handmade stainless steel undermount kitchen sink · 2018-06-04 · undermount kitchen sink...

Handmade Stainless Steel Undermount Kitchen Sink

KHU100-26 / KHU100-28 / KHU100-30 / KHU100-32 / KHU101-23 / KHU102-33 / KHU103-33 / KHU104-33 / KHU105-32 / KHU121-23 / KHU122-23 / KHU123-32

www.kraususa.com I Toll Free: 1.800.775.0703 I © 2017 Kraus USA Inc. I REV. December 7, 2017

INSTALLATION GUIDE

1

Congratulations on the purchase of your new Kraus plumbing fixture!

Please keep teh box and packaging materials until your product is completely installed. If you have any questions, require technical assistance, or have any problems with your product:

Please contact our Customer Service Team1-800-775-0703 / [email protected]

Have the model number available, and retain a copy of your receipt with purchase date for reference.

If for any reason this product does not meet your expectations, please be sure to repack this product in the original box and packaging material to avoid damage during transit.

DO NOT RETURN TO STORE

2

Prior to Installation:

• Make sure that you have all necessary parts by checking the parts list. If any part is

missing or damaged, please contact Kraus Customer Service at 800-775-0703 for a

replacement

• Inspect the sink prior to installation to make sure that it has not been damaged or

during shipping

• Use the cut-out template provided by Kraus

• Observe all plumbing and building codes according to your state requirements

• Not recommended to be installed with laminate countertop

For technical assistance or replacement parts, please contact Kraus

Customer Service and one of our representatives will be happy to help:

Toll-Free: 800-775-0703 or [email protected]

The step-by-step guidelines in the installation instructions are a general reference for installing a Kraus Sink. Should there be any discrepancies, Kraus cannot be held liable. It is recommended to install all Kraus products by hiring a licensed professional.

3

Parts List

• Cut-Out Template • Mounting Hardware • Bottom Grids • Drain

NOTE: Specialized tools may be necessary to install Kraus Stainless Steel Undermount

sinks with countertop materials other than wood, marble, or granite

Tools you will need:

Scissors

Screwdriver

Safety Goggles

Putty KnifePhillips Screwdriver

Drill

Tape Measure

Silicone Adhesive Jig Saw

Pencil

Adjustable wrench Phillips screwdriver

Tools You Will Need

Hex wrench Silicone Sealant

A

I

D

JF

B

G

C

H

EAdjustable wrenchPhillips screwdriver

Tools You Will Need

Hex wrench Silicone Sealant

A

I

D

J F

B

G

C

H

E

Dimensions

10”

254m

m

24”

26”609mm

660mm

18”

457m

m

16”

406m

m

10”

254m

m

26”

28”660mm

711mm

17”

731m

m

19”

482m

m

KHU100-2828” x 19” x 10”Min Cabinet Size: 33” Matching Grid: KBG-100-28 Drain Model #: ST-1

KHU100-2626” x 18” x 10”Min Cabinet Size: 30” Matching Grid: KBG-100-26 Drain Model #: ST-1

4

Dimensions

18”

457m

m

16”

406m

m

28”711mm

30”762mm

10”

254m

m

17”

432m

m19

”48

3mm

32”813mm

30”762mm

10”

254m

m

32.75”832mm

14.87”378mm

14.87”378mm

19”

483m

m

17”

432m

m

10”

254m

m

10”

254m

m

KHU100-3030” x 18” x 10”Min Cabinet Size: 33”Matching Grid: KBG-100-30Drain Model #: BST-1



KHU102-33 32 3/4” x 19” x 10”Min Cabinet Size: 36”Matching Grid: KBG-102-33-1 and KBG-102-33-2Drain Model #: BST-1 & ST-1

16”

406m

m

18”

457m

m

23”584mm

21”533mm

10”

254m

m

5

21”533mm

23”584mm

18.75”

476m

m

10”

254m

m16

.75”

426m

m

10”

254m

m

18.75”

476m

m

16.75”

