50 SA040
18 not exceeding 2.00m deep with selected imported earth.
m³ $26.10 SA037
19 exceeding 2.00m but not exceeding 4.00m deep with ditto.
m³ $26.00 SA041
20 CART AWAY excavated materials off site and deposit atthe Contractor's own dumping ground.
m³ $11.90 SA016
21 Dry approved earth filling obtained from outside sourceand fill in layers of 300mm thick; including labour forspreading, trimming and consolidating to form earthmounds or to form levels outside buildings and/or underfloor slabs, etc as specified.
m³ $14.90 SA017
22 Selected excavated material obtained within the site andused as filling to make up level including consolidation.
m³ $14.80 SA018
Page 21 of 100
HOUSING AND DEVELOPMENT BOARDSTANDARD SCHEDULE OF RATES FOR BUILDING WORKS (JUL 2013)
S/N DESCRIPTION UNIT RATE($) CODE
EXCAVATION (CONT'D)
23 80mm diameter (minimum) bakau piles as roller supports. m $1.80 SA033
24 Unwashed sand including spreading, levelling andconsolidating.
m³ $64.50 SA020
25 Hardcore in beds, comprising of clean brokenbricks/concrete, deposit, spread, levelled, mechanicallyconsolidated and including 25mm thick sand or granitedust blinding/topping.
m³ $26.20 SA024
26 Granite dust, spread, level and consolidate. m³ $53.10 SA025
27 Pre-treatment of soil for the protection of building againstsubterranean termites with approved chemicals includinga layer of black polythene sheets on top of the treatedarea (treated/untreated area shall be measured flat onplan up to the perimeter of the building line excludingapron areas - rate inclusive of the provision of a 5-yearwarranty).
m² $12.20 SA027
28 Supply and delivery of Grade 43 steel sheet piles for useas temporary shoring to retain the sides of excavation inapproved section and lengths.
ton $171.30 SA028
29 Driving Grade 43 steel sheet piles including the provisionof all labour, Construction equipment (providing,assembling and subsequent dismantling of pilingequipment measured separately), tools and everythingnecessary for the installation as specified.
ton $379.50 SA029
30 Extracting, recovering and stacking Grade 43 steel sheetpiles including the provision of all labour, tools (providing,assembling and subsequent dismantling of pilingequipment measured separately), and everythingnecessary for the execution as specified.
ton $253.00 SA030
31 Grade 43 steel sheet piles left in permanently includingthe provision of all labours, tools (providing, assemblingand subsequent dismantling of piling equipmentmeasured separately), and everything necessary for theinstallation as specified.
ton $1,847.50 SA031
32 Providing and assembling of necessary piling equipmentto drive/extract Grade 43 steel sheet piles of any sizeincluding all necessary tools and appliances, subsequentdismantling and removal on completion of the work onsite.
item $8,159.30 SA032
33 Approximately 16mm nominal internal diameter hollowUPVC pipe with a prelaid 3mm diameter wire inside theUPVC pipe within each cast in-situ pile.
m $2.00 SA043
Page 22 of 100
HOUSING AND DEVELOPMENT BOARDSTANDARD SCHEDULE OF RATES FOR BUILDING WORKS (JUL 2013)
S/N DESCRIPTION UNIT RATE($) CODE
CONCRETE WORK
Mass/lean concrete to underside of foundations,ground beams, floor slabs, apron slabs, etcirrespective of thickness as specified:
34 Concrete (1:3:6). m³ $142.60 SB003
35 Concrete (1:2:4). m³ $145.00 SB002
Reinforced Concrete in foundations, ground beams,column stumps, ground floor slabs, apron slabs etcincluding working around rod or fabric reinforcementbelow ground floor level as specified (reinforcementmeasured separately):
36 Grade 20. m³ $149.30 SB004
37 Grade 25. m³ $151.60 SB006
38 Grade 30. m³ $156.10 SB008
39 Grade 35. m³ $158.50 SB111
40 Grade 40. m³ $162.10 SB113
41 Grade 45. m³ $166.80 SB116
42 Grade 50. m³ $172.80 SB118
43 Extra over grade 40 reinforced concrete for the provisionof precast pilecap formwork panels including fabricationand all necessary tie bars and clamps.
m2 $50.00 SB367
Reinforced Concrete to suspended slabs, beams,columns, staircases, walls, etc including workingaround rod or fabric reinforcement above groundfloor level as specified (reinforcement measuredseparately):
44 Grade 20. m³ $156.90 SB005
45 Grade 25. m³ $159.20 SB007
46 Grade 30. m³ $163.70 SB009
47 Grade 35. m³ $166.10 SB112
Page 23 of 100
HOUSING AND DEVELOPMENT BOARDSTANDARD SCHEDULE OF RATES FOR BUILDING WORKS (JUL 2013)
S/N DESCRIPTION UNIT RATE($) CODE
CONCRETE WORK (CONT'D)
Reinforced Concrete to suspended slabs, beams,columns, staircases, walls, etc including workingaround rod or fabric reinforcement above groundfloor level as specified (reinforcement measuredseparately) (Cont'd):
48 Grade 40. m³ $169.80 SB114
49 Grade 45. m³ $174.50 SB117
50 Grade 50. m³ $180.50 SB119
51 Approved damp proof membrane Type B (felt fibre base)to underside of reinforced concrete slab includingprovision for laps and preparation of surface as specified.
m² $10.30 SB011
52 Liquid-applied flexible cementitious or water-basedWaterproofing Membrane to bath/wc/kitchen floorsincluding upturns on pipes and walls as specified(Measured flat-on-plan and no adjustment to be made forvoids occupied by pipes).
m² $12.50 SB359
Mild Steel Rod Reinforcement, fabricated and laid infoundations, beds, suspended slab, walls, columns,beams, staircases etc, and including labour forforming stirrups, links etc:
53 6mm diameter. kg $2.50 SB022
54 8mm diameter. kg $2.40 SB154
55 10mm diameter. kg $2.20 SB023
56 13mm diameter. kg $2.10 SB024
57 16mm diameter. kg $2.10 SB025
58 20mm diameter. kg $1.90 SB026
59 25mm diameter. kg $1.90 SB028
Page 24 of 100
HOUSING AND DEVELOPMENT BOARDSTANDARD SCHEDULE OF RATES FOR BUILDING WORKS (JUL 2013)
S/N DESCRIPTION UNIT RATE($) CODE
CONCRETE WORK (CONT'D)
Deformed High Tensile Steel Rod Reinforcement,fabricated and laid in foundations, beds, suspendedslabs, walls, columns, beams, staircases etc, andincluding labour for forming stirrups, links etc:
60 6mm diameter. kg $2.60 SB155
61 8mm diameter. kg $2.00 SB157
62 10mm diameter. kg $2.00 SB031
63 13mm diameter. kg $2.00 SB032
64 16mm diameter. kg $2.10 SB033
65 20mm diameter. kg $2.00 SB034
66 22mm diameter. kg $2.00 SB035
67 25mm diameter. kg $2.00 SB036
68 28mm diameter. kg $2.00 SB037
69 32mm diameter. kg $2.00 SB038
70 Extra over steel rod reinforcement for galvanising. kg $0.70 SB039
Welded steel fabric reinforcement well lapped andtied at joints (measured nett) :
71 A5. m² $4.00 SB040
72 A6. m² $5.00 SB041
73 A7. m² $6.50 SB042
74 A8. m² $8.00 SB043
Page 25 of 100
HOUSING AND DEVELOPMENT BOARDSTANDARD SCHEDULE OF RATES FOR BUILDING WORKS (JUL 2013)
S/N DESCRIPTION UNIT RATE($) CODE
CONCRETE WORK (CONT'D)
Welded steel fabric reinforcement well lapped andtied at joints (measured nett) (Cont'd):
75 A10. m² $12.20 SB145
76 A12. m² $17.10 SB284
77 B5. m² $6.90 SB146
78 B6. m² $8.00 SB147
79 B7. m² $9.00 SB148
80 B8. m² $11.80 SB149
81 B8A. m² $7.00 SB352
82 B9. m² $13.90 SB229
83 B10. m² $15.80 SB150
84 B12. m² $20.80 SB151
85 B13. m² $26.10 SB350
86 D5. m² $7.20 SB346
87 D6. m² $9.30 SB048
88 D7. m² $12.00 SB049
89 D8. m² $15.40 SB124
90 D9. m² $19.20 SB230
91 D10. m² $23.80 SB231
92 D11. m² $28.50 SB347
93 D12. m² $34.00 SB348
94 D13. m² $39.90 SB349
95 Dowel Mesh (DM). m² $9.60 SB358
Page 26 of 100
HOUSING AND DEVELOPMENT BOARDSTANDARD SCHEDULE OF RATES FOR BUILDING WORKS (JUL 2013)
S/N DESCRIPTION UNIT RATE($) CODE
CONCRETE WORK (CONT'D)
Prefabricated pilecap mesh reinforcement:
96 Type H1320 0840. m² $13.70 SB326
97 Type H1315 1315. m² $27.00 SB354
98 Type H1310 1310. m² $38.00 SB324
99 Type H1310 1610. m² $49.70 SB325
100 Type 2H1310 1320. m² $48.10 SB327
101 Type 2H1315 1315. m² $39.00 SB331
102 Type 2H1310 0840. m² $40.80 SB330
103 Type 2H1315 0840. m² $28.70 SB355
104 Type 2H1310 1310. m² $57.10 SB328
105 Type 2H1310 1610. m² $68.10 SB329
106 ECC mesh H1320 (Type 1) m $12.70 SB363
107 ECC mesh H1320 (Type 2) m $13.90 SB364
108 Prefabricated pilecap link mesh reinforcement. m² $21.40 SB332
Prefabricated beam stirrup cage reinforcement:
109 Reference no. S07. m² $18.50 SB280
110 Reference no. S10. m² $15.10 SB167
111 Reference no. S15. m² $11.70 SB168
112 Reference no. S20. m² $10.00 SB169
113 Reference no. S25. m² $9.00 SB170
114 Reference no. S130. m² $22.20 SB281
115 Reference no. S137. m² $28.00 SB333
116 Reference no. 2S130 (twin). m² $39.50 SB334
117 Prefabricated beam capping link reinforcement no R10-300.
m² $20.40 SB288
Page 27 of 100
HOUSING AND DEVELOPMENT BOARDSTANDARD SCHEDULE OF RATES FOR BUILDING WORKS (JUL 2013)
S/N DESCRIPTION UNIT RATE($) CODE
CONCRETE WORK (CONT'D)
Prefabricated wall mesh reinforcement:
118 Type H1320 0820. m² $13.00 SB356
119 Type H1310 0820. m² $21.60 SB357
Prefabricated column link cage of R6 reinforcement(Reference no L36, L36A, L36B, L46, L46A, L46B, L56,L56A, L56B) :
120 at 100mm spacing. m² $8.30 SB306
121 at 150mm spacing. m² $7.00 SB307
122 at 175mm spacing. m² $6.60 SB337
123 at 200mm spacing. m² $6.40 SB308
Prefabricated column link cage of R8 reinforcement(Reference no L38, L38A, L38B, L48, L48A, L48B, L58,L58A, L58B) :
124 at 100mm spacing. m² $11.50 SB309
125 at 150mm spacing. m² $9.10 SB310
126 at 200mm spacing. m² $7.90 SB311
127 at 250mm spacing. m² $7.20 SB338
128 Timber formwork to surfaces of concrete foundations,column stumps, ground beams, ground floor slabs, etc.
m² $19.70 SB110
129 Timber formwork to surfaces of concrete columns, walls,suspended slabs, stairs, canopies, beams, lintols etc.
m² $29.00 SB062
130 Timber formwork to produce a good off-form finish tosurfaces of concrete columns, walls, slabs, beams,staircases, canopies, lintols etc. as specified.
m² $37.00 SB274
131 Formwork of approved materials to produce a good off-form finish to curved surfaces of concrete columns, walls,slabs, beams, staircases, canopies, lintols, etc. asspecified.
m² $46.50 SB275
132 LABOUR ONLY for preparing, cleaning, assembling,erecting and dismantling of metal formwork of any typesto surfaces of concrete columns, walls, suspended slabs,staircases, canopies, beams etc.
m² $29.80 SB064
Page 28 of 100
HOUSING AND DEVELOPMENT BOARDSTANDARD SCHEDULE OF RATES FOR BUILDING WORKS (JUL 2013)
S/N DESCRIPTION UNIT RATE($) CODE
CONCRETE WORK (CONT'D)
PRECAST CONCRETE in sills, lintols, slabs, etcincluding moulds, hoisting and fixing in position:
133 Grade 25 with reinforcement. m³ $571.20 SB158
134 Grade 25 without reinforcement. m³ $317.40 SB159
135 Grade 30 with reinforcement. m³ $575.70 SB161
136 Grade 30 without reinforcement. m³ $321.90 SB162
137 Grade 40 with reinforcement. m³ $581.70 SB339
138 Grade 40 without reinforcement. m³ $327.90 SB340
139 Precast concrete Grade 40 in footing/stump includingmoulds, hoisting and placing in position (reinforcementmeasured separately).
m³ $286.80 SB380
140 Hacking through reinforced concrete floors or walls (anythickness) to form opening including making good andremove debris from site.
m³ $749.50 SB068
141 Breaking up existing reinforced concrete structuresincluding removing debris off the site.
m³ $138.70 SB164
142 Breaking up of existing mass concrete structuresincluding removing debris off the site.
m³ $111.10 SB165
143 One layer of approved epoxy concrete bonding agent tohacked concrete surfaces before concreting.
m² $26.70 SB166
Concrete in small quantities not exceeding 0.15m³including all necessary formwork:
144 Grade 20. m³ $395.50 SB069
145 Grade 25. m³ $399.00 SB160
146 Grade 30. m³ $405.70 SB163
147 Grade 40. m³ $414.80 SB317
Page 29 of 100
HOUSING AND DEVELOPMENT BOARDSTANDARD SCHEDULE OF RATES FOR BUILDING WORKS (JUL 2013)
S/N DESCRIPTION UNIT RATE($) CODE
CONCRETE WORK (CONT'D)
Coring of holes through concrete structure includingremoval of debris off site:
148 25 to 31mm diameter x 100 to 200mm depth. no $55.70 SB190
149 25 to 31mm diameter x 201 to 300mm depth. no $65.30 SB193
150 25 to 31mm to diameter x 301 to 400mm depth. no $77.50 SB194
151 32 to 49mm diameter x 100 to 200mm depth. no $44.60 SB300
152 32 to 49mm diameter x 201 to 300mm depth. no $50.00 SB301
153 32 t0 49mm diameter x 301 to 400mm depth. no $70.10 SB302
154 50 to 74mm diameter x 100 to 200mm depth. no $53.70 SB195
155 50 to 74mm diameter x 201 to 300mm depth. no $66.30 SB198
156 50 to 74mm diameter x 301 to 400mm depth. no $83.10 SB199
157 75 to 99mm diameter x 100 to 200mm depth. no $60.70 SB200
158 75 to 99mm diameter x 201 to 300mm depth. no $74.10 SB203
159 75 to 99mm diameter x 301 to 400mm depth. no $92.50 SB204
160 100 to 149mm diameter x 100 to 200mm depth. no $68.30 SB205
161 100 to 149mm diameter x 201 to 300mm depth. no $91.70 SB208
162 100 to 149mm diameter x 301 to 400mm depth. no $109.50 SB209
163 150 to 199mm diameter x 201 to 300mm depth. no $124.00 SB213
164 150 to 199mm diameter x 301 to 400mm depth. no $154.20 SB214
165 200 to 249mm diameter x 100 to 200mm depth. no $126.40 SB215
166 200 to 249mm diameter x 201 to 300mm depth. no $156.60 SB218
167 200 to 249mm diameter x 301 to 400mm depth. no $199.40 SB219
168 250 to 299mm diameter x 100 to 200mm depth. no $147.60 SB319
169 250 to 299mm diameter x 201 to 300mm depth. no $197.40 SB320
170 250 to 299mm diameter x 301 to 400mm depth. no $257.30 SB321
Page 30 of 100
HOUSING AND DEVELOPMENT BOARDSTANDARD SCHEDULE OF RATES FOR BUILDING WORKS (JUL 2013)
S/N DESCRIPTION UNIT RATE($) CODE
CONCRETE WORK (CONT'D)
Coring of holes through concrete structure includingremoval of debris off site (Cont'd):
171 300mm diameter x 100 to 200mm depth. no $188.10 SB220
172 300mm diameter x 201 to 300mm depth. no $223.20 SB223
173 300mm diameter x 301 to 400mm depth. no $285.00 SB224
Forming bituminous expansion joint in concretefloors including all necessary formwork andbituminous seal:
174 13mm wide x 75mm deep. m $5.30 SB316
175 25mm wide x 100mm deep. m $11.80 SB096
176 Forming of 25mm wide expansion joint in cavity with foamplastic infill as specified.
m² $2.50 SB120
177 Forming of surface channel 150mm wide x 50mm deepon concrete floor slab to fall.
m $2.50 SB360
225mm wide (internal) Reinforced ConcreteSURFACE DRAIN constructed with 100mm thicksides, 100mm thick bottom and all exposed sides,bottom and arrises rendered smooth in cementmortar including all necessary excavation, formworkand lean concrete laid to fall as directed:
178 Grade 25 not exceeding 400mm deep (average) to invert and reinforced with B6 WSF reinforcement.
m $102.70 SB099
179 Add to LAST ITEM for the increase in stages of 100mm deep.
m $19.70 SB100
180 Grade 40 not exceeding 400mm deep (average) to invert and reinforced with A7 WSF reinforcement.
m $102.20 SB314
181 Add to LAST ITEM for the increase in stages of 100mm deep.
m $19.70 SB315
182 Extra over 225mm wide reinforced concrete drain forPRECAST CONCRETE INVERT.
m $2.10 SB105
Page 31 of 100
HOUSING AND DEVELOPMENT BOARDSTANDARD SCHEDULE OF RATES FOR BUILDING WORKS (JUL 2013)
S/N DESCRIPTION UNIT RATE($) CODE
CONCRETE WORK (CONT'D)
183 225mm wide (internal) grade 40 precast concrete housedrain not exceeding 400mm deep (average) to invert with100mm thick sides and bottom complete withreinforcement and topping up sides with in-situ concreteincluding all necessary jointing, excavation, formwork andlean concrete and laid to falls as specified.
m $67.50 SB365
184 Add to LAST ITEM for the increase in stages of 100mmdeep.
m $4.90 SB366
185 315mm diameter UPVC pipe conforming to SS272 forconcealed drain outlet with Grade 30 concrete bed andreinforced with WSF B5 including formwork and leanconcrete (excavation measured separately).
m $91.70 SB371
Precast concrete (Grade 40) components includingall reinforcement, moulds, formwork stacking,hoisting, setting, labour and materials for jointing,testing accessories and protection, atc as specified:
186 100mm thick normal weight partition wall m² $99.60 SB130
187 90mm thick normal weight partition wall m² $93.30 SB131
188 70-90mm thick prestressed plank m² $75.20 SB381
189 70-90mm thick non-pretressed plank m² $101.00 SB383
190 250mm thick gable end wall m² $277.00 SB134
191 100-120mm facade wall without beam m² $140.60 SB132
192 Precast beam m³ $1,348.00 SB372
193 75mm thick ferrolite partition wall (designed mix asspecified)
m² $64.50 SB384
Page 32 of 100
HOUSING AND DEVELOPMENT BOARDSTANDARD SCHEDULE OF RATES FOR BUILDING WORKS (JUL 2013)
S/N DESCRIPTION UNIT RATE($) CODE
BRICKWORK AND BLOCKWORK
Brickwork in standard common bricks (size 215 x102.5 x 65mm) laid in prepacked mortar as specifiedwith 10mm joints raked 10mm deep or flush pointedas work proceeds:
194 Generally. m³ $320.60 SC005
195 One brick thick wall. m² $77.50 SC006
196 Half brick thick wall reinforced with expanded metal brickwork reinforcement.
m² $39.60 SC007
197 Half brick thick wall built honeycomb. m² $30.50 SC008
Common brickwall using modular bricks laid inprepacked mortar as specified with 10mm jointsraked 10mm deep or flush pointed as the workproceeds:
198 90mm thick reinforced with expanded metal brickwork reinforcement.
m² $34.60 SC016
199 190mm thick. m² $70.80 SC015
200 290mm thick. m² $98.20 SC044
Red facing brickwall using modular bricks laid inprepacked mortar as specified with 10mm jointsraked 10mm deep or flush pointed as the workproceeds:
201 90mm thick reinforced with expanded metal brickwork reinforcement.
m² $78.70 SC055
202 190mm thick. m² $152.10 SC062
203 Extra over common modular brickwork for using redfacing bricks to one face of the brickwall (applicable tobrickwall of thickness 190mm and above).
m² $49.80 SC017
Page 33 of 100
HOUSING AND DEVELOPMENT BOARDSTANDARD SCHEDULE OF RATES FOR BUILDING WORKS (JUL 2013)
S/N DESCRIPTION UNIT RATE($) CODE
BRICKWORK AND BLOCKWORK (CONT'D)
Glass block wall laid in premix mortar complete withpanel reinforcing, panel anchors, expansion strips,etc as specified:
204 146 x 146 x 98mm thick "Pittsburgh Corning" transparent/non-transparent glass blocks.
m² $453.70 SC047
205 Extra over item SC047 for using colour coated edge blocks.
m² $41.60 SC048
206 197 x 197 x 98mm thick "Pittsburgh Corning" transparent/non-transparent glass blocks.
m² $303.90 SC045
207 Extra over item SC045 for using colour coated edge blocks.
m² $23.40 SC046
208 145 x 145 x 95mm thick "NEG" transparent/non-transparent glass blocks.
m² $487.40 SC052
209 190 x 190 x 95mm thick "NEG" transparent/non-transparent glass blocks.
m² $324.10 SC049
Solid block wall laid in prepacked mortar asspecified:
210 70mm thick wall using 190 x 90 x 70mm solid blocks. m² $30.40 SC027
211 90mm thick wall using 190/290 x 90 x 90mm solid blocks.
m² $30.00 SC028
212 190mm thick wall using 190 x 90 x 90mm solid blocks. m² $58.70 SC030
213 Breaking up blockwork or brickwork in cement mortarincluding plaster (measured in gross thickness) andremoving debris off site.
m³ $45.20 SC031
214 Approved horizontal damp proof course Type B (felt fibrebase) to brick/block walls bedded in prepacked mortar asspecified.
m² $16.10 SC035
Page 34 of 100
HOUSING AND DEVELOPMENT BOARDSTANDARD SCHEDULE OF RATES FOR BUILDING WORKS (JUL 2013)
S/N DESCRIPTION UNIT RATE($) CODE
FLOOR FINISHES
215 Hack existing concrete surface to form keys and washclean to receive finishing.
m² $3.00 SD001
216 Extra over concrete slab for trowelling surface of floor orroof slab.
m² $1.10 SD002
217 Extra over concrete slab for compacting and trowellingsmooth surface of reinforced concrete floor slab by powertrowel.
m² $2.90 SD003
218 Extra over concrete floor or screed for the application ofapproved non-metallic hardener with power trowelledfinish including spraying a coat of approved curing agentonto the finished surface as specified.
m² $17.30 SD082
219 Extra over concrete ramp for the application of approvednon-metallic hardener with power trowelled finishincluding spraying a coat of approved curing agent ontothe finished surface and forming ring indentations asspecified (measured flat on plan).
m² $23.10 SD083
Forming 10mm wide groove lines on surfaces ofconcrete ramp:
220 At not more than 150mm apart. m² $7.20 SD104
221 Exceeding 150mm but not more than 300mm apart. m² $3.20 SD109
222 Matt finished polymer surface coating of approvedcolours over roof slab as specified. (rate inclusive of theprovision of a 5-year warranty).
m² $31.10 SD103
223 20-30mm thick non-shrink cement rendering to concretesurfaces trowelled to a smooth finish.
m² $28.70 SD105
224 10mm thick prepacked waterproof screed for kitchen,bath and WC floors as specified.
m² $8.00 SD110
225 ADD to (or deduct from) ITEM SD110 for each 5mmthickness over (or under) 10mm.
m² $2.40 SD112
226 20mm thick prepacked screed to floor trowelled to asmooth finish.
m² $11.60 SD004
227 ADD to (or deduct from) ITEM SD004 for each 5mmthickness over (or under) 20mm.
m² $2.40 SD005
Page 35 of 100
HOUSING AND DEVELOPMENT BOARDSTANDARD SCHEDULE OF RATES FOR BUILDING WORKS (JUL 2013)
S/N DESCRIPTION UNIT RATE($) CODE
FLOOR FINISHES (CONT'D)
20mm thick prepacked screed to skirting, treads,risers, curbs and returns etc and trowelled to asmooth finish including coved and rounded angles:
228 Not exceeding 150mm in height/width. m $6.50 SD006
229 Exceeding 150mm but not exceeding 300mm in height/width.
m $10.30 SD007
230 ADD to (or deduct from) ITEM SD006 for each 5mm thickness over (or under) 20mm.
m $1.30 SD008
231 ADD to (or deduct from) ITEM SD007 for each 5mm thickness over (or under) 20mm.
m $2.10 SD009
232 20mm thick prepacked screed to receive floor finishes. m² $9.50 SD087
233 ADD to (or deduct from) ITEM SD087 for each 5mmthickness over (or under) 20mm.
m² $2.00 SD088
234 25mm thick Concrete Screed (Grade 25) with 10mmmaximum size aggregate to concrete floor surfacesfinished with steel trowelling including all necessarylabour and materials for preparation of substrate'ssurface to receive screed as specified.
m² $10.60 SD010
235 ADD to (or deduct from) ITEM SD010 for each 5mmthickness over (or under) 25mm.
m² $1.70 SD011
25mm thick Concrete Screed (Grade 25) with 10mmmaximum size aggregate to skirting, treads, risers,curbs and return etc, trowelled to a smooth finishincluding coved and rounded angles and allnecessary labour and materials for preparation ofsubstrate's surface as specified:
236 Not exceeding 150mm in height/width. m $8.00 SD012
237 Exceeding 150mm but not exceeding 300mm in height/width.
m $11.50 SD013
238 ADD to (or deduct from) ITEM SD012 for each 5mm thickness over (or under) 25mm .
m $1.20 SD014
239 ADD to (or deduct from) ITEM SD013 for each 5mm thickness over (or under) 25mm.
m $1.90 SD015
Page 36 of 100
HOUSING AND DEVELOPMENT BOARDSTANDARD SCHEDULE OF RATES FOR BUILDING WORKS (JUL 2013)
S/N DESCRIPTION UNIT RATE($) CODE
FLOOR FINISHES (CONT'D)
240 20mm thick granolithic paving consisting of cement, sandand granite chippings (1:1:2) to floor and trowelled to asmooth finish.
m² $12.20 SD019
241 ADD to (or deduct from) ITEM SD019 for each 5mmthickness of granolithic layer over (or under) 20mm.
m² $2.40 SD020
20mm thick granolithic consisting of cement, sandand granite chippings (1:1:2) to skirtings, treads,risers, curbs and returns etc and trowelled to asmooth surface including coved and rounded angles:
242 Not exceeding 150mm in height/width. m $7.30 SD021
243 Exceeding 150mm but not exceeding 300mm in height/width.
m $9.90 SD022
244 ADD to (or deduct from) ITEM SD021 for each 5mm thickness over (or under) 20mm.
m $1.30 SD023
245 ADD to (or deduct from) ITEM SD022 for each 5mm thickness over (or under) 20mm.
m $1.90 SD024
246 Extra over granolithic paving (irrespective of thickness)for exposed aggregate finish.
m² $10.00 SD025
247 Extra over granolithic paving (irrespective of thickness)for exposed aggregate finish all as in ITEM SD025 but forskirting etc not exceeding 150mm in height/width.
m $2.60 SD026
248 Extra over granolithic paving (irrespective of thickness)for exposed aggregate finish all as in ITEM SD025 but forskirting etc exceeding 150mm but not exceeding 300mmin height/width.
m $4.50 SD027
249 50mm thick cement rendering to floor slab including20mm thk granolithic paving consisting of cement, sandand granite chippings (1:1:1) with concrete hardenertrowelled to a smooth finish.
m² $32.30 SD116
Page 37 of 100
HOUSING AND DEVELOPMENT BOARDSTANDARD SCHEDULE OF RATES FOR BUILDING WORKS (JUL 2013)
S/N DESCRIPTION UNIT RATE($) CODE
FLOOR FINISHES (CONT'D)
8mm thick quarry tiles laid and bedded on andincluding necessary prepacked base screed asspecified:
250 100 x 100mm tiles. m² $48.00 SD043
251 200 x 100mm tiles. m² $45.60 SD044
252 Brick-on-edge paving using red facing modular bricks laidto approved pattern, jointed and pointed in prepackedmortar as specified (screed measured separately).
m² $76.20 SD047
253 190mm wide brick-on-edge curb using M211 red facingmodular bricks jointed and pointed in prepacked mortaras specified (screed measured separately).
m $22.30 SD054
254 190mm wide brick-on-edge curb/coping using M211 redfacing bullnose/splayed edge bricks jointed and pointedin prepacked mortar as specified (screed measuredseparately)
m $20.00 SD070
255 Grade C glazed ceramic floor tiles of approved colours,patterns and textures (nominal size 200 x 200 x 8mmthick), bedded on and including prepacked screed andpointing with approved coloured tile grouts as specified.
m² $49.10 SD092
Grade C glazed ceramic floor tiles of approvedcolours, patterns and textures (to match 200 x 200 x8mm thick tiling) to skirtings, treads, risers, curbs,nosing and returns, bedded on and includingprepacked screed and pointing with approvedcoloured tile grouts as specified:
256 Not exceeding 150mm in height/width. m $11.60 SD093
257 Exceeding 150mm but not exceeding 300mm in height/width.
m $18.70 SD094
Page 38 of 100
HOUSING AND DEVELOPMENT BOARDSTANDARD SCHEDULE OF RATES FOR BUILDING WORKS (JUL 2013)
S/N DESCRIPTION UNIT RATE($) CODE
FLOOR FINISHES (CONT'D)
258 Grade C glazed ceramic floor tiles of approved colours,patterns and textures (nominal size 300 x 300 x 9mmthick), bedded on and including prepacked screed andpointing with approved coloured tile grouts as specified.
m² $51.40 SD064
Grade C glazed ceramic floor tiles of approvedcolours, patterns and textures (to match 300 x 300 x9mm thick tiling) to skirtings, treads, risers, curbs,nosing and returns, bedded on and includingprepacked screed and pointing with approvedcoloured tile grouts as specified:
259 Not exceeding 150mm in height/width. m $11.20 SD065
260 Exceeding 150mm but not exceeding 300mm in height/width.
m $17.90 SD066
261 Glazed porcelain ceramic floor tiles of approved colours,patterns (nominal size 600 x 600 x 10mm thick), beddedon and including prepacked screed and pointing withapproved coloured tile grouts as specified.
m² $62.80 SD119
262 Polished porcelain ceramic floor tiles of approved colours,patterns (nominal size 600 x 600 x 10mm thick), beddedon and including prepacked screed and pointing withapproved coloured tile grouts as specified.
m² $60.90 SD120
263 Heavy duty unglazed ceramic floor tiles of approvedcolours, patterns and textures (nominal size 200 x 200 x8mm thick), bedded on and including prepacked screedand pointing with approved coloured tile grouts asspecified.
m² $56.10 SD100
Heavy duty unglazed ceramic floor tiles of approvedcolours, patterns and textures (to match 200 x 200 x8mm thick tiling) to skirtings, treads, risers, curbs,nosing and returns, bedded on and includingprepacked screed and pointing with approvedcoloured tile grouts as specified:
264 Not exceeding 150mm in height/width. m $13.10 SD101
265 Exceeding 150mm but not exceeding 300mm in height/width.
m $21.50 SD102
266 Heavy duty unglazed ceramic floor tiles of approvedcolours, patterns and textures (nominal size 300 x 300 x9mm thick), bedded on and including prepacked screedand pointing with approved coloured tile grouts asspecified.
m² $56.00 SD097
Page 39 of 100
HOUSING AND DEVELOPMENT BOARDSTANDARD SCHEDULE OF RATES FOR BUILDING WORKS (JUL 2013)
S/N DESCRIPTION UNIT RATE($) CODE
FLOOR FINISHES (CONT'D)
Heavy duty unglazed ceramic floor tiles of approvedcolours, patterns and textures (to match 300 x 300 x9mm thick tiling) to skirtings, treads, risers, curbs,nosing and returns, bedded on and includingprepacked screed and pointing with approvedcoloured tile grouts as specified:
267 Not exceeding 150mm in height/width. m $12.00 SD098
268 Exceeding 150mm but not exceeding 300mm in height/width.
m $19.40 SD099
269 Glazed ceramic round edge skirting tile 400x80x8mmthick of approved colour and textures bedded on andincluding prepacked screed and pointing with approvedcoloured tile grouts as specified.
m $14.70 SD115
270 Heavy duty structured/textured ceramic floor tile (nominalsize 300x300x9mm thick) bedded on and includingprepacked screed and pointing with approved colouredtile grouts as specified.
m2 $55.80 SD114
271 Heavy duty polished homogeneous floor tiles of approvedcolours, patterns and textures, (nominal size 400 x 400 x9mm thick), bedded on and including prepacked screedand pointing with approved coloured tile grouts asspecified.
m2 $60.30 SD111
272 Extra over ceramic floor tiles for prepacked waterproofscreed in lieu of prepacked screed.
m2 $1.10 SD113
Coloured interlocking concrete paving blocks toapproved pattern including 50mm thick compactedsand bed as specified:
273 224 x 110.5 x 80mm thick. m² $41.40 SD077
274 225 x 111 x 100mm thick. m² $42.80 SD078
275 453 x 453 x 100mm thick. m² $43.40 SD079
276 600 x 600 x 50mm thick concrete paving slab of grade 25concrete with 10mm max. aggregate jointed withprepacked mortar as specified.
m $17.10 SD080
277 20 x 25mm PVC "L" shaped Floor Strip laid to fall,secured to reinforced concrete floor slab with masonrynails at 500mm centre to centre and top of strip to beflushed with concrete screed as specified.
m $3.50 SD084
Page 40 of 100
HOUSING AND DEVELOPMENT BOARDSTANDARD SCHEDULE OF RATES FOR BUILDING WORKS (JUL 2013)
S/N DESCRIPTION UNIT RATE($) CODE
ROOFING
278 BRC 3315 to roof to support sisalation paper. m² $3.10 SE001
Woodwool slab to roof:
279 25mm thick. m² $43.30 SE005
280 50mm thick. m² $56.10 SE045
281 900 x 600 x 20mm thick ferrocement secondary roofslabs, reinforced with galvanised fine mesh to reinforcedconcrete flat roof including all necessary supportingconcrete solid blocks, labour and materials for sealing uppipes etc as specified.
m² $51.30 SE048
282 3mm thick acrylic polymer modified cementitious coatingto roof surfaces and gutter as specified.
m² $12.20 SE049
283 Panel Roofing System to roof surfaces consisting of38mm thick waterproofing cement and sand panel (1:3),50mm thick Styrofoam insulation board or other approvedand 6 coats of waterproofing membranes, 1 layer of openwoven glass membrane and a minimum of 20mm thickwaterproofing cement and sand screed (1:3) laid to fall asspecified and including all necessary materials for jointing(measured flat on plan - rate inclusive of the provision ofa 10 year warranty).
m² $65.90 SE008
284 One layer of "Parsec Thermo-brite II" double sidedreflective roof heat insulation sheet including lapping with"Parsec Thermo-brite" tape and secured to roof structureby self-drilling fasteners complete with metal washers asspecified and in accordance with Manufacturer'sinstructions.
m² $9.90 SE034
285 One layer of "Super Sisalation" double sided reflectiveroof heat insulation sheet including lapping with PPC 493reinforced aluminium foil tape and secured to roofstructure by self-drilling fasteners complete with metalwashers as specified and in accordance withManufacturer's instructions.
m² $8.70 SE035
286 One layer of "Super Brite" double sided reflective roofheat insulation sheet including lapping and secured toroof structure by self-drilling fasteners complete withmetal washers as specified and in accordance withManufacturer's instructions.
m² $8.40 SE047
Page 41 of 100
HOUSING AND DEVELOPMENT BOARDSTANDARD SCHEDULE OF RATES FOR BUILDING WORKS (JUL 2013)
S/N DESCRIPTION UNIT RATE($) CODE
ROOFING (CONT'D)
Colourbond XRW metal roofing sheets including allnecessary fixing accessories as specified (rateinclusive of the provision of a 10-year warranty):
287 0.47mm thick Lysaght Spandek m² $29.80 SE014
288 0.47mm thick Lysaght Trimdek m² $28.60 SE046
289 0.53mm thick Lysaght Kliplok m² $34.50 SE015
290 0.65mm thick Lysaght Kliplok m² $40.10 SE016
0.60mm thick custom made colourbond XRWflashings/cappings/trims to Kliplok/Spandek roofingincluding all necessary fixing accessories asspecified (rate inclusive of the provision of a 10-yearwarranty):
291 not exceeding 100mm girth. m $8.50 SE019
292 exceeding 100mm but not exceeding 200mm girth. m $11.90 SE020
293 exceeding 200mm but not exceeding 300mm girth. m $15.40 SE021
294 exceeding 300mm but not exceeding 400mm girth. m $19.00 SE022
295 exceeding 600mm but not exceeding 800mm girth. m $32.90 SE025
296 0.53mm thick Lysaght Speed Deck colorbond metalroofing including all necessary fixing accessories asspecified (rate inclusive of the provision of a 10-yearwarranty).
m² $48.60 SE012
297 Colorbond ridge capping (type A) to Lysaght Speed Deckroofing including all necessary fixing accessories asspecified (rate inclusive of the provision of a 10-yearwarranty).
m $36.30 SE013
Page 42 of 100
HOUSING AND DEVELOPMENT BOARDSTANDARD SCHEDULE OF RATES FOR BUILDING WORKS (JUL 2013)
S/N DESCRIPTION UNIT RATE($) CODE
CARPENTRY AND JOINERY
Approved calcium silicate board as ceiling boardincluding corrosion resistant countersunk screwsfixed to timber joists as specified (timber joists andpainting measured separately):
298 9mm thick. m² $17.00 SF128
299 12mm thick. m² $20.70 SF049
300 Ceiling duct for concealment of discharge pipes andfittings comprising of 9mm thick calcium silicate boardwith galvanised steel angle frames, including egg cratechrome plastic lighting diffuser with powder coatedaluminium frames as specified. (measurement based onexposed surface area of duct and painting measuredseparately).
m2 $86.50 SF204
301 9mm thick calcium silicate board as box-up forconcealment of gas pipes complete with 40 x 40 x 3mmthick galvanised steel angle frames/supports as specified(painting measured separately).
m2 $60.50 SF208
302 Approved calcium silicate board with 1-hourcompartmentation as box-up for concealment of gaspipes complete with galvanised steel angleframes/supports as specified (painting measuredseparately).
m2 $101.60 SF209
303 Extra over items SF208 and SF209 for forming 15mmdiameter ventilation holes at 300mm centres.
m $1.10 SF210
304 Sawn timber in wall plates, rafters, purlins, joists, collarsand backing pieces.
m³ $1,526.90 SF004
305 Extra over structural timber for pressure impregnationtreatment with approved wood preservative.
m³ $82.20 SF005
306 Wrot timber for BOARDS under 50mm thick and 100mmor more wide including all labour and materials for anynecessary jointings.
m³ $1,471.90 SF006
307 Wrot timber for frame, head, mullion, transome or cillworked to the required shape.
m³ $1,711.50 SF007
308 Wrot timber for hand rails not exceeding 5,000 mm² insectional area.
m $21.40 SF010
Page 43 of 100
HOUSING AND DEVELOPMENT BOARDSTANDARD SCHEDULE OF RATES FOR BUILDING WORKS (JUL 2013)
S/N DESCRIPTION UNIT RATE($) CODE
CARPENTRY AND JOINERY (CONT'D)
Wrot timber for architraves, cover fillets, etc:
309 not exceeding 500 mm² in sectional area. m $2.00 SF008
310 exceeding 500 mm² but not exceeding 1,000 mm² in sectional area.
m $2.50 SF009
Wrot timber for louvre blades:
311 not exceeding 2,000 mm² in sectional area. m $4.30 SF011
312 exceeding 2,000 mm² but not exceeding 4,000 mm² in sectional area.
m $5.40 SF012
Boarding in shelving, partitions, panellings, etcscrewed on:
313 19mm thick. m² $41.50 SF013
314 25mm thick. m² $48.40 SF014
315 Teak or other approved timber hardwood strip flooringcomprising of 70mm wide x 350-450mm long x 12mmthick tongued and grooved timber strips jointed togetherand laid to approved patterns including sanding andpolishing to approval and painting surfaces with 3 coatsvarnish as specified (cement screed measuredseparately).
m2 $91.50 SF205
316 95mm high timber skirting comprising of 95mm wide x1200mm long x 11mm thick timber strips includingsanding and polishing to approval and painting surfaceswith 3 coats varnish as specified.
m $21.70 SF206
45mm thick solid cored timber door comprising of33mm thick tongued and grooved jointed boardsfixed together with 3nos 10mm diameter bolts andfilled in both faces with 6mm thick plywood lining asspecified (door frame and ironmongery measuredseparately):
317 Single-leaf door Type DT2A, D1/D1A or ST1 for opening of 1000 x 2190mm height.
no $470.00 SF096
318 Double leaf door Type DT2B or ST2 for opening of 1500 x 2190mm height.
no $707.30 SF094
Page 44 of 100
HOUSING AND DEVELOPMENT BOARDSTANDARD SCHEDULE OF RATES FOR BUILDING WORKS (JUL 2013)
S/N DESCRIPTION UNIT RATE($) CODE
CARPENTRY AND JOINERY (CONT'D)
38mm thick single-leaf semi-cored timber flush doorwith 6mm thick plywood lining on both faces asspecified (door frame, calcium silicate panel andironmongery measured separately):
319 Type DT1B/DF1B for opening 450 x 2190mm height. no $205.90 SF164
320 Type DT1C/DF1C for opening 500 x 2190mm height. no $209.60 SF165
321 Type HT/1 or HTF/1 for opening of 380 x 2190mm height.
no $208.00 SF192
322 Type HT/2 or HTF/2 for opening of 530 x 2190mm height.
no $209.70 SF193
323 Type HT/3 or HTF/3 for opening of 780 x 2190mm height.
no $235.20 SF194
324 Type HT/4 or HTF/4 for opening of 880 x 2190mm height.
no $259.40 SF195
Page 45 of 100
HOUSING AND DEVELOPMENT BOARDSTANDARD SCHEDULE OF RATES FOR BUILDING WORKS (JUL 2013)
S/N DESCRIPTION UNIT RATE($) CODE
CARPENTRY AND JOINERY (CONT'D)
325 12mm thick calcium silicate fixed panel to top of doorcomplete with supporting frames as specified.
m² $49.00 SF187
326 38mm thick semi-solid timber toilet door with highpressure plastic laminated on both sides as specified toopening size 975x2190mm (door frame and ironmongerymeasured separately).
no $349.00 SF217
327 38mm thick single-leaf solid timber bedroom door TypeDM4, DM5 and DM6 with approved veneered plywoodfacing and decorative inlays on both sides complete withvarnish as specified to opening size of 975x2190mmheight (door frame and ironmongery measuredseparately).
no $367.00 SF214
328 38mm thick single-leaf semi-solid timber bedroom doorType DM4A, DM5A and DM6A with approved veneeredplywood facing and decorative inlays on both sidescomplete with varnish as specified to opening size of975x2190mm height (door frame and ironmongerymeasured separately).
no $343.30 SF218
329 45mm thick solid timber main entrance door Type DM1,DM2 and DM3 with approved veneered plywood facingand decorative inlays on both sides and complete withmild steel door frame, varnish, approved ironmongery asspecifed to opening size of 1200x2190mm height.
no $825.70 SF216
330 45mm thick half-hour fire-rated solid timber main entrancedoor Type FDM1, FDM2 and FDM3 with approvedveneered plywood facing and decorative inlays on bothsides and complete with mild steel door frame, varnish,approved ironmongery as specifed to opening size of1200x2190mm height.
no $877.10 SF215
Page 46 of 100
HOUSING AND DEVELOPMENT BOARDSTANDARD SCHEDULE OF RATES FOR BUILDING WORKS (JUL 2013)
S/N DESCRIPTION UNIT RATE($) CODE
CARPENTRY AND JOINERY (CONT'D)
45mm thick double-leaf half-hour fire rated timbersurface finished composite door complete with 100 x63mm timber door frame, all necessary ironmongeryand accessories as specified:
331 Type FDT2F for opening of 1500 x 2190mm height. no $948.60 SF089
332 Type FST2 for opening of 1500 x 2190mm height. no $957.40 SF202
45mm thick single-leaf half-hour fire rated timbersurface finished composite door complete with 100 x63mm timber door frame, all necessary ironmongeryand accessories as specified (fire-rated removablepanel measured separately) :
333 Type FDT1B/FDF1B for opening of 450 x 2190mm height.
no $542.60 SF145
334 Type FDT1C/FDF1C for opening of 500 x 2190mm height.
no $551.00 SF146
335 Type FDT1E/FDF1E for opening of 650 x 2190mm height.
no $577.10 SF148
336 Type FDT1F/FDF1F for opening of 750 x 2190mm height.
no $588.00 SF149
337 Type FDT1G/FDF1G for opening of 850 x 2190mm height.
no $594.60 SF150
338 Type FDT2H for opening of 1000 x 2190mm height. no $612.70 SF091
339 Type FST1 for opening of 1000 x 2190mm height. no $664.30 SF201
340 Type FDT2J for opening of 1000 x 2190mm height with clear glass observation panel size 150 x 300mm.
no $636.30 SF092
341 45mm thick half-hour fire rated removal timber panel with3mm thick plywood finish on both sides and complete with 100x63mm thick timber frame to service duct above doorpanel.
m² $306.00 SF207
Page 47 of 100
HOUSING AND DEVELOPMENT BOARDSTANDARD SCHEDULE OF RATES FOR BUILDING WORKS (JUL 2013)
S/N DESCRIPTION UNIT RATE($) CODE
CARPENTRY AND JOINERY (CONT'D)
Approved waterproofed plywood in panels forshelves, partitions and the like:
342 6mm thick . m² $17.90 SF033
343 9mm thick . m² $19.80 SF034
344 12mm thick. m² $21.90 SF035
345 18mm thick. m² $26.60 SF036
346 25mm thick. m² $29.20 SF037
Page 48 of 100
HOUSING AND DEVELOPMENT BOARDSTANDARD SCHEDULE OF RATES FOR BUILDING WORKS (JUL 2013)
S/N DESCRIPTION UNIT RATE($) CODE
IRONMONGERY
Brass lever action flush bolt in satin finish:
347 200 x 20mm wide. no $10.70 SG091
348 300 x 20mm wide. no $12.10 SG092
Stainless steel shoot bolt:
349 90 x 27mm barrel/square shoot bolt. no $6.40 SG013
350 240 x 27mm barrel/square shoot bolt. no $8.70 SG014
Stainless steel lever action flush bolt:
351 225 x 25mm wide. no $9.80 SG072
352 150 x 25mm wide. no $8.50 SG073
Stainless steel lever action box type flush bolt insatin finish:
353 200 x 20mm wide. no $9.40 SG123
354 300 x 20mm wide. no $10.30 SG124
Stainless steel butt hinges (grade 304):
355 100 x 70 x 1.5/1.7/1.8mm (±0.2mm) thick. no $4.90 SG141
356 102 x 76 x 2.0mm thick. no $5.30 SG075
357 102 x 76 x 3mm thick satin finished solid brass hingeswith flat button tip and ball bearing.
no $7.80 SG090
358 Nickel plated cabinet spring hinge. no $2.30 SG137
Cabin hook and eye:
359 80mm brass. no $9.70 SG080
360 100mm stainless steel. no $13.90 SG041
4mm thick stainless steel plate locking eyes for:
361 Single leaf door. set $15.30 SG096
362 Double leaf door. set $16.70 SG093
Page 49 of 100
HOUSING AND DEVELOPMENT BOARDSTANDARD SCHEDULE OF RATES FOR BUILDING WORKS (JUL 2013)
S/N DESCRIPTION UNIT RATE($) CODE
IRONMONGERY (CONT'D)
363 95mm stainless steel bow handle. no $7.20 SG079
364 18mm diameter (min) x approximate length 225mmstainless steel pull handle Tiki PH-20/BB/225SS.
no $18.10 SG110
365 300 x 150 x 1.2mm thick stainless steel push plate. no $24.90 SG111
366 150mm stout hasp and staple. no $22.10 SG078
367 Aluminium die cast single panic bolt with extrudedaluminium guides in silver colour finish Accord 376 forsingle door complete with cylinder panic lock.
no $244.70 SG116
368 Solid brass magnetic door holder. no $11.70 SG136
369 Antique brass finish door viewer. no $8.70 SG040
370 Slim line door closer with cushioned back checking actionas specified.
no $49.50 SG142
371 Rebated 5 pin double cylinder mortice lockset completewith brass chromium plated/stainless steel handle asspecified.
no $80.70 SG143
372 Rebated 5 pin single cylinder antique brass mortice leveron backplate lockset complete with thumb turn and solidbrass lever handles on both sides for entrance door asspecified.
no $87.00 SG144
373 Cylinder mortice night latch with chromium plated finishincluding the provision of keys as specified.
no $93.40 SG145
374 Antique brass finish lever handle lockset with 5-pin singlecylinder and thumb turn (key on outside and thumb turnon inside) with lever handles on both sides for bedroomdoor as specified.
no $72.70 SG150
375 Antique brass finish lever handle lockset with emergencyrelease on outside and thumb turn on inside with leverhandles on bothsides for bathroom door as specified.
no $68.50 SG151
376 Antique brass finish 5 pin tumbler single cylinder knobset(with key on the outside and push button on the inside)for bedroom door as specified.
no $28.70 SG139
377 Antique brass finish privacy knobset with emergencyrelease on the outside and push button on the inside forbathroom door as specified.
