hazleton area high schooldate: 10/06/2011 hazleton area school district bid catalog 190 (2012-2013)...

DATE: 10/06/2011 HAZLETON AREA SCHOOL DISTRICT BID CATALOG 190 (2012-2013) MECHANICAL / AUTO TOOLS

--------------------------------------------------------------------------------------------- STOCK ITEM/ QTY UNIT OF UNIT TOTAL DESCRIPTION MEASURE PRICE PRICE ---------------------------------------------------------------------------------------------

1 | P a g e

ABEQ020 _________ SET(S) 18.95 __________

PN 207FTXY SET TORX T27 T30 T40

T45 T50 T55 T60 "SNAP-ON"

ABEQ030 _________ EACH 0.00 __________

YA1440 ADJUSTER 2 1/2" LONG 4 MM HEX HEAD

ABEQ040 _________ EACH 0.00 __________

DA SANDER SNAP AT400A

ABEQ050 _________ EACH 0.00 __________

IM10B 1/2" DRIVE IMPACT WRENCH

ABEQ060 _________ EACH 0.00 __________

BF700 GRAVITY FEED SPRAY GUN

INCLUDES BF703 CUP AND PRESS

ABEQ070 _________ EACH 0.00 __________

BF600SYS HVLP SPRAY GUN SYSTEM

ABEQ080 _________ EACH 0.00 __________

PN POR3A 3/8" REVERSABLE DRILL

(AIR) SNAP ON

ABEQ110 _________ EACH 0.00 __________

AT190 RECIPROCATING SAW

ABEQ120 _________ EACH 0.00 __________

PH505H AIR HAMMER SET

ABEQ130 _________ EACH 0.00 __________

520A HEAVY DUTY AIR CONTROL UNIT

ABEQ140 _________ EACH 0.00 __________

HP300 LARGE BLIND RIVET SET

LONG HANDLE

ABEQ410 _________ EACH 0.00 __________

YA501B LOCK OUT TOOL SET

ABHM010 _________ EACH 0.00 __________

HAMMER SHORT BLUNT PICK SNAP

ON BF631 OR EQUAL

ABHM020 _________ EACH 0.00 __________

HAMMER SHRINKING SNAP ON BF617

OR EQUAL

ABHM030 _________ EACH 0.00 __________

SLIDE HAMMER

ABHM040 _________ EACH 0.00 __________

LIGHT DINGING SPOON (SNAP ON)

ABHM050 _________ EACH 0.00 __________

HAMMER PICKING AND DIGGING SNAP

ON BF611 OR EQUAL



2 | P a g e

ABHM060 _________ EACH 0.00 __________

HAMMER SHORT CURVE CROSS PEAN

SNAP ON BF608 OR EQUAL

ABHM070 _________ EACH 0.00 __________

HAMMER CURVE LITE BUMP SNAP-ON

OR EQUAL

ABIT010 _________ EACH 0.00 __________

3/16 AUGER BITS SOLID CENTER IRWIN

OR EQUAL

ABIT011 _________ EACH 0.00 __________

4/16 AUGER BITS IRWIN SOLID CENTER

OR EQUAL

ABIT012 _________ EACH 0.00 __________

5/16 AUGER BITS IRWIN SOLID CENTER

OR EQUAL

ABIT013 _________ EACH 0.00 __________

6/16 AUGER BITS IRWIN SOLID CENTERS

OR EQUAL

ABIT014 _________ EACH 0.00 __________


OR EQUAL

ABIT015 _________ EACH 0.00 __________


OR EQUAL

ABIT016 _________ EACH 0.00 __________


OR EQUAL

ABIT017 _________ EACH 0.00 __________


OR EQUAL

ABIT018 _________ EACH 0.00 __________


OR EQUAL

ABIT019 _________ EACH 0.00 __________


OR EQUAL

ABIT020 _________ EACH 0.00 __________


OR EQUAL

ABIT021 _________ EACH 0.00 __________


#62T OR EQUAL

ABIT022 _________ EACH 0.00 __________

15/16 AUGER BITS IRWIN SOLID CENTERS #62T OR EQUAL



3 | P a g e

ABIT023 _________ EACH 0.00 __________


OR EQUAL

ABIT024 _________ EACH 0.00 __________


OR EQUAL

ABIT025 _________ EACH 0.00 __________


OR EQUAL

ABIT026 _________ EACH 0.00 __________


OR EQUAL

ABIT027 _________ EACH 0.00 __________


OR EQUAL

ABRA001 _________ ROLL(S) 8.12 __________

ABRASIVE ROLL, ALUMINUM OXIDE GRIT,

320 GRIT, 50 YARDS / SHOP ROLL

MFG. = TRU-MAXX (NO SUBSTITUTE)

MSC#01135946

ACCU001 _________ EACH 0.00 __________

ACCU-RITE DIGITAL READOUT MODE

LONGITUDINAL TRAVEL - 36

ACDG010 _________ GAL 0.00 __________

AURIL CLEANER DEGREASER ALL

PURPOSE CLEANER

ACDG020 _________ PKG(S) 0.00 __________

PARTS CLEANING BRUSHES 1" DIA. 2-3/4"

LENGTH BRISTLE NYLON

ACHL010 _________ EACH 12.33 __________

FLAT CHISEL, MIDGET, 5/16 POINT EDGE,

4 1/8" LENGTH

SNAP-ON #PPC 408A OR APPROVED EQUAL.

ACHL020 _________ EACH 10.98 __________

FLAT CHISEL, 5/16 HEX SIZE, 3/8 POINT EDGE,

5 1/2 LENGTH SNAP-ON #PPC812A OR APPROVED EQUAL.

ACHL030 _________ EACH 12.84 __________


6" LENGTH

SNAP-ON #PPC-816A OR APPROVED EQUAL.

ACHL040 _________ EACH 15.27 __________

FLAT CHISEL 1/2 HEX SIZE 5/8 POINT EDGE,

6 1/2" LENGTH

SNAP-ON #PPC-82A OR APPROVED EQUAL



4 | P a g e

ACHL050 _________ EACH 20.73 __________


7 3/4" LENGTH

SNAP-ON #PPC-824A OR APPROVED EQUAL.

ACHL060 _________ EACH 12.90 __________

CAPE CHISEL, MIDGET, 9/32 HEX SIZE,

3/16 POINT EDGE,

3 7/8 LENGTH SNAP-ON #PPC

406A OR APPROVED EQUAL.

ACHL070 _________ EACH 14.82 __________

CAPE CHISEL, 5/16 HEX SIZE, 1/4"

POINT EDGE, 5 5/8 LENGTH

SNAP-ON #PPC13A OR APPROVED EQUAL.

ACUT001 _________ EACH 179.95 __________

ABRASIVE CUT-OFF MACHINE- 14", 15 AMP, 4

HP MOTOR DESIGNED FOR MAXIMUM

CUTTING EFFICIENCY, USES 14" X 3/32" X 1" CUT OFF

WHEELS, CAPACITIES 4" O.D. PIPE DIAMETER,

2-9/16" BAR STOCK, 5" SQUARE STOCK, A MAXIMUM

OPENING OF 9", TO BE MILWAUKEE #6175-6

OR APPROVED EQUAL.

ACUT002 _________ EACH 6.23 __________

ABRASIVE CUT-OFF WHEEL 1" ARBOR X 14" X 3/32" –

GENERAL PURPOSE

ADAP003 _________ EACH 0.00 __________

ADAPTER 1" X 3/4" ADAPTER IM SNAP ON

OR APPROVED EQUAL

ADAP004 _________ EACH 0.00 __________

ADAPTOR 3/4" TO 1" ADAPTOR IMPACT SNAP

ON IM 72 OR APP.

AERO001 _________ CAN(S) 8.88 __________

LAYOUT FLUID REMOVER, 12-3/4 OZ. VOLUME CAPACITY,

16 OZ. CAN, MSC #00264655

MFG. = ITW DYKEM #S00606

NO SUBSTITUTE

AGUN001 _________ EACH 239.00 __________

AIR IMPACT GUN- 1/2 DRIVE HIGH

SNAP-ON #IM5100

ANGL003 _________ EACH 69.05 __________

0-6O DEGREE ADJUSTABLE ANGLE BLOCK,

4" X 2" X 1-3/16"

ANGL004 _________ SET(S) 56.79 __________

SPI ANGLE PLATES, (3 / SET), 30-60-90

DEGREE ANGLE

APPL003 _________ EACH 0.00 __________

APPLICATOR POWER FLO FOR APPLY WIDE

VARIETY OF FINISHES. PUSH



5 | P a g e

APRN050 _________ EACH 5.53 __________

APRON STEINER RUBBER COATED LA 18 OZ.

COTTON BLACK YELLOW

ARBR001 _________ EACH 45.98 __________

JACOBS ARBOR NO. 3 M.T. W/3 JT

ARHO020 _________ EACH 0.00 __________

AIR TOOL CONTROL UNIT (0-150PS GAUGE –

SNAP-ON #AHR 430 or

ATBK010 _________ EACH 0.00 __________

HOLDER TOOL RIGHT SIDE HOLDS

REPLACEABLE CUTIING TIPS.

ATBK030 _________ EACH 3.18 __________

BITS TOOL REPLACEABLE 3 CUTTIN

EDGES PER TOOL BITS

ATBK040 _________ EACH 0.00 __________

BITS TOOL REPLACEABLE 6 CUTTIN

PER TOOL BIT CARBIDE

ATBK050 _________ EACH 0.00 __________

CUTTER VALVE SEAT NARROWER. SI

TO LISLE NO 48000 OR

ATBK060 _________ EACH 0.00 __________

COIL SPRING COMPRESSOR STANDAR

SCREW INCLUDED. SNAP-

ATBK070 _________ EACH 0.00 __________

CYLINDER HONES FOR 2" THRU 6

CYLINDERS INCLUDES

ATBK080 _________ EACH 0.00 __________

CYLINDER HONE REPLACEMENT STON

(220 GRIT) 4" LENGTH SNAP

ATBK090 _________ SET(S) 0.00 __________

SET OF 1/4 INCH-SHANK DIA.-CAR

CATALOG NO.-SE-1 SF-1

AUFI010 _________ EACH 0.00 __________

AUTO FILL MASTER CYLINDER FILL

BRAKE BLEEDERS WAEKON

AXRM020 _________ EACH 0.00 __________

SPINDLE PULLER FITS ALL COMMON

PICK-UP SPINDLES STEPPED

BAGS030 _________ PKG(S) 0.00 __________

HIGH EFFICIENCY FILTER BAGS 5/

MILWAUKEE #49-90-0445

BAGS051 _________ PKG(S) 0.00 __________

DISPOSABLE PAPER FILTER BAGS 5




6 | P a g e

BAGS070 _________ PKG(S) 0.00 __________

BAGS FILTER - 2 PLY 5 GALLON F

3/PKG. TO BE PORTER CABLE

BATT018 _________ EACH 0.00 __________

BATTERY TERM BRUSED SNAP ON BT

APPROVED EQUAL

BATT019 _________ EACH 9.93 __________

BATTERY SIDE TERMINAL EXTRA LO

LENGTH USED ON SIDE TERMINAL

BBIT010 _________ EACH 0.00 __________

1 1/4 IN SPADE BITS 1/4 " DIA SHAFT

TO BE IRWIN SPEED BAR

BBIT020 _________ EACH 0.00 __________

1 3/8 IN SPADE BIT 1/4" DIAME O BE

IRWIN SPEED BAR OR EQUAL

BBIT030 _________ EACH 3.59 __________

1-1/2" SPADE BIT, 1/4" DIAMETER SHAFT

TO BE IRWIN SPEEDBAR OR APPROVED EQUAL

BCUT010 _________ EACH 0.00 __________

BOLT CUTTER 24" LONG CUPACITY METAL

BCUT020 _________ EACH 0.00 __________

BOLT CUTTER 18 IN MED-HARD MET CAPACITY

BCUT030 _________ EACH 0.00 __________

BOLT CLIPPER 14" IN MED-HARD CAPACITY

BEAR002 _________ EACH 0.41 __________

SLEEVE BEARING, OIL IMPREGNATED BRONZE

MATERIAL INSIDE DIA. = 1/4", OUTSIDE DIA. = 3/8"

1" OVERALL LENGTH, MSC #35374701

MFG. = MADE IN USA #AA307-02

NO SUBSTITUTE

BEAR003 _________ EACH 183.35 __________

UNIVERSAL BEARING CUP INSTALLE 0

DESIGNED FOR INSTALLING WHEE

BEAR004 _________ EACH 31.32 __________

BEARING, A84

BEAR005 _________ EACH 29.64 __________

BEARING, A80

BEAR006 _________ EACH 24.36 __________

BEARING, A65

BEAR007 _________ EACH 15.33 __________

BEARING, #3L250H



7 | P a g e

BENC100 _________ EACH 688.54 __________

WORK BENCH MANUFACTURED WITH A HEAVY

12 GAUGE TOP SURFACE AND

AN INTEGRAL BACK FLANGE. 4 DRAWER PEDESTAL

IS DESIGNED W/ ROLLER DRAWER RAILS FOR SMOOTH

NON-BINDING OPERATION (5'W X 27 1/2"D X 34 1/8"H)

SNAP-ON #EQG245U5 OR APRROVED EQUAL

BGUN001 _________ EACH 15.30 __________

SAFTEY BLOW GUN NPT PAXTON PATTERSON

#20-2106 OR APPROVED EQUAL

BHAM001 _________ EACH 0.00 __________

BALL PEIN HAMMER HEAT TREATED FORGED

HEADS HICKORY

BHAM002 _________ EACH 0.00 __________


HEADS HICKORY

BHAM003 _________ EACH 0.00 __________


HEADS HICKORY

BHAM005 _________ EACH 0.00 __________

BALL PEIN HAMMERS 12 OZ RIDGID EQUAL

BHAM006 _________ EACH 0.00 __________


BHAM007 _________ EACH 0.00 __________


BHAM008 _________ EACH 15.05 __________

BALL PEIN HAMMERS BP32A 5 LB. (SNAP-ON)

BITS001 _________ SET(S) 0.00 __________

BITS DRILL (METAL) 1/16-1/2

BITS018 _________ EACH 0.00 __________

BITS WINDOW/DOOR ZIP - 1/4" B FAST

CUTTING DOOR AND WINDOW

BITS019 _________ EACH 0.62 __________

BIT, HEX SCREWDRIVER - 1/4" X 2 3/4"

LENGTH #1 PHILLIPS

BITS020 _________ EACH 0.62 __________

BIT, HEX SCREWDRIVER - 1/4" X 2 3/4"

LENGTH #2 PHILLIPS

BITS021 _________ EACH 0.32 __________

BIT HEX SQUARE DRIVE POWER BIT 1/4" X 2" X #1

BITS022 _________ EACH 0.32 __________

BIT HEX SQUARE DRIVE POWER BIT 1/4" X 2" X #2



8 | P a g e

BITS023 _________ EACH 0.00 __________

BIT TIPS DRYWALL - 1/4" HEX X

BITS024 _________ PKG(S) 0.00 __________

BIT DRYWALL CUT OUT BIT -

.115 SPIRAL- 10/PKG

BITS025 _________ EACH 0.00 __________

BIT DRYWALL - 3/16" DOWN SPIR

OUT BIT 1/4" SHANK

BITS026 _________ EACH 120.00 __________

115 PC. DRILL BIT (SELF CENTER

BITS027 _________ EACH 16.31 __________

29 FRACTIONAL BITS - 1/16 - 1/2

BY 64TH (NO SUB)

BITS028 _________ EACH 0.00 __________

26 LETTER BITS A-Z NO SUB

BITS029 _________ EACH 0.00 __________

60 NUMBER BITS NO SUB

BITS030 _________ EACH 0.00 __________

1/8 DRILL BITS NO SUB

BITS031 _________ EACH 0.00 __________

BITS DRILL BITS SET 1/8" TO 1

CHUCK(BRODHEAD AND GARRETT)

BITS032 _________ EACH 17.52 __________

STEP DRILL BITS, BRODHEAD GARRETT

ITEM #B618291 OR APPROVED EQUAL

BITS207 _________ EACH 55.88 __________

DRILL BIT SET, HIGH SPEED STEEL #10110

BLAD066 _________ EACH 35.10 __________

BI-METAL BAND SAW BLADE 1" X 35" 8-12 TPI

BLAD067 _________ EACH 38.95 __________

BI-METAL BAND SAW BLADE 12'10" 8-12 TPI

BLAD318 _________ EACH 0.00 __________

COMBINATION SET - 12 INCHES LO ES

GRADUATIONS: 1/8 1/16 1/

BLAD320 _________ PKG(S) 0.00 __________

MILWAUKEE NO 48-42-0140 JIG SA

CUTTING BLADES 5 BLADES

BLAD322 _________ PKG(S) 0.00 __________

MILWAUKEE NO 48-42-0101 JIG SA

CUTTING BLADES 5 BLADES



9 | P a g e

BLAD507 _________ EACH 10.72 __________

BLADE, BANDSAW, METAL CUTTING, 59.5 "

LENGTH, 18 TPI, 3/8" WIDTH, RIDGID PART #03992

BLAD600 _________ EACH 55.95 __________

CLASSIC BANDSAW BLADE 11' 6" X 1" X .035" 5/8V

BLEE001 _________ EACH 0.00 __________

BRAKE BLEEDER 60 LB GUAGE AND

RELEASE VALVE. INCLUDES 2

BLGN010 _________ EACH 0.00 __________

BINKS BLOW GUN OR EQUAL

BLST025 _________ EACH 0.00 __________

40 POUND PRESSURIZED SAND BLAS

33 1/4" X 18 3/4" X 13

BLUE002 _________ CAN(S) 2.73 __________

BLUE LAYOUT FLUID, (12 OZ.) VOLUME

CAPACITY MSC #00264606, MFG. = SPRAYON #S00603

(NO SUBSTITUTE)

BNCH001 _________ EACH 0.00 __________

BENCH WORK BENCH PEDESTAL SNAP EQG24545

OR APPROVED EQUAL

BNGR010 _________ EACH 89.00 __________

BENCH GRINDERS, 6", PAXTON & PATTERSON #3098

OR APPROVED EQUAL

BOLT150 _________ EACH 43.02 __________

24" BOLT CUTTERS - CENTER CUT BLADE FOR SOFT,

MEDIUM AND HARD MATERIALS - ALUMINUM ALLOY HANDLES WITH

RUBBER GRIPS - CUTS UP TO 3/8" FOR SOFT AND MEDIUM

HARD MATERIALS AND 5/16" FOR HARD MATERIALS

BORE001 _________ EACH 0.00 __________

BORING BAR 1/2" HARDENED DOUB &

45 DEGREE 1/2" DIAMETER

BORE002 _________ EACH 0.00 __________

BORING BAR 3/4" HARDENED DOUB &

45 DEGREE 3/4" DIAMETER

BORE003 _________ EACH 0.00 __________

BORING BAR 1" HARDENED DOUBLE

45 DEGREE 1" DIAMETER 16" LO

BORE004 _________ EACH 223.40 __________

BORING BAR, INDEXABLE, 6" CIRCLE

TOOL ENCO #317-3464

BORE005 _________ SET(S) 459.00 __________

OFFSET BORING HEAD SET - (FLYN ONTAINS:

(1) #43B HEAD 2 SHAN



10 | P a g e

BOXX150 _________ EACH 498.42 __________

STANLEY*R 8-DRAWER LOCKING TOOL CHEST –

4 FULL LENGTH

AND 4 HALF-LENGTH DRAWERS -

FRICTION DRAWER SLIDES - BLACK

ENAMEL FINISH - 19" H X 26" W X 12-1/2" D

BRAC011 _________ EACH 4.80 __________

BROOM BRACE, HANDLE THREAD REPLACEMENT,

CAST ALUMINUM FOR 15/16" HANDLE,

DIE CAST ALUMINUM, SLIPS ON & SCREWS TIGHT

ON 15/16" BROOM HANDLES, ELIMINATES BROKEN

HANDLE THREAD, MFG. #4528200,

PAXTON PATTERSON #42-2358 OR APPROVED EQUAL

BRAK023 _________ EACH 5.80 __________

BRAKE DISC PISTON TOOL - DESIG

ROTATE THE PARKING BRAKE

BRAK171 _________ EACH 303.95 __________

BRAKE DRUM GAUGE, DIGITAL, SNAP-ON

#DG530 POINTED ANVILS & 4.25" LONG ARMS

RANGE 6" - 20.65", 150-515MM

GRADUATIONS .005"/.01MM

BRAK212 _________ EACH 5.26 __________

BRAKE SPRING REMOVER S-CAM AIR ING TOOL

BRSH020 _________ EACH 0.00 __________

INJECTOR BRUSH (CUMMINS NH SER ENGINES)

SNAP-ON #BNH1 OR

BRSH030 _________ EACH 0.00 __________

BRUSH FLOOR - 24" LENGTH - 3" 2 1/2" X 1 1/8"

HARDWOOD BLO

BRSH050 _________ EACH 7.20 __________

WHITE WALL OR TIRE BRUSH - PAXTON PATTERSON


BRSR040 _________ EACH 8.84 __________

BRAKE PLIERS FOR EMERGENCY BRA /SPRING COMPRESSES

BRSR050 _________ EACH 10.86 __________

BRAKE PLIERS OPENS THE C-RING

EMERGENCY BRAKE ACTUATION

BRSR060 _________ EACH 7.31 __________

BRAKE PLIERS HOLDS THE C-RING

SLIPPING DURING

BRSR070 _________ EACH 0.00 __________

BRAKE CYLINDER RETAINER REMOVE X

AND J BODY CARS PAXTON

BRSR080 _________ SET(S) 82.85 __________

GENERAL BRAKE SERVICE SET

(5 P ON NO.BTK5 OR EQUAL



11 | P a g e

BRTL010 _________ EACH 0.00 __________

BORING TOOL BARS SIZE 3/8 IN X

BRTL020 _________ EACH 0.00 __________

BORING TOOL BARS SIZE 1/4 IN X

BRTL030 _________ EACH 0.00 __________

BORING TOOL BAR CARBIDE

TIPPED DIA SHANK 5 IN LENGTH

BRTL040 _________ EACH 0.00 __________

BORING TOOL HOLDER-REVERSIBLE

HOLDER DESIGNED TO HOLD

BRTL050 _________ EACH 0.00 __________

BORING TOOL HOLDERS FOR

LATHES SWING 9-10 IN. HOLDER

BRTL060 _________ EACH 0.00 __________

TURNING TOOL HOLDER-MUST

ACCEP CUTTING TOOLS. HOLDER

BRTL070 _________ EACH 0.00 __________

ALORIS ONLY REVERSIBLE BLADE

C TOOL WITH CARBIDE TIP

BRTL080 _________ EACH 0.00 __________

R-8 ADAPTERS-FOR BRIDGEPORT MI

MACHINES-INSIDE TAPER #3

BRUS016 _________ EACH 0.00 __________

BRUSKE FENDER BRUSH

BRUS017 _________ EACH 15.32 __________

BRUSH, SMALL WIRE SNAP-ON #AC5A

OR APPROVED EQUAL

BRUS018 _________ EACH 2.86 __________

BRUSH, REG WIRE - SNAP-ON #AC64

OR APPROVED EQUAL

BRUS321 _________ EACH 0.53 __________

FLAT CHIP BRUSHES 2" POLY WHT BRISTLES

BRUS322 _________ EACH 8.88 __________

FLAT CHIP BRUSHES 3" POLY WHT BRISTLES

BSAW001 _________ EACH 0.00 __________

SAW DRYWALL WALL BOARD 6" BLA

SHARPENED POINT FOR PLUNGE

BURR001 _________ EACH 0.00 __________

GRINDING BURRS 1/4" SHANK 8PC

METAL BOX SNAP-ON #VWB800C

CABI001 _________ EACH 0.00 __________

LYON / TOOL CABINET : STOCK NO

173240 NO SUB



12 | P a g e

CABI023 _________ EACH 0.00 __________

BLAST CABINET WITH RECLAIMER S

#YA437 OR APPROVED EQUAL

CABI026 _________ EACH 23.00 __________

BLAST-IT ALL BEAD BLAST CABINET GLASS SAFETY

TEMPERED WINDOW GLASS 12-1/4" X 20-1/2"

- #23-050

CABI027 _________ PKG(S) 25.50 __________

BLAST-IT ALL CABINET MYLAR GLASS PROTECTOR

12.5" X 10' MYLAR ROLL PART #Y011191-5,

(5 ROLLS / PKG) (NO SUB)

CABI038 _________ EACH 1,994.93 __________

SNAP-ON ROLL CABINET, 13 DRAWER, 40" WIDE X

19 13/16 DEEP X 83 13/16 HIGH, PART #KRA4813DPCM.

MUST BE OF SAME QUALITY, GAUGE,

CONSTRUCTION, AND WARRANTY. 13 DRAWERS

COLOR: BLUE

CABI039 _________ EACH 114.27 __________

MODULAR STEEL DRAWER CABINET - ZE

(11 5/8" X 33 3/4" X 14 3

CABN001 _________ EACH 518.56 __________

FLAMMABLES STORAGE CABINET 65" X 18"D 16GA.

WALLS SNAP-ON

CALI003 _________ EACH 34.99 __________

SPI .100" REV. DIAL CALIPER 0-6" .001", WHITE FACE

CALI005 _________ SET(S) 252.15 __________

UNIVERSAL BRAKE CALIPER TOOL, ASSISTS IN REPLACEMENT

OF BRAKE PADS ON MOST FOUR WHEEL

DISC BRAKE CARS, TOOL & ADAPTORS PISTON BRAKE

PISTON BACK INTO THE CALIPER TO ALLOW CLEARANCE

FOR NEWER, THICKER BRAKE PADS,

SNAP ON #YA8610B OR APPROVED EQUAL

CALP001 _________ EACH 0.00 __________

CALIPER SNAP-ON #CM6524 OR APPROVED EQUAL

CAMM009 _________ EACH 0.00 __________

CAM BUSHING DRIVER MANDREL KIT

NS 1-10 ENGINES CUMMINS SERVIC

CAMM011 _________ SET(S) 0.00 __________

CAM SHAFT AND BUSHING INSTALLE

VER CUMMINS SERVICE TOOL DRIVE

CAMM013 _________ EACH 0.00 __________

CAM BUSHING DRIVER MANDREL KIT

NS NH BIG CAM ENGINES (2.687 C

CAMS001 _________ EACH 132.93 __________

CAMSHAFT BEARING REMOVER/INSER NGE 1.475" TO 2.690" SNAP-ON



13 | P a g e

CANN001 _________ EACH 0.00 __________

HVLP GRAVITY FEED SPRAY GUN CF 20 OZ.

