harvest chairback
TRANSCRIPT
7/30/2019 Harvest Chairback
http://slidepdf.com/reader/full/harvest-chairback 1/1
©2004 Cranston Print Works CompanyPrinted in U.S.A. on imported fabric.
Harvest/Halloween Reversible Chair Back
Cranston Customer ServiceVisit our website at:
www.CranstonVillage.com
While all possible care has been taken to ensure theaccuracy of this pattern, we are not responsible for printing
errors or the way in which individual work varies.
Materials Needed
Approx. 3/4 yd/chair *V.I.P® by Cranston® Harvest Bouquet 61431-MApprox. 1/2 yd/chair *V.I.P® by Cranston® Halloween 61424-Y2 – 3/4" self covered buttons
Instructions
1. To measure the top of your chair place paper on the floor and lay the chair over the paper.
2. Trace around the chair back to create a pattern that will fit your chair. Add 1/2 " seam allowance. *You may need more yardage depending on the size of your chair.
3. Cut 2 pieces of the Halloween fabric
4. Cut 2 full pieces of the Harvest Bouquet.
5. Cut another 1/2 piece of Harvest Bouquet adding 2" to center line for the right side overlap (for faux buttonhole placket).
6. Right sides together, stitch the Halloween pieces leaving bottom open. Turn and press seam allowance under.
7. Turn the left edge of the half piece under 2" folding raw edge under. Top stitch, catching edge. This makes the faux buttonhole placket.
8. Place the 1/2 piece over 1 full piece – both right sides facing you. Place the back full piece, right side in. Pin. Stitch the 3 pieces together leaving the bottom
open. Turn and press seam allowance under. Cover buttons and sew in place.
9. Fold raw edges under and press.
10. With wrong sides together, tuck the Halloween panels into the Harvest panels. Line up bottoms and top stitch together.