no $26.10 SG138
378 Privacy knobset with emergency release as specified. no $23.10 SG146
379 Cylinder deadlock as specified. no $93.40 SG147
Page 50 of 100
HOUSING AND DEVELOPMENT BOARDSTANDARD SCHEDULE OF RATES FOR BUILDING WORKS (JUL 2013)
S/N DESCRIPTION UNIT RATE($) CODE
IRONMONGERY (CONT'D)
Padlock under master key as specified:
380 Union 3104-50mm. no $15.50 SG061
381 Union 3142. no $31.10 SG062
382 Union 3122/2 PL. no $16.60 SG106
383 Yale 110.30. no $12.90 SG063
384 Yale 110.50. no $17.90 SG105
385 Yale 110.60. no $25.00 SG064
386 Abloy 330C/25. no $32.10 SG065
387 Abloy 320C/20. no $32.10 SG127
388 Abloy 330C/25 under key alike series. no $45.00 SG095
389 Stainless steel cup handle as specified. no $12.20 SG148
390 Stainless steel cup handle passage latch with cuphandles on both sides as specified.
no $30.30 SG149
391 Brass rebated part for lockset. no $12.10 SG094
Page 51 of 100
HOUSING AND DEVELOPMENT BOARDSTANDARD SCHEDULE OF RATES FOR BUILDING WORKS (JUL 2013)
S/N DESCRIPTION UNIT RATE($) CODE
STRUCTURAL STEELWORK & METALWORK
Galvanised steel Class 'A' pipe bent to shape andfixed as rails including necessary bends, tees, etcwelded (masonry work measured separately):
392 50mm diameter. m $14.20 SH469
393 40mm diameter. m $11.00 SH470
394 30mm diameter. m $9.70 SH471
395 20mm diameter. m $7.40 SH472
396 Galvanised wrought iron holdfast 25x230x3mm, one endscrewed to door or window frames and the other endfishtailed and built into joints of brick or block walls, orcast into reinforced concrete walls/columns.
no $1.80 SH410
397 Heavy duty hot-dipped galvanised steel gratingcomprising of 65x9mm thick flats as framing, 65x9mmthick intermediate flats spaced at 30mm centres restingon 12mm diameter rods at 85mm centres and supportingon 75x75x9.4mm thick angle frame anchored to concretestructure with mild steel fish tail.
m² $888.60 SH475
398 Heavy duty hot-dipped galvanised steel gratingcomprising of 65x9mm thick flats as framing, 50x9mmthick intermediate flats spaced at 30mm centres restingon 10mm diameter rods at 75mm centres and supportingon 75x75x9.4mm thick angle frame anchored to concretestructure with mild steel fish tail.
m² $807.50 SH590
399 Heavy duty hot-dipped galvanised steel gratingcomprising of 65x10mm thick flats as framing, 55x10mmthick intermediate flats at 30mm centres resting on 10mmdiameter bars at 75mm centres and supporting on75x60x8mm thick angle frame anchored to concretestructure with mild steel fish tail.
m² $748.90 SH714
400 300mm wide hot dipped galvanised steel grating overapron drain comprising of 50x8mm thick galvanised steelflats as framing infilled with 10 nos 25x6mm thickgalvanised steel flats resting on 25x6mm thick galvanisedsteel flat supports at 200mm centres as specified.
m $87.40 SH658
Page 52 of 100
HOUSING AND DEVELOPMENT BOARDSTANDARD SCHEDULE OF RATES FOR BUILDING WORKS (JUL 2013)
S/N DESCRIPTION UNIT RATE($) CODE
STRUCTURAL STEELWORK & METALWORK (CONT'D)
401 300x600mm hot dipped galvanised steel hinged gratingover apron drain comprising of 32x9mm thick galvanisedsteel flats as framing infilled with 9 nos 25x6mm thickgalvanised steel flats resting on 2 nos 25x6mm thickgalvanised steel flats and supported on 64x38x4.5mmthick galvanised steel angle frame anchored to concretestructure as specified.
no $72.20 SH659
402 300x600mm hot-dipped galvanised hinged gratingcomplete with 3mm thick galvanised mild steel chequeredplate over reinforced concrete apron drain as specified.
no $70.20 SH568
403 0.8mm thick galvanised steel motorised roller shutter(with ventilation holes) finished with colourbond siliconemodified polyester coating complete with channel guide,shutter motor, angle bolts, bottom rail, auto-stop safetydevice, push-button switches in weatherproof control boxwith utility lock and all necessary components inaccordance with Manufacturer's instructions tocentralised refuse chamber with approximate overall size3400mm (min) wide x 3800mm height to underside ofmotor casing.
no $3,780.00 SH411
404 0.5mm (minimum) thick zincalume steel motorised rollershutter (with ventilation holes) finished with colourbondsilicone modified polyester coating complete with channelguide, shutter motor, angle bolts, bottom rail, auto-stopsafety device, push-button switches in weatherproofcontrol box with utility lock and all necessary componentsin accordance with Manufacturer's instructions tocentralised refuse chamber with approximate overall size3400mm (min) wide x 3800mm height to underside ofmotor casing.
no $3,984.80 SH489
405 Galvanised steel grille panel over parapet at staircase &access balcony comprising of 50x50x1.6mm thick hollowsection frame filled in with 18x9mm thick flats spaced atnot more than 100mm centres welded on to frame andthe panel fixed to wall with 38x9mm fishtail holdfast.
m2 $156.30 SH707
406 Galvanised steel railing 900mm high at staircasecomprising of 18x9mm thick flat baluster spaced at notmore than 100mm centres and 25x25x1.6mm thick hollowsection supports at not more than 1200mm centres, allwelded to 43mm diameter x 1.6mm thick hollow sectionhandrail and 38x9mm thick flat bottom rail and thesupport cast into concrete curb.
m $114.90 SH708
Page 53 of 100
HOUSING AND DEVELOPMENT BOARDSTANDARD SCHEDULE OF RATES FOR BUILDING WORKS (JUL 2013)
S/N DESCRIPTION UNIT RATE($) CODE
STRUCTURAL STEELWORK & METALWORK (CONT'D)
407 Galvanised steel grille panel comprising of 50x50x6mmthick hollow section framings filled in with 19x10x1.2mmthick hollow section members welded to the frame andpanel fixed to wall with 25x25x2.2mm thick hollow sectionsupports.
m² $106.10 SH587
408 Mild steel Grade 43A for flats, angles, tees, channels,hollow sections, square sections, rivets and bolts, etc. ofany size fabricated and fixed including welding or bolting,and painting with one coat of lead and chromate-freeprimer (for structural steel work only).
kg $6.70 SH018
409 Mild steel flats, angles, tees, channels, rivets and bolts,etc. of any size fabricated and fixed including welding orbolting (for non-structural steel work only).
kg $4.90 SH019
410 Extra over mild steel rods, flats, angles, tees, channels,hollow sections, rivets, bolts, etc for galvanising in lieu ofpainting one coat of lead and chromate-free primer.
kg $0.40 SH670
411 Extra over mild steel rods, flats, angles, tees, channels,hollow sections, rivets, bolts, etc for galvanising.
kg $0.70 SH584
412 13mm diameter mild steel fan hook to concrete surface ofceiling.
no $7.50 SH022
413 Ramset Nail No.2330 or equal and approved includinguse of gun and explosive charges.
no $0.70 SH023
414 Mild steel blast door BD4 for household shelter completewith mild steel door frames, hinges, locking device,stainless steel handles ventilation sleeve and plate units,etc including approved primer as specified.
no $1,221.90 SH671
415 Wrought iron steel gate Type MG1A, MG2A and MG3Afixed to metal door frame of entrance door of openingsize 1200x2190mm height complete with approvedironmongery, wrought iron house number plate andpainting as specified.
no $552.00 SH715
Page 54 of 100
HOUSING AND DEVELOPMENT BOARDSTANDARD SCHEDULE OF RATES FOR BUILDING WORKS (JUL 2013)
S/N DESCRIPTION UNIT RATE($) CODE
STRUCTURAL STEELWORK & METALWORK (CONT'D)
Mild steel door frame fixed into door openings inaccordance with Board's Standard Drawingsincluding one coat of approved primer and allnecessary fittings and hinges, all as specified:
416 90 x 45 x 1.6mm thick jamb to opening size 900mm width x 2190mm height.
no $94.40 SH062
417 130 x 45 x 1.6mm thick jamb to opening size 900mm width x 2190mm height.
no $110.20 SH073
418 70 x 60 x 1.6mm thick jamb to opening size 1000mm width x 2190mm height.
no $134.60 SH084
3.175mm B.G. x 50mm PVC coated mesh Chain LinkFencing of the following heights, to top of mesh with3 nos. horizontal lines of double strand 2.517mm B.G.galvanised barbed wire above at 100mm centres, thechain link and barbed wires fixed to and including50x50x6mm angle iron posts at 3m centres with topbent to form spurs and bottom cast in300x300x450mm deep concrete (1:3:6) foundationsincluding all necessary straining and tying wires andsplit pins and priming and painting posts with onecoat aluminium paint:
419 1.20m high. m $36.40 SH009
420 1.50m high. m $39.60 SH011
421 1.80m high. m $44.80 SH013
422 2.10m high. m $48.80 SH015
423 2.40m high. m $63.70 SH017
424 625mm high fluorocarbon coated aluminium sunbreakercomprising of 50.8mm diameter x 3mm thick aluminiumCHS frames filled in with 3mm thick aluminium perforatedsheets and fixed according to PE's recommendations asspecified (rate inclusive of the provision of 10-yearwarranty).
m $157.30 SH672
425 0.7mm thick aluminium false ceiling comprising of 600 x600mm double coated polyester stove enamelled colouraluminium tiles complete with all fixing accessories,suspension hangers, etc in accordance to Manufacturer'sinstructions.
m² $106.50 SH585
426 3mm thick aluminium chequered plate cover to bulk metersump complete with stainless steel handle, hinges andwelded to and including galvanised steel frames.
m2 $265.60 SH709
Page 55 of 100
HOUSING AND DEVELOPMENT BOARDSTANDARD SCHEDULE OF RATES FOR BUILDING WORKS (JUL 2013)
S/N DESCRIPTION UNIT RATE($) CODE
STRUCTURAL STEELWORK & METALWORK (CONT'D)
Natural anodised aluminium door comprising of 97 x42 x 2.3mm thick natural anodised aluminium top railand stiles, and 120x42x2.3mm thick middle andbottom rails filled in with 2.3mm thick naturalanodised aluminium louvres complete with 2.3mmthick galvanised steel door frame and all necessaryironmongery and accessories as specified:
427 Single leaf door Type DT5 for opening of 900 x 2190mm height.
no $1,396.20 SH420
428 Double-leaf door Type D7A for opening of 1500 x 2190mm height.
no $2,242.20 SH479
Natural anodised aluminium door comprising of 40 x30 x 3mm thick aluminium stiles, top, bottom andintermediate rails covered with 2mm thick aluminiumflat sheet on both faces and fill in with rockwool(density: 60kg/m³) complete with 2.3mm thickaluminium door frame and all ironmongery andaccessories as specified:
429 Single-leaf door Type DT2G/DT2J for opening of 1000 x 2190mm height.
no $1,474.70 SH599
430 Double-leaf door Type DT2E for opening of 1500 x 2190mm height.
no $2,364.10 SH597
Natural anodised aluminium door comprising of 100 x42 x 2.3mm thick aluminium stiles, top, bottom andintermediate rails covered with 2mm thick aluminiumflat sheet on both faces complete with 2.3mm thickaluminium door frame and all ironmongery andaccessories as specified:
431 Single-leaf door Type STM1 for opening of 1000 x 2190mm height.
no $1,764.50 SH681
432 Double-leaf door Type STM2 for opening of 1500 x 2190mm height.
no $2,795.20 SH682
Page 56 of 100
HOUSING AND DEVELOPMENT BOARDSTANDARD SCHEDULE OF RATES FOR BUILDING WORKS (JUL 2013)
S/N DESCRIPTION UNIT RATE($) CODE
STRUCTURAL STEELWORK & METALWORK (CONT'D)
Natural anodised aluminium door comprising ofaluminium supports and bracings covered with 2mmthick aluminium flat sheet on both faces and filled inwith rockwool complete with aluminium refusehopper, fixed aluminium louvred vent and 2.3mmthick aluminium door frame and all ironmongery andaccessories as specified:
433 Single leaf door Type DT6 for opening of 1000 x 2190mm height.
no $2,408.00 SH600
434 Double-leaf door Type DT6B for opening of 1500 x 2190mm height.
no $3,514.30 SH602
Heavy duty natural anodised aluminium louvred doorfor ESS comprising of 2.3mm thick aluminiumlouvres complete with 2mm thick aluminium doorframe including ironmongery all as specified:
435 Double-leaf door Type ALD/1 for opening of 2700 x 2700mm height.
no $3,045.30 SH574
436 Double-leaf door Type ALD/2 for opening of 1800 x 2900mm height.
no $2,386.10 SH579
Heavy duty natural anodised aluminium flush door forESS complete with 2mm thick aluminium door frameincluding ironmongery all as specified:
437 Single-leaf door Type AFD/3 for opening of 900 x 1500mm height.
no $1,491.20 SH711
438 Double-leaf door Type AFD/4 for opening of 1800 x 1500mm height.
no $2,429.80 SH712
439 Single-leaf door Type AFD/5 for opening of 900 x 2200mm height.
no $1,638.30 SH713
Bronze anodised aluminium louvred vent at serviceduct complete with frame filled in with 2.3mm thickextruded aluminium louvred blades for:
440 Opening size 615 x 400mm height. no $117.30 SH605
441 Opening size 310 x 900mm height. no $144.80 SH606
Page 57 of 100
HOUSING AND DEVELOPMENT BOARDSTANDARD SCHEDULE OF RATES FOR BUILDING WORKS (JUL 2013)
S/N DESCRIPTION UNIT RATE($) CODE
STRUCTURAL STEELWORK & METALWORK (CONT'D)
442 Three-way natural anodised aluminium letter box with anti-junk mail device in accordance with Board's StandardDrawings including master doors, locks and keys andengraving with house numbers, block numbers and streetname to top frame of letter box (masonry work measuredseparately).
no $89.10 SH717
443 Block number numeral size 500mm high x 35mm deepmade to profile, with 1.5mm thick bronze anodisedaluminium sheet and fixed to wall with aluminiumextruded sections as specified.
no $44.30 SH559
Anodised aluminium motorised roller shutter (withventilation holes) with channel guide, shutter motor,angle bolts, bottom rail, auto-stop safety device, push-button switches in weatherproof control box withutility lock and all necessary components inaccordance with Manufacturer's instructions:
444 Approximate size 3400mm wide (min) x 3800mm height to underside of motor casing for centralised refuse chamber comprising of 1.6mm thick extruded aluminium curtain interlocking slats.
no $3,910.00 SH412
445 Approximate size 2100mm wide (min) x 2100mm height to underside of motor casing for utilities centre comprising of 1.6mm thick extruded aluminium curtain interlocking slats.
no $1,000.50 SH607
446 Aluminium alloy inspection door overall size 550 x 800mmcomprising of 1.2mm thick aluminium sheets to bothfaces supported with aluminium "C" channel bracingscomplete with aluminium frames, 100mm stainless steelbutt hinges and cam lock to manufacturer's details.
no $389.90 SH414
Page 58 of 100
HOUSING AND DEVELOPMENT BOARDSTANDARD SCHEDULE OF RATES FOR BUILDING WORKS (JUL 2013)
S/N DESCRIPTION UNIT RATE($) CODE
STRUCTURAL STEELWORK & METALWORK (CONT'D)
447 40mm thick inspection cover for refuse chute overall size1140 x 1140mm to top of refuse chute comprising of1.2mm thick anodised aluminium alloy sheets on bothfaces supported with 1.2mm thick galvanised steel "C"channel bracings and infilled with rockwool insulationcomplete with 5mm thick extruded aluminium sectionframings including stainless steel friction stay, hinges andhot dipped galvanised steel safety mesh supported ongalvanised steel angle, etc to manufacturer's details.
no $616.60 SH413
448 Aluminium catladder approximately 355mm widecomprising of aluminium 'U' channel handle, 25mmdiameter tubular aluminium rungs, complete withaluminium hooks, brackets, rubber cappings and allnecessary fixing accessories as specified.
m $100.30 SH586
449 Aluminium retractable ladder overall 2900mm longcomprising of aluminium 'C' channel, aluminium hooks,25mm diameter aluminium rungs spaced at 305mm apartand complete with 2 sets of aluminium fixing bracketsincluding all necessary fixing accessories as specified.
no $279.10 SH129
450 Aluminium retractable ladder overall 5700mm longcomprising of aluminium 'C' channel, aluminium hooks,25mm diameter aluminium rungs spaced at 305mm apartand complete with 5 sets of aluminium fixing bracketsincluding all necessary fixing accessories as specified.
no $959.40 SH130
451 Aluminium cage guard comprising of 6 nos. of 32mmdiameter (external) aluminium pipes spaced not morethan 650mm apart with 38x6mm thick vertical aluminiumflats rivetted to pipes and including all necessary fixingaccessories as specified.
no $177.20 SH131
452 Purpose made aluminium handrails of overall 1000mm(approx) height to roof top access opening comprising of32mm diameter (external) aluminium pipe bent to shapeand welded with 10mm thick aluminium plates andincluding all necessary fixing accessories as specified.
pr $392.60 SH132
453 Bronze anodised extruded aluminium framed adjustablelouvred vents complete with aluminium 'U' clips/holders,6mm thick obscure wired rough cast glass louvres and allnecessary fixing and jointing materials and accessoriesas specified (measurement based on size of opening).
m² $404.50 SH677
Page 59 of 100
HOUSING AND DEVELOPMENT BOARDSTANDARD SCHEDULE OF RATES FOR BUILDING WORKS (JUL 2013)
S/N DESCRIPTION UNIT RATE($) CODE
STRUCTURAL STEELWORK & METALWORK (CONT'D)
454 Bronze anodised extruded aluminium framed fixedlouvred vent complete with 2.3mm thick extruded bronzeanodised aluminium louvred blades, and all necessaryfixing and jointing materials and accessories as specified(based on size of opening).
m² $387.50 SH678
Bronze anodised extruded aluminium framed windowcomplete with 5mm thick green grey/grey tinted floatglass and ironmongery and all necessary fixing andjointing materials and accessories as specified(measurement based on size of opening):
455 Top hung casement window. m² $469.20 SH673
456 Top and side hung casement windows. m² $364.50 SH674
457 2-track sliding window with top hung casement. m² $302.40 SH675
458 3-track sliding window with top hung casement. m² $301.90 SH676
459 Bronze anodised extruded aluminium framed sliding doorcomplete with 6mm thick green grey/grey tinted floatglass, ironmongery and jointing materials and accessoriesas specified (measurement based on size of opening).
m² $240.10 SH680
460 Bronze anodised extruded aluminium framed fixedlouvred vent for ESS complete with 2.3mm thick extrudedbronze anodised aluminium louvred blades and allnecessary fixing and jointing materials and accessoriesas specified (measurement based on size of opening).
m² $456.50 SH706
Page 60 of 100
HOUSING AND DEVELOPMENT BOARDSTANDARD SCHEDULE OF RATES FOR BUILDING WORKS (JUL 2013)
S/N DESCRIPTION UNIT RATE($) CODE
STRUCTURAL STEELWORK & METALWORK (CONT'D)
2mm thick natural anodised aluminium sign platewith helvetica medium letters and figures/symbolsengraved in black/red colour including fixing withstainless steel screws as specified:
461 200/220 x 25mm services duct signage. no $13.20 SH480
462 300 x 300mm 'No Smoking' sign plate. no $21.00 SH582
463 700mm to 1000mm long x 120mm high sign plates for services rooms.
no $36.20 SH468
464 700mm to 1000mm long x 120mm high warning sign plate for consumer switch room.
no $36.20 SH142
2mm thick natural anodised aluminium sign platewith folio caravelle bold letters and figures/symbolsengraved in red colour including fixing with stainlesssteel screws as specified :
465 70mm height x width of door leaf (approximately 290mm to 790mm) with the wordings "Wet Rising Main Outlet", "Dry Rising Main Inlet", "Fire Hose Reel" or "Down Comer Outlet".
no $23.00 SH660
466 130mm height x width of door leaf (approximately 290mm to 790mm) with the wordings "Wet Rising Main Outlet", "Dry Rising Main Outlet", "Wet Rising Main Inlet", "Dry Rising Main Inlet" or "Down Comer Outlet".
no $25.30 SH661
Signplate to multi-storey carpark comprising of 2mmthick natural anodised aluminium plate withapproved Engineer's grade reflective sheets withhelvetica medium letters and figures/symbols fixed towall as specified:
467 450 x 250mm. no $28.00 SH704
468 450 x 450mm. no $53.00 SH591
469 600 x 250mm. no $36.60 SH705
470 600 x 450mm. no $58.20 SH592
Page 61 of 100
HOUSING AND DEVELOPMENT BOARDSTANDARD SCHEDULE OF RATES FOR BUILDING WORKS (JUL 2013)
S/N DESCRIPTION UNIT RATE($) CODE
STRUCTURAL STEELWORK & METALWORK (CONT'D)
471 Height limit signboard comprising of 600 x 600 x 2mmthick aluminium plate with approved Engineer's gradereflective sheets and letterings on one face mounted onand including 50 x 50 x 6mm thick mild steel hollowsection with base plate set in concrete (1:2:4) foundationand all necessary excavation as specified.
no $216.10 SH593
472 External clothes drying racks consist of stainless steelclothes drying racks extrusion with 3 nos of fixed stainless steel poles, bend sections and all necessary componentsfixed to structure as specified,
set $609.50 SH112
473 Internal retractable clothes drying racks consist ofaluminium extrusion poles (for ceiling mounted); brackets,links, fasteners and all necessary components fixed tostructure as specified.
set $526.10 SH113
474 Complete set of clothes drying racks at recess areacomprising of 2 nos aluminium racks and stainless steelrailings of approximate size 2800 x 1250mm height asspecified.
set $948.80 SH571
2mm thick grade 304 hair-line finish stainless steelplate signage with letterings and graphics engraved,all as specified:
475 200 x 200mm signage for central refuse chute. no $19.60 SH416
476 300 x 300mm plaque at 1st storey lift entrance. no $28.40 SH417
477 Foot-operated grade 304 stainless steel refuse chutehopper to centralised refuse chute complete with allnecessary fixing accessories as specified.
no $862.50 SH476
Page 62 of 100
HOUSING AND DEVELOPMENT BOARDSTANDARD SCHEDULE OF RATES FOR BUILDING WORKS (JUL 2013)
S/N DESCRIPTION UNIT RATE($) CODE
STRUCTURAL STEELWORK & METALWORK (CONT'D)
Stainless steel pipe for railing purposes including allnecessary cutting, welding, polishing, bending toshape and fixing on site.(Measurement based onlength of stainless steel pipes)
478 19.1mm diameter x 1.0mm thick. m $32.60 SH687
479 19.1mm diameter x 1.2mm thick. m $33.20 SH688
480 25.4mm diameter x 1.0mm thick. m $40.60 SH689
481 25.4mm diameter x 1.5mm thick. m $42.60 SH690
482 31.8mm diameter x 1.5mm thick. m $51.90 SH691
483 31.8mm diameter x 2.0mm thick. m $54.80 SH692
484 38.1mm diameter x 1.5mm thick. m $60.50 SH693
485 38.1mm diameter x 2.0mm thick. m $63.90 SH694
486 50.8mm diameter x 1.5mm thick. m $76.70 SH695
487 50.8mm diameter x 2.0mm thick. m $81.70 SH696
Stainless steel square tube for railing purposesincluding all necessary cutting, welding, polishing,bending to shape and fixing on site. (Measurementbased on length of stainless steel square tube)
488 19.1mm x 19.1mm x 1.2mm thick. m $37.20 SH697
489 25.4mm x 25.4mm x 1.5mm thick. m $47.70 SH698
490 31.8mm x 31.8mm x 1.5mm thick. m $56.80 SH699
491 38.1mm x 38.1mm x 1.5mm thick. m $66.80 SH700
492 40.0mm x 40.0mm x 2.0mm thick. m $72.80 SH701
493 50.8mm x 50.8mm x 2.0mm thick. m $91.60 SH702
494 Stainless steel flats, angles, plates, channels, bolts, etcincluding cutting, welding, polishing and fixing on sitecomplete with other fixing accessories.
kg $26.10 SH703
Page 63 of 100
HOUSING AND DEVELOPMENT BOARDSTANDARD SCHEDULE OF RATES FOR BUILDING WORKS (JUL 2013)
S/N DESCRIPTION UNIT RATE($) CODE
STRUCTURAL STEELWORK & METALWORK (CONT'D)
Galvanised heavy duty expansion anchor boltincluding stud anchor, nut and washer :
495 8mm anchor diameter x 95mm long (Hilti HSL 3M8/20).
no $14.70 SH346
496 8mm anchor diameter x 115mm long (Hilti HSL 3M8/40).
no $16.10 SH347
497 10mm anchor diameter x 107mm long (Hilti HSL 3M10/20).
no $17.20 SH348
498 12mm anchor diameter x 120mm long (Hilti HSL 3M12/25).
no $23.50 SH349
499 12mm anchor diameter x 145mm long (Hilti HSL 3M12/50).
no $26.00 SH350
500 20mm anchor diameter x 183mm long (Hilti HSL 3M20/30).
no $61.10 SH351
501 24mm anchor diameter x 205mm long (Hilti HSL 3M24/30).
no $73.40 SH352
502 M10 x 108mm length (Ramset SA10108). no $11.70 SH353
503 M10 x 128mm length (Ramset SA10128). no $12.00 SH354
504 M12 x 98mm length (Ramset SA12098). no $12.70 SH355
505 M12 x 124mm length (Ramset SA12124). no $13.50 SH356
506 M12 x 153mm length (Ramset SA12153). no $13.80 SH357
507 M16 x 149mm length (Ramset SA16149). no $15.80 SH358
508 M16 x 167mm length (Ramset SA16167). no $18.40 SH359
509 M20 x 189mm length (Ramset SA20189). no $26.20 SH360
510 M20 x 219mm length (Ramset SA20219). no $27.20 SH361
511 M24 x 197mm length (Ramset SA24197). no $42.70 SH362
512 M24 x 236mm length (Ramset SA24236). no $44.80 SH363
Page 64 of 100
HOUSING AND DEVELOPMENT BOARDSTANDARD SCHEDULE OF RATES FOR BUILDING WORKS (JUL 2013)
S/N DESCRIPTION UNIT RATE($) CODE
STRUCTURAL STEELWORK & METALWORK (CONT'D)
Galvanised medium duty expansion anchor boltincluding stud anchor, nut and washer :
513 6mm anchor diameter x 65mm long (Hilti HSA M6x65).
no $2.80 SH365
514 6mm anchor diameter x 100mm long (Hilti HSA M6x100).
no $4.80 SH366
515 8mm anchor diameter x 75mm long (Hilti HSA M8x75).
no $4.90 SH367
516 8mm anchor diameter x 115mm long (Hilti HSA M8x115).
no $5.20 SH368
517 10mm anchor diameter x 90mm long (Hilti HSA M10x90).
no $5.60 SH369
518 10mm anchor diameter x 120mm long (Hilti HSA M10x120).
no $6.50 SH370
519 12mm anchor diameter x 110mm long (Hilti HSA M12x110).
no $7.20 SH371
520 12mm anchor diameter x 180mm long (Hilti HSA M12x180).
no $10.00 SH372
521 16mm anchor diameter x 145mm long (Hilti HSA M16x145).
no $10.00 SH373
522 20mm anchor diameter x 170mm long (Hilti HSA M20x170).
no $15.10 SH374
523 6mm anchor diameter x 45mm long (Ramset Trubolt T6045).
no $2.10 SH375
524 6mm anchor diameter x 55mm long (Ramset Trubolt T6055).
no $2.20 SH376
525 6mm anchor diameter x 85mm long (Ramset Trubolt T6085).
no $4.20 SH377
526 8mm anchor diameter x 50mm long (Ramset Trubolt T8050).
no $2.50 SH378
527 8mm anchor diameter x 65mm long (Ramset Trubolt T8065).
no $2.20 SH379
Page 65 of 100
HOUSING AND DEVELOPMENT BOARDSTANDARD SCHEDULE OF RATES FOR BUILDING WORKS (JUL 2013)
S/N DESCRIPTION UNIT RATE($) CODE
STRUCTURAL STEELWORK & METALWORK (CONT'D)
Galvanised medium duty expansion anchor boltincluding stud anchor, nut and washer (Cont'd):
528 8mm anchor diameter x 90mm long (Ramset Trubolt T8090).
no $4.20 SH380
529 8mm anchor diameter x 130mm long (Ramset Trubolt T8130).
no $4.80 SH381
530 10mm anchor diameter x 60mm long (Ramset Trubolt T10060).
no $2.40 SH382
531 10mm anchor diameter x 75mm long (Ramset Trubolt T10075).
no $2.40 SH383
532 10mm anchor diameter x 90mm long (Ramset Trubolt T10090).
no $4.40 SH384
533 10mm anchor diameter x 120mm long (Ramset Trubolt T10120).
no $5.20 SH385
534 12mm anchor diameter x 80mm long (Ramset Trubolt T12080).
no $4.70 SH386
535 12mm anchor diameter x 100mm long (Ramset Trubolt T12100).
no $4.80 SH387
536 12mm anchor diameter x 140mm long (Ramset Trubolt T12140).
no $5.60 SH388
537 16mm anchor diameter x 100mm long (Ramset Trubolt T16100).
no $5.70 SH389
538 16mm anchor diameter x 125mm long (Ramset Trubolt T16125).
no $6.40 SH390
539 16mm anchor diameter x 175mm long (Ramset Trubolt T16175).
no $8.30 SH391
540 20mm anchor diameter x 120mm long (Ramset Trubolt T20120).
no $9.10 SH394
541 20mm anchor diameter x 160mm long (Ramset Trubolt T20160).
no $12.20 SH396
542 20mm anchor diameter x 215mm long (Ramset Trubolt T20215).
no $16.80 SH398
Page 66 of 100
HOUSING AND DEVELOPMENT BOARDSTANDARD SCHEDULE OF RATES FOR BUILDING WORKS (JUL 2013)
S/N DESCRIPTION UNIT RATE($) CODE
STRUCTURAL STEELWORK & METALWORK (CONT'D)
Chemical Adhesive Galvanised stud anchor includinganchor rod, nut and washer :
543 8mm anchor diameter x 110mm long with chemical capsules (Ramset M8110/CHEM8).
no $5.90 SH399
544 10mm anchor diameter x 130mm long with chemical capsules (Ramset M10130/CHEM10).
no $7.00 SH400
545 12mm anchor diameter x 160mm long with chemical capsules (Ramset M12160/CHEM12).
no $8.50 SH401
546 16mm anchor diameter x 190mm long with chemical capsules (Ramset M16190/CHEM16).
no $10.60 SH402
547 24mm anchor diameter x 300mm long with chemical capsules (Ramset M24300/CHEM24).
no $20.70 SH403
548 8mm anchor diameter x 80mm long with adhesive capsule (Hilti HAS M8 + HVU).
no $12.20 SH404
549 10mm anchor diameter x 90mm long with adhesive capsule (Hilti HAS M10 + HVU).
no $14.60 SH405
550 12mm anchor diameter x 110mm long with adhesive capsule (Hilti HAS M12 + HVU).
no $17.20 SH406
551 16mm anchor diameter x 125mm long with adhesive capsule (Hilti HAS M16 + HVU).
no $23.70 SH407
552 20mm anchor diameter x 170mm long with adhesive capsule (Hilti HAS M20 + HVU).
no $33.40 SH408
553 24mm anchor diameter x 210mm long with adhesive capsule (Hilti HAS M24 + HVU).
no $42.20 SH409
Chemical Capsule all to manufacturer's instructions:
554 Hilti HVU M8. no $7.80 SH553
555 Hilti HVU M10. no $9.30 SH554
556 Hilti HVU M12. no $10.60 SH555
557 Hilti HVU M16. no $13.70 SH556
558 Hilti HVU M20. no $17.20 SH557
559 Hilti HVU M24. no $19.00 SH558
Page 67 of 100
HOUSING AND DEVELOPMENT BOARDSTANDARD SCHEDULE OF RATES FOR BUILDING WORKS (JUL 2013)
S/N DESCRIPTION UNIT RATE($) CODE
WALL AND CEILING FINISHES
560 Hack existing concrete surface to form keys and washand clean to receive finishes.
m² $4.50 SI001
Skim coat of approved skimming materials appliedfrom within the building:
561 To wall. m² $5.90 SI002
562 To ceiling. m² $6.40 SI004
Skim coat of approved skimming materials appliedfrom the external face of the building:
563 To wall. m² $7.10 SI003
564 To sides and soffit of beam and slab. m² $7.60 SI005
565 Skim coating to external RC surfaces in two coats to amaximum total thickness of 6mm using approvedskimming materials as specified.
m² $17.20 SI035
566 Two coats of polymer compound and cement (1:2)mixture (total thickness 2.5mm) to concrete blockwall.
m² $6.60 SI029
567 18mm thk plastering with approved PREPACKEDMORTAR MIX to RC surfaces, brickwalls and blockwallsetc., applied from within the building as specified.
m² $21.30 SI037
568 18mm thk plastering with approved PREPACKEDMORTAR MIX to RC surfaces, brickwalls and blockwallsetc., applied from the external face of the building asspecified.
m² $24.90 SI038
569 Extra over plastering for forming 20 x 15mm deep groovelines to walls, columns, beams, etc as specified.
m $3.80 SI032
570 Pattern coloured glazed wall tiles size (200 to 300)mm x(200 to 300)mm x 7mm thick of approved colours,patterns and texture to walls including prepacked mortarscreed as specified.
m² $54.60 SI039
571 Pattern coloured glazed wall tiles size 400mm x 200mm x7mm thick of approved colours, patterns and texture towalls including prepacked mortar screed as specified.
m² $55.60 SI040
572 Pattern coloured glazed wall tiles size 600mm x 300mm x7mm thick of approved colours, patterns and texture towalls including prepacked mortar screed as specified.
m² $59.70 SI041
573 Extra over pattern coloured glazed wall tiles for laying onecourse of Listello tiles size 198 x 65mm high.
m $9.80 SI036
Page 68 of 100
HOUSING AND DEVELOPMENT BOARDSTANDARD SCHEDULE OF RATES FOR BUILDING WORKS (JUL 2013)
S/N DESCRIPTION UNIT RATE($) CODE
WALL AND CEILING FINISHES (CONT'D)
First quality grade Y glazed ceramic tiles of approvedcolours, patterns and textures to walls includingprepacked mortar screed as specified:
574 200 x 200 x 8mm thick (nominal size). m² $52.90 SI033
575 Polished homogeneous ceramic tiles of approvedcolours, patterns and textures (nominal size 300 x 300 x9mm) to wall surface including prepacked mortar screedas specified.
m² $66.70 SI034
Page 69 of 100
HOUSING AND DEVELOPMENT BOARDSTANDARD SCHEDULE OF RATES FOR BUILDING WORKS (JUL 2013)
S/N DESCRIPTION UNIT RATE($) CODE
SANITARY, WATER AND GAS INSTALLATION
UPVC pipe for rainwater fixed to wall with collarbrackets as specified:
576 200mm diameter. m $32.30 SJ324
Extra over UPVC rainwater downpipe for fittings:
577 200mm diameter connector piece. no $40.20 SJ329
578 200 x 50mm diameter junction. no $38.00 SJ387
579 200mm diameter x 275 x 120 mm adaptor. no $129.50 SJ326
UPVC fittings for rainwater downpipe :
580 120 x 275mm rectangular elbow. no $143.90 SJ327
581 Rectangular 'Y' branch junction. no $143.90 SJ328
UPVC pipe for rainwater outlet embedded in concretefloor (concrete measured separately):
582 200 x 80 x 5mm thick rectangular pipe. m $33.20 SJ331
583 275 x 120 x 5mm thick rectangular pipe. m $40.50 SJ330
584 UPVC screw-down domical grating to top of 200mmdiameter pipe complete with 240 x 240mm square body.
no $42.30 SJ325
UPVC pipe for underground sewer with flexible jointslaid on concrete bed in trench (trench and concretebed measured separately) :
585 100mm diameter. m $11.90 SJ390
586 150mm diameter. m $15.60 SJ391
587 200mm diameter. m $26.80 SJ392
Extra over UPVC sewer pipe for fittings:
588 100mm diameter bend (all angles). no $7.60 SJ393
Page 70 of 100
HOUSING AND DEVELOPMENT BOARDSTANDARD SCHEDULE OF RATES FOR BUILDING WORKS (JUL 2013)
S/N DESCRIPTION UNIT RATE($) CODE
SANITARY, WATER AND GAS INSTALLATION (CONT'D)
Extra over UPVC sewer pipe for fittings (Cont'd):
589 100mm diameter Y-junction. no $16.10 SJ394
590 150mm diameter bend (all angles). no $12.30 SJ395
591 150mm diameter Y-junction. no $24.90 SJ396
592 200mm diameter bend (all angles). no $60.00 SJ397
593 200mm diameter Y-junction. no $41.60 SJ398
UPVC pipe Class D for soil, waste, ventilation,discharge stacks and down pipes fixed to wall orceiling with collar brackets :
594 80mm diameter. m $19.50 SJ428
595 100mm diameter. m $21.30 SJ399
596 150mm diameter. m $33.60 SJ400
UPVC pipe for soil, waste,ventilation, dischargestacks and down pipes fixed to wall or ceiling withcollar brackets :
597 32mm diameter. m $8.20 SJ401
598 50mm diameter. m $9.40 SJ402
599 80mm diameter. m $13.90 SJ403
600 100mm diameter. m $17.40 SJ404
601 150mm diameter. m $20.40 SJ405
Extra over UPVC soil, waste, ventilation, dischargestacks and down pipes for fittings:
602 32mm diameter bend (all angles). no $5.70 SJ406
603 50mm diameter bend (all angles) - with double-locking device.
no $6.20 SJ407
604 80mm diameter bend (all angles) - with double-locking device.
no $10.10 SJ408
605 80mm x 50mm diameter junction. no $13.30 SJ409
Page 71 of 100
HOUSING AND DEVELOPMENT BOARDSTANDARD SCHEDULE OF RATES FOR BUILDING WORKS (JUL 2013)
S/N DESCRIPTION UNIT RATE($) CODE
SANITARY, WATER AND GAS INSTALLATION (CONT'D)
Extra over UPVC soil, waste, ventilation, dischargestacks and down pipes for fittings (cont'd) :
606 100mm diameter bend (all angles) - with double-locking device.
no $9.50 SJ410
607 100mm diameter single junction - with double-locking device.
no $16.30 SJ411
608 100mm diameter double junction. no $20.80 SJ412
609 100mm x 50mm diameter single junction - with double-locking device.
no $17.50 SJ413
610 100mm x 50mm diameter double junction - with double-locking device.
no $26.20 SJ414
611 100mm x 80mm diameter single junction. no $13.60 SJ415
612 100mm x 80mm diameter double junction. no $22.60 SJ416
613 150mm diameter bend (all angles). no $13.00 SJ417
614 150mm diameter single junction. no $27.00 SJ418
UPVC fittings for soil, waste, ventilation, dischargestacks and down pipes :
615 80mm diameter adaptor. no $11.50 SJ422
616 100mm diameter adaptor. no $11.80 SJ423
617 150mm diameter adaptor. no $12.50 SJ424
Extra over UPVC soil, waste, ventilation, dischargestacks and down pipes for fittings Class D :
618 100mm x 80mm diameter level invert taper. no $8.90 SJ425
619 150mm x 100mm diameter level invert taper. no $11.40 SJ426
UPVC end cap to waste pipe :
620 50mm diameter. no $3.60 SJ296
621 100mm diameter. no $4.80 SJ295
622 150mm diameter. no $6.20 SJ294
Page 72 of 100
HOUSING AND DEVELOPMENT BOARDSTANDARD SCHEDULE OF RATES FOR BUILDING WORKS (JUL 2013)
S/N DESCRIPTION UNIT RATE($) CODE
SANITARY, WATER AND GAS INSTALLATION (CONT'D)
UPVC waste outlet to 50mm diameter waste pipecomprising of 110 x 110mm square base includingjointing to pipe and setting on concrete floor:
623 With dome-shaped screw-in grating cover. no $9.00 SJ271
624 With flat round screw-in grating cover. no $6.20 SJ333
UPVC downspout outlet with dome-shaped screw-ingrating complete with all necessary accessories andsetting in cement mortar as specified:
625 With 150 x 150mm square base to 80mm diameter pipe.
no $13.70 SJ231
626 With 200 x 200mm square base to 100mm diameter pipe.
no $18.50 SJ232
627 150mm diameter UPVC gully trap complete with hopperand 150 x 150mm UPVC grating with screw-in roundgrating cover and filter including jointing to waste pipeand encasing in concrete.
no $88.90 SJ265
628 100mm diameter UPVC floor waste complete with hopperand 150 x 150mm UPVC grating with screw-in roundgrating cover and filter including jointing to waste pipeand encasing in concrete.
no $58.00 SJ268
629 Anti-mosquito device to floor and gully traps as specified. no $2.60 SJ368
Page 73 of 100
HOUSING AND DEVELOPMENT BOARDSTANDARD SCHEDULE OF RATES FOR BUILDING WORKS (JUL 2013)
S/N DESCRIPTION UNIT RATE($) CODE
SANITARY, WATER AND GAS INSTALLATION (CONT'D)
100mm diameter UPVC floor trap complete with 150 x150mm UPVC hinged grating with round gratingcover including jointing to waste pipe:
630 'S' trap - with double-locking device. no $38.90 SJ264
631 'P' trap - with double-locking device. no $34.30 SJ349
UPVC socket sleeve to reinforced concrete flooropening:
632 100mm diameter. no $5.90 SJ344
633 80mm diameter. no $9.80 SJ507
634 50mm diameter. no $3.30 SJ346
UPVC vent cowl to top of pipe as specified:
635 100mm diameter. no $3.00 SJ229
636 150mm diameter. no $5.60 SJ230
Ductile iron pipe with cement lining laid on concretebed in trench (trench and concrete bed measuredseparately):
637 80mm diameter. m $43.90 SJ033
638 100mm diameter. m $38.40 SJ034
639 150mm diameter. m $52.10 SJ035
Extra over ductile iron pipe for:
640 80mm diameter bend (all angles). no $17.20 SJ036
641 100mm diameter bend (all angles). no $36.40 SJ037
642 150mm diameter bend (all angles). no $59.60 SJ038
Page 74 of 100
HOUSING AND DEVELOPMENT BOARDSTANDARD SCHEDULE OF RATES FOR BUILDING WORKS (JUL 2013)
S/N DESCRIPTION UNIT RATE($) CODE
SANITARY, WATER AND GAS INSTALLATION (CONT'D)
643 80mm diameter stainless steel washout connecting pipe350mm long with stainless steel flange at one end andwelded with and including 150mm diameter x 9mm thickstainless steel collar at mid-length and cast in reinforcedconcrete structure.
set $347.50 SJ027
644 28mm diameter stainless steel overflow warningconnecting pipe 400mm long welded with and includingstainless steel collar at mid-length and cast in reinforcedconcrete structure.
set $93.50 SJ028
645 15mm diameter stainless steel flexible connecting pipe400mm long welded with and including stainless steelcollar at mid-length and cast in reinforced concretestructure.
set $8.50 SJ261
Grade 30 concrete bed and haunching to drain pipecomplete with 40mm thick lean concrete and allnecessary formwork (drain pipes measuredseparately):
646 400mm wide x overall 400mm thick to 100mm diameter pipe reinforced with A10 WSF reinforcement.
m $49.70 SJ347
647 400mm wide x overall 400mm thick to 100mm diameter pipe reinforced with B10 WSF reinforcement.
m $51.00 SJ334
648 400mm wide x overall 400mm thick to 100mm diameter pipe reinforced with B10 WSF reinforcement and 2 nos T13 reinforcement bars.
m $55.20 SJ029
649 450mm wide x overall 450mm thick to 150mm diameter pipe reinforced with A10 WSF reinforcement.
m $58.50 SJ348
650 450mm wide x overall 450mm thick to 150mm diameter pipe reinforced with B10 WSF reinforcement.
m $59.90 SJ335
651 450mm wide x overall 450mm thick to 150mm diameter pipe reinforced with B10 WSF reinforcement and 2 nos T13 reinforcement bars.
m $64.20 SJ030
652 500mm wide x overall 500mm thick to 200mm diameter pipe reinforced with A10 WSF reinforcement.
m $67.40 SJ386
Page 75 of 100
HOUSING AND DEVELOPMENT BOARDSTANDARD SCHEDULE OF RATES FOR BUILDING WORKS (JUL 2013)
S/N DESCRIPTION UNIT RATE($) CODE
SANITARY, WATER AND GAS INSTALLATION (CONT'D)
Reinforced Concrete Grade 30 inspectionchamber/sump comprising of 150mm thick walls andbottom slab, 200mm thick top slab includingnecessary reinforcement and formwork completewith granolithic concrete benching, half roundvitrified clay main and branch channels, cementplastering to internal walls, lean concrete base andexcavation (inspection chamber/sump cover andframe measured separately):
653 Overall size 1200 x 1000 x 1070mm deep to invert. no $832.30 SJ298
654 Add to last item for each additional 150mm depth. no $80.90 SJ299
655 Overall size 1500 x 1000 x 1070mm deep to invert. no $955.50 SJ300
656 Add to last item for each additional 150mm depth. no $93.20 SJ301
657 Overall size 1800 x 1000 x 1070mm deep to invert. no $1,093.60 SJ302
658 Add to last item for each additional 150mm depth. no $105.40 SJ303
659 Overall size 2100 x 1000 x 1070mm deep to invert. no $1,284.80 SJ304
660 Add to last item for each additional 150mm depth. no $117.80 SJ305
661 Overall size 1650 x 1650 x 1070mm deep to invert. no $1,445.80 SJ306
662 Add to last item for each additional 150mm depth. no $127.00 SJ307
663 Overall size 900 x 900 x 600mm deep to invert. no $393.70 SJ308
664 Add to last item for each additional 150mm depth. no $44.70 SJ309
665 Overall size 1200 x 1000 x 750mm deep to invert. no $622.60 SJ310
666 Add to last item for each additional 150mm depth. no $80.90 SJ311
Page 76 of 100
HOUSING AND DEVELOPMENT BOARDSTANDARD SCHEDULE OF RATES FOR BUILDING WORKS (JUL 2013)
S/N DESCRIPTION UNIT RATE($) CODE
SANITARY, WATER AND GAS INSTALLATION (CONT'D)
667 Precast concrete inspection chamber size900x700(internal)x1070mm deep to invert complete withreinforcement, granolithic concrete benching, channels,cast-in-situ concrete topping and excavation (structuralbeam supports, inspection chamber cover and framemeasured separately).
no $658.40 SJ502
668 Add to last item for each additional 150mm depth. no $42.20 SJ503
669 Precast concrete inspection chamber size1200x700(internal)x1070mm deep to invert complete withreinforcement, granolithic concrete benching, channels,cast-in-situ concrete topping and excavation (structuralbeam supports, inspection chamber cover and framemeasured separately).
no $787.20 SJ504
670 Add to last item for each additional 150mm depth. no $47.90 SJ505
671 Precast concrete encasement for 150mm diameter maindrainline including concrete haunching and jointing(excavation, drain pipe and structural supports measuredseparately).
m $137.10 SJ506
672 225mm thick (average) granolithic concrete (1:1:1) inbenching and haunching to bottom of inspectionchamber/sump finished to falls towards channels,including all necessary shaping of channels, bends etc asrequired.
m² $48.10 SJ051
673 100mm diameter half round vitrified clay straight or curvemain or branch channels to inspection chamber/sumpincluding bedding and jointing in cement mortar (1:1).
m $11.00 SJ054
674 150mm diameter ditto. m $13.80 SJ055
675 13mm thick cement and sand (1:2) rendering tointernal/external surfaces of inspection chamber/sump.
m² $11.90 SJ056
676 Light duty galvanised cast iron cover and frame size 600x 450mm for inspection chamber/sump including settingframe in cement mortar and sealing cover in grease andfine sand.
no $72.50 SJ057
677 Standard cast iron street gulley including connection, allnecessary excavation and concrete surround.
no $383.00 SJ046
Page 77 of 100
HOUSING AND DEVELOPMENT BOARDSTANDARD SCHEDULE OF RATES FOR BUILDING WORKS (JUL 2013)
S/N DESCRIPTION UNIT RATE($) CODE
SANITARY, WATER AND GAS INSTALLATION (CONT'D)
678 Close-coupled dual flush low capacity coloured vitreouschina pedestal w.c. suite complete with w.c bowl, seatand cover and cistern with a flushing capacity of 4.5 litresper single action flush, including all necessary fittings andaccessories.
no $250.60 SJ257
679 Wash-hand basin in coloured vitreous china size 500 x400mm complete with waste plug and chain, approvednon-corrosive brackets, UPVC waste pipe, bottle trap andall necessary washers, seals and nuts and fixed to wallall as specified.
no $98.10 SJ105
680 Wash-hand basin with pedestal stand in colouredvitreous china size 500 x 400mm complete with wasteplug and chain, approved non- corrosive brackets, UPVCwaste pipe, bottle trap and all necessary washers, sealsand nuts and fixed to wall all as specified.
no $157.80 SJ501
681 Integral coloured cultured marble basin and top ofapproximate size 525 x 1500mm with 100mm backsplash,200mm front apron complete with integrated basin,approved single lever mixer tap with pop-up waste, bottletrap, waste pipe and galvanised steel brackets for fixingto wall and all necessary accessories for fixing andjointing to pipework.
no $681.00 SJ274
Page 78 of 100
HOUSING AND DEVELOPMENT BOARDSTANDARD SCHEDULE OF RATES FOR BUILDING WORKS (JUL 2013)
S/N DESCRIPTION UNIT RATE($) CODE
SANITARY, WATER AND GAS INSTALLATION (CONT'D)
682 PUB approved stainless steel sensor operated flushvalve complete with stainless steel outlet flush pipes towater closets including fixing and jointing to water supplyand fittings as specified.
no $426.80 SJ286
683 PUB approved stainless steel sensor operated flushvalve complete with stainless steel outlet flush pipes tourinals including fixing and jointing to water supply andfittings as specified.
no $398.50 SJ285
684 15mm chromium plated brass pillar tap including allnecessary accessories for fixing and jointing topipeworks.
no $26.50 SJ106
685 15mm chromium plated brass pillar tap with swivel swanneck including all necessary accessories for fixing andjointing to pipeworks.
no $64.30 SJ107
686 Delay action tap including all necessary accessories forfixing and jointing to pipeworks.
no $164.40 SJ109
687 15mm chromium plated brass bib-tap including allnecessary accessories for fixing and jointing topipeworks.
no $24.80 SJ110
688 15mm chromium plated brass 2-way bib-tap including allnecessary accessories for fixing and jointing topipeworks.
no $33.80 SJ290
689 15mm chromium plated ceramic disc cartridge operatedsingle lever basin mixer tap complete with pop-up wasteincluding all necessary accessories for fixing and jointingto pipeworks.
no $64.50 SJ273
690 Chrome plated bath mixer tap with single lever controlcomplete with adjustable jet shower head, 1.5m flexibleshower hose and sliding bar and all necessaryaccessories as specified.