426m

m

21.75”552mm

23.75”603mm

10”

254m

m

8”20

3mm

17”

432m

m

15”

381m

m

18”

457m

m

20”

508m

m

32”813mm

18”457mm

11”279mm

32.75”832mm

16.87”429mm

12.87”327mm

19”

483m

m

17”

432m

m

10”

254m

m

10”

254m

m

30.5”775mm

13.5”343mm

14”356mm

10”

254m

m

10”

254m

m

18”

457m

m

16”

406m

m

18”

457m

m

20”

508m

m

32.75”832mm

16.87”429mm

12.87”327mm

19”

483m

m

17”

432m

m

10”

254m

m

10”

254m

m

Dimensions


KHU121-2323” x 18 3/4” x 10”Min Cabinet Size: 27”Matching Grid: KBG-121-23Drain Model #: BST-1


KHU122-2323 3/4” x 18 3/4” x 10”Min Cabinet Size: 27”Matching Grid: KBG-122-23Drain Model #: BST-1

KHU105-3230 1/2” x 20” x 10”Min Cabinet Size: 36”Matching Grid: KBG-105-32-1 and KBG-105-32-2Drain Model #: BST-1 & ST-1

KHU123-32 32” x 20” x 10”Min Cabinet Size: 36”Matching Grid: KBG-123-32-1 and KBG-123-32-2Drain Model #: BST-1 & ST-1

6

1. Determine Reveal Type

Use scissors to cut along the line of the paper template for your desired reveal type (Negative, Positive, or Flushed Reveal)

Flushed/Zero Reveal

3/8“ Positive Reveal

1/8“ Negative Reveal

DETERMINE REVEAL TYPE

Step1 Step2 Step3

Step4 Step6Step5Step7

Step8 Step9

Determine location for mounting brackets; space

1/2"(13mm)

3/8 1/2

Centerline

3/8”POSITIVE

1/8”NEGATIVE

FLUSHED/ZERO

Flushed/Zero Reveal




Step1 Step2 Step3


Step8 Step9


1/2"(13mm)

3/8 1/2

Centerline

3/8”POSITIVE

1/8”NEGATIVE

FLUSHED/ZERO

Flushed/Zero Reveal




Step1 Step2 Step3


Step8 Step9


1/2"(13mm)

3/8 1/2

Centerline

3/8”POSITIVE

1/8”NEGATIVE

FLUSHED/ZERO

Flushed/Zero Reveal




Step1 Step2 Step3


Step8 Step9


1/2"(13mm)

3/8 1/2

Centerline

3/8”POSITIVE

1/8”NEGATIVE

FLUSHED/ZERO

KRAUS Recommended Installation Type

7

2. Position Template

• Check the cut-out template against the actual sink to ensure a proper sized cut-out• Place the cut-out template in the desired location on the countertop

Flushed/Zero Reveal




Step1 Step2 Step3


Step8 Step9


1/2"(13mm)

3/8 1/2

Centerline

3/8”POSITIVE

1/8”NEGATIVE

FLUSHED/ZERO

NOTE: Make sure clearance is suitable for backsplash, faucet, and plumbing for the sink

8

3. Trace Template

• Trace template on countertop with a pencil

Flushed/Zero Reveal




Step1 Step2 Step3


Step8 Step9


1/2"(13mm)

3/8 1/2

Centerline

3/8”POSITIVE

1/8”NEGATIVE

FLUSHED/ZERO

9

4. Cut Countertop

• Cut the opening in the countertop by carefully following the traced line

Flushed/Zero Reveal




Step1 Step2 Step3


Step8 Step9


1/2"(13mm)

3/8 1/2

Centerline

3/8”POSITIVE

1/8”NEGATIVE

FLUSHED/ZERO

Flushed/Zero Reveal




Step1 Step2 Step3


Step8 Step9


1/2"(13mm)

3/8 1/2

Centerline

3/8”POSITIVE

1/8”NEGATIVE

FLUSHED/ZERO

Flushed/Zero Reveal




Step1 Step2 Step3


Step8 Step9


1/2"(13mm)

