Han® 24 HPR enlarged

1.

2.

3.

4.

5.

All data given is in line with the actual state of art and therefore not binding.HARTING reserves the right to modify designs without giving the relevant reasons.

Order information: 10 m ring 09 45 600 0188 100 m ring 09 45 600 0138 500 m drum 09 45 600 0148 1000 m drum 09 45 600 0158

1. Conductor 4 x stranded copper wire. tin-plated AWG 22/19 x 0.16 mm Insulation PE. Comp.655, Ø 1.98 mm colours: blue, yellow, white, orange

2. Interlayer Aluminium foil-clad polyester

3. Screening Tin-plated. copper braid and foil

4. Banding Vylene ribbon

5. Jacket Elastomer electron beam cross-linked Comp 603

• Transmission of Fast Ethernet 100Base-T acc. to IEEE 802.3

• Suitablefordatacablingbetweencoachesand in rail vehicles

• Fireprotectionacc.EN45545-1,-2and-5,flameretardantandheatresistantacc.toDIN 5510 (1-4) and EN 50 264-1

• Temperaturerange:-40°C...+90°C• UVresistant• RoHSconform,halogenfreeLSZH• Additionallycertifiedacc.toDIN,NFF,BSandASTM

This data cable was especially designed for the cabling connec-tion between coaches but also for installation within rail vehicles andbuses.Thecablefulfilsthefireprotectionrequirementsaccording to the international standards for railway vehicles and buses and is suitable for operation over a wide temperature ran-ge. Cable design, material and compounds as well as proces-sing(electronbeamcross-linking)followthebasicrequirementsof the European standardisation for railway applications EN 45545-1, -2 and –5*.Therobuststarquadcableconstructionguarantiesareliabledatatransmissionupto100Mbit/sec.Thecable has been designed to be compatible with products from HARTING Han-Quintax® and Han®M12Crimpcontactrangeswhich can be used for data cabling connections between coaches.

Ha-VISEtherRail®ultraflexible datacable.starquad1x4xAWG 22/19, category 5 / 5e

Sheathmaterial:Elastomer, electron beam cross-linkedColour: black

Cable sheath diameter: (7.4+/-0.1)mm

Transmission performancen: Categorie 5 / 5e / transmission classDupto100MHzaccordingISO/IEC11801andEN50173-1

Transmissionrate:10/100Mbit/s

Operatingtemperaturerange:-40°C...+90°C

Cable weight: 77 kg/km

ApplicationAdvantages

Description Part number Drawing

HARTINGHa-VISEtherRail® Cable, 4x AWG 22/19, Cat. 5 / 5e

Ha-VISEtherRail®ultraflexibledatacable,4-wire, Cat. 5 / 5e

DataSheet0659

Mechanical featuresminimum bending radius Repeated bending: 12 x cable diameter Singularbending:6xcablediameterTensile strength max. 100 N

Electrical characteristics at 20 °CCouplingattanuationat100MHz <13mOhm/mConductorresistance max.54.4Ohm/kmInsulationresistance min.500MOhmxkmSignalruntime 5.4ns/mCharacterisicimpedanceat100MHz 100Ohm+/-5OhmTestvoltage(wire/wire/screenrms50Hzfor1min) 2000VOperatingvoltage 300V

Chemical characteristicsFire protection for railway vehicles DIN5510 Level1...4Flammability, smoke and toxicity (FST) Verticalflamepropagationonsinglecables EN60332-1-2 Carbonisation>50and≤540mmSmokedensity EN61034-2 transparency>70%Toxicityofbrandgases EN50305 ITC≤3Fire protection in railway vehicles EN 50264-1Halogenfree EN50267-2-1 HCIandHBr<0.5% EN50684-2 HF<0.1%Corrosivenessofbrandgases EN50267-2-2 pH>4.3 conductivity<10µs/mm

Material charateristicsOzoneresistance EN50264-3-1 72h/40°C,ProcedereB Volume concentration 200x10-6

Oilresistance EN50264-3-1 72h/100°C,IRM902Fuelresistance EN50264-3-1 168h/70°C,IRM903Marginalfireload DIN51900

Thermic features Maximumconductortemperature +90°C

Printing “HARTING”Ha-VISEtherRail®CAT5LSZH4xAWG22/19 “Part-Number””Chargecode”“Meter”

Weight 77 kg/km

Copper number 3.267 kg/100 m

Technical characteristics

HARTINGHa-VISEtherRail® Cable, 4x AWG 22/19, Cat. 5 / 5e

All data given is in line with the actual state of art and therefore not binding.HARTING reserves the right to modify designs without giving the relevant reasons.

Technical characteristics, Transmission performance

HARTINGHa-VISEtherRail® Cable, 4x AWG 22/19, Cat. 5 / 5e

Diagrams:Attenuation: Return loss

Next ELFext

All data given is in line with the actual state of art and therefore not binding.HARTING reserves the right to modify designs without giving the relevant reasons.