set $109.30 SJ361
Page 79 of 100
HOUSING AND DEVELOPMENT BOARDSTANDARD SCHEDULE OF RATES FOR BUILDING WORKS (JUL 2013)
S/N DESCRIPTION UNIT RATE($) CODE
SANITARY, WATER AND GAS INSTALLATION (CONT'D)
Food-grade silicone thimble in natural colour with 4nos holes each 2.5mm diameter:
691 Size 18.5mm diameter x 2.5mm thick at basin tap inlet.
no $0.20 SJ350
692 Size 21.0mm diameter x 2.5mm thick for tap mixer. no $0.20 SJ351
693 15mm diameter constant flow regulator of 12 litres perminute for bib tap inlet at common areas.
no $5.50 SJ352
Stainless steel water supply pipe includingconnectors, elbows, bends, tees, reducers, etc andlaid in trench including excavation:
694 22mm diameter. m $20.00 SJ220
695 28mm diameter. m $23.40 SJ221
696 35mm diameter. m $28.80 SJ222
697 42mm diameter. m $34.20 SJ223
698 54mm diameter. m $57.90 SJ224
Stainless steel water supply pipe includingconnectors, elbows, bends, tees, reducers, etc. andfixed to roof top with concrete supports:
699 22mm diameter. m $13.20 SJ215
700 28mm diameter. m $16.50 SJ216
701 35mm diameter. m $21.20 SJ217
702 42mm diameter. m $26.60 SJ218
703 54mm diameter. m $50.30 SJ219
Stainless steel water supply pipes includingconnectors, elbows, bends, tees, reducers, etc. andfixed to wall with stainless steel clips/holderbats:
704 15mm diameter. m $13.10 SJ239
705 22mm diameter. m $17.00 SJ129
Page 80 of 100
HOUSING AND DEVELOPMENT BOARDSTANDARD SCHEDULE OF RATES FOR BUILDING WORKS (JUL 2013)
S/N DESCRIPTION UNIT RATE($) CODE
SANITARY, WATER AND GAS INSTALLATION (CONT'D)
Stainless steel water supply pipes includingconnectors, elbows, bends, tees, reducers, etc. andfixed to wall with stainless steel clips/holderbats(cont'd):
706 28mm diameter. m $21.50 SJ130
707 35mm diameter. m $28.20 SJ131
708 42mm diameter. m $34.90 SJ132
709 54mm diameter. m $61.10 SJ225
Concealed copper pipes for cold/hot water supplycomplete with couplings, elbows, tees, etc fixed towalls, columns, beams including forming recesses,cutting grooves or chases in walls, columns etc andmaking good on completion as specified:
710 15mm diameter. m $18.50 SJ362
711 22mm diameter. m $24.10 SJ363
712 28mm diameter. m $28.50 SJ364
Compression fitting caps for copper pipes:
713 15mm diameter. no $3.50 SJ365
714 22mm diameter. no $3.90 SJ366
715 28mm diameter. no $7.30 SJ367
Ductile iron pipes with cement lining for water mainsincluding spigot and socket joints, laid in trenchincluding excavation:
716 80mm diameter and backfilling with selected earth. m $53.20 SJ136
717 80mm diameter and backfilling with approved granular material.
m $102.40 SJ369
718 100mm diameter and backfilling with selected earth. m $50.10 SJ137
719 100mm diameter and backfilling with approved granular material.
m $99.10 SJ370
Page 81 of 100
HOUSING AND DEVELOPMENT BOARDSTANDARD SCHEDULE OF RATES FOR BUILDING WORKS (JUL 2013)
S/N DESCRIPTION UNIT RATE($) CODE
SANITARY, WATER AND GAS INSTALLATION (CONT'D)
Ductile iron pipes with cement lining for water mainsincluding flanged joints complete with bolts and nuts,laid on and including precast concrete supportblocks:
720 80mm diameter. m $58.10 SJ138
721 100mm diameter. m $53.40 SJ139
Ductile iron pipes with cement lining for water mainsincluding spigot and socket joints fixed to wall withholderbats:
722 80mm diameter. m $46.00 SJ140
723 100mm diameter. m $41.00 SJ145
Extra over 80mm diameter ductile iron cement linedpipes for water mains for fittings including flangedjoints complete with bolts and nuts:
724 Bends. no $75.00 SJ141
725 Tees. no $117.80 SJ142
726 Collars. no $88.40 SJ143
727 Socket adaptor. no $41.50 SJ144
Extra over 100mm diameter ductile iron cement linedpipes for water mains for fittings including flangedjoints complete with bolts and nuts:
728 Bends. no $82.60 SJ146
729 Tees. no $134.30 SJ147
730 Collars. no $101.90 SJ148
731 Duckfoot bend. no $41.20 SJ259
732 100mm diameter ductile iron flange adaptor fordistribution main complete with rubber gaskets, bolts andnuts all as specified.
no $123.60 SJ318
Cast iron sluice/gate valve with flanged ends:
733 80mm diameter. no $125.50 SJ151
734 100mm diameter. no $142.90 SJ152
Page 82 of 100
HOUSING AND DEVELOPMENT BOARDSTANDARD SCHEDULE OF RATES FOR BUILDING WORKS (JUL 2013)
S/N DESCRIPTION UNIT RATE($) CODE
SANITARY, WATER AND GAS INSTALLATION (CONT'D)
735 100mm diameter x 65mm ductile iron flanged flow nozzle. no $117.50 SJ260
Bronze spring loaded lift check valve:
736 35mm diameter. no $24.80 SJ263
737 40mm diameter. no $33.60 SJ205
Cast iron spring loaded lift check valve with flangedends:
738 80mm diameter. no $350.40 SJ206
739 100mm diameter. no $423.10 SJ207
Brass high pressure equilibrium ball valve with brassarm and copper float:
740 50mm diameter. no $469.40 SJ153
741 100mm diameter. no $1,203.90 SJ154
Brass gate valve:
742 40mm diameter. no $34.10 SJ208
743 50mm diameter. no $45.30 SJ209
Brass ball stop valve:
744 20mm diameter. no $18.80 SJ210
745 25mm diameter. no $24.00 SJ211
746 40mm diameter. no $44.90 SJ212
747 15mm diameter isolating ball stop valve. no $7.20 SJ498
748 25mm diameter brass ball float valve. no $53.40 SJ262
749 35mm diameter brass globe valve. no $48.80 SJ213
750 40mm diameter solenoid valve for automatic time-controlled refuse chute flashing system.
no $282.00 SJ214
751 Labour only for boring holes in UPVC pipes forapproximately 3.2m long at 50mm centre/centre for useas bin chute sparge pipe.
no $10.90 SJ173
Page 83 of 100
HOUSING AND DEVELOPMENT BOARDSTANDARD SCHEDULE OF RATES FOR BUILDING WORKS (JUL 2013)
S/N DESCRIPTION UNIT RATE($) CODE
SANITARY, WATER AND GAS INSTALLATION (CONT'D)
Brass high pressure screw down stop or bib cocks:
752 15mm diameter. no $12.80 SJ174
753 22mm diameter. no $20.60 SJ175
754 28mm diameter. no $37.70 SJ176
755 35mm diameter. no $79.10 SJ177
756 42mm diameter. no $97.70 SJ178
757 54mm diameter. no $140.70 SJ179
758 82mm diameter x 68mm high x 1.2mm thick purpose-made galvanised steel casing as locking device for publictap. (padlock measured separately).
no $7.80 SJ270
759 Rolled steel joists for support to tanks including bolts,fixing and painting.
kg $1.30 SJ181
760 63mm diameter Polyethylene gas pipe sleeved in 80mmdiameter UPVC pipe and laid in concrete channelincluding bituminous joints and filling up with cementmortar grout (concrete channel measured separately).
m $50.00 SJ491
761 63mm diameter Polyethylene gas pipe sleeved in 80mmdiameter UPVC pipe and laid in trench includingexcavation.
m $32.50 SJ495
762 63mm x 50mm diameter galvanised steel ElectrofusionTransition elbow to gas pipe.
no $46.90 SJ493
763 80mm diameter UPVC pipe sleeve for vertical gas pipefixed to wall.
m $13.90 SJ492
764 'Viking Johnson Junor' coupling for 50mm diametergalvanised steel gas pipe including locking ring, gasket,etc. and all necessary accessories.
no $44.00 SJ494
Heavy duty galvanised steel gas pipe includingsockets, connectors, elbows, tees, plugs, etc andfixed to wall or ceiling with collar brackets asspecified:
765 40mm diameter. m $18.10 SJ186
766 50mm diameter. m $21.30 SJ187
Page 84 of 100
HOUSING AND DEVELOPMENT BOARDSTANDARD SCHEDULE OF RATES FOR BUILDING WORKS (JUL 2013)
S/N DESCRIPTION UNIT RATE($) CODE
SANITARY, WATER AND GAS INSTALLATION (CONT'D)
Full bore ball valve:
767 15mm diameter. no $15.50 SJ195
768 20mm diameter. no $18.00 SJ196
769 25mm diameter. no $22.40 SJ197
770 32mm diameter. no $25.20 SJ198
771 40mm diameter. no $29.40 SJ199
772 50mm diameter. no $39.20 SJ200
773 80mm diameter. no $131.90 SJ201
Copper gas pipe including connectors, elbows,bends, tees, etc and fixed to wall:
774 15mm diameter. m $16.30 SJ202
775 22mm diameter. m $22.10 SJ203
776 UPVC Casing/Trunking for water and gas servicesincluding trunking cover with splayed edges, overall size84 x 51mm as specified.
m $12.90 SJ228
Heavy duty galvanised steel pipe complying with APIStandard 5L Grade B Schedule 40 with welded jointsand fixed to wall or ceiling with pipe clips or mildsteel brackets:
777 40mm diameter. m $24.80 SJ272
778 50mm diameter. m $28.10 SJ269
Class "C" galvanised steel pipes fixed to duct wall asdry, wet or hosereel rising main including allnecessary brackets, connectors, welded flanges,bolts, nuts and gaskets, etc and testing theinstallation as specified:
779 50mm diameter. m $18.00 SJ357
780 100mm diameter. m $63.80 SJ242
781 150mm diameter. m $85.80 SJ243
Page 85 of 100
HOUSING AND DEVELOPMENT BOARDSTANDARD SCHEDULE OF RATES FOR BUILDING WORKS (JUL 2013)
S/N DESCRIPTION UNIT RATE($) CODE
SANITARY, WATER AND GAS INSTALLATION (CONT'D)
Class "C" galvanised steel pipes fixed to duct wall asdry, wet or hosereel rising main including allnecessary brackets, connectors, welded flanges,bolts, nuts and gaskets, etc and testing theinstallation as specified (cont'd):
782 Extra over 50mm diameter pipe for bend or elbow. no $8.10 SJ496
783 Extra over 50mm diameter pipe for tee. no $9.00 SJ497
784 Extra over 100mm diameter pipe for bend. no $48.00 SJ244
785 Extra over 150mm diameter pipe for bend. no $90.20 SJ247
Rust proof electro galvanised steel box with glassfront for breeching inlet complete with locks andmaster keys as specified (breeching inlet measuredseparately) :
786 2-way. no $130.70 SJ250
787 4-way. no $147.50 SJ251
Breeching inlet complete with 1 no. 25mm diameterdrain valve including all necessary blank caps, chain,handwheel etc as specified:
788 100mm diameter 2-way. no $185.00 SJ253
789 150mm diameter 4-way. no $327.50 SJ254
790 Dry riser landing valve with instantaneous 63.5mmdiameter female coupling complete with gunmetal bodiesincluding anti-theft device consist of 3mm brass cap andear knob, and carbon steel pipe, etc as specified.
no $120.20 SJ252
791 25mm automatic air release valve as specified. no $26.20 SJ255
792 Approved canvas/nylon belt with key-alike padlocks forstrap locking handwheels in closed position.
no $4.80 SJ256
Page 86 of 100
HOUSING AND DEVELOPMENT BOARDSTANDARD SCHEDULE OF RATES FOR BUILDING WORKS (JUL 2013)
S/N DESCRIPTION UNIT RATE($) CODE
SANITARY, WATER AND GAS INSTALLATION (CONT'D)
1.6mm thick electro-galvanised steel casing finishedin baked red epoxy resin complete with all necessaryaccessories as specified for:
793 Fire hose-reel. no $207.10 SJ292
794 2.5 kg fire extinguisher. no $78.40 SJ342
795 4.5 kg fire extinguisher. no $86.00 SJ359
796 Approved wall mounted double swivel and recessed typefire hose-reel complete with 30m long x 25mm diameterreinforced braided rubber hose, a jet or spray type shut-off nozzle, gun metal control valves, wall brackets andfittings including fixing to wall and painting.
no $347.40 SJ291
Dry powder portable fire extinguisher complete withhorn, wall brackets and embossing extinguisher with2 nos HDB logo as specified:
797 2.5 kg. no $55.90 SJ338
798 4.5 kg. no $72.20 SJ339
799 9 kg. no $88.70 SJ340
800 5kg CO2 portable fire extinguisher complete with horn,wall brackets and embossing extinguisher with 2 nos HDB logo as specified.
no $174.20 SJ341
Page 87 of 100
HOUSING AND DEVELOPMENT BOARDSTANDARD SCHEDULE OF RATES FOR BUILDING WORKS (JUL 2013)
S/N DESCRIPTION UNIT RATE($) CODE
GLAZING
Sheet/float glass in panes:
801 4mm thick ordinary quality clear sheet/float glass. m² $27.40 SK001
802 5mm thick ditto. m² $33.20 SK002
803 6mm thick ditto. m² $36.50 SK003
804 5mm thick obscured glass. m² $41.80 SK004
Tinted float glass in panes:
805 5mm thick. m² $45.90 SK005
806 6mm thick. m² $49.80 SK006
Clear tempered float glass in panes:
807 6mm thick. m² $77.80 SK012
808 8mm thick. m² $104.70 SK013
809 10mm thick. m² $125.50 SK014
810 12mm thick. m² $143.50 SK015
Tinted tempered float glass in panes:
811 6mm thick. m² $89.10 SK016
812 8mm thick. m² $119.40 SK017
813 10mm thick. m² $137.50 SK018
814 12mm thick. m² $156.60 SK019
Tinted laminated safety float glass in panes:
815 10.38mm thick. m² $110.50 SK020
816 12.76mm thick. m² $145.40 SK021
Page 88 of 100
HOUSING AND DEVELOPMENT BOARDSTANDARD SCHEDULE OF RATES FOR BUILDING WORKS (JUL 2013)
S/N DESCRIPTION UNIT RATE($) CODE
GLAZING (CONT'D)
Glass in louvres - varying from 100mm to 200mmwide:
817 5mm thick ordinary clear sheet/float glass. m² $33.20 SK008
818 6mm thick ditto. m² $37.20 SK009
819 5mm thick obscured wired glass. m² $42.70 SK010
820 6mm thick rough cast obscured wired glass. m² $49.50 SK011
Page 89 of 100
HOUSING AND DEVELOPMENT BOARDSTANDARD SCHEDULE OF RATES FOR BUILDING WORKS (JUL 2013)
S/N DESCRIPTION UNIT RATE($) CODE
PAINTING AND DECORATING
Concrete or Plastered Surfaces
821 One coat of approved acrylic emulsion paint (with 20%water dilution).
m² $1.80 SL002
822 One priming coat (with 20% water dilution) and two uppercoats (without water dilution) of approved acrylic syntheticemulsion paint.
m² $4.40 SL003
823 One priming coat (with 20% water dilution) and one uppercoat (without water dilution) of approved acrylic syntheticemulsion paint by spraying equipment, paint roller orother means including protecting door/window frames, orother surfaces from being tainted with paint.
m² $3.20 SL037
824 One coat of water based sealer and two subsequentcoats of approved water based Algae Resistant EmulsionPaint (all coats without dilution) Rate inclusive of theprovision of a 6 year warranty.
m² $6.20 SL041
825 One coat of water based sealer. m² $1.90 SL008
Metal Surfaces
826 One coat of approved lead and chromate-free primer. m2 $4.10 SL038
827 One coat of polyvinyl butyral etching primer. m2 $3.50 SL039
828 One undercoat and one finishing coat of approvedsynthetic enamel paint.
m² $5.90 SL009
829 One undercoat and one finishing coat of approvedsynthetic enamel paint on grilles or railing etc (rateinclusive of painting on both faces).
m² $7.00 SL010
830 Two coats of approved synthetic enamel paint to mildsteel sections or door frame not exceeding 300mm girth.
m $2.20 SL018
831 Surface treatment to structural steelwork with one coat ofzinc-rich epoxy primer and two coats of zinc phosphatepriming paint including blast cleaning at workshop.
m² $42.30 SL040
Page 90 of 100
HOUSING AND DEVELOPMENT BOARDSTANDARD SCHEDULE OF RATES FOR BUILDING WORKS (JUL 2013)
S/N DESCRIPTION UNIT RATE($) CODE
PAINTING AND DECORATING (CONT'D)
Pipe Surfaces
One coat of approved lead and chromate-free primer:
832 not exceeding 75mm diameter. m $1.00 SL012
833 exceeding 75mm but not exceeding 150mm diameter. m $2.00 SL013
834 exceeding 150mm but not exceeding 300mm diameter.
m $4.10 SL014
Two coats of approved lead and chromate-freeprimer:
835 exceeding 75mm but not exceeding 150mm diameter. m $3.60 SL023
One coat of polyvinyl butyral etching primer:
836 not exceeding 75mm diameter. m $0.90 SL030
837 exceeding 75mm but not exceeding 150mm diameter. m $1.80 SL031
838 exceeding 150mm but not exceeding 300mm diameter.
m $3.50 SL032
Two coats of approved synthetic enamel paint:
839 not exceeding 75mm diameter. m $1.50 SL015
840 exceeding 75mm but not exceeding 150mm diameter. m $3.00 SL016
841 exceeding 150mm but not exceeding 300mm diameter.
m $6.00 SL017
Page 91 of 100
HOUSING AND DEVELOPMENT BOARDSTANDARD SCHEDULE OF RATES FOR BUILDING WORKS (JUL 2013)
S/N DESCRIPTION UNIT RATE($) CODE
PAINTING AND DECORATING (CONT'D)
Timber Surfaces
842 One coat wood primer and two coats of approvedsynthetic enamel paint.
m² $9.80 SL019
843 Two coats of wood stain/wood dye and three coats ofclear varnish/lacquer in matt or gloss finish.
m² $14.40 SL036
844 Two coats of wood preservative. m² $3.30 SL020
845 Two coats of polyurethane varnish. m² $6.90 SL022
Page 92 of 100
HOUSING AND DEVELOPMENT BOARDSTANDARD SCHEDULE OF RATES FOR BUILDING WORKS (JUL 2013)
S/N DESCRIPTION UNIT RATE($) CODE
TURFING, TREE PLANTING & LANDSCAPING WORKS
846 225x225mm spot turfing (with 25mm thick original topsoil) at 450mm centre both directions with a layer ofapproved soil mixture 125mm thick including themaintenance of the turfing works during the "MaintenancePeriod" as specified.
m² $7.10 SM002
847 Strip turfing (with 25mm thick original top soil) 450mmwide and spaced 600mm between strips at an angle of 45degree on embankments with a layer of approved soilmixture 125mm thick including the maintenance of theturfing works during the "Maintenance Period" asspecified.
m² $10.60 SM004
Close turfing (with 25mm thick original top soil) witha layer of approved soil mixture 125mm thickincluding the maintenance of the turfing works duringthe "Maintenance Period" as specified:
848 To slope embankment. m² $13.10 SM009
849 To flat level surface. m² $12.20 SM011
850 Excavate trench to form shrub/flower bed, includingbackfilling to level about 250mm above the adjacentground level with approved soil mixture as specified(plants measured separately).
m³ $47.40 SM018
Excavate tree hole including backfill to a level 250mmabove ground with approved soil mixture as specified(tree measured separately):
851 1.50 x 1.50 x 1.00m deep. no $104.90 SM078
852 1.00 x 1.00 x 1.00m deep. no $46.60 SM077
853 0.50 x 0.50 x 0.50m deep. no $6.60 SM079
Planting of instant tree including maintenance asspecified (tree measured separately):
854 Not exceeding 300mm girth. no $4.20 SM080
855 Exceeding 300mm but not exceeding 500mm girth. no $5.50 SM081
Page 93 of 100
HOUSING AND DEVELOPMENT BOARDSTANDARD SCHEDULE OF RATES FOR BUILDING WORKS (JUL 2013)
S/N DESCRIPTION UNIT RATE($) CODE
TURFING, TREE PLANTING & LANDSCAPING WORKS (CONT'D)
Planting of tree saplings/fruit trees/palms includingmaintenance as specified (tree measured separately):
856 Large size with minimun height 2.00m. no $3.50 SM082
857 Medium size with minimun height 1.50m. no $2.80 SM083
858 Small size with minimun height 1.00m. no $2.10 SM084
859 Planting of shrubs of any size including maintenance asspecified (shrub measured separately).
no $1.10 SM085
Cut down trees with girth measured at a point 1.0mabove the ground, grub up roots and clear away fromsite:
860 Not exceeding 0.5m girth. no $208.30 SM066
861 Exceeding 0.5m but not exceeding 1.0m girth. no $256.50 SM067
862 Exceeding 1.0m but not exceeding 1.5m girth. no $341.20 SM068
863 Exceeding 1.5m but not exceeding 2.0m girth. no $509.90 SM069
864 Exceeding 2.0m but not exceeding 2.5m girth. no $647.10 SM070
865 Exceeding 2.5m but not exceeding 3.0m girth. no $845.70 SM071
866 Exceeding 3.0m but not exceeding 4.0m girth. no $1,040.90 SM072
867 Exceeding 4.0m but not exceeding 5.0m girth. no $1,326.80 SM073
868 Exceeding 5.0m but not exceeding 6.0m girth. no $1,590.70 SM074
869 Bintangore pole as supporting stake to tree including tiesas specified.
m $1.50 SM039
870 Tripod support with 3 nos. of bintangore poles includingties and gunny sack as specified.
no $13.10 SM040
871 Tree guard with 4 nos. bintangore poles 1.50m aboveground and tied together with galvanised wire bracing asspecified.
no $21.90 SM041
872 Tree guard with 4 nos. bintangore poles 0.30m aboveground and tied together with galvanised wire bracing asspecified.
no $8.80 SM042
Page 94 of 100
HOUSING AND DEVELOPMENT BOARDSTANDARD SCHEDULE OF RATES FOR BUILDING WORKS (JUL 2013)
S/N DESCRIPTION UNIT RATE($) CODE
TURFING, TREE PLANTING & LANDSCAPING WORKS (CONT'D)
Approved perforated UPVC sub-soil pipe with openend butt joints:
873 100mm diameter. m $8.90 SM014
874 150mm diameter. m $12.60 SM013
875 150mm diameter wrapped round with geotextile fabric (non-woven type).
m $14.10 SM076
876 19 to 25mm coarse aggregate wrapped round withordinary grade geotextile fabric (non-woven type) toperforated UPVC pipe including all necessary excavation(pipe measured separately).
m³ $72.00 SM065
877 50mm diameter UPVC pipe as weephole not exceeding300mm long.
no $2.40 SM075
878 Supply, fix and subsequent removal of temporarybarricade fencing consisting of 50 x 50 x 1650mm longbalau timber post spaced at 2400mm centre to centre,pointed at bottom and driven 450mm deep into theground and with 10mm diameter nylon ropes runninghorizontally and diagonally across the top and bottom ofbarricade including extra timber strutting at corner andend post as specified.
m $4.60 SM015
Approved green nylon netting:
879 Single layer. m² $1.40 SM043
880 Double layer. m² $2.90 SM044
Page 95 of 100
HOUSING AND DEVELOPMENT BOARDSTANDARD SCHEDULE OF RATES FOR BUILDING WORKS (JUL 2013)
S/N DESCRIPTION UNIT RATE($) CODE
MISCELLANEOUS
881 Design, erection and subsequent removal of protectivehoarding with overhead shelter average 4.5m high and1.70m wide with timber supports, metal sheet hoardingand timber floor boarding as shown in drawings.
m $430.30 SM064
882 Natural anodised aluminium extruded framed noticeboard, size 1200 x 900mm high, constructed of 2mm thickaluminium casing, complete with 1 no. aluminium framedoor infilled with 5mm thick clear polycarbonate sheet,hinges, lockset, 12.7mm thick softboard with velvet fabricfinish, 9mm thick plywood, complete with fluorescent tubeand wiring as specified.
no $420.30 SM034
883 200 x 50mm Electro-Galvanised Steel Trunking withremovable cover for telephone cables fixed to wall orceiling complete with slotted brackets and fixingaccessories as specified.
m $22.20 SM035
884 200 x 75mm Electro-Galvanised Steel Trunking withremovable cover for telephone cables fixed to wall orceiling complete with slotted brackets and fixingaccessories as specified.
m $23.30 SM036
885 155mm diameter Class `B' UPVC pipe for undergroundLT reticulation cables with concrete haunching andnecessary fabric reinforcement at pipe joints including theprovision of a nylon/polyethelane rope and testing of pipeon completion (Excavation and sand bed measuredseparately).
m $18.60 SM050
886 Extra over 155mm diameter UPVC pipe for Grade 20concrete haunching throughout including all necessaryformwork and A6 WSF reinforcement (Excavationmeasured separately).
m $7.50 SM051
887 UPVC plugs at pipe mouth of 155mm diameter UPVCpipe in draw pits.
no $8.10 SM058
888 110mm diameter UPVC lead-in pipe in trench includingend cap (Trench measured separately).
m $6.20 SM063
889 172.4mm wide (nominal) x 2mm thick high impact UPVCcable cover plates with embossed letterings as specified.
m $3.10 SM052
Page 96 of 100
HOUSING AND DEVELOPMENT BOARDSTANDARD SCHEDULE OF RATES FOR BUILDING WORKS (JUL 2013)
S/N DESCRIPTION UNIT RATE($) CODE
MISCELLANEOUS (CONT'D)
Drawpits for underground LT reticulation cablescomprising of 100mm thick `L' shaped pc slabs aswalls, 100mm thick concrete base reinforced with A6WSF reinforcement, the pit filled with sand bags andcovered with 450x450x75mm thick precast concretetop cover slabs with UPVC plates for various shapesand types as specified (measured flat on plan -excavation measured separately):
890 Rectangular shaped. m² $174.20 SM053
891 `T' shaped. m² $141.00 SM054
892 `Y' shaped. m² $143.00 SM055
893 `X' shaped. m² $137.60 SM056
894 `L' shaped. m² $143.30 SM057
895 `R' shaped. m² $152.50 SM062
896 Vertical drawpit marker comprising of 75mm diameterheavy duty UPVC conduit pipe with purpose madecapping cover as specified.
no $32.20 SM059
StarHub Telecommunication Cable Pipes and Manholes
110mm diameter UPVC pipes in trench includingexcavation and backfilling and completelysurrounding pipe with grade 20 concrete bed andhaunching and all necessary formwork :
897 1-way with concrete bed and haunching, 210mm wide x overall 210mm thick.
m $30.00 SJ371
898 2-way with concrete bed and haunching, 346mm wide x overall 210mm thick.
m $46.00 SJ372
899 3-way with concrete bed and haunching, 346mm wide x overall 346mm thick.
m $63.70 SJ373
900 4-way with concrete bed and haunching, 346mm wide x overall 346mm thick.
m $68.20 SJ374
901 6-way with concrete bed and haunching, 481mm wide x overall 346mm thick.
m $90.80 SJ375
Page 97 of 100
HOUSING AND DEVELOPMENT BOARDSTANDARD SCHEDULE OF RATES FOR BUILDING WORKS (JUL 2013)
S/N DESCRIPTION UNIT RATE($) CODE
MISCELLANEOUS (CONT'D)
StarHub Telecommunication Cable Pipes and Manholes (Cont'd)
110mm diameter UPVC pipes in trench includingexcavation and backfilling and completelysurrounding pipe with grade 20 concrete bed andhaunching and all necessary formwork (cont'd):
902 9-way with concrete bed and haunching, 481mm wide x overall 481mm thick.
m $119.30 SJ376
903 12-way with concrete bed and haunching, 617mm wide x overall 481mm thick.
m $150.30 SJ377
Reinforced concrete grade 30 manhole includingnecessary reinforcement and formwork with 20mmthick screeding trowelled smooth to fall at base, leanconcrete, excavation, hardcore and the installation ofchannel bracket and anchor iron (cover and framemeasured separately):
904 Type JX2 comprising of 120mm thick walls and bottom slab.
no $335.60 SJ378
905 Type MX1 comprising of 150mm thick walls and bottom slab.
no $1,238.50 SJ379
906 Type MX2 comprising of 150mm thick walls and bottom slab.
no $1,525.60 SJ380
907 Type MX3 comprising of 230mm thick walls and bottom slab.
no $2,977.30 SJ381
908 Type MX4 comprising of 230mm thick walls and bottom slab.
no $3,617.90 SJ382
909 78mm thick grade 30 concrete top slab overall sizeapproximately 1316 x 1202mm inclusive of the collectionof manhole frame and cover from StarHub's warehouseand setting frame in cement mortar and sealing cover ingrease and sand (manhole cover and frame supplied byStarHub).
no $62.70 SJ499
Page 98 of 100
HOUSING AND DEVELOPMENT BOARDSTANDARD SCHEDULE OF RATES FOR BUILDING WORKS (JUL 2013)
S/N DESCRIPTION UNIT RATE($) CODE
DAYWORK
Rates for the following items do not includeestablishment charges and profit:
910 Bricklayer. hr $11.90 SN001
911 Blocklayer. hr $11.90 SN002
912 Carpenter. hr $13.40 SN003
913 Concretor. hr $12.50 SN004
914 Construction Equipment Operator. hr $15.80 SN019
915 Crane Driver. hr $16.70 SN005
916 Drainlayer. hr $12.40 SN006
917 Excavator. hr $15.80 SN007
918 Fitter. hr $14.40 SN008
919 Glazier. hr $12.60 SN009
920 Ironmonger. hr $12.90 SN010
921 Joiner. hr $12.80 SN011
922 Labourer. hr $8.60 SN012
923 Lorry Driver. hr $12.50 SN013
924 Mason. hr $11.90 SN014
925 Mechanic. hr $14.90 SN015
926 Painter. hr $11.70 SN016
927 Pavior. hr $12.20 SN017
928 Piler. hr $13.50 SN018
929 Plasterer. hr $12.20 SN020
930 Plumber. hr $12.80 SN021
931 Roller Driver. hr $17.30 SN022
Page 99 of 100
HOUSING AND DEVELOPMENT BOARDSTANDARD SCHEDULE OF RATES FOR BUILDING WORKS (JUL 2013)
S/N DESCRIPTION UNIT RATE($) CODE
DAYWORK (CONT'D)
Rates for the following items do not includeestablishment charges and profit (Cont'd):
932 Roofer. hr $12.70 SN023
933 Scaffolder. hr $12.70 SN024
934 Steel Bender & Fixer. hr $12.60 SN025
935 Steel Worker. hr $14.10 SN026
936 Tiler. hr $12.20 SN027
937 Tractor Driver. hr $16.00 SN028
938 Watchman. hr $10.70 SN029
939 Welder. hr $11.40 SN030
940 Wireman. hr $14.80 SN031
941 Air compressor with air delivery capacity not less than 4.5 cu m per minute including pneumatic and sharpening tools and power supply (operator measured separately).
hr $24.70 SN032
942 Concrete mixer 200/140 litres including fuel. hr $15.60 SN033
943 Concrete mixer 300/200 litres including fuel. hr $22.90 SN034
944 Crane (KATO KR20H) including fuel and driver. hr $118.10 SN050
945 Diesel powered field welding machine with minimum 300 amp.
hr $15.40 SN036
946 Mechanical lawn mover with blade not exceeding 500mm and engine power not exceeding 150 cc.
hr $2.50 SN037
947 Motor crane including fuel and driver (3 tonne lifting capacity).
hr $42.40 SN038
948 Motor Crane including fuel and driver (8-13 tonne lifting capacity).
hr $75.70 SN051
949 Motor lorry 2.5 - 3 tonne size including fuel and driver. hr $30.10 SN039
Page 100 of 100
HOUSING AND DEVELOPMENT BOARDSTANDARD SCHEDULE OF RATES FOR BUILDING WORKS (JUL 2013)
S/N DESCRIPTION UNIT RATE($) CODE
DAYWORK (CONT'D)
Rates for the following items do not includeestablishment charges and profit (Cont'd):
950 Motor lorry 5.5 - 7 tonne size including fuel and driver. hr $48.60 SN040
951 Motor lorry 10 tonne size including fuel and driver. hr $57.90 SN052
952 Power driven pump 50mm size including fuel and driver.
hr $21.50 SN041
953 Power driven pump 75mm size including fuel and driver.
hr $27.30 SN042
954 Power loader on rubber-tyred wheels 1.20 cu m bucket capacity (flywheel horsepower 60 kw range) including fuel and driver.
hr $69.70 SN043
955 Road roller 6 tonne capacity including fuel and driver. hr $36.30 SN044
956 Road roller 8 to 10 tonne capacity including fuel and driver.
hr $42.10 SN045
957 Traxacavator 1.0 cu m capacity including fuel and driver.
hr $84.80 SN046
958 Traxacavator 1.5 cu m capacity including fuel and driver.
hr $91.40 SN047
959 Traxacavator 2.0 cu m capacity including fuel and driver.
hr $112.90 SN048
960 Wheel or crawler shovel or excavator loaders with back hoe bucket not exceeding 0.4 cu m or 1.3 cu m loader bucket capacity including fuel and driver.
hr $80.60 SN049
HOUSING AND DEVELOPMENT BOARD
STANDARD SCHEDULE OF RATES
FOR
CIVIL ENGINEERING WORKS (JUL 2013)
CONTENTS
S/No. DESCRIPTION PAGE
GENERAL PREAMBLES 1 - 3
PARTICULAR PREAMBLES TO VARIOUS TRADES 4 - 15
1. PILING 16 - 18a) Reinforced Concrete Piles b) Timber Pilesc) Steel Sheet Pilesd) Bakau Piles
2. EXCAVATION 19 - 24a) Excavationb) Extra over excavationc) Timberingd) Backfillinge) Hardcore and Blindingf) Disposal
3. CONCRETE WORK 24 - 27a) Concreteb) Reinforcementc) Formwork
4. BRICKWORKS 27 - 28a) Brickworkb) Rubble Walls
5. CARPENTRY AND JOINERY 28
6. STRUCTURAL STEELWORK AND METALWORK 28 - 31a) Steelworkb) Handrailing/Vehicular Impact Guard Railsc) Gratingsd) Raised Platforme) Bollards
7 WALL/FLOOR FINISHES 32
8 PAINTWORK 32 - 37a) Concrete and Plastered Surfacesb) Timber Surfacesc) Metal Surfacesd) Road Markings
HOUSING AND DEVELOPMENT BOARD
STANDARD SCHEDULE OF RATES
FOR
CIVIL ENGINEERING WORKS (JUL 2013)
CONTENTS
S/No. DESCRIPTION PAGE
9 DRAINAGE WORKS 38 - 569.1 Sewersa) Blinding to Manhole baseb) Type A Section Granular Material c) Type B Section Concrete (Without Piling Base)d) Type B Section Concrete (With Piling Base)e) Type C Section Concrete (Without Piling Base) f) Type C Section Concrete (With Piling Base)g) Type D Section Concrete (Without piling Base)h) Type D Section Concrete (With Piling Base)i) Vitrified Clay Pipesj) UPVC Pipesk) RC Pipes Class 'H'l) RC Pipes Class 'M'm) Cast Iron Pipesn) Pipes in BackDrops/Tumbling Bayso) Concrete Rings and Surround to Manholep) Concrete Cover Slabs & PC Unit for Manholeq) Manhole Cover and Frame, Ladder, Railings, etcr) Other Works
9.2 Drainsa) Half Round and Composite Drain Channels and Block Drainsb) Drain Opening Cover slabs, Catch-Basin and Othersc) Sub-soil Pipes and Scupper Drainsd) Weepholese) Silt Traps, Water Trough & Vibration Access
10 ROADS AND PAVINGS 56 - 6210.1 Roadsa) Road Baseb) Bituminous Premix
10.2 Pavingsa) Concrete Paving Slabsb) BG Slabsc) Aeration Slabsd) Interlocking Concrete Paving Blockse) Expansion Jointsf) Kerbs, Dividers, etc.g) Pipe Crossings
HOUSING AND DEVELOPMENT BOARD
STANDARD SCHEDULE OF RATES
FOR
CIVIL ENGINEERING WORKS (JUL 2013)
CONTENTS
S/No. DESCRIPTION PAGE
11 SIGNAGES 63 - 70a) Directional Signsb) Traffic Signsc) Signboards
12 GATES AND FENCING 71 - 72a) Gatesb) Chain Link Fencingc) Temporary Fencing
13 SITE CLEARANCE, TURFING AND TREE-PLANTING 72 - 75a) Site Clearanceb) Turfingc) Tree Planting
14 REPAIR WORKS SECTION 76 - 78a) Break-up and Replacementb) Pothole Repairc) Cuttingd) Refixing handrailingse) Erasing Roadline and Markings
15 DAYWORKS 79 - 82a) Labour (excluding profit and overheads)b) Construction Equipment (excluding profit and overheads)
Published by Housing and Development Board, Republic of Singapore.
No part of this document may be reproduced or copied in any form or
by any means without the prior written permission of the publisher.
GENERAL PREAMBLES
Page 1 of 82
Introduction 1 The clauses in the General Preambles shall apply to all work items contained in
the Standard Schedule of Rates. 2 The Particular Preambles to each Trade shall be read in conjunction with the
respective Trade in the Standard Schedule of Rates. 3 All rates contained in the Standard Schedule of Rates are exclusive of any
Goods and Services Tax. Any such Goods and Services Tax shall be borne by the HDB as and when the same becomes due and payable.
4 All rates include the allowances for complying with the General and Particular
Preambles. 5 All rates contained in the Standard Schedule of Rates are fixed basic rates (in
Singapore Currency) and no amendment whatsoever shall be made to such rates. The tenderers shall be deemed to have closely studied all rates contained herein and duly noted their implications.
6 Unless otherwise stated, the term "as specified" means as specified in any of the
documents forming part of the Contract. 7 Where brand/trade names are given in the descriptions, they are solely intended
for fixing the rates of the items. The products and materials to be used in the Contract shall be governed by the Specifications, Drawings and other documents forming the Contract (and not this Schedule of Rates).
Principles of Measurement
8 Unless otherwise stated, all work shall be measured nett as fixed in its place. 9 Unless otherwise stated, pipes are described by their internal diameters. 10 Where minimum deductions of voids are dealt with in this document they shall
refer only to openings or voids which are within the boundaries of measured area. Openings or voids which are at the boundaries of measured area shall always be the subject of deductions irrespective of size.
11 Where an item is indicated as “Add to last item for each additional………
depth/height/cross sectional area/hour”, the figure as indicated in the item shall be applied even though the difference for any depth/height/cross sectional area/hour is less than the figure indicated.
Description of Works and Inclusions
12 All work, materials and goods described in this Standard Schedule of Rates shall be of the respective kinds described in the Contract and in accordance with the instructions of the Superintending Officer or the Superintending Officer's Representative.
GENERAL PREAMBLES
Page 2 of 82
13 Headings to groups of items shall be read as part of the descriptions of the items to which the headings apply. 14 Unless specifically stated otherwise, the following shall be deemed to be included
in the description of the item of work:
a) Labour and all costs in connection therewith including the labour in fabricating, assembling, setting, fitting and fixing of materials and goods in position.
b) Materials and goods including materials required for lapping, jointing and
the like and all costs in connection therewith such as delivery, unloading, storing, returning of packings, handling, hoisting and lowering.
c) Preparing surfaces to receive work.
d) Protecting materials and work.
e) Waste of materials.
f) All cutting and waste.
g) Use of construction equipment, tools, vehicles and all costs in connection
therewith.
h) Cleaning up on completion and making good all work disturbed.
i) General requirements set out in the Specifications, Drawings and other documents forming the Contract.
j) Establishment charges, overhead and profit.
Billing of Quantities
15 Where the unit of measurement is the linear metre, square metre and cubic metre, quantities shall be billed to the nearest whole unit. Fractions of the unit less than half shall be disregarded and all other fractions shall be regarded as a whole unit.
16 Where the unit of measurement is the kilogramme, quantities shall be billed to
the nearest whole unit. Fractions of a unit less than half shall be disregarded and all other fractions shall be regarded as a whole unit. Where the unit of billing is the tonne or litre, quantities shall be billed to the nearest two places of decimals.
17 Where the unit of measurement is the hour, fractions of the unit shall be billed to
the nearest next half hour. 18 Where the application of clauses 15 and 16 would cause an entire item to be eliminated, such item shall be billed to the nearest two places of decimals.
GENERAL PREAMBLES
Page 3 of 82
Application of Rates 19 Where rates with descriptions pertain to the same purpose are listed in more
than one Standard Schedule of Rates incorporated in the Contract; the rate as listed in the following schedules (in the stated order of precedence) shall prevail:
1st Precedence - Standard Schedule of Rates for Building Works
2nd Precedence - Standard Schedule of Rates for Civil Engineering
Works
3rd Precedence - Standard Schedule of Rates for Electrical Works
Units of Measurement 20 The following abbreviations are used for the units:
m - Linear metre m2 - Square metre m3 - Cubic metre no - Number p/tree - Per Tree job - Per Job kg - Kilogram ton - Tonne pr - Pair sht - Sheet ltr - Litre hr - Hour
PARTICULAR PREAMBLES TO VARIOUS TRADES
Page 4 of 82
1.0 PILING WORK
Generally 1.1 Piling work shall be executed in accordance with the relevant Specifications and
the instructions of Superintending Officer's Representative.
Rates 1.2 The rate of each type of piling work shall be deemed to include removal of
underground obstructions together with all work in connection therewith unless specifically otherwise provided.
1.3 The rate of each type of piling work shall be deemed to include extending piles,
dollying and connections unless specifically otherwise provided. 1.4 Redriving or intermittent driving necessitated by upheaving or lengthening of
piles or by the removal of obstructions under piles or other causes including moving and repositioning the piling frame shall be deemed to be included with the items of piling.
1.5 The rate of each item of piling shall be deemed to include:
a) Handling, pitching, heading, pointing and bracing and providing protective wrought iron ring or helmet to pile.
b) Cutting off surplus and heads of piles and preparing and integrating
reinforcement into pile caps where applicable, extra excavation, backfilling and disposal of debris.
c) Disposing of materials displaced arising out of driving the piles.
1.6 The rate of each item of treated timber piles includes the application of wood
preservative to cut off surfaces of piles. 1.7 The rate of each item of reinforced concrete piles includes moulds,
reinforcement, preparing heads and extra labour and materials to receive pile extensions.
1.8 The rate of each item of pile tests includes provision of all anchors, platforms,
loading and unloading of materials, instruments and monitoring of the tests. 1.9 The rate for providing and assembling the equipment on the site and the
subsequent dismantling and removal shall be given separately as an item. 1.10 Movement of piling frames into position and about the site, any necessary
excavation or filling required to place the frames, raising or lowering the frames and any staging, barges or the like required to support the frames, shall be deemed to be included with the item of piling.
PARTICULAR PREAMBLES TO VARIOUS TRADES
Page 5 of 82
Measurement 1.11 Payment for treated timber piles driven shall be the product of the relevant rate
per metre run and the penetration depth (measured from tip to cut-off level). 1.12 The pay length of each reinforced concrete pile after it is driven into the ground is
measured from the cut-off level of the pile to the end of pile shoe. Notwithstanding the provisions of Billing of Quantities contained in the General Preambles, the pay length of reinforced concrete piles shall be billed to the accuracy of nearest of 10mm.
2.0 EXCAVATION
Generally 2.1 Excavation of ordinary ground includes spoil or rubbish of every description,
rubbish tip material etc, sand gravel, decomposed granite, red or white earth, loamy or gravelly clay, gravelly laterite, mud, bog or any other formation by pick and shovel or machinery and at any depth.
Rates
2.2 The rate of each item of excavation shall be deemed to include excavating around foundation, piles and confined areas, getting out, removing of bakau piles, trimming, levelling and compacting bottoms of excavations and keeping sides plumb and planking and strutting (where stated).
2.3 Rates for each item shall be held to include for keeping all excavation free from
water and site dry, pumping or bailing and cable/services detection if required and providing any temporary drains required.
Measurement
2.4 The measurement of all excavations and subsequent disposal shall be those before excavating. The increase in bulk and any extra excavation required for earthwork support, planking and strutting and formwork for concrete shall be deemed to be included in the rates.
2.5 No allowance for working space shall be made in the measurement of all
excavation unless the method of construction requires workmen to operate from the outside of the structure. In such cases, a working space of 600mm shall be measured from the external face of the structure.
2.6 Filling shall be measured as equal to the void to be filled. Any thickness stated
shall be deemed to be after compacting.
PARTICULAR PREAMBLES TO VARIOUS TRADES
Page 6 of 82
2.0 EXCAVATION (CONT’D)
Timbering
Rates 2.7 The rate for each item of the timbering for the sewer trenches/manholes shall be
deemed to include the design of the timbering by a Professional Engineer when the depth of the excavation/trenches exceeds 4.00 metres.
3.0 CONCRETE WORK
Generally 3.1 Unless otherwise stated, rates for concrete, reinforcement and formwork shall be
applicable to all work irrespective of locality, positions, shapes and height.
Rates 3.2 The rate for each item of concrete shall be held to include the following:
a) Forming, cutting grooves, chases, mortices, holes and making good any other sundry items of a like nature.
b) Extra labour for laying to falls, or cambers and preparing surfaces to
receive screeds or pavings also to be included.
c) All tests on concrete, cement and aggregate etc, as required and compliance with the strengths as specified.
d) Tamping and/or vibrating to give thorough compaction; working between
and around reinforcements.
e) Laying on any type of sub-base; preparing and leaving surfaces to receive screeds or paving.
Measurement
3.3 No deduction shall be made in the measurement of concrete work for:
a) Voids of 0.05 cubic metre or less.
b) Volume of the reinforcement and steelwork.
c) Openings in walls, floor, roof slabs and the like of 0.10 square metre or less.
PARTICULAR PREAMBLES TO VARIOUS TRADES
Page 7 of 82
3.0 CONCRETE WORK (CONT'D) 3.4 Reinforcement
Rates 3.4.1 The rate of each item of reinforcement shall be deemed to include:
a) Allowances in the weight of reinforcement for rolling margins.
b) All cleaning and wire-brushing bars to remove rust, dust, mill scale, dirt, oil and other deleterious matters.
c) All bending, cutting and notching around obstructions.
d) All hooks and tying wires at all joints and crossings.
e) All non-designed spacers or chairs, distance blocks, temporary
fixings and supports. Measurement 3.4.2 The conversion factor for the various steel reinforcement bars shall be as
follows:
6mm diameter - 0.222 kg/m 7mm diameter - 0.302 kg/m 8mm diameter - 0.394 kg/m 9mm diameter - 0.499 kg/m 10mm diameter - 0.616 kg/m 13mm diameter - 1.042 kg/m 16mm diameter - 1.579 kg/m 20mm diameter - 2.466 kg/m 22mm diameter - 2.984 kg/m 25mm diameter - 3.854 kg/m 28mm diameter - 4.834 kg/m 32mm diameter - 6.313 kg/m
3.5 Fabric Reinforcement
Rates 3.5.1 The rate for each item of fabric reinforcement shall be held to include for
extra material at laps, tying wires and all bending, cutting and notching around obstruction.
Measurement
3.5.2 Only the nett area covered shall be measured and no deduction shall be made for opening less than 1.00 square metre.
PARTICULAR PREAMBLES TO VARIOUS TRADES
Page 8 of 82
3.0 CONCRETE WORK (CONT'D) 3.6 Formwork
Rates 3.6.1 The rate of each item of formwork shall be deemed to include:
a) All necessary boardings, supports, erecting, framing, cutting, perforations for pipes, angles, cleaning, wetting and treatment with mould oil, mould liquid or limewhite and the like.
b) All splayed edges, notchings, allowance for overlaps and passings at angles, battens, strutting, bolting, wedging, easing, striking and removal.
Measurement 3.6.2 Formwork shall be measured to the surface of work sloping more than 15
degree from the horizontal. 3.6.3 No deduction shall be made in measurement of formwork for:
a) Openings less than 1 square metre.
b) Intersection of main and secondary beams.
c) Intersection of beams and stanchion casing or columns. 3.7 Precast Work
Rates 3.7.1 The rate of each item of precast work shall be deemed to include concrete,
reinforcement, formwork including the formation and filling of pockets, holes, chases and recesses for anchors, bolts and the like, grouting, pointing of joints, surface finishes, delivery, unloading, hoisting, erecting, fixing including all necessary temporary erection gear, bracing and working platforms.
4.0 BRICKWORK
Rates 4.1 The rate for each item of block, brickwork shall be held to include for all
special made blocks, bricks and in-situ concrete in lieu, all holdfasts and bonding ties at abutments to concrete structures, all rough and fair cuttings, oversailing and receding courses, rough relieving and discharging arches, wedging and pining, raking out joints for and pointing flashings, bedding plates, parging and coring flues, labour eaves filling, plumbing angles, forming square and rebated reveals, cut squints or birdsmouths, notches, forming, leaving or cutting chases, holes and mortices, cutting and pining and making good and any other sundry items of a like nature.
PARTICULAR PREAMBLES TO VARIOUS TRADES
Page 9 of 82
4.0 BRICKWORK (CONT’D) Rates (Cont’d)
4.2 Rates for blockwork and brickwork shall be applicable to all work irrespective of positions, patterns, shapes and height.
Measurement
4.3 Deductions shall be measured the nett sizes of the openings and recesses, including the extra width or rebated reveals. No deductions shall be made for openings of 0.50 square metre or less.
4.4 Deductions shall be made for strings, sills, lintols and the like only when
exceeding 100mm in height. 5.0 CARPENTRY AND JOINERY
Description 5.1 The description of each item of carpentry work shall be deemed to include all
cutting, notching, boring, sinking, pelleting, fitting, trimming, mitring, halving, morticing, tenoning, dovetailing, scarfing, wedging and all ends, splayed edges, short lengths and temporary supports and any other sundry of a like nature and also all labour in forming, drilling for bolts and fixing in position complete with nails, screws or adhesives.
5.2 The description of each item of joinery work shall be deemed to include all
nailing, gluing, screwing, plugging, cutting, notching, holes, housing ends, mitring ends and shaped ends, angles, junctions, heading joints, short lengths, tongued angles, splayed or rounded edges, chamfers, rebates, grooves and any other sundry items of a like nature including stops and working cross-grain, fitting and hanging and the like.
6.0 STRUCTURAL STEELWORK AND METALWORK Description 6.1 The description of each item of work shall be deemed to include:-
a) Allowances for rolling margins and the weight of welding materials.
b) Shop and site fabrication including drilling, cutting (including holes and openings for other trades), notching, splicing, mitring, welding, riveting, bolting, machining ends and bearings, delivery, unloading, handling, assembling, hoisting, erecting, fitting and fixing in position, bedding, filling in solid, polishing and pointing including necessary lugs or other attachment.
