haas automation inc. -...
TRANSCRIPT
Закрытое акционерное общество «АБШАНАЛП MEf АЛЛ»
пк 05- 558 _02
А/О АБАМЕТ
Тел.: (095) 232-9997, факс: (095) 232-999ЙE-mail: [email protected]:\\www.abamet.ru
R O T A R Y T A B L E S & I N D E X E R S
HAAS AUTOMATION INC.
In the Beginning...
IN1983, Haas Automation, Inc., developed the first fully programmable 5C collet indexer. Built with quality
materials, and engineered to be dependable and highly accurate, the unit was a tremendous success. By closing the gap
between cumbersome, manually operated indexers and very expensive true 4th-axis machining centers, Haas established
itself as an industry leader in automated 4th-axis parts
positioning. By assisting industry in the quest to increase
productivity through automation, Haas has become one of
America's leading builders of machine tools and
rotary tables.
After more than a decade of ongoing refinement and
development, Haas rotary products continue to dominate the
industry with quality craftsmanship, dependable operation
and affordable prices. Today, Haas has a line of more than 32
models of rotary tables and indexers that deliver the same
high quality and extremely accurate performance that is the
Haas made-in-America trademark.
The full line of Haas rotary products includes many
specialized units designed for maximum productivity. From the
multi-head HASCs to the tilting T5Cs and TRT 160 and 210
models, Haas continues to lead the way to higher
productivity through automation.
Haas rotary products are built from top-quality
materials and undergo constant re-engineering and
refinement to offer only state-of-the-art technology.
Constructed of heavy-duty materials, and designed for
dependable day-in, day-out operation, Haas rotary products are
the benchmark by which all others are measured.
Take a close look at the components that go into our rotary tables. Haas manufactures all critical components in-house at our
modern California machining facility. By controlling the machining process, we're able to deliver the kind of quality and accuracy
our customers demand.
One example of this is the indexing
accuracy of our rotary tables. At the core of
every Haas rotary table is a large-diameter,
aluminum-bronze worm gear meshing with a
ground steel-alloy worm (hardened to 60 Re)
submerged in a synthetic oil bath. The secret
to Haas' indexing accuracy is cutting the
worm gear while it's attached to the spindle,
rather than assembling the finished worm
gear to the spindle as other rotary table
manufacturers do. Each assembled spindle is
individually trammed-in on a CNC gear
hobber to a maximum 5-micron runout; then
the worm gear is precision cut.
This process provides the utmost in
concentricity between the large-diameter
ball bearings and the worm gear, ensuring
many years of smooth, extremely accurate
and bind-free operation. This is just one of
the many quality designs that go into each
and every Haas product.
О Fast Alignment - All Haas tables and
tailstocks have 0.625" alignment keys. These
keys are parallel to and centered on the
spindle. When used on Haas VMCs with their
precision T-slots, you can bolt on a rotary
product without the need to indicate
the table in.
© Main Body - Class-30 iron is used for
superior damping qualities. Extremely rigid, it
damps vibration and deflects machining forces.
Machined by Haas in only two operations on
FMS machinery.
© Turntable Platter - Haas uses only
4140 heat-treated steel alloy for our platters.
Machined in-house, they deliver superior
strength and durability. Made by Haas.
О Servo Control - The original, and still
the best control available. More than a
decade of ongoing refinement has
produced near perfection, yielding absolute
control with the most user-friendly program-
ming available. It's still the benchmark other
manufacturers have unsuccessfully tried to
copy. Designed and built by Haas.
^y Bearings - Deep-groove radial
bearings withstand loads up to 31,000 Ib.
By supporting the worm gear on both sides
with these massive bearings, Haas is able to
deliver superior performance and dependable
operation. Precision-made in the USA.
@ Worm Gear - Haas' large-diameter
aluminum-bronze worm gear is bobbed
on a CNC gear hobber and inspected on a
Klingelnberg gear analyzer. Made by Haas.
Q Worm Drive Shaft - Our drive shafts
are made of 8620 steel hardened to Re 60,
then CNC precision-ground, and inspected
to a 2-micron runout on a Klingelnberg gear
analyzer. Made by Haas.
-//MMade with pride in the USA by Haas Automation, Inc.
The Haas Servo Control
SCO1M
JB шиш the heart of all Haas rotary products is the Haas Servo
Control. Refined to near perfection by more than a decade of
т il • development, it offers the utmost in versatility, coupled with fast,
easy, flexible programming. The Haas control always incorporates the
latest in high-speed microprocessor and drive technology.
Haas' exclusive software replaces failure-prone mechanical components, and
it includes a self-diagnostic subroutine which maximizes uptime. A single
circuit board controls all main functions.
When used with any CNC machining center, the control functions as
a semi-4th axis, activated by a single M function. Easy interfacing, fast setup and
low cost make Haas the perfect alternative to cumbersome, high-priced, offshore
4th-axis machines.
Using the control's standard features, odd number bolt circles and uneven
hole spacing are easily achieved with simple programming.
You can program the control to rotate the spindle in either direction, in step
sizes from 0.001 to 999.999 degrees. There can be up to ninety-nine different
steps in memory, and each step can be repeated (or looped) up to 999 times. The
memory is non-volatile, so programs are fully retained, even when the power is
turned off. You may store up to seven separate programs. (The SCO-TRT210 stores
up to four programs.)
You can easily achieve three times the performance of a manual device with
a Haas control operating the rotary table of your choice. Add to this built-in-the-
USA Haas quality and reliability, and your decision becomes very simple. Haas has
the solutions you need.
SCO-AC
иSCO-TRT210
U—
DIM
U U
SCO2-AC
4$2~ ~ fe,
Гт~\ ПП Го1 1™
шшшш( 1 | „„ 1 п^п F l fill 1 I JLta 1 *r±l FU rgllOII-llf 1
e e ®LJ
cJ
|
В
1
ENSIONS (Inches Vlillimeters) C
A B C
SC01M 11.12 4.94 0.62
SCO-AC 11.12 6.19 0.62
SCO-TRT210 11.12 9.19 0.62
SC02-AC 11.12 9.19 0.62
• Fast, easy, flexible programming
• Simple CNC interfacing via M function
• Variable feedrates
• Linear, arc & spiral milling
• Fast setups
• High accuracy & repeatability
• Absolute or incremental programming
• Automatic circle division
• Non-volatile program storage
• RS-232 interface
• Operates on 110 to 120 VAC power
• 12-month limited warranty
• Made in the USA
The Rotary Interface
H aas rotary products can be interfaced to virtually any
type of machine. There are three distinct methods of
interfacing listed below, each with different capabilities
and limitations. Thousands of Haas rotary products have been
successfully interfaced to a very wide variety of machines over
the years. Haas Automation's Service Department can provide
expert advice on the best interface for any application.
True 4th-Axis Direct Control Via Host Machine
This method does not use the Haas Servo Control unit; instead, an
amplifier built into the host machine provides power and true multi-axis
simultaneous motion control. Almost all Haas CNC machine tools can be
fitted with additional amplifiers that work with off-the-shelf Haas rotary
products. With this method, the rotary axis is programmed and controlled
directly by the host control - just like the X, Y and
Z axes. For direct control on machines other than
Haas, some Haas rotary products can be refitted
with compatible servo motors (Fanuc™, Yasnac™,
Allen Bradley, etc.).
4th-Axis Control Via RS-232 Port
This method requires use of a Haas Servo
Control unit and a host machine capable of
sending data via an RS-232 line. All Haas CNC
machine tools can send such data to control up to
three daisy-chained Servo Controls. On Haas CNC
machines, the rotary axis is programmed directly on
the CNC control -just like the X, Y and Z axes - and
no M codes are required. All other CNC machines
require macro function capability, an external M-
code controlled relay, and an M-FIN connection.
Programming is still done at the CNC control;
however, it is in the form of macros, and M codes
are required for synchronization.
Semi 4th-Axis Control Via
CNC Interface Cable
This method requires use of a Haas Servo
Control unit and a host machine capable of
closing a relay (or switch). Most CNC machine tools
are equipped with spare M codes, which can be used
to close a relay. Indexing commands are stored only
in the Servo Control's program memory. Each pulse of the host machine's
relay triggers the Servo Control to index to its next programmed position.
After finishing the index, the Servo Control signals that it has finished
and is ready for the next pulse. Fully-synchronized multi-axis motions
cannot be performed with this method. This method can be used with
machine tools that have no controls.
NOTES
Servo Controller can also be interfaced to PLC units and computers for
general-purpose use. Please contact Haas Automation for details.
*The term "4TH AXIS" is used as a general description. Unit may
operate as any axis depending on host machine.
Diagram of Control Indexer Interface
YOUR CNC MILL
4 PIN DIN CONNECTOR HAAS HA5C INTERNAL
REAR OF CONTROLLER
4th-axis ordering information
When ordering any Haas rotary table or indexer for use on a Haas
machining center, you do not need a servo control unit. We do, however,
suggest you get the control unit so you can use your rotary table on other
machines. Please discuss with your dealer the make and model of the CNC
machine you intend to use your new rotary table with before placing an order.
Now available — true 4th-axis custom motor configurations
Haas rotary products can now be ordered with various motor configurations.
This option allows a Haas rotary table to be used as a true 4th axis on many
CNC machining centers other than Haas VMCs. In order to properly set up a
Haas rotary table with an optional motor, you will have to supply detailed
information about the interfacing machine. Please call your dealer for details,
or contact Haas directly at 800-331-6746.
Brushless Motor Technology
• Higher overall speeds• Faster acceleration• Faster deceleration• Greater power and torque• Less heat generation• Higher duty cycle• Greater reliability• Reduced cycle times• Higher output• Bigger profits
Important NoteMost Haas rotary products are still
available with our shop-proven and
economical brush-type DC servo
motors for use with Haas CNC
machines furnished with standard
brush motors and drives.
Most Haas rotary tables are now available with
brushless servo motor technology. These highly
reliable, high-performance servo drives provide
greater torque for heavy operations, and yield higher
acceleration/deceleration rates to reduce cycle times.
With no brushes to wear and generate dust, motor
maintenance is reduced and reliability is substantially
increased. And, since the heat-producing windings are
attached to the outer shell, these motors run cooler, are more
compact and have a longer life than brush-type motors. Haas
brushless rotary tables are currently available in most models.
Contact Haas or an authorized Haas distributor for
further information.
Keep in mind, brushless rotary tables will work
seamlessly with any new Haas CNC machining center that also
utilizes brushless servo motor technology. For Haas machines
furnished with standard brush motors, or other
manufacturers' CNC equipment, you can utilize Haas brushless
rotary technology by using a Haas brushless servo control unit
(see previous page) with your new brushless rotary table.
HRT160SP not available as brushless configuration.
АП New Indexing Technology
Brushless technology prowides higher speeds& a more compact housing.
'Pact Size
For small parts machining, high-speed drill &
tap operations or repetitive parts where fast
cycle times are important, the new Haas
HA5CSB super-high-speed collet indexer is the
perfect solution. This compact
indexer features a powerful
brushless servo motor and 33:1
gear ratio to provide feedrates
up to 800°/second for reduced cycle times and high-
speed production. That's three times faster than the
standard HA5C.
All Haas brushless 5C collet indexers, including the newsuper-high-speed HA5CSB above, are now 30% shorter thanour standard brush-drive 5Cs - and they provide more power.
Super-High-SpeedSC Collet Indejcer
The new Haas HA5CSB collet indexer reduces
cycle times and positions parts at 800°/second.
