h1/h3/h7/h8/h9/h11/hb3/hb4/hi2 product specification ... · installing led & check led...
TRANSCRIPT
H1/H3/H7/H8/H9/H11/HB3/HB4/HI2
Technical Assistance
H4
Product Specification
36W
DC12-24V
6000 Lumens (3000 x 2)
4000 Lumens (2000 x 2)
IP65
CREE XHP50 / LUMILED
5700 Kelvin
Aviation aluminium 6063
>30000hrs
-40°C ~+80°C
Input Power
Operating Voltage
Luminous Flux (Cree)
(Lumiled)
IP Rating
Light Source Model
Colour Temperature
Heat Dissipation
Operating Life
Operating Temperature
Ultra Compact Heat SinkIf you need assistance setting up or using your product now or in the future, call Aerpro Support.Australia
TEL: +61 3 8587 8898FAX: +61 3 8587 8866
Mon-Fri 9am – 5pm AEST
Please retain this user guide for future reference.
For help with installation go to www. or scan the QR codehttps://aerpro.com/products/LED_Headlights
www.aerpro.com
PRODUCT MANUAL1 2
3 4
5 6
1 2
3 4
1 2
3 4
5 6
www.aerpro.com
H1/H3/H7/H8/H9/H11/HB3/HB4/HI2
1 2
3 4
5 6
Can be secured to vehicle withcable ties, screws or 3M tape
(not included)
Check orientation/polarity of connectors
Can be secured to vehicle withcable ties, screws or 3M tape
(not included)
Check orientation/polarity of connectors
NOTE: These LED Headlight globes come pre-aligned to match the factory globes of most vehicles. If adjustment is required, rotate the globe in the collar or use allen key provided for alignment.
or models with adjustable collar, remove and lock in position before installing LED & check LED alignment LED Alignment
Dual Beam LED Alignment
Head light front view
LED beam points left & right
Re�ector points up to match factory globe
Not up & down
Can be secured to vehicle withcable ties, screws or 3M tape
(not included)
Check orientation/polarity of connectors
Trouble ShootingPlease check the list below to help with problem solvingor before contacting our technical department.
Fault Procedure
1. Check all connections, condition & orientation2. Check vehicles fuses3. Try both LED’s and regulators in the kit4. Replace the factory OEM bulbs and check they work to isolate a problem with the LED’s