PARTICULAR PREAMBLES TO VARIOUS TRADES
Page 10 of 82
6.0 STRUCTURAL STEELWORK AND METALWORK (CONT’D) c) Provision of all necessary construction equipment, temporary
bracing supports and the like required for erection, providing samples and tests required by the specification, the inspection of welds including the use of any special radio-graphic techniques.
d) Protection such as wrapping finished work with paper, coating with
grease or carrying out such other protective measures as may be required and removing and cleaning on completion.
e) Nuts and any type of washer which may be required.
f) Preparation of shop Drawings.
Deduction 6.2 No deduction shall be made for drillings, holes, notchings, splay cuts and
the like. Measurement
6.3 Weights stated shall be net theoretical weights. 6.4 Steel sections and plates in connections or fitted stiffeners, column cap
and base plates, rigid frame bases and butt plates, purlins, girts, eaves, fascias and similar cleats or brackets attached to trusses, lattice girders and open web joists and plates, and similar items shall be weighted at net dimensions.
6.5 Irregular, including circular shaped plates shall be weighted at the
smallest size rectangles from which they can be cut; regular and triangular shaped plates shall be weighted at net dimensions.
6.6 Half or other parts of steel sections in connections shall be weighted at
half the weight of the section from which they have been cut when equal to or less than half the section and at the full weight of the section from which they have been cut when greater than half the section.
PARTICULAR PREAMBLES TO VARIOUS TRADES
Page 11 of 82
7.0 WALL/FLOOR FINISHES
Rates 7.1 The rate for each item shall be deemed to include all temporary rules,
temporary grounds, temporary screeds and the like, cramps, dowels, ties, special metal supporting brackets and the like, cutting holes, notching and the like, masking, labour to internal angles other than coved angles, making good around pipes and the like, work in narrow widths and small quantities, joints between different types of work, joints between new and old work, internal angles, fair edges, rounded or chamfered edges or angles, quirks, grooves, V-joints, groin points and other intersections of curved surfaces, rounded coves and external angles not exceeding 25mm radius, necessary UPVC trimming pieces, mitres, stops and the like, and all making good and any other sundry items of a like nature.
7.2 Rate for each item shall also be deemed to include protecting surfaces from
the weather or building operations.
Measurement 7.3 No deduction shall be made for openings of 0.50 square metre or less. 7.4 In the measurement of plastering, no deduction shall be made for casings for
pipes under 300mm wide or angles which are finished in a different material if these do not exceed 100mm girth.
7.5 Work shall be deemed to be executed when scaffolding has been provided
during the course of construction. Should scaffolding be required separately just to execute the work, it would be paid as an extra item.
7.6 Where an item is described as “Add to (or deduct from)……for each 5mm
thickness over (or under)…….”, the difference for any thickness less than 5mm shall be paid/deducted based on 5mm thick.
8.0 PAINTWORK
Rates 8.1 The rate for each item of painting shall be held to include for all necessary
preparation of surfaces including cleaning off, knotting, stopping and sandpapering woodwork, wire brushing metal and leaving all surfaces free from dust, rust, grease and oil before painting, narrow widths, etc.
Measurement
8.2 No deduction shall be made for openings of 0.50 m2 or less. 8.3 Work shall be deemed to be executed when scaffolding has been provided
during the course of construction. Should scaffolding be required separately just to execute the work, it would be paid as an extra item.
PARTICULAR PREAMBLES TO VARIOUS TRADES
Page 12 of 82
9.0 DRAINAGE WORK
Measurement 9.1 Unless otherwise described, excavation, backfill and disposal of excavated
material shall be measured separately. 9.2 Piling, hardcore, lean concrete, sand bed and concrete haunching to drains,
sewers and culverts shall be measured separately. 9.3 The measurement of lengths of pipes shall be along their centre lines and
lengths of pipes in backdrops, tumbling bays, etc., shall be measured separately.
9.4 The measurement of pipes in trenches shall include lengths occupied by fittings and valves.
9.5 Unless otherwise stated, pipes are described by their internal diameters.
Rates 9.6 The rate of each item of concrete haunching shall be deemed to include
moulds, formwork, reinforcement, forming holes, rebates, notchings, mortices and recesses.
9.7 The rate of each item of pipes shall be deemed to include the following:
a) Laying of pipes in trenches or open ground to required falls.
b) Labour and material for cutting and jointing pipework.
c) Accessories such as joints, sockets, connectors, elbows, etc.
10.0 ROADS AND PAVINGS
Measurement 10.1 The thickness of materials used for road pavement shall be measured nett,
i.e. consolidated thickness after compaction. 10.2 No deductions shall be made in measurement of areas for manhole covers
less than 1 square metre.
Rates 10.3 Unless otherwise stated, excavation, backfilling and the subsequent removal
of surplus excavated material shall be measured separately. 10.4 The rate of each item of base course shall be deemed to include the
supplying, depositing, spreading, levelling, compacting, ramming and consolidating to the finished thickness.
PARTICULAR PREAMBLES TO VARIOUS TRADES
Page 13 of 82
10.0 ROADS AND PAVINGS (CONT’D) Rates (Cont’d)
10.5 The rate of each item of premix bituminous surfacing shall be deemed to include the following:-
a) Sweeping and brushing surface prior to applying tack coats or
asphalt surfacing.
b) Supplying and applying suitable tack coats wherever required.
c) Supplying and unloading of asphalt mixes as directed.
d) Supplying and laying by means of mechanical spreader/finisher,
rolling and finishing of asphalt mixes. e) Providing the necessary construction equipment, equipment, tools,
etc. and the subsequent removal upon completion. 10.6 The rate of each item of precast concrete kerbs, channels and drains shall
be deemed to include all necessary moulds, formwork, reinforcement and joints and cutting, all angles, intersections, ends, outlets, etc.
10.7 The rate for each item of precast concrete kerbs shall include for laying in
alignment and finishing fair on all exposed surfaces. 11.0 SIGNAGES
Measurement 11.1 The rate of each item of work for directional/traffic signs shall be deemed to
include foundations, supporting posts, excavation, preparation of surfaces, disposal of excavated material, upholding sides of excavation, backfilling, concrete, formwork, reinforcement and joints, etc.
PARTICULAR PREAMBLES TO VARIOUS TRADES
Page 14 of 82
12.0 GATES AND FENCING
Measurement 12.1 The measurement for lengths of fences shall exclude lengths occupied by
gates.
Rates 12.2 The rate for each item for fences shall be deemed to include the following:
a) Excavation, preparation of surfaces, disposal of excavated materials, upholding sides of excavation, backfilling, concrete, formwork and reinforcement.
b) Posts, End Posts, Angle Posts, Intermediate Posts, Straining Posts
and Gate Posts.
c) Drilling and cranking top of posts.
d) Trowelling top of concrete bases to a weathered finish. 13.0 SITE CLEARANCE, TURFING AND TREE-PLANTING
Definition of Approved Soil Mixture 13.1 Approved soil mixture shall be three parts topsoil with one part of soil
conditioner and 1 kg per m3 of granular fertilizer NPK (15:15:6.4) or 4:2:1 subsoil, unwashed sand and soil conditioner with 1 kg per m3 of granular fertilizer NPK (15:15:6.4).
Measurement 13.2 The measurement of girths of the trees shall be at a height of 1.0 metre
above ground.
Rates 13.3 The rate for cutting down trees shall be deemed to include for grubbing up
roots and filling of voids after removal of tree roots. 13.4 The rate of each item of turfing and planting shall be deemed to include for
watering, weeding, fertilizing, cutting, settlement, re-seeding and maintenance during the “Maintenance Period” as specified.
PARTICULAR PREAMBLES TO VARIOUS TRADES
Page 15 of 82
14.0 REPAIR WORKS SECTION
(a) Unless otherwise stated, the relevant particular preambles as hereinbefore described shall be applicable for the corresponding work items under this Section.
(b) Notwithstanding (a) above, for excavation works carried out under
Works Instructions, the rate for each item of excavation shall not include cable/services detection. The cable/services detection shall be paid separately by Works Instruction.
15.0 DAYWORKS
Rates 15.1 Rates shall be applicable in respect of all work executed on a daywork basis.
During the continuance of such work, the Contractor shall keep proper records of the names, occupations and working hours of all workmen employed for such work and the quantities and descriptions of all materials and construction equipment employed. Such records, receipts or vouchers must be verified by the Superintending Officer or the Superintending Officer's Representative before payment can be effected.
Page 16 of 82
HOUSING AND DEVELOPMENT BOARDSTANDARD SCHEDULE OF RATES FOR CIVIL ENGINEERING WORKS (JUL 2013)
S/N DESCRIPTION UNIT RATE ($) CODE
1. PILING
(a) Reinforced Concrete Piles
1.01 Providing and assembling of necessary piling equipmentto drive any size of reinforced concrete piles including allnecessary tools and appliances, subsequent dismantlingand removal on completion of the work on site.
item $4,585.60 Q042
Grade 40 precast reinforced concrete piles inclusiveof tools (providing, assembling and subsequentdismantling and removal of piling equipmentmeasured separately), materials and labour for theexecution thereof in any ground. Splices are to beapproved by the SO's Representative and paintedwith one coat of bitumen paint after welding. (The paylength is measured from the given cut off level of thepiles to the pointed end of the cast iron shoe orconcrete shoe):
1.02 150mm x 150mm (nominal working load of 20 tonne). m $23.90 SB305
1.03 175mm x 175mm (nominal working load of 30 tonne). m $30.50 SB089
1 04 200 200 ( i l ki l d f 40 t ) $35 60 SB0901.04 200mm x 200mm (nominal working load of 40 tonne). m $35.60 SB090
1.05 230mm x 230mm (nominal working load of 50 tonne). m $42.70 SB091
1.06 260mm x 260mm (nominal working load of 65 tonne). m $47.30 SB092
1.07 300mm x 300mm (nominal working load of 90 tonne). m $61.80 SB313
(b) Timber Piles
1.08 Providing and assembling of necessary piling equipmentto drive any size of treated timber piles including allnecessary tools and appliances, subsequent dismantlingand removal on completion of the work on site.
item $1,499.00 Q043
Page 17 of 82
HOUSING AND DEVELOPMENT BOARDSTANDARD SCHEDULE OF RATES FOR CIVIL ENGINEERING WORKS (JUL 2013)
S/N DESCRIPTION UNIT RATE ($) CODE
Tanalised timber vertical piles inclusive of tools(providing, assembling and subsequent dismantlingand removal of piling equipment measuredseparately), materials and labour for the executionthereof in any ground. The pay length to be measuredfrom the given cut-off level of the pile to the pointedend of the pile (price include mild steel box joint) forthe following sizes:
1.09 100mm x 100mm. m $10.70 Q004
1.10 125mm x 125mm (SWL 14T). m $16.50 Q005
1.11 150mm x 150mm (SWL 20T). m $22.90 Q006
1.12 175mm x 175mm (SWL 27T). m $34.10 Q007
(c) Steel Sheet Piles
1.13 Providing and assembling of necessary piling equipmentto drive/extract Grade 43 (BS 4360) steel sheet piles ofany size including all necessary tools and appliances,subsequent dismantling and removal on completion of thework on site.
item $8,159.30 SA032
1.14 Supply and delivery of Grade 43 (BS 4360) steel sheetpiles for use as temporary shoring to retain the sides of
ton $171.30 SA028piles for use as temporary shoring to retain the sides ofexcavation in approved section and lengths.
1.15 Driving Grade 43 (BS 4360) steel sheet piles includingthe provision of all labour, Construction equipment(providing, assembling and subsequent dismantling ofpiling equipment measured separately), tools andeverything necessary for the installation as specified.
ton $379.50 SA029
1.16 Extracting, recovering and stacking Grade 43 (BS 4360)steel sheet piles including the provision of all labour, tools(providing, assembling and subsequent dismantling ofpiling equipment measured separately), and everythingnecessary for the execution as specified.
ton $253.00 SA030
1.17 Grade 43 (BS 4360) steel sheet piles left in permanentlyincluding the provision of all labours, tools (providing,assembling and subsequent dismantling of pilingequipment measured separately), and everythingnecessary for the installation as specified.
ton $1,847.50 SA031
Page 18 of 82
HOUSING AND DEVELOPMENT BOARDSTANDARD SCHEDULE OF RATES FOR CIVIL ENGINEERING WORKS (JUL 2013)
S/N DESCRIPTION UNIT RATE ($) CODE
(d) Bakau Piles
1.18 Providing and assembling of necessary piling equipmentto drive any size of bakau piles including all necessarytools and appliances, subsequent dismantling andremoval on completion of the work on site.
item $980.40 Q045
Bakau piles minimum 80mm diameter at the largerend including cutting of piles (providing, assemblingand subsequent dismantling of piling equipmentmeasured separately):
1.19 Not exceeding 2.00m long. no $5.50 Q031
1.20 Exceeding 2.00m but not exceeding 4.00m long. no $9.30 Q032
1.21 Exceeding 4.00m but not exceeding 6.00m long complete with mild steel pipe sleeves.
no $18.10 Q033
1.22 Exceeding 6.00m but not exceeding 8.00m long ditto. no $23.10 Q034
Bakau piles minimum 80mm diameter at the largerend, by jacking method using excavator includingcutting of piles (rate inclusive of excavator):
1.23 Not exceeding 2.00m long. no $6.10 CE01001
1.24 Exceeding 2.00m but not exceeding 4.00m long. no $10.10 CE01002
1.25 Exceeding 4.00m but not exceeding 6.00m long complete with mild steel pipe sleeves.
no $19.10 CE01003
1.26 Exceeding 6.00m but not exceeding 8.00m long ditto. no $24.40 CE01004
1.27 Bakau piles minimum 80mm diameter at the larger end asroller supports.
m $1.80 Q030
(e) UPVC Pipes for Bored Piles
1.28 Approximately 16mm nominal internal diameter hollowUPVC pipe with a prelaid 3mm diameter wire inside theUPVC pipe within each cast in-situ pile.
m $2.00 CE01005
Page 19 of 82
HOUSING AND DEVELOPMENT BOARDSTANDARD SCHEDULE OF RATES FOR CIVIL ENGINEERING WORKS (JUL 2013)
S/N DESCRIPTION UNIT RATE ($) CODE
2. EXCAVATION
(a) Excavation
Excavation to formation level for roads, carparks,pavements, etc in ordinary ground including formingof surfaces and removing of surplus excavatedmaterials within site, for the following average overalldepth:
2.01 Not exceeding 150mm deep. m² $2.20 SA001
2.02 Exceeding 150mm but not exceeding 300mm deep. m² $3.80 SA002
2.03 Exceeding 300mm deep. m³ $11.60 SA003
2.04 Excavation only for the preparation of platform inordinary ground.
m³ $1.50 CE02003
2.05 Excavation for the preparation of platform in ordinaryground including filling and compaction to requiredplatform levels within site.
m³ $7.80 A094
2.06 Excavation in embankment commencing from reducelevel in ordinary ground including forming of surfaces andremoving of surplus excavated materials within site.
m³ $13.30 SA007
2 07 Excavate to form trial holes in ordinary ground not m³ $34 60 A0962.07 Excavate to form trial holes in ordinary ground notexceeding 2.00m deep and get out and return, fill in andram.
m $34.60 A096
2.08 Excavate to form trenches for drains, etc. in ordinaryground not exceeding 1.00m deep including formingbottom and get out, deposit on site, backfilling workingspace of trench with granular material/selected excavatedmaterial and cart away surplus excavated material fromsite.
m³ $19.70 A095
Page 20 of 82
HOUSING AND DEVELOPMENT BOARDSTANDARD SCHEDULE OF RATES FOR CIVIL ENGINEERING WORKS (JUL 2013)
S/N DESCRIPTION UNIT RATE ($) CODE
Excavate to form trenches for drains, etc. in ordinaryground including forming bottom and get out,deposit on site, planking and strutting, and backfillingworking space of trench with granularmaterial/selected excavated material and cart awaysurplus excavated material from site in stages of thefollowing depths:
2.09 Not exceeding 2.00m deep. m³ $27.30 A097
2.10 Exceeding 2.00m but not exceeding 4.00m deep. m³ $33.00 A098
2.11 Exceeding 4.00m but not exceeding 6.00m deep. m³ $36.90 A099
Excavate to form trenches for columns, pile caps,foundations, beams, basements, pier holes, etc. inordinary ground including forming of bottom,planking and strutting, part return, fill in and ram, andremainder get out and deposit on site as directed instages of the following depth:
2.12 Not exceeding 2.00m deep. m³ $26.30 SA008A
2.13 Exceeding 2.00m but not exceeding 4.00m deep. m³ $29.10 SA009A
2.14 Exceeding 4.00m but not exceeding 6.00m deep. m³ $33.60 SA010A
Excavate to form trenches for sewer lines manholesExcavate to form trenches for sewer lines, manholes,etc. in ordinary ground including forming bottom andget out, backfilling trench with granular material andcart away excavated material from site in stages ofthe following depths (timbering measuredseparately):
2.15 Not exceeding 2.00m deep. m³ $34.20 A100
2.16 Exceeding 2.00m deep but not exceeding 4.00m deep.
m³ $46.40 A101
2.17 Exceeding 4.00m deep but not exceeding 6.00m deep.
m³ $48.00 A102
2.18 Exceeding 6.00m deep but not exceeding 8.00m deep.
m³ $51.00 A103
2.19 Exceeding 8.00m deep. m³ $57.20 A104
Page 21 of 82
HOUSING AND DEVELOPMENT BOARDSTANDARD SCHEDULE OF RATES FOR CIVIL ENGINEERING WORKS (JUL 2013)
S/N DESCRIPTION UNIT RATE ($) CODE
Excavate to form trenches for service pipes, cablecrossings, etc. in ordinary ground including formingbottom and get out in stages of the following depths:
2.20 Not exceeding 2.00m deep and deposit on site. m³ $11.30 A105
2.21 Not exceeding 2.00m deep and cart away excavated material from site.
m³ $17.30 A106
2.22 Exceeding 2.00m deep but not exceeding 4.00m deep and deposit on site.
m³ $12.60 CE02001
2.23 Exceeding 2.00m deep but not exceeding 4.00m deep and cart away excavated material from site.
m³ $18.60 CE02002
(b) Extra over excavation
Extra over excavation for excavating/breaking upsurfaces to any depth using pneumatic tools etc:
2.24 Rock/reinforced concrete surfaces. m³ $71.90 A006
2.25 Metalled road surfaces. m³ $35.00 A007
2.26 Mass concrete surfaces. m³ $67.10 A008
(c) Timbering(c) Timbering
Open timbering for sewer trenches and manholesmeasured as supporting faces of excavations usingtype (I) timbering in stages of the following depths asshown in drawings (measured nett from drawings):
2.27 Not exceeding 2.00m deep. m² $11.30 A070
2.28 Exceeding 2.00m but not exceeding 4.00m deep. m² $11.40 A071
2.29 Exceeding 4.00m but not exceeding 6.00m deep. m² $12.60 A072
Open timbering for sewer trenches and manholesmeasured as supporting faces of excavations usingtype (II) timbering in stages of the following depths asshown in drawings (measured nett from drawings):
2.30 Not exceeding 2.00m deep. m² $13.10 A073
Page 22 of 82
HOUSING AND DEVELOPMENT BOARDSTANDARD SCHEDULE OF RATES FOR CIVIL ENGINEERING WORKS (JUL 2013)
S/N DESCRIPTION UNIT RATE ($) CODE
Open timbering for sewer trenches and manholesmeasured as supporting faces of excavations usingtype (II) timbering in stages of the following depths asshown in drawings (measured nett from drawings)(Cont'd):
2.31 Exceeding 2.00m but not exceeding 4.00m deep. m² $12.70 A074
2.32 Exceeding 4.00m but not exceeding 6.00m deep. m² $14.10 A075
Open timbering for sewer trenches and manholesmeasured as supporting faces of excavations usingtype (III) timbering in stages of the following depthsas shown in drawings (measured nett fromdrawings):
2.33 Not exceeding 2.00m deep. m² $15.60 A076
2.34 Exceeding 2.00m but not exceeding 4.00m deep. m² $14.90 A077
2.35 Exceeding 4.00m but not exceeding 6.00m deep. m² $16.40 A078
Close boarded timbering for sewer trenches andmanholes measured as supporting faces ofexcavations using type (IV) timbering in stages of thefollowing depths as shown in drawings (measurednett from drawings):
2.36 Not exceeding 2.00m deep. m² $22.30 A079
2.37 Exceeding 2.00m but not exceeding 4.00m deep. m² $17.10 A080
2.38 Exceeding 4.00m but not exceeding 6.00m deep. m² $18.90 A081
2.39 Exceeding 6.00m but not exceeding 8.00m deep. m² $20.60 A082
2.40 Exceeding 8.00m but not exceeding 10.00m deep. m² $22.40 A083
Close boarded timbering for sewer trenches andmanholes measured as supporting faces ofexcavations using type (V) timbering in stages of thefollowing depths as shown in drawings (measurednett from drawings):
2.41 Not exceeding 2.00m deep. m² $39.60 A084
2.42 Exceeding 2.00m but not exceeding 4.00m deep. m² $22.90 A085
Page 23 of 82
HOUSING AND DEVELOPMENT BOARDSTANDARD SCHEDULE OF RATES FOR CIVIL ENGINEERING WORKS (JUL 2013)
S/N DESCRIPTION UNIT RATE ($) CODE
Close boarded timbering for sewer trenches andmanholes measured as supporting faces ofexcavations using type (V) timbering in stages of thefollowing depths as shown in drawings (measurednett from drawings) Cont'd):
2.43 Exceeding 4.00m but not exceeding 6.00m deep. m² $25.30 A086
2.44 Exceeding 6.00m but not exceeding 8.00m deep. m² $27.60 A087
2.45 Exceeding 8.00m but not exceeding 10.00m deep. m² $30.00 A088
Close boarded timbering for sewer trenches andmanholes measured as supporting faces ofexcavations using type (VI) timbering in stages of thefollowing depths as shown in drawings (measurednett from drawings):
2.46 Not exceeding 2.00m deep. m² $52.70 A089
2.47 Exceeding 2.00m but not exceeding 4.00m deep. m² $32.30 A090
2.48 Exceeding 4.00m but not exceeding 6.00m deep. m² $35.70 A091
2.49 Exceeding 6.00m but not exceeding 8.00m deep. m² $39.10 A092
2.50 Exceeding 8.00m but not exceeding 10.00m deep. m² $42.40 A093
2.51 Extra over timbering for timber left in excavation asdirected including cutting runner below ground level all asrequired by the S.O.'s Rep. (Price to include for wedges,cleats, etc, measurements shall be taken from groundlevel to bottom of excavation. *Open/close timbering to bemeasured separately. This rate includes the omission ofthe extraction of timber left in).
m³ $272.80 A020
(d) Backfilling
Backfill excavated trench for service pipes, cablecrossings, etc including consolidation with:
2.52 Granular material. m³ $44.00 A107
2.53 Selected excavated material. m³ $9.70 A110
2.54 Imported earth. m³ $15.80 A109
Page 24 of 82
HOUSING AND DEVELOPMENT BOARDSTANDARD SCHEDULE OF RATES FOR CIVIL ENGINEERING WORKS (JUL 2013)
S/N DESCRIPTION UNIT RATE ($) CODE
(e) Hardcore and Blinding
Filling including consolidation as directed:
2.55 Hardcore. m³ $27.70 I005
2.56 Granite dust. m³ $61.60 A108
2.57 Granite chippings. m³ $60.70 I008
2.58 Unwashed sand bed. m³ $64.50 SA020
(f) Disposal
2.59 Cart away surplus excavated material from site of thework including transport and all charges.
m³ $11.90 SA016
3. CONCRETE WORK
(a) Concrete
3.01 Grade 15 concrete to underside of foundations, bases,slabs, etc.
m³ $146.30 I016
Concrete benching to base of drain finished to fallstowards precast inverts including trowelling all asspecified:
3.02 Grade 20. m³ $170.20 CE03029
3.03 Grade 25. m³ $172.60 CE03030
3.04 Grade 30. m³ $177.00 CE03011
Concrete in foundations, bases, walls, backdrops,tumbling bays, etc:
3.05 Grade 20. m³ $148.70 I017
3.06 Grade 25. m³ $151.00 I018
3.07 Grade 30. m³ $155.50 I019
3.08 Grade 35. m³ $157.90 I045
3.09 Grade 40. m³ $161.50 I044
Page 25 of 82
HOUSING AND DEVELOPMENT BOARDSTANDARD SCHEDULE OF RATES FOR CIVIL ENGINEERING WORKS (JUL 2013)
S/N DESCRIPTION UNIT RATE ($) CODE
(b) Reinforcement
Mild steel rod reinforcement including all bending,cutting and waste and fixing:
3.10 6mm diameter. kg $2.50 SB022
3.11 8mm diameter. kg $2.40 SB154
3.12 10mm diameter. kg $2.20 SB023A
3.13 13mm diameter. kg $2.20 SB024A
3.14 16mm diameter. kg $2.10 SB025
3.15 20mm diameter. kg $1.90 SB026A
3.16 25mm diameter. kg $1.90 SB028
Deformed high tensile steel rod reinforcementincluding all bending cutting and waste and fixing:
3.17 10mm diameter. kg $2.10 CE03016
3.18 13mm diameter. kg $2.10 CE03017
3.19 16mm diameter. kg $2.10 CE03018
3.20 20mm diameter. kg $1.80 CE03019
3.21 22mm diameter. kg $1.90 CE03020
3.22 25mm diameter. kg $1.80 CE03021
3.23 28mm diameter. kg $1.80 CE03022
3.24 32mm diameter. kg $1.80 CE03023
3.25 Extra over steel rod reinforcement for galvanising. kg $0.70 SB039
Page 26 of 82
HOUSING AND DEVELOPMENT BOARDSTANDARD SCHEDULE OF RATES FOR CIVIL ENGINEERING WORKS (JUL 2013)
S/N DESCRIPTION UNIT RATE ($) CODE
Welded steel fabric reinforcement well lapped andtied at joints (measured nett):
3.26 A5 m² $4.00 SB040A
3.27 A6 m² $5.00 SB041
3.28 A7 m² $6.50 SB042
3.29 A8 m² $8.00 SB043
3.30 A9 m² $9.80 CE03001
3.31 A10 m² $12.20 SB145A
3.32 B5 m² $6.90 SB146
3.33 B6 m² $8.00 SB147
3.34 B7 m² $9.00 SB148A
3.35 B8 m² $11.80 SB149A
3.36 B9 m² $13.90 SB229
3.37 B10 m² $15.80 SB150
3.38 B11 m² $18.30 CE03010$
3.39 B12 m² $20.80 SB151
3.40 B13 m² $26.10 CE03002
3.41 D5 m² $7.20 CE03006
3.42 D6 m² $9.30 SB048
3.43 D7 m² $12.00 SB049
3.44 D8 m² $15.40 SB124
3.45 D9 m² $19.20 SB230
3.46 D10 m² $23.80 SB231
3.47 D11 m² $28.50 CE03007
3.48 D12 m² $34.00 CE03008
3.49 D13 m² $39.90 CE03009
3.50 Galvanised finemesh (grid size 25mm x 25mm x 1.5mm thick).
m² $7.70 CE03028
Page 27 of 82
HOUSING AND DEVELOPMENT BOARDSTANDARD SCHEDULE OF RATES FOR CIVIL ENGINEERING WORKS (JUL 2013)
S/N DESCRIPTION UNIT RATE ($) CODE
Double wire welded steel fabric reinforcement welllapped and tied at joints (measured nett):
3.51 DA 10d/10. m² $28.40 CE03024
3.52 DA 13d/10. m² $43.50 CE03025
3.53 EA 10d/10. m² $21.50 CE03026
3.54 EA 13d/10. m² $31.80 CE03027
(c) Formwork
3.55 Shuttering to sides and soffits of concrete. m² $27.70 G005
4. BRICKWORKS
(a) Brickwork
Brickwork in standard common bricks (size 215mm x102.5mm x 65mm) laid in cement and sand mortar(1:3) with 10mm joints raked 10mm deep or flushpointed as work proceeds:
4.01 Mass brickwork generally. m³ $257.60 L005
4.02 One and half thick wall. m² $131.20 G011
4.03 One brick thick wall to chambers, access shaft, etc. m² $87.50 G010
4.04 One brick thick wall. m² $68.10 L006
4.05 Half brick thick wall reinforced with expanded metal brickwork reinforcement.
m² $36.00 L007
Common brickwall using M211 modular bricks size190x90x90mm laid in masonry cement and sand (1:3)mortar as specified with 10mm joints raked 10mmdeep or flush pointed as the work proceeds:
4.06 190mm thick. m² $63.90 SC015A
4.07 290mm thick. m² $87.10 SC044A
4.08 190mm wide Brick-on-edge red bull-nosed brick kerbusing 190x90x90mm thick red facing modular bricksjointed and pointed in cement and sand mortar (1:3) asspecified (screed measured separately).
m $22.20 SD054A
Page 28 of 82
HOUSING AND DEVELOPMENT BOARDSTANDARD SCHEDULE OF RATES FOR CIVIL ENGINEERING WORKS (JUL 2013)
S/N DESCRIPTION UNIT RATE ($) CODE
(b) Rubble Walls
4.09 Sledge granite set in cement and sand mortar (1:3) inabutments, retaining walls, to drains, rivers etc.
m³ $119.40 L001
4.10 Ditto but in walling, fair-faced and pointed in plain orcoloured cement.
m³ $133.70 L002
5. CARPENTRY AND JOINERY
Supply only approved well seasoned timber inconstructional members, scantlings, railings,deckings, etc cut to the forms and sizes required:
5.01 Kapoh or Balau (wrot timber). m³ $932.30 N015
5.02 Keruing (sawn timber). m³ $619.90 N016
5.03 Kempas (sawn timber). m³ $789.40 N017
5.04 Extra over timber for tanalising. m³ $202.40 N018
5.05 Extra over timber only for fixing. m³ $441.60 N019
6. STRUCTURAL STEELWORK AND METALWORK
(a) Steelwork
Mild steel flats, angles, tees, channels, hollowsections, square sections, rivets and bolts, etc. of anysize fabricated and fixed including welding or bolting,and painting with one coat of primer:
6.01 Grade 43A for structural steelwork only. kg $6.80 SH018A
6.02 For non-structural steelwork only. kg $5.60 SH019A
(b) Railings/Vehicular Impact Guard Rails
6.03 Aluminium alloy railing Type 'A' of 1000mm height with25mm diameter jail bars at 120mm centres and75x75mm barrier post at 1500mm centres embedded inand including concrete footing as shown in drawings.
m $284.60 CE07007
Page 29 of 82
HOUSING AND DEVELOPMENT BOARDSTANDARD SCHEDULE OF RATES FOR CIVIL ENGINEERING WORKS (JUL 2013)
S/N DESCRIPTION UNIT RATE ($) CODE
6.04 Aluminium alloy railing Type 'B' of 1000mm height with20mm diameter jail bars at 120mm centres and 54x54mmbarrier post at 1500mm centres embedded in andincluding concrete footing as shown in drawings.
m $215.10 CE07008
6.05 Aluminium alloy railing Type 'C' of 700mm height with20mm diameter jail bars at 300mm centres and 54x54mmbarrier post at 1500mm centres embedded in andincluding concrete footing as shown in drawings.
m $139.20 CE07009
6.06 Aluminium alloy railing Type 'D' of 1200mm height with20mm diameter jail bars at 120mm centres and 54x54mmbarrier post at 1500mm centres embedded in andincluding concrete footing as shown in drawings.
m $227.70 CE07010
6.07 Extra over aluminium alloy railing (all types) for fixing toconcrete structures complete with aluminium baseplate/case and stainless steel bolts as shown indrawings.
m $38.00 CE07011
6.08 40mm diameter nominal bore carbon steel standardsafety railing with 12mm square bars at 150mm centre tocentre including galvanising, Grade 20 concrete footingand painting as shown in drawings.
m $169.30 M046
6.09 Hot-dipped galvanised vehicular impact guard railcomplying with the requirements of AASHTODesignation:M 180 including 150mm x 110mm x 18mm x
m $90.10 M019
4.3mm thick galvanised 'C' channel posts spaced at 4.0metre centres to centres with concrete surround to detailsas shown in drawings.
6.10 Ditto but using 150mm x 150mm x 6mm SHS steel postsspaced at 2.0 metre centre to centre and to details asshown in drawings.
m $282.50 M020
(c) Gratings
6.11 3mm thick hot-dipped galvanised mild steel chequer plateincluding all necessary cutting and welding to mild steelworks.
m² $145.50 M040
Page 30 of 82
HOUSING AND DEVELOPMENT BOARDSTANDARD SCHEDULE OF RATES FOR CIVIL ENGINEERING WORKS (JUL 2013)
S/N DESCRIPTION UNIT RATE ($) CODE
6.12 Hot-dipped galvanised mild steel hinged grating overall41mm thick fabricated with 4.5mm x 25mm intermediateflats welded with 3mm thick galvanised mild steelCHEQUER PLATE on top resting on 2 nos. of 10mmdiameter cross bar and supported on 64mm x 45.5mm x4.5mm galvanised mild steel flat bend angle plateanchored to structure with fish tail as shown in drawings(for roadside and outlet drains).
m² $543.20 M027
6.13 Hot-dipped galvanised mild steel hinged grating overall47mm thick fabricated with 6mm x 32mm intermediateflats spaced at approximately 95mm centres with 3mmthick galvanised mild steel CHEQUER PLATE on top andresting on 5 nos. of 12mm diameter m.s. bar supportsand 75mm x 50mm x 7mm m.s. angle frame anchored tostructure with fishtails to details as shown in drawings(for 2m to 4m wide outlet drain).
m² $460.90 M045
6.14 Hot-dipped galvanised m.s. hinged vehicular gratingoverall 65mm thick fabricated with 12mm dia. m.s. barsspaced at 85mm centres, 9mm x 65mm m.s. flats at30mm centres and support on 75mm x 75mm x 9mm m.s.angle frame anchored to structure with fishtails to detailsas shown in drawings.
m² $1,291.90 M030
6.15 Ditto but with 12mm dia m.s. bars spaced at 120mmcentres and 9mm x 65mm m.s. flats at 35mm centres andto details as shown in drawings.
m² $1,083.60 M031
6.16 3-piece hot-dipped galvanised mild steel hinged vehiculargrating overall 32mm thick fabricated with 9mm x 32mmthick intermediate m.s. flats with 10mm diameter m.s. barsupports on 64mm x 38mm x 4.5mm thick m.s. angleframe to details as shown in drawings (forcarparks/service roads).
m² $695.60 M032
6.17 3-piece hot-dipped galvanised mild steel hinged vehiculargrating overall 35mm thick fabricated with 9mm x 32mmthick intermediate m.s. flats and 3mm thick CHEQUEREDPLATE welded to top of centre piece and 10mm diameterm.s. bar supports and 64mm x 38mm x 4.5mm thick m.s.angle frame to details as shown in drawings (forcarparks/service roads).
m² $736.50 M050
Page 31 of 82
HOUSING AND DEVELOPMENT BOARDSTANDARD SCHEDULE OF RATES FOR CIVIL ENGINEERING WORKS (JUL 2013)
S/N DESCRIPTION UNIT RATE ($) CODE
6.18 2-piece hot-dipped galvanised mild steel hinged vehiculargrating overall 32mm thick fabricated with 9mm x 32mmthick intermediate m.s. flats with 10mm diameter m.s. barsupports on 38mm x 38mm x 6mm thick m.s. angle frameto details as shown in drawings (for service roads).
m² $663.10 CE07005
6.19 Mild steel grating to manhole of storm water pipe conduitoverall size 836mm x 676mm fabricated with 26mm x6mm thick and 32mm x 6mm thick flats with 2nos 13mmdiameter mild steel rods all welded together and 38mm x38mm x 6mm thick angle frame with lugs cast intoconcrete to details as shown in drawings.
no $215.80 CE07001
(d) Raised Platform
6.20 Raised steel platform wash-bay, overall size 9000mm x3500mm wide consisting of rolled steel joists supports asframing to receive used sheet pile sections all weldedtogether to details as shown in drawings (concretepavement and water pump measured separately).
no $1,472.70 CE07002
(e) Bollards
6.21 90mm diameter x 3.2mm thick hollow section hot-dippedgalvanised mild steel detachable pipe bollard, 900mmhigh above ground with concrete footing and secure to
no $148.10 CE07006
high above ground with concrete footing and secure tom.s. fish-tail attached to the footing with a padlockincluding necessary painting and excavation as shownin drawings.
6.22 100mm diameter mild steel detachable pipe bollard900mm high above ground with footing includingnecessary painting and excavation as shown indrawings.
no $67.80 M039
6.23 230mm diameter R.C. bollard 1050mm high aboveground with footing and m.s. reinforcements includingnecessary excavation as shown in drawings.
no $70.90 M023
6.24 150mm diameter x 150mm high precast concrete bollardwith 1no of T20mm diameter (200mm long) steel barincluding bedding in cement mortar 1:3 and paintingsurfaces with two coats of approved yellow fluorescentpaint.
no $13.10 CE11025
6.25 6mm diameter galvanised electrically welded steel linkchains polished and self coloured.
m $3.90 M024
6.26 Supply of 60mm Yale padlock complete with keys orother approved equivalent.
no $25.00 M052
Page 32 of 82
HOUSING AND DEVELOPMENT BOARDSTANDARD SCHEDULE OF RATES FOR CIVIL ENGINEERING WORKS (JUL 2013)
S/N DESCRIPTION UNIT RATE ($) CODE
7. WALL/FLOOR FINISHES
7.01 One coat of approved 'Protective Coating' to inner wallsurface of box culvert.
m² $5.60 CE08001
7.02 Extra over concrete slab for trowelling floor surface. m² $1.60 SD002A
7.03 20mm thick cement and sand (1:3) rendering to brickworkor concrete trowelled smooth with steel trowel.
m² $17.60 L008
7.04 ADD to (or deduct from) LAST ITEM for each 5mmthickness over (or under) 20mm.
m² $1.60 L009
7.05 20mm thick cement and sand (1:2) rendering to invertsand benchings. (Measured on plan).
m² $12.30 G014
7.06 ADD to (or deduct from) LAST ITEM for each 5mmthickness over (or under) 20mm (Measured on plan).
m² $2.00 G065
7.07 20mm thick granolithic paving consisting of cement, sandand granite chippings (1:1:2) to floor and trowelled to asmooth finish.
m² $12.20 SD019A
7.08 ADD to (or deduct from) LAST ITEM for each 5mmthickness over (or under) 20mm.
m² $2.50 SD020A
8. PAINTWORK
(a) Concrete and Plastered Surfaces
8.01 One coat of approved synthetic gloss enamel paint tokerbs, dividers, bollards.
m² $7.90 O065
8.02 One coat of primer sealer and one coat of approvedsynthetic gloss enamel paint to kerbs, dividers andconcrete bollards.
m² $8.50 CE09020
8.03 One coat of approved emulsion paint to concretesurfaces, parapet walls, etc.
m² $1.60 O066
(b) Timber Surfaces
8.04 Two coats of approved wood preservative on wood work. m² $3.50 N025
8.05 Stop, knot with spirit knotting varnish, prime with one coatwood primer and paint two coats of approved syntheticenamel paint on woodwork.
m² $9.80 N026
Page 33 of 82
HOUSING AND DEVELOPMENT BOARDSTANDARD SCHEDULE OF RATES FOR CIVIL ENGINEERING WORKS (JUL 2013)
S/N DESCRIPTION UNIT RATE ($) CODE
(c) Metal Surfaces
8.06 Brush with steel wire brush to remove all rust, prepareand apply one coat of lead and chromate free primer orzinc chromate primer and two coats of approved syntheticenamel paint on steel and iron-work (girth measurement).
m² $8.00 N022
8.07 Brush with steel wire brush to remove all rust, prepareand apply one coat of lead and chromate free primer orzinc chromate primer and two coats aluminium paint onsteel and iron-work (girth measurement).
m² $7.30 N023
8.08 Brush with steel wire brush to remove all rust, prepareand apply one coat of lead and chromate free primer orzinc chromate primer and two coats red lead oxide painton steel and iron-work, one coat before and the otherafter erection (girth measurement).
m² $7.20 N024
(d) Road Markings
White thermoplastic paint 1.5mm thick forlongitudinal road markings to the following widthsand spacings as shown in drawings or as directedincluding cleaning and preparation of road surface,setting out and aligning road markings, apply primercoat at the rate of 220 gm per m² apply drop onballotini glass beads at the rate of 300 ± 50 gm/m² forsurface reflectorization, and everything else asdescribed in the Specifications and other relateddocuments of the Contract:
8.09 100mm wide lines. m $2.00 O014
8.10 150mm wide lines. m $2.80 O016
8.11 200mm wide lines. m $4.10 O017
8.12 300mm wide lines. m $4.70 O018
8.13 Other road markings exceeding 300mm wide. m² $15.60 O019
Page 34 of 82
HOUSING AND DEVELOPMENT BOARDSTANDARD SCHEDULE OF RATES FOR CIVIL ENGINEERING WORKS (JUL 2013)
S/N DESCRIPTION UNIT RATE ($) CODE
Yellow thermoplastic paint 1.5mm thick forlongitudinal road markings to the following widthsand spacings as shown in drawings or as directedincluding cleaning and preparation of road surface,setting out and aligning road markings, apply primercoat at the rate of 220 gm per m² apply drop onballotini glass beads at the rate of 300 ± 50 gm/m² forsurface reflectorization, and everything else asdescribed in the Specifications and other relateddocuments of the Contract:
8.14 100mm wide lines. m $2.00 O020
8.15 150mm wide lines. m $2.90 O021
8.16 100mm wide zig-zag lines (measured straight along the edge of road/kerb).
m $2.70 CE09008
8.17 200mm wide lines. m $4.30 O022
8.18 300mm wide lines. m $5.60 O023
8.19 455mm wide lines. m $7.70 O024
Thermoplastic paint 2mm thick for road markings tothe following widths and spacings as shown indrawings or as directed including cleaning andpreparation of road surface setting out and aligningpreparation of road surface, setting out and aligningroad markings, apply primer coat at the rate of 220gm per m² apply drop on ballotini glass beads at therate of 300 ± 50 gm/m² for surface reflectorization,and everything else as described in theSpecifications and other related documents of theContract:
8.20 1800mm wide road hump with 150mm wide transverse yellow lines spaced at 200mm apart.
m $20.10 CE09002
8.21 4000mm wide road hump with ditto. m $29.60 CE09003
Page 35 of 82
HOUSING AND DEVELOPMENT BOARDSTANDARD SCHEDULE OF RATES FOR CIVIL ENGINEERING WORKS (JUL 2013)
S/N DESCRIPTION UNIT RATE ($) CODE
White thermoplastic paint 3mm thick for longitudinalroad markings to the following widths and spacingsas shown in drawings or as directed includingcleaning and preparation of road surface, setting outand aligning road markings, apply primer coat at therate of 220 gm per m² apply drop on ballotini glassbeads at the rate of 300 ± 50 gm/m² for surfacereflectorization, and everything else as described inthe Specifications and other related documents of theContract:
8.22 200mm wide lines. m $4.50 O025
8.23 300mm wide lines. m $6.40 O026
8.24 Single traffic arrows. no $42.30 O027
8.25 Double traffic arrows. no $52.80 O028
8.26 Triple traffic arrows. no $64.20 O029
8.27 Merging traffic arrows. no $58.50 CE09007
8.28 Standard letterings/markings 2520mm height. no $37.40 CE09012
8.29 Standard letterings/markings 310mm height. no $18.40 CE09014
8 30 Standard alphanumeric characters 180mm height no $15 90 CE090168.30 Standard alphanumeric characters 180mm height. no $15.90 CE09016
8.31 Pedestrian crossing and other road marking exceeding 300mm wide.
m² $21.50 O032
Page 36 of 82
HOUSING AND DEVELOPMENT BOARDSTANDARD SCHEDULE OF RATES FOR CIVIL ENGINEERING WORKS (JUL 2013)
S/N DESCRIPTION UNIT RATE ($) CODE
Yellow thermoplastic paint 3mm thick for longitudinalroad markings to the following widths and spacingsas shown in drawings or as directed includingcleaning and preparation of road surface, setting outand aligning road markings, apply primer coat at therate of 220 gm per m² apply drop on ballotini glassbeads at the rate of 300 ± 50 gm/m² for surfacereflectorization, and everything else as described inthe Specifications and other related documents of theContract:
8.32 200mm wide lines. m $4.80 O033
8.33 300mm wide lines. m $7.10 O034
8.34 455mm wide lines. m $10.80 O035
8.35 Single traffic arrows. no $40.30 CE09004
8.36 Double traffic arrows. no $56.90 CE09005
8.37 Triple traffic arrows. no $69.60 CE09006
8.38 Merging traffic arrows. no $59.20 CE09021
8.39 Standard letterings/markings 2520mm height. no $37.40 CE09013
8 40 Standard letterings/markings 310mm height no $18 40 CE090158.40 Standard letterings/markings 310mm height. no $18.40 CE09015
8.41 Standard alphanumeric characters 180mm height. no $15.90 CE09017
8.42 Road markings exceeding 455mm wide. m² $23.00 O038
8.43 White thermoplastic paint 8mm thick x 300mm wide forforming regulating strips as shown in drawings or asdirected on site including cleaning and preparation ofroad surface, setting out and aligning road markings,apply primer coat at the rate of 220gm per m² apply dropon ballotini glass beads at the rate of 300 ± 50 gm/m² forsurface reflectorization, and everything else as describedin the Specifications and other related documents of theContract.
m $19.80 CE09001
Page 37 of 82
HOUSING AND DEVELOPMENT BOARDSTANDARD SCHEDULE OF RATES FOR CIVIL ENGINEERING WORKS (JUL 2013)
S/N DESCRIPTION UNIT RATE ($) CODE
One coat of white colour quick drying chlorinatedrubber based approved road line paint withmechanical means on:
8.44 Pedestrian or zebra crossings and other road markings exceeding 300mm wide.
m² $14.50 O054
8.45 100mm wide lines. m $1.50 O055
8.46 150mm wide lines. m $2.20 O056
8.47 200mm wide lines. m $2.90 O057
8.48 300mm wide lines. m $4.40 O058
8.49 Single traffic arrows. no $14.70 CE09023
8.50 Double traffic arrows. no $20.30 CE09024
8.51 Triple traffic arrows. no $26.60 CE09025
8.52 Merging traffic arrows. no $18.10 CE09022
8.53 Standard letterings/markings 2520mm height. no $25.20 CE09009
8.54 Standard letterings/markings 1000mm height. no $16.00 CE09019
8.55 Standard letterings/markings 310mm height. no $9.90 CE09010
8.56 Standard alphanumeric characters 180mm height. no $3.40 CE09011
8.57 One coat of white colour road marking quick dryingchlorinated rubber based paint for handicap logo with theword 'RESERVED' painted in red on concrete pavedparking lot.
no $32.70 O070
8.58 Extra over items O054 to O061, CE09009, CE09019,CE09010 and CE09011 for using yellow, red or blackcolour quick drying chlorinated rubber based paint.
per centum
8.80% O080
Page 38 of 82
HOUSING AND DEVELOPMENT BOARDSTANDARD SCHEDULE OF RATES FOR CIVIL ENGINEERING WORKS (JUL 2013)
S/N DESCRIPTION UNIT RATE ($) CODE
9. DRAINAGE WORKS
9.1 SEWERS
(a) Blinding to Manhole Base
9.01 75mm thick unwashed sand bed/granite dust or fines assealing coat to bottom of manhole base as shown indrawings.
m² $4.30 A048
9.02 75mm thick Grade 15 concrete blinding to bottom ofmanhole base including necessary formwork as shown indrawings.