CUP NOZZLE 1.4

CARB001 _________ PKG(S) 0.00 __________

CARBIDE INSERT BID KIT - INSER LOCKING

SCREWS ON SNAP-ON BRAK

CARB002 _________ EACH 6.75 __________

CARBIDE INSERT, C5, INDUSTRY GRADE, TPMM221

TIN COATING, ENCO #422-2769 OR APPROVED EQUAL

CARB003 _________ EACH 5.95 __________

CARBIDE INSERT, WPGT, 605, CG5,

ENCO #317-3485 OR APPROVED EQUAL

CARD020 _________ PKG(S) 26.60 __________

PAYROLL CARDS GRAINGER #6T198 (1000 / PKG)

CART010 _________ EACH 0.00 __________

GO - JO / WALL MOUNT CARTRIDGE

STOCK NO. 98070 NO SUB

CART051 _________ EACH 180.64 __________

CART, METAL ROLL HEAVY GAUGE STEEL SHELVES/FRAME.

SOLID RUBBER 4" X 1 1/2" CASTERS WITH BRAKES

ON CASTERS. WIDTH 36" X DEPTH 24" X HEIGHT 3 1/4"

TRAYS TWO. SNAP-ON #KRS5000

CART053 _________ EACH 0.00 __________

CART HEAVY DUTY TORCH CART 14 PLATE

14 GA TUBE STEEL 10" X

CART150 _________ EACH 595.85 __________

CARTRIDGE PRO-LINK SCAN TOOL C

PART # 209024 FOR CATERPILLAR

CAST007 _________ SET(S) 113.82 __________

CASTERS, EASY ROLLER, HEAVY-DUTY (QTY 4), 1500 LB.

CAPACITY PER UNIT, HYDRAULIC LIFT

MECHANISM WITH LOCK PIN FITS TIRE THREAD

UP TO 12", TSI TRANSPORTATION SUPPLIES #OTC1580

CENT001 _________ EACH 80.00 __________

DROP CENTER TOOL, TO DISMOUNT & MOUNT LOW PROFILE

TIRES, TSI TRANSPORTATION SUPPLIES

#4356851

CHAM009 _________ EACH 72.35 __________

CHAMMIOS 3 1/2 SQ.FT.

CHAM010 _________ EACH 7.07 __________

CHAMOIS - PAXTON PATTERSON - 42-2330 OR APPROVED EQUAL

CHAN001 _________ EACH 0.00 __________

3/8" X 1" X 12 FT CHAIN BOUB TOW #10



14 | P a g e

CHAR010 _________ EACH 0.00 __________

CHARGING AND TEST MANIFOLD WIT AND QUICK CONNECT COUPERS

CHAR019 _________ EACH 668.85 __________

CHARGER, BATTERY, STANDARD AUTOMOTIVE, DEEP CYCLE,

AGM & GEL BATTERIES, EACH REQUIRE

A DIFFERENT CHARGING CYCLE, 300 AMP STARTING

POWER FLASH PROGRAMMING, POWER SUPPLY

MAINTAINS CONSISTENT OEM SPECIFIED VOLTAGE,

SNAP ON #EEC500 OR APPROVED EQUAL

CHAR050 _________ EACH 0.00 __________

CHARGER PARALLEL CHARGER - CHA TESTS & MAINTAINS UP TO 18

CHAS001 _________ EACH 56.95 __________

UNIVERSAL OUTSIDE THREAD CHASE 2 OR APPROVED EQUAL

CHAS006 _________ EACH 29.22 __________

CIRCUIT CHASER (FOR SEMI-TRAIL ON

#YA3179A TESTS SEMI-TRAILER

CHASM009 _________ EACH 0.00 __________

CHAMMOIS 3 1/2 SQ. FT. NO SUB

CHCK001 _________ EACH 1.46 __________

AIR CHUCK F - PAXTON PATTERSON - 18-6638

OR APPROVED EQUAL

CHCK003 _________ EACH 109.19 __________

JACOBS BALL BEARING CHUCK 0-1/2 14N 3JT

CHSL010 _________ EACH 0.00 __________

AIR CHISEL TIPS STRAIGHT

CHSL020 _________ EACH 0.00 __________

AIR CHISEL TIP SHEET METAL RIP

CHSL030 _________ EACH 0.00 __________

HOLLOW CHISEL 1/4" X 4 1/4" 1 7/8"

DEPTH CAPACITY

CHSL040 _________ EACH 0.00 __________

HOLLOW CHISEL 3/8" X 4 1/4" 1 7/8"

DEPTH CAPACITY

CHSL050 _________ EACH 0.00 __________

HOLLOW CHISEL 1/2" X 4 1/4" X 1 7/8"

DEPTH CAPACITY

CHSL060 _________ EACH 0.00 __________

HOLLOW CHISEL BIT 1/4" DIAMET

CHUK003 _________ EACH 63.90 __________

5C COLLET BLOCK CHUCK SET - 1

STANDARD CLOSER 1 HEX W/ STAN

CHUK005 _________ EACH 180.00 __________

UNIVERSAL 3-JAW CHUCK -3-JAW S ING SCROLL CHUCK DRICET MOUNT



15 | P a g e

CHUK006 _________ EACH 180.00 __________

UNIVERSAL 3-JAW CHUCK - 3 JAW RING

SCROLL CHUCK DIRECT MOUN

CKEY090 _________ EACH 56.21 __________

CHUCK ARBORS, SHANK TAPER R-8 BRIDGEPORT

JACOBS TAPER 3JT

CLIP008 _________ EACH 4.97 __________

CLIP-ON AIR CHUCK SNAP-ON #YA1 OR APPROVED EQUAL

CLIP017 _________ EACH 2.26 __________

CLIPS & BAR FOR SOCKETS (14), 3/8" DRIVE CLIPS ON A 1

3-3/8" RAIL, SNAP ON #A267A

OR APPROVED EQUAL

CLIP018 _________ EACH 2.65 __________

CLIPS & BAR FOR SOCKETS (15), 1/2" DRIVE

CLIPS ON A 16-3/4" RAIL, SNAP ON #A270A

OR APPROVED EQUAL

CLMP004 _________ EACH 0.00 __________

ALTMAN HEAVY DUTY PRO CLAMP (A

CLMP005 _________ EACH 0.00 __________

ALTMAN 0 CLAMP (OC-1-5) FITS 1 TRUSS OR BARS

CLMP010 _________ EACH 24.04 __________

C-CLAMPS 4" JORGENSEN OR APPROVED EQUAL

CLMP019 _________ EACH 0.00 __________

IRWIN*R QUICK-GRIP*T 6" C-CLAM P –

CASE HARDENED STEEL - FOR

USE UP TO 1,200 LB LOAD

CLMP020 _________ EACH 6.02 __________

C-CLAMPS 6" JORGENSEN OR EQUA

CLMP021 _________ EACH 0.00 __________

C CLAMP (3/8")

CLMP022 _________ EACH 0.00 __________

C CLAMP (1/2")

CLMP023 _________ EACH 0.00 __________

C CLAMP (3/4")

CLMP024 _________ EACH 0.00 __________

ONE HOLE CLAMPS - BLK MALLEABL FOR

3/8" THREADED ROD (1/2")

CLMP025 _________ EACH 0.00 __________


3/8" THREADED ROD (3/4")

CLMP026 _________ EACH 0.00 __________


3/8" THREADED ROD (1")



16 | P a g e

CLMP027 _________ BOX(S) 0.00 __________

STAINLESS STEEL HOSE CLAMP (ID EAL)

NO SUBS. (1/8") BOX/10

CLMP028 _________ BOX(S) 0.00 __________

STAINLESS STEEL HOSE CLAMP (ID NO SUBS.

(1/4") (BOX OF 10)

CLMP029 _________ BOX(S) 11.80 __________

STAINLESS STEEL HOSE CLAMP (IDEAL)

NO SUBS (5/16")

BOX OF 10

CLMP030 _________ EACH 0.00 __________

C-CLAMP 8" JORGENSEN OR EQUAL

CLMP031 _________ BOX(S) 11.80 __________

STAINLESS STEEL HOSE CLAMP

(IDEAL) NO SUBS. (3/8")

BOX OF 10

CLMP032 _________ BOX(S) 12.00 __________


(IDEAL) NO SUBS. (7/8")

BOX OF 10

CLMP033 _________ BOX(S) 12.00 __________


(IDEAL) NO SUBS (1 1/4")

BOX OF 10

CLMP034 _________ BOX(S) 12.60 __________


IDEAL - NO SUBS. (1 3/4")

BOX OF 10

CLMP040 _________ EACH 0.00 __________

BAR CLAMPS HARGRAVE ORJORGENSE

OR EQUAL 24"LONG

CLMP050 _________ EACH 0.00 __________

BAR CLAMPS30L HARGRAVE JORGENS EQUAL

CLMP060 _________ EACH 11.02 __________

BAR CLAMPS HARGRAVE JORGENSEN

OR EQUAL

CLMP070 _________ EACH 29.79 __________


OR EQUAL

CLMP080 _________ EACH 0.00 __________


OR EQUAL

CLMP090 _________ EACH 0.00 __________

BAR CLAMPS HARGRAVE JORGENSEN OR EQUAL



17 | P a g e

CLMP100 _________ EACH 0.00 __________

HAND SCREW ADJUSTABLE JORGENSE

OR EQUAL

CLMP110 _________ EACH 0.00 __________


OR EQUAL

CLMP120 _________ EACH 0.00 __________

HAND SCREWS ADJUSTABLE JORGENS 210

OR EQUAL

CLMP130 _________ EACH 0.00 __________

HAND SCREWS ADJUSTABLE JORGENS

OR EQUAL

CLMP140 _________ EACH 0.00 __________


OR EQUAL

CLMP150 _________ EACH 0.00 __________


OR EQUAL

CLMP170 _________ EACH 0.00 __________

SPRING CLAMPS PONY NO 3201 HT-

OPENING OR EQUAL

CLMP180 _________ EACH 0.00 __________


OPENING OR EQUAL

CLMP190 _________ EACH 0.00 __________


OPENING OR EQUAL

CLMP200 _________ EACH 0.00 __________


OPENING OR EQUAL

CLMP210 _________ EACH 0.00 __________

JORGENSEN LIGHT DUTY SEEL BAR

MFR#3724 OR EQUAL

CLMP220 _________ EACH 10.15 __________

JORGENSEN LIGHT DUTY STEEL BAR 12"

OPENING MFR. #3712

CLTL010 _________ EACH 0.00 __________

PILOT BEARING PULLER PILOT BEA REMOVAL

OF FLYWHEEL CARS

CNCL001 _________ EACH 57.70 __________

CONSTRUCTION CALCULATOR - CONS MASTER

IV MODEL 4045

CNTR007 _________ EACH 0.00 __________

6 DRAWER PROJECT CENTER APPROX U. IN. STORAGE W/ PANELED BULK



18 | P a g e

COCK001 _________ EACH 0.00 __________

WATER BIBB COCK FOR ATTACHING SERVICE

HOSE 1/4" NPT FEMALE

COMP014 _________ SET(S) 759.78 __________

STRUT COMPRESSOR, MCPHEARSON, WALL MOUNT &

BENCHMOUNT ADAPTOR BRANICK #7400

& BENCHMOUNT ADAPTOR #741,

VENDOR = TSI TRANSPORTATION SUPPLIES INC.

COMP019 _________ EACH 122.97 __________

COMPRESSION GUAGE (SNAP-ON #MT33 OR

APPROVED EQUAL)

COMP020 _________ EACH 439.00 __________

AIR COMPRESSOR-2HP-3450RPM IND MOTOR-2

GAL SIDE STACK TANKS

COMP021 _________ EACH 0.00 __________

COMPRESSION GUAGE ADAPTED NHV M3540 B

OR APPROVED EQUAL

COMP022 _________ EACH 0.00 __________

COMPRESSION GUAGE ADAPTOR IH-4

APPROVED EQUAL

COMP028 _________ EACH 17.15 __________

RING COMPRESSOR SNAP-ON #RC15A 1/2"

TO 7" CAPACITY 6 1/2"

COMP030 _________ EACH 0.00 __________

AIR COMPRESSOR - 2 HP 4 GAL. D IVE W/

NO BELTS LARGE INTERNA

COMP057 _________ EACH 0.00 __________

VALVE SPRING COMPRESSOR FOR HD GINES

AIR OPERATED COMES WITH

COOL020 _________ EACH 129.00 __________

COOLANT - OAK KOOL 632-AF (5 G NER)

COOL090 _________ GAL 0.00 __________

MACHINE TOOL COOLANT SYN COOL

SYNTHETIC COOLANT

COOL095 _________ EACH 94.99 __________

COOLANT, (5 GAL. CONTAINER), MUST BE TRIMSOL

E206, PRODUCED BY MASTER CHEMICAL, 5 GALLON

CONTAINER (MSC #01790781 OR APPROVED EQUAL)

COOL297 _________ EACH 118.00 __________

COOLING SYSTEM ANALYZER OTC OR

JUSTABLE RELIEF VALVE ALLOWS S

COUP002 _________ EACH 2.00 __________

QUICK COUPLERS, ADAPTERS, MALE,

AHC23M (NO SUBSTITUTE)



19 | P a g e

COUP003 _________ EACH 2.00 __________

COUPLER, AIR HOSE SNAP ON #AHC23

OR APPROVED EQUAL

COUP004 _________ EACH 1.79 __________

COUPLER, AIR HOSE MALE FITTING 3/8"

SNAP-ON #AHC28M

OR APPROVED EQUAL

COUP005 _________ EACH 2.05 __________

COUPLER, AIR HOSE FEMALE 3/8"

SNAP-ON #AHC28F

OR APPROVED EQUAL

COUP038 _________ EACH 7.95 __________

COUPLING FORD A/C AND FUEL LIN

LOCK COUPLING TOOL NECESSARY

COUP045 _________ EACH 0.00 __________

COUPLER AIR LINE SNAP-ON

#AHC2 APPROVED EQUAL

COUP046 _________ EACH 1.37 __________

COUPLER, AIR LINE ADAPTOR

SNAP-ON #AHC22M

OR APPROVED EQUAL

COUP060 _________ EACH 0.00 __________

COUPLER KWIK CHANGE - BRASS FE

3/8" NPT M STYLE-AHC 23

CREE001 _________ EACH 86.77 __________

SEAT CREEPERS 1/2" PLYWOOD BA WITH

COMFORTABLE 2 1/4" THICK

CREE002 _________ EACH 187.36 __________

PADDED LOW-PROFILE CREEPER 16 GA.

3/4" SQUARE STEEL

STOCK FRAME, 6 CASTERS, 17" WIDE X 40' LONG,

SNAP-ON #JC23CBL (NO SUBS.)

CTSK002 _________ EACH 0.00 __________

COUNTERSINK90DEGREE 1/2" SING MSC

02452324 OR SATCO SUPPLY

CTSK003 _________ EACH 11.19 __________

COUNTERSINK, 90 DEGREES, 3/4" SINGLE FLUTE,

MSC #02452480, SATCO SUPPLY

#BL52-RF1290 OR APPROVED EQUAL

CTSK004 _________ EACH 0.00 __________

COUNTERSINK 90 DEGREES 1 1/4 S

FLUTE MSC 02452746

CUPP001 _________ EACH 0.00 __________

1 SIPHON CUP NO SUB



20 | P a g e

CUTT004 _________ EACH 0.00 __________

CUTTER SMALL TUBING SNAP ON TC

APPROVED EQUAL

CUTT015 _________ EACH 0.00 __________

BOLT CUTTER

CUTT025 _________ EACH 0.00 __________

CUTTERS TUBING - 5/8"-2 1/8" TO BE

RIGID MODEL #20 OR

CUTT030 _________ EACH 71.99 __________

CUTOUT TOOL KIT DRYWALL - 2800 3.4

MPS INCLUDES 1/4" AND

CUTT031 _________ EACH 0.00 __________

AUTOMATICALLY ADJUSTING WIRE CUTTERS STRIPPERS

CUTT035 _________ EACH 0.00 __________

CUTTER DRYWALL CIRLE - CUTS UP DIA.

CUTT071 _________ EACH 10.60 __________

PUTMAN CENTER CUTTING, 4 FLUTE, HSS END MILL,

(3/4" X 3/4" X 1-5/8"),

MSC #81846487, MUST BE PUTNAM #94069

(NO SUBSTITUTE)

CUTT072 _________ EACH 9.68 __________


(5/8" X 5/8" X 1-5/8"),

MSC #81846404, MUST BE PUTNAM #94067

(NO SUBSTITUTE)

CUTT073 _________ EACH 7.93 __________


(1/2" X 1/2" X 1-1/4"),

MSC#81846321, MUST BE PUTNAM #94066

(NO SUBSTITUTE)

CUTT074 _________ EACH 20.30 __________

PUTMAN CENTER CUTTING, 4 FLUTE, COBALT M-42 END MILL,

(3/8" X 3/8" X 1" X 2-3/4"),

MSC#74718693, MUST BE PUTNAM #94791,

(NO SUBSTITUTE)

CUTT075 _________ EACH 51.55 __________

PUTMAN CENTER CUTTING, 4 FLUTE,

COBALT M-42 END MILL, 1/4 X 3/8 X 5/8


NO SUBSTITUTE

CUTT076 _________ EACH 25.65 __________


HSS END MILL, 1/8 X 3/8 X 3/8


NO SUBSTITUTE



21 | P a g e

CUTT077 _________ EACH 25.65 __________


HSS END MILL, 3/16 X 3/8 X 1/2

MSC #81846123, MUST BE PUTNAM #94062,

NO SUBSTITUTE

CUTT078 _________ EACH 71.75 __________

DRILL STORAGE - 3 DRAWERS, METAL

MSC #01691112, MFG = HUOT #13000

(NO SUBSTITUTE),

DRILL SIZE RANGE: (1/16-1/2" X 64THS)

CUTT079 _________ EACH 71.75 __________

DRILL STORAGE - 3 DRAWERS, METAL

MSC #01691138, MFG = HUOT #13050

(NO SUBSTITUTE)

DRILL SIZE RANGE: A-Z

CUTT082 _________ EACH 91.22 __________

DRILL STORAGE - 5 DRAWERS, METAL MSC

#01691120, MFG = HUOT #13025

(NO SUBSTITUTE)

DRILL SIZE RANGE: 1-60

CUTT083 _________ SET(S) 106.38 __________

DEBURRING & CHAMFERING SET, 7-PIECE SET

6 FLUTE CHATTERLESS COUNTERSINK, HSS

82 DEGREE ANGLE, PLASTIC CASE,

MSC #01056993,

MFG. = M.A. FORD #79000002

(NO SUBSTITUTE)

CUTT084 _________ SET(S) 106.38 __________

DEBURRING & CHAMFERING SET, 7-PIECE SET

6 FLUTE CHATTERLESS COUNTERSINK, HSS

90 DEGREE ANGLE, PLASTIC CASE,

MSC #01057991,

MFG. = M.A. FORD #79000003,

(NO SUBSTITUTE)

CUTT086 _________ EACH 12.40 __________

HSS CHUCKING REAMER, STRAIGHT SHANK,

3/8", FLUTE LENGTH = 1-3/4",

MSC #63751242,

MFG = CLEVELAND #C25807,

(NO SUBSTITUTE)

CUTT087 _________ EACH 26.14 __________

HSS CHUCKING REAMER, STRAIGHT SHANK,

3/4", FLUTE LENGTH = 2-1/2",

MSC #63751481,

MFG = CLEVELAND #C26615,

(NO SUBSTITUTE)



22 | P a g e

CUTT088 _________ EACH 44.72 __________

HSS COUNTERBORES SOCKET HEAD SCREW TYPE

3 FLUTE, SCREW SIZE = 3/8"

MSC #81852386

MFG = CLEVELAND #C91714 (NO SUBSTITUTE)

PILOT HOLE DIA. = 13/32

CUTTER DIA. = 19/32

SHANK DIA. = 1/2"

CUTT089 _________ EACH 2.37 __________

CARBON STEEL COUNTERBORE PILOT,

PILOT HOLE DIA. = 3/8", SHANK DIA. = 1/4"

MSC #78905247,

MFG. = MADE IN USA #433-57,

(NO SUBSTITUTE)

CUTT091 _________ EACH 1.05 __________

CARBON STEEL COUNTERBORE PILOT,

PILOT HOLE DIA. = 13/32", SHANK DIA. = 3/16"

MSC #08904260,

MFG. = VALUE IMPORT,

(NO SUBSTITUTE)

CUTT092 _________ EACH 226.40 __________

INDEXABLE MILLING TOOL, 1.970" CUTTING DIA.

6.0200" OVERALL LENGTH, OFEX 05T305 INSERT TYPE

RIGHT HAND ROTATION, ROUND SHANK TYPE,

4 INSERTS,

MSC #04341707

MFG. = SECO #87687, NO SUBSTITUTE

CUTT093 _________ EACH 3.61 __________

INDEXABLE LOCKING SCREW,

USE WITH MILLING CUTTERS,

MSC #76390830,

MFG. = SECO #16717,

(NO SUBSTITUTE)

CUTT302 _________ EACH 41.75 __________

HANITA M42 4FL CC REG SEM 1205

3/4 X 3/4 X 1-5/8

CUTT303 _________ EACH 19.67 __________

HANITA M42 CC STUB SEM 1245

5/8 X 5/8 X 5/8 4FL

CUTT304 _________ EACH 13.13 __________

HANITA M42 CC LONG SEM 1215

1/2 X 1/2 X 2 4FL

CUTT305 _________ EACH 11.23 __________

HANITA M42 4FL CC REG SEM 1205

3/8 X 3/8 X 3/4

CUTT306 _________ EACH 7.56 __________

HANITA M42 CC REG SEM 1205

1/4 X 3/8 X 5/8 4FL



23 | P a g e

CUTT307 _________ EACH 7.56 __________

HANITA M42 CC REG SEM 1205

3/16 X 3/8 X 1/2 4FL

CUTT308 _________ EACH 21.95 __________

PUTNAM FINE ROUGHING EM

3/4 X 3/4 X 1-5/8 4FL

CUTT309 _________ EACH 125.69 __________

ISCAR CUT OFF TOOL SGTFR 19-4

CUTT310 _________ EACH 51.94 __________

S/CARB RET RING GROOVE TL

1/2 X 0.156/1-1/2 X 0.158

CUTT311 _________ EACH 19.90 __________

STEEL BORING BAR HOLDER 1/2 X 3/4

DBAR001 _________ EACH 0.00 __________

DIGGING BAR 6' WITH WEDGE

DBIT001 _________ EACH 0.00 __________

1/16 IN DRILL BIT HIGH SPEED S SHANK

DBIT002 _________ EACH 0.00 __________

5/64 IN DRILL BIT HIGH SPEED S SHANK

DBIT003 _________ EACH 0.26 __________

3/32 IN DIAMETER DRILL BITS HI STRAIGHT SHANKS

DBIT004 _________ EACH 0.26 __________

7/64 IN DRILL BITS HIGH SPEEDS SHANKS

DBIT005 _________ EACH 0.51 __________

1/8" DRILL BITS HIGH SPEED, STRAIGHT SHANK

DBIT006 _________ EACH 0.00 __________

9/64 INDRILL BITSHIGH SPEED ST SHANK

DBIT007 _________ EACH 0.57 __________

5/32" DRILL BITS HIGH SPEED STRAIGHT SHANK

DBIT008 _________ EACH 0.00 __________

11/64 INDRILL BITSHIGH SPEED S SHANK

DBIT009 _________ EACH 0.67 __________


DBIT010 _________ EACH 0.00 __________

13/64 IN DRILL BITSHIGH SPEED SHANKS

DBIT011 _________ EACH 0.00 __________

7/32 INDRILL BITSHIGH SPEED ST SHANK

DBIT012 _________ EACH 0.00 __________

15/64 INDRILL BITS HIGH SPEED SHANK



24 | P a g e

DBIT013 _________ EACH 0.95 __________


DBIT014 _________ EACH 0.00 __________


DBIT015 _________ EACH 0.00 __________

9/32 IN DRILL BITSHIGH SPEED S SHANK

DBIT016 _________ EACH 0.00 __________


DBIT017 _________ EACH 1.35 __________


DBIT018 _________ EACH 0.00 __________


DBIT019 _________ EACH 0.00 __________

11/32 INDRILL BITSHIGH SPEEDST SHANK

DBIT020 _________ EACH 0.00 __________

23/64 IN DRILL BITS HIGH SPEED SHANK

DBIT021 _________ EACH 2.14 __________


DBIT022 _________ EACH 0.00 __________


DBIT023 _________ EACH 0.00 __________


DBIT024 _________ EACH 0.00 __________


DBIT025 _________ EACH 0.00 __________


DBIT026 _________ EACH 0.00 __________


DBIT027 _________ EACH 0.00 __________


DBIT028 _________ EACH 0.00 __________


DBIT029 _________ EACH 0.00 __________

1/2 IN DRILL BITS HIGH SPEED S SHANK

DBIT030 _________ LOT(S) 15.39 __________

HIGH SPEED STEEL DRILL BITS 3 EACH OF THE

FOLLOWING SIZES: 7/64", 1/8", 9/64",

5/32", 11/64", 3/16", 13/64", 7/32"

DBIT032 _________ EACH 0.00 __________

HIGH SPEED DRILL BIT STRAIGHT 118 DEGREE POINT FULL



25 | P a g e

DBIT033 _________ EACH 0.00 __________

HIGH SPEED DRILL BIT STRAIGHT

118 DEGREE POINT FULL

DBIT034 _________ EACH 0.00 __________

HIGH SPEED DRILL BIT STRAIGHT

118 DEGREE POINT FULL

DBIT040 _________ LOT(S) 0.00 __________

STRAIGHT SHANK TWIST DRILLS JO

LENGTH 118 DEGREES POINT

DBIT050 _________ LOT(S) 0.00 __________


LENGTH 118 DEGREES

DBIT060 _________ LOT(S) 0.00 __________


LENGTH HIGH SPEED STEEL

DBIT061 _________ LOT(S) 0.00 __________

SILVER AND DEMING DRILLS 3/4"

