Product informationThe new Tungsram High Bay LED luminaire is an exceptional mixture of value and performance. The product range has been upgraded to reach very high efficacy up to 177 lm/w and cover lumen packages between 10,000 – 60,000 lumens. The range includes DALI and various sensor versions, such as the Nedap Luxon IoT Node, to enable internet connection and wireless control of the luminaire range. With the improved efficacy, wide range of control options and higher lumen output, the High Bay is an ideal choice to replace high watt HID and T5/T8 LFL fixtures in high bay and low bay applications, in industrial and commercial buildings.

Applications• Designed to meet recommended luminance and illuminance requirements for High bay and Low bay applications

Housing• Combination of steel and aluminium housing• High Bay Series’ design accommodates 1 or 2 modules with 2 LED units per module• IK10 protection level for Fix output and DALI versions.• IK 08 for sensor types, IK03 for Emergency version.

ControlsAvailable with various driver and sensor options. All DALI drivers use DALI1 protocol.• Fixed output for Standard (S) series only• 1H25, 2H30, 1S22 and 1S30 has 2 drivers, DALI versions have 2 DALI

addresses.• DALI with High (H) and with standard (S) series.• Motion & lux sensor – enables standalone fixture control up to 15m

installation height. Can be used with Standard (S) series only.• RF wireless sensor – enables control for groups of fixtures with RF

(Radio Frequency) sensor in a local lighting control system grid with-out additional DALI wires, up to 15m installation height. Can be used with High (H) and Standard (S) series as well.

Emergency Option• Emergency mode is optional (‘EA’ in order logic/options 1).• Emergency versions are assembled with Tridonic Converter Kit (EM

converterLED ST 200 V). Tridonic battery pack can provide EM lighting for 3 hours duration.

• Battery can provide EM lighting for 3 hours duration. • Emergency Lighting LED Driver has self-test function as per IEC

62034.

Finish• Painted white finish with standard color: RAL 9016

RatingsTemperature rated at -30°C to +60°C

1H10 L80B50 > 85 000 @Ta 60 °C1H10 L80B50 > 116 000 @Ta 25 °C1H15 L80B50 > 96 000 @Ta 50 °C1H15 L80B50 > 116 000 @Ta 25 °C1H20 L80B50 > 76 000 @Ta 60 °C1H20 L80B50 > 105 000 @Ta 25 °C1H25 L80B50 > 70 000 @Ta 50 °C1H25 L80B50 > 88 000 @Ta 25 °C2H30 L80B50 > 87 000 @Ta 60 °C2H30 L80B50 > 116 000 @Ta 25 °C2H45 L80B50 > 75 000 @Ta 50 °C2H45 L80B50 > 94 000 @Ta 25 °C1S10 L80B50 > 139 000 @Ta 50 °C1S10 L80B50 > 238 000 @Ta 25 °C1S12 L80B50 > 88 000 @Ta 50 °C1S12 L80B50 > 149 000 @Ta 25 °C1S20 L80B50 > 88 000 @Ta 50 °C1S20 L80B50 > 149 000 @Ta 25 °C1S22 L80B50 > 54 000 @Ta 50 °C1S22 L80B50 > 93 000 @Ta 25 °C1S30 L80B50 > 54 000 @Ta 50 °C1S30 L80B50 > 93 000 @Ta 25 °C2S60 L80B50 > 51 000 @Ta 40 °C2S60 L80B50 > 71 000 @Ta 25 °C

Mounting• Various mounting options: Cable or threaded rod kit. Mounting

accessories need to be ordered separately.

DAT

ASH

EET

High BayIP20 IK08

ORIGIN

HUNGARIAN

30°, 60°,90°,120°

18

Order Logic

Our products are in compliance with IEC 60598-2-1:1979+A1:1987 used in conjunction with IEC 60598-1:2014.* 1H25, 2H30, 1S22 and 1S30 has 2 drivers and DALI versions have 2 DALI addresses.** Fix output and sensor versions could have slightly different values *** 2S60 is available at FX and SN version.

Prod

uct I

D

Mod

ule

/ Effi

cien

cy /

Lum

en

CCT

/ CRI

Opt

ic

Cont

rol

Opt

ions

1

TU HB IP20 G1

1H10 - 1M High 10klm

1H15 - 1M High 15klm

1H20 - 1M High 20klm

1H25 - 1M High 25klm

2H30 - 2M High 30klm

2H45 - 2M High 45klm

4K-4000K 70 CRI70

5K-5000K 70 CRI70

4K-4000K 80 CRI80

5K-5000K 80 CRI80

C1-120° Clear

D1-100° Diffuse

U1 - 80° Diffuse

L9-90° Clear

L6-60° Clear

L3-30° Clear

DL-DALI

RF-RF sensor(Motion and Lux)