• High-torque brushless servo
•800°/second feedrates
• Simple bolt-on mounting
• Reduces cycle times
• Speeds drill & tap operations
• High-speed engraving
HA5C SB
Torque (ft-lb) [N
Runout Max (in) (mm)
Backlash (arc-sec)
Speeds (°/sec)
Collets (in) (mm)
Nose Thread (in)
Center Height (in) (mm)
20
0.0004 0,01
40
0.001 to 800
std5C(V64-1Vi6) s t d 5 C ( 0 , 4 t o 2
23/i6-10
4.000 ±0.001 101, 6 ±0,025
INDEXING1
Accuracy (arc-sec)
Repeatability (arc-sec)
Resolution (°)
Max Rotation/Step (°)
Worm Gear Diameter (in) (mm)
±30
10
0.001
999.999
2.75 70
MOTOR
Type (hp AC servo) !k\
Gear Ratio (worm & gear)
0.75
33:1
- £-\J 1 1 I »_l O|-M[IVJI
HA5C Series
ID. Part*
A. HA5CSB
t* L\J 1 V|UCf
Description
Super-High-Speed Servo Indexer
w/Manual Handle Collet Closer
Duty Cycle*
Operating Temp, (max ambient)
Power Required (VAC)
Max Air Pressure (psi)(air collets)
WEIGHT
Rotary Head (Ib)
Brushless Control (Ib) (kg)
75% @ full speed
100°F
1 1 5 ±5% @ 1 0 amps
120
48
14.2 6,4
Specifications and Dimensions are like HA5C brushless (See page 8)
"Without tailstock. 'See page 38.Due to continual development, all machine specifications are subject to change.
НА5С Series
T he Haas HA5C series is the ideal choice
for holding smaller parts. Clamp your
parts using standard 5C collets, or chuck
them by threading a 3-jaw chuck to the 23Лб-10"
spindle nose. Collets can be closed with
your choice of a manual handle or an
optional air collet closer.
The HA5C series is easy to program, interface and set up. Haas' own precision
in-house manufacturing and machining processes ensure high quality and years
of dependable operation. With more than a decade of refinement, the Haas
HA5C is the industry benchmark for quality, accuracy and dependability.
High-Productivity Multi-Spindle Indexers
By spacing the heads as close together as possible, Haas
is able to obtain the most cost-effective multi-spindle
designs on the market today. In higher-volume applications,
loading multiple parts saves tool changing and rapid-movement
times, allowing your machine to run longer between part
loadings. Together, these time savings add
up to substantially increased profits.
HA5C Series
ID. Part*
A. HA5C
DescriptionServo Indexer
w/Manual Handle Collet Closer
Uses standard 5C collets,step chucks and closers
1 Threaded spindle nose for chucks1 Coolant-resistant polyurethane
conduit & seals1 Fast, easy, flexible programming1 Simple CNC interfacing via M function
Variable feedrates
• Linear, arc & spiral milling
• Fast setups
• Accurate and repeatable
• 12-month limited warranty
• Made in the USA
B. HA5C 21* Dual-Spindle Servo 5C System
C. НА5С 3HD1* Triple-Spindle Servo 5C System
D. HA5C4HD1* Quad-Spindle Servo 5C System
'Air Collet Closer not included (see pages 32-33)
*Note: Multi-Head Indexers are not designed to be used withspindles in the vertical position.
Specifications and Dimensions
HA5C Single Spindle
/Note: Carry-handle omittedfrom front view
D, Di
LOCATING PINS on base:00.6250" (±0.001") x 0.35" deep
15,875 mm (+0,025 mm)x8,89 mm deep
14'4,3m/ Cable
DIMENSIONS (Inches Millimeters)
A 7.80 J 3.0000 ±0.0003 76,20+0,00762В 7.38 К 5.47С 2.62 L 3.25DDi17.12 15.32 434,85389,12 M 0.750±0.002 19,05±0,051E 7.00 N 3.0000 ±0.0003 76,20 ±0,007 62F 2.12 P 1.750 ±0.001 44,45 ±0,0254G 0.520/0.530 TYP 13,21/13,46 TYP Q 4.000±0.001 101,60±0,0254H 7.93 201,42 |0i = Brushless Models)
HA5C-*
Т 1 -M
D
t ' t
:-р-Т,(Г
[l I ^фсо" ApllNuL , ~~7~~
Ньг]-1
'
DIMENSIONS (inches
HA5C2
Two, Three & FourF
„(I =DУ W Ч Y ^)~^
^P "ЙН
HA5CA Ai 6.24 4.45 158,50 113,03 9.10 7.27
„nРЧЧП
£,
GH-! -
3
Spindle
n -
I Щ| ^>\ 11 t- L 4 -J U-
"" N ^*~-• Q »
R — — K,-,
= - Пн1в№SH
•
— M
HA5C4231,14 184,66 9.10 7.27
В 81 18.6216.62 472,95 422,15 26.4824.65 672,59 626,11 31.4829.65С 11 10 281,94D 10.18E 9.25
11.1010.189.25
281,94258,57234,95
11.1010.189.25
F 5.000+0.002 127,00 ±0,051 5.000 ±0.002 127,00 ±0,051 5.000 ±0.002G 0.68 TYP 17,27 TYPH 3.88
• 0.68 TYP3.88
17,27 TYP98,55-
0.68 TYP3.88
231,14 184,66799,59 753,11281,94258,57234,95127,00 ±0,05117,27 TYP98,55
J 5.875 ±0.002 149,23 ±0,051 5.875 ±0.002 149,23 ±0,051 5.875 ±0.002 149,23+0,051К 0.70 17,78L 0.75 19,05M 0.53 13,46N 2.75P 7.93Q 5.50 139,70R
AC-25 7.93 201,42AC-100 14.75 374,65AC-125 9.29
0.700.750.532.757.935.50
7.9314.759.29
17,7819,0513,4669,85201,42139,70
201,42374,65235,97
0.700.750.532.757.935.50
7.9314.759.29
17,7819,0513,4669,85201,42139,70
201,42374,65235,97
(Ai, Bi = Brushless Models)
This HA5C is being used for a simple, point-to-point positioning
application. Used in this way, there are 360,000 different
programmable positions. A program can contain up to 99
different steps and each of these steps can be repeated up to
999 times.
D.
Air Collet Closer not included (see pages 32-33).
HA5C HA5C2 HA5C 3*
HA5C 4*
SPINDLE | |
Torque (ft-lb) (Nm)
Brushless (ft-lb) (Nm)
Runout Max (in) (mm)
Backlash (arc-sec)
Speeds (°/sec)
Collets (in) (mm)
Nose Thread (in)
Center Height (in) (mm)
45 61
60 81
0.0004 0,01
40
0.001 to 270
std 5C (Ум -Т/к) std 5C (0,4 to 27)
23/16-10
4.000 ±0.001 101,6 ±0,0254
20 2/ (per spindle)
25 34
0.0004 0,01
50
0.001 to 200
std5C('/64-1Vi6) std 5C (0,4 to 27)
23/i6-10
5.875 ±0.002 149,2 ±0,051
20 i (per spindle)
25 34
0.0004 0,01
50
0.001 to 200
std5C(V64-1Vi6) std 5C (0,4 to 27)
23/i6-10
5.875 ±0.002 149,2 ±0,051
INDEXING1
Accuracy (arc-sec)
Repeatability (arc-sec)
Resolution (°)
Max Rotation/Step (°)
Worm Gear Diameter (in) (mm)
±30
10
0.001
999.999
2.8 71,1
±60
10
0.001
999.999
2.8 71,1
±60
10
0.001
999.999
2.8 71,1
MOTOR
Type (hp DC servo) (kW DC servo]
Brushless (hp AC servo) (kW AC servo)
Gear Ratio (worm & gear)
0.5 0,4
0.75 0,6
60:1
0.5 0,4
0.75 0,6
60:1
^ ^ ^ ^ ^ ^ ^ • ^ • ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^M
1.5 1,1
1.0 0,7
60:1
OPERATING SPECIFICATIONS
Duty Cycle"
Operating Temp, (max ambient)
Power Required (VAC)
Max Air Pressure (psi) (bar)
75% @ full speed
100°F 38°C
1 15 ±5% @ 10 amps
120 8,3
75% ©full speed
100°F 38°C
1 15 ±5% @ 10 amps
120 8,3
75% ©full speed
100°F 38°C
1 15 ±5% @ 15 amps
120 8,3
WEIGHT
Rotary Head (Ib) (kg)
Control (lb)|kg)
Brushless Control (lb)(kg)
48 21,8
13 5,9
14.2 6,4
120 54,4
13 5,9
14.2 6,4
168 (3HD) 250 (4HD)76,2 (3HD) 113,4 (4HD)
13 5,9
14.2 6,4
* Not for use with tailstocks. "Without tailstock. 'See page 38.Due to continual development, all machine specifications are subject to change.
HRT Series
For holding medium to large parts or
fixtures, the Haas HRT series of
horizontal/vertical T-slotted rotary
tables is the answer. Available in five
different sizes ranging from 6.3" to 23.6",
these rugged heavy-duty tables can hold
parts and fixtures up to 1,475 pounds.
Chucks and fixtures can be easily bolted to
the table using the six machined T-slots. The
large thru-holes allow for bar feeding and
special fixture locating requirements.
E.
Specifications and Dimensions
• Mount horizontally or vertically
• Heavy-duty design
• Large thru-holes
• Coolant-resistant polyurethane
conduit & seals
• Fast, easy, flexible programming
• Simple CNC interfacing via M function
• Variable feedrates
• Linear, arc & spiral milling
• Fast setups
• High accuracy & repeatability
• 12-month limited warranty
• Made in the USA
HRT Series
ID. Part* Description
A. HRT 1 60 1 60 mm (6.3") Servo Rotary Table
w/Pneumatic Brake
B. HRT 210 21 Omm (8.27") Servo Rotary Table
w/Pneumatic Brake
C. HRT 310 31 Omm (12.2") Servo Rotary Table
w/Pneumatic Brake
D. HRT 450 450 mm (17.7") Servo Rotary Table
w/Hydraulic Brake
E. HRT 600 600 mm (23.6") Servo Rotary Table
w/Hydraulic Brake
DIMENSIONS (Inches Millimeters)
HRT 160AВСDDiEF
GH0
6.30 160
1.50 38,105.50 139,7016.20 411,4816.20 411,483.63 92,205.000 127,00±0.001 ±0,02544.500 114,301.500 38,10+0.0005, -0+0,0127, -0
JКLMNPQ
1.15 29,218.64 219,461.50 38,100.63 16,003.50 88,903.50 88,901.75 44,45
HRT 2108.27 2101.75 44,455.84 148,3420.00 508,0017.80 452,124.63 117,606.000 152,40±0.001 ±0,02545.250 133,352.000 50,80+0.0005, -0+0,0127, -00.63 16,0010.64 270,261.50 38,100.63 16,004.25 107,954.50 114,301 .75 44,45
(Di = Brushless Models)
1
1
С
^G—
J h
*
•/— YXJJ
*B
I
1 I'\
^E
^3ш>%
Y5^(— n:J-—I — *— '•
/ 0.531
HRT 310 HRT 45012.202.007.8224.3022.806.889.000±0.0017.8753.250
17.72 45050,80 2.25 57,15198,63 9.00 228,60617,22" 28.55 725,17579,12 28.55 725,17
9.25 234,9511.500 292,10
±0,0254 ±0.001 ±0,0254200,03 9.00 228,6082,55 7.500 190,50
+0.0005, -0 +0.001, -0+0,0127. -0 +0,0254, -00.0815.902.001.006.806.751.75
0.00 0,0020.62 523,75
50,80 2.25 57,151.13 28,70
172,72 7.90 200,66171,45 9.125 231,78
1.75 44,45
HRT 60023.62 6002.50 63,509.0034.82 884,4334.82 884,4312.134 308,2014.500 368,30±0.001 ±0,02549.000 228,7.500 190,+0.001, -0+0,0254, -00.00 0,0026.62 676,2.25 57,11.13 28,77.90 200,12.00 304,1.75 44,4
6050
155
D
D ili », LJ1
(o)
g^-4Шwт — L" wide x 0.5
|
\
^ftjljl1 &j£m¥//Мжг*:э
~* u0"deeo '
A
^C —
| |• • •
c "•
с
I / 13,46mm wide x 12.70 mm deeoFront & Rear Tie-Down Slots
i
N
t
U^
I
1
J
The HRT 310, shown here with a pillow block support, is being
used to reach multiple sides and angles on an engine block. This
entire machining operation, which may utilize up to 20 tools,
can be completed at one time. Eliminating multiple setups, tool
changes and extra handling by the operator is one of the
easiest and fastest ways to boost productivity.
