gulf laboratories co. w.l.l. · shabeek k v . 6. sotero delacruz . 7. 2.99 aggregates aashto t -...

This is to attest that

GULF LABORATORIES CO. W.L.L. ST. NO. 2, SALWA INDUSTRIAL AREA

P.O. BOX 4024 DOHA QATAR

Testing Laboratory TL-373

has met the requirements of AC89, IAS Accreditation Criteria for Testing Laboratories, and has demonstrated compliance with ISO/IEC Standard 17025:2017, General requirements for the competence of testing and calibration laboratories. This organization is accredited to provide the services specified in the scope of accreditation maintained on the IAS website (www.iasonline.org).

This certificate is valid up to June 1, 2022.

This accreditation certificate supersedes any IAS accreditation bearing an earlier effective date. The certificate becomes invalid upon suspension, cancellation or revocation of accreditation. See www.iasonline.org for current accreditation information, or contact IAS at 562-364-8201.

Raj Nathan President

http://www.iasonline.org/


International Accreditation Service, Inc. 3060 Saturn Street, Suite 100, Brea, California 92821 U.S.A.

Telephone +1 562-364-8201 — [email protected] www.iasonline.org Page 1 of 164

IAS Accreditation Number TL-373 Company Name Gulf Laboratories Co. W.L.L. Address Building No. 112, St. No. 13, Salwa Industrial

Area, P.O. Box 4024, Doha, State of Qatar

Contact Name Andrew J. Slate, General Manager/Laboratory Manager Mr. Allan M. Nabong, QA/QC Head Mr. Jeffrey Lavina, Head of Chemical Laboratory

Telephone +974 44607034/44607036 Fax: +974 44607628

Effective Date of Scope March 2, 2020 Accreditation Standard ISO/IEC 17025: 2017

SN PWA Test No.

Category

Standard No. /

Method/ Issue Date

Title of Standard / Method Used and its

relevant section

Location / Facility

Names of Approved Operators/ Technicians

1. 5.99 Admixture ASTM D891 Standard Test Method for Specific Gravity, apparent of Liquid industrial Chemicals Specific Gravity, Apparent by means of a pycnometer Method B

Street No. 2 Wet Chemistry

1. Nikhil P. Max 2. Jordan Rotea 3. Annabel Ibisate

http://www.ilac.org/



mailto:[email protected]



TL-373 Page 2 of 164 Gulf Laboratories Co. W.L.L.

SN PWA Test No.

Category

Standard No. /

Method/ Issue Date


relevant section

Location / Facility


2. 5.99 Admixture BS EN 480- 12:2005

Admixture for concrete, mortar, and grout Determination of the alkali content of Admixture


1. Nikhil P. Max Jordan 2. Rotea Annabel Ibisate

3. 2.99 Aggregates AASHTO T2 Sampling of Aggregates

Street No. 13 Soil Lab

1. Bhim Bahadur 2. Prashant Kuryakose 3. Sanoj 4. Aju Abraham 5. John Jestin Jose

4. 2.99 Aggregates AASHTO T11-05-2013

Material Finer than 0.075mm (No.200) Sieve in Mineral Aggregates - Washing with plain paper (Procedure A)


1. Aju AbrahamJohn 2. Jestin Jose 3. Ricardo Ranches 4. Richard Dennis 5. Shabeel K V 6. Jestin Jose 7. Mark Kenneth Camama

5. 2.99 Aggregates AASHTO T27-2014

Sieve Analysis of Fines and Coarse Aggregates


1. Aju Abraham 2. John Jestin Jose


SN PWA Test No.

Category

Standard No. /

Method/ Issue Date


relevant section

Location / Facility


6. 2.99 Aggregates AASHTO T- 96-2010

Resistance to Degradation of small size agg.by Abrasion and Impact in the Los Angeles machine


1. Aju Abraham 2. John Jestin Jose 3. Jestin Jose 4. Richard Dennis 5. Shabeek K V 6. Sotero Delacruz

7. 2.99 Aggregates AASHTO T- 104-2011

Soundness of Aggregate by Use of Sodium Sulphate or Magnesium sulphate



8. 2.09 Aggregates ASTM C40/C40M

Standard Test Method for Organic Impurities in FineAggregates for Concrete


1. Kristofferson Cajano 2. Nikhil P-Max 3. Jordan Rotea 4. Annabel Ibisate 5. Catherine Felonia 6. Lorenzo Bucasas

9. 2.13 Aggregates ASTM C88 Standard Test Method for Soundness of Aggregates by the use Sodium Sulfate or Magnesium Sulfate


1. Aju Abraham 2. John Jestin Jose 3. Marlon Pandaan 4. Richard Dennis Asis 5. Chanaka Sameera 6. Manoj Gharti 7. Ricardo Patam 8. Satheesh Babu


SN PWA Test No.

Category

Standard No. /

Method/ Issue Date


relevant section

Location / Facility


10. 2.04 Aggregates ASTM C117 Material finer than 0.075mm (No. 200) Sieve in Mineral Aggregates Procedure A


1. Aju Abraham 2. John Jestin Jose 3. Renjie Thomas 4. Varghese


Standard Test Method for Lightweight Particles in Aggregate



12. 2.06 Aggregates ASTM C127 Standard Test Method for Density, Relative density, (Specific Gravity) and Absorption of Coarse Aggregates



13. 2.05 Aggregates ASTM C128 Standard Test Method for Relative Density (Specific Gravity) and Absorption of Fine Aggregate


1. Aju Abraham 2. John Jestin Jose 3. Thomas Renjie 4. Varghese


SN PWA Test No.