m² $11.00 A068
(b) Type "A" Section Granular Material
Type "A" section approved granular material bed tosewer line as per details shown in drawings:
9.03 225mm diameter sewer line. m $5.40 B002
9.04 300mm diameter sewer line. m $6.70 B003
9.05 375mm diameter sewer line. m $7.40 B004
9.06 450mm diameter sewer line. m $8.10 B005
9 07 525mm diameter sewer line m $9 50 B0069.07 525mm diameter sewer line. m $9.50 B006
9.08 600mm diameter sewer line. m $10.30 B007
9.09 675mm diameter sewer line. m $11.90 B008
9.10 750mm diameter sewer line. m $12.80 B009
9.11 825mm diameter sewer line. m $14.40 B010
9.12 900mm diameter sewer line. m $15.40 B011
9.13 975mm diameter sewer line. m $25.20 B012
9.14 1.050m diameter sewer line. m $26.40 B013
9.15 1.125m diameter sewer line. m $28.50 B014
9.16 1.200m diameter sewer line. m $29.90 B015
9.17 1.350m diameter sewer line. m $44.30 B016
9.18 1.500m diameter sewer line. m $49.10 B017
Page 39 of 82
HOUSING AND DEVELOPMENT BOARDSTANDARD SCHEDULE OF RATES FOR CIVIL ENGINEERING WORKS (JUL 2013)
S/N DESCRIPTION UNIT RATE ($) CODE
Type "A" section approved granular material bed tosewer line as per details shown in drawings (Cont'd):
9.19 1.650m diameter sewer line. m $54.20 B018
9.20 1.800m diameter sewer line. m $59.40 B019
(c) Type "B" Section Concrete (Without Piling Base)
Grade 30 concrete bed and haunching of Type "B"section to sewer line complete with 75mm thickGrade 15 concrete blinding and all necessaryformwork as per details shown in drawings :
9.21 225mm diameter sewer line. m $38.00 C002
9.22 300mm diameter sewer line. m $49.30 C003
9.23 375mm diameter sewer line. m $52.90 C004
9.24 450mm diameter sewer line. m $56.50 C005
9.25 525mm diameter sewer line. m $65.70 C006
9.26 600mm diameter sewer line. m $69.70 C007
9.27 675mm diameter sewer line. m $79.20 C008
9.28 750mm diameter sewer line. m $83.50 C009
9.29 825mm diameter sewer line. m $90.60 C010
9.30 900mm diameter sewer line. m $95.20 C011
9.31 975mm diameter sewer line. m $141.40 C012
9.32 1.050m diameter sewer line. m $147.30 C013
9.33 1.125m diameter sewer line. m $158.60 C014
9.34 1.200m diameter sewer line. m $164.80 C015
9.35 1.350m diameter sewer line. m $218.90 C016
9.36 1.500m diameter sewer line. m $248.20 C017
9.37 1.650m diameter sewer line. m $276.50 C018
9.38 1.800m diameter sewer line. m $305.40 C019
Page 40 of 82
HOUSING AND DEVELOPMENT BOARDSTANDARD SCHEDULE OF RATES FOR CIVIL ENGINEERING WORKS (JUL 2013)
S/N DESCRIPTION UNIT RATE ($) CODE
(d) Type "B" Section Concrete (With Piling Base)
Grade 30 concrete bed and haunching of Type "B"section to sewer line complete with 75mm thickunwashed sand bed including steel/fabricreinforcement and all necessary formwork as perdetails shown in drawings where piling is required(Piling measured separately):
9.39 225mm diameter sewer line. m $71.60 C021
9.40 300mm diameter sewer line. m $87.00 C022
9.41 375mm diameter sewer line. m $92.70 C023
9.42 450mm diameter sewer line. m $98.50 C024
9.43 525mm diameter sewer line. m $112.00 C025
9.44 600mm diameter sewer line. m $118.00 C026
9.45 675mm diameter sewer line. m $131.90 C027
9.46 750mm diameter sewer line. m $138.30 C028
9.47 825mm diameter sewer line. m $147.50 C029
9 48 900mm diameter sewer line m $156 40 C0309.48 900mm diameter sewer line. m $156.40 C030
9.49 975mm diameter sewer line. m $211.10 C031
9.50 1.050m diameter sewer line. m $218.90 C032
9.51 1.125m diameter sewer line. m $234.60 C033
9.52 1.200m diameter sewer line. m $242.90 C034
9.53 1.350m diameter sewer line. m $309.30 C035
9.54 1.500m diameter sewer line. m $343.20 C036
9.55 1.650m diameter sewer line. m $378.00 C037
9.56 1.800m diameter sewer line. m $413.30 C038
Page 41 of 82
HOUSING AND DEVELOPMENT BOARDSTANDARD SCHEDULE OF RATES FOR CIVIL ENGINEERING WORKS (JUL 2013)
S/N DESCRIPTION UNIT RATE ($) CODE
(e) Type "C" Section Concrete (Without Piling Base)
Grade 30 concrete bed and haunching of Type "C"section to sewer line complete with 75mm thickGrade 15 concrete blinding and all necessaryformwork as per details shown in drawings :
9.57 225mm diameter sewer line. m $47.30 D002
9.58 300mm diameter sewer line. m $66.60 D003
9.59 375mm diameter sewer line. m $69.70 D004
9.60 450mm diameter sewer line. m $72.60 D005
9.61 525mm diameter sewer line. m $93.70 D006
9.62 600mm diameter sewer line. m $96.40 D007
9.63 675mm diameter sewer line. m $112.30 D008
9.64 750mm diameter sewer line. m $114.60 D009
9.65 825mm diameter sewer line. m $131.20 D010
9.66 900mm diameter sewer line. m $133.10 D011
9.67 975mm diameter sewer line. m $202.60 D012
9.68 1.050m diameter sewer line. m $206.10 D013
9.69 1.125m diameter sewer line. m $230.80 D014
9.70 1.200m diameter sewer line. m $234.00 D015
9.71 1.350m diameter sewer line. m $315.70 D016
9.72 1.500m diameter sewer line. m $357.90 D017
9.73 1.650m diameter sewer line. m $400.20 D018
9.74 1.800m diameter sewer line. m $443.90 D019
Page 42 of 82
HOUSING AND DEVELOPMENT BOARDSTANDARD SCHEDULE OF RATES FOR CIVIL ENGINEERING WORKS (JUL 2013)
S/N DESCRIPTION UNIT RATE ($) CODE
(f) Type "C" Section Concrete (With Piling Base)
Grade 30 concrete bed and haunching of Type "C"section to sewer line complete with 75mm thickunwashed sand bed including steel/fabricreinforcement and all necessary formwork as perdetails shown in drawings where piling is required(Piling measured separately):
9.75 225mm diameter sewer line. m $80.80 D021
9.76 300mm diameter sewer line. m $104.30 D022
9.77 375mm diameter sewer line. m $109.60 D023
9.78 450mm diameter sewer line. m $114.60 D024
9.79 525mm diameter sewer line. m $140.00 D025
9.80 600mm diameter sewer line. m $144.70 D026
9.81 675mm diameter sewer line. m $164.90 D027
9.82 750mm diameter sewer line. m $169.40 D028
9.83 825mm diameter sewer line. m $188.00 D029
9.84 900mm diameter sewer line. m $194.20 D030
9.85 975mm diameter sewer line. m $272.30 D031
9.86 1.050m diameter sewer line. m $277.80 D032
9.87 1.125m diameter sewer line. m $306.80 D033
9.88 1.200m diameter sewer line. m $312.10 D034
9.89 1.350m diameter sewer line. m $406.10 D035
9.90 1.500m diameter sewer line. m $453.00 D036
9.91 1.650m diameter sewer line. m $501.70 D037
9.92 1.800m diameter sewer line. m $551.70 D038
Page 43 of 82
HOUSING AND DEVELOPMENT BOARDSTANDARD SCHEDULE OF RATES FOR CIVIL ENGINEERING WORKS (JUL 2013)
S/N DESCRIPTION UNIT RATE ($) CODE
(g) Type "D' Section Concrete (Without Piling Base)
Grade 30 concrete bed and haunching of Type "D"section to sewer line complete with 75mm thickGrade 15 concrete blinding and all necessaryformwork as per details shown in drawings :
9.93 225mm diameter sewer line. m $69.60 E002
9.94 300mm diameter sewer line. m $90.70 E003
9.95 375mm diameter sewer line. m $95.70 E004
9.96 450mm diameter sewer line. m $100.30 E005
9.97 525mm diameter sewer line. m $135.70 E006
9.98 600mm diameter sewer line. m $140.70 E007
9.99 675mm diameter sewer line. m $165.80 E008
9.100 750mm diameter sewer line. m $170.90 E009
9.101 825mm diamater sewer line. m $197.50 E010
9.102 900mm diameter sewer line. m $202.20 E011
9.103 975mm diameter sewer line. m $289.30 E012
9.104 1.050m diameter sewer line. m $296.00 E013
9.105 1.125m diameter sewer line. m $329.70 E014
9.106 1.200m diameter sewer line. m $336.30 E015
9.107 1.350m diameter sewer line. m $476.70 E016
9.108 1.500m diameter sewer line. m $526.80 E017
9.109 1.650m diameter sewer line. m $578.70 E018
9.110 1.800m diameter sewer line. m $632.00 E019
Page 44 of 82
HOUSING AND DEVELOPMENT BOARDSTANDARD SCHEDULE OF RATES FOR CIVIL ENGINEERING WORKS (JUL 2013)
S/N DESCRIPTION UNIT RATE ($) CODE
(h) Type "D" Section Concrete (With Piling Base)
Grade 30 concrete bed and haunching of Type "D"section to sewer line complete with 75mm thickunwashed sand bed including steel/fabricreinforcement and all necessary formwork as perdetails shown in drawings where piling is required(Piling measured separately):
9.111 225mm diameter sewer line. m $103.10 E021
9.112 300mm diameter sewer line. m $128.50 E022
9.113 375mm diameter sewer line. m $133.70 E023
9.114 450mm diameter sewer line. m $142.30 E024
9.115 525mm diameter sewer line. m $181.90 E025
9.116 600mm diameter sewer line. m $189.00 E026
9.117 675mm diameter sewer line. m $218.40 E027
9.118 750mm diameter sewer line. m $225.70 E028
9.119 825mm diameter sewer line. m $254.40 E029
9 120 900mm diameter sewer line m $263 40 E0309.120 900mm diameter sewer line. m $263.40 E030
9.121 975mm diameter sewer line. m $359.00 E031
9.122 1.050m diameter sewer line. m $367.60 E032
9.123 1.125m diameter sewer line. m $405.70 E033
9.124 1.200m diameter sewer line. m $414.50 E034
9.125 1.350m diameter sewer line. m $565.40 E035
9.126 1.500m diameter sewer line. m $621.80 E036
9.127 1.650m diameter sewer line. m $680.20 E037
9.128 1.800m diameter sewer line. m $739.80 E038
Page 45 of 82
HOUSING AND DEVELOPMENT BOARDSTANDARD SCHEDULE OF RATES FOR CIVIL ENGINEERING WORKS (JUL 2013)
S/N DESCRIPTION UNIT RATE ($) CODE
(i) Vitrified Clay Pipes
Vitrified clay pipes with flexible joints includingrubber rings etc all as per Specifications:
9.129 200mm diameter. m $55.50 CE10032
9.130 225mm diameter. m $61.20 F002
9.131 300mm diameter. m $103.80 F003
(j) UPVC Pipes
UPVC pipes to SS272 with flexible joints includingrubber ring etc all as per Specifications:
9.132 250mm diameter. m $41.60 CE10028
(k) RC Pipes Class `H'
R.C. pipes Class `H' in ordinary portland cement withspigot and socket and rubber ring joints:
9.133 300mm diameter. m $121.90 F005
9.134 375mm diameter. m $149.30 F007
9.135 450mm diameter. m $179.80 F009
9.136 525mm diameter. m $206.00 F011
9.137 600mm diameter. m $257.10 F013
9.138 675mm diameter. m $295.00 F015
9.139 750mm diameter. m $348.30 F017
9.140 825mm diameter. m $372.60 F019
R.C. pipes Class `H' lined with PVC or HDPE blanket(spigot and socket or butt ended pipes with loosecollars):
9.141 900mm diameter. m $467.20 F021
9.142 975mm diameter. m $523.60 F023
9.143 1.050m diameter. m $556.60 F025
9.144 1.125m diameter. m $591.70 F027
Page 46 of 82
HOUSING AND DEVELOPMENT BOARDSTANDARD SCHEDULE OF RATES FOR CIVIL ENGINEERING WORKS (JUL 2013)
S/N DESCRIPTION UNIT RATE ($) CODE
R.C. pipes Class `H' lined with PVC or HDPE blanket(spigot and socket or butt ended pipes with loosecollars) (Cont'd):
9.145 1.200m diameter. m $599.20 F029
9.146 1.350m diameter. m $730.20 F031
9.147 1.500m diameter. m $837.50 F033
9.148 1.725m diameter. m $1,025.00 F035
9.149 1.800m diameter. m $1,133.20 F037
(l) Reinforced Concrete Pipes Class `M'
R.C. pipes Class `M' in ordinary portland cement withspigot and socket and with rubber ring joints:
9.150 375mm diameter. m $136.70 F006
9.151 450mm diameter. m $154.50 F008
9.152 525mm diameter. m $177.40 F010
9.153 600mm diameter. m $229.20 F012
9 154 675mm diameter m $258 50 F0149.154 675mm diameter. m $258.50 F014
9.155 750mm diameter. m $295.50 F016
9.156 825mm diameter. m $324.40 F018
(m) Cast Iron Pipes
Heavy duty cast iron pipe with flexible joint asspecified:
9.157 225mm diameter. m $91.90 G047
9.158 300mm diameter. m $107.50 G048
9.159 100mm diameter cast iron spigot and socket vent pipefixed complete including all fittings, etc as specified.
m $44.10 G049
Page 47 of 82
HOUSING AND DEVELOPMENT BOARDSTANDARD SCHEDULE OF RATES FOR CIVIL ENGINEERING WORKS (JUL 2013)
S/N DESCRIPTION UNIT RATE ($) CODE
(n) Pipes in BackDrops/Tumbling Bays
Vitrified clay pipes or concrete pipes in backdrops,tumbling bays, raised junction connections, etcincluding cutting to required lengths:
9.160 200mm diameter. m $42.80 CE10033
9.161 225mm diameter. m $72.30 F042
9.162 300mm diameter. m $120.30 F045
Extra over 200mm diameter vitrified clay pipes orconcrete pipes for:
9.163 Bend. no $181.20 CE10034
9.164 Junction. no $311.70 CE10035
Extra over 225mm diameter vitrified clay pipes orconcrete pipes for:
9.165 Bend. no $65.80 F043
9.166 Junction. no $194.40 F044
Extra over 300mm diameter vitrified clay pipes orExtra over 300mm diameter vitrified clay pipes orconcrete pipes for:
9.167 Bend. no $58.90 F046
9.168 Junction. no $272.70 F047
(o) Concrete Rings and Surround to Manhole
Precast reinforced concrete wall in tubes as manholechamber including supply and lay 150mm thick Grade30 concrete surround and necessary formwork asshown in drawings :
9.169 1.050m diameter. m $703.10 G054
9.170 1.200m diameter. m $828.50 G055
Page 48 of 82
HOUSING AND DEVELOPMENT BOARDSTANDARD SCHEDULE OF RATES FOR CIVIL ENGINEERING WORKS (JUL 2013)
S/N DESCRIPTION UNIT RATE ($) CODE
Precast reinforced concrete wall in tubes as manholechamber including supply and lay 150mm thick Grade30 concrete surround and necessary formwork asshown in drawings (Cont'd):
9.171 1.350m diameter. m $923.90 G056
9.172 1.500m diameter. m $1,051.30 G057
9.173 1.800m diameter. m $1,380.90 G058
(p) Concrete Cover Slabs & PC Unit for Manhole
Precast or cast-in-situ concrete cover slab, undersideto be PVC lined, to brick/cast-in-situ concrete accessshaft all as shown in drawings :
9.174 150mm thick to access shaft with 600mm x 600mm square opening.
no $375.80 G026
9.175 225mm thick to access shaft with 750mm x 750mm square opening.
no $475.80 G027
200mm thick precast concrete slab to tube chamber,underside to be PVC lined, including concretesurround and formwork all as shown in drawings :
9.176 1.050m diameter. no $631.40 G028
9.177 1.200m diameter. no $888.50 G029
9.178 1.350m diameter. no $1,152.30 G030
9.179 1.500m diameter. no $1,357.20 G031
9.180 1.800m diameter. no $1,782.00 G032
200mm thick precast concrete intermediate slab totube chamber, underside to be PVC lined, includingconcrete surround and formwork all as shown indrawings :
9.181 1.500 m diameter. no $1,514.80 G033
9.182 1.800m diameter. no $1,782.00 G034
Page 49 of 82
HOUSING AND DEVELOPMENT BOARDSTANDARD SCHEDULE OF RATES FOR CIVIL ENGINEERING WORKS (JUL 2013)
S/N DESCRIPTION UNIT RATE ($) CODE
Precast reinforced concrete unit for manhole, overallsize 800 x 800 comprising of 100mm thick wallincluding bedding in cement mortar (1:3) and Grade30 concrete surround to details as shown in drawings:
9.183 100mm high. no $63.90 CE10020
9.184 200mm high. no $83.60 CE10021
(q) Manhole Cover and Frame, Ladder, Railings, etc.
Double triangular manhole cover and frame includingbedding frame in cement and sand mortar (1:3) andGrade 30 concrete surround to details as shown indrawings :
9.185 Overall dimensions 800mm x 800mm x 140mm heavy duty cover.
no $178.00 G035
9.186 Overall dimensions 750mm x 750mm x 90mm medium duty cover.
no $94.60 G036
9.187 Aluminium ladder 450mm wide including stringers, rungsto details as shown in drawings.
m $63.50 G038
9.188 Aluminium ladder holder bracket and shoe to details as set $56.80 G039shown in drawings (For 1 no. of ladder).
9.189 44mm (external) diameter x 1000mm high aluminiumalloy handrailing including screwed bends, junctions,flanged bottom to details as shown in drawings.
m $87.10 G040
9.190 Aluminium alloy safety link chain including hooks and endrings to details as shown in drawings.
no $23.60 G041
Stainless steel safety chain including stainless steelplate, hook and eye and shackle to details as shownin drawings for:
9.191 750mm to 825mm diameter sewer. set $141.30 G042
9.192 900mm to 1050mm diameter sewer. set $153.40 G043
9.193 1200mm diameter sewer and above. set $165.50 G044
Page 50 of 82
HOUSING AND DEVELOPMENT BOARDSTANDARD SCHEDULE OF RATES FOR CIVIL ENGINEERING WORKS (JUL 2013)
S/N DESCRIPTION UNIT RATE ($) CODE
16mm diameter multi-strand poly-propylene nylonrope as safety chain including stainless steel plate,hook and eye and shackle to details as shown indrawings for:
9.194 750mm to 825mm diameter sewer. set $26.40 CE10005
9.195 900mm to 1050mm diameter sewer. set $26.80 CE10006
9.196 1200mm diameter sewer and above. set $27.10 CE10007
9.197 Malleable cast iron step all in accordance with BS 1247. kg $21.40 G045
9.198 Ductile cast iron manhole cover and frame overalldimensions 850mm x 850mm x 100mm including beddingframe as shown in drawings.
no $229.50 M036
9.199 Supply of 6mm diameter `T-shape' galvanised mild steellifting key (for opening of drain grating/cover slab) asshown in drawings.
no $2.70 CE10025
(r) Other Works
9.200 Provide hole through existing manhole wall for sewer inletor outlet not exceeding 300mm diameter and make goodafter fixing (cost of pipe etc to be included).
no $27.30 CE10036
9.201 200mm diameter vitrified clay pipe inlet to manhole forhouse sewer connection including jointing and pluggingwith stopper (Cost of pipes etc included).
no $28.90 CE10037
Page 51 of 82
HOUSING AND DEVELOPMENT BOARDSTANDARD SCHEDULE OF RATES FOR CIVIL ENGINEERING WORKS (JUL 2013)
S/N DESCRIPTION UNIT RATE ($) CODE
9.202 Raise or lower level of manhole cover not exceeding300mm including breaking concrete, brickwork, re-concreting, re-fixing manhole cover and frame andmaking good after completion (Supply and installation ofprecast tube, if any, shall be measured separately).
no $469.50 G053
9.203 Painting and greasing of manhole frame and coverincluding preparation of surface by scraping andremoving of rust, mill scale concrete waste, etc.
no $24.60 G059
Tunnel with proper timber strutting, supply, lay andjoin flexible joint vitrified clay pipe with spigot andsocket rubber ring joint and concrete surround all asspecified:
9.204 225mm diameter. m $969.40 H002
Tunnel with proper timber strutting, supply, lay andjoin Class "M" concrete pipe with spigot and socketrubber ring joint and concrete surround all asspecified:
9.205 300mm diameter. m $1,191.60 H003
9.206 450mm diameter. m $1,402.00 H004
9.207 600mm diameter. m $1,668.30 H005
Pipe Jacking of vitrified clay pipes all as specified:
9.208 200mm diameter. m $442.80 CE10011
9.209 225mm diameter. m $488.80 CE10027
9.210 250mm diameter. m $534.80 CE10012
9.211 300mm diameter. m $603.80 CE10013
9.212 400mm diameter. m $649.80 CE10014
Pipe Jacking of Class "H" concrete pipe all asspecified:
9.213 225mm diameter. m $580.80 H011
9.214 300mm diameter. m $615.30 H012
9.215 375mm diameter. m $644.00 H015
9.216 450mm diameter. m $672.80 H013
9.217 525mm diameter. m $701.50 H016
9.218 600mm diameter. m $730.30 H014
Page 52 of 82
HOUSING AND DEVELOPMENT BOARDSTANDARD SCHEDULE OF RATES FOR CIVIL ENGINEERING WORKS (JUL 2013)
S/N DESCRIPTION UNIT RATE ($) CODE
9.2 DRAINS
(a) Half Round and Composite Drain Channels andBlock Drains
Half-round precast concrete drain channels true toline and level as shown in drawings:
9.219 150mm diameter (Type C1). m $9.00 J001
9.220 230mm diameter (Type C2). m $9.90 J002
9.221 305mm diameter (Type C3). m $11.50 J003
9.222 380mm diameter (Type C4). m $12.10 J004
9.223 455mm diameter (Type C5). m $14.00 J005
9.224 535mm diameter (Type C6). m $15.10 J006
Precast concrete composite drain channels asspecified true to line and level as shown in drawings(Excavation, sand bed and bakau roller measuredseparately):
9.225 300mm (Type C7). m $28.80 J008
9 226 300mm (Type C7A) m $33 60 J0709.226 300mm (Type C7A). m $33.60 J070
9.227 300mm (Type C7B). m $32.80 J072
9.228 380mm (Type C8A). m $37.30 J009
9.229 455mm (Type C8B). m $60.10 J010
Page 53 of 82
HOUSING AND DEVELOPMENT BOARDSTANDARD SCHEDULE OF RATES FOR CIVIL ENGINEERING WORKS (JUL 2013)
S/N DESCRIPTION UNIT RATE ($) CODE
Standard precast concrete block drain as specified,true to line and level as shown in drawings(Excavation, sand bed and bakau rollers measuredseparately):
9.230 305mm (Type B1). m $29.30 J016
9.231 380mm (Type B2). m $33.80 J017
9.232 600mm (Type B3). m $67.80 J018
(b) Drain Opening Cover Slabs, Catch-Basin andOthers
9.233 3-piece precast concrete Grade 40 drain opening cover slab each size 277mm x 569mm x 25mm thick reinforced with a layer of 25mm x 25mm x 1.5mm thick fine mesh laid on and including 3mm thick galvanised mild steel flat plate and 64mm x 38mm x 4.5 mm thick galvanised mild steel angle frame to details as shown in drawings.
no $107.90 CE10029
9.234 Precast concrete Grade 40 drain opening cover slab overall size 277mm x 569mm x 25mm thick reinforced with a layer of 25mm x 25mm x 1.5mm thick fine mesh laid on and including 3mm thick galvanised mild steel flat plate to details as shown in drawings.
no $23.80 CE10030
9.235 Extra over for forming 1 no keyhole in precast concrete no $1.00 CE100319.235 Extra over for forming 1 no keyhole in precast concrete drain opening cover slab.
no $1.00 CE10031
9.236 Catch-basin overall size 780mm x 500mm x 575mm (forbus bay) including precast reinforced concrete slabcover, galvanised mild steel angle frame, base plate andaluminium vertical grating all as shown in drawings.
no $163.30 J074
9.237 Non-slip aluminium rungs 300mm wide, made out of25mm diameter aluminium ribbed rung type rods asshown in drawings.
no $25.10 J062
(c) Sub-soil Pipes and Scupper Drains
Perforated UPVC sub-soil pipe to SS141 Class "B"with flexible joints:
9.238 80mm diameter. m $9.00 CE10002
9.239 100mm diameter. m $9.10 K052
9.240 150mm diameter. m $12.80 K053
Page 54 of 82
HOUSING AND DEVELOPMENT BOARDSTANDARD SCHEDULE OF RATES FOR CIVIL ENGINEERING WORKS (JUL 2013)
S/N DESCRIPTION UNIT RATE ($) CODE
High density polyethylene (HDPE) part-perforatedcorrugated sub-soil pipe with plug-in connection:
9.241 DN 80 (80mm diameter). m $8.10 CE10016
9.242 DN 100 (100mm diameter). m $8.90 CE10017
9.243 DN 150 (150mm diameter). m $15.00 CE10018
9.244 DN 200 (200mm diameter). m $28.00 CE10019
9.245 250mm external diameter UPVC drain pipe to SS272(minimum wall thickness 6.1mm) with maximum one jointand Grade 30 reinforced concrete surround andhaunching to pipe laid on a layer of 100mm thick granitefine bed as shown in drawings.
m $73.70 K066
Provide hole through drain wall for UPVC pipe outlet,etc and make good after fixing for (UPVC pipemeasured separately):
9.246 100mm or 150mm diameter pipe outlet. no $3.30 K044
9.247 250mm diameter pipe outlet. no $5.40 K045
9.248 230mm wide x 450mm deep standard precast concreteopen scupper drain channel (Type S1) true to line andlevels as shown in drawings (Excavation, sand bed and
m $26.80 CE10026
levels as shown in drawings (Excavation, sand bed andbakau rollers measured separately).
9.249 Provide scupper opening (varies from 225mm to 250mmin width and 50mm to 75mm in height respectively)through drain wall using metal formwork.
no $6.10 CE10004
9.250 Precast concrete wall overall size 400mm x 300mm x150mm thick with 250mm wide x 75mm high scupperopening (with 4nos 10mm diameter mild steel bar).
no $22.80 CE11041
9.251 Precast concrete drop-inlet chamber 980mm x 475mm x425mm deep including hot-dipped galvanised mild steelhinged grating to details as shown in drawings.
no $138.00 K057
Page 55 of 82
HOUSING AND DEVELOPMENT BOARDSTANDARD SCHEDULE OF RATES FOR CIVIL ENGINEERING WORKS (JUL 2013)
S/N DESCRIPTION UNIT RATE ($) CODE
9.252 300mm x 300mm x 350mm deep (internal size) precastconcrete sump comprising of 100mm thick sides andbottom reinforced with WSF B6 and B5, T13mm diametersteel bars including 380mm x 380mm x 75mm precastconcrete cover slab reinforced with WSF A5 as shownin drawings.
no $58.50 K067
9.253 Precast concrete scupper mouth unit. no $15.70 K058
9.254 Precast concrete catch basin mouth unit, overall size1100mm x 250mm x 100mm thick (for bus bay) as shownin drawings.
no $19.50 CE10024
9.255 Crusher run sub-drains 300 mm wide x 375mm deepwrapped with synthetic membrane (geotextiles with aminimum flow rate of 150l/s/m2 (10cm head) and atensile strength of 400N/5cm) under footpaths or belowroad formation including necessary excavation.
m $17.10 L003
9.256 Add to last item for each additional 100mm increase indepth.
m $4.20 L020
(d) Weepholes
UPVC pipe to SS213:1979 as weephole not exceeding300mm long:
9.257 50mm diameter. no $2.40 M0099.257 50mm diameter. no $2.40 M009
9.258 65mm diameter. no $2.70 M042
9.259 80mm diameter. no $4.10 M010
9.260 100mm diameter. no $6.40 M011
9.261 300mm x 300mm Geotextile membrane to side of drainwall at weepholes all as specified.
no $1.70 CE10003
9.262 225mm x 225mm loose rubble packing to sides of drains,retaining walls etc behind weepholes including necessaryexcavation.
m $5.30 L004
9.263 500mm wide synthetic membrane (geotextiles with aminimum flow rate of 150l/s/m2 (10cm head) and atensile strength of 400N/5cm) strip to side of retainingwall, etc (excavation measured separately).
m $2.60 L021
Page 56 of 82
HOUSING AND DEVELOPMENT BOARDSTANDARD SCHEDULE OF RATES FOR CIVIL ENGINEERING WORKS (JUL 2013)
S/N DESCRIPTION UNIT RATE ($) CODE
(e) Silt Traps, Water Trough & Vibration Access
Reinforced Concrete temporary silt trap for drains,including unwashed sand bed to details as shown indrawings (excavation measured separately):
9.264 Overall size 1920mm x 2430mm x 1645mm depth (Type A).
no $1,805.90 CE10008
9.265 Overall size 2800mm x 4050mm x 2400mm depth, complete with 1200mm high timber fencing surround with one coat of enamel paint, set in and including concrete footings, "DANGER-KEEP OUT" warning signboards (Type B).
no $4,849.90 CE10009
9.266 Water trough, overall size 21200mm x 3500mm widecomprising of 200mm thick reinforced concrete base slaband 9000mm x 3500mm wide steel platform made out ofroll steel joists supports as framings to receive steelangle sections all welded together with and includingconcrete lining to details as shown in drawings(excavation and earth drain measured separately).
no $5,809.40 CE10022
9.267 Vibration access, overall size 6000mm x 3500mm widecomprising of 200mm thick reinforced concrete base slaband 2 nos of 6000mm x 1000mm wide steel platformmade out of mild steel angle sections asf i / t ll ld d t th ith d i l di
no $1,365.90 CE10023
framings/supports all welded together with and includinghardcore bed to details as shown in drawings (excavationand precast channel drain measured separately).
10. ROADS AND PAVINGS
10.1 Roads
(a) Road Base
10.01 Class 'A' synthetic geotextile membrane on roadformation.
m² $2.80 CE11018
10.02 50mm thick ash or unwashed sand bed on consolidatedroad formation.
m² $4.60 J054
10.03 Coarse granite aggregate (crusher run) road base blindedwith 20mm aggregate all as specified, deposited, spread,levelled, rolled and mechanically consolidated true tolevel and camber.
m³ $72.10 J073
Page 57 of 82
HOUSING AND DEVELOPMENT BOARDSTANDARD SCHEDULE OF RATES FOR CIVIL ENGINEERING WORKS (JUL 2013)
S/N DESCRIPTION UNIT RATE ($) CODE
10.04 Consolidation of road base with a powered roller. m² $1.90 J059
10.05 Plant Mixed Crushed Granite Aggregate (max. size 50mm& below), deposited, spread, levelled, rolled andmechanically consolidated true to level and camber.
m³ $51.60 J060
10.06 Sub-base materials (quarry/premix waste) deposited andcompacted to level and camber.
m³ $57.20 CE11017
(b) Bituminous Premix
Premix bituminous surfacing including rolling withlight and heavy rollers successively as specified(including bituminous emulsion tack coat):
10.07 Type "B1" to a consolidated thickness of 75mm. m² $22.30 CE11004
10.08 Type "B1" to a consolidated thickness of 90mm. m² $26.10 CE11005
10.09 Type "B1" to a consolidated thickness of 120mm. m² $34.90 CE11006
10.10 Type "W3" to a consolidated thickness of 25mm. m² $7.10 CE11007
10.11 Type "W3" to a consolidated thickness of 40mm. m² $10.90 CE11008
10.12 Type "W3B" to a consolidated thickness of 25mm. m² $7.10 CE11009
10 13 Type "W3B" to a consolidated thickness of 50mm m² $14 70 CE1101010.13 Type W3B to a consolidated thickness of 50mm. m $14.70 CE11010
10.14 Extra over for forming 1800mm wide hump with Type"W3B" premix including painting as shown in drawings.
m $55.90 CE11011
10.15 Extra over for forming 4000mm wide hump with Type"W3B" premix including painting as shown in drawings.
m $144.70 CE11012
10.16 Extra over for forming 5800 mm wide raised zebracrossing with Type "W3B" premix including painting asshown in drawings.
m $202.10 CE11027
Page 58 of 82
HOUSING AND DEVELOPMENT BOARDSTANDARD SCHEDULE OF RATES FOR CIVIL ENGINEERING WORKS (JUL 2013)
S/N DESCRIPTION UNIT RATE ($) CODE
The rate for mobilisation of plant and equipmentunder this sub-heading is applicable for the laying ofasphalt premix instructed by way of worksinstructions or works order given by the SO Rep.
10.17 Mobilisation of mechanical spreader for the laying ofasphalt premix including all necessary fuel and driver.
item $805.00 CE15036
10.18 Mobilisation of milling machine for the laying of asphaltpremix including all necessary fuel and driver.
item $2,501.30 CE15037
10.19 Mobilisation of mechanical sweeper for the laying ofasphalt premix including all necessary fuel and driver.
item $862.50 CE15038
10.20 Mobilisation of pneumatic type roller for the laying ofasphalt premix including all necessary fuel and driver.
item $805.00 CE15039
10.21 Mobilisation of static 10-tonne roller for the laying ofasphalt premix including all necessary fuel and driver.
item $805.00 CE15040
10.22 Mobilisation of vibratory roller for the laying of asphaltpremix including all necessary fuel and driver.
item $805.00 CE15041
10.2 PAVINGS
(a) Concrete Paving Slabs
Concrete paving slab including 50mm granite fines orConcrete paving slab including 50mm granite fines orunwashed sand bed and jointing in cement mortar(1:3):
10.23 50mm thick. m² $31.30 K012
10.24 75mm thick. m² $51.00 K011
10.25 100mm thick Grade 30 cast-in-situ concrete paving slabreinforced with WSF A10 reinforcement with patternedvoids at 200mm centre to centre formed by expandedpolystyrene formers as carpark lots, on 40mm thickgranite fines including necessary formwork and providingapproved soil mixture to voids and close turf with cowgrass as shown in drawings.
m² $56.90 K078
10.26 150mm thick Grade 30 cast-in-situ concrete paving slabreinforced with 2 layers of WSF A10 reinforcement withpatterned voids at 200mm centre to centre formed byexpanded polystyrene formers as lorry parking lots, on40mm thick granite fines including necessary formworkand providing approved soil mixture to voids and closeturf with cow grass as shown in drawings.
m² $78.00 K079
Page 59 of 82
HOUSING AND DEVELOPMENT BOARDSTANDARD SCHEDULE OF RATES FOR CIVIL ENGINEERING WORKS (JUL 2013)
S/N DESCRIPTION UNIT RATE ($) CODE
(b) BG Slabs
10.27 600mm x 400mm x 120mm "B.G. Slabs" on 50mm sandbed, topping up all voids with approved soil mixture andturfing including trimming and excavation to formation asshown in drawings.
no $12.80 K015
(c) Aeration Slabs
10.28 600mm x 600mm x 75mm thick precast concrete aerationslab reinforced with T9mm diameter steel bars on 40mmthick granite fines to carpark or tree planting areaincluding topping up all voids with approved soil mixtureand close turf with cow grass.
no $19.40 K019
10.29 75mm thick grade 30 concrete reinforcing tee overall size175mm x 175mm for corners of precast concrete aerationslabs reinforced with galvanised weldmesh 228.
no $3.70 B020
(d) Interlocking Concrete Paving Blocks
10.30 Interlocking paving slabs for carparking lots to approvedpattern comprising of 456mm x 456mm x 100mm thicknatural grey coloured perforated interlocking conreteslabs, 228mm x 114mm x 100mm thick colouredinterlocking concrete paving blocks with combination ofwhite coloured paving blocks for demarcation lines
m² $50.40 CE11033
white coloured paving blocks for demarcation lines,including 30mm thick compacted sand bed and toppingup voids with approved soil mixture and close turfing withcow grass and filling all joints with joint-filling sand asshown in drawings.
10.31 Coloured interlocking concrete paving blocks forhandicapped and motor-cycle parking lots comprising of228mm x 114mm x 100mm thick blocks laid to approvedpattern and with combination of white coloured pavingblocks for demarcation lines, including 30mm thickcompacted sand bed and filling all joints with joint-fillingsand as shown in drawings.
m² $46.60 CE11034
10.32 Coloured interlocking concrete paving blocks comprisingof 228mm x 114mm x 100mm thick blocks laid toapproved pattern including 30mm thick compacted sandbed and filling all joints with joint-filling sand as specified.
m² $43.50 CE11043
10.33 Extra over 228mm x 114mm x 100mm interlockingconcrete paving blocks for forming raised hump atlinkway service roads.
m² $7.90 CE11036
Page 60 of 82
HOUSING AND DEVELOPMENT BOARDSTANDARD SCHEDULE OF RATES FOR CIVIL ENGINEERING WORKS (JUL 2013)
S/N DESCRIPTION UNIT RATE ($) CODE
10.34 Extra over 228mm x 114mm x 100mm interlockingconcrete paving blocks for forming 1800mm wide roadhump across interlocking paving driveways.
m $13.00 CE11037
10.35 Extra over 228mm x 114mm x 100mm colouredinterlocking concrete paving blocks for forming handicaplogo with white coloured paving blocks.
no $58.30 CE11035
Coloured interlocking concrete paving blocks toapproved pattern including 50mm thick compactedsand bed and filling all joints with joint-filling sand asspecified:
10.36 Size 225mm x 112.5mm x 80mm thick. m² $41.00 SD077A
10.37 Size 225mm x 112.5mm x 100mm thick. m² $42.50 SD078A
10.38 Extra over 225mm x 112.5mm x 80mm thick interlockingconcrete paving blocks for forming raised hump atlinkway service roads comprising of plant mixed crushedgranite aggregate.
m² $10.60 CE11024
10.39 Extra over 225mm x 112.5mm x 80mm thick interlockingconcrete paving blocks for forming 1800mm wide roadhump across interlocking paving driveways as shown indrawings.
m $9.80 CE11001
(e) Expansion Joints( ) p
10.40 12mm wide x 25mm deep expansion joint filled with 40/50bitumen to cast-in-situ footpath and cycle track.
m $3.60 K024
10.41 15mm x 200mm deep self expanding cork with 25mmdiameter mild steel bar 600mm long half the lengthtreated with bituminous paint and its end covered with ametal cap bedded across the joint at 450mm centres andto details shown in drawings.
m $18.30 K074
10.42 13mm x 200mm compressed foam plastic strip. m $2.40 K026
10.43 25mm x 20mm x 2mm/5mm thick `L' shaped UPVCplastic strip laid to cast-in-situ drain top slab/concretepavement/kerb foundation as expansion joint as shownin drawings.
m $5.60 K070
10.44 Longitudinal joint of heavy duty sealant with T13mmdiameter bars x 800mm long spaced at 600mm centres todetail shown in drawings.
m $13.20 K076
Page 61 of 82
HOUSING AND DEVELOPMENT BOARDSTANDARD SCHEDULE OF RATES FOR CIVIL ENGINEERING WORKS (JUL 2013)
S/N DESCRIPTION UNIT RATE ($) CODE
10.45 25mm wide x 200mm deep expansion joint with FLEXCELL fibre board filler.
m $11.70 CE11044
10.46 175mm wide x 3mm thick lead bearing plate. m $19.50 CE11045
(f) Kerbs, Dividers, etc.
10.47 125mm x 125mm precast concrete kerb including jointingin cement mortar to details as shown in drawings.
m $10.70 K036
10.48 125mm x 300mm precast concrete kerb including jointingin cement mortar to details as shown in drawings.
m $15.40 K032
10.49 Extra over 125mm x 125mm precast concrete kerb forusing 125mm x 125mm x 300mm high precast concretekerb at sharp corners.
m $14.90 CE11042
Precast concrete kerb including jointing in cementmortar to details as shown in drawings :
10.50 125mm x 280mm (with 20mm diameter mild steel bar).
m $16.30 CE11014
10.51 125mm x 280mm x R350mm precast concrete kerb (with 2 nos 20mm diameter mild steel bars, each 150mm long).
no $14.90 CE11038
10.52 Extra over 125mm x 280mm precast concrete kerb forusing 125mm x 105mm - 160mm (overall plan size) x280mm high precast concrete kerb (with 20mm diametermild steel bar) for turning radius not exceeding 1.0m.
m $31.20 CE11031
10.53 Extra over 125mm x 280mm precast concrete kerb forusing 125mm x 260mm - 300mm (overall plan size) x280mm high precast concrete kerb (with 20mm diametermild steel bar) for turning radius exceeding 1.0m but notexceeding 2.0m.
m $12.90 CE11032
10.54 Extra over 125mm x 280mm precast concrete kerb forusing 125mm x 290mm - 300mm (overall plan size) x280mm high precast concrete kerb (with 20mm diametermild steel bar) for turning radius exceeding 2.0m but notexceeding 6.0m.
m $13.80 CE11039
Page 62 of 82
HOUSING AND DEVELOPMENT BOARDSTANDARD SCHEDULE OF RATES FOR CIVIL ENGINEERING WORKS (JUL 2013)
S/N DESCRIPTION UNIT RATE ($) CODE
10.55 Extra over 125mm x 280mm precast concrete kerb forusing 125mm x 300mm (overall plan size) x 280mm highprecast concrete kerb (with 20mm diameter mild steelbar) for turning radius exceeding 2.0m but not exceeding6.0m.
m $12.90 CE11040
Precast concrete divider kerb specially cast solidincluding jointing in cement mortar to details asshown in drawings:
10.56 300mm x 150mm. m $24.40 K037
10.57 380mm x 200mm. m $31.90 K038
10.58 190mm x 90mm red bull-nose brick kerb laid in cementmortar (1:3) all as shown in drawings.
m $17.10 K072
10.59 225mm x 150mm x 150mm precast concrete road lanedivider with 2 nos of 51mm diameter reflector discsecured to concrete surface and including painting,concrete foundation and excavation.
no $30.10 CE11046
10.60 Flexible reflective road lane divider including Grade 30concrete footing as shown in drawings.
no $86.70 CE11016
(g) Pipe Crossings
UPVC pipe to SS141 Class `B' for crossing with 3mmp p gdiameter nylon rope (minimum protruded length1000mm) including sand bed for car park/streetlighting:
10.61 80mm diameter. m $4.60 CE11019
10.62 100mm diameter. m $5.80 CE11020
10.63 150mm diameter. m $10.50 CE11021
Class 'B' galvanised iron pipes for crossing with 3mmdiameter nylon rope (minimum protruded length1000mm) including sand bed for car park/streetlighting:
10.64 80mm diameter. m $13.10 CE11022
10.65 100mm diameter. m $18.70 CE11023
Page 63 of 82
HOUSING AND DEVELOPMENT BOARDSTANDARD SCHEDULE OF RATES FOR CIVIL ENGINEERING WORKS (JUL 2013)
S/N DESCRIPTION UNIT RATE ($) CODE
11. SIGNAGES
(a) Directional Signs
11.01 80mm diameter Galvanised Iron Pipe Supports todirectional signboard welded with 200mm x 200mm x12mm thick mild steel plate and embedded in 400mm x400mm x 800mm depth Grade 20 concrete foundationincluding excavation as specified in drawings.
no $115.80 O067
125mm x 125mm x 6mm SHS Supports to directionalsignboard painted with one coat of red lead primerand two coats of approved quality paint, welded with300mm x 300mm x 12mm mild steel plate andembedded in Grade 30 concrete foundation includingexcavation as specified in drawings:
11.02 Supports with 600mm x 600mm x 1375mm deep concrete foundation.
pair $514.80 O068
11.03 Supports with 800mm x 800mm x 1375mm deep concrete foundation.
pair $651.90 O081
11.04 Supports with 900mm x 900mm x 1375mm deep concrete foundation.
pair $729.90 O082
Ill i d l i i b d i 1 00 900Illuminated plastic signboard size 1500mm x 900mmcomprising of 100mm x 23mm U-channel elephantgrey powder coated finish main frame filled in onboth faces with 5mm thick clear polycarbonate plastic sheet with green translucent sticker on the reverseside complete with all letterings, graphics/logos,hinges, masterkeyed locksets, fluorescent tubes,flexible electric cables and weather proof terminationbox and the signboard mounted onto and including2nos 3mm thick x 110mm diameter semi-circularnatural anodised aluminium post and all necessaryGrade 20 concrete foundation and excavation asspecified in drawings for:
11.05 Directional signboard for Apartment/Industrial Blocks. no $1,415.30 CE12042
11.06 Multi-storey carpark. no $1,415.30 CE12009
Page 64 of 82
HOUSING AND DEVELOPMENT BOARDSTANDARD SCHEDULE OF RATES FOR CIVIL ENGINEERING WORKS (JUL 2013)
S/N DESCRIPTION UNIT RATE ($) CODE
`Curve Alignment Marker' sign comprising of 1 no2.03mm (14SWG) thick aluminium base plate withdiamond grade retro-reflective sheetings withgraphics on one face to LTA's requirements asshown in drawings and fixed to hot-dippedgalvanised SHS posts for sign, set in and includingconcrete footings, excavation and disposal ofexcavated materials from site.
11.07 Size 600mm x 750mm (for Arterial Road). no $275.70 CE12044
11.08 Size 750mm x 900mm (for Expressway). no $393.80 CE12053
`Object Marker' sign comprising of 1 no 2.03mm(14SWG) thick aluminium base plate with diamondgrade retro-reflective sheetings with graphics on oneface to LTA's requirements as shown in drawings andfixed to hot-dipped galvanised SHS posts for sign, setin and including concrete footings, excavation anddisposal of excavated materials from site.
11.09 Size 600mm x 600mm. no $228.40 CE12054
11.10 Size 340mm x 900mm. no $200.10 CE12055
11.11 Size 900mm x 900mm. no $464.60 CE12056
11.12 `Barrier' sign size 1520mm x 400mm comprising of 1no2.03mm (14SWG) thick aluminium base plate withdiamond grade retro-reflective sheetings with graphics onone face to LTA's requirements as shown in drawingsand fixed to hot-dipped galvanised SHS posts, set in andincluding concrete footings, excavation and disposal ofexcavated materials from site.
no $421.10 CE12011
Page 65 of 82
HOUSING AND DEVELOPMENT BOARDSTANDARD SCHEDULE OF RATES FOR CIVIL ENGINEERING WORKS (JUL 2013)
S/N DESCRIPTION UNIT RATE ($) CODE
Block Directional Signboard comprising of 2 nos.aluminium framed 16 SWG aluminium sign plates,with diamond grade retro-reflective sheetings withnumerals, alphabets and arrows mounted to bothsides, fixed to and including 2 nos of 50.8mm x50.8mm x 4mm galvanised SHS supports (2700mmhigh from ground level) welded with 200mm x200mm x 6mm thick mild steel plate and embeddedin 350mm x 350mm x 500mm deep Grade 20 concretefoundation including painting and excavation asshown in drawings:
11.13 Size 1350mm x 750mm. no $1,164.90 CE12045
11.14 Size 1350mm x 550mm. no $881.40 CE12046
Road directional, confirmatory signboard and neighbourhood maps mounted on and including all necessary mild steel framing supports and painting (post and footing measured separately):
11.15 Comprising 1 no 14SWG aluminium base plate with diamond grade retro-reflective sheeting, letterings, numerals and figures on one face.
m2 $689.40 CE12051
11.16 Comprising 2 nos 14SWG aluminium base plates with diamond grade retro-reflective sheeting, letterings,
l d fi d f
m2 $815.90 CE12052
numerals and figures on exposed faces.
200mm high Street Name plate not exceeding 1.50mlength made out of aluminium `I' extrusion withdiamond grade retro-reflective sheeting (white) andvinyl film non reflective alphabets and numeralsprinted on both faces as shown in drawings:
11.17 Fixed to and including 50.8mm x 50.8mm x 4mm galvanised SHS post and base plate with concrete foundation and all necessary excavation and disposal of excavated material.
no $336.90 O079
Page 66 of 82
HOUSING AND DEVELOPMENT BOARDSTANDARD SCHEDULE OF RATES FOR CIVIL ENGINEERING WORKS (JUL 2013)
S/N DESCRIPTION UNIT RATE ($) CODE
200mm high Street Name plate not exceeding 1.50mlength made out of aluminium `I' extrusion withdiamond grade retro-reflective sheeting (white) andvinyl film non reflective alphabets and numeralsprinted on both faces as shown in drawings(Cont'd):
11.18 Fixed to lamp post with and including 25mm x 6mm thick aluminium flat bar cantilever support and 19mm stainless steel bands, buckles and other accessories (Type '2').
no $287.90 CE12027
11.19 Fixed to lamp post with and including purpose made holder of 20mm diameter aluminium pipe and 19mm wide stainless steel bands, buckles and other accessories (Type '1').
no $287.90 CE12026
11.20 5mm thick aluminium sign plate overall size 100mm x75/50mm with letterings for services crossing atdriveways including hacking of kerb and plastering signplate with cement mortar onto concrete kerb/drain kerb asshown in drawings.
no $14.20 CE12006
(b) Traffic Signs
Traffic Signs comprising of 2.03mm (14SWG) thickAluminium base plate with diamond grade retro-
fl ti h ti ith l tt i d hireflective sheetings with letterings and graphics onone face to LTA's requirements as shown in drawings(Irrespective of letterings and graphics):
11.21 600mm x 150mm and fixed to hot-dipped galvanised SHS post set in and including precast concrete footing, excavation and disposal of excavated materials from site.
no $86.70 P030
11.22 600mm x 400mm ditto. no $165.40 CE12001
11.23 600mm x 450mm ditto. no $181.20 P031
11.24 600mm x 600mm ditto. no $228.40 P032
11.25 600mm x 900mm ditto. no $322.90 CE12002
Page 67 of 82
HOUSING AND DEVELOPMENT BOARDSTANDARD SCHEDULE OF RATES FOR CIVIL ENGINEERING WORKS (JUL 2013)
S/N DESCRIPTION UNIT RATE ($) CODE
Traffic Signs comprising of 2.03mm (14SWG) thickAluminium base plate with diamond grade retro-reflective sheetings with letterings and graphics onone face to LTA's requirements as shown in drawings(Irrespective of letterings and graphics) (Cont'd):
11.26 2 nos. of 600mm x 600mm and fixed to hot-dipped galvanised SHS post set in and including precast concrete footing, excavation and disposal of excavated materials from site.
no $417.40 CE12003
11.27 2 nos. of 600mm x 600mm and 2 nos. arrow signs each 600mm x 150mm ditto.
no $511.90 CE12008
11.28 1 no. of 600mm x 900mm and 1 no. of 600mm x 450mm ditto.
no $464.60 CE12031
11.29 900mm x 900mm ditto. no $464.60 CE12032
11.30 2 nos. of 900mm x 900mm ditto. no $889.80 CE12033
11.31 900mm x 1200mm ditto. no $606.40 CE12034
11.32 600mm x 150mm and fixed to 6mm thick aluminium sign holder secured to lamp post by 19mm wide stainless steel band with buckle.
no $78.10 CE12015
11.33 600mm x 400mm ditto. no $156.80 CE12016
11.34 600mm x 450mm ditto. no $172.60 CE12017
11.35 600mm x 600mm ditto. no $219.80 CE12018
11.36 600mm x 900mm ditto. no $314.30 CE12019
11.37 2 nos. of 600mm x 600mm ditto. no $434.70 CE12020
11.38 2 nos. of 600mm x 600mm and 2 nos. arrow signs each 600mm x 150mm ditto.
no $585.80 CE12021
11.39 1 no. of 600mm x 900mm and 1 no. of 600mm x 450mm ditto.
no $481.90 CE12035
11.40 900mm x 900mm ditto. no $456.00 CE12037
11.41 2 nos. of 900mm x 900mm ditto. no $907.10 CE12038
11.42 600mm x 1200mm ditto. no $408.80 CE12036
11.43 900mm x 1200mm ditto. no $597.80 CE12039
Page 68 of 82
HOUSING AND DEVELOPMENT BOARDSTANDARD SCHEDULE OF RATES FOR CIVIL ENGINEERING WORKS (JUL 2013)
S/N DESCRIPTION UNIT RATE ($) CODE
"Exit" sign comprising of 2.03mm (14SWG) thickaluminium base plate with diamond grade retro-reflective sheetings with alphabets and arrows asshown in drawings:
11.44 Alternative `A' (Single Face) with 50.8mm x 50.8mm x 4mm thick galvanised SHS post set in and including concrete footing, excavation and disposal of excavated materials from site.
no $228.40 CE12047
11.45 Alternative `B' (Single Face) with ditto. no $237.60 CE12048
11.46 Alternative `A' (Double Face) with 40mm diameter galvanised iron class `A' post set in and including concrete footing, excavation and disposal of excavated materials from site.
no $417.40 CE12049
11.47 Alternative `B' (Double Face) with ditto. no $426.60 CE12050
11.48 Alternative `A' (Single Face) and fixed to 6mm thick aluminium sign holder secured to lamp post by 19mm wide stainless steel band with buckle.
no $219.80 CE12022
11.49 Alternative `B' (Single Face) and ditto. no $215.60 CE12023
11.50 Alternative `A' (Double Face) and fixed to 6mm thick aluminium sign holder secured to lamp post by 19mm wide stainless steel band with buckle
no $434.70 CE12024
wide stainless steel band with buckle.