H.S.S. CONSISTING OF ONE

DBIT062 _________ EACH 0.00 __________

1/2" SHANK SILVER AND DEMING

H.S.S. 1 1/16 TO 1 1/2

DBIT070 _________ LOT(S) 0.00 __________

STRAIGHT SHANK TWIST DRILLS

JO LENGTH HIGH SPEED STEEL

DBIT080 _________ LOT(S) 0.00 __________

JOBBER LENGTH DRILLS-AMERICAN

-SIZES 37-60-RUTLAND OR

DBIT090 _________ LOT(S) 0.00 __________


-SIZES 19-36-RUTLAND OR

DBIT100 _________ EACH 0.00 __________


SIZES-SIZE 1/8" RUTLAND

DBIT110 _________ EACH 0.00 __________

3-IN-ONE DRILL SET STRAIGHT SH

JOBBER LENGTH HIGH SPEED

DBIT120 _________ EACH 0.00 __________

DRILL SET HSS WITH 1/2" SHANK

17/32 THRU 1" SET INCLUDE

DBIT130 _________ EACH 0.00 __________

TAP & DRILL STANDS 65 HOLES FO

2 THROUGH 1/2" NC ALSO NF

DBIT140 _________ EACH 0.00 __________

DRILL STAND 1/16 IN TO 1/2 IN



26 | P a g e

DBIT150 _________ EACH 0.00 __________

HANSON DRILLS FOR PLEXIGLASS 1 DIAMETER

DBIT155 _________ EACH 0.00 __________

HANSON DRILLS FOR PLEXIGLASS 1 DIAMETER

DBIT160 _________ EACH 0.00 __________

DRILL BIT DOUBLE ENDED 1/8" S #DBD1/8 OR EQUAL

DBIT170 _________ EACH 0.00 __________

1/8 SHEET METAL DRILL BIT

DBIT172 _________ EACH 0.00 __________


DBIT174 _________ EACH 0.00 __________


DBIT175 _________ EACH 0.00 __________


DBIT176 _________ EACH 0.00 __________


DBIT177 _________ EACH 0.00 __________


DBIT178 _________ EACH 0.00 __________

3/8 SHEET METAL DRILL BIT W/1

DBIT179 _________ EACH 0.00 __________

1/2 SHEET METAL DRILL BIT W 1/

DBIT180 _________ EACH 0.00 __________

DRILL BIT-HSS-#38

DBIT190 _________ EACH 0.00 __________

DRILL BIT-HSS-#40

DBIT191 _________ EACH 0.00 __________

DRILL BIT-HSS-#41

DBIT193 _________ EACH 0.00 __________

DRILL BIT-HSS-#43

DBIT195 _________ EACH 0.00 __________

DRILL BIT-HSS-#45

DBIT197 _________ EACH 0.00 __________

DRILL BIT-HSS-#47

DBIT200 _________ EACH 0.00 __________

DRILL BIT-HSS-#50

DBIT203 _________ EACH 0.00 __________

DRILL BIT-HSS-#53



27 | P a g e

DBIT204 _________ EACH 0.00 __________

DRILL BIT-HSS-#54

DBIT209 _________ EACH 0.00 __________

DRILL BIT-HSS-#59

DBIT220 _________ EACH 0.00 __________

DRILL SET S-60 NUMBERED DRILL

COMPLETE WITH INDEX

DBIT250 _________ EACH 2.00 __________

DRYWALL BIT, #2 PHILLIPS TIP, 1",


DBIT251 _________ EACH 0.00 __________

DRIVE BIT SQUARE #2 ROBERTSON

MILWAUKEE # 48-32-1210

DBIT252 _________ EACH 0.00 __________

LOCATOR ASSEMBLY MILWAUKEE # 4

DBIT253 _________ EACH 4.98 __________

MAGNETIC BIT HOLDER, MILWAUKEE

#48-32-3065

DBIT255 _________ EACH 0.00 __________

SLOTTED SCREW INSERT BIT 1" L GF - 8R


DBIT256 _________ EACH 0.21 __________

SLOTTED SCREW INSERT BIT 1" L 3F - 4R


DBIT257 _________ EACH 0.00 __________

SLOTTED SCREW INSERT BIT 1" L 8F-10R


DBIT258 _________ EACH 0.00 __________

SLOTTED SCREW INSERT BIT 1" L 10F –

12 R MILWAUKEE #48-

DBRD010 _________ EACH 0.00 __________

BRAD POINT BIT 1/4" DIA 3/8"

DBRD020 _________ EACH 0.00 __________

BRAD POINT BITS 3/8" DRILL CH CITY

MACHINE #300-3/8 OR

DBRD101 _________ EACH 0.00 __________

BRAD POINT BIT 1/4" DIA 3/8"

DEAD001 _________ EACH 17.95 __________

DEAD CENTER, TAPER SIZE 1, MORSE CARBIDE TIPPED,


DEBR001 _________ EACH 0.00 __________

DEBURRING TOOL TO BE RIGID MO OR APPROVED EQUAL



28 | P a g e

DEBU001 _________ EACH 0.00 __________

STANDARD DEBURRING KIT FN50-5 OR EQUAL

DEBU002 _________ EACH 0.75 __________

STANDARD DEBURRING BLADES SATC OR EQUAL

DEBU003 _________ EACH 6.35 __________

DEBURRING SET SHAVIV BRAND INC

MODEL B BLADE HOLDER PLASTIC

DIAP020 _________ EACH 0.00 __________

AIR BRAKE DIAPHRAM TYPE 30 PAR

DIEH001 _________ EACH 0.00 __________

DIE HEAD 1/2" (RIDGID) MODEL (NO SUBS.)

DIEH002 _________ EACH 0.00 __________

DIE HEAD 3/4" (RIDGID) MODEL (NO SUBS.)

DIEH003 _________ EACH 0.00 __________

DIE HEAD 1" (RIDGID) MODEL #7 (NO SUBS.)

DIEH004 _________ EACH 0.00 __________

CARBON STEEL TAP & DIE SET

(MA #4X575 OR APPROVED EQUAL

DISC005 _________ EACH 0.00 __________

ABRASIVE DISC SHAPER AND TRIMM

DISC012 _________ BOX(S) 0.00 __________

DISC GRINDING 24 GRIT 5" X 7/ BOX

DISC162 _________ BOX(S) 25.00 __________

DISCS, SURFACE CONDITITONING, 2" MEDIUM,

MAROON ROLOC SC DISC, 3M BRAND,

SCOTCH BRITE, GRADE 50, 25 / BOX,

SNAP ON #MMM07481RWD OR APPROVED EQUAL

DISC163 _________ BOX(S) 28.00 __________

DISCS, SURFACE CONDITITONING, 2" COARSE BROWN,

GRADE 36, 3M BRAND, SCOTCH BRITE,

25 / BOX, SNAP ON #MMMO7480RWD

OR APPROVED EQUAL

DIVD001 _________ EACH 0.00 __________

12 IN DIVIDERS WING PEXTO OR E

DIVD010 _________ EACH 0.00 __________

10 IN DIVIDERS WING PEXTO OR E

DIVD020 _________ EACH 0.00 __________

8 IN DIVIDERS WING PEXTO OR EQ

DIVD030 _________ EACH 0.00 __________

DIVIDERS STEEL FLAT STOCK BOW 8 IN SIZE-STARRETT

DIVD040 _________ EACH 0.00 __________

NO. 18 MAX. DIA. CIRCLE 36 IN. IN. DIVIDERS MALCO OR



29 | P a g e

DIVD050 _________ EACH 0.00 __________

NO. 24 MAX DIA. CIRCLE 48 IN. 13 1/2 IN DIVIDERS MALCO

DIVD060 _________ PAIR(S) 0.00 __________

RP2 RELACEMENT POINTS DIVIDER OR EQUAL

DIVD070 _________ EACH 0.00 __________

PENCIL COMPASS AND SCRIBER OR

DIVD100 _________ EACH 135.84 __________

STARRETT SPRING DIVIDERS 277-3 3" SPRING TYPE

POLISHED MATERIAL FINISH, GROUND STEEL

DIWR010 _________ EACH 0.00 __________

DISTRIBUTOR WRENCH 1/2 SIZE SN NO.S6113 OR EQUAL

DIWR011 _________ EACH 0.00 __________

DISTRIBUTOR WRENCH 10MM SIZE S NO.S6002B OR EQUAL

DIWR012 _________ EACH 0.00 __________

DISTRIBUTOR WRENCH 13MM SIZE S NO.FLXM13 OR EQUAL

DIWR013 _________ EACH 0.00 __________

DISTRIBUTOR WRENCH 13MM SIZE S NO. S6142 OR EQUAL

DIWR014 _________ EACH 0.00 __________

DISTRIBUTOR WRENCH 13MM SIZE S NO. S6173 OR EQUAL

DIWR015 _________ EACH 0.00 __________

DISTRIBUTOR WRENCH 9/16 SIZE S #S9838 OR EQUAL

DIWR016 _________ EACH 0.00 __________

DISTRIBUTOR WRENCH 13MM SIZE S NO.65177 OR EQUAL

DIWR017 _________ EACH 0.00 __________

DISTRIBUTOR WRENCH 15MM SIZE S NO S6134 OR EQUAL

DIWR020 _________ EACH 0.00 __________

DISTRIBUTOR WRENCH 1/2 SIZE SN NO.S8564B OR EQUAL

DIWR030 _________ EACH 0.00 __________

DISTRITBUTOR WRENCH 1/2 SIZE S NO.S9482A OR EQUAL

DIWR040 _________ EACH 0.00 __________

DISTRIBUTOR WRENCH 9/16 SIZE S NO.S6140 OR EQUAL

DIWR050 _________ EACH 0.00 __________

DISTRIBUTOR WRENCH 9/16 SIZE S NO.S8176 OR EQUAL

DIWR060 _________ EACH 0.00 __________


DIWR070 _________ EACH 0.00 __________

DISTRIBUTOR WRENCH9/16 SIZE SN #S9622 OR EQUAL

DIWR080 _________ EACH 0.00 __________




30 | P a g e

DIWR090 _________ EACH 0.00 __________

DISTRIBUTOR WRENCH 9/16 SIZE S #S9832C OR EQUAL

DLC001 _________ EACH 0.00 __________

DIGIMATIC CALIPUS SIWITCHABLE METERIC WITH RESOLUTION

DLCL001 _________ EACH 13.50 __________

DIAL CALIPER 6 INCH BAR GRADUA IN CASE RANGE O-6" NO

DLCL010 _________ EACH 32.60 __________

MITUTOYD DIAL CALIPERS JEWELED BEARINGS

100 GRADUATIONS PER REV

4-WAY MEASUREMENT MITUTOYO ONLY RANGE

12 ONLY RANGE 12 INCHES GRAD. .001 APPROX. JAW

DLCL020 _________ EACH 4.10 __________

OUTSIDE CALIPER6 INCH. STARRET 'YANKEE' OR EQUAL

DLCL030 _________ EACH 0.00 __________

OUTSIDE CALIPER YANKEE SPRING SIZE SPRING NUT NO 79

DLCL040 _________ EACH 3.05 __________

INSIDE CALIPER YANKEE SPRING T SIZE SPRING NUT NO. 73

DLCL050 _________ EACH 0.00 __________

HERMAPHRODITE CALIPERS-6 IN FI STYLE (STARRETT 241 OR

DLCL060 _________ EACH 0.00 __________

INSIDE CALIPERS 8IN MFR. NO 73 OR EQUAL

DLCL070 _________ EACH 0.00 __________

OUTSIDE CALIPERS 8IN MFR. NO 7 OR EQUAL

DLID001 _________ EACH 0.00 __________

LAST WARD DIAL TEST INDICATORS GRADUATION .001 DIAL

DLID002 _________ EACH 0.00 __________

LAST WARD-DIAL TEST INDICATORS INDICATOR WITH SHADED

DLID003 _________ EACH 0.00 __________

UNIVERSAL DIAL TEST INDICATOR CATALOG NO 196 BIL.S.

DLID004 _________ EACH 0.00 __________

UPRIGHT BASE POST 3/8" DIA X OVERALL LENGTH NO. 657G

DLID005 _________ EACH 0.00 __________

MAGNETIC BASE INDICATOR HOLDER 657AA STARRETT OR EQUAL

DLID006 _________ EACH 15.00 __________

TELESCOPING GUAGES SET OF THRE A B C IN RED PLASTIC

DLIG010 _________ EACH 10.31 __________

HEAVY DUTY DROP LIGHT

DRBR010 _________ EACH 20.32 __________

DRAW BAR FOR BRIDGEPORT VARIAB

MILLING MACHINES O.A.L.



31 | P a g e

DRES001 _________ EACH 0.00 __________

DRESSERGLIDE WHEEL FOR PEDESTA MSC

00127332 OR SATCO MN60-

DRIL001 _________ EACH 145.30 __________

MILWAUKEE 1/2" DRILL, REVERSIBLE

DRIL002 _________ EACH 0.00 __________

12 VOLT HIGH TORK DRIVER DRILL

DRIL003 _________ EACH 0.00 __________

HILTEE MODEL TE 15 DRILL

DRIL004 _________ EACH 0.00 __________

DRILL PRESS VISE 4"TTC MODEL

DRIL005 _________ EACH 0.00 __________

DRILL PRESS 12" (BENCH TOP TY MODEL #11-990

DRIL006 _________ SET(S) 0.00 __________

DRILL BIT SET THUNDERBOLT # 48 MILWAUKEE NO SUB

DRIL007 _________ EACH 296.91 __________

DRILL DEWALT/ 18.0 VOLT 1/2", ADJUSTABLE,

CLUTCH DRILL/DRIVER/HAMMERDRILL

KIT #DW998K

DRIL011 _________ EACH 43.65 __________

UNBIT STEP DRILL 1/8"-1/2 STEP RANGE, (NO SUB)

DRIL019 _________ KIT(S) 49.00 __________

DEWALT*R 100-PIECE DRILL BIT ACCESSORY KIT - FITS

ALL 3/8 AND 1/2" DRILLS - KIT INCLUDES RAPID

LOAD*R CHUCK, PILOT POINT*R DRILL BITS,

MAGNETIC DRIVE GUIDES AND SCREWDRIVER BITS

DRIL020 _________ SET(S) 0.00 __________

DRILL POINTS - 8 POINTS 1/16 I IN FOR USE OF WOOD

DRIL021 _________ EACH 31.29 __________

DRILL REVERSIBLE ANGLE HEAD AIR DRILLS 1400 RPM

90 DEGREE ANGLE HEAD DESIGN 3/8"

DRIL022 _________ EACH 0.00 __________

DRILL PRESS (INDUSTRIAL 16 1/2 MIDWEST #704844 - DELTA

DRIL025 _________ EACH 193.99 __________

DRILL, CORDLESS 14.4 VOLT -1/2" MODEL #DW996K-2

DEWALT OR APPROVED EQUAL

DRIL050 _________ EACH 5.90 __________

SCREW EXTRACTOR & DRILL SET 10 2 3 4 5 WITH MATCHING

DRIL060 _________ EACH 0.00 __________

DRILL 3/8" REVERSEABLE AIR DR SNAP ON TOOL OR APPROVED EQUAL

DRIL070 _________ EACH 0.00 __________

115PC. DRILL BIT - SELF CENTER INCLUDES 29 FRACTIONAL BITS



32 | P a g e

DRIL080 _________ EACH 3.00 __________

COMBINED DRILLS AND COUNTER SINK SIZE #2

DRIL085 _________ EACH 167.17 __________

MILWAUKEE 5371-6 HAMMER DRILL 1/2" MAGNUM DRILL KIT

DRIL086 _________ EACH 0.00 __________

SCREW EXTRACTOR KIT (GRAINGER 7) OR APPROVED EQUAL

DRIL090 _________ EACH 0.00 __________

RIGHT ANGLE DRILL KIT 1/2" RE VARIABLE SPEED 120 VOLTS 7.0

DRIL101 _________ EACH 130.00 __________

DRILL SET SILVER AND DEMING CO 9/16" TO 1" BY 1/16THS WITH

DRIL102 _________ EACH 90.06 __________

DRILL SET JOBBER 3-IN-1 COMBIN 115 PIECE COBALT WITH CASE

DRIL500 _________ EACH 5.61 __________

KEO RADIUS TY CMB DR&CSK NO. 1 60D HSS

DRIL501 _________ EACH 5.95 __________


DRIL502 _________ EACH 6.44 __________


DRIL503 _________ EACH 7.23 __________


DRIL504 _________ EACH 1.67 __________

C/L TIN JOBBERS DRILL 32 118 DEG PT

DRIL505 _________ EACH 1.67 __________


DRIL506 _________ EACH 2.77 __________


DRIL507 _________ EACH 2.47 __________

C/L TIN JOBBERS DRILL 7 118 DEG

DRIL508 _________ EACH 4.03 __________

C/L TIN JOBBERS DRILL F118 DEG PT

DRIL509 _________ EACH 3.97 __________

C/L TIN JOBBERS DRILL I 118 DEG PT

DRIL510 _________ EACH 1.73 __________

C/L TIN JOBBERS DRILL 1/8 118 DEG PT

DRIL511 _________ EACH 10.58 __________

C/L TIN JOBBERS DRILL, 27/64 118 DEG PT

DRIL512 _________ EACH 13.45 __________




33 | P a g e

DRIL513 _________ EACH 9.46 __________


DRIL514 _________ EACH 13.08 __________


DRIL515 _________ EACH 19.68 __________

CHICAGO LATROBE HS S&D DR 55446 23/32

DRIL516 _________ EACH 20.74 __________


DRIL517 _________ EACH 25.48 __________


DRIL518 _________ EACH 39.15 __________

CHICAGO LATROBE HS S&D DR 55464

1 X 1/2 SH 6" OAL

DRIL519 _________ EACH 1.63 __________


DRIV023 _________ EACH 0.00 __________

CYLINDER LINER DRIVER FOR DIES

CUMMINS SERVICE TOOL #ST-1229

DUST004 _________ EACH 88.00 __________

DUST BAG (700 CFM), BLAST IT ALL BEAD

BLAST CABINET, IRVAN SMITH #11-715

EDGE003 _________ EACH 18.01 __________

STARRETT EDGE FINDERS 827A SINGLE END

EDGE FINDER - LAYOUT & SETUP TOOLS TYPE:

MECHANICAL EDGE FINDER TYPE: SINGLE SHANK DIAMETER

3/8 DECIMAL HEAD DIAMTER: 0.200 HEAD TYPE:

CYLINDRICAL

EDML020 _________ EACH 0.00 __________

TWO FLUTE BALL END MILLS 9/16" 1/2" OVERALL LENGTH 3 1/2

EDML030 _________ EACH 0.00 __________

TWO FLUTE BALL END MILLS 3/4" 3/4" OVERALL LENGTH 3

EDML040 _________ EACH 0.00 __________


EDML050 _________ EACH 0.00 __________

TWO FLUTE BALL END MILLS 1" D OVERALL LENGTH 4 13/16

EDML060 _________ EACH 0.00 __________

TWO FLUTE BALL END MILLS 1/8" SHANK 3/8" OVERALL LENGTH

EDML070 _________ EACH 0.00 __________

TWO FLUTE BALL END 3/16" DIA 3/8" OVERALL LENGTH 2

EDML080 _________ EACH 0.00 __________

TWO FLUTE BALL END MILLS 1/4" SHANK 3/8" OVERALL



34 | P a g e

EDML090 _________ EACH 0.00 __________


EDML100 _________ EACH 0.00 __________


EDML110 _________ EACH 0.00 __________

TWO FLUTE BALL END MILLS 7/16" 1/2" OVERALL LENGTH 1/16

EDML120 _________ EACH 0.00 __________


EDML130 _________ EACH 0.00 __________

END MILLS TWO FLUTE HIGH SPEED RIGHT HAND SPIRAL 3/4

EDML140 _________ EACH 0.00 __________

END MILLS TWO FLUTE DOUBLE END SPEED STEEL RIGHT HAND

EDML150 _________ EACH 0.00 __________

END MILL-DOUBLE END-3/16"-4 F

EDML160 _________ EACH 0.00 __________

END MILL-DOUBLE END-1/4"-4 FL

EDML170 _________ EACH 0.00 __________

END MILL-DOUBLE END-5/16"-4 F

EDML180 _________ EACH 0.00 __________

END MILL-DOUBLE END-3/8"-4 FL

EDML190 _________ EACH 5.20 __________

END MILL-DOUBLE END 1/2"-4 FL

EDML200 _________ EACH 7.20 __________

END MILL-DOUBLE END 5/8"-4 FL

EDML210 _________ EACH 0.00 __________

SHELL END MILLS HIGH SPEED STE HAND SIZE 1 1/2 IN. X

EDML220 _________ EACH 0.00 __________

SHELL END MILLS HIGH SPEED STE HAND SIZE 2 IN. X 3/4

EDML230 _________ EACH 0.00 __________

SHELL END MILLS HIGH SPEED STE HAND SI SIZE 1 3/4 IN. X

EDML240 _________ EACH 0.00 __________

SHELL END MILLS HIGH SPEED STE HAND SIZE 2 3/4 IN. X 1

EDML250 _________ EACH 0.00 __________

R-8 SHELL END MILL ARBORS HARD GROUND DIA FOR BORE IN

EDML260 _________ EACH 22.00 __________

R-8 SHELL END MILL ARBORS HARD GROUND DIA FOR IN SHELL

EDML270 _________ EACH 0.00 __________

R-8 SHELL END MILL ARBORS HARD GROUND DIA FOR BORE IN



35 | P a g e

EDML280 _________ EACH 0.00 __________

SHELL END MILLS RIGHT HAND HSS DIA FLUTE LENGTH 1 1/2

EDML290 _________ EACH 0.00 __________

SHELL END MILLS RIGHT HAND HSS FLUTE LENGTH 1 5/8" HOLE

ELEG010 _________ EACH 0.00 __________

ELECTRIC ENGRAVER DREMEL MODEL 1025 DREMEL #290

ELTH010 _________ EACH 0.00 __________

IC INSERTER EXTRACTOR RADIO SH 1574 OR EQUAL

ELTH020 _________ EACH 0.00 __________

ONE HAND DESOLDERING IRON RADI -2060 OR EQUAL

ELTH030 _________ EACH 0.00 __________

16 PIECE PRECISION TOOL SET RA 64-1961 OR EQUAL

ELTH040 _________ EACH 0.00 __________

VACUUM DESOLDERING TOOL RADIO 2098 OR EQUAL

ELTH050 _________ EACH 0.00 __________

IRON HOLDER RADIO SHACK 64-207

ELTH060 _________ EACH 0.00 __________

STANDARD CRIMPING TOOL RADIO S 404 OR EQUAL

ELTH070 _________ EACH 0.00 __________

XCELITE PLIERS 87CG MINIATURE

ELTH080 _________ EACH 0.00 __________

XCELITE CUTTERS MINATURE 10BCG

ELTH090 _________ EACH 0.00 __________

DIAGONAL CUTTERS 6 IN. 66CG XC EQUAL

ELTH100 _________ EACH 0.00 __________

LONG NOSE PLIERS 6 1/2 IN. 52C OR EQUAL

ELTH110 _________ SET(S) 10.33 __________

XCELITE PS140 SCREWDRIVER & NU SET OR EQUAL

ELTH120 _________ EACH 0.00 __________

CUTTERS-55CG (5 IN.) XCELITE O

ELTH140 _________ EACH 9.61 __________

WELLER - SP23 SOLDERING IRONS

ELTH150 _________ EACH 0.00 __________

ALIGNMENT TOOL KIT GC-5040 OR

ELTH160 _________ EACH 0.00 __________

ALIGNMENT TOOL KIT GC-8283 OR

ELTH170 _________ EACH 0.00 __________

ELECTRICIANS KNIVES K22



36 | P a g e

EXKN010 _________ EACH 0.00 __________

EXACTO KNIFE #5 WITH #19 BLADE STORAGE HANDLE

EXTN005 _________ EACH 0.00 __________

EXTENSIONS 1 1/2" TO 11" 6 P 206AFX OR APPROVED EQUAL

EXTN020 _________ EACH 0.00 __________

7/16" HEX SHANK EXTENSION 18" MILWAUKEE #48-28-4011

EXTN030 _________ EACH 0.00 __________

7/16" HEX SHANK EXTENSION 12" MILWAUKEE #48-28-4006

EZBL010 _________ EACH 0.00 __________

E-Z BLEED BRAKE BLEEDER WAEKON

FACE010 _________ EACH 22.10 __________

FACE SHEILDS, 8-1/2" X 12" X .060",

CLEAR LENS, CURVED INJECTION MOLDED

LENS, LOCKING ADJUSTABLE HEADPIECE

FANS002 _________ EACH 0.00 __________

FANS SNAP ON S6107 OR APPROVED

FBIT010 _________ EACH 0.00 __________

FOSTNER BIT-1/2" SHANK X 3/8"

FBIT015 _________ EACH 0.00 __________


FBIT020 _________ EACH 0.00 __________


FBIT025 _________ EACH 0.00 __________

FOSTNER BIT-1/2" SHANK X 1"

FBIT030 _________ EACH 0.00 __________

FREUD FORSTNER BIT SIZE 1"3/8 DIAMETER 1/2" shank

FEAR010 _________ EACH 2.00 __________

FEMALE AIR CHUCK 1/4" PNT WITH CONNECTION

FEED010 _________ EACH 7.20 __________

POWER FEED - BRIDGEPORT X-AXIS 507034 OR APPROVED EQUAL

FEED015 _________ EACH 0.00 __________

POWER FEED - BRIDGEPORT Z-AXIS 507752 OR APPROVED EQUAL

FILE020 _________ EACH 6.00 __________

FLAT FILES, 12" LENGTH, 2ND CUT

FILE050 _________ EACH 0.00 __________

MILL FILE 12 IN LONG 2ND CUT S CUT ON SILD AND EDGES

FILE060 _________ EACH 0.00 __________

ROUND FILE 12 INCH LENGTH BAST

FILE070 _________ EACH 0.00 __________

ROUND FILE 12 INCH LENGTH 2ND



37 | P a g e

FILE080 _________ EACH 0.00 __________

FLAT WOOD RASP BASTARD 10" LE

FILE090 _________ EACH 0.00 __________

ROUND WOOD RASP - BASTARD - 10

FILE110 _________ EACH 0.00 __________

MILL FILE BASTARD CUT 10 IN LE

FILE120 _________ EACH 0.00 __________

HALF ROUND METAL FILE-10 IN LE BASTARD CUT

FILE125 _________ EACH 57.92 __________

HALF ROUND FILE SET SNAP-ON #H HALF ROUND FILES WITH HANDLES

FILE130 _________ EACH 0.00 __________

HALF ROUND FILE SECOND CUT 10 length

FILE140 _________ EACH 0.00 __________

SQUARE FILE SECOND CUT 10 IN L

FILE150 _________ EACH 0.00 __________

ROUND FILE SECOND CUT 10 IN LE

FILE160 _________ EACH 0.00 __________

MILL FILE SMOOTH CUT 10 IN LEN

FILE165 _________ EACH 0.00 __________

SQUARE FILES 10 IN LONG SMOOTH

FILE170 _________ EACH 0.00 __________

ROUND FILES 8" LONG DOUBLE CU

FILE TAPERS THROUGHOUT

FILE180 _________ EACH 0.00 __________

MILL FILE SMOOTH CUT 8" LONG

FILE190 _________ EACH 0.00 __________

8" LGTH. 25/32 X 13/64 FILES FLAT

FILE200 _________ EACH 0.00 __________

10" LGTH. 31/32" X 1/4 FILES FLAT

FILE210 _________ EACH 0.00 __________

SAWFILE TAPER-TRIAGULAR- EXTRA TAPER 5" LONG 5/16

FILE220 _________ EACH 0.00 __________

SAWFILE TAPER-TRIANGULAR-DOUBL SLIM TAPER 5" LONG

FILE230 _________ EACH 0.00 __________

FILE 3-SQUARE 6" SECOND CUT

FILL005 _________ EACH 62.40 __________

CLASSIC" AUTO BODY FILLER 4 G CASE

FINI400 _________ EACH 0.00 __________

BINKS SPRAY GUN PACKING KIT NO MODEL 69 GUN OR EQUAL



38 | P a g e

FINN001 _________ EACH 0.00 __________

FIN STRAIGHTENER AND CLEANER S 407 HANDLES 89101214 AND

FLAR010 _________ EACH 0.00 __________

45 FLARING AND SWAGING TOOL FO 3/4" O.D. TUBING

FLAR011 _________ EACH 0.00 __________

FLARE & CUTTER KIT FOR BOTH SI DOUBLE FLARE RIDGID #345/150/

FLAR013 _________ EACH 0.00 __________

DELUXE 45 DEGREES FLARING TOOL 3/4" RIDGID #458/36607

FLIN010 _________ EACH 0.00 __________

FLINTS FOR FRICTION LIGHTER

FLOW001 _________ EACH 8.78 __________

ONE WAY FLOW CONTROL VALVE, SWIVEL TYPE W/

ROTARY KNOB ADJUSTMENT, FESTO #549-155

OR APPROVED EQUAL

FLSH015 _________ EACH 15.00 __________

OPTICAL MAGNIFIER FLASHLIGHT SNAP ON

#YA810 OR APPROVED EQUAL

FLSH020 _________ EACH 0.00 __________

MODEL 2283-0228 MINI-LITE AA P

FLUI015 _________ GAL 7.20 __________

GRINDING FLUID RUSTLICK BRAND SYNTHETIC SOLUBLE

FUSE010 _________ EACH 0.00 __________

FUSE PULLER CARTRIDGE TYPE

GAGE001 _________ EACH 6.44 __________

FEELER GUAGE-MUST HAVE AT LEAS BLADES WITH A RANGE OF

GAGE002 _________ SET(S) 0.00 __________

GAGE 81 PIECE GAGE BLACK SET + MSC

06461818 OR SATCO 2672065

GAGE010 _________ EACH 0.00 __________

THREAD MEASURING WIRE SET 48 W

DIFFERENT SIZES ALL 60

GAGE020 _________ EACH 10.95 __________

SCREW PITCH GAGE CHECKS V UNIFED AMERICAN NATIONAL

RANGE 4 TO 84 THREADS PER INCH STARRETT OR

APPROVED EQUAL

GAGE030 _________ EACH 0.00 __________

GAGE WIRE AMERICAN STANDARD WI

GAGE040 _________ EACH 16.73 __________

CENTER GAGE FOR 60 DEGREE THREAD, L.S.