Category

Standard No. /

Method/ Issue Date


relevant section

Location / Facility



Standard Test Method for Resistance to Degradation of Small Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine


1. Aju Abraham 2. John Jestin Jose 3. Rishi Ram 4. Marlon Pandaan 5. Richard Dennis Asis

15. 2.03 Aggregates ASTM C136 Standard Test Method for Sieve Analysis of Fine and Coarse Aggregates



16. 2.30 Aggregates ASTM C136:2014

Sieve Analysis of Fine and Coarse Aggregates


1. Aju Abraham 2. John Jestin Jose 3. Ricardo Patam 4. Dennis Asis 5. Marlon Pandaan

17. 2.07 Aggregates ASTM C142- C142M

Standard Test Method for Clay Lumps and Friable Particles in Aggregates




SN PWA Test No.

Category

Standard No. /

Method/ Issue Date


relevant section

Location / Facility


18. 2.99 Aggregates ASTM C289 Potential Alkali Silica reactivity of Aggregates-Chemical Method



19. 2.99 Aggregates ASTM C430 Fineness of Hydraulic Cement by the 45 micron Sieve


1. Kristofferson Cajano 2, Jordan Rotea 3. Nikhil Max 4. Annabel Ibisate

20. 2.99 Aggregates ASTM C430-08 (2015)

Fineness of Hydraulic Cement by the 45 micron Sieve


1. Kristofferson Cajano 2. Jordan Rotea 3. Nikhil Max 4. Annabel Ibisate

21. 2.12 Aggregates ASTM C535 Standard Test Method for Resistance to Degradation of Large Sized Coarse Aggregate by Abrasion and Impact in Los Angeles Machine


1. Aju Abraham 2. John Jestin Jose 3. Marlon Pandaan 4. Richard Dennis Asis

22. 2.01 Aggregates ASTM D75/D75M

Standard Practice for Sampling Aggregates


1. Aju John 2. Justin Jose


SN PWA Test No.

Category

Standard No. /

Method/ Issue Date


relevant section

Location / Facility


23. 2.10 Aggregates ASTM D4791 Standard Test Method for Flat Particles, elongated particles, or flat and elongated particles in coarse aggregate


1. Aju Abraham 2. John Jestin Jose 3. Rishi Ram 4. Marlon Pandaan

24. 6.34 Aggregates ASTM D5444 Standard Test Method for Mechanical Size Analysis of Extracted Aggregate

Street No. 13 Asphalt Lab

1. Annaliza Caballero 2. Sasanka Dilum 3. Gangaran bhattarai 4. Manoj gharti 5. Ruwan Dewayalage 6. Jeffrey Cruz

25. 2.14 Aggregates ASTM D5821 Standard Test Method for Determining the Percentage of Fractured Particles in Coarse Aggregate


1. Aju John 2. Justin Jose 3. Rishi Ram 4. Marlon Pandaan 5. Richard Dennis Asis

26. 2.20 Aggregates BS 812-2:1995

Testing Aggregates: Methods of determination of density. Cl. 5.3 Method for aggregates all larger than 10 mm


1. Aju Abraham John 2. Jestin Jose 3. Bhim Bahadur 4. Manoj Gharti 5. Marlon Pandaan 6. Richard Dennis Asis


SN PWA Test No.

Category

Standard No. /

Method/ Issue Date


relevant section

Location / Facility


27. 2.21 Aggregates BS 812-2:1995

Testing Aggregates: Methods of determination of density. Cl. 5.4 Method for aggregates between 40 mm and 5 mm


1. Aju Abraham John 2. Jestin Jose 3. Bhim Bahadur 4. Manoj Gharti 5. Marlon Pandaan 6. Richard Dennis Asis 7. Ricardo Patam

28. 2.22 Aggregates BS 812-2:1995

Testing Aggregates: Methods of determination of density. Cl. 5.5 Method for aggregates 10 mm nominal size and smaller



29. 2.17 Aggregates BS 812-102:1989

Testing Aggregates: Methods for sampling


1. Aju Abraham John 2. Jestin Jose 3. Aju John 4. Ricardo Patam 5. Marlon Pandaan 6. Jeffrey Cruz

30. 2.24 Aggregates BS 812-103.1:1985

Testing aggregates-Method for determination of particle size distribution-Sieve tests


1. Aju Abraham John 2. Jestin Jose 3. Marlon Pandaan 4. Richard Dennis Asis

31. 2.24 Aggregates BS 812-103.1:1985

Testing aggregates. Cl. 7.2 Method for




SN PWA Test No.

Category

Standard No. /

Method/ Issue Date


relevant section

Location / Facility


determination of particle size distribution. Sieve tests (Wet)

3. Marlon Pandaan 4. Richard Dennis Asis

32. 2.25 Aggregates BS 812-103.1:1985

Testing aggregates. Cl. 7.3 Method for determination of particle size distribution. Sieve tests (Dry)



33. 2.30 Aggregates BS 812-105.1:1989

Testing Aggregates: Methods for the determination of Particle Shape-Flakiness Index



34. 2.31 Aggregates BS 812-105.2:1990

Testing Aggregates: Methods for the determination of Particle Shape-Elongation Index of coarse aggregate



35. 2.18 Aggregates BS 812-109:1990

Testing Aggregates: Methods for the determination of moisture content. Cl. 6 Definitive, oven- drying method


1. Aju Abraham John 2. Jestin Jose


SN PWA Test No.