Transmission performance Category 5 / 5e acc. to EN 50 288-2-1, IEC 61 156-6 acc.toISO/IEC11801andEN50173

Additionally acceptance tests / certificatesHARTING‘sDeclarationofConformityNo.:ELICPN0004 TestedbyMPADresden/Germany • DINEN60332-1:2005-06 Verticalflamepropagationonseparatedwiresunderdefinded conditions Test Report No. 2011-B-1909/01.1 • DINEN60332-3-25:2010-08 Verticalflamepropagationonbundlesofcablesburningunder defindedconditions Test Report No. 2011-B-2727/01.1 • DINEN61034-2:2006-03 Smokedensitiyofcablesburningunderdefindedconditions Test Report No. 2011-B-1909/03.1

HARTING‘sDeclarationofConformitiyNo.:ELICPN0003 TestedbyISSePLiège/Belgium • NFC32-070:2001-01 CablesofcategoryC1NFC32,070 Test Report No. 2131-1/2011 • NFF16-101:1988-10 Reactiontofire-Cableclassification Test Report No. 2131-2/2011 • NFX10-702:1994 Smokedensitiytesting Test Report No. 2131-3/2011 • NFX70-100:2006-04 Analysisofpyrolysisandcombustiongases Test Report No. 2131-4/2011 • NFX16-101:1988-10 Smokeindex-Fclassification Test Report No. 2131-5/2011

HARTING‘sDeclarationofConformitiyNo.:ELICPN0006 TestedbyMPADresden/Germany • BS6853:1999Table13,AnnexD Measurementofsmokedensitiy Test Report No. 2011-B-2727/03.1 • BS6853:1999Table13,AnnexD Measurementunderfireconditions,Flammability Test Report No. 2011-B-2727/02.1

HARTING‘sDeclarationofConformitiyNo.:ELICPN0006 TestedbyGovmarkInc.NewYork/USA • AASTME162 Surfaceflammability Test Report No. 2-87106-0- • ASTME662 SpecificopticaldensityandSmokedensity Test Report No. 2-87106-1- • BSS7239 ToxicityofgasesFL&NF(ASTMF814) Test Report No. 2-87106-2

AdditionalCertifications

HARTINGHa-VISEtherRail® Cable, 4x AWG 22/19, Cat. 5 / 5e

All data given is in line with the actual state of art and therefore not binding.HARTING reserves the right to modify designs without giving the relevant reasons.

HARTINGM12circularconnector,D-coded,overmoulded

Nominal voltage 60 V DC Design IEC 61 076-2-101 D-coded No. of contacts 4 Rated impulse voltage 2.5kV Contactresistance 10mOhm Insulationresistance >500Mohm Ratedcurrent 4A@40°C/everycontact Temperaturerangemoveablecable -40°C...+85°C Temperaturerangefixedcable -40°C...+85°C Pollution degree 3 Protection IP 65/67 Insertion and withdrawal force 2 ... 4pol insertion 10N max. withdrawal 15N max. Matingcycles 100 Transmissionperformance Category5acc.toISO/IEC11801 Transmissionrate 10/100Mbit/s RoHS-compliant Yes Leadfree Yes

Insulator material Color black Materialgroupacc.IEC60112 CTI600 Contact material Contact material Copper alloy Platingcontactzone Ni/Au Assembly instructions recommendedtighteningtorque 0.6Nm for screw/ nut ./. widthacrossflats 13mm Mating face acc. IEC 61076-2-101 D-coded

All data given is in line with the actual state of art and therefore not binding.HARTING reserves the right to modify designs without giving the relevant reasons.

male female

General Information

HARTINGM12circularconnector, D-coded, overmoulded

2012-06-01

HARTING Electric GmbH & Co. KGWilhelm-Harting-Straße1|D-32339Espelkamp|Postfach1473|D-32328EspelkampTel.:+49577247-97100|Fax:+49577247-688|HARTING.Electric@HARTING.com|www.HARTING.com

Cable information

HARTINGM12circularconnector,D-coded,overmoulded

Cable type 1x4xAWG22/7

Cable sheath diameter 6.6 ±0,2 mm

Colour black

Wire construction 4 x stranded copper wire, tin-plated, AWG 22/7 x 0.25mm

Wire insulation Insulation PE. Comp. 655, Ø 1.5 mm

cable jacket material Elastomer. electron beam cross-linked Comp 603

min. bending radius repating bending 12 x cable diameter

min. bending radius singlular bending 6 x cable diameter

Transmissionperformance Category5/5eacc.toEN50288-2-1,IEC61156-6acc.toISO/IEC11801 and EN 50 173

Transmissionrate 10/100Mbit/s

Cable type 1x4xAWG22/19

Cable sheath diameter 7.4 ±0,1 mm

Colour black

Wire construction 4 x stranded copper wire, tin-plated, AWG 22/19 x 0.16 mm

Wire insulation Insulation PE. Comp. 655, Ø 1.98 mm

cable jacket material Elastomer. electron beam cross-linked Comp 603

min. bending radius repating bending 12 x cable diameter

min. bending radius singlular bending 6 x cable diameter

Transmissionperformance Category5/5eacc.toEN50288-2-1,IEC61156-6acc.toISO/IEC11801 and EN 50 173

Transmissionrate 10/100Mbit/s