STARRETT #C391 OR APPROVED EQUAL



39 | P a g e

GAGE045 _________ EACH 0.00 __________

RING GAGE - 3/4 - 16 UNC 2A MS 095 OR APPROVED EQUAL

GAGE050 _________ EACH 0.00 __________

RING GAGE - 1 1/8" - 7 UNC 2 1277 OR APPROVED EQUAL

GAGE055 _________ EACH 30.00 __________

SURFACE FINISH GAGE - MSC# 065 PPROVED EQUAL

GAGE060 _________ EACH 0.00 __________

SURFACE GAGE WITH SCRIBER POIN L

LENGTH: 3.5" OVERALL WIDTH:

GAGE065 _________ EACH 0.00 __________

RING GAGE - 1 1/2" - 6 UNC 2A 21392

OR APPROVED EQUAL

GAGE070 _________ EACH 0.00 __________

PLUG GAGE - 1 1/2" - 12 UNF 2 307219

OR APPROVED EQUAL

GAGE101 _________ EACH 35.53 __________

REPL SCRIBER 06243257 3273&06429013 & 918HT.GAGE

GAUG100 _________ SET(S) 8.16 __________

BENT-BLADE FEELER GAUGE SET, 25 BLADES, 1/2" X 3",

.006-.030 BLADE ENDS ARE ANGLED AT 45 DEG.

GGUN001 _________ EACH 7.00 __________

GLUE GUN, HOT PRECISE PRO-90 PROFESSIONAL

HOT GLUE GUN (NO MINI)

GLAS180 _________ PAIR(S) 1.06 __________

GLASSES, SAFETY - TO BE SELLSTROM #76301 OR

APPROVED EQUAL

GLOV041 _________ PAIR(S) 65.50 __________

GLOVES, SANDBLASTER, ABRASIVE BLAST (24" PAIR)

REPLACEMENT BLAST GLOVES, SNAP-ON #YAD007A

GLOV042 _________ PAIR(S) 30.00 __________

GLOVES, BLAST IT ALL BEAD BLAST CABINET GLOVES,

FULL LENGTH, CLOTH LINED, ABRSIVE & STATIC

RESISTANT, SNAP IN MOUNTED FOR EASY

REPLACEMENT TO A 7" PADDED PORT,

IRVAN SMITH INC. #22-110,

PAIR OF GLOVES

GOJO004 _________ CASE(S) 94.50 __________

GOJO HAND CLEANER, CREAM (WATERLESS) W/ PUMICE

(4.5 LB.) CONTAINER, 6 / CASE,

MSC #00281493,

MFG. = GOJO #0975-06

(NO SUBSTITUTE)

GOJO005 _________ EACH 15.80 __________

GOJO SOAP DISPENSER FOR THE 4.5 LB. CONTAINERS,

MSC #00262980, GOJO MFG. #1204-01, (NO SUBSTITUTE)



40 | P a g e

GRCT010 _________ EACH 0.00 __________

GEAR CUTTER DIA PITCH 12 CUTTE 1/4 IN DIA 7/8 IN HOLE

GRCT020 _________ EACH 0.00 __________

GEAR CUTTER DIA PITCH 12 CUTTE ROCK TUTT CUTTER 2 1/4

GRCT030 _________ EACH 0.00 __________

METAL SLITTING SAW W/STAGGERED SIDE CHIP CLEARANCE DIA

GRCT040 _________ EACH 0.00 __________

METAL SLITTING SAW CARBIDE TIP DIA WIDTH 3/16 IN HOLE

GRCT050 _________ EACH 0.00 __________

WOODRUFF KEY SET CUTTER H.S.S DIA. 7/8 IN. WIDTH OF

GRGN001 _________ EACH 8.02 __________

GUN GREASE HAND TO BE USED WIT CARTRIDGE

GRIN001 _________ EACH 0.00 __________

STERLING DRILL GRINDER SHARPEN 90-140 INCLUDED ANGLE ON 1/8

GRIN002 _________ EACH 340.00 __________

6" DOUBLE END PEDESTAL GRINDE CAPACITY 3450 RPM 4 1/8" X

GRIN003 _________ EACH 0.00 __________

BALDER 10" INDUSTRIAL GRINDER X 1" X 7/8" GRINDING WHEELS

GRIN004 _________ EACH 19.94 __________

STRAIGHT DIE GRINDERS 1/4" CO SNAP-ON #AT105

GRIN005 _________ EACH 151.23 __________

BOSCH 5" ANGLE GRINDER BRODHEAD & GARRETT #77-115-694

OR APPROVED EQUAL

GRND002 _________ EACH 0.00 __________

GRINDER DIE GRINDER AIR PT250 USED FOR AUTO BODY SHOP

GRND003 _________ EACH 0.00 __________

AIR GRIND WITH 5 PAD NO SUB

GRND004 _________ EACH 0.00 __________

GRINDER BENCH 1/G HP BG 500 G SNAP ON

OR APPROVED EQUAL

GRND005 _________ EACH 0.00 __________

GRINDER STAND BGPD4 SNAP ON OR

APPROVED EQUAL

GRND007 _________ EACH 56.00 __________

GRINDER 4 1/2" ELEC. ANGLE ET1345 SNAP ON

OR APPROVED EQUAL

GROC001 _________ EACH 109.00 __________

CUTOFF & GROCING KIT, INDEXABLE, 3/8" ENCO




41 | P a g e

GROV001 _________ EACH 99.00 __________

CUTOFF & GROVING KIT, INDEXABLE, 1/2" ENCO


GUAG007 _________ EACH 0.00 __________

MICROMETER TEST GAUGE SNAP-ON 2"

OR APPROVED EQUAL

GUAG008 _________ EACH 0.00 __________

MICROMETER TEST GAUGE SNAP-ON 2 TO 3"

OR APPROVED EQUAL

GUAG009 _________ EACH 0.00 __________


OR APPROVED EQUAL

GUAG010 _________ EACH 0.00 __________


OR APPROVED EQUAL

GUAG011 _________ EACH 0.00 __________

CYLINDER BORE GAUGE SNAP-ON #C

OR APPROVED EQUAL

GUAG012 _________ EACH 0.00 __________

BELT TENSION GAUGE SNAP-ON #GA RANGE

30 TO 180 LB. OR

GUAG013 _________ EACH 0.00 __________

CYLINDER LINER HEIGHT GAUGE (W BAR)

OTC# 7106 OR APPROVED

GUAG020 _________ EACH 25.51 __________

TRUCK SHOE SETTING GAUGE SNAP-ON #YA2780

RANGE 6.5" TO 13.25" OR APPROVED EQUAL

GUAG021 _________ SET(S) 69.97 __________

GUAGE SET, TRUCK CLUTCH ADJUSTMENT GUAGE

SET, OTC 5034-5035, CHECKS

FREE PLAY BETWEEN YOKE & RELEASE BEARING

WEAR PAD 1/8", ALSO CHECKS DISTANCE

BETWEEN RELEASE BEARING & CLUTCH BRAKE

= 1/2"

GUAG022 _________ EACH 2.78 __________

GUAGE, TIRE TREAD DEPTH GUAGE

(0 TO 1" IN 32ND'S) MILTON #448

PART #448

GUNN001 _________ EACH 0.00 __________

HVLP GRAVITY FEED SPRAY GUN CF

OZ. CUP NOZZLE 1.4 NO SUB

GUNN002 _________ EACH 0.00 __________

1 MODEL 7 BINKS SPRAY GUN NO SUB

GUNN003 _________ EACH 0.00 __________

GUN SPOOL SNAP ON MHG5300 OR A EQUAL



42 | P a g e

GUNN008 _________ EACH 0.00 __________

STANDARD SPRAY GUN CLEANER MOD 8 WEEKS

GUNN009 _________ EACH 0.00 __________

PAINT WASTE DISPOSAL WITH GUN SERVICE 16 GALLON DRUM

HAMM007 _________ EACH 59.46 __________

HAMMER, DEAD BLOW, NON-MARRING

HICKORY HANDLE, (15" LENGTH),

MSC #06618771,

MFG. = LIXIE #200H-MH,

(NO SUBSTITUTE)

HAMM010 _________ EACH 16.50 __________

BALL PIN HAMMER (48 OZ.) - SNA B –

HICKORY HANDLE - LENGTH 16

HAMM038 _________ EACH 27.59 __________

DEAD BLOW HAMMER- STEEL PELLET

FILLED PERMANENTLY SPALED HEAD, STEEL

SHANK FOR STRENGTH & RIGIDITY, NON-SPARKING

CHEMICAL RESISTANT, MOLDED URATHANE COVERING,

SANP-ON #HBFE32

HEXD010 _________ SET(S) 17.07 __________

NUT DRIVER (7 / SET) WITH PLASTIC GRIP 3/16 - 7/16

HKEY020 _________ SET(S) 6.09 __________

ALLEN FOLD-UP HEX KEYS (9 PC.) 5/64-1/4" DURACAST

HKEY021 _________ SET(S) 5.73 __________

ALLEN FOLD-UP HEX KEYS (7 PC.), 1.5-6MM DURACAST

HKEY022 _________ SET(S) 5.57 __________

ALLEN FOLD-UP HEX KEYS (9 PC.) .05-3/16" DURACAST

HKEY023 _________ SET(S) 8.56 __________

HEX KEY/SCREWDRIVER FOLD UP 6 PIECE DURACAST 4-1/4

HMHD010 _________ EACH 3.81 __________

HAMMER HANDLE BALL PEN, 12" LONG

HMHD020 _________ EACH 2.59 __________

HANDLE HAMMER BALL PEN 14 IN L

HOLD014 _________ EACH 0.00 __________

TOOL HOLDER RIGHT HAND TURNING

MDJNR-12-4B FOR 55 DEGREE

HOLD015 _________ EACH 0.00 __________

TOOL HOLDER RIGHT HAND TURNING

MCLNR-12-4B FOR 80 DEGREE CNMG

HOLD016 _________ EACH 122.50 __________

TOOL HOLDER PART OFF STYLE SGT

MUST BE ISCAR BRAND! USES .161



43 | P a g e

HOLD017 _________ EACH 24.00 __________

QUICK CHANGE TOOL POST HOLDERS

TURNING FACING FOR ALORIS

HOLD018 _________ EACH 24.00 __________


TURNING FACING FOR ALORIS

HOLD019 _________ EACH 0.00 __________


DUTY BORING FOR ALORIS TOOL

HOLD020 _________ EACH 46.80 __________

QUICK CHANGE TOOL POST HOLDER

BORING FOR ALORIS TOOL POSTS

HOLD021 _________ SET(S) 109.95 __________

QUICK CHANGE TOOL SET, PHASE II HOBBY #2401

INCLUDES 2 TURNING HOLDERS, BORING BAR HOLDER,

& A CUT-OFF TOOL HOLDER, FOR 7 X 10, 7 X 12, &

7 X 14 MINI LATHES AND MANY OTHER SMALL LATHES

LITTLE MACHINE SHOP #3444

HOLD023 _________ EACH 0.00 __________

THREADING TOOL HOLDER - EXTERN 1/2" UNC SHANK SIZE: 3/4" O

HOLD024 _________ EACH 451.40 __________

2" INSERTED CARBIDE FACE MILL CTO MILL MUST BE SECO CARBOLO

HOSE020 _________ EACH 0.00 __________

HOSE AIR 2 BRAID 4 SPIRAL HEAV CONSTRUCTION 3/8" ID HOSE W/

HRDW190 _________ EACH 0.00 __________

HD DRILL BITS - 1/8

HRDW191 _________ EACH 0.00 __________

HD DRILL BITS - 5/32

HRDW192 _________ EACH 0.00 __________

HD DRILL BITS - 11/64

HRDW193 _________ EACH 0.00 __________

HD DRILL BITS - 1/4

HUBB001 _________ EACH 0.00 __________

HUB OIL-SEAL PULLER (KIENE #K- APPROVED EQUAL

HXKY010 _________ EACH 0.00 __________

NO.895 GENERAL 9-HEX KEY SET O

HXKY020 _________ EACH 0.00 __________

VACO HEX KEY CADDY (12 KEYS) O

HXKY030 _________ EACH 0.00 __________

MALCO WTS1 HEX KEY BENCH STAND

HXKY040 _________ EACH 0.00 __________

W1 9 HEX KEY POCKET SET MALCO



44 | P a g e

HXKY050 _________ EACH 0.00 __________

W2 9 HEX KEY POCKET SET MALCO

HXKY060 _________ EACH 0.00 __________

MFR NO 894 P/P HEX KEY WRENCHE

HXKY070 _________ EACH 0.00 __________

MFR NO 895 P/P HEX KEY WRENCHE

HXKY080 _________ EACH 0.00 __________

MALCO WT9S 9 IN T HANDLE HEX K EQUAL

HXKY090 _________ EACH 0.00 __________

MALCO WT9 5/16 IN HANDLE HEX K EQUAL

HXKY100 _________ EACH 0.00 __________

MALCO WT9 3/8 IN T HANDLE HEX EQUAL

HXKY110 _________ EACH 4.77 __________

HEX KEY SET 5/64" TO 1/4", 12 KEYS,

NO.91 MODEL 2332 8910, RUTELAND #0378

OR APPROVED EQUAL

HXKY120 _________ EACH 0.00 __________

HEX KEY SET 3/16 IN TO 3/8 IN

NO 51 MODEL 2332 8510

HXKY130 _________ SET(S) 5.26 __________

HEX KEY WRENCH SET 18 PC SHORT PATTERN SIZES .050 TO 1/4"

LONG PATTERN SIZES 5/64 TO 3/8 SIMILAR TO

PAXTON/PATTERN #18-2488 OR APPROVED EQUAL

HXKY140 _________ EACH 2.16 __________

ALLEN WRENCH SET - 7 PCS 5/64, 3/32, 1/8, 5/32,

3/16, 7/32 & 1/4 LONG HEX WITH TOOL HOLDER

HXKY150 _________ EACH 5.85 __________

ALLEN WRENCH SET 9 PIECE SHORT ARM METRIC HEX KEY 1.5, 2,

2.5, 3, 4, 5, 6, 8, 10

HXKY160 _________ EACH 2.68 __________

ALLEN WRENCHES-METRIC 1 PIECE SETS INCLUDING 1.5 2

HYDR005 _________ EACH 230.65 __________

10 TON PORTO-POWER HYDRAULIC SET BLACKHAWK

#B65115 INCLUDES *PORTABLE

CASE, MALE CONNECTOR, *2 7" 18", 10" & 4"

EXTENSION TUBES *10T HYD. RAM & PUMP, *RAM TOE,

*6' HOSE WITH CPLR, *PLUNGER TOE, *FLEX HEAD,

*WEDGE HEAD, *FLAT BASE, *90 DEGREE V-BASE,

*1/2 T SPREADER, *SERRATED SADDLE OR

APPROVED EQUAL

HYDR008 _________ EACH 205.00 __________

HYDRAULIC PRESS ACCESSORY SET INCLUDES PUSHING ADAPTORS AND



45 | P a g e

IMPC001 _________ EACH 19.93 __________

IMPACT UNIVERSAL JOINT -3/8" DRIVE SNAP-ON #PFU8A

IMPC002 _________ EACH 38.40 __________

IMPACT UNIVERSAL JOINT -1/2 DRIVE - SNAP ON #IP80B

IMPC003 _________ EACH 0.00 __________

AIR IMPACT GUN-3/4 DRIVEHIGH O SNAP-ON #IM75

INDI001 _________ EACH 209.60 __________

INDICATOR, STARRET DIAL TEST .0005

GRADUATION .030 MEASURING RANGE,

WITH ATTACHEMENTS, MSC 86435781OR

STACO MV70-64608 OR APPROVED EQUAL

INDI002 _________ EACH 12.00 __________

MIGHTY MAG W/ 1" INDICATOR MS OR EQUAL

INDI003 _________ EACH 40.00 __________

PARALLEL SET 6" LONG 1/2 - 1

HEIGHTS IN 1/8" INCREMENTS

INJE001 _________ EACH 0.00 __________

INJECTION MASTERFUEL ADAPTOR S

PRESSURE TEST SET TESTS BOTH

INSE001 _________ EACH 8.52 __________

INSERT, CARBOLOY BRAND, COATED CARBIDE,

CNMG STYLE SIZE #432 M5 CHIPBREAKER

MFG'S GRADE TP200, IND. GRADE C6,

MSC # 56977143 OR APPROVED EQUAL

INSE002 _________ EACH 15.08 __________

INSERT, CARBOLOY BRAND, COATED CARBIDE,

DNMG STYLE SIZE #442A-3GNL30, EDP #017047,

CHIPBREAKER, MFR'S GRADE TP200,

IND. GRADE C6, MSC #89705776

OR APPROVED EQUAL

INSE003 _________ EACH 11.30 __________

INSERT MUST BE ISCAR BRAND, COATED CARBIDE,

C-TYPE, STYLE #GFR-4-4D,

.161 WIDTH, 4 DEGREE LEAD ANGLE, .009 RADIUS,

GRADE IC-354, MSC #60802477 OR APROVED EQUAL

INSE010 _________ EACH 0.00 __________

THREADING INSERT - VALENITE VL BE

VALENITE BRAND (MSC #080135

INSE015 _________ EACH 10.10 __________

INSERTS - CARBIDE FOR 2" FACE BE

SECO CARBOLOY OFEX 05T305T

INSE020 _________ EACH 16.50 __________

GROOVING INSERTS - MUST BE STE FNG3178R TP21

INSE100 _________ EACH 6.24 __________

TOP NOTCH CRB PROFILE INS NPL51 KC730



46 | P a g e

INSE101 _________ EACH 9.88 __________

SECO CARB MILLING INSERT OFEXO5T305TN-ME07 T25M

INSE102 _________ EACH 6.75 __________

CARBIDE MILLING INSERT, STELLRAM,

SDMT09T308EN-41 SP6564

INSE103 _________ EACH 7.12 __________

ISCAR CARBIDE MILLING INS SEKR42AFN-76 IC928

INSE104 _________ EACH 10.57 __________

ISCAR CUT OFF INSERT GFR3 4D IC-354

JACK200 _________ EACH 0.00 __________

2 TON SERVICE JACK - BROADHEAD B174885

OR APPROVED EQUAL

JACK201 _________ EACH 285.00 __________

3 TON SERVICE JACK, 5-3/4 " LOW HEIGHT 20"

HIGH HEIGHT, ANSI RATED, ATD #7331 OR

APPROVED EQUAL

JIGG001 _________ EACH 0.00 __________

5C INDEX SPIN JIG - 10 VERNIER 1 DEG.

INDEXING ACCEPTS 5C C

JOIN005 _________ EACH 13.16 __________

JOINTS 1/4" 3/8" 1/2" U-JOI SNAP ON 103UFTS OR APPROVED

JOIN006 _________ EACH 38.40 __________

JOINT 1/2" DR IMPACK SWIVEL (U-JOINT),

SNAP ON IP80B OR APPROVED EQUAL

KITS004 _________ EACH 0.00 __________

1/4" HELI-COIL KIT (INCLUDES: DRILL

BIT INSTALLATION TOOL)

KITS005 _________ SET(S) 0.00 __________

WELDER SADERING GUN KIT

KITS007 _________ EACH 185.03 __________

GRINDING BURR KIT (8 PC.) - SNAP ON

#VWB800C OR APPROVED EQUAL

KITS008 _________ EACH 145.00 __________

GRINDING & SURFACE PREP KIT, SNAP ON

#DGK300 OR APPROVED EQUAL

KITS010 _________ EACH 0.00 __________

PUNCH KIT

KITS013 _________ KIT(S) 28.00 __________

RIVET TOOL KIT SNAP-ON #HP200A HP2

RIVET TOOL, 1/8" DRILL

BIT, 200 ASSORTED RIVETS IN 1/2"

AND 3/16" DIA. PLUS 120 DEGREE COUNTERSINK

OR APPROVED EQUAL



47 | P a g e

KITS014 _________ KIT(S) 0.00 __________

THREAD SETTING KIT SNAP-ON #HP OR APPROVED EQUAL

KITS016 _________ KIT(S) 0.00 __________

RIVITER KIT 12597296 (39001)

KITS030 _________ SET(S) 0.00 __________

HEX WRENCH KITS

KITT074 _________ SET(S) 81.17 __________

STANLEY*R MICRO TOUGH*T 75-PIECE MECHANIC TOOL

SET - 1/4 AND 3/8" SAE AND METRIC DRIVE LASER-

ETCHED SOCKETS -INCLUDES 8-PIECE COMBINATION

WRENCH SET, NINE SCREWDRIVER BITS

AND 10-PIECE HEX KEY SET

KITT075 _________ SET(S) 11.00 __________

EKLIND*R 22-PIECE FRACTIONAL/ METRIC HEX-L*R KEY SET - SIZES

.050 THRU 3/8" SAE AND 1.5 THRU 10 METRIC

KITT076 _________ KIT(S) 62.25 __________

CHANNELLOCK*R 4-PIECE TOOL KIT - 8" ADJUSTABLE WRENCH,

9-1/2" TONGUE-AND-GROOVE PLIERS, 6" NEEDLE

NOSE PLIERS W/ SIDE CUTTER AND 4-IN-1 SCREWDRIVER

KITT077 _________ EACH 20.00 __________

KIT TIGER TOOL DELUXE PULLER KIT 300 EMERSON

#KIT-300 OR APPROVED EQUAL

LATH001 _________ EACH 0.00 __________

LATHE CLAUSING 14" GEARED HEAD LATHE SPECS: SWING OVER BED = 14"

OVER CROSS SLIDE = 8" BED WIDTH = 10", SPINDLE

BORE = 1-5/8" SPINDLE NOSE = D1-5, SPIND LE TAPER

= MT4, NUMBER OF SPEEDS = 18, RPM RANGE = 2000,

NUMBER OF LONGITUDINAL FEEDS = 48, RANGE OF

LONGITUDINAL FEEDS = .0016 - .040, NUMBER OF CROSS

FEEDS = 48, RANGE OF CROSS FEEDS = .00045 - .0114,

NUMBER OF METRIC THREADS = 60, RANGE OF METRIC

THREADS = .21 -24.0, NUMBER OF INCH THREADS = 60,

RANGE OF INCH THREADS = 108-1 & 1/8, LEADSCREW

TPI = 4, CORSS SLIDE TRAVEL = 9-5/8", COMPOUND

TRAVEL = 4-1/2", MAX TOOL SIZE = 3/4" X 3/4",

TAILSTOCK RAM DIAMETER = 1-7/8", TAILSTOCKRAM

TRAVEL = 5-3/4", TAILSTOCK TAPER = MT3, MOTOR HP =

5.2/3.4 STANDARD EQUIPMENT DUAL INCH/METRIC DIALS,

Q.C. TOOL POST, STEADY REST, MICRO CARRIAGE STOP,

4 POSITION BED STOP, COOLANT SYSTEM, ONE SHOT

LUBRICATION CHUCK GUARD, SPLASH GUARDTHREAD DIAL

INDICATOR, DRIVE PLATE, T-SLOT TOP SLIDE, ELECTRO-

MAGNETIC, CHIP PAN, ELECTRICAL: 208/230V, 60HZ,

3 PHASE (THIS ITEM MUST BE CLAUSING MODEL

#C144OS) NO SUBSTITUTE

LATH002 _________ EACH 0.00 __________

LATHE EASY SET UNIVERSAL 3 JAW CHUCK 10" DIAMETER SPINDLE

LATH003 _________ EACH 470.00 __________

LATHE ATLAS MEDIUM DUTY IRON B INDEPENDENT CHUCK 10



48 | P a g e

LATH004 _________ EACH 0.00 __________

LATHE 5C COLLET CHUCK LEVER TY 14" LATHES ACTION MACHINERY

LATH005 _________ EACH 0.00 __________

LATHE 5C COLLETS 1/64TH" THRU BY 64THS. ACTION MACHINERY

LATH006 _________ EACH 0.00 __________

LATHE COMPLETE BRAKE LATHEINCL BRAKE LATHE BRAKE LATHE BENCH

LEAD028 _________ EACH 46.13 __________

TEST LEAD KIT, SNAP-ON #MT300, CONTAINS

4 COLOR CODED TEST LEADS, EACH LEAD

IS 4" LONG, SNAP ON OR APPROVED EQUAL

LEVL035 _________ EACH 0.00 __________

LEVEL MAGNETIC ANGLE SNAP ON Y OR APPROVED EQUAL

LEVL039 _________ EACH 7.03 __________

STANLEY*R 9" ALUMINUM CAST V-GROOVED TORPEDO LEVEL -

MAGNETIC EDGE - THREE 360*D VIALS

LEVL040 _________ EACH 10.46 __________

TORPEDO LEVEL, 9" LONG LEVEL, PLUM 6

45 DEGREE VIALS, EMPIRE #991-9 OR

APPROVED EQUAL

LEVL041 _________ EACH 0.00 __________

9" ALUMINUM MAGNETIC TORPEDO READING VIALS:

LEVEL PLUMB

LIFT015 _________ EACH 1,750.00 __________

POWER TRAIN LIFT, SUPPORTS UP TO 1250 LBS.,

COMPACT DESIGN & SWIVEL CASTERS FOR EASY

MANEUVERABILITY, COMES WITH TILTING PLATE,

HEIGHT RANGE = 29-1/2" TO 68-1/2",

OTC PART #1585A

LIFT020 _________ SET(S) 20.04 __________

LIFTING BRACKETS (4000 LB CAP. 0 OR APPROVED EQUAL

LIGH010 _________ EACH 0.00 __________

SINGLE FLINT FRICTION LIGHTER

LIVE039 _________ EACH 173.40 __________

LIVE CENTER, SHANK SIZE 1 MT MFG = BISON,

ENCO #240-7214

LIVE040 _________ EACH 0.00 __________

LIVE CENTER #3 #3 MORSE TAPER INCLUDED ANGLE 5.71 LONG

LIVE041 _________ EACH 0.00 __________

LIVE CENTER #4 #4 MORSE TAPER

INCLUDED ANGLE 7.62 LONG 1.77

LIVE100 _________ EACH 158.11 __________

SPRING TYPE LIVE CENTER3MT 5000 RPM



49 | P a g e

LUBE102 _________ GAL 17.91 __________

WD-40, (1 GALLON SIZE)

LUBE103 _________ EACH 2.83 __________

SPRAY APPLICATOR FOR WD-40 GALLON

LUBE104 _________ EACH 7.13 __________

PISTOL OILERS, 6 OZ. 6" FLEX SPOUT

LUBR003 _________ EACH 92.00 __________

WAY OIL LUBRICANT, VACTRA #2, (5 GALLON)

CONTAINER OR APPROVED EQUAL

MACH010 _________ EACH 0.00 __________

VCM 200 SERIES CUTTING MACHINE EQUIPMENT - MODEL VCM-200

MALL010 _________ EACH 0.00 __________

MALLETS RAWHIDE FACE DIA. 1 1/ LENGTH OF HEAD 3 IN APP

MALL020 _________ EACH 0.00 __________

MALLETS SOLID RAWHIDE ON WOOD 4 - 2 IN FACE DIA. 3 1/2

MALL030 _________ EACH 0.00 __________

HAMMER SOFT FACE PLASTIC REMOV HICKORY HANDLE 8 OZ.