Category

Standard No. /

Method/ Issue Date


relevant section

Location / Facility


36. 2.33 Aggregates BS 812-110:1990

Testing Aggregates: Methods for the determination of aggregate crushing value



37. 2.34 Aggregates BS 812-111:1990

Testing Aggregates: Methods for the determination of ten percent fines value (TFV)



38. 2.35 Aggregates BS 812-Part 112-90

Aggregates Testing Method for Determination of Aggregates Impact Value, Dry Procedure



39. 2.37 Aggregates BS 812 Part 117: 1988

Testing Aggregates: Methods for the determination of water soluble chloride salts


1. Kristofferson Cajano 2. Nikhil P. Max 3. Jordan Rotea

40. 2.38 Aggregates BS 812 Part 117:1988

Testing Aggregates: Methods for the determination of water soluble chloride. Appendix C Test Method for determination of




SN PWA Test No.

Category

Standard No. /

Method/ Issue Date


relevant section

Location / Facility


chloride content of aggregates using a nitric acid extract, for aggregate containing chloride not extracted by water


Testing Aggregates: Methods for the determination of sulphate content. Cl. 5.2 Determination of water soluble sulphates




Testing Aggregates: Methods for the determination of sulphate content. Cl. 6 Determination of Acid soluble sulphates


1. Kristofferson Cajano 2. Nikhil P. Max 3. Jordan Rotea 4. Catherine Felonia


Testing Aggregates: Methods for the determination of sulphate content Cl. 6 Determination of the total sulphate content by acid extraction


1. Kristofferson Cajano 2. Jordan Rotea 3. Nikhil Max 4. Catherine Felonia


SN PWA Test No.

Category

Standard No. /

Method/ Issue Date


relevant section

Location / Facility


44. 2.99 Aggregates BS EN 932-1:1997

Test for General Properties of Aggregates - Part 1. Methods for sampling


1. Ricardo Patam 2. Justin Jose 3. Aju Abraham John

45. 2.23 Aggregates BS EN -933-Part 1-2012

Test for Geometrical Properties of Aggregates, Determination of Particle size distribution


1. Aju Abraham John 2. Jestin Jose Renjie 3. Marlon Pandaan 4. Richard Dennis Asis

46. 2.29 Aggregates BS EN -933-Part 3-2012

Test for Geometrical Properties of Aggregates, Determination of Flakiness Index of Aggregates



47. 2.31 Aggregates BS EN 933-4:2008

Tests for geometrical properties of aggregates- Determination of particle shape-Shape index



48. 2.28 Aggregates BS EN 933-7-1998

Tests for geometrical properties of aggregates-Determination of shell content-




SN PWA Test No.

Category

Standard No. /

Method/ Issue Date


relevant section

Location / Facility


Percentage of shells in coarse aggregates

49. 2.99 Aggregates BS EN 933- 9:2009+A1:2013

Tests for geometrical properties of aggregates Part 9 Assessment of fines- Methylene Blue Test


1. Kristofferson Cajano 2. Nikhil P-Max 3. Jordan Rotea 4. Catherine Felonia 5. Lorenzo Bucasas

50. 2.99 Aggregates BS EN 1097-6-2013

Test for Mechanical and Physical Properties of Aggregates, Determination of Particle Density and Water Absorption



51. 2.40 Aggregates BS EN 1744-1:2001-A1:2012

Tests for chemical properties of aggregates-Chemical analysis- Cl. 12 Determination of acid soluble sulfates



52. 2.36 Aggregates BS EN 1744-5:2006

Tests for chemical properties of aggregates-Determination of acid soluble chloride salts




SN PWA Test No.

Category

Standard No. /

Method/ Issue Date


relevant section

Location / Facility


53. 2.99 Aggregates BS EN ISO 11127-7:2011

Preparation of steel substrates before application of paints and related products- Test Methods for non-metallic blast-cleaning abrasives- Determination of water-soluble chlorides


1. Kristofferson Cajano 2. Jordan Rotea 3. Nikhil Max 4. Annabel Ibisate 5. Lorenzo Bucasas

54. 6.46 Asphalt AASHTO Designation T 283-14

Resistance of Compacted Asphalt Mixtures to Moisture-Induced Damage


1. Annaliza Caballero 2. Sasanka Dilum 3. Kasun Chulaka

55. 2.99 Asphalt ASTM D546 Standard Test Method for Sieve Analysis of Mineral Filler for Bituminous Paving Mixtures (ASTM D546-10)


1. Annaliza Caballero 2. Manoj Gharti 3. Sasanka Dilum 4. Akilan Thiraviyalingam

56. 6.22 Asphalt ASTM D979/D979M

Standard Practice for Sampling Bituminous Paving Mixtures


1. Manoj Gharti 2. Annaliza Caballero 3. Akilan Thiraviyalingam 4. Sheldon Marquez 5. Mohammed Ibrahim 6. Joemarie Grandecela 7. Supun Indhushan


SN PWA Test No.

Category

Standard No. /

Method/ Issue Date


relevant section

Location / Facility


57. 6.26 Asphalt ASTM D1188 Bulk Specific Gravity and density of Compacted Bituminous Mixtures using Coated samples.


1. Chulaka Kasun 2. Annaliza Caballero 3. Sasanka Dilum


Standards Test Method for Theoretical Maximum Specific Gravity and Density of Bituminous Paving Mixture. Procedure 9.5.1 (Weighing in water)




Quantitative Extraction of Bitumen from Bituminous Paving Mixtures Ashing Method Clause 11.6.1




Standard Test Method for Bulk Specific Gravity and Density of Non Absorptive Compacted Bituminous Mixtures




SN PWA Test No.

Category

Standard No. /

Method/ Issue Date


relevant section

Location / Facility



Standard Test Method for Density of Bituminous Concrete in Place by Nuclear Methods


1. Edwin Galang 2. Ansar Babu 3. Jojo Moreno 4. Roberto Malanum 5. Francis Ramada 6. Edwin Galang 7. Roberto Malanum

62. Asphalt ASTM D3203 Standard Test Method for Percent Air Voids in Compacted Asphalt Mixtures


1. Sasanka Dilum 2. Akilan 3. Joe Marie


Standard Test Method for Thickness or Height of Compacted Bituminous Paving Mixture Specimens




Standard Practice for Sampling Compacted Bituminous Mixtures for Laboratory Testing


1. Annaliza Caballero 2. Manoj Gharti

65. 6.24 Asphalt ASTM D6926 Preparation of Bituminous Specimens using Marshall apparatus




SN PWA Test No.