3/8 1/2

Centerline

3/8”POSITIVE

1/8”NEGATIVE

FLUSHED/ZERO

Flushed/Zero Reveal




Step1 Step2 Step3


Step8 Step9


1/2"(13mm)

3/8 1/2

Centerline

3/8”POSITIVE

1/8”NEGATIVE

FLUSHED/ZERO

Flushed/Zero Reveal




Step1

Step2

Step3

Step4

Step6

Step5

Step7

Step8

Step9


1/2"

(13mm)

3/8

1/2

Centerline

3/8”POSITIVE

1/8”NEGATIVE

FLUSHED/ZERO

NOTE: Please use the appropriate saw that best fits your countertop material

10

6. Drill Hole in Countertop

5. Set up Mounting Brackets

• Drill 3/8” diameter x 1/2” deep hole in the countertop

• Turn countertop over and align sink with countertop. Decide location for mounting brackets • Mounting holes should be ½” from edge of sink

Flushed/Zero Reveal




Step1 Step2 Step3


Step8 Step9


1/2"(13mm)

3/8 1/2

Centerline

3/8”POSITIVE

1/8”NEGATIVE

FLUSHED/ZERO

Flushed/Zero Reveal




Step1 Step2 Step3


Step8 Step9


1/2"(13mm)

3/8 1/2

Centerline

3/8”POSITIVE

1/8”NEGATIVE

FLUSHED/ZERO

Flushed/Zero Reveal




Step1 Step2 Step3


Step8 Step9


1/2"(13mm)

3/8 1/2

Centerline

3/8”POSITIVE

1/8”NEGATIVE

FLUSHED/ZERO

Flushed/Zero Reveal




Step1 Step2 Step3


Step8 Step9


1/2"(13mm)

3/8 1/2

Centerline

3/8”POSITIVE

1/8”NEGATIVE

FLUSHED/ZERO

11

7. Install Anchors

• Insert anchors into drilled holes and lightly tap with a hammer until flush

Flushed/Zero Reveal




Step1 Step2 Step3


Step8 Step9


1/2"(13mm)

3/8 1/2

Centerline

3/8”POSITIVE

1/8”NEGATIVE

FLUSHED/ZERO

Flushed/Zero Reveal




Step1 Step2 Step3


Step8 Step9


1/2"(13mm)

3/8 1/2

Centerline

3/8”POSITIVE

1/8”NEGATIVE

FLUSHED/ZERO

8. Secure Sink to Countertop

• Use a bead of silicone (or preferred adhesive) around the rim of the sink. Check the alignment of the sink to the cutout in the countertop. Place sink over cutout hole and press firmly

Flushed/Zero Reveal




Step1 Step2 Step3


Step8 Step9


1/2"(13mm)

3/8 1/2

Centerline

3/8”POSITIVE

1/8”NEGATIVE

FLUSHED/ZERO

12

9. Attach Mounting Hardware

• Attach mounting hardware to secure bowl. Remove excess sealant from inside lip• Allow sealant to set for 30 – 60 minutes

10. Install Plumbing Fixtures

• Connect drain to sink. Connect trap to drain. Connect water supply connections to faucet according to manufacturer’s instructions• Run water into sink and check for leaks

Flushed/Zero Reveal




Step1 Step2 Step3


Step8 Step9


1/2"(13mm)

3/8 1/2

Centerline

3/8”POSITIVE

1/8”NEGATIVE

FLUSHED/ZERO

Flushed/Zero Reveal




Step1 Step2 Step3


Step8 Step9


1/2"(13mm)

3/8 1/2

Centerline

3/8”POSITIVE

1/8”NEGATIVE

FLUSHED/ZERO

Flushed/Zero Reveal




Step1 Step2 Step3


Step8 Step9


1/2"(13mm)

3/8 1/2

Centerline

3/8”POSITIVE

1/8”NEGATIVE

FLUSHED/ZERO

NOTE: Use acetone or rubbing alcohol to remove any excess sealant

13

Codes / Standards Applicable:

Kitchen Sink Warranty

Kraus products are manufactured and tested to the highest quality standards by Kraus USA Inc. (“Kraus”).