Using standard T-nuts
Locating Key
on base:
0.6245" wide 15,862 mm
(+0, -0.001 ")0,025 4 mm
by
0.225" deep 5,72 mm
Minimum Dia.
Bolt Circle:
HRT 160-3.92" 99,57 mm
HRT 210-4.37" 111,00mm
HRT 310-6.00" 152,40 mm
HRT 450-9.84" 249,94 mm
HRT 600 - 9.84" 249,94 mm
А.
SPINDLE
Torque (ft-lb)(Nm)
Brushless (ft-lb)(Nm)
Runout Max (in) (mm)
Backlash (arc-sec)
Speeds (7sec)
Tooling
Center Height (in) (mm)
Brake Torque (ft-lb®ioopsi(Mm (86,9 bar
INDEXING1
HRT 160 HRT 210
•••100 136
150 203
0.0005 0,0127
30 •
0.001 to 80
6 std T-slots @ 60°
5.000+0.001 127 ±0,025 4
100 136 200 271
HRT 310 HRT 450 HRT 600
тиш^швт210 21
210 285
0.0005 0,0127
30
0.001 to 60
6 std T-siots @ 60°
200 271
300 407
0.001 0,0254
30
0.001 to 50
6 std T-slots @ 60°
325
400 542
0.0015 0,0381
30
0.001 to 40
6 std T-slots @ 60°
380 515
450 610
0.0015 0,0381
30
0.001 to 40
6 std T-slots @ 60°
6.000 +0.001 152,4 ±0,025 4 9.000 ±0.001 228,6 +0,025 4 11.500 ±0.001 292,1 ±0,025 4 14.500 ±0.001 368,3 ±0,025 4
500 678 1,800 2440 1,800 2440
Accuracy (arc-sec)
Repeatability (arc-sec)
Resolution (°)
Max Rotation/Step (°)
Worm Gear Diameter (in) (mm)
±15
10
0.001
999.999
4.7 119,4
±15
10
0.001
999.999
6.3 160,0
±15
10
0.001
999.999
9.4 238,8 '
±15
10
0.001
999.999
13.5 342,9
±15
10
0.001
999.999
13.5 342,9
MOTOR
Type (hp DC servo) (kW DC servo)
Brushless (hp AC servo) (kW AC servo)
Gear Ratio (worm & gear)
Timing Belt
0.5 0,4
1.0 0,7
63:1
2:1
1.5 1,1
1.0 0,7
90:1
2:1
1.5 1,1
3.0 2,2
72:1
2:1
1.5
3.0 2,2
72:1
3:1
1.5 1,1
3.0 2,2
72:1
3.5:1
OPERATING SPECIFICATIONS
Duty Cycle full/low speed
Operating Temp. (max. ambient)
Power Required (VAC)
Max Air Pressure (psi)lbar)
50% /100%
100°F 38°C
1 1 5 ± 1 5 % @ 1 5 A
120 8,3
50% /100%
100°F 38°C
115±15%@15A
120 8,3
50% /100%
100°F 38°C
115 ±15% О 15 A
120 8,3
50% /100%
100°F 38°C
1 15 ±15% @ 15 A
120
50% /100%
100°F 38°C
115±15%@15A
120
WEIGHT^^••••••••«••••••••« •^^ •IHHHI
Table (Ib)
Control (lb)(kg)
Brushless Control (Ib) (kg)
90
13 5,
14.2 6,4
165
13 5,9
14.2 6,4
435
13
14.2 6,4
850
13
14.2
1,475
13
14.2
Due to continual development, all machine specifications are subject to change.
HRT SP Series
HRT160/210/310 SP - The
HRT SP Series gives you
the same features and
benefits as the standard HRT series, but with
the motor wrapped behind the table to give a
substantially shorter overall length and help
you fit a lot of table into a small work envelope.
(Available with Al-6 platter on the HRT
210SP, and Al-5 platter on the HRT 160SP, for
a slight additional cost.)
• Heavy-duty design
• Large thru-holes
• Coolant-resistant polyurethane
conduit & seals
• Fast, easy, flexible programming
• Simple CNC interfacing via M function
• Variable feedrates
• Linear, arc & spiral milling
• Fast setups
• High accuracy & repeatability
• 12-month limited warranty
• Made in the USA
HRT SP Series
ID. Part* Description
A. HRT 160SP 160mm (6.30") Servo Rotary Tablew/Motor in Back
B. HRT210SP 21 Omm (8.27") Servo Rotary Tablew/Motor in Back
C. HRT310SP 31 Omm (12.20") Servo Rotary Tablew/Motor in Back
Specifications and Dimensions
T-slot detail
DIMENSIONS(Inches Millimeters)
0.56214,275
0.970/0.93024,638/23,622
0.390/0.3609,906/9,144
0.375
9,525
- 1 4 ' 4 , 3 mCable
—G-*•] [•*- 0.530" wide x 0.50"deep
13,46 mm wide x 12,70 mm deepFront & Rear Tie-Down Slots
DIMENSIONS (Inches Millimeters)
HRT 160SPA 10.80
В 12.25
С 10.39
D 8.63E 5.000+0.001 127,00 ±0,025 4
F 3.63G0xdp1.500x6.00 38,10x152,40
HRT 210SP12.28 311,91
13.77
12.39 314,71
10.64
6.000 ±0.001 152,40 ±0,025 4
4.63 117,602.000x7.00 50,80x177,80
HRT310SP16.26 413,00
17.80
17.60 447,04
15.90 403,86
9.000+0.001 228,60 ±0,025 4
6.883.25 x 9.875 82,55 x 250,825
Complex shapes and multi-angle cutting tasks are no problem
with Haas on your side, and now neither are work
space or multi-fixturing. When you need more room, look to the
HRT SP series of Haas rotary tables, which take up less
work-envelope area.
HRT 160SP HRT 210SP
SPINDLE
Torque (ft-lbb'Nm)
Brushless (ft-lb)(Nm)
Runout Max (in) (mm)
Backlash (arc-sec)
Speeds (%ec)
Tooling
Center Height (in) (mm)
Brake Torque (ft-lb@ioopsi)(Mm @6,9bar) '
100N/A
0.0005 0,0127
30
0.001 to 80 '6 std T-slots @ 60°
5.000 ±0.001 127+0,0254
100 136
210 285210 285
0.0005 0,0127
30
0.001 to 60
6 std T-slots @ 60°
6.000 ±0.001 152,4 ±0,025 4
200 271
INDEXING1
Accuracy (arc-sec)
Repeatability (arc-sec)
Resolution (°)
Max Rotation/Step (°)
Worm Gear Diameter (in)
±1510
0.001
999.999
4.70 119,4
±15
10
0.001
999.999
6.30
MOTOR
Type (hp DC servo) (kW'OC
Brushless (hp AC servo) ikW AC S(
Gear Ratio (worm & gear)
Timing Belt
и|_ _1 _ 1 1 н В1М _|а.|| вш_|__ _> ___|___||н__ _||___
0.5 0,
N/A
63:1
2:1
1.51.0
90:12:1
OPERATING SPECIFICATIONS
Duty Cycle full/low speed
Operating Temp, (max ambient)
Power Required (VAC)
Max Air Pressure (psijfhr
50% /100%100°F
115 ±15% @ 15 amps
120
50% /100%100°F
115±15%@15amps
120
WEIGHT
Table (Ib)
Control (Ib)
Brushless Control (Ib) !!•••. I
Я^^^^^ЯНт^^тятЯЯттвтнттЯЩНЯт^тттттттат
90
13
N/A
ЯЯЯЯЯтЯЯтЯЯЯЯЯЯЯЯЯЯЯЯЯЯЯЯЯЯЯЯЯЯЯЯЯЯЯтЯЯЯЯЯЯЯМЯЯЯЯЯЯЯЯЯЯЯЯтПвтШтЯт^^тв^т
165
13
14.2 6,4
HRT 310SP
•••200 271300 407
0.001 0,0254
30
0.001 to 50
В std T-slots @ 60°
9.000 ±0.001 228,6 ±0,025 4
500 678
±15
10
0.001999.999
9.40 2:
1.53.0
72:1
2:1
50%/100%
100°F
115 ±15% @ 15 amps
120
435
13 5,
14.2 6,4
'See page 38.Due to continual development, all machine specifications are subject to change.
HRT Super High Speed Series
HRT210SHS - For small to medium parts,
Haas has now boosted productivity
with even quicker cycle times. Nearly
six times faster than the standard HRT 210, the 210SHS
(Super-High-Speed) greatly increases productivity with rapids
to 360 degrees per second and feedrates to 270 degrees per
second. In addition to the increased speed, the new HRT
210SHS is compact like our SP series. So if your job requires
several indexes, or if your application has limited work space,
this new table is ideal for your application.
Specifications and Dimensions
• Harmonic drive gear design
• Compact enclosure
• Brushless servo motor technology
• Coolant-resistant polyurethane
conduit & seals
• Fast, easy, flexible programming
• Simple CNC interfacing via M function
• Variable feedrates
• Linear, arc & spiral milling
• Fast setups
• High accuracy & repeatability
• 12-month limited warranty
• Made in the USA
HRT Super High Speed Series
ID. Part* Description
A. HRT 21OSHS 210 mm (8.27") Servo Rotary Table w/
Harmonic Gear Drive & Motor in Back
—| |— 0.530" wide x 0.50" deep13,46 mm wide X 12,70 mm deepFront & Rear Tie-Down Slots
..— К —J Minimum Dia. Bolt Circle: 5.65" H3.51
ч DIMENSIONS (Inches Millimeters)
AВСD
12.604.6310.646.00 ±0.001
320,04
117,60
270,26152,40 ±0,025 4
E 0 2.000 x 1.20 deep ±0.001 50,8 x 30,48 deep ±0,025 4
+0.000__ -0.001 0,0254mm
0.625" wide x 0.225" dei15,875 mm wide x 5,7 nLocating Key
FGHJКL
12.381.758.271.57 Wrench Access4.504.25
314,4544,45210,06
114,30107,95
HRT210SHS-HD
SPINDLE^ •ЁЯШИИИ ИВИ И ^ И ВШИ ИИИРИИ»™ ^
Torque (ft-lb)(Nm)Runout Max (in) (mm)Speeds, Feed (°/sec)
Speeds, Rapid (°/sec)ToolingCenter Height (in) (mm)Max Part Capacity (lb)(kg)
200 271
0.0005 0,01270.001 to 270
0.001 to 360
8 std T-slots @ 45°6.000 ±0.001 152,4 ±0,025 450 22,68
INDEXING1
^••••••••••••вр ивя^ ииииииии™"™»
Accuracy (arc-sec)Repeatability (arc-sec)Resolution (°)Max Rotation/Step (°)Drive
±30
10
0.001
999.999Harmonic
MOTORBrushless AC servo (hp)(kW)Gear Ratio
OPERATING SPECIFICATIONSDuty Cycle full/low speedOperating Temp, (max ambient)Power Required (VAC)
WEIGHTRotary Head (lb)(kg)Brushless Control (lb)(l<g|*
50%/100%100°F 38°C115 ±15% @ 15 amps
165 74,814.2 6,4
'See page 38. 'Available in brushless drive only.Due to continual development, all machine specifications are subject to change.
SC Series: Motion Control
Haas Single-Axis Motion Controls provide a low-cost method to
automate your machine shop. Easy to use and simple to interface, each
single-axis motion control combines a powerful servo motor with the
versatile Haas Servo Control. These units can be used to control a single
linear or rotary axis for such applications as rotary grinders, surface grinders,
cross-slide tables, inspection machines and much more.
HRT SC Series
ID.A.
Part*SC 4.01
SC 4.0/SC 5.0
The Haas programmable single-axis control features
a DC servo motor with speeds up to 3,000 rpm and a built-in,
high-speed RS-232 port.