Category

Standard No. /

Method/ Issue Date


relevant section

Location / Facility


66. 6.30 Asphalt ASTM D6927 Standard Test For Marshall Stability and Flow of Bituminous Materials



67. 6.4 Asphalt ASTM D6931-17

Standard Methodnfor Indirect (IDT) Strength of Asphalt mixures

Asphalt 1. Annaliza Caballero 2. Sasanka Dilum 3. Kasun Chulaka

68. 2.99 Asphalt BS 598-104:2005

Sampling and examination of bituminous mixtures for road and other areas: Methods of test for determination of density and compaction Cl. 4 Measurement of Density of Cores


1. Manoj Gharti 2. Annaliza Caballero 3. Sasanka Dilum 4. Akilan Thiraviyalingam

69. 6.50 Asphalt BS EN 12697-Part 1:2012

Bituminous mixtures. Test Methods for Hot Mix Asphalt. Soluble binder content. Centrifuge extraction method


1. Manoj Gharti 2. Annaliza Caballero 3. Sasanka Dilum 4. Ruwan Dewayalage


SN PWA Test No.

Category

Standard No. /

Method/ Issue Date


relevant section

Location / Facility



Bituminous Mixtures Test Method for Hot Mix Asphalt, Determination of Particle size Distribution



71. 6.52 Asphalt BS EN 12697-5:2009

Bituminous mixtures-Test Methods for Hot Mix Asphalt- Determination of the maximum density



72. 6.53 Asphalt BS EN 12697-6:2012

Bituminous mixtures-Test Methods for Hot Mix Asphalt- Determination of bulk density of bituminous specimens



73. 6.54 Asphalt BS EN 12697-8:2003

Bituminous mixtures-Test Methods for Hot Mix Asphalt- Determination of void characteristics of bituminous specimens




SN PWA Test No.

Category

Standard No. /

Method/ Issue Date


relevant section

Location / Facility


74. 6.55 Asphalt BS EN 12697-9:2002

Bituminous mixtures-Test Methods for Hot Mix Asphalt- Determination of the reference density



75. 6.56 Asphalt BS EN 12697-13:2000

Bituminous mixtures-Test Methods for Hot Mix Asphalt- Temperature measurement


1. Manoj Gharti 2. Sasanka Dilum 3. Jeffrey Cruz 4. Richard Camacho 5. Romarico Munsayac 6. Jeffrey Delosantos 7. Victor Reyes

76. 6.99 Asphalt BS EN 12697- 26:2012

Bituminous mixtures-Test Methods for Hot Mix Asphalt- Stiffness



77. 6.47 Asphalt BS EN 12697-27:2001

Bituminous mixtures-Test Methods for Hot Mix Asphalt- Sampling



78. 6.48 Asphalt BS EN 12697-28:2001

Bituminous mixtures-Test Methods for Hot Mix Asphalt- Preparation of samples for determining binder




SN PWA Test No.

Category

Standard No. /

Method/ Issue Date


relevant section

Location / Facility


content, water content and grading

79. 6.57 Asphalt BS EN 12697-29:2002

Bituminous mixtures- Test Methods for Hot Mix Asphalt- Determination of the dimensions of a bituminous specimen




Bituminous Mixtures Test Method for Hot Mix Asphalt, Specimen preparation by Impact Compactor




Bituminous Mixtures Test Method for Hot Mix Asphalt, Marshall Test



82. 6.59 Asphalt BS EN 12697-35:2004

Bituminous mixtures-Test Methods for Hot Mix Asphalt- Laboratory mixing




SN PWA Test No.

Category

Standard No. /

Method/ Issue Date


relevant section

Location / Facility



Bituminous Mixtures Test Method for Hot Mix Asphalt, Determination of thickness of a Bituminous Pavement



84. 6.61 Asphalt BS EN 12697-39:2012

Bituminous mixtures- Test Methods for Hot Mix Asphalt- Binder content by ignition



85. 6.05 Asphalt Binder

ASTM D5/D5M-13

Standard Test Method for Penetration of Bituminous Materials


1. Kasun Chulaka 2. Sasanka Dilum


ASTM D6/D6M-95 (Reapproved 2018)

Standard Test Method for Loss on Heating of Oil and Asphaltic Compounds


1. Annaliza Caballero 2. Sasanka Dilum 3. Kasun Chulaka


ASTM D36/D36M-14

Standard Test Method for Softening Point of Bitumen (Ring-and-Ball Apparatus)




SN PWA Test No.

Category

Standard No. /

Method/ Issue Date


relevant section

Location / Facility



ASTM D92-16b

Standard Test Method for Flash and Fire Points by Cleveland Open Cup Tester




ASTM D113-17

Standard Test Method for Ductility of Asphalt Materials




ASTM D140/D140M-16

Standard Practice for Sampling of Asphalt Materials


1. Sasanka Dilum 2. Chulaka Kasun


ASTM D2042-15

Standard Test Method for Solubility of Asphalt Materials by Trichloroethylene



92. 1.31 CBGM BS EN 1924-2-1990

Stabilized Materials for Engineering Purposes Cl 1.3.3 Determination of Moisture Content (Oven Drying Method)


1. Jestin Jose 2. Anoop KG


SN PWA Test No.

