hacksaw blades manufacturer – bipico
TRANSCRIPT
An Introduction to Hack Sawing & Hack saws
Who we are?
● BIPICO, an ISO 9001:2008 company is established in November – 1974.
● BIPICO has grown into a major cutting tools manufacturer and exporter with a strong brand image in India and in international markets.
● BIPICO today is a brand leader in different types of Metal Cutting Tools. It draws its strength from its sophisticated infrastructure and sound engineering team who is always on innovation spree.
● Process of cutting metal to size using a cutting tool called hacksaw.
● It is used to cut wood, plastic or metal.
Introduction to Hack Sawing
You can see general figure showing different parts like Frame, Handle, Saw blade and wing nut.
Hacksaw Parts
There are two types of hacksaw frames:
● Solid hacksaw frame
● In this type, only one particular standard length of blade can be used with this frame.
● Adjustable hacksaw frame
● In this type different standard lengths of blades can be fitted to this frame.
Types of Hacksaw Frames
● 2 pin holes
● Center line
● Side
● Back edge
Hacksaw Blades
Number Of teeth per 25 mm (Pitch)
Name of Pitch Class
Thickness Class used for
Material Class used for
14 to 18 Coarse Pitch Teeth Thick Soft
18 to 24 Medium Pitch Teeth Medium Hard Steel and
Copper Alloys
24 to 32 Fine Pitch Teeth Thin Hard
Hacksaw Blades Size
● Selecting a blade with the correct number of teeth depends on the thickness and type of the material to be cut.
● During the cutting process there should be at least 3 teeth in contact.
● For thin sections, the highest number of teeth should be selected.
Tooth Selection
● Hold the hacksaw properly at an angle of 30°
● When cutting, move your body rather than just your arms.
● Apply pressure only during the forward stroke (cutting stroke).
● Use the entire length of the blade in each cutting stroke.
● The usual cutting speed is from 40 to 50 strokes per minute
Cutting With the Hacksaw
Our Products
● Save time
● Productive Work
● Reduce man power
● Reduce cost per cut
Using Metal Tools
Why Choose us
● Experience of more than 3 decades in hacksaw blade manufacturing industry.
● BIPICO has grown into a major cutting tools manufacturer and exporter with a strong brand image in India and in International markets. We attribute our strength to our large clientele base that has supported us throughout our journey and motivated us to innovate more and more.
● Competent Engineers assess quality of raw materials, in process goods & finished products in well-equipped testing facilities.
Address:
Nadarkha, Post Box No. 36,
Chikhli Road, Bilimora – 396 321
Dist. Navsari, Gujarat, ( INDIA )
Contact:
+ 91- 2634- 284629 / 284630 / 283695
+ 91- 2634- 283256
Email:
[email protected](For General Information)
Contact us