Kraus extends this warranty to the original purchaser for personal household use of the “Kitchen Sink” in its original location. The warranty is non-transferable.

Kraus warrants the structure and finish of the product to be free from defects in material and workmanship under normal usage for the lifetime of the product. The warranty commences from the initial date of purchase by the owner or trade professional, from an authorized Kraus dealer, through the lifetime of the original owner or end-user.

Any product reported to the authorized dealer or to Kraus as being defective within the warranty period will be repaired or replaced with a product of equal value at the option of Kraus. This warranty extends to the original owner or end-user, and is not transferable to a subsequent owner.

Restrictions

This warranty does not cover antediluvian, discontinued, or display products, whether such items are purchased at discount outlets, unauthorized dealers, and/or sold on clearance.

This warranty does not cover instances of negligence, misuse, abuse, improper installation, carelessness, accident, hard water or mineral deposits, exposure to corrosive materials, misapplication, damages caused by improper maintenance, alteration of the product, or failure to follow care or installation instructions enclosed with your product. Avoid using abrasive cleaners such as powders, bleach, ammonia, alcohol, or chlorine. Avoid using abrasive pads, steel wool, or wire brushes, as these will damage and wear down the finish.

This warranty does not apply to Products that have not been installed or operated in accordance with instructions supplied by Kraus and all applicable rules, regulations, and legislation pertaining to such installations.

This warranty does not apply unless the Kraus product is installed by a fully insured and licensed trade professional. Kraus insists that such professionals have experience in the installation of bathroom and kitchen manufactured goods.

This warranty does not cover labor charges or costs of removal and reinstallation of said product. This warranty does not allow recovery of incidental or consequential damages, such as loss of use, delay, property damage, or other consequential damages, and Kraus accepts no liability for such damages.

This warranty does not cover Marine or Outdoor Installation.

This warranty does not cover any free gifts included with purchase.

Except as otherwise provided above, Kraus makes no warranties, expressed or implied, including warranties of merchantability and fitness for a particular purpose, or compliance with any code.

Shipping charges will be covered for the first (1) year of the warranted replacement part or product (HI, AK, and Puerto Rico shipping charges may apply). International shipping fees are not included.

14

Commercial Warranty

Kraus extends the above warranty for a period of one (1) year to purchasers of products for industrial, commercial, and business use.

All incidental or consequential damages are specifically excluded. No additional warranties, express or implied are given, including but not limited to, any implied warranty of merchantability or fitness for a particular purpose.

Some states do not allow the exclusion or limitation of incidental or consequential damages or limitations on how long an implied warranty lasts, so the above limitations or exclusions may not apply to you.

This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.

KRAUS USA has the right to change, modify, and/or update the warranty policy at any time. For the latest, most up to date comprehensive warranty, go to www.kraususa.com/warranty

If you are a homeowner please contact a Kraus Customer Service Representative at:

Kraus USA, Inc. 12 Harbor Park DrivePort Washington, NY 11050Toll-free [email protected] If you are a plumbing contractor or trade professional please contact a Kraus Pro Representative at:

Kraus USA, Inc. 12 Harbor Park DrivePort Washington, NY [email protected] If you are an Authorized Partner please contact a Partner Support Representative at:

Kraus USA, Inc. 12 Harbor Park DrivePort Washington, NY [email protected]

In requesting warranty service, please be ready to provide:

1. Proof of purchase. 2. A description of the problem.

Download the Kraus Care & Maintenance Guide at:

http://www.kraususa.com/maintenance

IMPORTANT

Register Your Kraus Product

REGISTER TODAYhttp://www.kraususa.com/registration

Activate Your Warranty

Access Premium Customer Support

Get Product Information

www.kraususa.com

handmade stainless steel undermount kitchen sink · 2018-06-04 · undermount kitchen sink...

Documents