Category

Standard No. /

Method/ Issue Date


relevant section

Location / Facility


93. 1.31 CBGM BS EN 1924-2-1990

Stabilized materials for civil engineering purposes Part 2. Methods of test for cement-stabilized and lime-stabilized materials. Cl 4.2 Determination of Compressive Strength of Cubic Specimen


1. Girish Kumar

94. 1.31 CBGM BS EN 1924-2-1990

Stabilized materials for civil engineering purposes Part 2. Methods of test for cement-stabilized and lime-stabilized materials. Cl 4.3 Determination of the effect of immersion in water on the compressive strength


1. Girish Kumar

95. 5.99 Cement AASHTO TP64 – 03

Standard Method of Test f or Predicting Chloride Penetration of Hydraulic Cement Concrete by the Rapid Migration Procedure

Street No. 13 Cement Lab

1. Rowena Cierva 2. Franco Berdote 3. Shanjib Kumar 4. Rian Gagasa


SN PWA Test No.

Category

Standard No. /

Method/ Issue Date


relevant section

Location / Facility


96. Cement ASTM C 109 Standards test Methods for Compressive Strength of Hydraulic Cement Mortars

Street No. 13 Concrete Lab

1. Grish Kumar

97. 5.99 Cement ASTM C114 Standard Test Methods for Chemical Analysis of Hydraulic Cements Cl. 7 - Insoluable Residue


1. Annabelle Ibisate 2. Kristofferson Cajano 3. Nikhil P-Max 4. Jordan Rotea

98. 5.99 Cement ASTM C114 Chemical Analysis of Hydraulic Cements Silicon Dioxide-Reference Test Method Cl.8



99. 5.99 Cement ASTM C114 Standard Test Methods for Chemical Analysis of Hydraulic Cements Cl. 10 Fe2O3



100. 5.99 Cement ASTM C114 Standard Test Methods for Chemical Analysis of Hydraulic Cements Cl. 14 - Al2O3




SN PWA Test No.

Category

Standard No. /

Method/ Issue Date


relevant section

Location / Facility


101. 5.99 Cement ASTM C114 Standard Test Methods for Chemical Analysis of Hydraulic Cements; Cl. 18 - Loss on Ignition


1. Kristofferson Cajano 2. Nikhil P-Max 2. Jordan Rotea 4. Annabelle Ibasate

102. 5.99 Cement ASTM C114-15

Standard Test Methods for Chemical Analysis of Hydraulic Cements; Cl. 23 - CaO (Alternative Method)


1. Kristofferson Cajano 2. Nikhil P-Max 2. Jordan Rotea 4. Annabelle Ibasate

103. 5.02 Cement ASTM C183 Sampling and the amount of Testing of Hydraulic Cement



104. 5.17 Cement ASTM C187 Standard Test Method for Amount of Water Required for Normal Consistency of Hydraulic Cement Paste




SN PWA Test No.

Category

Standard No. /

Method/ Issue Date


relevant section

Location / Facility


105. 5.16 Cement ASTM C191 Standard Test Method for Time Setting of Hydraulic Cement by Vicat Needle



106. 3.99 Cement ASTM C349 Standard Test Method for Compressive Strength of Hydraulic Cement Mortars: Using Portions of Prisms Broken in Flexure



107. 5.22 Cement ASTM C989/C989M

Standard Specification for Slag Cement for use in Concrete and Mortars



108. 5.23 Cement ASTM C1240 Silica Fume Used in Cementitious Mixtures



109. 5.99 Cement BS 5075 Part 1:1982

Concrete Admixtures: Specifications for accelerating


(N/A)


SN PWA Test No.

Category

Standard No. /

Method/ Issue Date


relevant section

Location / Facility


admixtures, regarding admixtures and water

Specification only

110. 5.30 Cement BS EN 196-1:2005

Methods of testing cement-Determination of strength



111. 5.99 Cement BS EN 196-2:2013

Method of testing cement-Chemical analysis of cement- Cl. 4.1.5 Preparation of Test Sample of Cement (BS EN 196-2:2005 Cl. 6)

Street No. 02 Chemical Lab

1. Nikhil P. Max 2. Annabel Ibisate

112. 5.09 Cement BS EN 196-2:2013

Method of testing cement. Chemical analysis of cement Cl. 4.4.1 Determination of Loss on ignition (BS EN 196- 2:2005 Cl. 7)


1. Kristofferson Cajano 2. Nikhil P. Max 3. Jordan Rotea 4. Annabel Ibisate

113. 5.99 Cement BS EN 196-2:2013

Method of testing cement. Chemical analysis of cement. Cl. 4.4.2 Determination of Sulphate (BS EN 196-2:2005 Cl. 8)




SN PWA Test No.

Category

Standard No. /

Method/ Issue Date


relevant section

Location / Facility


114. 5.99 Cement BS EN 196-2:2013

Method of testing cement. Chemical analysis of cement. Cl. 4.4.3 Determination of residue in insoluble in hydrochloric acid and sodium carbonate (BS EN 196-2:2005 Cl. 9)



115. 5.99 Cement BS EN 196-2:2013

Method of testing cement. Chemical analysis of cement.Cl. 4.4.5 Decomposition (BS EN 196-2:2005 Cl. 13.5)



116. 5.10 Cement BS EN 196-2:2013

Method of testing cement- Chemical analysis of cement- Cl. 4.5.2 Decomposition with sodium peroxide (BS EN 196-2:2005 Cl. 13.2)



117. 5.11 Cement BS EN 196-2:2013

Method of testing cement. Chemical analysis of cement. Cl. 4.5.6




SN PWA Test No.