MALL040 _________ EACH 0.00 __________

HAMMER SOFT FACE PLASTIC REMOV HICKORY HANDLE 10 OZ.

MALL050 _________ EACH 5.60 __________

MALLET, RUBBER HEAD, LENGTH 3-1/8", WEIGHT = 20 OZ.

MALL060 _________ EACH 20.00 __________

HAMMER BRASS SOLID BRASS HEAD POUND HEAD

MALL070 _________ EACH 0.00 __________

HARDWOOD MALLETS MFG. NO. 3 2 X 5 1/2 IN HEAD SIZE

MALL080 _________ EACH 0.00 __________

MALLET TINNERS ROUND HEAD-PLAI 1/2 IN X 5 1/2 IN B/G

MALL090 _________ EACH 0.00 __________

MALLETS TINNERS ROUND HICKORY HEAD LENGTH 2 1/4 IN FACE

MALL100 _________ EACH 0.00 __________

MALLETS TINNERS ROUND HICKORY HEAD LGTH. 2 3/4 IN FACE

MALL110 _________ EACH 0.00 __________

MALLETS TINNERS ROUND HICKORY HEAD LGTH. 2 1/2 IN. FACE

MALL120 _________ EACH 0.00 __________

MALLETS 3 1/8 IN. HEAD LGTH. 2 FACE DIA. 16 OZ. RAWHIDE

MALL130 _________ EACH 0.00 __________

MALLETS 4 1/2 IN. HEAD LGHT. 2 RAWHIDE 13 3/8 IN HANDLE

MASK003 _________ EACH 0.00 __________

MASKING MACHINE HOLD 2 18" RO INCLUDES LARGE ADJUSTABLE



50 | P a g e

MASK007 _________ EACH 0.00 __________

MASKING MACHINE HOLDS 2 18" R STORAGE TRAY SAND PAPER TRAY

MASK014 _________ CASE(S) 0.00 __________

MASKING TAPE 3/4" X 60 YRDS 48 PER CASE

MASK015 _________ CASE(S) 90.24 __________

MASKING TAPE 2" - 60 YRDS (48 PER CASE)

MEAS002 _________ EACH 20.64 __________

MIGHTY MAG SPI INDICATOR, MFG. = SPI #98-266-0, MSC #05893177

(NO SUBSTITUTE)

MEAS003 _________ KIT(S) 23.91 __________

DIAL INDICATOR & POINT SET, MAGNETIC BASE,

3-PIECE KIT, MSC# 02830107,

MFG = SPI #13-667-1,

(NO SUBSTITUTE)

MEAS004 _________ EACH 118.95 __________

DIAL INDICATOR, SNAP-ON #CM6563470, NO SUBSTITUTE

MECH030 _________ EACH 0.00 __________

MACHINE COUNTERSINKS HSS 82 0/

ANGLE SIZE CUT 1/2" SHANK

MECH050 _________ EACH 0.00 __________

BULLNOSE LINE CENTERS TAPE OR

ANGLE 75 LARGE DIA. 4.13

MECH060 _________ EACH 0.00 __________

BULL NOSE LIVE CENTERS TAPE OF 4

ANGLE 75 0/0 LARGE DIA

MECH070 _________ EACH 0.00 __________

LIVE CENTERS 60 DEGREE POINT M TAPE NO 3

MECH080 _________ EACH 0.00 __________

LIVE CENTER - BALL BEARING TYP

CENTER TO FIT A NO.2

MECH090 _________ EACH 0.00 __________

DIAMOND WHEEL DRESSER 7/16" D WT

OF DIAMOND 1/2 CARAT

MECH100 _________ EACH 0.00 __________

DIAMOND DRESSER SIZE 1/2 CT. D CLUSTER

MECH110 _________ EACH 0.00 __________

WHEEL DRESSING STICKS SIZE 1" GRADE 24-S RUTLAND OR

MECH120 _________ EACH 0.00 __________

RUTLAND/NOGA DEBURRING TOOL 5 MODEL NO. 20571905 OR

MECH130 _________ EACH 0.00 __________

HUNTINGTON DRESSERS MODEL 2074 EQUAL



51 | P a g e

MECH140 _________ EACH 0.00 __________

HUNTINGTON CUTTERS DIA. 1 1/2 1/2 IN FACE WIDTH .432

MECH150 _________ EACH 0.00 __________

ANGLE PLATE PRECISSION GROUND

PARALLEL TO .0002 ALL

MECH160 _________ EACH 0.00 __________

ANGLE PLATE PRECISSION GROUND

PARALLEL TO .0002 SIZE

MECH170 _________ EACH 0.00 __________

PERMANENT MAGNETIC BASES 9 IN 32 IN SCRIBER OPENING

MECH180 _________ EACH 5.74 __________

TELESCOPIN MAGNETIC PICKUP FLEXO STIFF MAGNETIC PICKUP

METR014 _________ EACH 0.00 __________

REFRACTOMETER EETA305A SNAP ON APPROVED EQUAL

METR050 _________ EACH 0.00 __________

DISC BRAKE MICROMETER .330-1. 300 INCHES 3-1/2" DEEP FRAME

METR051 _________ EACH 0.00 __________

DISC BRAKE MICROMETER 1.000-2.000 INCHES

METR076 _________ EACH 45.00 __________

DWYER MARK II MOLDED PLASTIC MANOMETER

MICM001 _________ EACH 13.50 __________

MICROMETER-0-1" RANGE-WITH FRICTION STOP & LOCK

AND LOCK (STARRETT #436L-1 OR APPROVED EQUAL)

MICM010 _________ EACH 14.80 __________

OUTSIDE MICROMETER 0 TO 1 IN T THOUSANDS OF AN INCH.

MICM020 _________ EACH 123.49 __________

OUTSIDE MICROMETER 1" TO 2, TEN

THOUSANDS OF AN INCH WITH FRICTION,

THIMBLE, LOCK NUT AND 1 IN CHECKING

DISC. NO. T2FL, L.S. STARRETT OR

APPROVED EQUAL

MICM030 _________ EACH 0.00 __________

OUTSIDE MICROMETER CALIPER SET STARRETT ONLY SET INCLUDE

MICM040 _________ EACH 0.00 __________

MUL-T-ANVIL MICROMETERS CALIPE WITH ROUND FLAT AND "V

MICM050 _________ EACH 0.00 __________

DISC TYPE MICROMETER COMPLETE RATCHET STOP AND LOCKNUT

MICM060 _________ EACH 47.50 __________

MICROMETER DEPTH GAGES NON-ROT BLADES WITH 4 INCH BASE

MICR019 _________ EACH 0.00 __________

MICROMETER HVLP AIR KEYSTONE M SAT71050 OR EQUAL



52 | P a g e

MICR020 _________ EACH 0.00 __________

MICROMETER AIR WITH GUAGE KEYS MODEL # SAT-2771 OR EQUAL

MICR035 _________ EACH 125.95 __________

TRUCK BRAKE DRUM MICROMETER #8 26" RANGE OR APPROVED EQUAL

MICR040 _________ SET(S) 408.52 __________

METRIC MICROMETER SET (OUTSIDE M TO INCLUDE: CASE STANDARDS

MICR300 _________ EACH 101.74 __________

OUTSIDE MECHANICAL MICROMETER, MINIMUM MEASURING RANGE:

0 MAXIMUM MEASURING RANGE: 1 GRADUATION: 0.0001 IN

THIMBLE: RATCHET FINISH/COATING: SATIN CHROME

CARBIDE FACES (STARRETT ITEM #67997)

OR APPROVED EQUAL

MICR301 _________ EACH 176.20 __________

STARRETT MICROMETER OS T436.1XRL-5 4-5RG CRBF

OUTSIDE MECHANICAL, MIN. MEASURING RANGE INCH: 4

MAXIMUM MEASURING RANGE INCH: 5

GRADUATION (DECIMAL INCH): .0001"

THIMBLE: RATCHET, FINISH: SATIN CHROME

MICR302 _________ EACH 102.07 __________

STARRETT MICROMETER OS V436.1MXRL-25 0-25M CR

OUTSIDE MECHANICAL - MICROMETERS MIN. MEASURING

RANGE 0 MM, THIMBLE: RATCHET, SATIN CHROME FINISH

MICR303 _________ EACH 103.83 __________

STARRETT MICROMETER OS 436.1MXRL-50 25-50MCRB

OUTSIDE MECHANICAL, MICROMETER MIN. MEASURING

RANGE: 25 MM, MAX. MEASURING RANGE: 50MM,

GRADUATION: 0.01 MM, THIMBLE: RATCHET, SATIN

CHROME FINISH

MICR304 _________ EACH 148.55 __________

STARRETT DEPTH MICROMETER 445AZ-3RL 0-3" W/RS&LN

DEPTH MECHANICAL, BASE LENGTH:3,

GRADUATION: 0.0001 IN., MAX. MEASURING RANGE: 3,

MIN. MEASURING RANGE: 0, NUMBER OF RODS: 3,

ROD DIAMETER: 5/32

MICR305 _________ EACH 124.92 __________

STARRETT MICROMETER OS T436.1XRL-3 2-3RG CRBF

OUTSIDE MECHANICAL, MIN. MEASURING RANGE2 INCH

MAXIMUM MEASURING RANGE 3 INCH, GRANDUATION

DECIMAL INCH .0001", THIMBLE: RATCHET, SATIN

CHROME FINISH

MICR306 _________ EACH 10.06 __________

SPI ENAMEL OUTSIDE MICRO 0-1" X .0001

MILL001 _________ EACH 0.00 __________

BRIDGEPORT MILLING MACHINE SERIES I2J VARI-DRIVE HEAD



53 | P a g e

MILL002 _________ EACH 7,900.00 __________

VERTICAL MILLING MACHINE - SHARP MODEL LMV

9" x 42" TABLE, MACHINE

IS TO COME COMPLETE WITH ONE ACU-RITE 200M

DRO & ONE SERVO POWER FEED ON X-AXIS

MILL003 _________ EACH 135.00 __________

END MILL, INDEXABLE 3" DIAMETER 5 INSERT

R-8 SHANK BISON PART #8-01-540

ENCO ORDER #FD307-0211 - NO SUBSTITUTES

MILL004 _________ EACH 180.00 __________

END MILL SET INDEXABLE 1.25"/ DIAMETER

R-8 SHANK ENCO ORDER

MILL005 _________ EACH 3.50 __________

INSERT CARBIDE TIN COATED (FOR INDEXABLE

END MILLS) TPG 322

MILL006 _________ EACH 1,165.00 __________

DIGITAL READOUT (DRO) FOR MILLING MACHINE 2-AXIS

6" X 16" MANUFR:FAGOR P/N M6X16,

MSC #73238642, M16 X 6, 2 AXIS

DRO MILL PACKAGE , NO SUBSTITUTE

MILL007 _________ SET(S) 77.60 __________

END MILL SET, DOUBLE, COBALT, 2 FLUTE ENCO


MILL008 _________ SET(S) 132.95 __________

END MILL SET, SINGLE, COBALT, 2 @ 4 FLUTE


MILL011 _________ EACH 999.00 __________

DIGITAL READOUT PACKAGE FOR MILLING APPLICATIONS,

ACU-RITE BRAND, 2 AXIS, MSC #63818025,

LONGITUDINAL TRAVEL = 32,

CROSS TRAVEL (INCH) = 13,

ACCURITE #21V32-1332

MILL101 _________ PACK OF 2 16.85 __________

TABLE GUARD & TOTE, CARRY TRAY, KEEPS TOOLS IN REACH,

STOPS CHIPS FALLING INTO "T" SLOTS

GROOVED TO FIT INTO TABLE'S "T" SLOTS,

HEAVY DUTY PLASTIC, 2 TRAYS / SET,

CEDARBERG #8706-001 OR APPROVED EQUAL

MILL102 _________ EACH 10.70 __________

DRAWBAR HAMMER BRIDGEPORT ACCESSORIES

MIXR025 _________ EACH 0.00 __________

MUD MIXER - 24" LONG WITH 5" ADJUSTABLE IMPELLARS AND

MKAG010 _________ EACH 0.00 __________

MARKING GAUGES STANLEY NO 47-0 EQUAL

MKGA001 _________ EACH 0.00 __________

MARKING GAGE STEEL BLADE RETRA CAST SLUMINUM BODY-5 IN



54 | P a g e

MKGA020 _________ EACH 0.00 __________

SCRACTH AWL 3 1/2 IN BLADE LGT IN LGTH OVERALL PEXTO

MKGA030 _________ EACH 0.00 __________

A-50 SCRIBER CARBIDE TIPPED MA EQUAL

MKGA040 _________ EACH 0.00 __________

A-50 R NO SUB SCRIBBER CARBIDE MALCO OR EQUAL

MKGA050 _________ EACH 0.00 __________

SCRIBBERS-PEN TYPE CARBIDE TIP LONG WITH REMOVABLE TIP

MKGA060 _________ EACH 2.67 __________

SCRIBERS MACHINIST ONE STRAIGH ONE BENT POINT OVERALL

MOIL001 _________ EACH 0.00 __________

NO. 102 2 QUART OIL MEASURE

MOIL010 _________ EACH 0.00 __________

NO.33F EAGLE OILER PUMP OR EQU CAPACITY

MPAN _________ EACH 0.00 __________

MUD PAN SPACKLE PLASTIC - 14" DEEP INCLUDES HANG UP TAB

MROD001 _________ EACH 14.73 __________

STARRETT END MEASURE ROD 234A-1 1" W/ INSUL. HANDLE

MROD002 _________ EACH 17.62 __________


MROD003 _________ EACH 19.42 __________


MROD004 _________ EACH 19.42 __________


NOZZ004 _________ EACH 8.00 __________

NOZZLE, #5 CERAMIC, BLAST IT ALL BEAD BLAST CABINET,

IRVAN SMITH #20-075

ORIF001 _________ EACH 16.00 __________

GUN ORIFICE #4, BLAST IT ALL, BEAD BLAST CABINET,

IRVAN SMITH #20-065

PADS052 _________ EACH 15.55 __________

DISC PAD ASSEMBLY, 3M ROLOC, PROVIDES FIRM SUPPORT

FOR ROLOC TYPE DISCS, 2' DIAMETER,

1/4" SHAFT, TRANSPORTATION SUPPLIES INC. #05539

OR APPROVED EQUAL

PARA100 _________ EACH 41.05 __________

ADJUSTABLE PARALLELS - MUST BE BRAND (MSC #86405867

OR APPROV

PARR016 _________ SET(S) 169.88 __________

SPI PARALLEL SET 1/8" 10 PAIR SET

HEIGHT RANGE: 1/2 - 1-5/8 X 1/8 THICKNESS: 1/8

LENGTH: 6, HARDNESS: 50-54 HRC



55 | P a g e

PINS015 _________ EACH 8.37 __________

LOCK PIN NL-46 FOR STELLRAM MCLNR-12-4B,

MSC #82971102

PINS016 _________ EACH 3.40 __________

LOCK PIN NL-46L FOR VALENITE MDJNR-12-4B,

MSC 382972209

PIST006 _________ EACH 0.00 __________

PISTON RING EXPANDER SNAP-ON # 2" TO 7"

CAPACITY FOR HD DIE

PLAT009 _________ EACH 0.00 __________

PLATE OTC ADAPTOR NH +V COMMIN PART

# 205059 OR APPROVED

PLAT012 _________ EACH 0.00 __________

PLATE OTC ADAPTOR PLATE COMMIN PART

# 61405 OR APPROVED

PLAT076 _________ EACH 0.00 __________

PLATE 24" X 36" X 4" BLACK SURFACE

PLATE MSC 86433075 OR

PLAT077 _________ EACH 0.00 __________

PLATE CABINET STAND FOR 24" X SURFACE

PLATE SATCO NS60-81504

PLIE001 _________ EACH 18.09 __________

PLIER, LONG NOSE WITH SIDE CUTTERS,

AND COIL SPRINGS,

MFG. = KLEIN, #D203-6C, (NO SUB)

PLIE002 _________ EACH 0.00 __________

PLIERS DIAGONAL WITH SKINNING FOR 12 AND 14 AWG.

PLIE003 _________ EACH 0.00 __________

PLIERS DIAGONAL MIDGET WITH TA HOLES MFG. PART# D245-5

PLIR005 _________ SET(S) 75.00 __________

PLIERS, NEEDLE NOSE SET 3 PCS. SNAP-ON #PL6711A

OR APPROVED EQUAL

PLIR006 _________ SET(S) 59.10 __________

PLIERS CUTTERS SET, SNAP-ON # PL300CP

OR APPROVED EQUAL

PLIR007 _________ EACH 57.82 __________

LARGE ADJUSTABLE PLIER, HL120P (SNAP-ON)

OR APPROVED EQUAL

PLIR010 _________ EACH 0.00 __________

COMBINATION PLIERS THIN STRAIG IN LONG

1 1/4 IN CAPACITY

PLIR020 _________ EACH 3.30 __________

NO. 7 UTICA COMBINATION SLIP JOINT PLIERS

LENGTH 8" OR APPROVED EQUAL



56 | P a g e

PLIR025 _________ SET(S) 0.00 __________

LOCKING PLIERS DISPLAY BOARD ( ONE EACH –

10-R 7-R 10-WR

PLIR030 _________ EACH 7.70 __________

PLIERS SLIP JOINT COMBINATION 6 1/2"

CHANNELOCK 426G OR

APPROVED EQUAL

PLIR031 _________ EACH 18.04 __________

PLIERS, JOINT, ADJUSTABLE, 4-3/4", SNAP-ON

#AWP45, NO SUBSTITUTE

PLIR040 _________ EACH 9.64 __________

PLIERS 9 1/2 IN 5 ADJUSTMENTS, JAW CAPACITY

1-1/2 IN CHANNEL, LOCK 420 GRAMS

OR APPROVED EQUAL

PLIR041 _________ EACH 20.85 __________

DIAGONAL CUTTING PLIER, 15/16" EDGE, 7 5/16" LONG

WITH INSULATED GRIPS. SNAP-ON #87CF

LIFETIME WARRANTY

PLIR190 _________ EACH 6.30 __________

PLIERS LONG NOSE MILLED JAWS TAPERING TO 1/16" NEEDLE

NOSE, 6" OVERALL LENGTH

PLIR200 _________ EACH 0.00 __________

JEWELER'S FLAT NOSE PLIERS 5 I CURROGATED JAWS NICKEL

PLUG020 _________ EACH 0.00 __________

PLUGS KWIK CHANGE- STEEL 3/8" MALE- M STYLE

PLUG021 _________ EACH 0.00 __________

PLUGS KWIK CHANGE- STEEL 3/8" FEMALE M STYLE

PLUM010 _________ EACH 0.00 __________

NO 1-BENT PICKING CHISEL 5/8 I 72 IN LONG BALTIMORE

PNCH002 _________ EACH 6.81 __________

PIN PUNCH - MIDSET PIN PUNCH HEX SIZE 9/32 PT. EDGE 1/10",

LENGTH 3" (SNAP-ON #PPC402A) OR APPROVED EQUAL

PNCH003 _________ EACH 7.83 __________

PIN PUNCH - HEX SIZE 3/8" POINT 5/32", LENGTH 5"

(SNAP ON #PPC105A) OR APPROVED EQUAL

PPNH020 _________ EACH 6.48 __________

PIN PUNCH 9/32 HEX SIZE 3/32 EDGE POINT 4 1/2" LENGTH

SNAP-ON #PPC 103A OR APPROVED EQUAL

PPNH030 _________ EACH 7.50 __________


SNAP-ON #PPC104A OR APPROVED EQUAL



57 | P a g e

PPNH040 _________ EACH 9.90 __________



PRES009 _________ EACH 0.00 __________

PRESS DRILL 110V SNAP ON WV250 APPROVED EQUAL

PULL002 _________ SET(S) 0.00 __________

PULL ROD SET STECK ORIGINAL IN 6 PULL RODS DRILL BIT AND

PULL003 _________ EACH 0.00 __________

PULLEY ACC/DR INSTALLER SNAP O OR APPROVED EQUAL

PULL004 _________ EACH 0.00 __________

PULLER HYDRAULIC SLEEVE SNAP O OR APPROVED EQUAL

PULL005 _________ EACH 0.00 __________

PULLER SET HYDRAULIC SNAP ON C OR APPROVED EQUAL

PULL006 _________ EACH 4.68 __________

PULLER SEAL TOOL IS USED TO RE AND GREASE SEALS ON AUTOMOBILE

PULL007 _________ EACH 120.25 __________

AUTOMATIC SLACK ADJUSTER PULLE TIGER TOOL #10407

PULL015 _________ EACH 20.10 __________

PITMAN ARM PULLER OTC #7311 OR EQUAL

PUMP003 _________ EACH 0.00 __________

BARREL PUMPS DELIVERS 1 1/2 PI LIFT STROKE

PUMP030 _________ EACH 50.72 __________

LEVER BARREL TYPE PUMP FOR TRANSFER OF LUBRICANTS,

SOLVENTS, AND INDUSTRIAL CHEMICALS

ZINC AND CHROME PLATED SELF ADJUSTING

TELESPCOPIC TUBE, FITS 15 TO 55 GALLON DRUMS

PUNC004 _________ EACH 0.00 __________

STARRETT / PUNCHES : STOCK NO. 875365 NO SUB

PUNC025 _________ EACH 395.85 __________

PUNCH & CHISEL SET SNAP-ON #PPC270AK OR APPROVED EQUAL

PUNH010 _________ EACH 0.00 __________

PIN PUNCHES - SET OF 8 PIN PUN LONG AND IN VARIOUS TIP

PUNH020 _________ EACH 0.00 __________

NO 353 3/8 IN OSBORNE CENTER P EQUAL

PUNH030 _________ EACH 50.72 __________

NO 353 1/2 IN OSBORNE CENTER P EQUAL

PUNH040 _________ EACH 0.00 __________

CENTER PUNCH SQUARE SHANK KNUR 6 IN LONG

PUNH050 _________ EACH 0.00 __________

CENTER PUNCHES - 1/4 IN GROUND WITH 1/8 INCH TIP (SNAP-



58 | P a g e

PUNH060 _________ EACH 22.57 __________

CENTERPUNCH, AUTOMATIC TYPE, STARRETT #818 OR APPROVED EQUAL

PUNH070 _________ EACH 0.00 __________

PUNCHES CENTER ROUND KHURLED

PUNH072 _________ EACH 0.00 __________

CENTER PUNCH MIDGET 9/32 HEX S POINT EDG 3" LENGTH SNAP

PUNH074 _________ EACH 7.50 __________

CENTER PUNCH 5/16 HEX SIZE 1/8 POINT EDGE 5" LENGTH


PUNH076 _________ EACH 12.23 __________

CENTER PUNCH 7/16 HEX SIZE 3/16 POINT EDGE 6" LENGTH


PUNH080 _________ EACH 0.00 __________

PRICK PUNCH 1/2 IN X 6 IN FORG

PUNH090 _________ EACH 0.00 __________

ROUND CHASSIS PUNCH-SIZE 1 1/8 GREENLEE SERIES 730 OR

PUNH100 _________ EACH 0.00 __________

KNOCKOUT PUNCH SET GREENLEE 1 IN OR EQUAL

PUNH110 _________ EACH 0.00 __________

KNOCKOUT PUNCH SET GREENLEE 1/ IN -1 IN 1 1/4 IN OR

PUNH120 _________ EACH 0.00 __________

NO 199943 1/2 IN SIZE PUNCHES OR EQUAL

PUNH130 _________ EACH 0.00 __________

NO 199954 5/8 IN SIZE PUNCHES OR EQUAL

PUNH140 _________ EACH 0.00 __________

NO 199965 3/4 IN SIZE B/G PUNC HOLLOW OR EQUAL

RACH010 _________ EACH 0.00 __________

1/2" DRIVE RATCHET

RACH015 _________ EACH 21.45 __________

3/8" DRIVE RATCHET

RAMP002 _________ EACH 0.00 __________

RAMPS TRUCK 20-TON GRAY #TR-2 OR APPROVED EQUAL

RAMP010 _________ EACH 0.00 __________

OIL CHANGE RAMPS - BROADHEAD G B613085 OR APPROVED EQUAL

RATC001 _________ EACH 0.00 __________

RATCHET DRILL 1/4" H/D HR REV

RATC002 _________ EACH 22.75 __________

RATCHET/AIR 1/4" REVERSIBLE

RATC003 _________ EACH 42.60 __________

RATCHET/AIR 3/8" REVERSIBLE



59 | P a g e

RATC004 _________ EACH 30.29 __________

RATCHETS SEALED 3/8" SNAP-ON RAT803 OR APPROVED EQUAL

RATC005 _________ EACH 0.00 __________

RATCHETS 1/2" DR LONG SEALED SNAP ON SL832 OR EQUAL

RATC006 _________ EACH 0.00 __________

3/8" AIR RATCHETS SNAP-ON #AT

RATC008 _________ EACH 11.55 __________

SCREWDRIVER RATCHET

RATE001 _________ EACH 0.00 __________

RATCHET MINI JAWS RIDDELL (PRU

REEL003 _________ EACH 45.11 __________

AIR HOSE REEL (HOSE NOT INCLUD TENSION BRAKE CONTROLS REEL R

REEL005 _________ EACH 455.95 __________

LOW-PRESSURE (300LB) HOSE REEL TO INCLUDE 30-35 FT.