• Low cost
• Linear & rotary axis control
• Speeds up to 3,000 rpm
Continuous torqueSC 4.0: 350 oz-in (2,5 Nm)SC 5.0: 576 oz-in (4,1 Nm)
Peak torqueSC4.0: 1,440 oz-in (10,2 Nm)SC 5.0: 3,000 oz-in (21,2 Nm)
Programmable parameters
• RS-232 port for fastuploading and downloadingof programs
1 Easy to interface and use
Simple to interface to otherequipment
Specifications and Dimensions
p
x(MAX)
^ n
S
илтЧ
^
H
и U
J—
DIMENSIONS (Inches Millimeters)
AВСnEFGHJКL
SC44.00
0 SC 5.0
--K-H
lгL
ATYP.
- — СTYP
( )
s — л( ^ ^V у
o v у
/- В TYP.
®
V4 X D
CONTROL DIMENSIONS
SC 4.0101,60 4.00 101,60 Width 11.12 282,45
R 0.1875 4,763 R 0.18753.406
Height 494 125,483.406 Depth 12.75
0.340 Thru 8,636 0.390 Thru8.932.874.200.450.15
12.20 SC 5.0
287 Width 1112
7 25 Height 4 94
11 0.45 11,43 DeP'h 12.75
0.151.69 ±0.03 '2,93 ± 1.69 ±0.030.6243 0.6243
2,93 ±0,76
B. SC 5.0
C. SC 9.0
'Not Shown
DescriptionSingle-Axis Motion ControlPeak torque 1,440 oz-in (10,2 Nm)
Single-Axis Motion ControlPeak torque 3,000 oz-in (21,2 Nm)
Single-Axis Motion ControlPeak torque 1,952 oz-in (13,8 Nm)
SC 9.0
This new programmable single-axis control features a
powerful AC brushless servo motor with speeds up to 3,000 rpm.
Low cost
Linear & rotary axis control
Speeds up to 3,000 rpm
Continuous torque 768 oz-in(5,4 Nm)
Peak torque 1,952 oz-in(13,8 Nm)
8,192-line encoder feedback
Programmable parameters
RS-232 port for fastuploading
Easy to interface and use1 Simple to interface to other
equipment
Specifications and Dimensions
h. — — K —
I- J
i 1
ГH
1
1 1 \ \
"
-~
Л
»-
»-
1
HJ•-
-1!
UE•*- D
С и-
p I
т —гг N
J
I 1ffV""""
V
DIMENSIONS (Inches Millimeters)
A 8.62В 6.34С 2.28D 0.47E 0.24F 0.75
КLMN
5.515.124.044.29
ixC
\Г1
\
139,95
130,05
102,61
108,97
'y
CONTROL DIMENSIONSG 4.33H 3.46J 3.46
WidthHeightDepth
11.126.1912.75
157,23
323,85
HRT Dual Table Series
160-2 &
HRT 210-2 -
Double yourHRTproduction with our HRT 160-2 and
HRT 210-2 dual platter models. The
HRT 160-2 provides two spindles
with 6.30" platters on 10" centers,
and the HRT 210-2 provides two
spindles with 8.27" diameter
platters on 12" centers. Both
models yield maximum productivity
in minimal space.
Also available in SP style,and with Al-6 and Al-5 platters,
for an additional cost.
Specifications and Dimensions
• Heavy-duty design
• Coolant-resistant polyurethane
conduit & seals
• Simple CNC interfacing via M function
• Variable feedrates
• Linear, arc & spiral milling
• High accuracy & repeatability
• 12-month limited warranty
• Made in the USA
HRT Dual Table Series
ID. Part# Description
A. HRT 160-2* Dual-Spindle Servo RotaryTable, 10" (254 mm) Center Distance
B. HRT 210-2* Dual-Spindle Servo RotaryTable, 12" (304,8 mm) Center Distance
*Note: Dual-table rotaries are not designed to be used withspindles in the vertical position.
DIMENSIONS (Inches Millimeters)
HRT 160-2A Ai 26.10 26.10 662,94 662,94В 10.000 ±0.001 254,00 ±0,025 4С 6.00D 6.750 ±0.002 171,45 ±0,051E 4.50F 19.63G 0.88H 0.053J 1.25К 1 75
114,30
498,60
22,35
1,35
31,754445
(Ai = Brushless Models)
_м Г _
.о о
оо
°лл°о ^-— -^ о
1 1ц
V-
1
р
1„ *
t
с
p
[
J
(S)_х 5<3[1Е>:Чч
/ Plr \ШоШ^ 3_fc^1 Jjnil 1 1
*J
HRT 2 10-231.80 30.30 807,72 769,6212.000+0.001 304,80 ±0,025 47.007.750 ±0.002 196,85+0,0515.2523.630.880.0531.251 75
A Ai
П to.
V-V n
st^-if::^
/ ^й^ ^х(ШЙ^ыШ)
^^^L^^^i i l
•n1
к
1' "i/7
ШАА
IADE IN USA
i „
A closeup view of an impeller-type machiningprocess utilizing simultaneous 4th-axis machiningwith a Haas HRT 210-2. These dual-platter rotarytables can boost your productivity considerably.
A. B.
HRT 160-2 HRT 210-2
SPINDLE
Torque (ft-lb)'N
Brushless (ft-lbl(Nm)
Runout Max (in) (mini
Backlash (arc-sec)
Speeds (°/sec)
Tooling
Center Height (in) (mm)
Brake Torque (ft- lb@ioopsi) (Nrn ee.gbar)
75 102
110 149
0.0005 0,0127
300.001 to 80
6 std T-slots @ 60°
6.750 ±0.001 171, 5 ±0,0254
100 136
170 230
170 230
0.0005 0,0127
30
0.001 to 60
6 std T-slots @ 60°
7.750+0.001 197 ±0,025 4
200 271
INDEXING1 |
Accuracy (arc-sec)
Repeatability (arc-sec)
Resolution (°)
Max Rotation/Step (°)
Worm Gear Diameter (in)lmm)
±15100.001
999.999
4.70 119,4
±15100.001
999.999
6.30 160,0
MOTOR |
Type (hp DC servo) (kW DC servo)
Brushless (hp AC servo) (kW AC servo)
Gear Ratio (worm & gear)
Timing Belt
0.5 0,4
1 0,7
63:1
2:1
1.5 1,1
1 0,7
90:1
2:1
OPERATING SPECIFICATIONS | |
Duty Cycle full/low speed
Operating Temp, (max ambient)
Power Required (VAC)
Max Air Pressure (psi)(bar)
50% /100%
100°F 38°C
115±15%@15amps
120 8,3
50% /100%
100°F 38°C
115±15%@15amps
120 8,3
WEIGHT
Table (lb)(kg)
Control (Ib) (kg)
Brushless Control (lb)(kg)
210 95,3
13 5,9
14.2 6,4
355 161
13 5,9
14.2 6,4
Due to continual development, all machine specifications are subject to change.
HRT A Series
HRTA6 & HRT A5 -
If versatility in
workholding is
important to you, the Haas HRT series of
Al-6 and Al-5 spindle rotary tables is
the way to go. Chucks, faceplates and
collet chucks can easily be mounted to a
standard Al spindle nose. For the
HRT A6, Haas offers an 8" 3-jaw chuck
(LC8A6-B) with an adjust-true feature,
as well as 8" or 11" plain faceplates
(FP-8, FP-11) for making your own
fixtures. For small parts, we have a 5C
collet chuck (A65C) and 16C collet
chuck (A616C) that work with the A6AC
draw bar. With this optional pneumatic
draw bar assembly (see page 33, item D)
on the HRT A6, collets can be closed
with the flip of a switch. 3J collet
chucks are available from your local
tooling supplier.
• Versatile workholding options
• Large thru holes
• Coolant-resistant polyurethane
conduit & seals
• Pneumatic draw bar option (A1-6 model)
• Fast, easy, flexible programming
• Simple CNC interfacing via M function
• Variable feedrates
• Linear, arc & spiral milling
• Fast setups
• High accuracy & repeatability
• 12-month limited warranty
• Made in the USA
KRT A Series
ID. Part*
A. HRT A6
B. HRTA51
DescriptionRotary Table
w/A1-6 Spindle Nose
Rotary Table
W/A1-5 Spindle Nose
Specifications and Dimensions
1
_ 6 — — — —
С
. Л „о о
лwО
., Y
0V_y0
— ^D
J-
R
1
F
-
II
Е
/-"
//•2
\ \*Ч»\ N* 1
©
J-\\
&)}
( ! 1 h
1DIMENSIONS (inches
L-L
M
1
1
n r/jK7твЯЕ т imr M A
5ж5MADE IM USA
> I
^ H
I
с — —
[— ]о о о
о о
о о
о о о
Millimeters)
HRT A5 160 mm (6.30")A A5 SpindleВ 2.00С 5.50
50,80
139,70
DDi 16.20 16.20 411E 3.63
,48 411,4
92,20
HRT A6 21 Omm (8.27")A6 Spindle2.25 57,155.84 148,3420.00 17.80 508,004.63 117,60
452,12
F 5.000 ±0.001 127,00 ±0,025 4 6.000 ±0.001 152,40+0,0254G 4.50H0j 1
5015
К 8.64L 0.53M 1 75
114,30
38, 10
29,21
219,46
13,46
44,45
5.25 133,352.03 51,560.63 16,0010.64 270,260.53 13,461.75 44,45
(D = Brushless Models)
'Draw tube not available.
'Accessories for the HRT A5 available from your tooling supplier.
Locating Key on base of all models:
0.6245" wide (+0, -0.001") x 0.225" deep15,862 mm wide (+0, -0,025 4 mm) x 5,715 mm deep
A65C-5C Collet Adapters
3J Collet Adapters(Available from your tooling supplier)
A616C-16C Collet Adapters(Available from your tooling supplier)
FP8 or FP11 - 8" (203,2 mm) or 11" (279,4 mm) Faceplates
LC8A6-B - 8" (203,2 mm). 3-Jaw Manual Chuck
This high-productivity application utilizing a custom, multi-part
fixture and Haas tailstock increased output by more than 500%.
This is just one example of how a Haas rotary table can increase
your productivity and help you make more money in less time.
Available in SP models; see page 12.
SPINDLE
HRTA5 HRTA6
Torque (ft-lb)(Nm)
Brushless (ft-lb)(Nm)
Runout Max (in) (mm)
Backlash (arc-sec)
Speeds (°/sec)
Tooling
Center Height (in) (mm)
Brake Torque (ft-lb eioopsi) (Nm @б,эьаг)
100 136
150 203
0.0005 0,0127
30
0.001 to 80
A1-5 Spindle on HRTA5
5.000 ±0.001 127+0,0254
100 136
^ ^ ^ MaB ^ _H_B _^ _^ MM ______B__fl__^ ^ _MMIH H HHH
210 285
210 285
0.0005 0,0127
30
0.001 to 60
A1 -6 Spindle on HRTA6
6.000 ±0.001 152,4 ±0,025 4
200 271
_н_ймн__1_в ^ ^ _ _|м_|и _1__НМ1^ в й|мн||. _м__а|м__ймйм _н ^ __ _
INDEXING1 1 |
Accuracy (arc-sec)
Repeatability (arc-sec)
Resolution (°)
Max Rotation/Step (°)
Worm Gear Diameter (in) (mm)
^ ^ i i p BII_ __ __IHBH. ^ ^ ^ ^ ^ ^ ^ ^ _._IIIM BBIBI>B_i i
±15
10
0.001
999.999
4.70 119,4
__|н_^ ^ ^__^ _^_м_М1^ ^ ^__^__^ ^ а__иви нп
±15
10
0.001
999.999
6.30 160,0
НВВ__|В ^ ^ _Ш_ИН ___1 _.И>ВМ|НШ1 _ ^ _НН_МННШ1Ш|ММИ|НН|Н|НН|Н|Ш_
MOTOR | |
Type (hp DC servo) (kW DC servo)
Brushless (hp AC servo) (kW AC servo)
Gear Ratio (worm & gear)
Timing Belt
0.5 0,4
1 0,7
63:1
2:1
1.5 ,,1
1 0,7
90:1
2:1
^ _^ _^ ^ ^____B ^ ^ ^ ^ ^ ^ __^ ^ ^ ^__HIH__IMHIBH___Hi__lll_^ B_ H_l
OPERATING SPECIFICATIONS | |
Duty Cycle full/low speed
Operating Temp, (max ambient)
Power Required (VAC)
Max Air Pressure (psi) (bar)
50% /100%100°F 38°C
115±15%@15amps
120 8,3
_Il ^_IIHIIla>i ^ ^ ^_MI__^__H_^_^ ^ _ M B ___HMMM_H ^ ^
50% /100%
100°F 38°C
115±15%@15amps
120 8,3
^^___IH_l _^^^^____._ H ^^^^_aaaBBB>l _M__ll _^___B___HH_HHBII_
WEIGHT | |
Table (lb);kg)
Control (Ib)ikg)
Brushless Control (lb)(kg)
90 '
13 5,9
14.2 6,4
165 /4,8
13 5,9
14.2 6,4
'See page 38.Due to continual development, all machine specifications are subject to change.