Category

Standard No. /

Method/ Issue Date


relevant section

Location / Facility


Determination of Pure silica (BS EN 196-2:2005 Cl. 13.6)

118. 5.99 Cement BS EN 196-2:2013

Method of testing cement- Chemical analysis of cement- Cl. 4.5.8 Determination of soluble silica (BS EN 196- 2:2005 Cl. 13.8)



119. 5.12 Cement BS EN 196-2:2013

Method of testing cement- Chemical analysis of cement- Cl. 4.5.9 Determination of total silica (BS EN 196- 2:2005 Cl. 13.9)



120. 5.08 Cement BS EN 196-2:2013

Method of testing cement. Chemical analysis of cement. Cl. 4.5.10 Determination of Iron oxide (BS EN 196- 2:2005 Cl. 13.10)




SN PWA Test No.

Category

Standard No. /

Method/ Issue Date


relevant section

Location / Facility


121. 5.07 Cement BS EN 196-2:2013

Method of testing cement. Chemical analysis of cement. Cl. 4.5.11 Determination of Aluminium Oxide Al2O3 (BS EN 196-2:2005 Cl.13.11)



122. 5.06 Cement BS EN 196-2:2013

Method of testing cement- Chemical analysis of cement- Cl. 4.5.13 Determination of magnesium oxide by DCTA-reference method (BS EN 196-2:2005 Cl. 13.13)



123. 5.05 Cement BS EN 196-2-2013

Method of testing cement. Chemical analysis of cement Cl. 4.5.14 Determination of Calcium by EDTA (BS EN 196-2:2005 Cl. 13.14)



124. 5.06 Cement BS EN 196-2-2013

Method of testing cement. Chemical analysis of cement. Cl. 4.5.15




SN PWA Test No.

Category

Standard No. /

Method/ Issue Date


relevant section

Location / Facility


Determnation of magnesium by EDTA metod (BS EN 196-2:2005 Cl. 13.15)

125. 5.99 Cement BS EN 196-2:2013

Method of testing cement. Chemical analysis of cement. Cl. 4.5.16 Chloride in cement (BS EN 196-2:2005 Cl. 14)



126. 5.13 Cement BS EN 196-2-2013

Method of testing cement. Chemical analysis of cement. Cl. 4.15.19 Determination of alkali-reference method (BS EN 196-2:2005 Cl. 17)



127. 5.14 Cement BS EN 196-3:2005+A1:2008

Methods of testing cement-Determination of setting times and soundness



128. 5.21 Cement BS EN 196-6-2010

Methods of testing cement-Determination of fineness




SN PWA Test No.

Category

Standard No. /

Method/ Issue Date


relevant section

Location / Facility


129. 5.10 Cement BS EN 196-7-2007

Methods of testing cement-Methods of taking and preparing samples of cement



130. 5.19 Cement BS EN 196-21:1992

Methods of testing cement- Determination of the chloride, carbon dioxide and alkali content of cement Cl. 4 Determination of the chloride content



131. 5.99 Cement BS EN 196- 21:1992

Methods of testing cement- Determination of the chloride, carbon dioxide and alkali content of cement Cl. 8 Determination of the alkali content (Alternative Method)



132. 3.32 Cement NT Build 492 Concrete, Mortar And Cement-Based Repair Materials: Chloride Migration Coefficient From Non-Steady-State Migration Experiments




SN PWA Test No.

Category

Standard No. /

Method/ Issue Date


relevant section

Location / Facility


133. 5.99 Concrete AASHTO T260-97

Sampling and Testing for Chloride Ion in Concrete and Concrete Raw Materials. Potentiometric Titration Cl.5.4.1 - Method 1:



134. 3.01 Concrete ASTM C31/C31M:15ae1

Standard Practice for Making and Curing Test Specimens in the Field


1. Nilam Khadka 2. Liyakath Ali 3. Sanoordin 4. Rommel Manalo

135. 3.05 Concrete ASTM C39/C39M-16

Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens


1. Rajeev Matthew 2. Bineesh 3. Girish Kumar 4. Rommel Manalo


Standard Test Method for Obtaining and Testing Drilled Cores and Sawed Beams of Concrete


1. Rajeev Matthew 2. Bineesh 3. Girish Kumar 4. Gerardo Arellano


SN PWA Test No.

Category

Standard No. /

Method/ Issue Date


relevant section

Location / Facility


137. 3.14 Concrete ASTM C138/C138M:2016

Standard Test Method for Density (Unit Weight), Yield, and Air cotent (Gravimetric) of Concrete


1. Bhim Bahadur 2. Rommel Manalo 3. Rajeev Matthew 4. Nilam Khadka 5. Justin Josh 6. Bineesh Babu

138. 3.04 Concrete ASTM C143/C143M-15a

Standard Test Method for Slump of Hydraulic Cement Concrete


1. Nilam Khadka 2. Sanoordin 3. Rommel Manalo 4. Prashant Sajahan

139. 3.02 Concrete ASTM C172/C172M:2014

Sampling Freshly Mixed Concrete


1. Bhim Bahadur 2. Rommel Manalo 3. Rajeev Matthew 4. John Borja 5. Rico Munsayac


Standard Test Method for Air Content of Freshly Mixed Concrete by the Pressure Method


1. Nilam Khadka 2. Rommel Manalo 3. Prashant Sajahan 4. Jestin Jose


SN PWA Test No.