11.51 Alternative `B' (Double Face) and ditto. no $426.30 CE12025
11.52 "Handicap Logo" sign plate size 650mm x 650mm cum"Unauthorized Vehicles Fine $400" plate size 650mm x450mm comprising of 2.03mm (14SWG) thick aluminiumbase plate with diamond grade retro-reflective sheetingswith letterings and graphics on one face, hot dippedgalvanised SHS post for sign, set in and includingconcrete footing; excavation and disposal of excavatedmaterials from site.
no $419.70 CE12013
Page 69 of 82
HOUSING AND DEVELOPMENT BOARDSTANDARD SCHEDULE OF RATES FOR CIVIL ENGINEERING WORKS (JUL 2013)
S/N DESCRIPTION UNIT RATE ($) CODE
11.53 "NO ENTRY" sign plate size 600mm x 600mm cum"EXCEPT FIRE ENGINE" plate size 600mm x 400mmcomprising of 2.03mm (14SWG) thick aluminium baseplate with diamond grade retro-reflective sheetings withletterings and graphics on one face and fixed to hotdipped galvanised SHS post, set in and including precastconcrete footing, excavation and disposal of excavatedmaterials from site as shown in drawings.
no $354.40 CE12029
11.54 "Raised Zebra Crossing Ahead" sign plate, overall size600mm x 1200mm, comprising of 2.03mm (14SWG) thickaluminium base plate with diamond grade retro-reflectivesheetings with letterings and graphics on one face andfixed to hot-dipped galvanised SHS post set in andincluding precast concrete footing, excavation anddisposal of excavated materials from site as shown indrawings.
no $385.30 CE12030
"Pedestrian Alert" sign plate, overall size 450mm x450mm comprising of 2.03mm (14SWG) thickaluminium base plate with diamond grade retro-reflective sheetings with letterings and graphics onone face as shown in drawings:
11.55 Fixed to hot-dipped galvanised SHS post including concrete foundation and excavation.
no $145.70 CE12043
11 56 Fixed to 6mm thick aluminium sign holder secured to no $137 10 CE1205711.56 Fixed to 6mm thick aluminium sign holder secured to lamp post by 19mm wide stainless steel band with buckle.
no $137.10 CE12057
230mm diameter fibre glass deviation bollard,1000mm high above floor level complete with 300mmhigh with diamond grade retro-reflective sheetingsdirectional sign and with foot of bollard bolted to andincluding 205mm diameter x 6mm thick mild steelpipe welded on to 300mm x 300mm x 5.4mm thickmild steel base plate all as shown in drawings:
11.57 Deviation bollard on grass verge including all necessary concrete foundation.
no $283.40 CE12005
11.58 Deviation bollard on concrete footpath. no $283.40 CE12005
Page 70 of 82
HOUSING AND DEVELOPMENT BOARDSTANDARD SCHEDULE OF RATES FOR CIVIL ENGINEERING WORKS (JUL 2013)
S/N DESCRIPTION UNIT RATE ($) CODE
11.59 Hollow plastic reflector post, size 100mm x 120mm x1130mm, consisting of high density polyethylene in whitecolour with a black welded day-light marker and fitted with two round reflectors with foot fixed to 4.5mm thick hot-dipped galvanised hollow section and cast into concreteas shown in drawings.
no $55.30 CE12007
(c) Signboards
11.60 "DANGER-KEEP OUT" or other warning signboardsconsisting of 20mm thick timber board, complete withpainted background and wordings or signs by stencilprinting in colour in one or more languages of sizes600mm x 900mm and above but less than 1.0 sqmscrewed to m.s. brackets and supported by 30mm sq m.s. hollow section, elevated not less than 1.5m above groundlevel, complete with a concrete footing of 300mm x300mm x 600mm depth as approved by the S.O.'srepresentative.
no $40.00 Q021
11.61 Temporary sewer manhole sign comprising of 2.3mm (14SWG) thick aluminium base plate with engineering gradereflective sheet with graphics and letterings in red, whiteand black on one face and bolted onto a 40mm diametergalvanised steel pipe 2400mm long all as specified.
no $80.30 Q049
11 62 Temporary carpark sign plate size 900mm x 500mm no $96 00 CE1204111.62 Temporary carpark sign plate size 900mm x 500mmcomprising of 2.3mm (14 SWG) thick aluminium baseplate with engineering grade reflective sheet withgraphics and letterings on one face and bolted onto a hot-dipped galvanised post set in and including precastconcrete footing all as shown in drawings .
no $96.00 CE12041
11.63 Project Signboard comprising of 12mm thick plywood(2400mm x 1200mm) with enamel painted backgroundand letterings, mounted on 50.8mm x 50.8mm x 6.4mmthick galvanised SHS frame with 25mm x 25mm x 2mmgalvanised SHS stiffeners fixed to 2nos 76.2mm x76.2mm x 6.4mm thick galvanised SHS supports(3075mm high from ground level) welded with 200mm x200mm x 6mm thick mild steel base plate embedded in400mm x 400mm x 600mm deep Grade 20 concretefoundation including painting and excavation as specifiedin drawings.
no $1,230.50 O074
11.64 800mm diameter convex mirror, fixed to and supported by1 no 75mm diameter galvanised iron pipe and embeddedin 400 x 400 x 500mm deep Grade 25 concretefoundation and all necessary excavation.
no $284.80 CE12012
Page 71 of 82
HOUSING AND DEVELOPMENT BOARDSTANDARD SCHEDULE OF RATES FOR CIVIL ENGINEERING WORKS (JUL 2013)
S/N DESCRIPTION UNIT RATE ($) CODE
12. GATES AND FENCING
(a) Gates
12.01 Double leaf gate consisting of 50mm diameter galvanisediron tubular framing filled in with 50mm x 50mmweldmesh, 75mm diameter galvanised iron tubular gateposts with bottom end encased in 450mm x 450mm x600mm Grade 20 concrete foundation, the gates hung on2 Nos. pairs approved hooks and ride hinges and fittedwith approved locking bolt including all necessary weldingand painting. (Nett area of leaf measured).
m² $62.70 N001
12.02 Standard metal collapsible gates of approvedmanufacture including all necessary fixing lugs, guiderails, rollers and gate locks etc.
m² $147.10 N002
(b) Chain Link Fencing
3.175mm thick gauge x 50mm mesh PVC chain linkfencing of the following height to top of mesh with 3Nos. horizontal lines of double strand 2.517mm BGgalvanised barbed wires of 2- ply 4 point above at 100mm centres, the chain link and barbed wires fixed toand including 50mm x 50mm x 6mm angle iron postsat 3m centres with top bent to form spurs and bottomcast into 300mm x 300mm x 450mm deep Grade 20cast into 300mm x 300mm x 450mm deep Grade 20concrete foundations including all necessarystraining wires and split pins and priming andpainting posts with two coats aluminium paint:
12.03 1.20m high. m $36.60 N003
12.04 1.50m high. m $40.60 N004
12.05 1.80m high. m $45.50 N005
12.06 2.10m high. m $56.00 N006
12.07 2.40m high. m $63.90 N007
(c) Temporary Fencing
12.08 Temporary fencing 1.20m high consisting of 6 Noslongitudinal lines of galvanised double strand 2.517mmBG barbed wire stapled 150mm and 225mm apart, asshown in drawings and including 80mm diameter bakauposts with pointed bottom and driven 450mm deep intoground at 3.0m centres.
m $12.30 N009
Page 72 of 82
HOUSING AND DEVELOPMENT BOARDSTANDARD SCHEDULE OF RATES FOR CIVIL ENGINEERING WORKS (JUL 2013)
S/N DESCRIPTION UNIT RATE ($) CODE
12.09 Temporary fencing 1.20m high consisting of 3 Noshorizontal lines of galvanised doubled strand 2.517mmBG barbed wire stapled 300mm apart to and including100 mm diameter bintangore posts with pointed bottomand driven 450mm deep into ground at 2.40m centres.
m $8.20 N010
12.10 Temporary fencing 1.20m high consisting of 6 Noshorizontal lines of galvanised doubled strand 2.517mmBG barbed wire stapled 150mm apart to and including100 mm diameter bintangore posts with pointed bottomand driven 1.0m deep into ground at 2.50m centres.
m $12.60 N027
12.11 Dismantling and removing chain link fencing 1.5m highincluding breaking up of foundation etc.
m $12.90 N011
12.12 Add to last item for each additional 300mm height. m $2.00 N012
12.13 20mm thick temporary wooden fence vertically spacedalternately with 100mm x 100mm vertical standard at2.5m centres to centres spaces with 2 Nos. of 100mm x50mm horizontal guides to a height 1.500m, using sawntimber with wood preservative.
m $35.10 N013
13. SITE CLEARANCE, TURFING AND TREE-PLANTING
(a) Site Clearance
13.01 To clear and cart away debris from site to approved ENVdumping ground.
ton $97.30 L010
13.02 Clearing and disposal of bush, belukar, holes and anyother undergrowth etc from site including removing fromsite and dumping at approved dumping ground.
m² $4.00 L011
Cut down trees with girth measured at a point 1.0mabove the ground, grub up roots and clear away fromsite:
13.03 Not exceeding 0.5m girth. no $208.30 CE14001
13.04 Exceeding 0.5m but not exceeding 1.0m girth. no $256.50 L012
13.05 Exceeding 1.0m but not exceeding 1.5m girth. no $341.20 L013
Page 73 of 82
HOUSING AND DEVELOPMENT BOARDSTANDARD SCHEDULE OF RATES FOR CIVIL ENGINEERING WORKS (JUL 2013)
S/N DESCRIPTION UNIT RATE ($) CODE
Cut down trees with girth measured at a point 1.0mabove the ground, grub up roots and clear away fromsite (Cont'd):
13.06 Exceeding 1.5m but not exceeding 2.0m girth. no $509.80 L014
13.07 Exceeding 2.0m but not exceeding 2.5m girth. no $647.10 L015
13.08 Exceeding 2.5m but not exceeding 3.0m girth. no $845.70 L016
13.09 Exceeding 3.0m but not exceeding 4.0m girth. no $1,050.90 L017
13.10 Exceeding 4.0m but not exceeding 5.0m girth. no $1,326.80 L018
13.11 Exceeding 5.0m but not exceeding 6.0m girth. no $1,590.70 L019
(b) Turfing
13.12 Labour for trimming and forming embankments. m² $2.20 M002
13.13 225x225mm spot turfing (with 25mm thick original topsoil) at 450mm centre both directions with a layer ofapproved soil mixture 125mm thick including themaintenance of the turfing works during the "MaintenancePeriod" as specified.
m² $7.10 SM002A
13.14 Strip turfing (with 25mm thick original top soil) 450mmwide and spaced 600mm between strips at an angle of 45
m² $10.60 SM004Ap p g
degree on embankments with a layer of approved soilmixture 125mm thick including the maintenance of theturfing works during the "Maintenance Period" asspecified.
Close turfing (with 25mm thick original top soil)including the maintenance of the turfing works duringthe "Maintenance Period" as specified:
13.15 To slope embankment with a layer of 125mm thick approved soil mixture.
m² $13.10 SM009
13.16 To flat level surfaces with a layer of 125mm thick approved soil mixture.
m² $12.20 SM011
13.17 To slope embankment with a layer of 225mm thick approved soil mixture.
m² $14.80 CE14002
13.18 To flat level surfaces with a layer of 225mm thick approved soil mixture.
m² $13.80 CE14003
13.19 Grass cutting at aeration slabs including weeding, sweepand remove cut grass off site. (Includes area occupiedby aeration slabs but exclude concrete lining).
m² $0.30 M038
Page 74 of 82
HOUSING AND DEVELOPMENT BOARDSTANDARD SCHEDULE OF RATES FOR CIVIL ENGINEERING WORKS (JUL 2013)
S/N DESCRIPTION UNIT RATE ($) CODE
13.20 Grass cutting including weeding on level ground or slopeembankments, sweep and remove cut grass off site andtrimming edges at drain kerbs and roadsides, etc.
m² $0.10 M053
(c) Tree Pruning
Trimming of tree branches terminals and clearing of cut branches, debris etc from site. (The height of tree measured from tree base to the highest growing point of tree before pruning):
13.21 Tree height not exceeding 2m. p/tree $6.40 CE14004
13.22 Tree height exceeding 2m but not exceeding 3m. p/tree $16.50 CE14005
13.23 Tree height exceeding 3m but not exceeding 6m. p/tree $46.50 CE14006
13.24 Tree height exceeding 6m but not exceeding 9m (truck mounted hydraulic platform measured separately).
p/tree $63.20 CE14007
13.25 Tree height exceeding 9m but not exceeding 12m (truck mounted hydraulic platform measured separately).
p/tree $94.50 CE14008
13.26 Tree height exceeding 12m but not exceeding 15m (truck mounted hydraulic platform measured
p/tree $146.20 CE14009(truck mounted hydraulic platform measured separately).
13.27 Tree height exceeding 15m (truck mounted hydraulic platform measured separately).
p/tree $198.20 CE14010
(d) Tree Planting
13.28 Excavate trench to form shrub/flower bed, includingbackfilling to level about 250mm above the adjacentground level with approved soil mixture as specified(plants measured separately).
m³ $47.40 SM018
Excavate tree hole including backfill to a level 250mmabove ground with approved soil mixture as specified(tree measured separately):
13.29 1.50 x 1.50 x 1.00m deep. no $104.90 SM078
13.30 1.00 x 1.00 x 1.00m deep. no $46.60 SM077
13.31 0.50 x 0.50 x 0.50m deep. no $6.60 SM079
Page 75 of 82
HOUSING AND DEVELOPMENT BOARDSTANDARD SCHEDULE OF RATES FOR CIVIL ENGINEERING WORKS (JUL 2013)
S/N DESCRIPTION UNIT RATE ($) CODE
Planting of instant tree including maintenance asspecified (tree measured separately):
13.32 Not exceeding 300mm girth. no $4.20 SM080
13.33 Exceeding 300mm but not exceeding 500mm girth. no $5.50 SM081
Planting of tree saplings/fruit trees/palms includingmaintenance as specified (tree measured separately):
13.34 Large size with minimun height 2.00m. no $3.50 SM082
13.35 Medium size with minimun height 1.50m. no $2.80 SM083
13.36 Small size with minimun height 1.00m. no $2.10 SM084
13.37 Planting of shrubs of any size including maintenance asspecified (shrub measured separately).
no $1.10 SM085
13.38 Approved good quality top soil (From contractor's ownsource).
m³ $28.80 Q016
13.39 Tree guard with minimum 50mm diameter Bintangorepoles tied together with galvanised wire bracing as shownin drawings.
no $21.90 SM041
Approved green plastic netting surrounding all the sides of tree guard to a height of 200mm above the ground:
13.40 Single layer. m2 $1.40 SM043
13.41 Double layer. m2 $2.90 SM044
13.42 Loamy soil to planting strip as shown in drawings. m³ $42.90 Q018
13.43 Trough of uniform 20mm aggregate wrapped withsynthetic fabric membrane all round as shown indrawings.
m³ $55.30 Q019
13.44 100mm diameter x 650mm long UPVC perforated pipe toSS141 with PVC perforated cover and galvanised steelclearing plate as shown in drawings.
no $11.10 Q020
Page 76 of 82
HOUSING AND DEVELOPMENT BOARDSTANDARD SCHEDULE OF RATES FOR CIVIL ENGINEERING WORKS (JUL 2013)
S/N DESCRIPTION UNIT RATE ($) CODE
14. REPAIR WORKS SECTION
(a) Break-up and replacement
Break up and remove from site existing surfaceobstruction consisting of the following materials:
14.01 Bituminous surfacing including granite sub-base. m³ $50.00 J065
14.02 Reinforced concrete. m³ $138.60 J066
14.03 Mass concrete. m³ $111.00 J067
14.04 Brickwork and blockwork. m³ $73.90 J068
14.05 Scarify existing road surfacing 75mm deep and removeall scarified materials and brush clean road base toreceive new surfacing.
m² $6.40 J047
Cold mill existing road surfacing and remove allmilled materials and brush clean road base to receivenew surfacing:
14.06 Not exceeding 25mm deep. m² $4.20 J069
14.07 Exceeding 25mm but not exceeding 50mm deep. m² $5.10 J063
14 08 E di 50 b t t di 75 d ² $6 70 J06414.08 Exceeding 50mm but not exceeding 75mm deep. m² $6.70 J064
14.09 Break up existing roadside kerb size 125mm x 300mmincluding concrete foundation and remove debris fromsite.
m $21.80 A011
14.10 Add to (or deduct) from last item for each size over orbelow 0.01 m2 cross sectional area of kerb.
m $4.20 A012
14.11 Take out precast concrete paving / revetment slabs(thickness not exceeding 200mm) and stack up for re-use.
m² $8.70 J012
14.12 Select from stack and lay precast concretepaving/revetment slabs (thickness not exceeding 200mm)including the provision of 50mm bed of granite dust orunwashed sand.
m² $8.30 J013
14.13 Take up precast concrete paving slabs (thickness notexceeding 200mm) to footpaths and replace oncompletion including laying a layer of 50mm sand bed.
m² $14.70 A009
Page 77 of 82
HOUSING AND DEVELOPMENT BOARDSTANDARD SCHEDULE OF RATES FOR CIVIL ENGINEERING WORKS (JUL 2013)
S/N DESCRIPTION UNIT RATE ($) CODE
14.14 Take out precast aeration / perforated interlockingconcrete turf paving slabs (thickness not exceeding200mm) including removal of earth and turf and stack upfor re-use.
m² $8.90 K021
14.15 Take out precast aeration / perforated interlockingconcrete turf paving slabs (thickness not exceeding200mm) including removal of earth and turf and cart awayfrom site.
m² $4.40 CE15028
14.16 Select from stack and lay precast aeration / perforatedinterlocking concrete turf paving slabs (thickness notexceeding 200mm) including 40mm thick bed of granitefines and filling all voids with approved soil mixture andturf.
m² $24.90 K022
14.17 Take out interlocking concrete paving blocks (thicknessnot exceeding 200mm) and cart away materials from site.
m² $5.40 CE15029
14.18 Removal of encrusted top soil and earth (averagethickness not exceeding 200mm) from slots and gapsbetween aeration slabs and replace with approved soilmixture and turf (measured as area of aeration slabs).
m² $8.60 K023
14.19 Take up concrete revetment slabs (thickness notexceeding 200mm) and inverts to surface water drainsand reinstating to the satisfaction of the S.O.'s
m $27.80 A010
representative on completion. Allow for dealing with allwater in the drains by pumping or by diversion.
14.20 Take out precast concrete composite drain channel (sizenot exceeding 500mm wide) and stack up for re-use.
m $12.80 J014
14.21 Select from stack and lay precast concrete compositedrain channel (size not exceeding 500mm wide) includingjointing in cement mortar (1:3).
m $13.80 J015
(b) Refixing handrailings
Materials and labour for re-fixing of handrailing (2rows) including foundation, cutting of pipes etc and 3coats of approved paint (Rate excludes cost ofhandrailing).
14.22 40mm diameter handrailing. m $23.50 M048
14.23 50mm diameter handrailing. m $24.00 M025
14.24 65mm diameter handrailing. m $24.90 M049
Page 78 of 82
HOUSING AND DEVELOPMENT BOARDSTANDARD SCHEDULE OF RATES FOR CIVIL ENGINEERING WORKS (JUL 2013)
S/N DESCRIPTION UNIT RATE ($) CODE
(c) Erasing roadline and markings
Erase off existing road lines and markings in the coldstate with a road line erasing machine includingsweeping all shavings off the road:
14.25 100mm wide line. m $1.70 O039
14.26 Single 100mm wide zig-zag line (measured straight along the edge of road/kerb).
m $1.40 CE15033
14.27 Double 100mm wide zig-zag line (measured straight along the edge of road/kerb).
m $2.80 CE15034
14.28 150mm wide line. m $2.50 O040
14.29 200mm wide line. m $4.10 O041
14.30 300mm wide line. m $6.80 O042
14.31 455mm wide line. m $10.80 CE15035
14.32 Single traffic arrow / Merging arrow. no $43.50 O043
14.33 Double traffic arrow. no $51.50 O044
14.34 Triple traffic arrow. no $60.70 O045
14.35 Standard letterings/markings 2520mm height. no $37.10 CE15030
14.36 Standard letterings/markings 1000mm height. no $12.00 CE15053
14.37 Standard letterings/markings 310mm height. no $7.90 CE15031
14.38 Standard numerals 180mm height. no $4.60 CE15032
14.39 Pedestrian crossings and other road markings exceeding 455mm wide.
m² $18.40 O048
Page 79 of 82
HOUSING AND DEVELOPMENT BOARDSTANDARD SCHEDULE OF RATES FOR CIVIL ENGINEERING WORKS (JUL 2013)
S/N DESCRIPTION UNIT RATE ($) CODE
15. DAYWORKS
Provide the undermentioned labour and ConstructionEquipment (Operator and fuel included) and materialsas may be ordered in writing by the S.O.'sRepresentative.
(a) Labour(excluding profit & overhead)
15.01 Bricklayer. hr $11.90 SN001
15.02 Carpenter. hr $13.40 SN003
15.03 Concretor. hr $12.50 SN004
15.04 Drainlayer. hr $12.40 SN006
15.05 Fitter. hr $14.40 SN008
15.06 Labourer. hr $8.60 SN012
15.07 Mason. hr $11.90 SN014
15.08 Painter. hr $11.70 SN016
15.09 Pavior. hr $12.20 SN017
15 10 Roller Driver hr $17 30 SN02215.10 Roller Driver. hr $17.30 SN022
15.11 Steel Bender & Fixer. hr $12.60 SN025
15.12 Watchman. hr $10.70 SN029
15.13 Welder. hr $11.40 SN030
Page 80 of 82
HOUSING AND DEVELOPMENT BOARDSTANDARD SCHEDULE OF RATES FOR CIVIL ENGINEERING WORKS (JUL 2013)
S/N DESCRIPTION UNIT RATE ($) CODE
(b) Construction equipment (excluding profit &overhead)
15.14 Air blower - 300mm diameter, 230V complete with 5mduct e.g. Kenki model AP3 (including generator and multi-gas monitor).
hr $69.90 SN082
15.15 Air compressor with air deliver of 4.5 cu m/ per minuteand working pressure of 7 kg/cm2 including pneumatictools, fuel and tool sharpening (no labour).
hr $24.70 SN032
15.16 Concrete mixer - 200/140 litres capacity including fuel. hr $15.60 SN033
15.17 Concrete mixer - 300/200 litres ditto. hr $22.90 SN034
15.18 Crane (KATO KR20H) including fuel and driver. hr $118.10 SN050
15.19 Crawler excavator with back hoe or dragline 0.85 m3
bucket including fuel and driver. e.g. Kobe 907.
hr $101.60 SN063
15.20 Crawler mounted crane 25 tonne lifting capacity includingfuel and driver.
hr $106.60 SN079
15.21 Diamond cutter including fuel and driver. hr $23.50 SN061
15.22 Diesel dumper not exceeding 0.75 cu m capacityincluding fuel and driver.
hr $32.70 SN058
15.23 Diesel powered field welding machine with minimumcapacity 300 amp.
hr $15.40 SN036
15.24 Kobe 904 with breaker including fuel and driver. hr $108.00 SN056
15.25 Kobe 907 with breaker ditto. hr $122.60 SN057
15.26 Lorry crane (up to 3 tonne) including fuel and driver. hr $43.60 SN067
15.27 Ditto - (5.5 to 7 tonne) ditto. hr $58.00 SN068
15.28 Ditto - (up to 10 tonne) ditto. hr $81.50 SN069
15.29 Mechanical rammer with impact force not exceeding 4000kg per blow.
hr $20.20 SN080
15.30 Mechanical road sweeper with a minimum rating of 44 hpincluding fuel and driver.
hr $89.10 SN060
Page 81 of 82
HOUSING AND DEVELOPMENT BOARDSTANDARD SCHEDULE OF RATES FOR CIVIL ENGINEERING WORKS (JUL 2013)
S/N DESCRIPTION UNIT RATE ($) CODE
15.31 Mini-backhoe excavator (not exceeding 0.2 cu m)including fuel and driver. eg Airman HS20S.
hr $41.70 SN062
15.32 Motor crane (5 ton lifting capacity) including fuel anddriver.
hr $59.90 SN078
15.33 Motor crane (8 - 13 tonne lifting capacity) including fueland driver.
hr $75.70 SN051
15.34 Motor grader - 3650mm blade (101 kw range) includingfuel and driver e.g. 120 G Tractor.
hr $89.50 SN070
15.35 Ditto - 4270mm blade (134 kw range) ditto. hr $96.20 SN071
15.36 Ditto - 4880mm blade (186 kw range) ditto. hr $111.40 SN072
15.37 Motor lorry (pick-up) 1.50 tonne size including fuel &driver.
hr $27.30 SN053
15.38 Motor lorry 2.5 - 3 tonne size ditto. hr $30.10 SN039
15.39 Motor lorry or Tipper 5.5 - 7.0 tonne size ditto. hr $48.60 SN040
15.40 Motor lorry or Tipper 10 tonne size ditto. hr $57.90 SN052
15.41 Oxy-acetylene cutter including welder. hr $47.90 SN081
15.42 Power driven pump - 50mm size including fuel. hr $21.50 SN041
15.43 Power driven pump - 75mm size ditto. hr $27.30 SN042
15.44 Power driven pump - 100mm size ditto. hr $27.80 SN054
15.45 Power driven pump - 150mm size ditto. hr $30.10 SN055
15.46 Power wheel loader of 1.5 cu m bucket capcity includingfuel and driver. Flywheel horsepower 100HP (range) e.g.Cat 930.
hr $81.40 SN065
15.47 Ditto but exceeding 1.5 cu m bucket capacity but notexceeding 2.5 cu m capacity including ditto. Flywheelhorsepower 130HP (range) e.g. Cat 950.
hr $86.20 SN066
15.48 Road roller 8 to 10 tonne capacity including fuel anddriver.
hr $42.10 SN045
15.49 Road roller vibrating 10 to 20 tonne capacity includingfuel and driver.
hr $43.00 SN083
15.50 Tandem roller 1 tonne capacity including fuel and driver. hr $20.20 SN059
Page 82 of 82
HOUSING AND DEVELOPMENT BOARDSTANDARD SCHEDULE OF RATES FOR CIVIL ENGINEERING WORKS (JUL 2013)
S/N DESCRIPTION UNIT RATE ($) CODE
15.51 To provide collision attenuator or truck mountedattenuator (TMA) attached/fitted/mounted onto anappropriate shadow vehicle complete with signboards,blinkers, lights, cones, etc and all necessary equipmentfor traffic control and road safety all in accordance withLTA's Code of Practice on Temporary Traffic Control.(Rate is only applicable by way of works instruction orworks order given by SO Rep).
Per day $450.00 SN084
15.52 Track type tractors as bulldozer or ripper FlywheelHorsepower (67 kw range) including fuel and driver e.g.CAT D5.
hr $87.80 SN073
15.53 Ditto (104 kw range) ditto. e.g. CAT D6D. hr $102.20 SN074
15.54 Ditto (149 kw range) ditto. e.g. CAT D7. hr $111.40 SN075
15.55 Ditto (224 kw range) ditto. e.g. CAT D8. hr $167.10 SN076
15.56 Ditto (306 kw range) ditto. e.g. CAT D9H. hr $179.70 SN077
15.57 Traxacavator - 1.0 cu m bucket capacity range includingfuel and driver. e.g. CAT 933.
hr $84.80 SN046
15.58 Ditto - 1.5 cu m ditto. e.g. CAT 955. hr $91.40 SN047
15.59 Ditto - 2.0 cu m ditto. e.g. CAT 977. hr $112.90 SN048
15.60 Ditto - 3.6 cu m ditto. e.g. CAT 983. hr $141.20 SN064
15.61 Wheel or crawler shovel or excavator loaders with backhoe bucket not exceeding 0.4 cu m or 1.30 cu m loaderbuckets capacity including fuel and driver. e.g. Kobe904, JCB.
hr $80.60 SN049
HOUSING AND DEVELOPMENT BOARD
STANDARD SCHEDULE OF RATES
FOR
ELECTRICAL WORKS (JUL 2013)
CONTENTS
S/N DESCRIPTION PAGE
GENERAL PREAMBLES 1- 3
ELECTRICAL INSTALLATIONS
A POINT WIRING 4 - 6
B POWER/HEATER POINT 7 - 11
C CIRCUIT WIRING 11 - 18
D CABLE SUPPORT SYSTEMS 19 - 21
E ELECTRICAL ACCESSORIES 22 - 29
F LUMINAIRES 29 -30
G LIGHTNING CONDUCTORS AND EARTH RODS 30 - 31
H EXTERNAL LIGHTING 32 - 63
I EMERGENCY/EMERGENCY EXIT SIGN LUMINAIRES 63 - 64
J FIRE ALARM ACCESSORIES 65
K TELEVISION SYSTEM 66 -69
Published by Housing and Development Board, Republic of Singapore
No part of this document may be reproduced or copied in any form or
by any means without the prior written permission of the publisher.
Page 1 of 69
GENERAL PREAMBLES 1 Introduction 1.1 The clauses in the General Preambles shall apply to all work items
contained in the Standard Schedule of Rates. 1.2 All rates include the allowances for complying with the General
Preambles. 2 All rates contained in the Standard Schedule of Rates are fixed basic
rates (in Singapore Currency) and no amendment whatsoever shall be made to such rates. The tenderers shall be deemed to have closely studied all rates contained herein and duly noted their implications.
3 All rates contained in the Standard Schedule of Rates are exclusive of
any Goods and Services Tax. Any such Goods and Services Tax shall be borne by the HDB as and when the same becomes due and payable.
4 All work, materials and goods described in this Standard Schedule of
Rates shall be of the respective kinds described in the Contract and in accordance with the instructions of the Superintending Officer or the Superintending Officer's Representative.
5 Headings to groups of items shall be read as part of the descriptions of
the items to which the headings apply. 6 Where brand/trade names are given in the descriptions, they are solely
intended for fixing the rates of the items. The products and materials to be used in the contract shall be governed by the specifications, drawings and other documents forming the contract (and not this Schedule of Rates).
7 Description of Works and Inclusions Unless specifically stated otherwise, the following shall be deemed to
be included in the description of the item of work:-
a) Labour and all costs in connection therewith including the labour in fabricating, assembling, setting, fitting and fixing of materials and goods in position.
b) Materials and goods including materials required for lapping,
jointing and the like and all costs in connection therewith such as conveyance, delivery, unloading, storing, returning of packings, handling, hoisting and lowering.
Page 2 of 69
GENERAL PREAMBLES 7 Description of Works and Inclusions (Cont'd) c) Preparing surfaces to receive work.
d) Protecting materials and work.
e) Waste of materials.
f) All cutting and waste.
g) Use of construction equipment, tools, vehicles and all costs in connection therewith.
h) Cleaning up on completion and making good all work disturbed.
i) General requirements set out in the Specifications, Drawings
and other documents forming the Contract.
j) Establishment charges, overhead and profit. 8 The description of each item of work shall be deemed to include all
screws, nails, bolts, nuts, nipples, fixing or supporting clips, saddles, brackets, straps, rivets, plugs and the like and all incidental accessories, chases, holes, mortises, cutting away plugging and making good of walls, ceilings and other structural features where necessary.
9 All metal conduits shall be deemed to include socket joints. 10 Unless otherwise stated, all work shall be measured nett as fixed in its
place. 11 Unless otherwise stated, pipes are described by their internal
diameters. 12 Where minimum deductions of voids are dealt with in this document
they shall refer only to openings or voids which are within the boundaries of measured area. Openings or voids which are at the boundaries of area shall always be the subject of deductions irrespective of size.
13 Billing of Quantities 13.1 Where the unit of measurement is the linear metre, square metre and
cubic metre, quantities shall be billed to the nearest whole unit. Fractions of the unit less than half shall be disregarded and all other fractions shall be regarded as a whole unit.
Page 3 of 69
GENERAL PREAMBLES
13 Billing of Quantities (Cont'd)
13.2 Where the unit of measurement is the kilogramme, quantities shall be billed to the nearest whole unit. Fractions of a unit less than half shall be disregarded and all other fractions shall be regarded as a whole unit. Where the unit of billing is the tonne or litre, quantities shall be billed to the nearest two places of decimals.
13.3 Where the unit of measurement is the hour, fractions of the unit shall
be billed to the nearest next half hour. 13.4 Where the application of clauses 13.1 and 13.2 would cause an entire
item to be eliminated, such item shall be billed to the nearest two places of decimals.
14 Where rates with descriptions pertain to the same purpose are listed in
more than one Standard Schedule of Rates incorporated in the Contract; the rate as listed in the following schedules (in the stated order of precedence) shall prevail:-
1st Precedence Standard Schedule of Rates for Building
Works
2nd Precedence Standard Schedule of Rates for Civil Engineering Works
3rd Precedence Standard Schedule of Rates for Electrical Works
15 Unless otherwise stated, the term "as specified" means as specified in
any of the documents forming part of the Contract. 16 The following abbreviations are used for the units:- m - Linear metre m2 - Square metre m3 - Cubic metre no - Number kg - Kilogram ton - Tonne pr - Pair sht - Sheet ltr - Litre hr - Hour
Page 4 of 69
HOUSING AND DEVELOPMENT BOARDSTANDARD SCHEDULE OF RATES FOR ELECTRICAL WORKS (JUL 2013)
S/N DESCRIPTION UNIT RATE($) CODE
ELECTRICAL INSTALLATION
A POINT WIRING
Wiring In PVC Trunking
Surface wiring in 2x1.5mm² PVC cable and 1.5mm²earth cable in PVC trunking including accessories butexcluding fittings, fan regulators and fans:
1 One lighting or fan point controlled by one switch (to a distance not exceeding 12m).
no $61.40 SZ001
2 Each additional point to item SZ001 (to a distance not exceeding 5m).
no $26.70 SZ002
3 Each additional point to item SZ001 (to a distance exceeding 5m but not exceeding 10m).
no $44.80 SZ003
4 One lighting point controlled by two 2-way switches (to a distance not exceeding 12m).
no $77.80 SZ004
Surface wiring in 2x1.5mm² PVC/PVC cable and 1.5mm² earth cable in PVC trunking including accessories butexcluding light fittings, fan regulators and fans:
5 One lighting or fan point controlled by one switch (to adistance not exceeding 12m).
no $67.60 SZ005
6 Each additional point to item SZ005 (to a distance not exceeding 5m).
no $29.30 SZ006
7 Each additional point to item SZ005 (to a distance exceeding 5m but not exceeding 10m).
no $50.00 SZ007
8 One lighting point controlled by two 2-way switches (to a distance not exceeding 12m).
no $86.10 SZ008
Wiring in Metal Conduit
Surface wiring in 2x1.5mm² PVC cable and 1.5mm²earth cable in 20mm diameter metal conduit includingaccessories but excluding light fittings, fan regulatorsand fans:
9 One lighting or fan point controlled by one switch (to adistance not exceeding 12m).
no $111.50 SZ009
Page 5 of 69
HOUSING AND DEVELOPMENT BOARDSTANDARD SCHEDULE OF RATES FOR ELECTRICAL WORKS (JUL 2013)
S/N DESCRIPTION UNIT RATE($) CODE
A POINT WIRING (CONT'D)
Wiring in Metal Conduit (Cont'd)
Surface wiring in 2x1.5mm² PVC cable and 1.5mm²earth cable in 20mm diameter metal conduit includingaccessories but excluding light fittings, fan regulatorsand fans (Cont'd):
10 Each additional point to item SZ009 (to a distance not exceeding 5m).
no $42.90 SZ010
11 Each additional point to item SZ009 (to a distance exceeding 5m but not exceeding 10m).
no $81.90 SZ011
12 One lighting point controlled by two 2-way switches (to a distance not exceeding 12m).
no $132.60 SZ012
Surface wiring in 2x1.5mm² PVC/PVC cable and 1.5mm² earth cable in 20mm metal conduit includingaccessories but excluding light fittings, fan regulatorsand fans:
13 One lighting or fan point controlled by one switch (to adistance not exceeding 12m).
no $117.70 SZ013
14 Each additional point to item SZ013 (to a distance not exceeding 5m).
no $48.50 SZ014
15 Each additional point to item SZ013 (to a distance exceeding 5m but not exceeding 10m).
no $87.10 SZ015
16 One lighting point controlled by two 2-way switches (to a distance not exceeding 12m).
no $140.90 SZ016
Concealed Wiring In PVC Pipe Conduit
Concealed wiring in 2x1.5mm² PVC cable and 1.5mm²earth cable, drawn through and including 20mmdiameter PVC pipes cast/embedded in slab/wallcomplete with all necessary tees, connectors, outletjunction box and accessories but excluding fittings,fan regulators and fan:
17 One lighting or fan point controlled by one switch (to a distance not exceeding 12m).
no $60.30 SZ909
Page 6 of 69
HOUSING AND DEVELOPMENT BOARDSTANDARD SCHEDULE OF RATES FOR ELECTRICAL WORKS (JUL 2013)
S/N DESCRIPTION UNIT RATE($) CODE
A POINT WIRING (CONT'D)
Concealed Wiring In PVC Pipe Conduit
Concealed wiring in 2x1.5mm² PVC cable and 1.5mm²earth cable, drawn through and including 20mmdiameter PVC pipes cast/embedded in slab/wallcomplete with all necessary tees, connectors, outletjunction box and accessories but excluding fittings,fan regulators and fan (Cont'd):
18 Each additional point to item SZ909 (to a distance not exceeding 5m).
no $24.90 SZ910
19 Each additional point to item SZ909 (to a distance exceeding 5m but not exceeding 10m).
no $42.50 SZ911
20 One lighting point controlled by two 2-way switches (to a distance not exceeding 12m).
no $77.60 SZ912
Concealed wiring in 2x1.5mm² PVC cable and 1.5mm²earth cable, drawn through and including 25mmdiameter PVC pipes cast/embedded in slab/wallcomplete with all necessary tees, connectors, outletjunction box and accessories but excluding fittings,fan regulators and fan:
21 One lighting or fan point controlled by one switch (to a distance not exceeding 12m).
no $62.80 SZ913
22 Each additional point to item SZ913 (to a distance not exceeding 5m).
no $26.00 SZ914
23 Each additional point to item SZ913 (to a distance exceeding 5m but not exceeding 10m).
no $44.60 SZ915
24 One lighting point controlled by two 2-way switches (to a distance not exceeding 12m).
no $81.70 SZ916
25 Bell point complete with concealed wiring in 2x1.5mm2 PVC cable and 1.5mm2 PVC earth cable drawn through and including 20mm diameter PVC pipes embedded in slab/wall complete with all necessary tees, connectors, outlet junction and accessories but excluding bell (to a distance not exceeding 12m).
no $61.70 SZ960
Page 7 of 69
HOUSING AND DEVELOPMENT BOARDSTANDARD SCHEDULE OF RATES FOR ELECTRICAL WORKS (JUL 2013)
S/N DESCRIPTION UNIT RATE($) CODE
B POWER/HEATER POINT
Wiring In PVC Trunking
13 amp 1-gang white switch socket-outlet completewith mounting box in 60x20mm PVC multi-compartment trunking including accessories:
26 Surface wiring in 2x2.5mm² PVC cable and 2.5mm² earth cable (to a distance not exceeding 12m).
no $71.10 SZ017
27 Each additional point to item SZ017 (to a distance not exceeding 5m).
no $35.30 SZ310
28 Each additional point to item SZ017 (to a distance exceeding 5m but not exceeding 10m).
no $58.00 SZ311
29 Surface wiring in 2x2.5mm² PVC/PVC cable and 2.5mm² earth cable (to a distance not exceeding 12m).
no $78.20 SZ018
30 Each additional point to item SZ018 (to a distance not exceeding 5m).
no $38.20 SZ312
31 Each additional point to item SZ018 (to a distance exceeding 5m but not exceeding 10m).
no $63.90 SZ313
13 amp 2-gang white switch socket-outlet completewith mounting box in 60x20mm PVC multi-compartment trunking including accessories:
32 Surface wiring in 2x2.5mm² PVC cable and 2.5mm² earth cable (to a distance not exceeding 12m).
no $76.70 SZ470
33 Each additional point to item SZ470 (to a distance not exceeding 5m).
no $40.90 SZ471
34 Each additional point to item SZ470 (to a distance exceeding 5m but not exceeding 10m).
no $63.60 SZ472
35 Surface wiring in 2x2.5mm² PVC/PVC cable and 2.5mm² earth cable (to a distance not exceeding 12m).
no $83.80 SZ473
Page 8 of 69
HOUSING AND DEVELOPMENT BOARDSTANDARD SCHEDULE OF RATES FOR ELECTRICAL WORKS (JUL 2013)
S/N DESCRIPTION UNIT RATE($) CODE
B POWER/HEATER POINT (CONT'D)
Wiring In PVC Trunking (Cont'd)
13 amp 2-gang white switch socket-outlet completewith mounting box in 60x20mm PVC multi-compartment trunking including accessories (Cont'd):
36 Each additional point to item SZ473 (to a distance not exceeding 5m).
no $43.80 SZ474
37 Each additional point to item SZ473 (to a distance exceeding 5m but not exceeding 10m).
no $69.50 SZ475
15 amp switch socket-outlet complete with mountingbox in 60x20mm PVC multi-compartment trunkingincluding accessories (to a distance not exceeding12m):
38 Surface wiring in 2x2.5mm² PVC cable and 2.5mm² PVC earth cable.
no $78.40 SZ021
39 Surface wiring in 2x2.5mm² PVC/PVC cable and 2.5mm² PVC earth cable.
no $85.40 SZ022
Wiring in Metal Conduit
13 amp 1-gang metal-clad switch socket-outletcomplete with mounting box in 20mm diameter metalconduit including socket joints and other accessories:
40 Surface wiring in 2x2.5mm² PVC cable and 2.5mm² earth cable (to a distance not exceeding 12m).
no $113.60 SZ019
41 Each additional point to item SZ019 (to a distance not exceeding 5m).
no $56.30 SZ314
42 Each additional point to item SZ019 (to a distance exceeding 5m but not exceeding 10m).
no $97.00 SZ315
43 Surface wiring in 2x2.5mm² PVC/PVC cable and 2.5mm² earth cable (to a distance not exceeding 12m).
no $120.70 SZ020
Page 9 of 69
HOUSING AND DEVELOPMENT BOARDSTANDARD SCHEDULE OF RATES FOR ELECTRICAL WORKS (JUL 2013)
S/N DESCRIPTION UNIT RATE($) CODE
B POWER/HEATER POINT (CONT'D)
Wiring in Metal Conduit (Cont'd)
13 amp 1-gang metal-clad switch socket-outletcomplete with mounting box in 20mm diameter metalconduit including socket joints and other accessories(Cont'd):
44 Each additional point to item SZ020 (to a distance not exceeding 5m).
no $59.20 SZ316
45 Each additional point to item SZ020 (to a distance exceeding 5m but not exceeding 10m).
no $102.90 SZ317
13 amp 2-gang metal-clad switch socket-outletcomplete with mounting box in 20mm diameter metalconduit including socket joints and other accessories:
46 Surface wiring in 2x2.5mm² PVC cable and 2.5mm² earth cable (to a distance not exceeding 12m).
no $161.90 SZ476
47 Each additional point to item SZ476 (to a distance not exceeding 5m).
no $81.60 SZ477
48 Each additional point to item SZ476 (to a distance exceeding 5m but not exceeding 10m).
no $138.70 SZ478
49 Surface wiring in 2x2.5mm² PVC/PVC cable and 2.5mm² earth cable (to a distance not exceeding 12m).
no $168.90 SZ479
50 Each additional point to item SZ479 (to a distance not exceeding 5m).
no $84.60 SZ480
51 Each additional point to item SZ479 (to a distance exceeding 5m but not exceeding 10m).
no $144.60 SZ481
15 amp metal-clad switch socket-outlet complete withmounting box in 20mm diameter metal conduitincluding socket joints and other accessories (to adistance not exceeding 12m):
52 Surface wiring in 2x2.5mm² PVC cable and 2.5mm² PVC earth cable.
no $119.90 SZ023
53 Surface wiring in 2x2.5mm² PVC/PVC cable and 2.5mm² PVC earth cable.
no $127.00 SZ024
Page 10 of 69
HOUSING AND DEVELOPMENT BOARDSTANDARD SCHEDULE OF RATES FOR ELECTRICAL WORKS (JUL 2013)
S/N DESCRIPTION UNIT RATE($) CODE
B POWER/HEATER POINT (CONT'D)
Concealed Wiring In PVC Pipe Conduit
13 amp 1-gang white plate switch socket-outlet pointwith mounting box comprising of cables drawnthrough and including 20mm diameter PVC pipescast/embedded in slab/wall complete with tees,connectors and other accessories:
54 Concealed wiring in 2x2.5mm² PVC cable and 2.5mm² earth cable (to a distance not exceeding 12m).
no $63.20 SZ917
55 Each additional point to item SZ917 (to a distance not exceeding 5m).
no $30.80 SZ918
56 Each additional point to item SZ917 (to a distance exceeding 5m but not exceeding 10m).
no $50.20 SZ919
13 amp 1-gang white plate switch socket-outlet pointwith mounting box comprising of cables drawnthrough and including 25mm diameter PVC pipescast/embedded in slab/wall complete with tees,connectors and other accessories:
57 Concealed wiring in 2x2.5mm² PVC cable and 2.5mm² earth cable (to a distance not exceeding 12m).
no $65.70 SZ920
58 Each additional point to item SZ920 (to a distance not exceeding 5m).
no $31.90 SZ921
59 Each additional point to item SZ920 (to a distance exceeding 5m but not exceeding 10m).
no $52.20 SZ922
60 Extra over the items SZ917 to SZ919 and SZ920 to SZ922for 13-amp 2-gang white plate switch socket-outlet pointcomplete with mounting box.
no $8.90 SZ923
61 Extra over the items SZ917 to SZ919 and SZ920 to SZ922for 15-amp 1-gang white plate switch socket-outlet pointcomplete with mounting box.