OF 3/8 INCH HOSE. ADJUSTABLE

BALL STOP AND 12" CONNECTING HOSE. REEL IS METAL

CONSTRUCTION. MAX PRESS IS 300 PSI

REMO100 _________ CAN(S) 0.00 __________

LAYOUT DYE REMOVER - DYKEM MSC 5 OR APPROVED EQUAL

RISE100 _________ KIT(S) 74.39 __________

SPI SINE BAR RISER KIT SINE BAR WITH 18 RISERS

RULE006 _________ EACH 0.00 __________

QTY 6 RULERS 16' YA154A SNAP O NO SUB

SAND040 _________ EACH 255.69 __________

HUTCHINS HUSTLER, II STRAIGHTLINE SANDER-2011

TRIPLE COUNTER BALANCE SYSTEM AND 2 CYCLINDER TWIN

DRIVE VERTICALLY ENGAGED GEAR SYSTEM VIBRATION

FREE RECIPROCAL STROKE. INCLUDES PSA PAD

DESIGNED FOR THE USE OF 2 3/4" ABRASIVE ROLLS -

NO SUBSTITUTE

SAND041 _________ EACH 128.00 __________

VIKING DUAL PISTON SANDER 2, 400 SPM

4 CFM - 1/4" AIR

INLET 2 3/4 X 17" PAD MADE IN USA

SAWZ003 _________ EACH 0.00 __________

SAW RECIPROCATING FOR AUTOBODY

SAWZ015 _________ EACH 297.84 __________

BAND SAW BENCH MOUNTED DELTA M 0

SBIT070 _________ EACH 0.00 __________

3" DIA MULTISPUR GREENLEE OR

SCAF010 _________ EACH 0.00 __________

SCAFFOLDING WALK THRU END FRAM 6'

6" X WIDTH 5' X 1 5/8" O.



60 | P a g e

SCAF011 _________ EACH 0.00 __________

SCAFFOLDING STEP TYPE END FRAM 5'0

WIDTH X 1 5/8" O.D. TUBE

SCAF012 _________ EACH 0.00 __________

SCAFFOLDING PLANK WIDTH OF 19" LENGTH 75 PSF CAPACITY BUILT

SCAF013 _________ EACH 0.00 __________

SCAFFOLD DIAGONAL BRACE PIVOTA WITH 10 FOOT SPACING

SCAF014 _________ EACH 0.00 __________

SCAFFOLD CASTERS 8" DIAMETER WITH BRAKE AND SWIVEL ACTION

SCAF015 _________ EACH 0.00 __________

SCAFFOLD RIVET PIN 2" LONG HO PIN IN SCAFFOLDING

SCRA001 _________ EACH 0.00 __________

SCRAPER GASKET SCRAPE SURFACES FOR INSTALLING NEW GASKETS

SCRE014 _________ SET(S) 0.00 __________

MAGNETIC SCREWDRIVER SET SNAP- #SSDMRT220 OR APPROVED EQUAL

SCRE015 _________ SET(S) 1.30 __________

MAGNETIC SCREWDRIVER SET SNAP- #SSDMRT213 OR APPROVED EQUAL

SCRE016 _________ SET(S) 0.00 __________

MINIATURE SCREWDRIVER SET SNAP #SDE70 OR APPROVED EQUAL

SCRP015 _________ EACH 1*** __________

SCRAPER UTILITY BLADE - RETRACTABLE - TO BE USED

WITH STANDARD UTILITY KNIFE BLADE

SCRW001 _________ SET(S) 7.36 __________

SCREW DRIVERS IDEAL 35-9169 THRU 9171,

IDEAL 35-9017 THRU 9022 &

IDEAL 36-203 OR APPROVED EQUAL

SCRW003 _________ EACH 33.05 __________

SCREWDRIVER CORDLESS ELECTRIC -

RECHARGABLE W/ BATTERY - BLA

CK & DECKER VERSAPAC OR APPROVED EQUAL

SCRW013 _________ EACH 1.96 __________

SCREW FOR SIZE 22 TPMM INSERT ENCO


SCRW054 _________ SET(S) 15.67 __________

STANLEY*R 4-PIECE TORX*R SCREW DRIVER

SET - T10, T15, T20 AND

T25 - INCLUDES STORAGE RACK

SCRW055 _________ EACH 0.00 __________

TORX SCREWDRIVER SNAP-ON # SDT

SCRW056 _________ EACH 0.00 __________

TORX SCREWDRIVER SNAP-ON # SDT



61 | P a g e

SCRW057 _________ EACH 0.00 __________

FLAT TIP CABINET ORANGE SCREWD SNAP-ON #SDD1430

SCRW058 _________ EACH 0.00 __________

RATCHETING SCREWDRIVER SNAP-ON NO SUBSTITUTE

SCRW059 _________ EACH 0.00 __________

FLAT TIP SCREWDRIVER SNAP-ON #SDD2 NO SUBSTITUTE

SCRW060 _________ EACH 4.61 __________

SCREWDRIVER-4" STRAIGHT TIP-S TO BE

KLEIN #600-4 OR APPROVED

SCRW061 _________ EACH 9.00 __________

SCREWDRIVER, FLAT TIP .030" X 5-3/4"

SNAP-ON #SDD306, (NO SUBSTITUTE)

SCRW065 _________ EACH 0.00 __________

SCREWDRIVER-6" STRAIGHT TIP-S TO BE

KLEIN #600-6 OR APPROVED

SCRW066 _________ EACH 152.50 __________

SCREWDRIVER KIT CONTRACTOR - VARIABLE SPEED 0-2500 RPMS,

HEAVY DUTY MOTOR WITH

2 STAGE GEAR REDUCTION UNIT. KIT INCLUDES 1/4",

3/8", 5/16", AND 7/16" MAGNETIC HEX SOCKETS, #1,

#2, #3, & #4, PHILLIPS BITS AND STEEL CARRING.

TO BE PORTER CABLE #96645 OR APPROVED EQUAL

SCRW067 _________ EACH 0.00 __________

SCREW SHOOTER DRYWALL - 120 VO 0-2500 NO LOAD RMPS - 1/4" HE

SCRW100 _________ BOX(S) 0.00 __________

SOCKET SET SCREWS CUP POINT SI thread per in. 1" long.

SCRW115 _________ EACH 0.00 __________

SCREWDRIVER 4 MM BLADE (12006 OR APPROVED EQUAL

SDML040 _________ EACH 0.00 __________

STAGGERED TOOTH SIDE MILLING C 6" DIA WIDTH OF FACE

SDRV010 _________ EACH 0.00 __________

SCREWDRIVER LIGHT BLADE CABINE 3 IN BLADE STANLEY NO

SDRV020 _________ EACH 0.00 __________


SDRV022 _________ EACH 0.00 __________

SCREWDRIVER STANDARD TIP TIP W X 11/64" BLADE LENGTH 3

SDRV024 _________ EACH 0.00 __________


SDRV026 _________ EACH 0.00 __________


SDRV030 _________ EACH 0.00 __________




62 | P a g e

SDRV040 _________ EACH 0.00 __________

SCREWDRIVER STD. BLADE & TIP B LENGTH 3 IN STANLEY NO

SDRV050 _________ EACH 0.00 __________

SCREWDRIVER STD. BLADE & TIP B LENGTH 4 IN STANLEY NO

SDRV060 _________ EACH 4.51 __________

SCREWDRIVER STD. BLADE & TIP, BLADE LENGTH 6" STANLEY NO.

1006-6 OR APPROVED EQUAL

SDRV070 _________ EACH 5.78 __________

SCREWDRIVER STD. BLADE & TIP, BLADE LENGTH 8" STANLEY NO.

1006-8 OR APPROVED EQUAL

SDRV080 _________ EACH 0.00 __________

SCREWDRIVERS STD. BLADE & TIP 10" BLADE

SDRV090 _________ EACH 0.00 __________

SCREWDRIVER STUBBY SQUARE SHAN STANLEY NO 1009 OR EQUAL

SDRV100 _________ EACH 0.00 __________

SCREWDRIVER STUBBY SQUARE SHAN STANLEY NO 1013 OR EQUAL

SDRV110 _________ EACH 0.00 __________

SCREWDRIVER PHILLIPS HEAD STAN PLUS 2 3/4" BLADE O PT

SDRV120 _________ EACH 0.00 __________

SCREWDRIVERS PHILLIPS HEAD STA PLUS 3" BLADE 1 PT OR

SDRV124 _________ EACH 0.00 __________

SCREWDRIVER #1 PHILLIPS SNAP-O 143 OR EQUAL

SDRV130 _________ EACH 2.15 __________


SDRV134 _________ EACH 14.25 __________

SCREWDRIVER #2 PHILLIPS SNAP-ON #SDD 440 OR APPROVED

EQUAL

SDRV140 _________ EACH 0.00 __________


SDRV150 _________ EACH 0.00 __________

SCREWDRIVERS PHILLIPS HEAD STA PLUS 8" BLADE 4PT OR

SDRV160 _________ EACH 0.00 __________

SCREWDRIVER PHILLIPS NO 2 LONG (SNAP-ON) OR EQUAL

SDRV170 _________ EACH 1.57 __________

PHILLIPS SCREWDRIVER POINT BLA MODEL P6 SIZE 1 3/16

SDRV180 _________ EACH 1.64 __________

PHILLIPS SCREWDRIVER POINT BLA MODEL P5 SIZE 2 1/4

SDRV190 _________ EACH 0.00 __________

SCREWDRIVER OFFSET STD. TIP (S 4 INCH STANLEY NO 669 OR



63 | P a g e

SDRV200 _________ EACH 0.00 __________

SCREWDRIVER OFFSET STD. TIP (S 6 INCH STANLEY NO 671 OR

SDRV210 _________ EACH 0.00 __________

SCREWDRIVERS POCKET 2" BLADE NO 1010 OR EQUAL

SDRV220 _________ EACH 0.00 __________

SCREWDRIVER 4" 1 CRESCENT SH 10-8250 OR EQUAL

SDRV230 _________ EACH 0.00 __________

SCREWDRIVER BIT SLOTTED CRESCE 10-8252 OR EQUAL

SDRV240 _________ EACH 0.00 __________

SCREWDRIVER BIT PHILLIPS CRESC 10-8254 OR EQUAL

SDRV250 _________ EACH 0.00 __________

SCREWDRIVER SPIRAL RATCHET STA 68-131 PREMIUM QUALITY

SDRV260 _________ EACH 0.00 __________

SCREWDRIVER-XCLITE R-184 OR EQ

SDRV270 _________ EACH 0.00 __________

SCREWDRIVER-XCLITE R-101 OR EQ

SDRV280 _________ EACH 0.00 __________

XCLITE PHILLIPS DRIVERS XST-10

SDRV285 _________ SET(S) 35.73 __________

SCREWDRIVER SET PHILLIPS XCELI

SUPER-TRU TIP TO CONTAIN

SDRV290 _________ EACH 15.79 __________

SET JEWELERS SCREWDRIVERS 6 ST NO 190620

NO JS-6 OR APPROVED EQUAL

SDRV300 _________ EACH 0.00 __________

SCREWDRIVER TORX #45 SNAP-ON O (T45 SDTX 645)

SDRV310 _________ EACH 0.00 __________

SCREWDRIVER PHILLIPS TIP TIP # LGTH 9 5/8" OVERALL

SDRV320 _________ EACH 14.25 __________

SCREWDRIVER PHILLIPS TIP NO. 2 BLADE,

LENGTH 3" OVERALL LENGTH 4-3/4",

SNAP-ON #SSDP-243 OR APPROVED EQUAL

SDRV330 _________ EACH 0.00 __________

SCREWDRIVER ROUND SHANK TIP WI X 3/16" BLADE LENGTH 2 7/

SDRV350 _________ EACH 7.58 __________

SCREWDRIVER ROUND SHANK TIP WI X 1/4" BLADE LENGTH 4

SDRV360 _________ EACH 15.21 __________

SCREWDRIVER ROUND SHANK TIP WIDTH .50 X 3/8" BLADE

LENGTH 8

SDRV370 _________ EACH 0.00 __________

SCREWDRIVER ROUND SHANK TIP WI 3/8" BLADE LENGTH 2 1/2



64 | P a g e

SDRV380 _________ EACH 0.00 __________

SCREWDRIVER ROUND SNANK TIP WI 1/4" SNAP-ON NO SSD-1

SDRV390 _________ EACH 8.93 __________

SCREWDRIVER, MISCELLANEOUS, SHORT TIP,

WIDTH .20 X 1/8" SNAP-ON #SSD234A

OR APPROVED EQUAL

SDVR052 _________ EACH 5.66 __________

6 - IN- 1 SCREWDRIVER - 7 1/2"

RIP STOCK NO. 2H151 (GRAINGER)

SEAL055 _________ EACH 0.00 __________

HUB OIL SEAL PULLER KIENE #K-1

HUB SEALS FROM HD TRUCK STEER

SEAL111 _________ EACH 9.00 __________

THREADLOCKERS, (10 ML.), REMOVABLE

SETS007 _________ EACH 0.00 __________

SETS FRELER GUAGE SET SNAP ON

APPROVED EQUAL

SETS008 _________ EACH 0.00 __________

SETS CUMMINS BTC SERVICE SET S

2017DSP OR APPROVED EQUAL

SETS009 _________ EACH 0.00 __________

SETS DETROIT 537192 SERVICE SE

SNAP ON 2020GDSP OR APPROVED

SETS010 _________ EACH 0.00 __________

SETS CUMMING INJECTOR TIMER SE

SNAP ON CM 6433 OR APPROVED

SETS011 _________ EACH 0.00 __________

SETS CUMMING INJECTOR TIMING S

CM6432 SNAP ON OR APPROVED

SETS012 _________ EACH 43.24 __________

SET, TIRE VALVE, SNAP-ON #TRX4000

OR APPROVED EQUAL

SETS013 _________ EACH 21.27 __________

SETS IMPACT DRIVER SET SNAP ON

OR APPROVED EQUAL

SETS014 _________ EACH 75.83 __________

SETS, EXTRACTOR SET, SNAP ON #REX25A

OR APPROVED EQUAL

SETS015 _________ SET(S) 0.00 __________

A PC. OUTSIDE MICROMETER SET S #PMF 115

IN A WOODEN CASE

SETS016 _________ SET(S) 0.00 __________

SMALL HOLE GUAGE SET SNAP-ON # OR APPROVED EQUAL



65 | P a g e

SETS017 _________ SET(S) 0.00 __________

COMBINATION IGNITION/FEELER GA

SNAP-ON #FB328A OR APPROVED

SETS018 _________ SET(S) 0.00 __________

INSIDE MICROMETER SET SNAP-ON RANGE

2-12" IN .001 INCREMENT

SETS019 _________ SET(S) 0.00 __________

1/2" DRIVE IMPACT SOCKET SET #310IMMYA 10 PC. SHALLOW

SETS020 _________ SET(S) 0.00 __________

IMPACT SOCKET SET SNAP-ON #214 14 PC. 3/8" DR. SHALLOW

SETS021 _________ SET(S) 0.00 __________

DIAL TEST INDICATOR SET SNAP-O OR APPROVED EQUAL

SETS050 _________ SET(S) 38.99 __________

SCREWDRIVER SET 22 PIECE - CRA FTSMAN


- SLOTTED SCREWDRIVER: 3/32", X 1 1/2" MICRO,

1/8" X 4", 3/16" X 4", 3/16" X 6", 3/16" X 4" CABI

NET, 1/4" X 1 1/2", 1/4" X 4", 1/4" X 6", 1/4" X 8

", 5/16" X 8", PHILLIPS SCREWDRIVERS (ROUND SHAFT)

: #0 X 1 1/2", #0 X 2 1/2", #1 X 3", #2 X 1 1/2",

#2 X 4", #2 X 8", #3 X 6", TORX SCREWDRIVERS: T-10

, T-15, SPECIALTY SCREWDRIVERS: 1/4" X 1/4" SLOTTE

D OFFEST, #1 X #2 PHILLIPS OFFSET, CASE - ALL TOOL

S MUST HAVE A FULL UNLIMITED WARRANTY NOTE

SETS051 _________ SET(S) 194.99 __________

MECHANICS TOOL SET (181 PIECE) CRAFTSMAN (9-33681) OR

APPROVED EQUAL (122 SOCKETS,

6 DRIVE TOOLS, 14 WRENCHES & 93 ADDT'L TOOLS) -

ALL TOOLS MUST HAVE A FULL UNLIMITED WARRANTY

SHAK011 _________ EACH 0.00 __________

PNEUMATIC PAINT SHAKER NO SUB

SHRP002 _________ EACH 111.00 __________

DRILL BIT SHARPENER (DEWALT #4LD90) NO SUBSTITUTE

SIMP010 _________ EACH 0.00 __________

SIMPSON AC/DC MULTITESTER

SINE001 _________ EACH 0.00 __________

SINE BAR BROWN & SHARPE MSC 06

SATCO MV45-26986 OR EQUAL

SLIR021 _________ EACH 0.00 __________

MER. NO. HR-77 USES 1/8 IN. 5/

3/16IN DIA ALUMINUM AND

SLIR022 _________ EACH 0.00 __________

NIBBLING TOOL FOR SHEET METAL

B+G #B549089 OR EQUAL



66 | P a g e

SLIR023 _________ GROSS 14.95 __________

ACID BRUSHES 6" LONG 1/4" WIDE

SLIR024 _________ EACH 0.00 __________

SOLDIERING TOOL STAND WELLER P CASTBASE WSPONGE

SNIP010 _________ EACH 0.00 __________

M-1R RIGHT HAND SNIPS CUTS LEF LENGTH AVIATION WISS

SNIP020 _________ EACH 0.00 __________

M-2R LEFT HAND SNIP CUTS RIGHT LENGTH AVIATION WISS

SNIP030 _________ EACH 23.78 __________

M-3R COMBINATION SNIPS, CUTS

STRAIGHT RIGHT OR LEFT, COMPLETE

WITH YELLOW GRIPS, 10" LENGTH,

WISS AVIATION OR APPROVED EQUAL

SNIP040 _________ EACH 0.00 __________

M1R-S1 SNIPS CUTS LEFT SPECIAL

AVIATION WISS OR EQUAL

SNIP050 _________ EACH 0.00 __________

M2R-S1 CUTS RIGHT SPECIAL SERI WISS OR EQUAL

SNIP060 _________ EACH 0.00 __________

M-41R DOUBLE CUT SNIPS 8 1/4 I

AVIATION WISS OR EQUAL

SNIP070 _________ EACH 0.00 __________

A-9 12 1/2 IN LGTH LGTH OF CUT STR.

PATT WISS OR EQUAL

SNIP080 _________ EACH 0.00 __________

A-10. 11" LGTH LGTH OF CUT 2 STR.

PATT. WISS OR EQUAL

SNIP090 _________ EACH 0.00 __________

A-11 10" LGTH LGTH OF CUT 2 1 OR EQUAL

SNIP100 _________ EACH 0.00 __________

M-19 3" CUT LGTH 12 1/2" STE MALCO OR EQUAL

SNIP110 _________ EACH 0.00 __________

M-9 3" CUT LGTH 12 1/2 IN OVE 1 LB 8 OZ REG PATTERN

SNIP120 _________ EACH 0.00 __________

M-18 3 1/2" CUT LGTH 13 1/2" LB 4 OZ COMB. SNIPS NO

SNIP130 _________ EACH 0.00 __________

M-16 2 1/2" CUT LGTH 16" LGT 4 OZ BULL DOG COMB. NO

SNIP140 _________ EACH 0.00 __________

NO M14 LGTH OF CUT 3 1/2" OVE 14" 1 LB 8 OZ SNIPS

SNIP150 _________ EACH 0.00 __________

SNIPS 12" ALUMINUM FRAME STRA

WITH REPLACEABLE BLADES. TO BE



67 | P a g e

SNOW105 _________ EACH 0.00 __________

SNOW SHOVELS BENT HANDLE METAL

SNOW110 _________ EACH 34.75 __________

SNOW SHOVEL PUSHER W/ BRACES 24" METAL

SOCK003 _________ EACH 0.00 __________

10 PIECE SAE IMPACT DEEP SOCKE 1/2" DRIVE 7/16"1/2"9/16

SOCK005 _________ SET(S) 24.99 __________

SOCKET SET-1/4 DRIVE MUST CONTAIN AT LEAST 9 SOCKETS,

6 POINTS FROM 3/16" TO 1/2" PLUS 1

RATCHET, 2 SPINNER HANDLES &

2 EXTENSIONS, BLACKHAWK #114-C

OR APPROVED EQUAL

SOCK007 _________ EACH 62.20 __________

SOCKETS IMPACT SOCKETS 1/2" D DEEP

SOCKETS COMPLETE SET 3/8

SOCK008 _________ EACH 0.00 __________

SOCKETS 13 PC 1/2" DRIVE DEEP SOCKETS

SNAP ON 313SIMA OR

SOCK009 _________ EACH 22.95 __________

SOCKETS 15 PC 1/2" QR. 6 PT I SOCKETS

METRIC 315SIMMYA

SOCK010 _________ EACH 40.98 __________

SOCKET SET 3/8" DRIVE ALL PURPOSE SET 20 PIECES-

8 DEEP SOCKETS, 9 STANARD SOCKETS 1 RATCHET,

2 ACCESORIES PACKED IN STEEL CASE S-K #4520

OR APPROVED EQUAL

SOCK011 _________ EACH 0.00 __________

SOCKET 1/2" DRIVE 6 POINT SHA METRIC IMPACT SET 10MM - 32MM

SOCK012 _________ EACH 103.54 __________

SOCKET SET, STANDARD, 6 PT., 3/8"

DRIVE 1/4" TO 7/8", SNAP-ON #211FS OR

APPROVED EQUAL

SOCK013 _________ EACH 349.95 __________

SOCKETS 3/4" DR SET SOCKETS & RATCHTS,

SNAP ON 434HDB OR APPROVED EQUAL

SOCK014 _________ EACH 0.00 __________

SOCKET SET METRIC DEEPWELL 6PT 10MM TO 32MM SNAP-ON

SOCK015 _________ EACH 80.30 __________

SOCKETS 3/8" DR 6 PT. SHALLO SOCKETS SNAP ON 222SFFS OR

SOCK016 _________ EACH 0.00 __________

SOCKET SET3/8" DRIVE DEEP 6 P 8 PIECES1/4" TO 7/8

SOCK017 _________ SET(S) 0.00 __________

1/2" METRIC STANDARD LENGTH C POINT 10MM TO 32MM SNAP-



68 | P a g e

SOCK018 _________ EACH 59.32 __________

SOCKET SET 1/4" DRIVE DEEP SO METRIC 9 PCS 6 7 8

SOCK019 _________ EACH 139.85 __________

SOCKETS 3/8" DR 6 PT DEEP UNIV SOCKETS

SNAP ON #207FSU OR APP

ROVED EQUAL

SOCK020 _________ EACH 0.00 __________

SOCKET STANDARD. 3/8 IN DRIVE IN SNAP-ON FS281

SOCK021 _________ EACH 0.00 __________

SOCKETS DRUM PLUG SOCKETS SNAP A172A OR APPROVED EQUAL

SOCK022 _________ EACH 435.49 __________

SOCKETS, 1/4" DRIVE SOCKET SET, (44 PC)

SNAP ON #144MPB OR APPROVED

EQUAL

SOCK023 _________ EACH 0.00 __________

SOCKETS BUDD SOCKETS SNAP ON B

OR APPROVED EQUAL

SOCK024 _________ EACH 0.00 __________

SOCKET SHACKLE PIN SOCKET SNAP OR

APPROVED EQUAL

SOCK025 _________ EACH 0.00 __________

SOCKET SHACKLE PIN SOCKET SNAP SNAP

ON SPS11 OR APPROVED

SOCK026 _________ EACH 0.00 __________

SOCKET SET 118 PC. STANLEY

SOCK027 _________ EACH 43.96 __________

SOCKET SET 20 PIECE 3/8 DRIVE METAL BOX MFG. PART# 655208

SOCK028 _________ EACH 16.20 __________

1/4 INCH DRIVE SOCKET SET SNAP -ON #144 TMPB

SOCK030 _________ EACH 0.00 __________

SOCKET STANDARD 3/8 IN DRIVE 6 13/16 IN SNAP-ON FS261

SOCK031 _________ EACH 0.00 __________

SOCKETS 1/4" METRIC DEEP 6 PT 12 PCS. (5M TO 15MM) IMPACT

SOCK032 _________ EACH 0.00 __________

SOCKETS 3/8" STANDARD DEEP 6 11 PCS. (1/4" TO 7/8") CHROM

SOCK033 _________ EACH 0.00 __________

SOCKETS 3/8" UNIVERSAL SOCKET (6PCS.)(7/16" TO 3/4") CHROM

SOCK034 _________ EACH 0.00 __________

SOCKETS FLARE NUT SOCKETS 6PT. (3/8" TO 3/4") CHROME SNAP-O

SOCK035 _________ EACH 0.00 __________

SOCKETS 3/8" FLARE NUT SOCKET (7PCS.)(10MM TO 19MM) CHROME



69 | P a g e

SOCK036 _________ EACH 0.00 __________

SOCKETS 3/8" SHALLOW TORX SOC (10PCS.)(E10 TO E18) CHROME

SOCK037 _________ EACH 0.00 __________

SOCKETS 3/8" TORX SOCKETS IMP (10PCS.)(E4-E-18)INDUSTRIAL

SOCK038 _________ EACH 0.00 __________

SOCKETS 3/4" DEEP SOCKETS 6PT (20PCS.)(3/4" TO 2")

SOCK039 _________ EACH 0.00 __________

SOCKETS 3/4" DEEP SOCKETS 6PT (9PCS)(19MM TO 38MM)