Category

Standard No. /

Method/ Issue Date


relevant section

Location / Facility



Standard Test Method for Bleeding of Concrete


1. Bhim Bahadur 2. Prashant Sajhan 3. Sanoordine Mohamad 4. Nilam Khadka 5. Kuryakose Kurian


Standard Practice for Capping Cylindrical Concrete Specimens


1. Rajeev Matthew 2. Bineesh 3. Girish Kumar 4. Gerardo Arellano 5. Prashant Sajahan


Standard Test Method for Temperature of Freshly Mixed Hydraulic Cement Concrete


1. Nilam Khadka 2. Sanoordin 3. Rommel Manalo 4. Prashant Sajahan 5. Bineesh Babu

144. 3.10 Concrete ASTM C1152/C1152M

Standard Test Method for Acid Soluble Chloride in Mortar and Concrete


1. Kristofferson Cajano 2. Jordan Rotea 3. Nikhil Max 4. Catherine Felonia

145. 3.11 Concrete ASTM C1202-12

Standard Test Method for Electrical Indication of Concrete to Resist Chloride Ion Penetration


1. Rowena Cierva 2. Franco Berdote 3. Shajib Kumar 4. Rian Gagasa


SN PWA Test No.

Category

Standard No. /

Method/ Issue Date


relevant section

Location / Facility


146. 3.90 Concrete ASTM C1218/C 1218M

Water Soluble Chloride in Mortar and Concrete


1. Kristofferson Cajano 2. Jordan Rotea 3. Nikhil Max 4. Annabel Ibisate 5. Catherine Felonia


Standard Practice for Sampling Materials for Shotcrete


1. Sheldon Lyle Marquez 2. Justin Jose 3. Aju Abraham 4. Ricardo Patam

148. 3.19 Concrete ASTM C1611/ C1611M - 14

Standard Test Method for Slump Flow of Consolidating concrete


1. Jestin Jose 2. Prasanth Sahajan 3. Ricardo Patam

149. 3.30 Concrete BS-1881-Part 122-2011

Testing Hardened Concrete Method for Determination of water Absorption



150. 3.33 Concrete BS 1881 Part 124:2015

Testing Concrete: Method for the analysis of hardened concrete. Cl. 10.2 Determination of chloride content.


1. Kristofferson Cajano 2. Nikhil P. Max 3. Jordan Rotea 4. Annabel Ibisate 5. Catherine Felonia


SN PWA Test No.

Category

Standard No. /

Method/ Issue Date


relevant section

Location / Facility


151. 3.34 Concrete BS 1881 Part 124:2015

Testing Concrete: Method for the analysis of hardened concrete. Cl. 10.3 Determination of Sulphate content



152. 10.05 Concrete BS 1881-204:1988

Testing concrete. Recommendations on the use of electromagnetic cover meters


1. Ricardo Patam 2. Prashant

153. 3.31 Concrete BS 1881-208:1996

Testing Concrete: Recommendations for the determination of the initial surface absorption of concrete


1. Rowena Cierva 2. Shanjib Kumar 3. Franco Berdote 4. Nilam Khadka

154. 3.21 Concrete BS EN 12350-1:2009

Testing fresh concrete-Sampling


1. Nilam Khadka 2. Rommel Manalo 3. Prashant Sajahan 4. Marlon Pandaan

155. 3.23 Concrete BS EN 12350-2:2009

Testing fresh concrete. Slump-test


1. Nilam Khadka 2. Rommel Manalo 3. Prashant Sajahan 4. Girish Kumar


SN PWA Test No.

Category

Standard No. /

Method/ Issue Date


relevant section

Location / Facility


156. 3.24 Concrete BS EN -12350-5:2009

Testing fresh concrete - Part 5: Flow table test


1. Jestin Jose 2. Prashant Sajahan 3. Sheldon Lyle Marquez

157. 3.25 Concrete BS EN-12390-1-2009

Testing of hardened Concrete Shape, Dimension and other requirement for Specimens and molds


1. Rajeev Mathew 2. Girish Kumar 3. Bineesh Babu 4. Gerardo Arellano 5. Prashant Sajahan

158. 3.22 Concrete BS EN 12390-2:2009

Testing hardened concrete. Making and curing specimens for strength tests


1. Rajeev Matthew 2. Liyakath Ali 3. Girish Kumar 4. Bineesh Babu 5. Gerardo Arellano 6. Prashant Sajahan

159. 3.26 Concrete BSEN-12390-3-2009

Testing of hardened Concrete Compressive Strength test of Concrete Specimen


1. Rajeev Mathew 2. Girish Kumar

160. 3.27 Concrete BS EN-12390-7-2009

Testing of hardened Concrete Density test of Concrete Specimen


1. Rajeev Mathew 2. Girish Kumar 3. Bineesh Babu 4. Gerardo Arellano 5. Prashant Sajahan


SN PWA Test No.

Category

Standard No. /

Method/ Issue Date


relevant section

Location / Facility


161. 3.29 Concrete BS EN -12390-8-2009

Testing hardened concrete Depth of Penetration of Water under Pressure



162. 3.28 Concrete BS EN 12504-1:2009

Testing concrete in structures-Cored specimens. Taking, examining and testing in compression


1. Rajeev Matthew 2. Bineesh 3. Girish Kumar

163. 3.99 Concrete BS EN 12504-2:2012

Testing Concrete in Structures: Part 2: Non- Destructive testing - Determination of Rebound Number


1. Justin Jose 2. Binoy Thomas

164. 3.99 Concrete BS EN 14488-1

Testing Sprayed Concrete - Part 1: Sampling of Fresh and hardened Concrete


1. Sheldon Lyle Marquez 2. Justin Jose 3. Aju Abraham

165. 3.99 Concrete BS EN 14488-2

Testing Sprayed concrete. Compressive Strength of Young Sprayed Concrete


1. Sheldon Lyle Marquez 2. Ricardo Patam


SN PWA Test No.

Category

Standard No. /

Method/ Issue Date


relevant section

Location / Facility


(Method A and Method B)

166. 3.99 Concrete BS EN 14488-5

Testing Sprayed concrete - Determination of Energy Absorption Capacity of Fibre reinforce concrete Slab Specimen


1. Rajeeb Matthew 2. Sheldon Lyle Marquez 3. Ricardo Patam

167.