no $14.40 SZ924
Page 11 of 69
HOUSING AND DEVELOPMENT BOARDSTANDARD SCHEDULE OF RATES FOR ELECTRICAL WORKS (JUL 2013)
S/N DESCRIPTION UNIT RATE($) CODE
B POWER/HEATER POINT (CONT'D)
Concealed Wiring In PVC Pipe Conduit (Cont'd)
20-Amp heater point complete with heater connectionunit and heater indication switch comprising of cablesdrawn through and including 20mm diameter PVCpipes cast/embedded in slab/wall complete with tees,connectors and other accessories:
62 Concealed wiring in 2x2.5mm² PVC cable and 2.5mm² earth cable (to a distance not exceeding 12m).
no $91.80 SZ958
63 Each additional point to item SZ958 (to a distance not exceeding 5m).
no $48.50 SZ959
C CIRCUIT WIRING
Earthing Conductors
Earth wiring including all fixings and connections(cable trunking/tray and conduits to be measuredseparately):-
64 25x3mm copper tape. m $17.00 SZ207
65 300mm² PVC earth cable. m $42.00 SZ949
66 240mm² PVC earth cable. m $33.90 SZ712
67 185mm² PVC earth cable. m $25.80 SZ713
68 150mm² PVC earth cable. m $20.50 SZ714
69 120mm² PVC earth cable. m $17.10 SZ715
70 95mm² PVC earth cable. m $13.30 SZ716
71 70mm² PVC earth cable. m $9.70 SZ717
72 50mm² PVC earth cable. m $8.60 SZ718
73 35mm² PVC earth cable. m $6.80 SZ719
74 25mm² PVC earth cable. m $4.60 SZ720
75 16mm² PVC earth cable. m $3.00 SZ721
76 10mm² PVC earth cable. m $2.10 SZ722
Page 12 of 69
HOUSING AND DEVELOPMENT BOARDSTANDARD SCHEDULE OF RATES FOR ELECTRICAL WORKS (JUL 2013)
S/N DESCRIPTION UNIT RATE($) CODE
C CIRCUIT WIRING(CONT'D)
Earthing Conductors (Cont'd)
Earth wiring including all fixings and connections(cable trunking/tray and conduits to be measuredseparately) (Cont'd):-
77 6mm² PVC earth cable. m $1.50 SZ723
78 4mm² PVC earth cable. m $1.20 SZ724
79 2.5mm² PVC earth cable. m $0.80 SZ725
80 1.5mm² PVC earth cable. m $0.70 SZ726
PVC/PVC cable
Circuit wiring including all fixings and connections(earthing conductors, cable trunking/tray and conduitsto be measured separately):
81 4x240mm² PVC/PVC cable. m $152.30 SZ319
82 4x185mm² PVC/PVC cable. m $120.40 SZ025
83 4x150mm² PVC/PVC cable. m $105.60 SZ701
84 4x120mm² PVC/PVC cable. m $80.50 SZ026
85 4x95mm² PVC/PVC cable. m $57.40 SZ027
86 4x70mm² PVC/PVC cable. m $43.80 SZ028
87 4x50mm² PVC/PVC cable. m $32.30 SZ029
88 4x35mm² PVC/PVC cable. m $25.30 SZ030
89 4x25mm² PVC/PVC cable. m $18.90 SZ031
90 4x16mm² PVC/PVC cable. m $14.70 SZ699
91 4x10mm² PVC/PVC cable. m $10.60 SZ700
92 4x6mm² PVC/PVC cable. m $7.40 SZ283
93 2x50mm² PVC/PVC cable. m $16.60 SZ032
94 2x35mm² PVC/PVC cable. m $13.10 SZ033
95 2x25mm² PVC/PVC cable. m $9.90 SZ034
Page 13 of 69
HOUSING AND DEVELOPMENT BOARDSTANDARD SCHEDULE OF RATES FOR ELECTRICAL WORKS (JUL 2013)
S/N DESCRIPTION UNIT RATE($) CODE
C CIRCUIT WIRING (CONT'D)
PVC/PVC cable (Cont'd)
Circuit wiring including all fixings and connections(earthing conductors, cable trunking/tray and conduitsto be measured separately) (Cont'd):
96 2x16mm² PVC/PVC cable. m $7.80 SZ035
97 2x10mm² PVC/PVC cable. m $5.70 SZ036
98 2x6mm² PVC/PVC cable. m $4.10 SZ037
99 2x4mm² PVC/PVC cable. m $3.40 SZ038
100 2x2.5mm² PVC/PVC cable. m $2.80 SZ039
101 2x1.5mm² PVC/PVC cable. m $2.70 SZ040
PVC cable
Circuit wiring including drawing cables throughconcealed pipe conduits complete with all necessaryfixings and connections (conduits measuredseparately):
102 2x1.5mm² PVC cable & 1.5mm² PVC earth cable. m $2.40 SZ928
103 2x2.5mm² PVC cable & 2.5mm² PVC earth cable. m $2.80 SZ929
104 2x6mm² PVC cable & 6mm² PVC earth cable. m $4.70 SZ930
105 2x10mm² PVC cable & 10mm² PVC earth cable. m $6.70 SZ931
Circuit wiring including all fixings and connections(earthing conductors, cable trunking/tray and conduitsto be measured separately):
106 4x240mm² PVC cable. m $136.40 SZ306
107 4x185mm² PVC cable. m $103.70 SZ320
108 4x150mm² PVC cable. m $82.70 SZ307
109 4x120mm² PVC cable. m $69.00 SZ321
110 4x95mm² PVC cable. m $53.90 SZ322
111 4x70mm² PVC cable. m $39.30 SZ323
112 4x50mm² PVC cable. m $34.90 SZ702
Page 14 of 69
HOUSING AND DEVELOPMENT BOARDSTANDARD SCHEDULE OF RATES FOR ELECTRICAL WORKS (JUL 2013)
S/N DESCRIPTION UNIT RATE($) CODE
C CIRCUIT WIRING (CONT'D)
PVC Cable (Cont'd)
113 4x35mm² PVC cable. m $27.60 SZ703
114 4x25mm² PVC cable. m $19.20 SZ308
115 4x16mm² PVC cable. m $12.60 SZ488
116 4x10mm² PVC cable. m $9.10 SZ309
117 2x50mm² PVC cable. m $17.90 SZ704
118 2x35mm² PVC cable. m $14.20 SZ705
119 2x25mm² PVC cable. m $10.00 SZ041
120 2x16mm² PVC cable. m $6.70 SZ042
121 2x10mm² PVC cable. m $5.00 SZ043
122 2x6mm² PVC cable. m $3.70 SZ044
123 2x4mm² PVC cable. m $3.00 SZ045
124 2x2.5mm² PVC cable. m $2.40 SZ046
125 2x1.5mm² PVC cable. m $2.10 SZ047
XLPE/PVC Cable
Circuit wiring including all fixings and connections(earthing conductors, cable trunking/tray and conduitsto be measured separately):
126 4x300mm² XLPE/PVC cable. m $204.40 SZ954
127 4x240mm² XLPE/PVC cable. m $162.90 SZ482
128 4x185mm² XLPE/PVC cable. m $123.50 SZ483
129 4x150mm² XLPE/PVC cable. m $99.90 SZ484
130 4x120mm² XLPE/PVC cable. m $84.00 SZ485
131 4x95mm² XLPE/PVC cable. m $67.50 SZ486
132 4x70mm² XLPE/PVC cable. m $50.00 SZ487
Page 15 of 69
HOUSING AND DEVELOPMENT BOARDSTANDARD SCHEDULE OF RATES FOR ELECTRICAL WORKS (JUL 2013)
S/N DESCRIPTION UNIT RATE($) CODE
C CIRCUIT WIRING (CONT'D)
Fire resistant cable
Circuit wiring including all fixings and connections(earthing conductors, cable trunking/tray and conduitto be measured separately):
133 4x150mm² fire resistant cable. m $122.20 SZ706
134 4x120mm² fire resistant cable. m $94.80 SZ707
135 4x95mm² fire resistant cable. m $77.90 SZ708
136 4x70mm² fire resistant cable. m $60.00 SZ684
137 4x50mm² fire resistant cable. m $51.30 SZ048
138 4x35mm² fire resistant cable. m $40.90 SZ049
139 4x25mm² fire resistant cable. m $33.40 SZ050
140 4x16mm² fire resistant cable. m $26.00 SZ051
141 4x10mm² fire resistant cable. m $21.10 SZ709
142 4x6mm² fire resistant cable. m $17.10 SZ710
143 4x4mm² fire resistant cable. m $12.60 SZ711
144 2x10mm² fire resistant cable. m $10.50 Z0222
145 2x6mm² fire resistant cable. m $8.50 Z0221
146 2x4mm² fire resistant cable. m $6.30 Z0220
147 2x2.5mm² fire resistant cable. m $4.80 SZ301
148 2x1.5mm² fire resistant cable. m $4.40 SZ300
Page 16 of 69
HOUSING AND DEVELOPMENT BOARDSTANDARD SCHEDULE OF RATES FOR ELECTRICAL WORKS (JUL 2013)
S/N DESCRIPTION UNIT RATE($) CODE
C CIRCUIT WIRING (CONT'D)
XLPE/SWA/PVC cable
XLPE/SWA/PVC underground armoured cable laid intrench (terminations and excavation of trench to bemeasured separately):
149 2.5mm² 2-core cable. m $4.70 SZ950
150 6mm² 2-core cable. m $6.70 SZ058
151 10mm² 2-core cable. m $10.20 SZ059
152 16mm² 2-core cable. m $12.10 SZ060
153 25mm² 2-core cable. m $16.50 SZ061
154 6mm² 3-core cable. m $8.80 SZ489
155 10mm² 3-core cable. m $11.70 SZ490
156 16mm² 3-core cable. m $15.80 SZ491
157 25mm² 3-core cable. m $21.90 SZ492
158 6mm² 4-core cable. m $10.70 SZ727
159 10mm² 4-core cable. m $13.30 SZ062
160 16mm² 4-core cable. m $19.40 SZ063
161 25mm² 4-core cable. m $27.30 SZ064
162 35mm² 4-core cable. m $35.40 SZ065
163 50mm² 4-core cable. m $45.40 SZ066
164 70mm² 4-core cable. m $69.30 SZ728
165 95mm² 4-core cable. m $87.80 SZ729
166 120mm² 4-core cable. m $111.50 SZ730
167 150mm² 4-core cable. m $133.90 SZ731
168 185mm² 4-core cable. m $163.10 SZ732
169 240mm² 4-core cable. m $211.80 SZ733
170 300mm² 4-core cable. m $253.90 SZ933
171 2.5mm² 12-core cable. m $16.90 SZ951
Page 17 of 69
HOUSING AND DEVELOPMENT BOARDSTANDARD SCHEDULE OF RATES FOR ELECTRICAL WORKS (JUL 2013)
S/N DESCRIPTION UNIT RATE($) CODE
C CIRCUIT WIRING (CONT'D)
Terminations for XLPE/SWA/PVC cable includingsealing assembly and cable gland:
172 2.5mm² 2- core cable. no $8.10 Z0223
173 6mm² 2- core cable. no $10.90 SZ067
174 10mm² 2- core cable. no $11.80 SZ068
175 16mm² 2- core cable. no $13.60 SZ069
176 25mm² 2- core cable. no $15.00 SZ070
177 6mm² 3- core cable. no $11.30 SZ493
178 10mm² 3- core cable. no $11.40 SZ494
179 16mm² 3- core cable. no $11.90 SZ495
180 25mm² 3- core cable. no $13.00 SZ496
181 10mm² 4- core cable. no $19.20 SZ071
182 16mm² 4- core cable. no $21.00 SZ072
183 25mm² 4- core cable. no $22.90 SZ073
184 35mm² 4- core cable. no $23.50 SZ074
185 50mm² 4- core cable. no $24.70 SZ075
186 70mm² 4- core cable. no $33.50 SZ691
187 95mm² 4- core cable. no $35.90 SZ692
188 120mm² 4- core cable. no $40.60 SZ693
189 150mm² 4- core cable. no $55.70 SZ694
190 185mm² 4- core cable. no $55.70 SZ695
191 240mm² 4- core cable. no $60.30 SZ906
192 300mm² 4- core cable. no $71.30 SZ934
Page 18 of 69
HOUSING AND DEVELOPMENT BOARDSTANDARD SCHEDULE OF RATES FOR ELECTRICAL WORKS (JUL 2013)
S/N DESCRIPTION UNIT RATE($) CODE
C CIRCUIT WIRING (CONT'D)
Pipe Crossings/Cover Plates
UPVC pipes Class 'B' laid in trench for crossings(trench measured separately):
193 80mm diameter UPVC pipe. m $8.10 SZ081
194 100mm diameter UPVC pipe. m $15.60 SZ082
UPVC high impact resistant cable cover plates:
195 150mm wide x 2mm thick flat cable cover plate. m $4.70 SZ260
196 150mm wide x 2mm thick angled cable cover plate. m $4.70 SZ261
Page 19 of 69
HOUSING AND DEVELOPMENT BOARDSTANDARD SCHEDULE OF RATES FOR ELECTRICAL WORKS (JUL 2013)
S/N DESCRIPTION UNIT RATE($) CODE
D CABLE SUPPORT SYSTEMS
PVC trunking
PVC trunking complete with accessories includingfixing to wall or ceiling:
197 60mm x 20mm three compartment. m $7.70 Z0224
198 80mm x 32mm twin compartment. m $8.90 SZ084
199 60mm x 20mm twin compartment. m $6.60 SZ085
200 40mm x 20mm single compartment. m $5.90 SZ086
201 40mm x 16mm single compartment. m $4.60 SZ087
202 32mm x 16mm single compartment. m $4.30 SZ088
203 25mm x 12.5mm single compartment. m $4.10 SZ089
Metal conduit
Galvanised steel conduit fixed to wall or ceilingcomplete with spacer bar saddles:
204 20mm diameter. m $18.30 SZ090
205 25mm diameter m $20.00 SZ091
206 32mm diameter. m $26.70 SZ092
207 20mm diameter inspection tee. no $3.40 SZ093
208 25mm diameter ditto. no $5.00 SZ094
209 32mm diameter ditto. no $7.00 SZ095
210 20mm diameter inspection bend. no $2.60 SZ096
211 25mm diameter ditto. no $5.00 SZ097
212 32mm diameter ditto. no $8.50 SZ098
213 20mm diameter inspection elbow. no $3.30 SZ099
214 25mm diameter ditto. no $3.80 SZ100
215 32mm diameter ditto. no $8.60 SZ101
Page 20 of 69
HOUSING AND DEVELOPMENT BOARDSTANDARD SCHEDULE OF RATES FOR ELECTRICAL WORKS (JUL 2013)
S/N DESCRIPTION UNIT RATE($) CODE
D CABLE SUPPORT SYSTEMS (CONT'D)
Metal conduit (Cont'd)
Galvanised steel conduit fixed to wall or ceilingcomplete with spacer bar saddles (Cont'd):
216 Circular through box with cover for 20mm diameter. no $2.70 SZ937
217 Circular T-junction box with cover for 20mm diameter. no $2.70 SZ944
PVC conduit
High impact PVC conduit fixed to wall or ceilingcomplete with spacer bar saddles:
218 20mm diameter. m $4.60 SZ102
219 25mm diameter. m $5.10 SZ103
220 32mm diameter. m $6.90 SZ104
221 20mm diameter inspection tee. no $2.80 SZ105
222 25mm diameter ditto. no $3.50 SZ106
223 32mm diameter inspection tee. no $6.40 SZ107
224 Circular junction box with lid for 20mm diameter. no $3.60 SZ108
225 Ditto for 25mm diameter. no $3.70 SZ109
Flexible PVC conduit fixed to wall or ceiling completewith spacer bar saddles or suspension brackets, etc:
226 20mm diameter. m $4.10 SZ497
227 25mm diameter. m $4.20 SZ498
PVC concealed pipe conduit
PVC pipe conduit cast/embedded in slab/wall completewith tees, connectors and other accessories:
228 20mm diameter. m $2.70 SZ925
229 25mm diameter. m $3.20 SZ926
230 32mm diameter. m $4.50 SZ927
Page 21 of 69
HOUSING AND DEVELOPMENT BOARDSTANDARD SCHEDULE OF RATES FOR ELECTRICAL WORKS (JUL 2013)
S/N DESCRIPTION UNIT RATE($) CODE
D CABLE SUPPORT SYSTEMS (CONT'D)
Metal trunking
Electro-galvanised/phosphate-dipped steel trunkingwith epoxy powder paint fixed to wall or ceilingcomplete with standard joint accessories and cover:
231 50mm x 50mm. m $12.50 SZ110
232 75mm x 75mm. m $14.80 SZ936
233 100mm x 50mm. m $15.00 SZ111
234 150mm x 50mm. m $18.00 SZ112
235 150mm x 75mm. m $19.10 SZ962
236 200mm x 50mm. m $21.70 SZ113
237 200mm x 100mm. m $24.30 SZ948
238 250mm x 50mm. m $24.40 SZ114
239 300mm x 50mm. m $27.50 SZ115
240 300mm x 75mm. m $29.00 SZ685
Cable tray
Hot-dipped galvanised hot rolled perforated mild steelcable trays fixed to wall or ceiling complete withhangers and fixing accessories:
241 100mm width. m $21.80 SZ116
242 150mm width. m $23.60 SZ117
243 225mm width. m $30.30 SZ118
244 300mm width. m $40.50 SZ119
245 450mm width. m $61.50 SZ120
246 600mm width. m $78.20 SZ121
Page 22 of 69
HOUSING AND DEVELOPMENT BOARDSTANDARD SCHEDULE OF RATES FOR ELECTRICAL WORKS (JUL 2013)
S/N DESCRIPTION UNIT RATE($) CODE
E ELECTRICAL ACCESSORIES
Consumer control unit
Insulated consumer control unit complete with 63A DPisolator switch, 40A RCCB, DP 20KA DIN rail mountedplug-in surge protector and:
247 6x6A-20A 6KA MCB. no $217.30 Z0225
248 12x6A-30A 6KA MCB. no $252.50 Z0226
249 Insulated consumer control unit complete with 63A DPisolator switch, DP 20KA DIN rail mounted plug-in surgeprotector and 6x6A-20A 6KA MCB.
no $181.10 Z0227
250 Insulated consumer control unit complete with 40A/63ADP M6 MCB with contact position indicator, 40A/63ARCCB, DP 20KA DIN rail mounted plug-in surge protectorand 8x5A-32A 6KA MCB.
no $278.30 Z0228
Split load insulated consumer control unit completewith 40A/63A DP M6 MCB with contact positionindicator, 63A DP isolator, 40A/63A RCCB, DP 20KADIN rail mounted plug-in surge protector and:
251 9x6A-32A 6KA MCB. no $283.00 Z0229
252 10x6A-32A 6KA MCB. no $287.70 Z0230
253 12x6A-32A 6KA MCB. no $297.00 Z0231
Metal-clad consumer control unit complete with 63ADP isolator switch and 40A RCCB:
254 6x6A-20A 6KA MCB. no $188.00 SZ128
255 12x6A-30A 6KA MCB. no $284.60 SZ131
256 Metal-clad consumer control unit complete with 63A DPisolator switch and 6x6A-20A 6KA MCB.
no $167.30 SZ134
257 Split load metal-clad consumer control unit complete with63A DP isolator switch, 40A RCCB and 6x5A-20A 6KAMCB.
no $199.30 SZ136
Page 23 of 69
HOUSING AND DEVELOPMENT BOARDSTANDARD SCHEDULE OF RATES FOR ELECTRICAL WORKS (JUL 2013)
S/N DESCRIPTION UNIT RATE($) CODE
E ELECTRICAL ACCESSORIES (CONT'D)
30mA trip RCCB complete with mounting box:
258 40A DP. no $110.80 SZ138
259 63A DP. no $138.30 SZ139
260 40A 4P. no $123.10 SZ503
261 63A 4P. no $167.90 SZ504
Switch fuse
Metal clad switch fuse complete with HRC fuse:
262 20A DP. no $85.00 SZ141
263 32A DP. no $113.80 SZ142
264 63A DP. no $250.80 SZ143
265 100A DP. no $370.20 SZ144
266 20A TPN. no $85.00 SZ145
267 32A TPN. no $113.80 SZ146
268 63A TPN. no $211.50 SZ147
269 100A TPN. no $370.20 SZ148
Miniature Circuit Breakers:
270 5A-20A SP 6KA. no $17.40 SZ140
271 40A DP M6. no $39.00 SZ466
272 63A DP M6. no $31.00 SZ324
Page 24 of 69
HOUSING AND DEVELOPMENT BOARDSTANDARD SCHEDULE OF RATES FOR ELECTRICAL WORKS (JUL 2013)
S/N DESCRIPTION UNIT RATE($) CODE
E ELECTRICAL ACCESSORIES (CONT'D)
Isolator switch
Metal clad isolator switch:
273 10A TPN. no $106.50 SZ282
274 32A TPN. no $121.50 SZ151
275 63A TPN. no $143.60 SZ152
276 100A TPN. no $303.30 SZ153
277 200A TPN. no $596.00 SZ967
Weatherproof PVC isolator switch:
278 10A TPN. no $39.70 SZ505
279 20A TPN. no $44.90 SZ953
280 32A TPN. no $54.90 SZ509
281 63A TPN. no $70.70 Z0184
282 100A TPN. no $420.30 Z0185
Switchgears
283 Electrical meter box size approximately 530 x 300 x180mm complete with all necessary ironmongery (otheraccessories measured separately).
no $308.70 SZ158
284 Lighting distribution board complete with 4x20A HRCfuse, 6KA 20A/30A MCB, contactor, time switch, bypassswitch.
no $1,122.10 SZ159
Moulded case circuit breaker (MCCB):
285 25KA 415V TP 15A-100A. no $181.20 SZ161
286 25KA 415V TP 125A-225A. no $342.60 SZ162
287 36KA 415V TP 125A-225A. no $388.80 SZ163
288 36KA 415V TP 250A-400A. no $552.60 SZ164
289 50KA 415V TP 450A-600A. no $1,186.70 SZ512
290 50KA 415V TP 700A-800A. no $1,493.20 SZ513
Page 25 of 69
HOUSING AND DEVELOPMENT BOARDSTANDARD SCHEDULE OF RATES FOR ELECTRICAL WORKS (JUL 2013)
S/N DESCRIPTION UNIT RATE($) CODE
E ELECTRICAL ACCESSORIES (CONT'D)
Switchboard's accessories
Contactor:
291 30A DP. no $73.90 SZ165
292 60A DP. no $216.80 SZ166
293 30A 4P. no $130.00 SZ167
294 60A 4P. no $281.80 SZ168
295 Ripple control receiver. no $402.70 Z0187
296 Time switch of programmable logic relay module completewith RS323C interface, built in timer and at least fouroutput points.
no $151.60 Z0242
297 Metal enclosure box overall size approximately200x320x130mm to house ripple control receiver.
no $41.30 SZ318
Main switchboard's accessories or instruments
298 Ammeter - current transformer operated (0 - 1600A). no $42.70 SZ262
299 Voltmeter - rotary wafer type (0 - 500V). no $45.00 SZ263
300 Ammeter or Voltmeter selector switch. no $22.00 SZ264
301 Maximum demand Ammeter. no $169.20 SZ265
302 Indicating light complete with built-in transformer. no $21.00 SZ266
303 Earth Fault Relay with built-in timer. no $173.80 SZ267
304 Hour Run Meter. no $100.20 SZ281
305 Earth Leakage Relay with built-in timer no $197.60 Z0186
306 Over-current Relay with built-in timer. no $298.00 SZ268
307 Over-current Relay of IDMTL (Inverse Definite MinimumTime Lag) with 3/10 characteristics.
no $1,893.80 SZ325
308 Digital Protection Relay for IDMTL and earth faultprotection, complete with measuring capability for ampere,voltage, maximum demand, frequency, etc. and remotemonitoring features.
no $2,888.60 Z0232
Page 26 of 69
HOUSING AND DEVELOPMENT BOARDSTANDARD SCHEDULE OF RATES FOR ELECTRICAL WORKS (JUL 2013)
S/N DESCRIPTION UNIT RATE($) CODE
E ELECTRICAL ACCESSORIES (CONT'D)
Protective Transformer:
309 CT ratio 100/5 (5P10, 20VA). no $238.20 SZ514
310 CT ratio 200/5 (5P10, 20VA). no $133.30 SZ269
311 CT ratio 300/5 (5P10, 20VA). no $119.40 SZ270
312 CT ratio 400/5 (5P10, 20VA). no $105.50 SZ271
313 CT ratio 600/5 (5P10, 20VA). no $86.20 SZ272
314 CT ratio 1200/5 (5P10, 20VA). no $103.20 SZ273
315 CT ratio 1600/5 (5P10, 20VA). no $100.80 SZ274
Metering Current Transformer:
316 CT ratio 100/5 (Class 15VA). no $42.20 SZ515
317 CT ratio 200/5 (Class 15VA). no $27.10 SZ275
318 CT ratio 300/5 (Class 15VA). no $50.50 SZ276
319 CT ratio 400/5 (Class 15VA). no $51.70 SZ277
320 CT ratio 600/5 (Class 15VA). no $64.30 SZ278
321 CT ratio 1200/5 (Class 15VA). no $73.50 SZ279
322 CT ratio 1600/5 (Class 15VA). no $74.40 SZ280
Connectors
BI Connector:
323 60A. no $7.20 SZ170
324 100A. no $7.20 SZ171
325 200A. no $41.70 SZ172
326 20A DP heater connection unit. no $12.50 SZ516
327 10A polarised plug and socket connector. no $4.00 SZ173
328 5A white moulded batten lamp holder. no $6.00 SZ174
329 5A white moulded ceiling rose. no $8.60 SZ175
Page 27 of 69
HOUSING AND DEVELOPMENT BOARDSTANDARD SCHEDULE OF RATES FOR ELECTRICAL WORKS (JUL 2013)
S/N DESCRIPTION UNIT RATE($) CODE
E ELECTRICAL ACCESSORIES (CONT'D)
Switches
6A White rocker plate switch complete with box forsurface mounting:
330 1-way 1-gang. no $12.10 SZ176
331 2-way 1-gang. no $13.10 SZ998
332 2-gang. no $15.00 SZ177
333 3-gang. no $19.30 SZ178
334 20A DP heater switch complete with box for surfacemounting.
no $24.40 SZ517
6A Ultra thin plate switch complete with box for flushmounting:
335 1-way 1-gang. no $17.40 SZ988
336 2-way 1-gang. no $16.10 SZ999
337 2-gang. no $24.90 SZ989
338 3-gang. no $36.80 SZ990
339 20A Ultra thin DP heater switch complete with box for flushmounting.
no $41.80 SZ992
340 White rocker plate bell push complete. no $13.90 SZ518
6A metal clad rocker switch complete with mountingbox:
341 1-way 1-gang. no $19.60 Z0218
342 2-way 1-gang no $20.80 SZ180
343 2-gang. no $23.00 SZ181
344 3-gang. no $29.00 SZ182
Page 28 of 69
HOUSING AND DEVELOPMENT BOARDSTANDARD SCHEDULE OF RATES FOR ELECTRICAL WORKS (JUL 2013)
S/N DESCRIPTION UNIT RATE($) CODE
E ELECTRICAL ACCESSORIES (CONT'D)
Switch socket outlets
Plate switch socket outlet complete with box forsurface mounting:
345 13A 1-gang. no $12.50 SZ184
346 13A 2-gang. no $18.10 SZ185
347 15A 1-gang. no $19.70 SZ188
Ultra thin switch socket outlet complete with box forflush mounting:
348 13A 1-gang. no $18.90 SZ985
349 13A 2-gang. no $28.40 SZ986
350 15A 1-gang. no $33.30 SZ987
Metal clad switch socket outlet complete withmounting box:
351 13A 1-gang. no $19.40 SZ186
352 13A 2-gang. no $28.30 SZ187
353 15A 1-gang. no $25.70 SZ189
PVC weatherproof switch socket outlet complete withscrew cap:
354 13A. no $41.30 SZ190
355 15A. no $70.10 SZ191
Metal type weatherproof switch socket outlet completewith screw cap:
356 13A. no $51.10 SZ520
357 15A. no $79.10 SZ521
358 Metal enclosure size 210x180x140mm to house switchsocket outlet complete with hinged door and cam lock.
no $18.70 SZ194
Page 29 of 69
HOUSING AND DEVELOPMENT BOARDSTANDARD SCHEDULE OF RATES FOR ELECTRICAL WORKS (JUL 2013)
S/N DESCRIPTION UNIT RATE($) CODE
F LUMINAIRES
359 Woolite WWLC 141/EB/WWT complete with T5 1x14Wlamp and high frequency electronic ballast.
no $53.70 Z1101
360 Woolite WWLC 281/EB/WWT complete with T5 1x28Wlamp and high frequency electronic ballast.
no $54.90 Z1102
361 Woolite WWLC 282/EB/WWT complete with T5 2x28Wlamp and high frequency electronic ballast.
no $66.40 Z1103
362 Hugo-F.141.FMR-T5 complete with T5 1x14W lamp, heavygauge electro-galvanised steel base, aluminium reflectorand high frequency electronic ballast.
no $70.40 Z1104
363 Davis EL114T5 complete with T5 1x14W lamp and highfrequency electronic ballast.
no $43.40 Z1105
364 Davis EL128T5 complete with T5 1x28W lamp and highfrequency electronic ballast.
no $45.70 Z1106
365 Simlite BSS 114 complete with T5 1x14W lamp, powdercoated reflector and high frequency ballast.
no $80.20 Z1107
366 Simlite BSS 214 complete with T5 2x14W lamp, powdercoated reflector and high frequency ballast.
no $91.70 Z1108
367 Similite BSS 128 complete with T5 1x28W lamp, powdercoated reflector and high frequency ballast.
no $91.70 Z1109
368 Similite SB 114 complete with T5 1x14W lamp and highfrequency ballast.
no $53.70 Z1110
369 Simlite SB 128 complete with T5 1x28W lamp and highfrequency ballast.
no $57.20 Z1111
370 Basic CL1 complete with T5 1x14W lamp, epoxy polyesterpowder coated metallic body and gear.
no $73.30 Z1112
371 Basic CL1 complete with 1x28W T5 lamp, epoxy polyesterpowder coated metallic body and gear.
no $82.50 Z1113
Page 30 of 69
HOUSING AND DEVELOPMENT BOARDSTANDARD SCHEDULE OF RATES FOR ELECTRICAL WORKS (JUL 2013)
S/N DESCRIPTION UNIT RATE($) CODE
F LUMINAIRES (CONT'D)
372 Thorn Formula 1F1XZ114R complete with T5 1x14W lamp,cold roll steel powder coated housing, aluminium reflectorand high frequency ballast.
no $99.70 Z1115
373 Aztech LF212 LED luminaire complete with 12W LEDlamp.
no $82.50 Z1116
374 Aztech LF212S LED luminaire complete with 12W LEDlamp and motion sensor.
no $114.70 Z1117
375 Aztech LF212B LED luminaire complete with 12W LEDlamp and backup battery.
no $151.50 Z1118
376 Aztech LF212BS LED luminaire complete with 12W LEDlamp, motion sensor and backup battery.
no $174.50 Z1119
377 Aztech LF424 LED luminaire complete with 24W LEDlamp.
no $157.20 Z1120
378 Aztech LF424S LED luminaire complete with 24W LEDlamp and motion sensor.
no $180.20 Z1121
379 Aztech LF424B LED luminaire complete with 24W LEDlamp and backup battery.
no $280.30 Z1122
380 Aztech LF424BS LED luminaire complete with 24W LEDlamp, motion sensor and backup battery.
no $306.70 Z1123
381 DAVIS-OPTILED-228 2 feet LED luminaire complete with9W LED lamp.
no $94.00 Z1124
382 DAVIS-OPTILED-228M 2 feet LED luminaire complete with9W LED lamp and motion sensor.
no $117.00 Z1125
383 DAVIS-OPTILED-228E 2 feet LED luminaire complete with9W LED lamp and backup battery
no $186.00 Z1126
384 DAVIS-OPTILED-228ME 2 feet LED luminaire completewith 9W LED lamp, motion sensor and backup battery
no $209.00 Z1127
G LIGHTNING CONDUCTORS AND EARTH RODS
385 Aluminium 25mm x 3mm tape with aluminium clip andbase properly secured onto wall or roof for lightningconductors.
m $5.20 SZ205
386 Copper 25mm x 3mm tape with brass/bronze clip andbase properly secured onto wall or roof for lightningconductors.
m $17.00 SZ207
Page 31 of 69
HOUSING AND DEVELOPMENT BOARDSTANDARD SCHEDULE OF RATES FOR ELECTRICAL WORKS (JUL 2013)
S/N DESCRIPTION UNIT RATE($) CODE
G LIGHTNING CONDUCTORS AND EARTH RODS (CONT'D)
387 50mm² stranded bare copper conductors withbrass/bronze clip and base properly secured onto wall orroof for lightning conductors.
m $15.00 SZ208
388 70mm² stranded bare copper conductors withbrass/bronze clip and base properly secured onto wall orroof for lightning conductors.
m $16.90 SZ209
389 Air terminal 16mm diameter 300mm length aluminiumcomplete with cast aluminium alloy base.
no $20.40 SZ210
390 Air terminal 16mm diameter 300mm length coppercomplete with leaded gunmetal base.
no $29.30 SZ211
391 Bi-metallic aluminium-copper connector for 25mm x 3mmtape.
no $21.50 SZ212
392 Aluminium square tape clamp suitable for 25 x 3mm tape. no $12.40 SZ213
393 Copper square tape clamp suitable for 25 x 3mm tape. no $14.60 SZ968
394 Leaded gunmetal square tape clamp suitable for 25mm x3mm tape.
no $17.80 SZ214
395 Leaded gunmetal round test clamp. no $27.40 SZ215
396 Leaded gunmetal 'B' bond for bonding copper tape tosteel surface.
no $14.80 SZ216
397 Aluminium 'B' bond for bonding aluminium tape to steelsurface.
no $13.40 SZ217
398 Exothermic welded joint. no $31.90 SZ218
399 Earth rod 16mm diameter 1.8m long copper-weld, mildsteel rod driven in ground.
no $37.30 SZ221
400 Interconnecting buried 25mm x 3mm copper tape. m $13.40 SZ222
401 Leaded gunmetal/naval brass earth rod clamp. no $17.10 SZ223
402 Aluminium/silicon/phosphor bronze earth rod coupling. no $7.00 SZ224
403 Clamp for earthing and bonding to pipe diameter 12mm -75mm.
no $2.80 SZ225
404 250mm x 250mm x 3mm thick hot-dipped hinged-lidinspection pit complete with plastic moulded pot.
no $25.60 SZ226
Page 32 of 69
HOUSING AND DEVELOPMENT BOARDSTANDARD SCHEDULE OF RATES FOR ELECTRICAL WORKS (JUL 2013)
S/N DESCRIPTION UNIT RATE($) CODE
H EXTERNAL LIGHTING
Lighting Columns
Hot dipped galvanised planted type lighting columnincluding excavation of pit, concrete footing, bitumencoating of planted section, painting of identificationnumbers, cutout complete with 5A-20A HRC fuse,connecting accessories, (but excluding cable glands)and backfilling and reinstatement of ground surfacesas detailed in the drawings:
405 8m lighting column with single arm bracket. no $738.80 SZ227
406 10m lighting column with double arm bracket. no $842.40 Z0165
407 3m post top lighting column. no $376.30 SZ230
408 3.5m post top lighting column. no $402.40 SZ932
409 4m post top lighting column. no $425.40 SZ462
410 4.5m post top lighting column. no $448.40 Z0164
411 5m post top lighting column. no $473.70 SZ463
412 6m post top lighting column. no $601.90 SZ907
413 8m post top lighting column. no $758.30 SZ231
414 10m post top lighting column. no $945.80 SZ232
Hot dipped galvanised flanged mounted type lightingcolumn including painting of identification numbers,cutout complete with 5A-20A HRC fuse and connectingaccessories (but excluding cable glands) as detailed inthe drawings :
415 3m post top lighting column. no $404.20 Z0166
416 3.5m post top lighting column. no $421.50 Z0167
417 4m post top lighting column. no $456.00 Z0168
418 4.5m post top lighting column. no $481.10 Z0169
419 5m post top lighting column. no $499.80 Z0170
Page 33 of 69
HOUSING AND DEVELOPMENT BOARDSTANDARD SCHEDULE OF RATES FOR ELECTRICAL WORKS (JUL 2013)
S/N DESCRIPTION UNIT RATE($) CODE
H EXTERNAL LIGHTING (CONT'D)
Accessories for lighting columns
420 Pole cap. no $58.30 Z0171
421 Banner bracket. no $75.50 Z0172
422 Centre ring 90mm diameter (OD). no $46.80 Z0173
423 Shoulder cover (Type 1) 76mm / 140mm diameter. no $115.80 Z0174
424 Shoulder cover (Type 1A) 100mm / 140mm diameter. no $121.50 Z0175
425 Shoulder cover (Type 2) 76mm / 140mm diameter. no $92.80 Z0176
426 Shoulder cover (Type 2A) 100mm / 140mm diameter. no $98.50 Z0177
Painting of lighting columns
One coat of lead and chromate free primer and twocoats of polyurethene paint on the external surfaceof lighting column:
427 3m-3.5m high column. no $9.90 Z0235
428 4m high column. no $11.80 Z0236
429 4.5m high column. no $13.00 Z0237
430 5m high column. no $14.30 Z0238
431 6m high column. no $19.20 Z0239
432 8m high column. no $26.60 Z0240
433 10m high column. no $33.20 Z0241
Polyester powder coating in standard RAL colour ontothe external surface of lighting column including allnecessary labour & transport.
434 3m high column. no $79.60 Z0178
435 3.5m high column. no $92.00 Z0179
436 4m high column. no $104.30 Z0180
437 4.5m high column. no $110.50 Z0181
438 5m high column. no $116.70 Z0182
Page 34 of 69
HOUSING AND DEVELOPMENT BOARDSTANDARD SCHEDULE OF RATES FOR ELECTRICAL WORKS (JUL 2013)
S/N DESCRIPTION UNIT RATE($) CODE
H EXTERNAL LIGHTING (CONT'D)
Polyester powder coating in standard RAL colour ontothe external surface of lighting column including allnecessary labour & transport.(Cont'd)
439 6m high column. no $129.00 Z0183
440 8m high column. no $134.60 Z0212
441 10m high column. no $146.90 Z0213
Service Road & Driveway Luminaire
Lighting luminaires complete with integral controlgears and other accessories:
442 3E post-top luminaire Cobra FDL-D2/VP/VB/VM/VGcomplete with clear/pearl/opal methacrylate diffuser,80W/125W mercury super deluxe lamp, separate ignitorand single arm mounting bracket.
no $1,382.90 Z0031
443 3E post-top luminaire Cobra FDL-D2-VP/VB/VM/VGcomplete with clear/pearl/opal methacrylate diffuser, 70WSON lamp, separate ignitor and single arm mountingbracket.
no $1,382.90 Z0030
444 3E post–top luminaire Harmony FDL-DD2-VM, in die castaluminium body with upperdome in aluminium material,methacrylate diffuser, part polished and anodisedaluminium reflector complete with 70W SON lamp andsingle arm bracket.
no $813.70 Z0189
445 3E post-top luminaire Hirondelle FDS-D2-VM/VB/VP/VGcomplete with clear/pearl/opal methacrylate diffuser, 70WSON lamp and separate ignitor.
no $1,388.70 Z0024
446 3E post-top luminaire Hirondelle FDS-D2-VM/VB/VP/VGcomplete with clear/pearl/opal methacrylate diffuser,80W/125W mercury super deluxe lamp, separate ignitorand single arm mounting bracket.
no $1,359.90 Z0025
447 3E post-top luminaire Libellule FDL-D2/D*-VB/VP/VM/VGcomplete with clear/pearl/opal methacrylate diffuser, 70WSON lamp, separate ignitor, and single arm mountingbracket.
no $1,497.90 Z0028
448 3E post-top luminaire Libellule FDL-D2/D*-VB/VP/VM/VGcomplete with clear/pearl/opal methacrylate diffuser,80W/125W mercury super deluxe lamp, separate ignitorand single arm mounting bracket.
no $1,469.20 Z0029
Page 35 of 69
HOUSING AND DEVELOPMENT BOARDSTANDARD SCHEDULE OF RATES FOR ELECTRICAL WORKS (JUL 2013)
S/N DESCRIPTION UNIT RATE($) CODE
H EXTERNAL LIGHTING (CONT'D)
Service Road & Driveway Luminaire (Cont'd)
Lighting luminaires complete with integral controlgears and other accessories (Cont'd):
449 3E post-top luminaire Sygma FD-D2-VB/VP/VM/VGcomplete with clear/pearl/opal methacrylate diffuser, 70WSON lamp, separate ignitor and single arm mountingbracket.
no $1,394.40 Z0026
450 3E post-top luminaire Sygma FD-D2-VB/VP/VM/VGcomplete with clear/pearl/opal methacrylate diffuser,80W/125W mercury super deluxe lamp, separate ignitorand single arm mounting bracket.
no $1,365.70 Z0027
451 A+G post-top luminaire ZOB 1060 complete withpolycarbonate diffuser and 70W SON MBFSD lamp.
no $2,067.20 Z0032
452 AEG post-top luminaire Triangel Type-A1 complete with70W SON lamp, clear safety glass diffuser.
no $1,114.40 Z0014
453 AEG post-top luminaire Triangel Type-A1 complete with80/125W MBFSD lamp, clear safety glass diffuser.
no $1,084.00 Z0015
454 ALCATEL post-top luminaire FG Cutoff/CL complete with70W SON lamp, clear polycarbonate diffuser.
no $519.90 Z0016
455 ATP post-top luminaire Alameda Vial complete with 70WSON/80W or 125W super deluxe mercury, body frame incorrosion-resistant glass reinforced polymer and clear/opalUV-stabilised polycarbonate diffuser.
no $1,112.70 Z0001
456 ATP post-top luminaire Europa Vial complete with 70WSON/80W or 125W super deluxe mercury, body frame incorrosion-resistant glass reinforced polymer and clear/opalUV-stabilised polycarbonate diffuser.
no $874.10 Z0002
457 BEGA post-top luminaire Cat No. 8141 surface washerscomplete with 70W SON lamp.
no $1,101.80 Z0045
458 D.W. WINDSOR post-top luminaire DOVER complete withdie-cast aluminium ring, illuminated top canopy, clearpolycarbonate glazing, diamond optic variable reflectorsystem and 70W SON or 125W MBFSD lamp.
no $1,285.20 Z0038
459 D.W. WINDSOR post-top luminaire HATFIELD completewith spun aluminium canopy, clear diffuser, diamond opticvariable reflector system and 1 x 70W SON or 125WMBFSD lamp.
no $1,285.20 Z0040
Page 36 of 69
HOUSING AND DEVELOPMENT BOARDSTANDARD SCHEDULE OF RATES FOR ELECTRICAL WORKS (JUL 2013)
S/N DESCRIPTION UNIT RATE($) CODE
H EXTERNAL LIGHTING (CONT'D)
Service Road & Driveway Luminaire (Cont'd)
Lighting luminaires complete with integral controlgears and other accessories (Cont'd):
460 D.W. WINDSOR post-top luminaire YORK HENLYcomplete with die-cast aluminium base, spun aluminiumcanopy, clear or reeded polycarbonate diffuser, base conereflector, diamond optic variable reflector system and 1 x70W SON or 125W MBFSD lamp.
no $1,285.20 Z0039
461 HELUX post-top luminaire Hellux 115 complete with 70Whigh pressure sodium lamp or 80W/125W mercury superdeluxe lamp and acrylic diffuser.
no $1,588.80 Z0037
462 IDMAN post-top luminaire OCULUS 70674 with high purityanodized aluminium reflector and bowl of impact-resistantacrylic resin diffuser complete with 70W SON lamp andsingle arm bracket.
no $880.40 Z0192
463 KL LICHT post-top luminaire Modul 6113 complete with70W SON/80W or 125W super deluxe mercury, bodyframe in cast aluminium and clear, frosted or opal UV-stabilised polycarbonate diffuser.
no $2,124.70 Z0003
464 RAGNI arm mounted luminaire ORIGIA 6600 of embossedaluminium dome and body of cast aluminium constructioncomplete with 1 x 70W SON lamp, anti-glare pure polishaluminium reflector, clear tempered glass diffuser anddecorative single arm bracket of HDG steel arm typeConsole Dalia or Console Cecia.
no $613.50 Z0188
Page 37 of 69
HOUSING AND DEVELOPMENT BOARDSTANDARD SCHEDULE OF RATES FOR ELECTRICAL WORKS (JUL 2013)
S/N DESCRIPTION UNIT RATE($) CODE
H EXTERNAL LIGHTING (CONT'D)
Service Road & Driveway Luminaire (Cont'd)
Lighting luminaires complete with integral controlgears and other accessories (Cont'd):
465 STERNER post-top luminaire FRANKLIN III complete withaluminium extrusion construction complete with powdercoat finish, clear lens, Type II horizontal performancereflector, straight arm and 1 x 70W SON or 125W MBFSDlamp.
no $1,147.20 Z0041
466 STERNER post-top luminaire MANCHESTER completewith aluminium extrusion construction complete withpowder coat finish, clear lens, IES Type II performancereflector, straight arm and 1 x 70W SON or 125W MBFSDlamp.
no $1,325.40 Z0042
467 STERNER post-top luminaire MARQUETTE complete withaluminium extrusion construction complete with powdercoat finish, clear lens, IES Type II performance reflector,straight arm and 1 x 70W SON or 125W MBFSD lamp.
no $1,325.40 Z0043
468 WE-EF area light luminaire SBL440-E-50/70/NI(K)complete with corrosion resistant aluminium alloy body,thermal shock resistant safety glass in a hinged aluminiumframe and stainless steel fasteners, anodized high puritychemically brightened aluminium reflector and Electronic65W lamp/60W GE lamp and KS1.76 adapter and finish inRAL polyester powder coat.
no $636.00 Z0012
469 WE-EF area light luminaire SBL440-E9-80/125(K)complete with corrosion resistant aluminium alloy body,thermal shock resistant safety glass in a hinged aluminiumframe and stainless steel fasteners, anodized high puritychemically brightened aluminium reflector and Electronic65W lamp/60W GE lamp and KS1.76 adapter and finish inRAL polyester powder coat.
no $624.60 Z0013
Page 38 of 69
HOUSING AND DEVELOPMENT BOARDSTANDARD SCHEDULE OF RATES FOR ELECTRICAL WORKS (JUL 2013)
S/N DESCRIPTION UNIT RATE($) CODE
H EXTERNAL LIGHTING (CONT'D)
Service Road & Driveway Luminaire (Cont'd)
Lighting luminaires complete with integral controlgears and other accessories (Cont'd):
470 WE-EF post-top luminaire BSP504-E-50/70/NI(K) completewith corrosion resistant die-cast aluminium alloy body andcanopy, UV stablized and vandal resistant polycarbonatediffuser, anodized high purity aluminium reflector andElectronic 65W lamp/60W GE lamp and BA1/420.76bracket and finish in RAL polyester powder coat.
no $1,464.50 Z0008
471 WE-EF post-top luminaire BSP504-E-80/125(K) completewith corrosion resistant aluminium alloy body and canopy,UV stablized and vandal resistant polycarbonate diffuser,anodized high purity aluminium reflector and Electronic65W lamp/60W GE lamp and BA1/420.76 bracket andfinish in RAL polyester powder coat.
no $1,459.40 Z0009
472 WE-EF post-top luminaire BSP704-E-50/70/NI(K) completewith corrosion resistant aluminium alloy body and canopy,UV stablized and vandal resistant polycarbonate diffuser,anodized high purity aluminium reflector and Electronic65W lamp/60W GE lamp and BA1/580.76 bracket andfinish in RAL polyester powder coat.
no $1,980.00 Z0010
473 WE-EF post-top luminaire BSP704-E-80/125(K) completewith corrosion resistant aluminium alloy body and canopy,UV stablized and vandal resistant polycarbonate diffuser,anodized high purity aluminium reflector and Electronic65W lamp/60W GE lamp and BA1/580.76 bracket andfinish in RAL polyester powder coat.
no $1,969.10 Z0011
474 WE-EF post-top luminaire CA504-E-50/70/NI(K) completewith corrosion resistant aluminium alloy body,polycarbonate diffuser and vandal resistant, anodized highpurity aluminium reflector, chemically brightened, completewith Electronic 65W lamp/60W GE lamp and KC1.76adapter and finish in RAL polyester powder coat.
no $1,256.40 Z0007
Page 39 of 69
HOUSING AND DEVELOPMENT BOARDSTANDARD SCHEDULE OF RATES FOR ELECTRICAL WORKS (JUL 2013)
S/N DESCRIPTION UNIT RATE($) CODE
H EXTERNAL LIGHTING (CONT'D)
Service Road & Driveway Luminaire (Cont'd)
Lighting luminaires complete with integral controlgears and other accessories (Cont'd):
475 WE-EF post-top luminaire CA504-E-80/125(K) completewith corrosion resistant aluminium alloy body,polycarbonate diffuser and vandal resistant, anodized highpurity aluminium reflector, chemically brightened, completewith Electronic 65W lamp/60W GE lamp and KC1.76adapter and finish in RAL polyester powder coat.
no $1,233.40 Z0006
476 3E decorative post-top luminaire DELTA complete with 1 x70W SON lamp, die-cast aluminium body with flattoughened glass diffuser and asymmetrical aluminiumreflector with DELTA single arm mounting bracket(1200mm projection).
no $729.20 Z1004
477 LIGMAN 96033 post-mounted luminaire complete with 1 x70W SON lamp, high corrosion resistant aluminium alloybody with matt black powder coating, clear toughen glassdiffuser, asymmetrical anodised high purity aluminiumreflector, bracket and mounting accessories.
no $894.20 Z1005
478 EYE H5908 decorative semi-hemisphere streetlight widedistribution post-mounted luminaire complete with 1 x 70WSON lamp, die-cast aluminium baked acrylic paint finishbody, heat tempered glass diffuser, asymmetricalaluminium reflector, HEA-15 bracket and mountingaccessories.
no $813.70 Z1027
479 MEYERLUX 2304 decorative post-top luminaire completewith 1 x 70W ceramic metal halide lamp, die-castaluminium body with black powder coating paint, cleartempered glass diffuser, asymmetrical light distributionspecular anodised aluminium reflector, bracket andmounting accessories.
no $724.00 Z1030
Page 40 of 69
HOUSING AND DEVELOPMENT BOARDSTANDARD SCHEDULE OF RATES FOR ELECTRICAL WORKS (JUL 2013)
S/N DESCRIPTION UNIT RATE($) CODE
H EXTERNAL LIGHTING (CONT'D)
Service Road & Driveway Luminaire (Cont'd)
Lighting luminaires complete with integral controlgears and other accessories (Cont'd):
480 DW WINDSOR decorative post-top luminaire AKORDCONE complete with 1 x 70W SON lamp, die-castaluminium body with flat toughened glass diffuser, diamondoptic reflector with DA or CA or SB single arm mountingbracket.
no $894.20 Z1035
481 LIGMAN 97031 MARS streetlighting luminaire completewith 1 x 70W SON lamp, die-cast aluminium alloy body,tempered glass diffuser, asymmetrical aluminium reflector,pole spigot, bracket and mounting accessories.
no $723.50 Z1044
482 PRISMA OLA decorative post-top luminaire complete with1 x 70W SON lamp, die-cast non corroding aluminiumbody with powder coating finish, tempered glass diffuser,anodised aluminium reflector and mounting bracket (for60mm or 90 mm pole).
no $802.20 Z1047
483 Philips Street Lantern SPP202/070 post-top luminairecomplete with 1 x 70W SON lamp, die-cast aluminiumhousing, high purity anodized aluminium facetted reflector,curved tempered glass diffuser, bracket and mountingaccessories.
no $307.70 Z1052
484 GGE 858-DG0302 post-mounted luminaire complete with 1x 70W SON lamp, die-cast aluminium body, cleartempered glass diffuser, asymmetrical anodised aluminiumreflector, bracket and mounting accessories.
no $698.70 Z1058
485 THORN CIVIC 1, CIVFGP70.4 post-top luminaire completewith 1 x 70W SON lamp, die-cast aluminium body, flattoughened glass diffuser and asymmetrical aluminiumreflector.
no $336.40 Z1062
Page 41 of 69
HOUSING AND DEVELOPMENT BOARDSTANDARD SCHEDULE OF RATES FOR ELECTRICAL WORKS (JUL 2013)
S/N DESCRIPTION UNIT RATE($) CODE
H EXTERNAL LIGHTING (CONT'D)
Landscape & Playground Lighting Luminaire
Lighting luminaires complete with integral controlgears and other accessories:
486 AAL SL VT LARGENT post-top luminaire of one piece castaluminium construction for the body complete with frosteddiffuser, powder coat finish, performance reflector forcontrolled driveway or landscape lighting and 65W energylamp.
no $997.70 Z0088
487 BEGA post-top luminaire 8081 complete with symmetricallight distribution 80W/125W MBFSD lamp.
no $1,339.60 Z0065
488 BEGA post-top luminaire 8180 complete with symmetricallight distribution 70W SON lamp.
no $1,424.30 Z0066
489 CLING CASTALDI post-top luminaire Cat No. Veneziacomplete with 125W mercury super deluxe lamp, anti UVunbreakable opal top polycarbonate diffuser and clearbottom UV-stabilised polycarbonate diffuser, downwardsemission in symmetrical reflector.
no $1,240.90 Z0197
490 D.W. WINDSOR post-top luminaire YORK BRAMARcomplete with die-cast aluminium base, spun aluminiumcanopy, clear or reeded polycarbonate diffuser, base conereflector, diamond optic variable reflector system and 70WSON/125W MBFSD lamp.
no $1,285.20 Z0081
491 D.W. WINDSOR post-top luminaire YORK NEWPORTcomplete with die-cast aluminium base, spun aluminiumcanopy, clear or reeded polycarbonate diffuser, base conereflector, diamond optic variable reflector system and 70WSON/125W MBFSD lamp.
no $1,285.20 Z0080
492 D.W. WINDSOR post-top luminaire YORK WATERFORDcomplete with die-cast aluminium base, spun aluminiumcanopy, clear or reeded polycarbonate diffuser, base conereflector, diamond optic variable reflector system and 70WSON/125W MBFSD lamp.
no $1,285.20 Z0082
493 ELTE post-top luminaire Chinese Hat I 6710 complete with70W SON/80W or 125W super deluxe mercury, fixture incorrosion free aluminium with inner optical louvred reflectorbuilt in cyclindrical clear, frosted or opal UV-stabilizedpolycarbonate diffuser.
no $1,972.90 Z0048
494 ELTE post-top luminaire Chinese Hat I 6711 complete with70W SON/80W or 125W super deluxe mercury, fixture incorrosion free aluminium with lamellas arranged outsidecyclindrical clear, frosted or opal UV-stabilizedpolycarbonate diffuser.
no $2,147.70 Z0049
Page 42 of 69
HOUSING AND DEVELOPMENT BOARDSTANDARD SCHEDULE OF RATES FOR ELECTRICAL WORKS (JUL 2013)
S/N DESCRIPTION UNIT RATE($) CODE
H EXTERNAL LIGHTING (CONT'D)
Landscape & Playground Lighting Luminaire (Cont'd)
Lighting luminaires complete with integral controlgears and other accessories (Cont'd):
495 EWO post-top luminaire UL00-000-M with clear/sandblasted PMMA diffuser complete with 70W SON/125Wmercury super deluxe lamp.
no $1,032.20 Z0199
496 HELLUX post-top luminaire Hellux 034 complete with 70Whigh pressure sodium lamp or 80W/125W mercury superdeluxe lamp and acrylic diffuser.
no $1,221.90 Z0072
497 HELLUX post-top luminaire Hellux 035 complete with 70Whigh pressure sodium lamp or 80W/125W mercury superdeluxe lamp and acrylic diffuser.
no $1,266.20 Z0073
498 HELLUX post-top luminaire Hellux 401-4 complete with70W high pressure sodium lamp or 80W/125W mercurysuper deluxe lamp and acrylic diffuser.
no $880.40 Z0074
499 HOFFMEISTER post-top luminaire Baskette cat no1.2273.1.49.721 of cast aluminium housing, silver anodizedaluminium lamellar reflector and clear acrylic diffusercomplete with 1 x 125W mercury super deluxe lamp .
no $2,105.10 Z0057
500 HOFFMEISTER post-top luminaire Baskette cat no1.2273.3.57.721 of cast aluminium housing, silver anodizedaluminium lamellar reflector and clear acrylic diffusercomplete with 1 x 70W SON lamp.
no $2,222.40 Z0058
501 HOFFMEISTER post-top luminaire Baskette cat no122735557721 of cast aluminium housing, silver anodizedaluminium louvred reflector and clear acrylic diffusercomplete with 1 x 70W SON lamp.
no $1,940.70 Z0059
Page 43 of 69
HOUSING AND DEVELOPMENT BOARDSTANDARD SCHEDULE OF RATES FOR ELECTRICAL WORKS (JUL 2013)
S/N DESCRIPTION UNIT RATE($) CODE
H EXTERNAL LIGHTING (CONT'D)
Landscape & Playground Lighting Luminaire (Cont'd)
Lighting luminaires complete with integral controlgears and other accessories (Cont'd):
502 HOFFMEISTER post-top luminaire Baskette cat no1.2280.1.49.721 of cast aluminium housing, silver anodizedaluminium reflector and clear acrylic diffuser complete with1 x 125W mercury super deluxe lamp.
no $1,679.60 Z0055
503 HOFFMEISTER post-top luminaire Baskette cat no1.2280.3.57.721 of cast aluminium housing, silver anodizedaluminium reflector and clear acrylic diffuser complete with1 x 70W SON lamp.
no $1,775.10 Z0056
504 IEP decorative post top lantern RANGE F05 of body, frameand top cover plate in cast aluminium complete with opalor clear methacrylate diffuser and 65W energy lamp.
no $485.90 Z0195
505 KL LICHT post-top luminaire Modul 6110 complete with70W SON/80W or 125W super deluxe mercury, body incast aluminium and clear, frosted or opal UV-stabilizedpolycarbonate diffuser.
no $1,630.20 Z0050
506 KL LICHT post-top luminaire Trapez 5017 complete with70W SON/80W or 125W super deluxe mercury, body incast aluminium and frosted UV-stabilized polycarbonatediffuser.
no $1,271.40 Z0051
507 KL LICHT post-top luminaire Trapez 5082 complete with70W SON/80W or 125W super deluxe mercury, body incast aluminium and frosted UV-stabilized polycarbonatediffuser.
no $1,842.90 Z0052
508 KL LICHT post-top luminaire Zylinder-Quadro 1716.125complete with 70W SON/80W or 125W super deluxemercury, body and top cover in cast aluminium andcylindrical opal UV-stabilized polycarbonate diffuser.
no $2,067.20 Z0053
Page 44 of 69
HOUSING AND DEVELOPMENT BOARDSTANDARD SCHEDULE OF RATES FOR ELECTRICAL WORKS (JUL 2013)
S/N DESCRIPTION UNIT RATE($) CODE
H EXTERNAL LIGHTING (CONT'D)
Landscape & Playground Lighting Luminaire (Cont'd)
Lighting luminaires complete with integral controlgears and other accessories (Cont'd):
509 KL LICHT post-top luminaire Zylinder-Quadro 1718.125complete with 70W SON/80W or 125W super deluxemercury, body and top cover in cast aluminium and anti-glare louvres built in cylindrical clear UV-stabilizedpolycarbonate diffuser.
no $2,147.70 Z0054
510 LOUIS POULSEN post-top luminaire KIPP 5747 298 811complete with 125W mercury super deluxe lamp.
no $1,641.70 Z0084
511 LOUIS POULSEN post-top luminaire KIPP 5747 298 811complete with 70W high pressure sodium lamp.
no $1,515.20 Z0085
512 LOUIS POULSEN post-top luminaire KIPP 5747 298 811complete with 80W mercury super deluxe lamp.
no $1,515.20 Z0083
513 ROGER PRADIER post-top luminaire PV4 complete withbody of aluminium with special treatment against corrosion,opal or smoked makrolon diffuser and 125W MBFSD lamp.
no $1,066.70 Z0086
514 ROGER PRADIER post-top luminaire PV4 complete withbody of aluminium with special treatment against corrosion,opal or smoked makrolon diffuser and 70W SON lamp.
no $1,124.20 Z0087
Page 45 of 69
HOUSING AND DEVELOPMENT BOARDSTANDARD SCHEDULE OF RATES FOR ELECTRICAL WORKS (JUL 2013)
S/N DESCRIPTION UNIT RATE($) CODE
H EXTERNAL LIGHTING (CONT'D)
Landscape & Playground Lighting Luminaire (Cont'd)
Lighting luminaires complete with integral controlgears and other accessories (Cont'd):
515 SIEMENS post-top luminaire Citylight Classic completewith sturdy glass enclosures, cast iron post-top sectioncover by an elegant plastic flange shape collar 70WSON/125W MBFSD lamp.
no $1,441.60 Z0063
516 SIEMENS post-top luminaire Citylight Elegance completewith sturdy glass enclosures, cast iron post-top sectioncover by an elegant plastic flange shape collar completewith 70W SON/125W MBFSD lamp.
no $1,466.90 Z0064
517 SIEMENS post-top luminaire Citylight Plus cat no 5NA-5262-1C of die-cast cast aluminium housing, pagodaspecular reflector system and acrylic diffuser complete with1 x 125 mercury super deluxe lamp.
no $1,004.60 Z0061
518 SIEMENS post-top luminaire Citylight Plus cat no 5NA-5262-1M of die-cast cast aluminium housing, pagodaspecular reflector system and acrylic diffuser complete with1 x 70W SON lamp.
no $1,039.10 Z0062
519 no $1,604.90 Z0069WE-EF post-top luminaire 01.ALY359-DT-18(I) completewith corrosion resistant aluminium alloy body, bracket andpost, polycarbonate UV stabilized and vandal resistantdiffuser and Electronic 20W lamp and finish in RALpolyester powder coat including 2.5m galvanised post toplighting column.