SOCK040 _________ EACH 0.00 __________

SOCKET STANDARD 3/8 IN DRIVE

6 3/4 IN SNAP-ON FS241 OR

SOCK041 _________ EACH 34.85 __________

SOCKETS SPARK PLUG SOCKET EXTR

6PT. 3/8" DRIVE 5/8" SIZE

SOCK042 _________ EACH 36.81 __________

SOCKET SPARK PLUG SOCKET EXTRA

6 PT. 3/8" DRIVE 13/16" SIZE

SOCK043 _________ SET(S) 0.00 __________

SOCKET TORQUE LIMITING SOCKET

USE ON FOREIGN DOMESTIC CARS

SOCK044 _________ EACH 0.00 __________

HEAVY DUTY 6 POINT (3 1/2" X KD# 2451 HUB SOCKET OR

SOCK045 _________ EACH 0.00 __________

HEAVY DUTY 6 POINT (1 1/4" X IMPACT SOCKET

SOCK046 _________ EACH 0.00 __________

SOCKET - 11MM 3/8 DRIVE DEEP I AL FINISH 6 PT. (SNAP-ON

SOCK047 _________ EACH 0.00 __________

SOCKET - 13MM 3/8 DRIVE DEEP I AL FINISH 6 PT. (SNAP-ON #SIM

SOCK049 _________ EACH 3.95 __________

SOCKET 20-MM 1/2" DRIVE 12 PO N OR APPROVED EQUAL)

SOCK050 _________ EACH 10.01 __________

SOCKET, STANDARD 3/8" DRIVE 6 PT., (11/16"), SNAP-ON #FS221

OR APPROVED EQUAL

SOCK051 _________ EACH 0.00 __________

SHOCK ABSORBER SOCKET 3/8" DRIVE 1/4" OVAL WIDTH

SOCK052 _________ EACH 0.00 __________

SHOCK ABSORBER SOCKET 3/8" DRIVE 15/64" OVAL WIDTH

SOCK054 _________ EACH 0.00 __________

3/8" BLACK SOCKET 3/8" DRIVE SNAP-ON #PF120A

SOCK055 _________ EACH 0.00 __________

10MM 3/8" DRIVE SHALLOW BLACK SNAP-ON #IMFM10A NO SUBSTITUTE



70 | P a g e

SOCK056 _________ EACH 3.95 __________

1/2" DEEP SOCKET (CHROME) 3/8" DRIVE 6 POINT, SNAP-ON #SFS161

OR APPROVED EQUAL

SOCK057 _________ EACH 4.20 __________

9/16" DEEP SOCKET (CHROME) 3/8" DRIVE 6 POINT, SNAP-ON #SFS181

OR APPROVED EQUAL

SOCK058 _________ EACH 0.00 __________

7/16" DEEP SOCKET (CHROME)3/8" DRIVE 6 POINT

SOCK059 _________ EACH 34.50 __________

12 POINT SOCKET SET 3/8" DRIVE R SNAP-ON #212 FLY 1/4" THRU 7

8" CHROME SOCKETS, STANDARD DEPTH INCLUDING SOCKET

RAIL AND CLIPS OR APPROVED EQUAL

SOCK060 _________ EACH 0.00 __________

SOCKET STANDARD 3/8 IN DRIVE 6 5/8 IN SNAP-ON FS201 OR

SOCK070 _________ EACH 4.38 __________

SOCKET STANDARD 3/8 IN DRIVE 6 9/16 IN SNAP-ON FS181 OR

SOCK080 _________ EACH 0.00 __________

SOCKET STANDARD 3/8 IN DRIVE 6 IN SNAP-ON FS161 OR EQUAL

SOCK090 _________ EACH 0.00 __________

SOCKET STANDARD 3/8 IN DRIVE 6 IN SNAP-ON FS141 OR EQUAL

SOCK091 _________ EACH 22.69 __________

SOCKET, 7/8" DEEP IMPACT, 1/2" DRIVE,

6 POINT, SNAP-ON#SIM280, NO SUBSTITUTE

SOCK100 _________ EACH 3.40 __________

SOCKET, STANDARD, 3/8" DRIVE 6 POINT, 3/8" SNAP-ON #FS212 OR

APPROVED EQUAL

SOCK110 _________ EACH 0.00 __________

S-K IMPACT SOCKET SET 1/2" DR

IMPACT SOCKETS ALL SIX

SOCK111 _________ EACH 271.37 __________

3/4" DRIVE DEEP IMPACT SOCKET

SOCKET RAILS AND CLIPS SIZE 3/

SOCK112 _________ SET(S) 0.00 __________

1" DRIVE DEEP IMPACT SOCKETS N

#519S1M SIZES 7/8" THRU 2"

SOCK113 _________ EACH 14.88 __________

3/8" DRIVE IMPACT UNIVERSAL J N

#1PF80 OR APPROVED EQUAL

SOCK115 _________ EACH 24.05 __________

HAND IMPACT TOOL KIT-3/8 DRIVE

IMPACT TOOL COMPLETE WITH 5 T

IPS IN PLASTIC BOX (LISLE #29000 OR EQUAL)



71 | P a g e

SOCK120 _________ EACH 0.00 __________

SOCKET STANDARD 1/2" DRIVE 12 SNAP-ON OR EQUAL

SOCK121 _________ EACH 0.00 __________

SOCKET 1 3/16" STANDARD 1/2" WELL

6PT SNAP-ON NO

SOCK122 _________ EACH 0.00 __________

SOCKET 1 1/4" STANDARD 1/2"D WELL 6PT SNAP-ON TS401 OR

SOCK125 _________ SET(S) 170.17 __________

WHEEL BEARING LOCKNUT SOCKET S ES 12

POPULAR SIZES AND A STOR

SOCK130 _________ EACH 0.00 __________

SOCKET STANDARD 1/2" DRIVE 12 IN SNAP-ON OR EQUAL

SOCK140 _________ EACH 0.00 __________

SOCKET STANDARD. 1/2 IN DRIVE 7/8 IN SNAP-ON OR EQUAL

SOCK150 _________ EACH 0.00 __________

SOCKET STANDARD 1/2 IN DRIVE 1 13/16 IN SNAP-ON OR EQUAL

SOCK160 _________ EACH 0.00 __________


SOCK170 _________ EACH 0.00 __________


SOCK180 _________ EACH 0.00 __________


SOCK190 _________ EACH 35.44 __________

SOCKET STANDARD 1/2 IN DRIVE 1 9/16"

SNAP-ON OR APPROVED EQUAL

SOCK200 _________ EACH 0.00 __________


SOCK210 _________ EACH 0.00 __________


SOCK220 _________ EACH 0.00 __________


SOCK221 _________ EACH 21.38 __________

21 MM METRIC, 1/2" DRIVE 12 PT. DEEP SOCKET.

SNAP-ON #SM21 CHROME. MUST BE OF

SAME QUALITY FINISH, AND WARRANTY AS SNAP-ON

SOCK222 _________ EACH 19.50 __________

3/4", 1/2" DRIVE, 12 POINT DEEP CHROME SOCKET.

SNAP-ON #S241

SOCK223 _________ EACH 12.08 __________

1/8 MM, 1/2" DRIVE STANDARD 6-PT. CROME SOCKET.

SNAP-ON #TWM18



72 | P a g e

SOCK224 _________ EACH 18.94 __________

21 MM, 1/2" DRIVE 6 PT. DEEP IMPACT SOCKET.

SNAP-ON #SIMM210

SOCK225 _________ EACH 16.88 __________

19 MM, 1/2" DRIVE 6 PT. IMPACT SOCKET. SNAP-ON #SIMM190

SOCK226 _________ EACH 10.73 __________

1/2", 1/2" DRIVE STANDARD 6 PT. CHROME SOCKET.

SNAP-ON #TW161A

SOCK227 _________ EACH 7.20 __________

7/16", 1/4" DRIVE. 6 PT. STANDARD CHROME SOCKET.

SNAP-ON #TM14

SOCK228 _________ EACH 11.36 __________

1/4", 1/4" DRIVE 6 PT. DEEP CHROME SOCKET.

SNAP-ON #STM8

SOCK240 _________ EACH 0.00 __________

1/2" EXTENSION BARS 5/8" SHA LENGTHS 2" 3" 5" 10

SOCK250 _________ EACH 0.00 __________

3/8" EXTENSION BARS 13/32" & SHANK DIA. LENGTHS 1

SOCK260 _________ EACH 0.00 __________

LONG HANDLE 20 GEAR TOOTH HEAD 9/16" HEAD WIDTH 1 1/8

SOCK270 _________ EACH 30.19 __________

UNIVERSAL JOINT OUTSIDE DIA. 3/8" OVERALL LENGTH 1-15/16"

SNAP-ON NO. FU8A OR APPROVED EQUAL

SOCK271 _________ EACH 0.00 __________

UNIVERSAL JOINT 3/8" OUTSIDE 1 1/8" LONG SNAP-ON TMUB

SOCK272 _________ EACH 0.00 __________

UNIVERSAL JOINT 1/2" OUTSIDE 2 11/16" LONG SNAP-ON NO

SOCK273 _________ EACH 0.00 __________

UNVERISAL JOINT 3/4" OUTSIDE 3 7/8" LONG SNAP-ON

SOCK280 _________ EACH 0.00 __________

ADAPTOR HANDLE TO SOCKET SQUAR FEMALE END 3/4 IN TO MALE

SOCK290 _________ EACH 0.00 __________

ADAPTOR HANDLE TO SOCKET SQUAR FEMALE END 1/2 IN TO MALE

SOCK300 _________ EACH 3.85 __________

ADAPTOR HANDLE TO SOCKET SQUARE DRIVE 3/8 FEMALE

END 1/4 IN MALE END SNAP-ON OR APPROVED EQUAL

SOCK310 _________ EACH 5.15 __________

ADAPTOR HANDLE TO SOCKET SQUARE DRIVE FEMALE END

3/8 IN TO 1/2 IN MALE END SNAP-ON NO A-2

SOCK312 _________ EACH 0.00 __________

RATCHET ADAPTOR 3/8 DRIVEHANDL GEARTEETH 20 HEAD DEPTH



73 | P a g e

SOCK314 _________ EACH 0.00 __________

RATCHETING ADAPTOR CONVERTS 1/ TO A REVERSIBLE

SOCK320 _________ SET(S) 0.00 __________

TORX SQUARE DRIVE SET 3/8 IN D CONTAINING ONE T-40 ONE

SOCK330 _________ SET(S) 0.00 __________

TORX SQUARE DRIVE SET 1/4 IN D CONTAINING T-10 T-15 T-

SOCK340 _________ EACH 0.00 __________

UNIVERSAL JOINTS 3/8 IN DRIVE 1 15/16 IN SNAP-ON NO FU

SOCK350 _________ EACH 0.00 __________

REVERSIBLE RATCHETS 3/8 DRIVE LENGTH SNAP-ON NO F723

SOCK360 _________ EACH 0.00 __________

REVERSIBLE RATCHETS 1/2 DRIVE LENGTH SNAP-ON SL715 OR

SOCK370 _________ EACH 16.47 __________

FLEX HEAD HANDLES 3/8 DRIVE 11 1/2 LENGTH SNAP-ON NO F12L OR

EQUAL

SOCK380 _________ EACH 24.75 __________

FLEX HEAD HANDLES 1/2 DRIVE 18 LENGTH

SOCK390 _________ EACH 33.00 __________

LONG HANDLE RATCHET 20 GEAR TO DEPTH 3/8" WIDTH 27/16

SOCK398 _________ PAIR(S) 41.33 __________

3/4" DRIVE DRAG LINK SOCKETS D138 TO #GLD139 OR APPROVED EQ

SOCK400 _________ EACH 0.00 __________

FLEX-HEAD RATCHET 20 GEAR TOOT DEPTH 3/8" WIDTH 27/32

SOCK410 _________ EACH 15.50 __________

RATCHET GYRO FLEX HEAD DRIVE 3/8" HANDLE LENGTH

10 1/2 IN FOR USE WITH

SPARK PLUG SOCKETS. SNAP-ON F-731 OR

APPROVED EQUAL

SOCK420 _________ SET(S) 0.00 __________

1/4" METRIC SOCKET SET INCLUD DRIVER 6" BECKER BAR

SOCK430 _________ EACH 0.00 __________

SOCKET SPARK PLUG-UNIVERSAL DR IN

SOCK440 _________ EACH 0.00 __________

SOCKET SPARK PLUG UNIVERSAL DR IN SOCKET SIZE 13/16

SOCK450 _________ SET(S) 0.00 __________

HEX HEAD DRIVERS 3/8 DRIVE 1/8 DRIVERS SNAP-ON NO

SOCK460 _________ EACH 0.00 __________

IMPACT SOCKETS 3/8 DRIVE 6 PT 7/8") SNAP-ON #211GSFSY

SOCK461 _________ EACH 0.00 __________

IMPACT SOCKET 3/8 DRIVE 6 PT ( 1") SNAP-ON #212MFY



74 | P a g e

SOCK462 _________ EACH 0.00 __________

IMPACT SOCKETS3/8 DRIVE6 PT (8 SNAP-ON #2145MFMY

SOCK463 _________ EACH 42.36 __________

IMPACT EXTENSIONS 3/8 DRIVE (1 12"0 SNAP-ON #2041MX

SOCK464 _________ EACH 0.00 __________

IMPACT SOCKETS 1/2 DRIVE6 PT ( MM) SNAP-ON #31552MMYA

SOCK465 _________ EACH 0.00 __________

IMPACT SOCKETS 1/2 DRIVE 6PT ( MM) SNAP-ON #30551MMY

SOCK468 _________ EACH 15.38 __________

3/8" DRIVE 12 POINT UNIVERSAL ALLOW) SNAP-ON #FU18A OR APPRO

SOCK470 _________ BOX(S) 0.00 __________

SOCKET HEAD CAP SCREWS SIZE 3/ LONG

SOCK500 _________ SET(S) 89.90 __________

SOCKETS - BLACK HAWK 1/2" DRI NAL & METRIC SOCKET KIT) #1255

SOCK501 _________ SET(S) 85.95 __________

SOCKETS - BLACK HAWK 3/8" DRI NAL & METRIC KIT) #12598315 (2

SOCT010 _________ SET(S) 0.00 __________

1/2" DRIVE SOCET SET 8mm to 19mm ASSORTED FUSES

SOFT006 _________ EACH 825.62 __________

MODIS SOFTWARE #EEMS300E14IN NEWEST UPDATE FOR SNAP-ON MODIS ELITE

SOLD001 _________ EACH 0.00 __________

SOLDER 1 LB ROLL NO-CLEAN TYPE ALLOY 0.031" DIA KESTER #245

SPAP067 _________ PKG(S) 0.00 __________

SNAD PAPER FILE BOARD 2 3/4" 100 PER PACKAGE 40 GRIT

SPAP068 _________ PKG(S) 0.00 __________

SAND PAPER FILE BOARD 2 3/4" 100 PER PACKAGE 80 GRIT

SPNG004 _________ EACH 18.14 __________

HYDRA AQUA SPONGE, NO STREAKS OR WATER

STAINS DURING DRYING PROCESS, WON'T GROW MOLD,

USE ON ALL AUTOMOTIVE SURFACES,

PAXTON PATTERSON #42-2346 OR APPROVED EQUAL

SPRD004 _________ EACH 14.75 __________

PAD SPREADER, USED ON DOMESTIC, IMPORT

CARS & LIGHT TRUCKS WITH SINGLE PISTONS

DISC BREAKS WITHOUT PARKING BREAKS,

SNAP ON #YA2440 OR APPROVED EQUAL

SPRI007 _________ EACH 3.05 __________

SPRING DIVIDERS SIZE 4" DV4

SPRI008 _________ EACH 0.00 __________




75 | P a g e

SPRI009 _________ EACH 0.00 __________


SPRY011 _________ EACH 0.00 __________

HVLP "GRAVITY FEED" SPRAY GU CUZ 20 OZ NOZZLE SIZE 1.4

SPRY012 _________ EACH 0.00 __________

AIR PRESSURE REGULATORS FOR SP 1/4 NPT

SQRS010 _________ EACH 9.29 __________

TRY SQUARES 8" STANLEY 46-209 OR APPROVED EQUAL

SQRS020 _________ EACH 7.15 __________

FRAMING SQUARES 24 X 2 INCH BODY 16 X 1 1/2 INCH TONGUE,

STEEL, STANLEY #45910 OR APPROVED EQUAL

SQRS030 _________ EACH 0.00 __________

SQUARES TRY & MITRE 8" STANLE 46522 OR EQUAL

SQUA001 _________ EACH 6.35 __________

COMBINATION SQUARE, SNAP-ON

#PMF123 OR APPROVED EQUAL

STOR050 _________ EACH 0.00 __________

MILLING STORAGE MUST BE LISTA EL (TCC-23) 1350 (MSC #0006934

STOR055 _________ EACH 0.00 __________

PRECISION TOOL STORAGE MUST BE

AND MODEL (TCC-26) 1350 (MSC #

SUPP039 _________ EACH 0.00 __________

PLIERS MULTI-PURPOSE LENGTH -

SUPP040 _________ EACH 20.23 __________

WRENCH ADJUSTABLE LENGTH - 25 CM

SUPP139 _________ EACH 1.94 __________

RETRACTABLE BLADE KNIFE

SUPP144 _________ PAIR(S) 0.00 __________

SHEARS CUT LENGTH 5 10" OVERALL LENGTH

SUPP145 _________ PAIR(S) 0.00 __________

HEAVY DUTY SHEARS CUT LENGTH 3 12" OVERALL LENGTH

SUPP164 _________ EACH 0.15 __________

SINGLE EDGE RAZOR BLADES

SURF001 _________ EACH 0.00 __________

SURFACE PREP TOOL - AIR TOOL T

LD GASKET MATERIALS FROM ENGIN

SWAG001 _________ EACH 0.00 __________

RIDGID / SWAGING TOOL SET 4 PI

SWAGING SET 1/4 3/8 1/2

SWAG002 _________ EACH 0.00 __________

SWAGINE TOOL SET 1/4" 3/8" 1 RIDGID #570/52420



76 | P a g e

SWAG003 _________ EACH 0.00 __________

SWAGING TOOL 3/16-3/4 IMPERIAL #95-5

TAPE040 _________ EACH 9.95 __________

25 FT. MEASURING TAPE (STANLEY FAT MAX

TAPE W/ 1 1/4" BLADE WIDTH) (NO SUB)

TAPE916 _________ EACH 16.83 __________

TAPE, MEASURING - 30 FOOT X 1" WIDE BLADE. TO BE STANLEY

#33430 OR APPROVED EQUAL

TBDI040 _________ EACH 0.00 __________

TAPPLUG 1/4" X 28 T.P.I. N.C

TDIE001 _________ EACH 260.93 __________

TAP & DIE SET HIGH SPEED STEEL, RUST

RESISTANT INCLUDING AN ASSORTMENT

OF TAPS, DIES, AND ACCESSORIES IN THE MOST

NEEDED SIZES & MOLDED CASE, ONE SET STANDARD,

ONE SET METRIC

TEST002 _________ EACH 0.00 __________

INSULATION TESTER MODEL 1990

TEST003 _________ EACH 0.00 __________

TESTER PORTABLE STARTING CHARG

TESTER SNAP ON EECS301AX OR

TEST006 _________ EACH 0.00 __________

HUBBLE CIRCUIT TESTER

TEST007 _________ EACH 0.00 __________

DISCHARGE LAMP TESTER

TEST018 _________ EACH 0.00 __________

TESTER BATTERY CHARGER SNAP ON

MT3750KRBCA OR APPROVED EQUAL

TEST019 _________ EACH 0.00 __________

TESTER COMPUTER AND TERMINAL K

CCC/TBI/PFI COMPUTER TERMINAL

TEST022 _________ EACH 0.00 __________

TESTER IGNITION FOR HEI SYSTEM

SPARK WITHOUT REMOVING THE

TEST023 _________ EACH 125.51 __________

TESTER COOLING SYSTEM TEST PRESSURE CAP AND COOLING

SYSTEMS FOR LEAKS. COMPLETE KIT

IN A PLASTIC BOX. SNAP-ON #SVTS262 OR APPROVED

EQUAL

TEST040 _________ EACH 0.00 __________

INDIVIDUAL LIGHT TESTERS

TEST045 _________ EACH 0.00 __________

TESTER VOLTAGE-WITH PROBES USE TEST ALL TYPES OF RECEPTACLES



77 | P a g e

TEST046 _________ EACH 0.00 __________

TESTER VOLTAGE. TO BE SQD 6610 APPROVED EQUAL

TEST058 _________ EACH 675.00 __________

DIESEL FUEL INJECTOR NOZZLE TE 4200 SNAP-ON #YA600A OR APPROV

TGUA001 _________ EACH 0.00 __________

TOE GUARDS 16 GAGE CARBON STEE WITHSTANDS 75 FOOT LBS. FITS

THER033 _________ EACH 167.95 __________

INFARED THERMOMETER SNAP-ON #R TEMP30PB 8 PT CIRCULAR LASER,

TEMP RANGE - 25 DEGREES TO 950 DEGREES INCLUDES: W

RIST STRAP, CADE, & CONTACT PROBE FEATURES INCLUDE

: DISPLAY, HOLD, LCD BACKLIGHT AND CLASS II LASER

PR APPORVED EQUAL

THGA010 _________ EACH 4.07 __________

THICKNESS GAGE 26 LEAVES 3 1/2 .0015 TO .025 #230

THIN003 _________ EACH 0.00 __________

DTL 16 LAQUER THINNER 16 GAL D NO SUB

THRD110 _________ EACH 99.35 __________

THREADING TOOL - MUST BE STELL FNSR-123B

THRD111 _________ EACH 10.65 __________

THREADING INSERTS - MUST BE VA VLT3R VC901

THRD203 _________ EACH 15.03 __________

THREAD/GROOVING HOLDERS QIA CM 75 CLAMP

THRD204 _________ EACH 0.57 __________

STELLRAM QIA 36-32 X 1/2 SHCS

TIME024 _________ EACH 250.69 __________

TIME RECORDER GRAINGER #4TH70

AUTOMATICALLY ADVANCES YEAR, DATE, MONTH

TIRE015 _________ EACH 450.00 __________

TRUCK TIRE BEAD SEATER SYSTEM

INCLUDES: 50984 HOSE & VALVE ASSEMBLY,

50987 RING 22.5" TO 24.5", 50996 SURGE TANK

(INCLUDES 200 LB. PRESSURE GUAGE 50997 & 50998

165 LB. SAFETY VALVE)

TIRE019 _________ EACH 4.75 __________

TIRE LETTERING STICK, COLOR =

WHITE, TRUE FLITE #17235

TKNF010 _________ EACH 2.97 __________

PUTTY KNIFE STIFF BLADE, BLADE LENGTH

3 3/4", BLADE WIDTH 1 1/4" , OVERALL

LENGTH 7-1/4", STANLEY MFG. #28-140

OR APPROVED EQUAL

TLBT010 _________ EACH 0.00 __________

TOOL BITS HIGH SPEED STEEL REX 3/16 IN SQ



78 | P a g e

TLBT020 _________ EACH 0.00 __________


TLBT030 _________ EACH 0.00 __________


TLBT040 _________ EACH 0.00 __________


TLBT050 _________ EACH 0.00 __________


TLBT060 _________ EACH 0.00 __________

TOOL BITS HIGH SPEED STEEL REX 5/8 IN

TLBT070 _________ EACH 1.20 __________

CARBIDE TOOL BITS 1/4 IN SHANK L.H. 10-6

TLBT080 _________ EACH 0.00 __________

CARBIDE TOOL BITS 1/4 IN SHANK R.H. 10-6

TLBT090 _________ EACH 1.20 __________

CARBIDE TOOL BITS 1/4 IN SHANK

TLBT100 _________ EACH 0.80 __________

CARBIDE TOOL BITS 5/16 IN SHAN GRADE 1C-6

TLBT110 _________ EACH 0.80 __________


TLBT120 _________ EACH 0.75 __________


TLBT130 _________ EACH 1.60 __________

CARBIDE TOOL BITS 1/2 SHANK AL GRADE 1C-6

TLBT140 _________ EACH 1.60 __________

CARBIDE TOOL BITS 1/2 IN SHANK GRADE 1C-6

TLBT150 _________ EACH 1.60 __________


TLBT160 _________ EACH 0.00 __________


TLBT170 _________ EACH 0.00 __________

CARBIDE TOOL BITS 5/8 IN SHANK RH GRADE 1C-6

TLBT180 _________ EACH 0.00 __________

CARBIDE TOOL BITS 5/8 IN D-10 1C-6

TLBT190 _________ EACH 0.00 __________


TLBT200 _________ EACH 0.00 __________




79 | P a g e

TLBT210 _________ EACH 0.00 __________


TLBT220 _________ EACH 0.00 __________

INDEXABLE CARBIDE INSERTS STYL GRADE C6 GENERAL PURPOSE

TOOL002 _________ EACH 48.12 __________

T45A - STYLE TUBELESS TIRE MOU (TOOL 38" LONG 3/4" DIA. 5

TOOL004 _________ EACH 1.08 __________

TOOL, VALVE CORE STEM TOOL, SNAP-ON #GA143A OR APPROVED EQUAL

TOOL005 _________ EACH 45.47 __________

AIR CUT OFF TOOL - 22000 RPM 1/4" INLET CENTRAL PNEUMATIC

TOOL006 _________ EACH 0.00 __________

KNURLING TOOL SCISSOR TYPE 3/4 NK E-3/4" X 3/8" X 1/4" KNU

TOOL014 _________ EACH 0.00 __________

RIVET TOOL (MARSON #6A644) OR APPROVED EQUAL

TOOL022 _________ EACH 0.00 __________

ENGINE TURNING TOOL SNAP-ON #Y OR OTC #7161 OR APPROVED EQUAL

TOOL023 _________ EACH 0.00 __________

WHEEL WEIGHT PLIERS LARGE TRUC INSTALLATION TOOL IMPERIAL

TOOL024 _________ EACH 0.00 __________

TRUCK CLUTCH ALIGNMENT TOOL OT 2" O.D. 1-1/4" PILOT

TOOL026 _________ EACH 0.00 __________

PRO-LINK SCAN TOOL HEAVY DUTY KIT PN: 608000

TOOL027 _________ SET(S) 3,554.10 __________

SNAP-ON TOOL SET #9200AGSO MASTER TECH STARTER SET

(STUDENT PROG.) A WELL BALANCED SELECTION

OF 1/4", 3/8", AND 1/2" SQUARE DRIVE TOOLS.

ALSO INCLUDES MANY OF THE NEEDED WRENCHES,

SCREWDRIVERS, PLIERS, PUNCHES AND CHISELS USED BY

TODAY'S TECHNICIANS.