ST-Standard

EA-EM auto-test

TU High bay - High efficiency

CCT/CRI multipliers

5K70 100%5K80 96%4K70 96%4K80 95%

Optical multipliers

C1 100%D1 90%U1 94%L9 100%L6 101%L3 98%

Module / Efficiency / Lumen

5000K 70CRI Clear 120° Optics DALI Driver

Module Power(W)** Lumen lm/W

1H10 1 56 9900 1771H15 1 85 15000 1761H20 1 116 19500 168

1H25* 1 155 25000 1612H30* 2 170 29200 1722H45 2 272 45200 1661S10 1 67 9670 1441S12 1 92 13500 1471S20 1 141 19900 141

1S22* 1 162 23500 1451S30* 1 199 29200 1472S60 2 435 60000 138

TU HB IP20 G1

1S10 - 1M Std 10klm

1S12 - 1M Std 12 klm

1S20 - 1M Std 20klm

1S22 - 1M Std 22 klm

1S30 - 1M Std 30klm

2S60 - 2M Std 60klm ***

4K-4000K 70 CRI70

5K-5000K 70 CRI70

4K-4000K 80 CRI80

5K-5000K 80 CRI80

C1-120° Clear

D1-100° Diffuse

L9-90° Clear

L6-60° Clear

L3-30° Clear

FX-Fix output

DL-DALI

SN-Sensor (On/OFF)

RF-RF sensor(Motion and Lux)

ST-Standard

EA-EM auto-test

TU High bay - Standard Efficiency

LED & Optical Assembly• IP50 protection level for the optical compartment for al lenses - 30, 60 and 90 degree optics are dust protected.• TU HB Series optical system enables LEDs to provide optimised illumination for open floor and racked aisles with photometric distributions of 30, 60 and 90 degrees achieved with Lenses (L). Optics are designed for commercial & industrial applications where mounting height, fixture spacing & light levels help determine optical selection.• A high performance product utilising top performing LED chips with three MacAdam steps, offering exceptional reliability.• 4000K & 5000K versions with 70 & 80 CRI.

Remote controller accessoriesNeed to be ordered separately:• Remote controller - 93110511

Electrical• 220-240V/50-60Hz• System power factor is >90% and THD <20%

Photometric data

200

300

400

cd 1000 lmC0 - C180 C90 - C270

0° 15° 30°

45°

60°

75°

90°

105°105°

90°

75°

60°

45°

30° 15° 0°

200

300

400

500

cd 1000 lmC0 - C180 C90 - C270

0° 15° 30°

45°

60°

75°

90°

105°105°

90°

75°

60°

45°

30° 15° 0°

C1 D1

L9 L6

L3 U1

Mounting & Accessories

Mounting Options Image Accessories

Rod Mount (optional)Available on all fixture configurations. Attaches to M10 threaded rod(rod and nuts not included).

TU HB Bracket kit 931085642 pcs / kit

TUHB Bracket kit 9311676220 pcs / 10 kits

Y-Cable w/hook (optional)Use with Standard Mounting Option only.Order separately. Sold per pair - suitable for one fixture1.5 m, 3 m, 4.5 m, 6 m lengths available.

93091603 1.5m cable - 93091603

YCABLEHOOK05FTPAIR - 5 FOOT PAIR 5 FT

93091604 3 m cable

YCABLEHOOK10FTPAIR - 10 FOOT PAIR

93091605 4.5 m cable

YCABLEHOOK15FTPAIR - 15 FOOT PAIR

93091686 6 m cable

YCABLEHOOK20FTPAIR - 20 FT PAIR 20 FT

Tilted bracket kit (optional)Available on all fixture configurations. Kit needs to be ordered separately.

93104725 Using tilted brackets - 2 pcs / kit - the Rod

Mount TUHB bracket kit has to be ordered as well.

Busbar bracket kit (optional)Available on all fixture configurations. Kit needs to be ordered separately.

93116910 TU HB lighting busbar bracket kit - single pack

93116861TU HB lighting busbar bracket kit - 5 pack

Dimensions (mm)

We in Tungsram Operations Kft. are constantly developing and improving our products. For this reason, all product descriptions in this catalogue are intended as a general guide, and we may change specifications from time to time in the interest of product development, without prior notification or public announcement. All descriptions in this publication present only general particulars of the goods to which they refer and shall not form part of any contract. Data in this guide has been obtained in controlled experimental conditions. However, Tungsram cannot accept any liability arising from the reliance on such data to the extent permitted by law. High Bay Datasheet – February 2020 tungsram.com

~385

~57

~250

~73

(NL)

~75

)EA)

~88

(NL)

(EA)

~422

(EA)

~457

(SN

) (RF

)

~488

(SN

) (RF

) )EA

)

~750

~786

(EA)

~822

(SN

) (RF

)

~855

(SN

) (RF

) )EA

)

Module * Weight1 2 kg

2 4 kg

* Emergency version weight additional 1 kg