TRT Series
•ЯШ Ш» ••• 160 & TRT 210 - Eliminate second and third
•K operations and setups by using the Haas TRT
• III 210 or TRT 160 two-axis tilting rotary
table. Machine up to five sides of a
part, and easily program the con-
trol to reach virtually any JJl \
compound angle. When used on a *\i
Haas VMC with the 5-axis option, |||
complex geometries - such as
impellers - are easily accomplished. «
The TRT 160 and 210 are sturdy,
high-precision tilting units that easily *-.
interface with a Haas VMC; or, add the
Haas servo control* and they'll run on any other VMC.Specifications and Dimensions
Maximum fixture and part
weights are 300 Ib for the TRT 210 and
150 Ib for the TRT 160. With a 200 Ib
load on the TRT 210, there is less than
0.0002" deflection. By utilizing massive
castings, and bearings at both front and
rear sections, Haas is able to build an
extremely rugged and durable tilting
table. Includes dual-axis servo control &
CNC interface cable for semi-4th & 5th-
axis operation. Available with Al-5 or
Al-6 platter.
* Brushless 2-axis servo control not
available. Brushless single-axis control
available for use with Haas machining
centers with 4-axis controls. Call for
compatibility with Haas machining
centers with 4- and 5-axis controls.
TRT Series
ID. Part#A. TRT 160
B. TRT 210
Description
Tilting 5th-Axis Rotary Table160 mm (6.30")
Tilting 5th-Axis Rotary Table210 mm (8.27")
Front View Min. Clearance, F
(Maximum Part/ Fixture Radius)
44'4 267 mmCable
Side View
DIMENSIONSi HDD (Inches Millimeters)
TRT 160 TRT 210160 mm (6.30") 210 mm (8.27")
AAi 21.28 18.08 25.84 24.34
540,51 459,23 656,34 618,24
В
Top View
6.00
152,40
±120°
2.00
50,80
7.75
196,85
1.18
29,97
12.39
314,71
14.14
359,16
4.25
107,95
КЮ 26.15 26.15
8.48
215,39
±120°
1.00
25,40
9.00
228,60
0.40
10,16
15.90
403,86
17.65
448,31
6.00
152,40
33,36 31.10
664,21 664,21 847,34 789,94
(Ai,Ki = Brushless Models)
Machine up to five sides of a part, eliminate multiple operations
and setups, and increase your production output by using our 2-
axis tilting rotary tables. The TRT 160 and 210 are sturdy, high-
precision tilting units that easily interface with a Haas VMC; or,
add the Haas servo control and they'll run on any other VMC.
TRT 160 TRT 210
Rotary В axis Tilt A axis Rotary В axis Tilt A axis
SPINDLE
Torque (ft-lb)INm)
Brushless (ft-lb)INm)
Runout Max (in)(mm|
Backlash (arc-sec)
Speeds (°/sec)
Center Height (in) (mm)
Brake Torque (ft-lb@ioopsi) (Nm ое.эьаг)
100 136
150 203
0.0005 0.0127
30
0.001 to 80
N/A
100 136
210 2!
210 285
0.0005 0,0127
30
0.001 to 60
7.750+0.001 197 ±0,025 4
200 271
210 ""
210 285
0.0005 0,0127
30
0.001 to 60
N/A
200 271
200 271
300 407
0.0005 0,0127
30
0.001 to 50
9.000 ±0.001
500 678
228,6 ±0,025 4
INDEXING1
Accuracy (arc-sec)
Repeatability (arc-sec)
Resolution (°)
Max Rotation/Step (°)
±15
10
0.001
999.999
+25
10
0.001
±120
±15
10
0.001
999.999
+25
10
0.001
±120
MOTOR
Type (hp DC servo) (kW DC servo)
Brushless (hp AC servo) (kW AC servo)
Timing Belt
0.5 0,4
1 0.7
2:1
1.5 1,1
1 0,7
2:1
1.5 1,1
1 0,7
2:1
1.5 1,1
1 0,7
2:1
OPERATING SPECIFICATIONS
Operating Temp. (max. ambient)
Power Required (VAC)
Max Air Pressure (psi)(bar)
100°F 3
115 ±15% @ 15 amps
120 8,3
100°F 3
115+15% @15amps
120 8,3
100°F 3
115 ±15% @ 15 amps
120 8,3
100°F 3
115±15%<3
120 8.3
15 amps
WEIGHT 1
Table (lb)(kg)
Control (lb)(kg)
Brushless Control (lb)(kg)
400 181,4
17(2-axis) 13(1-axis) 7,7 (2-axis) 5,9(1-axis)
23.1 (2-axis) 14.2(1-axis) 10,4 (2-axis) 6,4(1-axis)
735 333,4
17 (2-axis) 13 (1 -axis) 7,7 (2-axis) 5,9 (1 -axis)
23.1 (2-axis) 14.2(1-axis) 10,4 (2-axis) 6,4(1-axis)
Due to continual development, all machine specifications are subject to change. 'See page 38.
TR 21OB/310B Trunnion
тявт BUfe гюв & зюв тшппюп -V^b If you need a 5-axis
I s o l u t i o n for your
3-axis mill, look to the Haas TR 210B
and TR 310B Trunnion rotary tables
for a simple bolt-on solution for
machining complex parts. These
dual-axis trunnion
tables bolt directly
to the mill's table
to provide 5-axis
s i m u l t a n e o u s
motion or position
parts to nearly any angle
for multi-sided machining.
•±120° tilt, 360° rotation
• Simple bolt-on mounting
• Machine multiple sides in
one setup
• 23.5" max part swing
TR Trunnion Series
• Fast setups
• High accuracy & repeatability
• 12-month limited warranty
• Made in the USA
ID. Part* Description
A. TR210B Dual-Axis Trunnion Table
w/210mm Platter
B. TR310B Dual-Axis Trunnion Table
w/31 Omm Platter
Specifications and Dimensions
1\
EB-Axis
(Platter Height)
1
/S^~~
/
О
—
'о „О
atч
( )
р^/Сьгй\
\\
1 __Л 1= =
^ . .
\\
/
^/'^
[
В *•
DPar
DJ
У
1
O
0
Swing
;Шi
- G
0 01
Щ 0 «
\ оГ
5 (t=F-
о о
о) <Е.
0 С
С
DIIV
д
ВСD 0ЕFGН1J 0КLМ
/
/ 1
К \
\ / A-Axis Swing Clearance
" iv\ A'AxisCL Т /^"^jUPxx N ~^U
J I , Scale1 '''ISlot Detail (4X)
ENSIGNS (Inches Millimeters)
TR 210B 210 mm (8.27") TR 310B 310 mm (12.20")8.50 215,90 12.00 304,8028.03 711,96 33.4215.56 21.2123.50 31.0011.88 301,75 14.87538.50 52.00 1 320,8049.59 1 259,59 62.57 1 589,2826.21 665,73 33.0037.14 50.64 1286,2619.19 487,43 25.0016.64 422,66 21.8012.00 15.000.50 12,70 0.500.53 13,46 0.53
This is just one example of how the new Haas TR 210B and 310B
Trunnion tables can increase your productivity. They allow you
the ability to machine with full simultaneous five-axis motion
or position a workpiece to almost any angle.
B.
TR 21 OB TR 310B
SPINDLE
Table (Ib) (kg)
Brushless Control (Ib) (kg)
Rotary В axis Tilt A axis Rotary В axis
815 370
23.1 (2-axis) 14.2(1-axis) 10,4(2-axis) 6,4(1-axis)
Tilt A axis
Torque (ft-lb) (Nm)
Runout Max. (in) (mm)(Platter Pilot ID)
Backlash (arc-sec)
Speeds (%ec)
Brake Torque (ft-lb @ wo psi) (Nm @в,эьаг)
210 285
0.0005 0,0127
30
0.001 to 60
200 271
300 407
N/A
30
0.001 to 60
400 542
300 407
0.001 0,0254
30
0.001 to 50
500 678
300 407
N/A
30
0.001 to 50
1000 1356
INDEXING1
Accuracy (arc-sec)
Repeatability (arc-sec)
Resolution (°)
Max Rotation/Step (°)
±15
10
0.001
999.999
±35
10
0.001
±120
±15
10
0.001
999.999
±35
10
0.001
±120
MOTOR•••••••••••••••••••••шивииии и^^ииввии^вии^^
Type (hp AC servo) (kW AC servo)
Gear Ratio
Timing Belt
^ ^—.- ^—.i.--. ^ ^ ^ ——..———— .-.--.-.. ^ ^ ^ ^ ^ ^ ^ ^—
• •••HiHMMI HHH ^ ^ ^ m BH ^ H
1 0,7
90:1
2:1
3 2,
90:1
2:1
3 2,
72:1
3:1
••••••••••••••••M3 2,2
72:1
3:1
OPERATING SPECIFICATIONSDuty Cycle full/low speed
Operating Temp, (max ambient)
Power Required (VAC)
Max Air Pressure (psi) (bar)
50% /100%
100°F 38°C
230±10%@20amps
120 8,3
50% /100%
100°F 38°C
230±10%@20amps
120 8,3
50% /100%
100°F 38°C
230±10%@20amps
120 8,3
50% /100%
100°F 38°C
230±10%@20amps
120 8,3
PLATTER
Part Swing (max) (in) (mm)
Capacity (Ib) (kg)
Platter Diameter (in) (mm)
23.5 596,9
200 91
8.27 210
N/A
200 91
8.27 210
31 787,4
500 227
12.2 310
N/A
500 227
12.2 310
WEIGHT
1720 780
23.1 (2-axis) 14.2(1-axis) 10,4 (2-axis) 6,4(1-axis)
Due to continual development, all machine specifications are subject to change. 'See page 38.
Т5С Series
тятшт JM| , T5C 2, T5C 3, Т5С 4 - Use the T5C
to eliminate second and third
Щйг 4bJ operations by automatically
repositioning your parts to a new angle. All
four versions of the T5C feature fast
setup, and they increase
productivity by reducing
manual parts handling
and the number of tool
changes. With the T5C 2, 3
or 4, either two, three or four
parts can be machined completely
before making a tool change. Utilize
the full 360 degrees of spindle rotation
and 240 degrees of tilt to reach virtually any angle. Plus,
you can simulate 4th- and 5th-axis operations. All four
units feature the HRT 210 as the operating base for
tilting, and either one, two, three or four HA5C heads for
the 360 degrees of rotation.