TOOL028 _________ EACH 2,200.00 __________

FRONT END ALIGNMENT TOOLS FOR HD

TRUCK WITH 22.5 & 24.5 WHEELS

INCLUDES THE FOLLOWING: CENTER WHEEL MOUNT

(BEELINE #19048), CASTER CHAMBER GAUGES

(BEELINE # 19305), TRUCK TIRE TOE GUAGE (MYERS

TIRE #03434 MFG #2645), TIRE SCRIBE (MYERS TIRE

#72169 MFG #WA0516), EXTRA HEAVY DUTY TURNTABLE

SET (MYERS TIRE # 03093 MFG #WA100)

TOOL030 _________ EACH 217.91 __________

13 PIECE TORX SOCKET SET (T8 - T60) 3/8' DRIVE

TOOL031 _________ EACH 1.61 __________

TURNING TOOL SCREW (CARMEX MFG. #S06) OR APPROVED EQUAL



80 | P a g e

TOOL042 _________ EACH 0.00 __________

PRO-LINK SCAN TOOL CATRIDGE PA FOR DDEC 11 & 111 OR APPROVED

TOOL043 _________ EACH 72.48 __________

PRECISION SQUARE ADJUSTABLE 18 CHROME FINISH STARRETT #11H S

TOOL044 _________ EACH 221.88 __________

DIAL CALIPER 0-12" 0.100" PE OLUTION WITH WOODEN CASE STA

TOOL045 _________ EACH 228.52 __________

DIAL CALIPER 0-6" 0.100" PER DIAL REVOLUTION, W/

WOODEN CASE, STARRETT PART #12OZ012,

MSC ORDER # 58695560 (NO SUBSTITUTIONS)

TOOL048 _________ EACH 0.00 __________

#7306SB GREENLEE TOOL KNOCK OU 2'

TOOL056 _________ EACH 26.72 __________

RIDGID TUBING CUTTER GRAINGER #5A193 OR APPROVED EQUAL

TOOL057 _________ EACH 0.00 __________

RIDGED FLARING CUTTER CATALOG 0

TOOL058 _________ EACH 0.00 __________

SCREW EXTRACTOR SET (GRAINGER 8) OR APPROVED EQUAL

TOOL059 _________ EACH 0.00 __________

TAP & DIE SET (GRINGER ITEM #6 PPROVED EQUAL

TOOL060 _________ EACH 0.00 __________

PIPE WRENCH SET (2 PIECE) - GR M #4PL94 OR APPROVED EQUAL

TOOL061 _________ EACH 266.60 __________

OTC DIRECT REPLACEMENT RAM FOR

FRAME MACHINED THREADED ON

TOP AND BOTTOM FOR 10 TON APPLICATION 6" STROKE

BACKED BY OTC LIFETIME WARRANTY PART# 5658

MODEL# 4104 AUTOBODY TOOL MART CO. NUMBERS

TOOL100 _________ EACH 24.95 __________

SWAGING TOOL SET "RIDGID" MO 52420 4A523 NO SUBSTITUTE

TOOL220 _________ EACH 49.11 __________

11" - 4 WATT - 50' DROPLIGHT FLUORESCENT

TOOL226 _________ EACH 21.48 __________

SCREWDRIVER SET MINI ORANGE HA AP-ON ORDER #SDDX40O (NO SUBS)

TOOL227 _________ SET(S) 21.54 __________

SCREWDRIVER SET COMBINATION ORANGE HANDLE

SNAP-ON ORDER #SDD40O (NO SUBS)

TOOL228 _________ SET(S) 101.46 __________

SCREWDRIVER SET TORX YELLOW HANDLE (SNAP-ON #SDTX90Y)

NO SUBS

TOOL229 _________ EACH 12.69 __________

HOOK & AWL SET MINI ORANGE HANDLE SNAP-ON ORDER #ASA105AO (NO SUBS)



81 | P a g e

TOOL230 _________ SET(S) 30.84 __________

HEX DRIVER SET ENGLISH, BALL TYPE,

BLACK HANDLE, SNAP-ON #SDAB113 (NO SUBSTITUTES)

SNAP-ON ORDER#SDAB113 - NO SUBS

TOOL231 _________ EACH 12.00 __________

SCREWDRIVER, ALL-IN-ONE, KLINE MFG. #32477 (NO SUBS.)

TOOL232 _________ EACH 0.00 __________

SOCKETS SET 13-PIECE 1/4" DRI MFG. ITEM# 65500 (NO SUBS.)

TOOL233 _________ EACH 26.95 __________

SCREWDRIVER SET PHILLIPS XCELI #XST-5 (NO SUBS.)

TOOL234 _________ EACH 24.00 __________

SCREWDRIVER SET INCH SIZES COM ELITE #PS-7 (NO SUBS)

TOOL235 _________ SET(S) 28.19 __________

NUTDRIVER SET - INCH SIZES COMPACT XCELITE PART

#PS-120 - NO SUB.

TOOL236 _________ EACH 37.00 __________

NUTDRIVER SET METRIC SIZES COM ELITE PART #PS121MM (NO SUBS.)

TOOL237 _________ SET(S) 23.72 __________

SCREWDRIVER & TAMPERPROOF BIT SET, KLINE TOOLS

INC MAGNETIC, 32-PIECE SET, MFG. = KLINE #32510,

INCLUDES TORX R HEX, TAMPER SPANNER, TRI-WING*R,

TORQ-SET*R, & 1/4" SOCKET ADAPTER, CUSHION GRIP

HANDLE, HOME DEPOT SUPPLY #300902

TORH010 _________ EACH 0.00 __________

TURBO TORCH KIT W/ GAUGES & HO FOR BRAZING

TORH019 _________ KIT(S) 0.00 __________

BERNZOMATIC*R QUICKFIRE*T PLUM BER'S KIT - INCLUDES TRIGGER S

TART TORCH, 14.1 OZ PROPANE CYLINDER, LEAD-FREE SO

LDER, FLUX, FLUX BRUSH, SANDPAPER, PIPE CUTTER AND

CASE

TORH020 _________ EACH 0.00 __________

PROSTOLITE TORCH KIT W/GAUGES TIPS FOR BRAZING

TORQ003 _________ EACH 218.66 __________

GEARED HEAD TORQUE MULTILIER C 80 SNAP-ON GA184A *4 TO 1 RATI

TPRL021 _________ EACH 8.75 __________

RULE TAPE STANLEY #226503 (12')

TPRL022 _________ EACH 8.78 __________

12' TAPE MEASURE (SNAP-ON ITEM

#YASG153 OR APPROVED EQUAL)

TPRL050 _________ EACH 8.43 __________

RULE TAPE, 50' LENGTH, WIDTH 3/8"

LUFKIN #W223 OR APPROVED EQUAL



82 | P a g e

TPRL060 _________ EACH 18.38 __________

STEEL TAPE, (100', 3/8" WIDTH),

LUFKIN #HW 226 OR APPROVED EQUAL

TPRL070 _________ EACH 0.00 __________

MASON'S STEEL SPACING TAPE

TSET002 _________ SET(S) 58.10 __________

C/L 118 DEG JOBBER (25 PIECE SET) 1 TO 13 X 1/2 MM

TURN004 _________ EACH 54.95 __________

TURNING KIT, INDEXABLE, 3/8" ENCO


TURN006 _________ EACH 59.95 __________

TURNING KIT, INDEXABLE, 1/2" ENCO


TYDI160 _________ EACH 0.00 __________

DIEHEXAGON1" DIA.3/8" X 16 T

VACO001 _________ EACH 0.00 __________

KLIEN / VACO SUPER KIT : STOCK 946139 NO SUB

VACU009 _________ EACH 564.83 __________

VACCUM 23 GAL WET DRY VACCUM S YA1023

OR APPROVED EQUAL

VACU010 _________ EACH 0.00 __________

VACUUM WET/DRY - POWER TOOL DR 7800

SANDER 9 AMP MOTOR. 123

VACU011 _________ EACH 293.80 __________

VACUUM CLEANER, WET/DRY POLY-TANK-120 VOLTS, 9.5 AMP.

1-STAGE BYPASS MOTOR, 159 CU FT/MIN., MAX AIR

FLOW. INCLUDES 7' X 1 1/2" HOSE, 1 1/2" CONVERSION

INIT, VAC DOLLY, TOOL BASKET, CARTRIDGE

FILTER AND FILTER BAG. TO BE MILWAUKEE #8936-20

OR APPROVED EQUAL

VACU110 _________ EACH 0.00 __________

20 GALLONG INDUSTRIAL WET/DRY 40 HP. INCLUDES 1 1/4" X 7

VALV007 _________ EACH 0.00 __________

HD DIESEL ENGINE VALVE SPRING INCLUDE CALIBRATED SPRING FOR

VAPU010 _________ EACH 0.00 __________

VACUUM PUMP AND GAUGE GAUGE RE TESTS SUPPLIES OUTSIDE

VBIK001 _________ EACH 0.00 __________

V-BLOCK AND CLAMP BLOCK IS 1 7 BASE LENGTH 3 1/2

VGRP010 _________ EACH 9.64 __________

VISE GRIP LONG NOSE LOCKING PLIER

6LN OR APPROVED EQUAL

VGRP020 _________ EACH 0.00 __________

VISE GRIP LOCKING PLIER 10CR O



83 | P a g e

VGRP030 _________ EACH 10.00 __________

VISE GRIP, LOCKING PLIER, 7CR OR

APPROVED EQUAL

VGRP040 _________ EACH 9.72 __________

VISE GRIP, LOCKING PLIER, 10 CR

OR APPROVED EQUAL

VGRP050 _________ EACH 9.20 __________

VISE GRIP, LOCKING PLIER, 7 R OR

APPROVED EQUAL

VGRP060 _________ EACH 0.00 __________

VISE GRIP LOCKING C CLAMP 18R

VGRP070 _________ EACH 0.00 __________

VISE GRIP LOCKING C CLAMP 11R

VGRP080 _________ EACH 8.80 __________

VISE GRIP, LOCKING C CLAMP, 6 R OR APPROVED EQUAL

VGRP090 _________ EACH 0.00 __________

VISE GRIP CHAIN CLAMP 20R OR E

VGRP100 _________ EACH 0.00 __________

VISE GRIP PINCH OFF TOOL OR EQ

VGRP110 _________ EACH 20.00 __________

VISE GRIP SHEET METAL TOOL

VISE003 _________ EACH 0.00 __________

VISE MACHINIST'S VISE MSC 0067 OR SATCO NB56-2468115 OR EQUAL

VISE004 _________ EACH 130.00 __________

VISE 2 PIECE MILLING MACHINE 6 ENCO PART # 425-4724

VISE005 _________ EACH 95.25 __________

VISE BENCH MOUNTED 5" W/ ANVIL & REPLACEABLE JAWS

VISE007 _________ EACH 42.00 __________

VISE PRECISION TOOLMAKERS 2-3/ WIDTH 2-316 JAW OPENING WITH

VISE008 _________ EACH 351.75 __________

VISE PRECISION MACHINE VISE KU ANGLELOCK MODEL #D688

VISE013 _________ SET(S) 32.73 __________

VISE JAW PADS (CAPS) SNAP-ON W FACED 6" OR APPROVED EQUAL

VISE014 _________ EACH 24.57 __________

6" HARDENED & GROUND JAW, MSC#09211368, MFG. KURT #D60-7

NO SUBSTITUTE

WDRY005 _________ SLEEVE(S) 0.00 __________

3M TMPERIAL WET OR DRY 5 1/2 X MICRO FINE 1000 GRITS 50

WEDG100 _________ SET(S) 4.06 __________

JACOBS REMOVAL WEDGE SET NO. 2 (2 PIECE SET)



84 | P a g e

WEDG101 _________ SET(S) 3.87 __________

JACOBS REMOVAL WEDGE SET NO. 3 (2 PIECE SET)

WELD010 _________ KIT(S) 1.71 __________

WELDING KITS HEAVY DUTY SINGLE GULATOR 2 1/2" DIAM. GAUGES.

WIGG002 _________ EACH 17.43 __________

STARRETT WIGGLER 828A

EDGE CENTER FINDER KITS-LAYOUT & SETUP TOOLS TYPE:

SHANK WITH POINT, LENGTH: CLOSED-2-3/8 IN,

OPEN-4-1/8 IN, END TYPE: SINGLE, STYLE: MECHANICAL

WIND002 _________ EACH 51.60 __________

SANDBLASTER WINDOW REPLACEMENT GLASS

FOR SNAP-ON SANDBLASTER MODEL #YA437

SNAP ON # YAD004

WRBR001 _________ EACH 17.82 __________

WIRE BRUSHER STAINLESS STEEL

WRBR010 _________ EACH 1.40 __________

BRUSHES, SCRATCH 3 X 19 ROW WIRE BRUSH LONG BENT WOOD

HANDLE, AIRCO #1329-0203 OR APPROVED EQUAL

WRCH001 _________ EACH 0.00 __________

1" DRIVE LONG ANVIL IMPACT WR

(SNAP-ON #AT1125DL OR APPROVED

WRCH002 _________ EACH 0.00 __________

WRENCH COMBO (12 PIECES) W/ PO

(68404) OR APPROVED EQUAL

WRCH003 _________ EACH 0.00 __________

COMBINATION WRENCH -SHORT 1/2

(SNAP-ON #0EX160) OR APPROVED

WRCH004 _________ EACH 0.00 __________

COMBINATION WRENCH - 12 MM SHO

(SNAP-ON #0EMX12) OR APPROVED

WRCH005 _________ EACH 0.00 __________

OPEN END WRENCH -(5/16"-11/32

(SNAP-ON #J2022A) OR APPROVED

WRCH006 _________ EACH 0.00 __________

OPEN END WRENCH (3/16" - 7/32

(SNAP-ON #J1214A) OR APPROVED

WRCH007 _________ EACH 0.00 __________

BOX END WRENCH (15MM - 16MM)

(#XSM1516) OR APPROVED EQUAL

WRCH008 _________ EACH 0.00 __________

COMBINATION WRENCH (16MM) LONG

(SNAP-ON #0EXM160) OR

WRCH009 _________ EACH 0.00 __________

COMBINATION WRENCH (11MM) SHOR (SNAP-ON #0EXM11) OR APPROVED



85 | P a g e

WRCH010 _________ EACH 0.00 __________

AJUSTABLE WRENCHES 4" CRESCEN

WRCH011 _________ EACH 0.00 __________

WRENCH VALVE ADJUSTING WRENCH

M1322 OR APPROVED EQUAL

WRCH012 _________ EACH 0.00 __________

WRENCH AIR COMP/FUEL PUM SNAP

M1328A OR APPROVED EQUAL

WRCH013 _________ EACH 0.00 __________

WRENCH AIR COMP/FUEL PUMP SNAP

M1321 OR APPROVED EQUAL

WRCH015 _________ EACH 0.00 __________

WRENCH 3/8" DR SWIVEL HEAD TO

WRENCH SNAP ON QC2FR75 OR

WRCH016 _________ EACH 0.00 __________

COMBINATION WRENCH - 10MM SHOR

(SNAP-ON #0EXM10) OR APPROVED

WRCH020 _________ EACH 2.24 __________

ADJUSTABLE WRENCHES6" CRESCEN

WRCH025 _________ SET(S) 207.11 __________

BONNIE ("3/8 - 1 1/4") COMBINATION WRENCH

WRCH026 _________ EACH 15.00 __________

12" ADJUSTABLE WRENCH

WRCH027 _________ EACH 59.36 __________

18" ADJUSTABLE WRENCH SNAP-ON

#GAT 18 OR APPROVED EQUAL

WRCH030 _________ EACH 7.88 __________

ADJUSTABLE WRENCHES8" CRESCEN

WRCH035 _________ EACH 0.00 __________

WRENCH TORQUE 3/4" DR QC4R600

OR APPROVED EQUAL

WRCH040 _________ EACH 8.40 __________

ADJUSTABLE WRENCHES10" CRESCE EQUAL

WRCH050 _________ EACH 5.77 __________

ADJUSTABLE WRENCHES12" CRESCE EQUAL

WRCH060 _________ EACH 30.49 __________

ADJUSTABLE WRENCHS14" CRESCEN

WRCH130 _________ EACH 0.00 __________

STARBUCK NO 758 RADIATOR SPUD OR EQUAL NIPPLE

WRCH140 _________ SET(S) 0.00 __________

METRIC WRENCHES STANDARD LENGT

8MM TO 32MM (23PCS) SET



86 | P a g e

WRCH141 _________ EACH 4.15 __________

WRENCH COMBINATION7M SNAP-ON O

WRCH142 _________ EACH 0.00 __________

WRENCH COMBINATION 8M SNAP-ON EQUAL

WRCH143 _________ EACH 0.00 __________


WRCH144 _________ EACH 14.34 __________

WRENCH COMBINATION 10M SNAP-ON

OR APPROVED EQUAL

WRCH145 _________ EACH 0.00 __________


WRCH146 _________ EACH 0.00 __________


WRCH147 _________ EACH 15.30 __________

WRENCH COMBINATION 13M SNAP-ON OR APPROVED EQUAL

WRCH150 _________ EACH 145.00 __________

WRENCH SET BOX METRIC 10-19MM OR APPROVED EQUAL

WRCH200 _________ EACH 0.00 __________

OPEN END WRENCH STANDARD HANDL 5/16" SIZE 4" LENGTH SNAP

WRCH210 _________ EACH 0.00 __________

OPEN END WRENCH STANDARD HANDL 3/8 SIZE 4 5/8" LENGTH

WRCH220 _________ EACH 0.00 __________

OPEN END WRENCH STANDARD HANDL 7/16" SIZE 5 1/4" LENGTH

WRCH230 _________ EACH 0.00 __________

OPEN END WRENCH STANDARD HANDL INCH SIZE 5 7/8 LENGTH

WRCH240 _________ EACH 0.00 __________

OPEN END WRENCH STANDARD HANDL SIZE 6 1/2" LENGTH SNAP-

WRCH250 _________ EACH 0.00 __________

OPEN END WRENCH STANDARD HANDL 5/8" SIZE 7 1/16" LENGTH

WRCH260 _________ EACH 0.00 __________

OPEN END WRENCH STANDARD HANDL 13/16 SIZE 9 1/4" LENGTH

WRCH270 _________ EACH 0.00 __________

OPEN END WRENCH SIZE 15/16 7/8 LENGTH SNAP-ON NO.V02830

WRCH280 _________ EACH 0.00 __________

OPEN END WRENCHES SHORT HANDLE SET SNAP-ON NO. J805A OR

WRCH300 _________ EACH 0.00 __________

COMBINATION WRENCH SHORT HANDL SIZE SNAP-ON NO. OEY240A

WRCH310 _________ EACH 7.89 __________

COMBINATION WRENCH, LONG HANDLE, 9/16, SNAP-ON #SOEX18 OR APPROVED EQUAL



87 | P a g e

WRCH312 _________ SET(S) 251.90 __________

SET OF COMBINATION WRENCHES (INDUSTRIAL FINISH)

TO INCLUDE "ONLY" FOLLOWING SIZES

1-3/16", 1-1/4", 1-5/16", 1-3/8" 1-7/10",

1-1/2", 1-5/8", 12 PT ONLY OR APPROVED EQUAL

SNAP ON #'S GOEX38B TO GOEX52B

WRCH320 _________ EACH 7.24 __________

COMBINATION WRENCH, LONG HANDLE, 1/2, SNAP-ON #OEX16 OR APPROVED EQUAL

WRCH330 _________ SET(S) 0.00 __________

COMBINATION WRENCH 12PT 3/8 TO STANDARD HANDLE SNAP-ON

WRCH340 _________ SET(S) 0.00 __________

COMBINATION WRENCHS 6PT 3/8 TO

WRCH350 _________ EACH 0.00 __________

COMBINATION WRENCH MIDSET HAND SIZE 3 7/8 LENGTH SNAP-ON

WRCH351 _________ EACH 0.00 __________

COMBINATION WRENCH MIDSET HAND 5/16 SIZE 3 15/32 LENGTH

WRCH352 _________ EACH 0.00 __________

SHORT HANDLE 12PT 5/16 SIZE CO WRENCH SNAP-ON NO OEX 100

WRCH353 _________ EACH 0.00 __________

COMBINATION WRENCH SHORT HANDL 7/16 SIZE 5 7/16 LENGTH

WRCH354 _________ EACH 0.00 __________

COMBINATION WRENCH SHORT HANDL 1/2" SIZE 5 3/4" LENGTH

WRCH355 _________ EACH 0.00 __________

COMBINATION WRENCH SHORT HANDL 9/16" SIZE 6" LENGTH SNAP

WRCH356 _________ EACH 0.00 __________

COMBINATION WRENCH SHORT HANDL SIZE 6 5/16 LENGTH SNAP-

WRCH360 _________ EACH 0.00 __________

COMBINATION WRENCH 12 PT 1 1/8 LENGTH 15 7/8 SNAP ON

WRCH370 _________ EACH 0.00 __________

OFFSET BOX WRENCH STANDARD 10 PT. SIZE 3/8" -7/16

WRCH371 _________ EACH 0.00 __________

OFFSET BOX WRENCH STANDARD 10 OFFSET 12PT COMPLETE SET

WRCH372 _________ EACH 0.00 __________

SPEEDER WRENCH SHANK DIA. 13/3 LENGTH 8 1/2" SWEEP

WRCH373 _________ EACH 0.00 __________

OFFSET BOX WRENCH STANDARD 10 OFFSET 6PT SIZE 7/16 1/2

WRCH374 _________ EACH 0.00 __________

OFFSET BOX WRENCH STANDARD 10 OFFSET 6PT SIZE 1/2-9/16

WRCH375 _________ EACH 0.00 __________




88 | P a g e

WRCH376 _________ EACH 0.00 __________


WRCH380 _________ EACH 0.00 __________

COMBINATION OPEN END & FLARENU SIZES 5/16-13/16 SNAP-ON

WRCH382 _________ EACH 6.49 __________

SWIVEL-GRIP TRUCK OIL FILTER W 00 (FOR CUMMINS AND DETROIT DI

WRCH383 _________ EACH 7.15 __________

SWIVEL- GRIP TRUCK OIL FILTER 300 (FOR CATERPILLAR ENGINES)

WRCH400 _________ EACH 0.00 __________

LUG WRENCH- 23" LONG SIZES 3/ 7/815/16 BG NO 506699 OR

WRCH410 _________ EACH 0.00 __________

LUG WRENCH METRIC TYPE 15" LO MM 18MM 19MM 21MM BG

WREN001 _________ EACH 105.99 __________

WRENCH, COMBO, 12 PCS. WITH POUCH MFG. = KLEIN, #68804, (NO SUB)

WREN002 _________ EACH 0.00 __________

WRENCH ADJUSTABLE PLASTIC HAND MFG. PART# HD-506-10

WREN003 _________ EACH 0.00 __________


WREN004 _________ EACH 0.00 __________


WREN005 _________ EACH 0.00 __________


WREN007 _________ EACH 5.65 __________

WRENCH GM BATTERY TERMINAL RAT BOX WRENCH USED FOR GM SIDE TE

WREN008 _________ EACH 0.00 __________

WRENCH 3/8" COMPACT IMPACT WR SNAP-ON #1M32

WREN010 _________ SET(S) 0.00 __________

ALLEN WRENCH

WREN011 _________ EACH 0.00 __________

WRENCH RATCHETING BAR WRENCH OFFSET 5/16" - 11/32" SNAP-O

WREN012 _________ EACH 0.00 __________

WRENCH RATCHETING BOX WHEEL OF 3/8" 7/16" SNAP ON # RYA1214

WREN013 _________ EACH 0.00 __________

WRENCH RATCHETING BOX WRENCH O 5/8" 11/16" SNAP ON #RYA2022

WREN014 _________ EACH 0.00 __________

WRENCH RATCHETING BOX WRENCH O 3/4"-7/8" SNAP-ON #RYA2428

WREN015 _________ EACH 0.00 __________

WRENCH BASKET STRAINER



89 | P a g e

WREN017 _________ EACH 0.00 __________

WRENCH OPEN ENDED WRENCH SIZE 7/32" SNAP ON #J1214A

WREN018 _________ EACH 0.00 __________

WRENCH BOX END SIZE 1/2" - 9/ SNAP ON #XO1618 NO SUBSTITUTE

WREN019 _________ EACH 0.00 __________

WRENCH COMBINATION SIZE 3/8" OX112SB NO SUBSTITUTE

WREN021 _________ EACH 0.00 __________

MIDGET COMBINATION WRENCH SET SNAP-ON #OX1709SBK

WREN022 _________ EACH 0.00 __________

MIDGET COMBINATION WRENCH SET NAP-ON #OX1M706B

WREN023 _________ EACH 0.00 __________

COMBINATION WRENCH SET ENGLISH #OEX711K

WREN024 _________ EACH 0.00 __________

COMBINATION WRENCH SET METRIC #OEXM713K

WREN025 _________ EACH 28.25 __________

WRENCH SPUD - 12" LONG - 3/8" CAPACITY

WREN026 _________ EACH 0.00 __________

WRENCH 8" ADJUSTABLE. TO BE K #D506-8 OR APPROVED EQUAL

WREN027 _________ EACH 0.00 __________

WRENCH 10" ADJUSTABLE. TO BE #D596-10 OR APPROVED EQUAL

WREN028 _________ EACH 0.00 __________

WRENCH 12" ADJUSTABLE. TO BE #D506-12 OR APPROVED EQUAL

WREN029 _________ SET(S) 0.00 __________

FLARE NUT WRENCHES. DOUBLE END METRIC 6-POINT (6PCS)

WREN030 _________ EACH 23.95 __________

WRENCH, COMBINATION, 7/16", 12-POINT,

CHROME FINISH, 7-1/4" LONG,

SNAP ON #OEX14B (NO SUBSTITUTE)

WREN031 _________ EACH 6.95 __________

FUEL TANK LOCK RING WRENCH, FORD FUEL SERVICE TOOL, PART #OTC-4624

WREN032 _________ EACH 41.36 __________

FUEL TANK LOCK RING WRENCH #OTC 6599

WREN035 _________ EACH 215.15 __________

1/2" IMPACT WRENCH 1M6/00 (SNAP-ON

OR APPROVED EQUAL)

WREN040 _________ EACH 0.00 __________

SWIVEL GRIP OIL FILTER WRENCH BROADHEAD GARRET - B359012 OR

WREN041 _________ EACH 0.00 __________

SWIVEL GRIP OIL FILTER WRECNCH BROADHEAD GARRET - B359845 OR



90 | P a g e

WREN042 _________ EACH 0.00 __________

9PC 1/4-3/4" COMBO WRENCH SET BROADHEAD GARRET - B380982 OR

WREN043 _________ EACH 0.00 __________

TOURQUE WRENCH 1/2" DRIVE - B GARRET - B417974 OR APPROVED

WREN045 _________ EACH 0.00 __________

WRENCH 7 MM (12012 101) OR APP EQUAL

WREN046 _________ EACH 0.00 __________

WRENCH OXYGEN SENSOR SERVICES CONTROLLED VEHICLE SYSTEM

WREN047 _________ EACH 0.00 __________

WRENCHHEATED OXYGEN SENSOR ACC CONNECTORS ON HEATED OXYGEN

WREN048 _________ EACH 0.00 __________

WRENCH 4 WHEEL DRIVE SPINDLE N WRENCH REMOVES SPINDLE NUTS ON

WREN055 _________ SET(S) 68.85 __________

WRENCH SET, OIL FILTER, 7 PIECES, COVERS 95% OF

ALL DOMESTIC, IMPORT, & LIGHT TRUCK OIL FILTERS,

SNAP ON #FWK7A OR APPROVED EQUAL

WSCL010 _________ EACH 0.00 __________

WATER SOLUBLE COOLANT NUMBER 0 MANHATTAN SUPPLY CO 5 GAL

hazleton area high schooldate: 10/06/2011 hazleton area school district bid catalog 190 (2012-2013)...

Documents