Page 46 of 69
HOUSING AND DEVELOPMENT BOARDSTANDARD SCHEDULE OF RATES FOR ELECTRICAL WORKS (JUL 2013)
S/N DESCRIPTION UNIT RATE($) CODE
H EXTERNAL LIGHTING (CONT'D)
Landscape & Playground Lighting Luminaire (Cont'd)
Lighting luminaires complete with integral controlgears and other accessories (Cont'd):
520 no $1,616.40 Z0070
521 WE-EF post-top luminaire ZA640-E-50/70/N(K) completewith corrosion resistant die-cast aluminium alloy body andcanopy, UV stabilized and vandal resistant polycarbonatediffuser and anodized high purity aluminium reflector andElectronic 65W lamp finished in RAL polyester powdercoat.
no $1,448.50 Z0067
522 WE-EF post-top luminaire ZA640-E-80/125W(K) completewith corrosion resistant die-cast aluminium alloy body andcanopy, UV stabilized and vandal resistant polycarbonatediffuser and anodized high purity aluminium reflector andElectronic 65W lamp finished in RAL polyester powdercoat.
no $1,438.10 Z0068
523 ROGER PRADIER PV4 antique lantern complete with 1 x125W mercury super deluxe lamp, die-cast corrosionresistant aluminium with powder coating body, translucentPMMA bowl diffuser, and aluminium reflector.
no $1,032.20 Z1006
524 ROGER PRADIER PV4 antique lantern complete with 1 x70W SON lamp, die-cast corrosion resistant aluminiumwith powder coating body, translucent PMMA bowl diffuser,and aluminium reflector.
no $1,043.70 Z1007
525 SIMLITE INOVA GE609D post-top luminaire complete with1 x 70W SON lamp or 125W mercury super deluxe lamp,die-cast aluminium alloy with powder coating bodycomponents, translucent PMMA diffuser and anti-glaresymmetric louver in aluminium reflector.
no $802.20 Z1032
WE-EF post-top luminaire 01.ALY359-DT-26(I) completewith corrosion resistant aluminium alloy body, bracket andpost, polycarbonate UV stabilized and vandal resistantdiffuser and Electronic 20W lamp and finish in RALpolyester powder coat including 2.5m galvanised post toplighting column.
Page 47 of 69
HOUSING AND DEVELOPMENT BOARDSTANDARD SCHEDULE OF RATES FOR ELECTRICAL WORKS (JUL 2013)
S/N DESCRIPTION UNIT RATE($) CODE
H EXTERNAL LIGHTING (CONT'D)
Landscape & Playground Lighting Luminaire (Cont'd)
Lighting luminaires complete with integral control gear, stainless steel screws and other accessories:
526 DW WINDSOR CRADLE 450 post-top luminaire completewith 1 x 70W SON lamp or 125W mercury super deluxelamp, die-cast aluminium with powder coating body, UVstabilised acrylic glazing, aluminium diamond optic reflectorand post-top mounting bracket.
no $802.20 Z1036
527 UNILAMP OD-7201 decorative post-top luminaire completewith 1 x 70W SON lamp or 125W mercury super deluxelamp, die-cast aluminium alloy with powder coating bodycomponents, vandal proof UV stabilized polycarbonatediffuser and anodized pure aluminium louvre reflector.
no $524.20 Z1045
528 AEC EVOLUTA decorative post-top luminaire (comply toUNI 10819 to limit upward lighting emission) complete with1 x 70W SON lamp or 125W mercury super deluxe lamp,die-cast aluminium (UNI 5076 conformity) with powdercoating body components, PMMA methacrylate diffuserand anodized pure aluminium louvre reflector.
no $474.40 Z1048
529 SITECO 5NA 5242-1CR28 post-top luminaire completewith 1 x 80W / 125W mercury super deluxe lamp, die-castaluminium with powder coating body components, clear UVstabilised PMMA methacrylate diffuser, and aluminiumsymmetrical or asymmetrical reflector.
no $618.20 Z1056
530 HELLUX QMB 417 post-top luminaire complete with 1 x70W SON lamp or 125W mercury super deluxe lamp, die-cast aluminium with powder coating body components, UVstabilised polycarbonate diffuser and ring louvre.
no $856.20 Z1057
531 THORN AVENUE F post-top luminaire complete with 1 x70W SON lamp or 125W mercury super deluxe lamp,aluminium powder coated anthracite textured body, opal orclear (with sandblasted frosted ring) UV stabilisedpolycarbonate diffuser, and aluminium symmetrical orasymmetrical reflector.
no $681.40 Z1063
532 LEO LO-L6209 floodlight complete with 1 x 250W / 400Wmetal halid lamp, specially designed reflector with deep-seated lamp, chemically treated aluminium alloy housingand finish with matt black powder coating, anodised highpurity aluminium reflector, durable silicon rubber gasketand clear toughen glass on hinged frame.
no $848.20 Z1012
Page 48 of 69
HOUSING AND DEVELOPMENT BOARDSTANDARD SCHEDULE OF RATES FOR ELECTRICAL WORKS (JUL 2013)
S/N DESCRIPTION UNIT RATE($) CODE
I EXTERNAL LIGHTING (CONT'D)
Landscape & Playground Lighting Luminaire (Cont'd)
Lighting luminaires complete with integral controlgear, stainless steel screws and other accessories:
533 VINIC 50601 post-top luminaire complete with 250W metalhalide lamp, die-cast aluminium housing, asymmetricalanodised high purity aluminium reflector and 5 mm thickclear tampered glass lens. IP 54.
no $825.20 Z1013
534 GP LICHT GP-8770 post-top luminaire complete with 55Wamalgam lamp, GP-155/HPF invertor, die-cast aluminiumbody, UV stabilised and impact resistant polycarbonatediffuser, 3 lines vertical prism symmetrical distributionm,pure anodised aluminium reflector, and mountingaccessories.
no $375.20 Z1100
535 EYE GALAXY FL42/LE/MT250DL rectangular shape die-cast aluminium floodlight complete with 1 x 250W metalhalid lamp, asymmetrical hammered finish reflector,tempered glass diffuser and mounting accessories.
no $433.20 Z1028
540 IGUZZINI B426 + B450 Lavinia asymmetrical optical poletop luminaire complete with70W metal halide lamp, purealuminium reflector, PMMA diffuser, die cast aluminiumoptical assembly and frame, with dual phosphorus-chronium plating base metal and protruding single-projector pole top, attachment 102mm.
no $1,078.20 Z1130
541 IGUZZINI B413 + B450 Lavinia asymmetrical optical poletop luminaire complete with70W metal halide lamp, purealuminium reflector, PMMA diffuser, die cast aluminiumoptical assembly and frame, with dual phosphorus-chronium plating base metal and protruding single-projector pole top, attachment 102mm.
no $1,078.20 Z1131
Page 49 of 69
HOUSING AND DEVELOPMENT BOARDSTANDARD SCHEDULE OF RATES FOR ELECTRICAL WORKS (JUL 2013)
S/N DESCRIPTION UNIT RATE($) CODE
H EXTERNAL LIGHTING (CONT'D)
Landscape & Playground Lighting Luminaire (Cont'd)
Lighting luminaires complete with integral controlgear, stainless steel screws and other accessories:
542 GE EUROFLOOD floodlight complete with 1 x 250W /400W metal halid lamp, HPF-Reactor ballast, polymerthermoplastic housing, anodized and polished aluminiumreflector with asymmetrical optics and clear thermal shockresistant glass diffuser.
no $312.50 Z1029
543 DISANO Art No. 1149 floodlight complete with 1 x 250Wmetal halid lamp, die-cast aluminium housing and framewith wide cooling fins, asymmetric optics in anodisedpolished hammered 99.85% aluminium reflector, 5mm thickthermal shock and impact resistant protective temperedglass diffuser and mounting accessories.
no $450.50 Z1031
544 DISANO INDIO 1159 floodlight complete with 250W metalhalide lamp, die-cast aluminium housing and frame,asymmetric optics in anodized polished hammered 99.85%aluminium, 5 mm thick thermal shock and impact resistantprotective tempered glass diffuser and local made Tbracket. IP 65.
no $393.00 Z1055
545 TECHNOLITE Boxter 2 luminaire complete with 250W or400W metal halide lamp, steel sheet with powder coatingbody, clear tempered glass diffuser, asymmetricalaluminium reflector and mounting accessories. IP 65.
no $537.70 Z1061
Linkbuilding, Linkway Lights, Steplights, Buried Floodlights & Indoor Lights
Lighting luminaires complete with integral controlgears and other accessories:
546 ALLUM wall mounted luminaire Rugby complete with 1 x18W PLC lamp and UV-stabilised polycarbonate diffuser.
no $70.40 Z0205
547 ARCLUCE ceiling mounted luminaire Monos complete with1x 18W fluorescent, body in extruded aluminium andreeded clear high impact acrylic diffuser.
no $150.30 Z0104
548 ARCLUCE ceiling mounted luminaire Monos complete with1x 36W fluorescent, body in extruded aluminium andreeded clear high impact acrylic diffuser.
no $206.70 Z0105
Page 50 of 69
HOUSING AND DEVELOPMENT BOARDSTANDARD SCHEDULE OF RATES FOR ELECTRICAL WORKS (JUL 2013)
S/N DESCRIPTION UNIT RATE($) CODE
H EXTERNAL LIGHTING (CONT'D)
Linkbuilding, Linkway Lights, Steplights, Buried Floodlights & Indoor Lights (Cont'd)
Lighting luminaires complete with integral controlgears and other accessories (Cont'd):
549 DIL-MESADO Square surface mounted luminaireMSL.211, housing in die cast aluminium coated with epoxypowder paint, sand blasted UV-stabilised polycarbonatediffuser, hammered aluminium reflector complete with 2 x11W PL warm-white compact fluorescent lamp.
no $122.20 Z0207
550 EXTERIEUR VERT, buried light fitting, M2 IP67 rating, inanodized aluminium housing with mechanical resistanceglass of 8T (or anti vandal polycarbonate 4T), FM 11Wlamp, electronic control gear.
no $494.20 Z0151
551 GHIDINI wall mounted luminaire Ovalla 1101, completewith die-cast aluminium body and opal diffuser, directmounting 2 x 11W PL lamp.
no $151.50 Z0123
552 GHIDINI wall mounted luminaire Ovalla 1103, completewith die-cast aluminium body and opal diffuser, sidemounting 2 x 11W PL lamp.
no $160.70 Z0124
553 GHIDINI wall mounted luminaire Ovalla 1104, completewith die-cast aluminium body and opal diffuser, endmounting 2 x 11W PL lamp.
no $166.40 Z0125
554 VINIC 500601 wall mount luminaire complete with 45Wenergy lamp, integrated ballast, die cast aluminiumhousing, reflector, 5mm thick clear tempered glass lensreflector and bracket.
no $933.50 Z1128
555 UNIVERSAL 114 slim surface wall mount luminairecomplete with 1 x 14/21/28/35W T5 fluorescent lamp,polyster powder coated electro-galvanised steel andpolyster coated reflector.
no $69.80 Z1129
Page 51 of 69
HOUSING AND DEVELOPMENT BOARDSTANDARD SCHEDULE OF RATES FOR ELECTRICAL WORKS (JUL 2013)
S/N DESCRIPTION UNIT RATE($) CODE
H EXTERNAL LIGHTING (CONT'D)
Linkbuilding, Linkway Lights, Steplights, Buried Floodlights & Indoor Lights (Cont'd)
Lighting luminaires complete with integral controlgears and other accessories (Cont'd):
556 GOCCIA wall/ceiling luminaire Triangolo 4322 completewith 2 x PL 11W lamps and vandal-proof acrylic diffuser.
no $203.20 Z0096
557 GOCCIA wall/ceiling luminaire Triangolo 4346 completewith 2 x PL-L18W lamps and vandal-proof acrylic diffuser.
no $222.20 Z0097
558 GOCCIA wall/ceiling luminaire Triangolo 4380 completewith 1 x 80W super deluxe mercury lamp.
no $312.00 Z0098
559 IGUZZINI 1176 wall washer screen finish in black only foritems Z0135 to Z0148.
no $82.50 Z0150
560 IGUZZINI 1177 louvre finish in black only for items Z0135to Z0148.
no $99.70 Z0149
561 IGUZZINI outdoor floodlight PLATEA 7376 in die-castaluminium, super pure aluminium reflector with flood beamand 2 x 26W TCT compact fluorescent lamp.
no $565.50 Z0144
562 IGUZZINI outdoor floodlight PLATEA 7377 in die-castaluminium, super pure aluminium reflector withasymmetrical beam and 70W metal halide or high pressuresodium lamp.
no $772.50 Z0135
563 IGUZZINI outdoor floodlight PLATEA 7378 in die-castaluminium, super pure aluminium reflector withasymmetrical beam and 150W metal halide or highpressure sodium lamp.
no $795.50 Z0136
564 IGUZZINI outdoor floodlight PLATEA 7379 in die-castaluminium, super pure aluminium reflector with flood beamand 70W metal halide or high pressure sodium lamp.
no $640.20 Z0138
565 IGUZZINI outdoor floodlight PLATEA 7380 in die-castaluminium, super pure aluminium reflector with flood beamand 150W metal halide or high pressure sodium lamp.
no $680.50 Z0139
Page 52 of 69
HOUSING AND DEVELOPMENT BOARDSTANDARD SCHEDULE OF RATES FOR ELECTRICAL WORKS (JUL 2013)
S/N DESCRIPTION UNIT RATE($) CODE
H EXTERNAL LIGHTING (CONT'D)
Linkbuilding, Linkway Lights, Steplights, Buried Floodlights & Indoor Lights (Cont'd)
Lighting luminaires complete with integral controlgears and other accessories (Cont'd):
566 IGUZZINI outdoor floodlight PLATEA 7385 in die-castaluminium, super pure aluminium reflector with spot beamand 70W G12 metal halide lamp.
no $686.20 Z0145
567 IGUZZINI outdoor floodlight PLATEA 7386 in die-castaluminium, super pure aluminium reflector with spot beamand 150W G12 metal halide lamp.
no $726.50 Z0146
568 IGUZZINI outdoor floodlight PLATEA 7387 in die-castaluminium, super pure aluminium reflector with blade-of-light beam and 70W G12 metal halide lamp.
no $853.00 Z0147
569 IGUZZINI outdoor floodlight PLATEA 7388 in die-castaluminium, super pure aluminium reflector with blade-of-light beam and 150W G12 metal halide lamp.
no $893.20 Z0148
570 IGUZZINI outdoor floodlight PLATEA 7394 in die-castaluminium, super pure aluminium reflector with flood beamand 250W metal halide lamp.
no $761.00 Z0140
571 IGUZZINI outdoor floodlight PLATEA 7395 in die-castaluminium, super pure aluminium reflector withasymmetrical beam and 250W metal halide lamp.
no $899.00 Z0137
Page 53 of 69
HOUSING AND DEVELOPMENT BOARDSTANDARD SCHEDULE OF RATES FOR ELECTRICAL WORKS (JUL 2013)
S/N DESCRIPTION UNIT RATE($) CODE
H EXTERNAL LIGHTING (CONT'D)
Linkbuilding, Linkway Lights, Steplights, Buried Floodlights & Indoor Lights (Cont'd)
Lighting luminaires complete with integral controlgears and other accessories (Cont'd):
572 KL LICHT wall mounted luminaire Trapez 5007 completewith 70W SON/80W or 125W super deluxe mercury, bodyin cast aluminium and frosted UV-stabilized polycarbonatediffuser.
no $1,255.50 Z0103
573 KL LICHT wall mounted luminaire Zylinder-Quadro 1581complete with 70W SON/50W or 80W super deluxemercury, body in cast aluminium and cylindrical opal UV-stabilized polycarbonate diffuser.
no $1,957.00 Z0101
574 KL LICHT wall mounted luminaire Zylinder-Quadro 1583complete with 70W SON/50W or 80W super deluxemercury, body in cast aluminium with anti-glare louvres andbuilt in cylindrical clear UV-stabilized polycarbonatediffuser.
no $2,060.50 Z0102
575 LUCERNE wall mounted luminaire 502 complete with 2 x11W PL, body in die-cast aluminium and frosted UV-stabilized polycarbonate diffuser.
no $195.20 Z0099
576 LUCERNE wall mounted luminaire 502 complete with 2 x13W or 18W PLC, body in die-cast aluminium and frostedUV-stabilized polycarbonate diffuser.
no $220.50 Z0100
577 MARTIN MULLER ceiling mounted luminaire Cat No.Cristal 211 complete with 2 x 11W PL lamp, high impactresistant acrylic satine diffuser, die-cast aluminium baseand hinged frame and high purity aluminium reflector.
no $128.50 Z0208
Page 54 of 69
HOUSING AND DEVELOPMENT BOARDSTANDARD SCHEDULE OF RATES FOR ELECTRICAL WORKS (JUL 2013)
S/N DESCRIPTION UNIT RATE($) CODE
H EXTERNAL LIGHTING (CONT'D)
Linkbuilding, Linkway Lights, Steplights, Buried Floodlights & Indoor Lights (Cont'd)
Lighting luminaires complete with integral controlgears and other accessories (Cont'd):
578 NORAL surface mounted luminaire Santa Cruz completewith UV-stabilised polycarbonate diffuser, silver reflector, 2x 11W PL energy saving lamp, standard black or whitefinish.
no $163.00 Z0206
579 NOVALUX decorative column/wall mounted luminaire Type5510 of thermosetting body complete with either white orblack finish, frosted diffuser and 2 x PLC 18W lamp.
no $157.20 Z0091
580 NOVALUX decorative column/wall mounted luminaire Type5512 of thermosetting body complete with either white orblack finish, frosted diffuser and 2 x PL 11W lamp.
no $157.20 Z0090
581 NOVALUX decorative column/wall mounted luminaire Type5514 of thermosetting body complete with either white orblack finish, frosted diffuser and 1 x PLC 18W lamp.
no $157.20 Z0089
582 PLATEK wall mounted luminaire Cat No. Bahia completewith 1 x 18W PLC lamp UV-stabilised polycarbonatediffuser, parabolic aluminium reflector and die-castaluminium body.
no $169.40 Z0201
Page 55 of 69
HOUSING AND DEVELOPMENT BOARDSTANDARD SCHEDULE OF RATES FOR ELECTRICAL WORKS (JUL 2013)
S/N DESCRIPTION UNIT RATE($) CODE
H EXTERNAL LIGHTING (CONT'D)
Linkbuilding, Linkway Lights, Steplights, Buried Floodlights & Indoor Lights (Cont'd)
Lighting luminaires complete with integral controlgears and other accessories (Cont'd):
583 SIEMENS Sicompact Mini floodlight cat. no 5NA-747-1-2 ofdie-cast aluminium housing, hammered aluminium reflectorand tempered glass lense complete with 1 x 70W metalhalide lamp.
no $306.70 Z0129
584 SIEMENS Sicompact Mini floodlight cat. no 5NA-747-2-2 ofdie-cast aluminium housing, hammered aluminium reflectorand tempered glass lense complete with 1 x 150W metalhalide lamp.
no $330.90 Z0130
585 SIMES surface mounting luminaire Sherma Art.S.6215complete with 1 x PLL-18W compact fluorescent lamp.
no $203.20 Z0093
586 SIMES uplight luminaire Megaflat Round BuriedDrive/Walk Over Art.S.4790 complete with 1 x MH-150Wmetal halide lamp, clear toughened clear glass diffuser,polypropylene tube for recess, IP67.
no $2,237.60 Z0134
587 SIMES uplight luminaire Ring Drive/Walk Over Art.S.4928complete with 1 x PLCT-18W lamp, toughened clear glassdiffuser, polypropylene tube for recess, IP 67.
no $765.60 Z0131
588 SIMES uplight luminaire Ring Drive/Walk Over Art.S.4929complete with 1 x PLCT-18W lamp, toughened acidatedglass diffuser, polypropylene tube for recess, IP 67.
no $740.30 Z0132
589 SIMES uplight luminaire Ring Drive/Walk Over Art.S.4930complete with 1 x 70W metal halide lamp, toughenedacidated glass diffuser, polypropylene tube for recess, IP67.
no $1,382.00 Z0133
590 SIMES wall/ceiling mounted luminaire Art.S.6749 with UV-stabilised polycarbonate diffuser complete with 18W PLClamp.
no $177.90 Z0203
591 SIMES wall/ceiling mounted luminaire MEGAVEDOROUND Art.S.6869 with PMMA diffuser and 2 x 11W PLlamp.
no $206.70 Z0210
592 SPECTRA UPLIGHTER TRENTO S13104 complete with80W mercury super deluxe lamp and high strengthborosilicate glass.
no $1,623.50 Z0155
Page 56 of 69
HOUSING AND DEVELOPMENT BOARDSTANDARD SCHEDULE OF RATES FOR ELECTRICAL WORKS (JUL 2013)
S/N DESCRIPTION UNIT RATE($) CODE
H EXTERNAL LIGHTING (CONT'D)
Linkbuilding, Linkway Lights, Steplights, Buried Floodlights & Indoor Lights (Cont'd)
Lighting luminaires complete with integral controlgears and other accessories (Cont'd):
593 SPECTRA UPLIGHTER TRENTO S13106 complete with125W mercury super deluxe lamp and high strengthborosilicate glass.
no $1,658.00 Z0156
594 SPECTRA UPLIGHTER TRENTO S13110 complete with70W metal halide lamp and high strength borosilicateglass.
no $1,738.50 Z0152
595 SPECTRA UPLIGHTER TRENTO S13112 complete with100W metal halide lamp and high strength borosilicateglass.
no $1,830.50 Z0153
596 SPECTRA UPLIGHTER TRENTO S13114 complete with150W metal halide lamp and high strength borosilicateglass.
no $1,876.50 Z0154
597 SPECTRA UPLIGHTER TRENTO S13120 complete with70W SON lamp and high strength borosilicate glass.
no $1,750.00 Z0157
598 SPECTRA WASHLIGHTER TRENTO S13200 completewith 70W metal halide lamp and high strength borosilicateglass.
no $1,761.50 Z0158
599 SPECTRA WASHLIGHTER TRENTO S13205 completewith 150W metal halide lamp and high strength borosilicateglass.
no $1,876.50 Z0159
600 SPECTRA WASHLIGHTER TRENTO S13210 completewith 70W SON lamp and high strength borosilicate glass.
no $1,761.50 Z0160
601 Stainless steel louvre (anti-glare) TTL 90°/TTL 150° foritems Z0152 to Z0160.
no $163.00 Z0161
602 Surface wall mounted luminaire cat no. Tubo5700.NK.P109.1 of alloy housing, built-in capsulated ballastand polycarbonate diffuser complete with Osram DuluxS9w lamp.
no $197.50 Z0092
603 LIGMAN wall mounted luminaire Cat No. 30302 completewith 1 x 18W PLC lamp, IP 55, opal UV stabilisedpolycarbonate diffuser, die-cast aluminium body andfaceplate louvre.
no $126.20 Z0202
Page 57 of 69
HOUSING AND DEVELOPMENT BOARDSTANDARD SCHEDULE OF RATES FOR ELECTRICAL WORKS (JUL 2013)
S/N DESCRIPTION UNIT RATE($) CODE
H EXTERNAL LIGHTING (CONT'D)
Linkbuilding, Linkway Lights, Steplights, Buried Floodlights & Indoor Lights (Cont'd)
604 WE-EF accent floodlight, IP55 FL131-DT-18(.B), corrosionresistant die-cast aluminium alloy body and frame, finish inRAL polyester powder coat, thermal shock resistant safetyglass, weatherproof and durable silicone rubber gasket andElectronic 20W lamp.
no $622.00 Z0128
605 WE-EF steplight, IP 55 STG259-DD-13(I) or 18(I) corrosionresistant die-cast aluminium alloy body and frame,polycarbonate UV-stabilized and vandal resistant diffuser,two cable entries to facilitate through wiring, and Electronic15W lamp.
no $177.00 Z0126
606 WE-EF steplight, IP 55 STL259-DD-13(I) or 18(I) corrosionresistant die-cast aluminium alloy body and frame,polycarbonate UV-stabilized and vandal resistant diffuser,two cable entries to facilitate through wiring, and Electronic15W lamp.
no $177.00 Z0127
607 WE-EF wall luminaire surface DLB259-DD-13(I) IP55,corrosion resistant die-cast aluminium alloy body andframe, finish in RAL polyester powder coat, polycarbonateUV-stabilized and vandal resistant diffuser, weatherproofand durable silicone gasket and Electronic 20W lamp.
no $251.50 Z0120
608 WE-EF wall luminaire surface DLB259-DD-18(I) IP55,corrosion resistant die-cast aluminium alloy body andframe, finish in RAL polyester powder coat, polycarbonateUV-stabilized and vandal resistant diffuser, weatherproofand durable silicone gasket and Electronic 20W lamp.
no $251.50 Z0121
609 WE-EF wall luminaire surface DLB259-DD-26(I) IP55,corrosion resistant die-cast aluminium alloy body andframe, finish in RAL polyester powder coat, polycarbonateUV-stabilized and vandal resistant diffuser, weatherproofand durable silicone gasket and Electronic 20W lamp.
no $251.50 Z0122
Page 58 of 69
HOUSING AND DEVELOPMENT BOARDSTANDARD SCHEDULE OF RATES FOR ELECTRICAL WORKS (JUL 2013)
S/N DESCRIPTION UNIT RATE($) CODE
H EXTERNAL LIGHTING (CONT'D)
Linkbuilding, Linkway Lights, Steplights, Buried Floodlights & Indoor Lights (Cont'd)
Lighting luminaires complete with integral controlgear, stainless steel screws and other accessories:
610 SPECTRUM LINK wall/ceiling mounted luminarie completewith 1 x 18W PLC lamp, die-cast aluminium body and highimpact resistant UV stabilised polycarbonate diffuser.
no $83.80 Z1001
611 BOLUCE ALFA ROUND 3020 wall/ceiling mountedluminarie complete with 1 x 18W PLC lamp, die-castaluminium body complete with cross guard and UVstabilized polycarbonate diffuser.
no $113.50 Z1014
612 SPRING SP-1018 round column/wall/ceiling mountedluminarie complete with 1 x 18W PLC lamp, die-castaluminium body with polyester powder finish,polymethylmethacrylate (PMMA) diffuser and Quick LockAllen Key Screws.
no $105.50 Z1018
613 GALA LUZ BELLE OVALE wall/ceiling mounted luminariecomplete with 1 x 18W PLC lamp, die-cast aluminium baseand polycarbonate housing and opal or frosted UVstabilized polycarbonate diffuser.
no $127.30 Z1037
614 LIGMAN 30084 wall mounted luminarie complete with 1 x18W PLC lamp, die-cast high corrosion resistant aluminiumhousing, durable silicone rubber gasket and UV stabilizedvandal proof polycarbonate diffuser.
no $114.70 Z1053
Page 59 of 69
HOUSING AND DEVELOPMENT BOARDSTANDARD SCHEDULE OF RATES FOR ELECTRICAL WORKS (JUL 2013)
S/N DESCRIPTION UNIT RATE($) CODE
H EXTERNAL LIGHTING (CONT'D)
Linkbuilding, Linkway Lights, Steplights, Buried Floodlights & Indoor Lights (Cont'd)
Lighting luminaires complete with integral controlgear, stainless steel screws and other accessories:
615 TECHNOLITE LUC290-118PLC round column/wall/ceilingmounted luminarie complete with 1 x 18W PLC lamp, die-cast aluminium body, strip-frosted UV stabilizedpolycarbonate diffuser and aluminium reflector.
no $126.20 Z1059
616 ARCLUCE MONOS 1020 extruded aluminiumcolumn/wall/ceiling mounted luminarie complete with 1 x18W linear fluorescent lamp and metallised aluminiumlouver.
no $127.30 Z1060
617 HUGO 5301 wall/ceiling mounting luminarie complete with1 x PLC-18W/G24d-2 (3000Kº) warm-white CompactFluorescent lamp, die-cast aluminium housing and frostedpolycarbonate diffuser.
no $75.00 Z1068
618 SPECTRUM ALPHA surface mounted luminaire completewith 1 x 18W fluorescent lamp, electro-galvanised steelsheet metal body with polyester powder coated finish,aluminium or electro-galvanised steel sheet metal withpolyester powder coated reflector.
no $74.50 Z1002
619 SPECTRUM ALPHA surface mounted luminaire completewith 2 x 18W fluorescent lamp, electro-galvanised steelsheet metal body with polyester powder coated finish,aluminium or electro-galvanised steel sheet metal withpolyester powder coated reflector.
no $84.90 Z1003
620 WAVE (rounded) W(R)118 surface/ceiling mountedluminaires complete with 1 x 18W fluorescent lamp, coldsteel body with powder coated finish and powder coatedsteel or TR>=80% aluminium back reflector.
no $107.80 Z1008
621 WAVE (rounded) W(R)218 surface/ceiling mountedluminaires complete with 2 x 18W fluorescent lamp, coldsteel body with powder coated finish and powder coatedsteel or TR>=80% aluminium back reflector.
no $126.20 Z1009
622 ILMAS LAGUNA LG118 surface mounted luminairecomplete with 1 x 18W fluorescent lamp, electro-galvanised steel body with smooth epoxy-powder coatingfinish and aluminium reflector.
no $76.70 Z1015
Page 60 of 69
HOUSING AND DEVELOPMENT BOARDSTANDARD SCHEDULE OF RATES FOR ELECTRICAL WORKS (JUL 2013)
S/N DESCRIPTION UNIT RATE($) CODE
H EXTERNAL LIGHTING (CONT'D)
Linkbuilding, Linkway Lights, Steplights, Buried Floodlights & Indoor Lights (Cont'd)
Lighting luminaires complete with integral controlgear, stainless steel screws and other accessories:
623 ILMAS LAGUNA LG218 surface mounted luminairecomplete with 2 x 18W fluorescet lamp, electro-galvanisedsteel body with smooth epoxy-powder coating finish andaluminium reflector.
no $88.20 Z1016
624 SIMLITE BSS120 surface mounted luminaire complete with1 x 18W fluorescent lamp, galvanised sheet steel housingwith epoxy powder coating finish and glossy epoxy powderreflector.
no $80.20 Z1033
625 SIMLITE BSS120 surface mounted luminaire complete with2 x 18W fluorescent lamp, galvanised sheet steel housingwith epoxy powder coating finish and glossy epoxy powderreflector.
no $91.70 Z1034
626 GALA LUZ decorative surface mounted luminaire FARGOcomplete with 1 x 18W tubular linear fluorescent lamp,extruded aluminium body with polyester powder coatedfinish and matt aluminium reflector.
no $99.70 Z1038
627 GALA LUZ decorative surface mounted luminaire FARGOcomplete with 2 x 18W tubular linear fluorescent lamp,extruded aluminium body with polyester powder coatedfinish and matt aluminium reflector.
no $111.20 Z1039
628 LUCAS decorative surface mounted luminiare PICASSOSeries HE6002 complete with 1 x 18W tubular (linearfluorescent) lamp, powder coated electro-galvanised sheetsteel housing and reflector and mounting accessories.
no $81.30 Z1041
629 LUCAS decorative surface mounted luminiare PICASSOSeries HE6003 complete with 2 x 18W tubular (linearfluorescent) lamp, powder coated electro-galvanised sheetsteel housing and reflector and mounting accessories.
no $92.80 Z1042
630 AEROLITE TREO/118/E surface mounted luminariecomplete with 1 x 18W fluorescent lamp, electro-galvanised steel body with polyester coating finish,aluminium matt finish or electro-galvanised steel reflectorwith polyester coating finish.
no $65.20 Z1049
Page 61 of 69
HOUSING AND DEVELOPMENT BOARDSTANDARD SCHEDULE OF RATES FOR ELECTRICAL WORKS (JUL 2013)
S/N DESCRIPTION UNIT RATE($) CODE
H EXTERNAL LIGHTING (CONT'D)
Linkbuilding, Linkway Lights, Steplights, Buried Floodlights & Indoor Lights (Cont'd)
Lighting luminaires complete with integral controlgear, stainless steel screws and other accessories:
631 AEROLITE TREO/218/E surface mounted luminariecomplete with 2 x 18W fluorescent lamp, electro-galvanised steel body with polyester coating finish,aluminium matt finish or electro-galvanised steel reflectorwith polyester coating finish.
no $74.40 Z1050
632 FORMULA 1 F1XZ114R surface mounted luminairecomplete with 1 x 14W linear fluorescent lamp, cold rollsteel body with powder coating finish and aluminiumreflector.
no $99.70 Z1065
633 FORMULA 1 F1XZ214R surface mounted luminairecomplete with 2 x 14W linear fluorescent lamp, cold rollsteel body with powder coating finish and aluminiumreflector.
no $111.20 Z1066
634 HUGO – F.120.FMR surface ceiling mounted luminariecomplete with 1 x FLT-18W/G13 (3000Kº) warm-whitetubular fluorescent lamp, heavy gauge electro-galvanisedsteel base with extruded aluminium rounded side housingand matt aluminium reflector.
no $80.80 Z1069
635 HUGO – F.220.FMR surface ceiling mounted luminariecomplete with 2 x FLT-18W/G13 (3000Kº) warm-whitetubular fluorescent lamp, heavy gauge electro-galvanisedsteel base with extruded aluminium rounded side housingand matt aluminium reflector.
no $92.30 Z1070
Page 62 of 69
HOUSING AND DEVELOPMENT BOARDSTANDARD SCHEDULE OF RATES FOR ELECTRICAL WORKS (JUL 2013)
S/N DESCRIPTION UNIT RATE($) CODE
H EXTERNAL LIGHTING (CONT'D)
Linkbuilding, Linkway Lights, Steplights, Buried Floodlights & Indoor Lights (Cont'd)
Lighting luminaires complete with approved electronic magnetic ballast(s) and other accessories:
636 VEWA CUBIC C118 recessed downlight complete with 1 x18W PLC Compact Fluorescent lamp, powder coated steelframe body with square shape die-cast silver aluminiumtrim and matt aluminium reflector.
no $96.30 Z1010
637 VEWA CUBIC C213 recessed downlight complete with 2 x13W PLC Compact Fluorescent lamp, powder coated steelframe body with square shape die-cast silver aluminiumtrim and matt aluminium reflector.
no $110.10 Z1011
638 GE FOH8621 213L recessed downlight complete with 2 x13W PLC Compact Fluorescent lamp, powder coated steelframe body, matt aluminium reflector and extrudedaluminium housing.
no $76.70 Z1021
639 ILLIS IL-16003 recessed downlight complete with 1 x 18Wor 2 x 13W PLC Compact Fluorescent lamp, powdercoated steel frame body and matt aluminium reflector.
no $64.10 Z1040
640 LUCENT HS6182H ceiling recessed downlight completewith 1 x 18W or 2 x 13W PLC Compact Fluorescent lamp,powder coated steel frame body and electro-galvanisedsheet housing with frosted reflector.
no $65.20 Z1043
641 LEOLITE 6022 recessed downlight complete with 2 x 13WPLC Compact Fluorescent lamp, electro-galvanised steelframe, die-cast aluminium trim and sand blasted aluminiumreflector.
no $57.20 Z1051
642 LUMITECH 0750 recessed downlight complete with 2 x13W PLC Compact Fluorescent lamp, powder paintedwhite metal trim body and matt anodised aluminumreflector.
no $68.70 Z1054
643 THORN Chalice 2 CDHS 213M recessed downlightcomplete with PLC 13W / 2Pin Compact Fluorescent lamp(twin), zinc coated steel with epoxy painted white metalbezel body and matt anodised aluminium reflector.
no $68.70 Z1067
Page 63 of 69
HOUSING AND DEVELOPMENT BOARDSTANDARD SCHEDULE OF RATES FOR ELECTRICAL WORKS (JUL 2013)
S/N DESCRIPTION UNIT RATE($) CODE
H EXTERNAL LIGHTING (CONT'D)
Linkbuilding, Linkway Lights, Steplights, Buried Floodlights & Indoor Lights (Cont'd)
Lighting luminaires complete with integral controlgear, stainless steel screws and other accessories:
644 ITAC - RDL6182H ceiling recessed downlight completewith 1 x 18W or 2 x 13W PLC Compact Fluorescent lamp,polyester powder coated electro-galvanised steel framebody, die-cast aluminium trim housing and matt anodisedaluminium reflector.
no $59.50 Z1071
Aviation Obstruction Light
645 Twin units aviation obstruction light (lightmast, control box,cables, cable trunking/tray & conduits measuredseparately).
no $868.90 SZ961
646 Twin units aviation obstruction light complete with lightingcontrol box and lightmast (cables, cable trunking/tray &conduits measured separately).
no $937.90 SZ905
I EMERGENCY/EMERGENCY EXIT SIGN LUMINAIRES
647 1x8W/10W slim maintained emergency exit light (single ordouble sided) surface or recessed mounting andwith/without (arrows) complete with 2 hrs ni-cad batteries,IP 20.
no $81.60 SZ658
648 2x8W box type sustained emergency exit light (single ordouble sided) complete with 2 hrs ni-cad batteries, IP30.
no $71.70 SZ660
Page 64 of 69
HOUSING AND DEVELOPMENT BOARDSTANDARD SCHEDULE OF RATES FOR ELECTRICAL WORKS (JUL 2013)
S/N DESCRIPTION UNIT RATE($) CODE
I EMERGENCY/EMERGENCY EXIT SIGN LUMINAIRES (CONT'D)
649 2x8W box type non-maintained emergency light completewith 2hrs ni-cad batteries, IP30.
no $71.00 SZ663
650 Dia. 5mm white LED type maintained emergency exit light(single or double sided) with or without arrows, completewith 2 hrs ni-cad batteries, IP30.
no $102.00 Z0233
651 Dia. 5mm white LED type non-maintained emergency exitlight complete with 2 hrs ni-cad batteries, IP30.
no $82.80 Z0234
652 2x5W tungsten halogen lamps non-maintained floodlightemergency light complete with 1.5 hrs maintenance freelead acid batteries, IP20.
no $72.80 SZ666
653 1x10W halogen lamp miniature recessed mounted non-maintained emergency light complete with 1.5 hrsmaintenance free lead acid batteries, IP20.
no $70.20 SZ668
654 Emergency conversion kit for 18W and 36W tubularfluorescent lamp for 2 hrs rated duration.
no $70.20 SZ671
655 White LED Internal Exit Light complete with 2-hour nickel cadmium batteries, IP 30.
no $94.00 Z0214
Page 65 of 69
HOUSING AND DEVELOPMENT BOARDSTANDARD SCHEDULE OF RATES FOR ELECTRICAL WORKS (JUL 2013)
S/N DESCRIPTION UNIT RATE($) CODE
J FIRE ALARM ACCESSORIES
656 Manual break glass call point. no $33.70 SZ672
657 Weather resistant gasket for weatherproof manual callpoint.
no $36.50 SZ673
658 Weatherproof manual break glass call point complete withgasket (IP65).
no $149.70 SZ674
659 Ionisation smoke detector complete with LED and mountingbase.
no $76.00 SZ675
660 Optical smoke detector complete with LED and mountingbase.
no $73.20 SZ676
661 Fixed temperature cum Rate of Rise (ROR) heat detector(Type A) complete with LED and mounting base.
no $51.40 SZ677
662 Fixed temperature heat detector (Type B) complete withLED and mounting base.
no $50.50 SZ678
663 Fixed temperature heat detector (Type D) complete withLED and mounting base.
no $59.40 SZ679
664 Fixed temperature bi-metallic heat detector (Type B orGrade 2) complete with LED .
no $45.00 Z0245
665 Fixed temperature bi-metallic heat detector (Type D)complete with LED.
no $54.00 Z0246
666 Alarm bell. no $42.90 SZ680
667 Alarm bell complete with integral strobe light. no $103.60 SZ681
668 Weatherproof base box for alarm bell. no $42.60 SZ682
669 Weatherproof strobe light 24V dc (IP65). no $71.90 SZ683
Page 66 of 69
HOUSING AND DEVELOPMENT BOARDSTANDARD SCHEDULE OF RATES FOR ELECTRICAL WORKS (JUL 2013)
S/N DESCRIPTION UNIT RATE($) CODE
K TELEVISION SYSTEM
Broadband
670 Bridger Amplifier (cable TV distribution amplifier) no. $2,946.20
671 Trunk Amplifier (cable TV distribution amplifier) no. $3,367.00
Accessories (for Bridger/Trunk amplifier)
672 Cable Attenuator - SPB-X (where X denotes 0 to 20) no. $37.60
673 Cable Equaliser no. $55.70
674 Cable Simulator no. $71.40
675 Plug-in Directional Coupler no. $109.40
676 Plug-in Splitter no. $109.40
Coaxial Cable
677 Coaxial Cable (for RG-6 type) m $1.50
678 Coaxial Cable (for 'solid' type) m $9.00
679 Coaxial Cable (for underground type) m $10.30
S Connector
680 Connector ('F' Male) (for RG-6 type) no. $2.60
681 Connector ('F' Male) (for '412' type) no. $24.00
682 Connector ('F' Male) (for '540' type) no $26.00
683 Connector (pin) (for '412' type) no. $28.60
684 Connector (pin) (for '540' type) no. $29.90
685 Connector (splice) (for '412' type) no. $59.60
686 Connector (splice) (for '540' type) no. $84.30
687 Connector (terminator) (for RG-6 type) no. $2.20
688 Connector (terminator) (for unused port of OUTDOOR tap, etc) no. $18.40
20A Isolator
689 Master Key Switch type no. $136.00
Page 67 of 69
HOUSING AND DEVELOPMENT BOARDSTANDARD SCHEDULE OF RATES FOR ELECTRICAL WORKS (JUL 2013)
S/N DESCRIPTION UNIT RATE($) CODE
K TELEVISION SYSTEM (CONT'D)
Power Supply
690 Power Supply (2A) (for cable TV) no. $716.90
691 Power Supply (3A) (for cable TV) no. $716.90
692 Power Supply (4A) (for cable TV) no. $716.90
693 Power Supply (6A) (for cable TV) no. $844.40
694 Power Supply (9A) (for cable TV) no. $990.10
695 Power Supply (15A) (for cable TV) no. $2,123.90
Splitter
696 Splitter (2-way) (indoor) no. $22.70
697 Splitter (3-way) (indoor) no. $28.60
698 Splitter (4-way) (indoor) no. $31.00
699 Splitter (8-way) (indoor) no. $56.40
700 Splitter (2-way) (outdoor) no. $230.60
701 Splitter (3-way) (outdoor) no. $235.60
Subscriber Outlet - Isolator
702 Outlet (Isolator type) no. $26.10
703 Outlet (base, 1 ½ gang type) no. $26.10
704 Outlet (base, 2 gang type) no. $32.60
705 Outlet (TV/FM front plate, 1½ gang type) no. $27.90
706 Outlet (TV/FM front plate, 2 gang type) no. $32.60
Page 68 of 69
HOUSING AND DEVELOPMENT BOARDSTANDARD SCHEDULE OF RATES FOR ELECTRICAL WORKS (JUL 2013)
S/N DESCRIPTION UNIT RATE($) CODE
K TELEVISION SYSTEM (CONT'D)
Tee Unit
707 Tee unit (2-way) (outdoor) no. $87.60
708 Tee unit (4-way) (outdoor) no. $98.40
709 Tee unit (8-way) (outdoor) no. $149.90
710 Tee unit (Directional Coupler) no. $181.30
711 Tee unit (Power Inserter) no. $235.60
Metal Conduits - BS4568 including painting and others associated with the work
712 20 mm diameter m $12.70
713 25 mm diameter m $15.20
PVC Conduits - HEAVY GAUGE including painting and others associated with the work
714 20 mm diameter m $4.10
715 25 mm diameter m $4.60
716 50 mm diameter m $9.80
717 110 mm diameter m $36.70
Page 69 of 69
HOUSING AND DEVELOPMENT BOARDSTANDARD SCHEDULE OF RATES FOR ELECTRICAL WORKS (JUL 2013)
S/N DESCRIPTION UNIT RATE($) CODE
K TELEVISION SYSTEM (CONT'D)
Miscellaneous Items
718 Metal Tap-Off box (Heavy duty type) - (200(L) x 200(B) x 600(H)) mm approx., with lock & concrete mix base (400(L) x 400(B) x 300(H)) mm approx.
no. $162.00
719 Metallic tee/splitter box (200(L) x 180(B) x 350(H)) mm approx.
no. $93.90
720 Metallic tee/splitter box (200(L) x 180(B) x 300(H)) mm approx.
no. $87.60
721 Metallic tee/splitter box (180(L) x 120(B) x 300(H)) mm approx.
no. $81.00
722 Metal concealed isolator box (80(L) x 38(B) x 110(H)) mm approx.
no. $46.60
723 Amplifier bracket complete powder coating (for Cable TV distribution amplifier)
no. $55.10
724 PVC trunking inclusive of PVC saddles & 'Hilti' nails or equivalent (20 x 40) mm approx.
m $4.00
725 PVC trunking inclusive of PVC saddles & 'Hilti' nails or equivalent (50 x 50) mm approx.
m $7.80
726 PVC trunking inclusive of PVC saddles & ‘Hilti’ nails or equivalent (100 x 50) mm approx
m $15.90