1 Uses standard 5C collets1 Threaded spindle nose for chucks1 Coolant-resistant polyurethane
conduit & seals1 Fast, easy, flexible programming
• Interfacing via M function
• Variable feedrates
• Linear, arc & spiral milling
• 12-month limited warranty
• Made in the USA
Specifications and Dimensions
Т5(
DIMENSIONS(Inches Millimeters)
AAi 20.32 18.52
516,13 470,41В 0.70
17,78
С 10.20
259,08D 12.39
314,71E +907-120°
F 6.000
152,40(Ai - Brushless Models)
: Si
14' 4Cabl
g
ngle Spindle
3 mв Г-41
П1гшл
1( L
mу
3
@%-S4=
1
s1&
=1LA, A
>*
14--L UK"
\^ ' D
- * . .С
1 1
1 1
E ••~
V — '1—f
•., Ill3t
o!:
T5C Two, Three & Four Spindle
DIMENSIONS (Inches Millimeters)
T5C-333.64
854,460.55
13,97
5.000 TYP
127TYP
10.30
261,62
12.39
314,71
1.50
38,10
+907-120°
6.000
152,40
T5C-438.64
981,460.55
13,97
5.000 TYP
127 TYP
10.30
261,6212.39
314,711.50
38,10
+907-120°
6.000
152,40
Т5С Series
ID. Part* Description
A. T5C Tilting 5-Axis Rotary Table, HRT 210
tilting w/HASC rotation
B. Т 5 С 2 Tilting 5-Axis Rotary Table, HRT 210
tilting w/HASC 2 rotation
C. Т5С 3 Tilting 5-Axis Rotary Table, HRT 210
tilting, w/HASC 3 rotation
D. T 5 C 4 Tilting 5-Axis Rotary Table, HRT 210
tilting, w/HASC 4 rotation
T5C: One, Two, Three & Four Spindle Configuration
£431
Collet closers not supplied. Use AC-25 or AC-125. See pages 30-31.
T5C (combines an)
SPINDLE
Torque (ft-lb) (Mmi
Brushless (ft-lb) (Mm)
Runout Max (in) (mm)
Backlash (arc-sec)
Speeds (°/sec)
Tooling
Center Height (in) (mm)
Brake Torque (ft-lb @ 100 psi)(Nm @6,9bar)
INDEXING1
Accuracy (arc-sec)
Repeatability (arc-sec)
Resolution (°)
Max Rotation/Step (°)
Worm Gear Diameter (in) (mm)
^^__H_____l_>_B_a_..aMa__l_l____i^__^^^_^___
MOTOR
Type (hp DC servo) (kW DC servo)
Brushless (hp AC servo) (kW AC servo)
Gear Ratio (worm & gear)
Timing Belt
••«••« • •«••••• •••••••««•• •«••••• ••B
OPERATING SPECIFICATIONS
Duty Cycle full/low speed
Operating Temp, (max ambient)
Power Required (VAC)
Max Air Pressure (psi) (bar)
HRT 210 (with an)
I SPINDLE
210 285
210 285
0.0005 0,0127
30
0.001 to 60
6 std T-slots @ 60°
6.000 ±0.001 152,4 ±0,025 4
200 271
Torque (ft-lb) (Nm)
Brushless (ft-lb) (Nm)
Runout Max (in) (mm)
Backlash (arc-sec)
Speeds (°/sec)
Collets (in)
Nose Thread (in)
Center Height (in) imm)
INDEXING1
±15
10
0.001
999.999
6.3 160
Accuracy (arc-sec)
Repeatability (arc-sec)
Resolution (°)
Max Rotation/Step (°)
Worm Gear Diameter (in) (mm)
MOTOR
1.5 1,1
1.0 0,7
90:1
2:1
Type (hp DC servo) (kW DC servo)
Brushless (hp AC servo) (kW AC servo)
Gear Ratio (worm & gear)
OPERATING SPECIFICATIONS |
50% /100%
100°F
115±15%@15A
120
WEIGHT
Table (Ib)Control (Ib)
165
17(2-axis) 13(1-axis)7,7(2-axis) 5,9(1-axis)
Duty Cycle full/low speed
Operating Temp. (max. ambient)
Power Required (VAC)
Max. Air Pressure (psi) (bar)
HA5C
45 Б1
60 81
0.0004 0,0102
40
0.001 to 270
std5C(VBi-1Vi6)
23/16-10
4.000 ±0.001
±30
10
0.001
999.999
2.8
0.5 0,4
0.75 0,6
60:1
75% ©full speed
100°F 38°C
1 15 ±5% @ Samps
120
HA5C2
20 (per spindle)
25 34
0.0004 0,0102
50
0.001 to 200
std5C(Vw-1Vi6)
23/16-10
5.875 ±0.002149,2 ±0,050 8
±60
10
0.001
999.999
2.8 71
0.5 0,4
0.75 0,6
60:1
75% ©full speed
100°F
1 15 ±5% @ Samps
120
HA5C 3*
HA5C 4*
20 (per spindle)25 У\
0.0004 0,0102
50
0.001 to 200
std5C(V»-1Vi6)
23/16-10
5.875 ±0.002149,2 ±0,050 8
±60
10
0.001
999.999
2.8
1.5 1,1
1.0 0,7
60:1
75% @ full speed
100°F
1 1 5 ±5% @ 3 amps
120
Rotary Head (Ib)
Control (Ib)
48 120 168(3HD) 250 (4HD)
17(2-axis) 13(1 -axis) ',7 (2-axis) 5,9(1-axis)
Brushless Control ( lb)(kg) 23.1 (2-axis) 14.2(1-axis)10,4(2-axis) 6,4(1-axis)
Brushless Control (Ib) (kg) 23.1 (2-axis) 14.2(1-axis) 10,4 (2-axis)
* Not for use with tailstocks. "Without tailstock. 'See page 38.Due to continual development, all machine specifications are subject to change.
HA2TS
T he HA2TS is a self-contained setup of two HASCs and
two pneumatic tailstocks mounted on a subplate.
Utilizing this high-productivity design guarantees
accurate alignment while maintaining high output. The HA2TS
features fast setups, and increases productivity by reducing the
number of tool changes and handling time. The tailstocks adjust
to the length of your parts by sliding on T-slots.
The minimum distance from HA5C to tailstock when the spindle
is extended is 2.30", while the maximum distance is 12". The
distance between centers is 5".
Tailstocks
ID. Part*A. HA2TS
Description
Dual Spindle Mounted on Plate wДailstocks
MADE IN USA
I (
Ш" *ВД^|||№
A.
Collet closers not included. Use AC-25 or AC-125. See pages 32-33.
Specifications and Dimensions
HA2TS - Top View
DIMENSIONS (Inches Millimeters)
19.50
9.875
5.00 ±0.0005
2.30 min
9.95
17.50
495,30250,83127,00 ±0,012 7
58,42 min252,73
444,50
HA2TS - Side ViewA
DIMENSIONS (Inches Millimeters)
A 12.00 max
В 2.50 min
С 1.875
D 29.50
304,80 max
63,50 min
47,63749,30
J
Pneumatic Tailstocks
ID. Part # Description
A. HPTS14.5 Pneumatic Tailstock,
14.5" (368,3 mm) center height for HRT 600
HPTS11.51 Pneumatic Tailstock,
11.5" (292,1 mm) center height for HRT 450
B. HPTS9 Pneumatic Tailstock,
9" (228,6 mm) center height for HRT 310
C. HPTS6 Pneumatic Tailstock,
6" (152,4 mm) center height for HRT 210
D. HPTS5 Pneumatic Tailstock,
5" (127 mm) center height for HRT 160
E. HPTS4 Pneumatic Tailstock,
4" (101,6 mm) center height for HA5C
Manual Tailstocks
ID. Part# Description
HTS14.51 Tailstock, 14.5" (368,3 mm) center height for HRT 600
F. HTS11.5 Tailstock, 11.5" (292,1 mm) center height for HRT 450
G. HTS9 Tailstock, 9" (228,6 mm) center height for HRT 310
H. HTS6 Tailstock, 6" (152,4 mm) center height for HRT 210
J. HTS5 Tailstock, 5" (127 mm) center height for HRT 160
K. HTS4 Tailstock, 4" (101,6 mm) center height for HA5C
Tailstocks
Tailstocks are available for all Haas rotary
products. All mounting surfaces of our
tailstocks are accurately ground, the spindles
are individually fitted to their bores for minimum
deflection, and bottom alignment pins are provided
for fast setup without indicating. Tailstocks are
available in manual or pneumatic types, with center
heights to match corresponding Haas rotary products.
All tailstocks are Morse taper #3. Live centers are
recommended, but not included.
A.F.
K.
'Not Shown
Tailstocks
Specifications and Dimensions
Pneumatic Tailstocks
DIMENSIONS (Inches Millimeters)
AВСDEFGHJКLMN
AВСDEFGHJКLMN
HPTS4
4.000 ±0.001
2.75
0.53
4.00
6.00
11.715
2.50 Travel
0.525
6.280 ±0.01
2.25
3.00 ±0.0003
0.425
7.50
HPTS66.000 ±0.001
2.75
0.53
4.00
6.00
11.7152.50 Travel
0.5256.280+0.01
2.25
3.000 ±0.0003
0.425
7.50
101,6 ±0,025 469,8513,462101,60152,40
297,561
63,50 Travel
13,335159,512+0,254
57,15
76,2+0,00762
10,795190,50
152,4+0,025469,85
13,462101,60
152,40
297,561
63,50 Travel13,335
159,512 ±0,254
57,15
76,2 ±0,007 62
10,795
190,50
HPTS55.000 ±0.001
2.75
0.53
4.00
6.00
11.715
2.50 Travel
0.525
6.280 ±0.01
2.25
3.00 ±0.0003
0.425
7.50
HPTS99.000 ±0.0012.75
0.53
4.00
6.00
11.715
2.50 Travel
0.525
6.280 ±0.01
2.25
3.000 ±0.0003
0.425
7.50
127+0,0254
69,85
13,462
101,60
152,40
297,56163,50 Travel
13,335
159,512 ±0,254
57,1576,2+0,00762
10,795190,50
228,6 ±0,025 4
69,85
13,462
101,60
152,40
297,561
63,50 Travel
13,335
159,512 ±0,254
57,15
76,2+0,00762
10,795
190,50
DIMENSIONS (Inches Millimeters)
А
В
СDЕFGHJКLM0N
HPTS11.511.50 ±0.001 292,1 ±0,025 4
2.75
0.53
5.50
6.75
11.715
2.50 Travel
0.525
63,50 Travel
8.28
2.75
4.000+0.0003 •'. 1,6 ±0,007 620.625+0.001 15,875+0,0254
9.50
HPTS14.14.50 ±0.001
2.75
0.53
5.50
6.75
11.715
2.50 Travel
0.525
8.28
2.75
4.000 +0.0003
0.625 ±0.001
9.50
5368,3 ±0,025 4
69,8513,462
139,70
171,45
297,561
63,50 Travel
13,335210,312
69,85
101,6 ±0,007 6215,875 ±0,025 4
241,30
HA2TS Two-Spindle with Tailstocks
Torque (ft-lb)
Brushless (ft-lb) (Nin)
Runout Max (in)
Speeds (°/sec)
Collets (in)
Nose Thread (in)
Spindle Center (in) lr"
30
45 G1
0.0004
0.001 to 200
std5C(1/H-11/i6)
23/i6-10
s t d 5 C ( 0 , 4 t o 2 7 )
5.875+0.002 149,2
INDEXING1
Accuracy (arc-sec)
Repeatability (arc-sec)
Backlash (arc-sec)
Worm Gear Diameter (in)
Resolution (°)
Max Step Size (°)
±60
10
50
2.8 71.1
0.001
999.999
Type (hp DC servo)
Brushless (hp AC servo) (kvV
Gear Ratio (worm & gear)
OPERATING SPECIFICATIONS
Duty Cycle
Operating Temp, (max ambient)
Power Required (VAC)
0.5 u.'i
0.75 0,6
60:1
•I75% @ full speed
100°F
115 VAC+5% @ Samps
Rotary Head (lb)(kg) 280
Control (Ib) (kg) 13
Brushless Control (Ib) (kg) 14.2
Due to continual development, all machine specifications are subject to change.
A Haas tailstock used to support an extra-long workpiece
with complex cutting requirements. Haas tailstocks are
available for every size rotary table in our line, and are
available in manual or pneumatic types.
Specifications and Dimensions
Manual Tailstocks
j
'
В
/j
i\
\
L
fl ^C
О
ТГ
DF
F
^
A\ '
J) ---
_\
H -i
-z3Г21 - a
•,].
DIMENSIONS (Inches Millimeters)
HTS4AВСQ
EFGHJКL
4.000 ±0.001 101, 6 ±0,025 4
2.75 69,85
#3 Morse Tapern c;1)
4.0013 462
101,60
2.50 Travel 63,50 Travel0.632.250.507.50
Ib.UU
57,1512,70190,50
6.280+0.01 159,512+0,254M 3.000 ±0.0003 76,2 ±0,007 62NP
3.44 87,380 0.625+0.001 15,875 ±0,025 4
HTS6AВСDEFGHJКLMNP
6.000+0.001 152,4 ±0,02542.75 69,85#3 Morse Taper0.534.002.50 Travel 63,50 Travel0.632.25 57,150.507.506.280 ±0.01 159,51 2 ±0,2543.000 ±0.0003 76,2+0,007623.44 87,37
0 0.625+0.001 15,875 ±0,025 4
MRi
, г- -M-J
I[ ~
LocatingPins
N —
HTS55.000 ±0.001 127 ±0,0254
2.75 69,85
#3П R
Morse TaperQ fl P'-
4.00 101,602.50 Travel 63,50 Travel0.63 16,002.25 57,150.50 12,707.50 190,506.280 ±0.01 159,512 ±0,2543.000 ±0.0003 76,2 +0,00762
3.440.625+0.001 15,875+0,0254
HTS99.000 ±0.001 228,6 ±0,025 42.75 69,85#3 Morse Taper0.53 13,4624.00 101,602.50 Travel 63,50 Travel0.63 16,002.25 57,150.507.50 190,506.280 ±0.01 159,512+0,2543.000+0.0003 76,2+0,007623.440.625+0.001 15,875+0,0254
} ~F\ ^3\в
A
|
^ —
JJ ?k JT Пт-/ о \и в \
^JN^e!//} ( '"
у V
JLD
— E —
I T'\ L— -_1 Г" ™»---wTm~ — rrf
^-ч /^
1
1
1 I 1
- И
-^ imm „
Pins
DIMENSIONS (Inches Millimeters)
NTS 11. 5 HTS14.5A 11.500+0.001292,1+0,0254 14.500 ±0.001 368,3+0,0254В 2.75 2.75С #3 Morse Taper #3 Morse TaperD 0.53 13,462 0.53 13,462E 5.50 139,70 5.50 139,70F 2.50 Travel 63,50 Travel 2.50 Travel 63,50 TravelG 0.63 16,00 0.63 16,00H0 0.625 ±0.001 15,875+0,0254 0.625 ±0.001 15,875 ±0,025 4J 8.28 210,312 8.28 210,312К 4.000 ±0.0003 101, 6 ±0,007 62 4.000 ±0.0003 101 ,6 ±0,007 62L 9.50 241,30 9.50 241,30M 2.75 69,85 2.75 69,85N 2.44 61,98 2.44
QuikChange Tooling System
QuikCube System
Shown with Optional Cube
For increased productivity, add the Haas
QuikChange System to the Haas HRT 210 or
HRT A6 rotary table. The fixture cubes or
plates are loaded and released via pneumatic
actuator, allowing the user to change from
cube to cube (plate to plate) in less than
five seconds.
Productivity is increased by mounting
multiple parts to the fixtures, so more parts and
more sides are machined per setup. The result is
reduced cycle times, which means increased profits.
In addition, the operator can load parts on one
QuikChange fixture while another is being machined.
• Note: Repeatability is 0.0005 for cubes mounted on same system.
The QuikChange Tooling System is simple to use. Moving the lever on the back of the unit is all it takes
to quickly lock or unlock the cube or plate. Use several cubes to boost productivity - load parts on one
cube while the other is in-process. Mounting and removal of the cube or plate is simple and quick.
Specifications and Dimensions
QuikCube V-Lock Plate Air ActuatorHaas Rotary TableModel HRT 210
Front ViewDimensions of Cube:4.55" sq x 4.55" long115,57 mm sq x 115,57 mm long
Back View
DIMENSIONS(Inches Millimeters)
A 7.00
177,80
В 11.00
279,40
С 25.00
635,00
Side View
I
ЛI "
Shown with Optional Plate
Tooling Systems
ID. Part* DescriptionA. HQCCS QuikChange System
for HRT 210 (Cubes or plates not included)
HQCCSA6 QuikChange Systemfor HRT A6 (Cubes or plates not included)
TBS1601 Tooling Block Systemfor HRT 160
TBS 210 Tooling Block Systemfor HRT 210
TBS 3101 Tooling Block Systemfor HRT 310
B. CUBE1 Cube only
C. PLATE KIT1 QuikChange plate and support
PLATE QuikChange plate only
'Not Shown
C. QuikChange PlateV-Lock Plate Air Actuator
Front View
ft ffl:f И ,1 LJ IE
J I
§t
- — в
DIMENSIONS(Inches Millimeters)
Haas Rotary TableModel HRT 210
Side View
rti
2.00 min clearance
50,8 min clearance
11.00
279,40
33.46
1.00
25,40
8.00
203,20
10.00
254,00
Back View QuikChange Plate
A Haas QuikChange System used with a cube holding four partsper surface. Not only can you machine all four surfaces in oneload-unload motion, but a second cube (or plate) can be loadedwith parts while another is in-process for high productivity and
increased profits.
Tooling Block System
Another great productivity tool is the Haas Tooling Block
System, for mounting on any Haas HRT 160, HRT 210 or HRT 310
rotary table.
The Tooling Block System is made from 6061-T6 aluminum alloy
and can be easily machined to meet your requirements. The system
includes the aluminum tooling block, an outboard A-frame support
and a steel mounting plate. They are designed for bolt-together
alignment when used on a precision Ve" T-slot. Since the tombstone
can be loaded with 8, 12, 16 or more parts, all can be machined with
the same tool before going on to the next tool.
DIMENSIONS (Inches Millimeters)
f Part* Rotary Table
TBS160 HRT 160
TBS210 HRT 210
TBS210-20 HRT 210
TBS310 HRT 310
X (Length) Y (SO) Z (Center Dist.)
12.00 304,80 4.00 101,60 5.00 127,00
12.00 304,80 4.50 114,30 6.00 152,40
20.00 508,00 4.50 114,30 6.00 152,40
19.00 482,60 6.00 152,40 9.00 228,60
Air Collet Closers
H
AC-1Z5
aas offers three types of collet closers for
use on HA5C indexing heads. Each of the
three designs offers unique benefits you
should consider before making a selection. AC-125
and AC-25 use shop air to drive a piston through a
mechanical multiplier to close the collet. This provides greater
holding force and reduces operator fatigue, compared to
standard manual-handle closers. A simple flick of a lever causes the collet
to open or close without effort. On multi-spindle heads, one of these air-
actuated closers is required if you plan to use collets, because a standard
handle will not fit and is not included.
HA5C with AC-100 Installed
The AC-125 is our most popular design and provides up to
12,000 Ib of draw-tube force with 0.060" of travel - allowing part
diameter variation of 0.015" without readjusting the collet. Its
design is similar to the AC-25 but uses two pistons, which more
than double the available draw force. A large internal spring is
used for part release. The AC-125 can be tightened from the rear
and provides a Vie" thru-hole. Its compact size allows it to be
used with all models of HASCs, and with the use of a small spacer,
it can be operated vertically. Clamping force pressure is varied by
regulating air pressure supplied to the unit (normal operating
range is 45 to 60 psi). The AC-125 air collet closer can be used
with all types of 5C collets, including step collets. Closers will
not remain clamped if Loss of air occurs.
HA5C with AC-1Z5 Installed
DIMENSIONS (Inches Millimeters)
A
В
С
1.90
1.36
1.23
48,26
31,24
D0 4.00 101,60
E 0.312 (Thru) 7,925
Adjustable Drawbar
Operating Pressure 85-120 psi 5,861-8,275 barClamping Ability Adjustable 0-120 ft-lb 0-162,69 Nm
(1'0 steel Bar) (25,4 mm 0)Release Mechanism Air Actuated
DIMENSIONS (Inches Millimeters)
Collet Draw Force 0-10,000 Ib 4 536 kgClamping Mechanism Spring ActuatedDraw Bar ID 1Vs"0 Thru Hole (28,57 л
A 6.80 172,72
В 14.75 374,65
С 0 3.50 88,90
D 4.00 101,60
E 11.85
f 1.12 (Thru) 28,45 (Thru)
G0 4.98 126,49
AC-100
The AC-100 uses spring force for part clamping, and air
pressure for release. It will retain full part clamping even if air
pressure is removed. The AC-100 provides a IVs" diameter
thru-hole, and collets are easily tightened from the rear. It
provides up to 10,000 Ib of draw-tube force, with 0.025" travel,
and can be used for drilling and milling in most applications. The 0.025"
travel allows for a part diameter variation of 0.006" without the
need to readjust the collet. Due to its long rearward length, the
AC-100 cannot be used vertically, and is not recommended for
tilting HASCs. Also, some consideration must be given to clear-
ances when using the AC-100 parallel to the Y axis, as its length
may collide with the Z-axis waycover. Closers will remain clamped
if loss of air occurs.
Air collet closers reduce operator fatigue and provide greater
holding force on HA5C indexing heads - all with the simple flip
of a lever. Three different designs are available to meet your
machining needs.
Air Collet Closers A6-AC
ID.A.
Part*
AC-125
В. АС-100
С. АС-25
D. A6-AC
AC-Z5
Description
High Torque, 5/1б" Thru-HoleAir Collet Closer for HA5C
High Torque, 11/s" Thru-HoleAir Collet Closer for HA5C
Compact, Non Thru-HoleAir Collet Closer for HA5C
High-Torque, 13/4" Thru-HoleAir Collet Closer for HRTA6
The AC-25 is our smallest and most economical closer.
It fits entirely inside the HA5C body, and can be used both
vertically and horizontally. Since it utilizes air pressure to
close, part clamping pressure can be varied easily by
regulating the applied air pressure. The AC-25 provides
medium holding power of up to 3,000 pounds draw force, with
0.030" of travel, and is recommended for drilling and light
milling of collet-size parts. The 0.030" travel allows for a part
diameter variation of
0.007" without the
need to readjust the
collet. The AC-25
should not be used
with step collets. The
AC-25 does not have
a thru-hole, and
collets must be tightened using a 9/64" Allen wrench,
tightening through the collet. Collet stops may be used, but
must be drilled completely through to accommodate the
Allen wrench. Closers will not remain clamped if loss of air occurs.
The A6-AC pneumatic draw bar assembly works with A65C
and A616C collet adapter chucks to provide 5C and 16C air
collet closing capabilities for the HRT A6. With the A6-AC,
collets can be clamped with the flip of a switch. The A6-AC is
also compatible with 3J collet adapters that may be purchased
through your local tooling supplier.
The A6-AC provides up to 5,000
pounds of draw-tube force with
0.125" of travel. Clamping force
is spring actuated and adjustable
to 100 ft-lb. The A6-AC
tightens from the
rear, and has a
1.75" thru-hole.
Closers will remain
clamped if loss
of air occurs.
HRT A6 with A6-AC Installed
Operating Pressure 80-120 psi 5,51Clamping Ability Adjustable 0-100 ft-lb 0 125.581 P
[1"0 Steel Bar) ' 5 4 m m Q )Collet Draw Force Adjustable 0-5,000 Ib u-2268 kg
Collet Draw Adjustable 0-0.125" 0-3,175 mmClamping Mechanism Spring Actuated
DIMENSIONS (Inches )
A 2.21В 1.875-16UN-2BC0 1.75D 3.2E 10.07
О
Interface CablesA.
Haas offers a variety of cables to
make interfacing Haas Rotary Tables to
your machines quick and easy. We build
and test each interface cable assembly in our
state-of-the-art production facility. They feature manual and
M function interfaces and will connect any
Haas rotary product to most CNC
and manual machines.
Chucks
Eight-inch, 3-jaw chucks, models LC8A6-B & LC8-B, for the
HRT A6 and HRT 210 respectively, can be mounted in minutes
with superb accuracy and concentricity. For the
HA5C, the LC5C-B 5" 3-jaw chuck simply
threads onto the spindle nose. All required
hardware is supplied
by Haas.
Accessories
H.
8" & 11" Faceplates
The HRT A6 model can use the optional 8" or 11"
faceplates (models FP8 and FP11, shown here) to
accommodate your own special fixtures and parts. The recess
on the backside of the faceplate simply slips over the Al-6
platter and is bolted down. All required hardware is supplied
by Haas.
5C & 16C Collet Adapters
A 5C (A65C) or 16C (A616C) collet adapter can be mounted
on the HRT A6, and collets can be closed with the optional
factory-installed pneumatic draw tube assembly (A6AC). The
adapter from draw tube to collet is included with the A65C.
Keep in mind, the 5C spindle adapter has a
23Лб"-10 threaded nose, which can
be used for oversized collets,
collet chucks and small fixtures.
3J and 16C collet adapters can
also be used, and are available
from your tooling supplier.
All required hardware is supplied
by Haas.
HRT 210Optional Chuck Mounting
LC8-B - 8" (2 13 mm), 3-jaw chuck LC8A6
ID.A.
B.
C.
D.
E.
F.
Part*CA1417
CNC
RQS
IB
LC5C-B
LC8-B
DescriptionCable Adapter, 14 to 17 pin
Extra CNC Interface Cable
Remote Quill Switch
Interface Box & Cable
5" Solid Jaw, Reversible,3-Jaw Chuck for HA5C
8" Top Reversible,3-Jaw Chuck for HRT 210
ID. Part#
LC10-B1
LC6-B1
LC6A5-B1
G. FP11
H. FP8
J. AB5C
Description
10" 3-Jaw Chuck for HRT 310
6" Top Reversible,3-Jaw Chuck for HRT 160
6" A1 -5 Top Reversible,3-Jaw Chuck for HRT A5
11" A1 -6 Faceplate for HRT A6
8" A1 -6 Faceplate for HRT A6
5C Collet Chuck Adapter8" A1-B Top Reversible,3-Jaw Chuck for HRT A6
for HRT A6
'Not Shown
Applications
T his HA5C is being used for a simple,
point-to-point positioning applica-
tion. Used in this way, there are
360,000 different positions programm-
able to within 0.001°. A program can
contain up to 99 different steps and
each of these steps can be repeated up
to 999 times.
A n HA5C being used in a 4th-
axis milling application on a
Haas VF-1 CNC machining center.
With simple programming and easy
interfacing to any other CNC machine,
the HA5C functions competently as a
semi-fourth axis activated by one
M function. Both arc and spiral |
milling operations are easily
achievable. These attributes make
the HA5C the perfect alternative to cumbersome and expensive offshore fourth-axis
machines. A standard interface cable is included.
L oading a part is easy with the HA5C
manual collet closer. Install the collet
by aligning the keyway on the collet with
the key inside the HA5C spindle. Turn the
collet draw tube until proper collet
tightness is obtained, insert your part and
pull back on the handle to clamp.
A II T-slot rotary tables can be easily fitted with 3-jaw chucks. Flat-back chucks
are usually installed and aligned by clamping a bar a few
thousandths of an inch smaller than the diameter of the thru-hole and
leaving an inch or two hanging out the back of the chuck. Insert the bar into the
thru-hole of the rotary table, rotate the chuck until the bolt holes align with the
T-slots, then insert the T-nuts and bolts.
A ll Haas rotary products can be
used as a true fourth axis when
integrated on a Haas machining
center, or as a semi-fourth axis on
any other CNC machine by
programming a G94 code in the Haas
control. Simultaneous rotational
milling, as well as spiral milling, can
be easily achieved.
H A5C utilizing the 23Лб"-10 threaded spindle
nose to mount a 5" 3-jaw chuck. By entering a
G98 code, a circle can be evenly divided into
anywhere from 2 to 999 divisions. Also, odd-
numbered bolt circles and uneven hole spacing are
easily handled through simple programming.
Accessories ChartHA5C HA5C, 2, 3, 4 HRT 160
Collet Closers
AC-25 Compact, Non Thru-HoleAC-1OO High Torque, with 1" Thru-HoleAC-125 High Torque, with 5/16" Thru-HoleA6AC Pneumatic Draw Tube, 1 .75" I.D. Thru-HoleMANCCA Manual Collet Closer AssemblyHMDT Haas Manual Draw Tube
Chucks
LC5C-B 5" Adjust True, Solid Reversible, 3-JawLC8-B 8" Adjust True, Top, Reversible, 3-JawLC8A6-B 8" Adjust True, A1-6 Top Reversible, 3-JawLC1O-B 10" Adjust True, Top Reversible, 3-JawLC6-B 6" Adjust True, Top Reversible, 3-JawLC6A5-B 6" Adjust True, A1-5 Top Reversible, 3-Jaw
Haas Tailstocks #3 Morse Taper1
HTS4 Manual Tailstock, 4" Center HeightHTS5 Manual Tailstock, 5" Center HeightHTS6 Manual Tailstock, 6" Center HeightHTS9 Manual Tailstock, 9"HTS11.5 Manual TailstockHTS14.5 Manual Tailstock
Center Height1 1.5" Center Height14.5" Center Height
HPTS4 Pneumatic Tailstock, 4" Center HeightHPTS5 Pneumatic Tailstock, 5" Center HeightHPTS6 Pneumatic Tailstock, 6"HPTS9 Pneumatic Tailstock, 9"HPTS11.5 Pneumatic Tailstock
Center HeightCenter Height1 1.5" Center Height
HPTS14.5 Pneumatic Tailstock, 14.5" Center Height
HRT A6 Accessories
FP8 8" A6 FaceplateFP11 11" A6 FaceplateA65C 5C Collet ChuckA616C 16C Collet ChuckHQCCSA6 QuikChange System (cube or plates not included)HQCA6KIT Adapter Kit (HQCCS required to adapt to HRT A6)
Fixturing Accessories
HQCCS QuikChange System (cube or plates not included)CUBE QuikChange Cube (4.55" cubed)PLATEKIT QuikChange Plate and Support - Use with HQCCSPLATE QuikChange Plate Only (8"W x 1O1 " x 1 ")TBS-160 Complete Tooling Block System (12" length x 4"square)TBS-210 Complete Tooling Block System (12" length x 4.5"square)TBS-21O-2O Complete Tooling Block (20" length x 4"square)TBS-31O Complete Tooling Block System (19" length x 6"square)ADP5 Adapter Plate Only, HRT 160ADP6 Adapter Plate Only, HRT 21 ОADP9 Adapter Plate Only, HRT 31 ОBLK5-12 Aluminum Tombstone Only, 4" x 4" x 12"BLK6-12 Aluminum Tombstone Only, 4.5" x 4.5" x 1 2"BLK6-2O Aluminum Tombstone Only, 4.5" x 4.5" x 2O"BLK9-16 Aluminum Tombstone Only, 6" x 6" x 19"SUPS A-Frame Support Only, HRT 1 6O (5"Center)SUP6 A-Frame Support Only, HRT 210 (6"Center)SUP9 A-Frame Support Only, HRT 310 (9"Center)SUP5XP A-Frame Support, Plain Bearing, for HRT 210M/HS-1R (6"Center)SUP5XR A-Frame Support, Needle Bearing, for HRT 210M/HS-1R (6"Center)20-4333 A-Frame Support for HRT 210 w/Half Plain Bearing20-4334 Riser Block for HRT 21 OM
Accessory Cables
EXT17 Motor Extension Cable, 1O ft.CA1417 Cable Adaptor, 14 pin control to 1 7 pin rotaryCA1714 Cable Adaptor, 17 pin control to 14 pin rotary
Interfaces
CNC Extra CNC Interface Cable, 15 ft. • • •RQS Remote Quill Switch • • •C N C 3 O Extra C N C Interface Cable, 3 O f t . . . .CNC-VF1 CNC Interface Cable for Haas Machines • • •
'Use live center only (not provided).2 Not available for HRT210SP. ST5C only. "HRT210M only. 'HRT A5 only. 'HRT A6 only. 'Not compatible with AC brushless models. All prices subject to change™
HRT210 HRTA5/A6 HRT310 HRT 450 HRT 600 T5C, 2,3,4 TRT160,210 HRT210SHS
i\- ttat prior notice. 15% restocking charge on all returns/exchanges.
General Definitions. Terms & Conditions
Accuracy Critical Alignments
Accuracy is measured in an unloaded condition without
any attachments. Important note! User's fixtures, size and
weight of part, off-center parts, outboard supports,
tailstock pressures, off-center axis drilling and milling,
inadequate or uneven fixture mounting surfaces, out of
alignment (TIR) tailstocks or supports, etc., will all affect your
indexing accuracy results.
Customer Modifications
The customer assumes all responsibility for modifications.
Your warranty is void if you disassemble the motor covers or
remove any portion of the worm, spindle or related parts. We do
not recommend that customers adjust backlash, as this is
extremely critical to the life of the unit. Customers who install
chucks and air collets assume all responsibility for damage done.
We highly recommend having these devices installed by Haas.
Torque RatingsQuoted torque is peak torque for short durations only. Units
that have high duty cycles (>50%) cannot sustain peak torque.
Excessive torque demands are usually the result of an undersized
table, excessive tailstock pressure or misaligned end supports.
Alignments of outboard supports to the indexing device are
critical. Alignments must be within a maximum 0.005" TIR. If the
runout of the part is greater, or if the tailstock support is not
centered to the table axis, you are in effect bending the part.
This requires substantial energy and causes indexing inaccuracy
as well as substantially reducing the life of the indexing device.
Fixture and parts should not exceed one-half the weight of the
unit without tailstock.
Responsibility
The user is solely responsible for properly sizing the rotary
table to the work required. A good rule of thumb is that the
working size of the part should not exceed the diameter of the
worm gear. Working outside this dimension requires significantly
fewer feeds and loads. Another rule is that the part and fixture
should not exceed one-half the weight of the indexing device
without tailstock.
Warranty — 12-monthLimited Warranty
All warranty work is provided at Haas Automation, Inc., in
Oxnard, California. The user is responsible for first obtaining an
RMA number, and then returning the unit to Haas. We will return
the unit, freight pre-paid, via ground service. Allow 10 working
days for repairs. Faster turn-around is available at additional cost.
> Specifications subject to change without notice.
www.HaasCNC.com
28OO Sturgis Road, Oxnard, CA 93O3O
Phone: 805-278-18OO
Fax: 805-278-8540
Going On-Line at www.HaasCNC.com
Online Rotary Table Calculator
You can find online help choosing the correct Haas rotary
table to fit your needs by going to www.HaasCNC.com. Click
through to the rotary table area in the products category.
Follow the instructions and answer a few simple questions about
your manufacturing requirements. The Haas online rotary
calculator will make a number of product suggestions based on
your needs. Then, you can explore the suggested product's
capabilities and specifications.
Find Your Rotary Distributor
To find your local Haas rotary and CNC machine tool
distributor online, go to www.HaasCNC.com, click on the dealer
network category and follow the instructions. You will find the
Haas world-wide, factory-authorized CNC distributor network
and a USA-specific zip code quick-find search option.
Contacting Haas Automation
To contact Haas Automation directly, call 1-800-331-6746
and ask for inside sales. Our sales assistants will answer all your
questions and direct you to your local Haas rotary and CNC
machine tool distributor. Alternately, you can contact Haas at:
Phone: 805-331-6746
Fax: 805-278-8540
Mail: 2800 Sturgis Road, Oxnard, CA 93030 - USA
The All-New Haas Website
Wouldn't it be great to have a salesman available
24 hours a day? To have your most detailed questions
answered instantly? To get an accurate price quote that
includes the latest promotions?
At HaasCNC.com you can have all this and more.
Our new website provides all the information that
is important to YOU. What you need, when you want it,
all online.
ft•лиг
IP'i,,.,**
Haas Automation, Inc.2800 Sturgis Road • Oxnard, California • 93030
Toll Free: 800-331-6746 Fax: 805-278-8540
www.HaasCNC.com
01.07.0200