Electrical Insulating

Liquids (Transforme

r Oils)

ASTM D92 Standard Test Method for Flash and Fire Points by Cleveland Open Cup Tester

Street No. 2 Oil Lab

1. Frederick Andal 2. Kristofferson Cajano 3. Eldhose Annas

168.


Liquids (Transforme

r Oils)

ASTM D445 Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity)



169.


Liquids (Transforme

r Oils)

ASTM D664 Standard Test Method for Acid Number of Petroleum Products by Potentiometric Titration




SN PWA Test No.

Category

Standard No. /

Method/ Issue Date


relevant section

Location / Facility


170.


Liquids (Transforme

r Oils)

ASTM D923 Standard Practices for Sampling Electrical Insulating Liquids



171.


Liquids (Transforme

r Oils)

ASTM D924 Standard Test Method for Dissipation Factor (or Power Factor) and Relative Permittivity (Dielectric Constant) of Electrical Insulating Liquids



172.


Liquids (Transforme

r Oils)

ASTM D971 Standard Test Method for Interfacial Tension of Oil Against Water by the Ring Method



173.


Liquids (Transforme

r Oils)

ASTM D1275 Standard Test Method for Corrosive Sulfur in Electrical Insulating Oils



174.


Liquids (Transforme

r Oils)

ASTM D1298 Standard Test Method for density, relative density, or API gravity of crude petroleum and liquid petroleum products




SN PWA Test No.

Category

Standard No. /

Method/ Issue Date


relevant section

Location / Facility


by hydrometer method

175.


Liquids (Transforme

r Oils)

ASTM D1500 Standard Test Method for ASTM Color of Petroleum Products (ASTM Color Scale)



176.


Liquids (Transforme

r Oils)

ASTM D1533 Standard Test Method forWater in Insulating Liquids by Coulometric Karl Fischer Titration



177.


Liquids (Transforme

r Oils)

ASTM D1816 Standard Test Method for Dielectric Breakdown Voltage of Insulating Liquids Using VDE Electrodes



178.


Liquids (Transforme

r Oils)

ASTM D3612 Standard Test Method for Analysis of Gases Dissolved in Electrical Insulating Oil by Gas Chromatography (ASTM D3612 Method C)




SN PWA Test No.

Category

Standard No. /

Method/ Issue Date


relevant section

Location / Facility


179.


Liquids (Transforme

r Oils)

ASTM D5837 Standard Test Method for Furanic Compounds in Electrical Insulating Liquids by High-Performance Liquid Chromatography (HPLC)



180.


Liquids (Transforme

r Oils)

GL-SOP-PL-07 NAS 1638

Particle Count in Oils Street No. 2 Oil Lab


181.


Liquids (Transforme

r Oils)

IEC 60156 Insulating liquids - Determination of the breakdown voltage at power frequency - Test method



182.


Liquids (Transforme

r Oils)

IEC 60247 Insulating liquids - Measurement of relative permittivity, dielectric dissipation factor (tan d) and d.c. resistivity




SN PWA Test No.

Category

Standard No. /

Method/ Issue Date


relevant section

Location / Facility


183.


Liquids (Transforme

r Oils)

IEC 60422 Annex C C.1

Mineral insulating oils in electrical equipment – Supervision and maintenance guidance Test method for determination of sediment



184.


Liquids (Transforme

r Oils)

IEC 60422 Annex Clause C.2 / IEC 61125 Cl 1.9.1

Mineral insulating oils in electrical equipment – Supervision and maintenance guidance Test method for determination of sediment Unused hydrocarbon-based insulating liquids —Test methods for evaluating the oxidation stability - Clause 1.9.1 Sludge formation




SN PWA Test No.

Category

Standard No. /

Method/ Issue Date


relevant section

Location / Facility


185. Electrical Insulating

Liquids (Transforme

r Oils)

IEC 60475 Method of sampling insulating liquids


1. Frederick Andal 2. Kristofferson Cajano

186.


Liquids (Transforme

r Oils)

IEC 60567 Oil-filled electrical equipment - Sampling of gases and analysis of free and dissolved gases - Guidance



187.


Liquids (Transforme

r Oils)

IEC 60814 Insulating liquids —Oil-impregnated paper and pressboard — Determination of water by automatic coulometric Karl Fischer titration



188.


Liquids (Transforme

r Oils)

IEC 60970 Insulating liquids - Methods for counting and sizing particles




SN PWA Test No.

Category

Standard No. /

Method/ Issue Date


relevant section

Location / Facility


189.


Liquids (Transforme

r Oils)

IEC 61198 Mineral insulating oils -Methods for the determination of 2-furfural and related compounds.



190.


Liquids (Transforme

r Oils)

IEC 62021 Insulating liquids - Determination of acidity - Part 1: Automatic potentiometric titration



191.


Liquids (Transforme

r Oils)

IEC 62535 Insulating liquids - Test method for detection of potentially corrosive sulphur in used and unused insulating oil



192. Electrical Insulating

Liquids (Transforme

r Oils)

IEC 62691 Test methods for the determination of interfacial tension of insulating liquids – Determination with the ring method



193.


Liquids

ISO 2049 Petroleum products -- Determination of colour (ASTM scale)




SN PWA Test No.

Category

Standard No. /

Method/ Issue Date


relevant section

Location / Facility


(Transformer Oils)

194.


Liquids (Transforme

r Oils)

ISO 3104 Petroleum products -- Transparent and opaque liquids -- Determination of kinematic viscosity and calculation of dynamic viscosity



195. 9.99 Environmental Chemistry

- Marine Water and Sediment

MOOPAM Manual of oceanographic observations and pollutant analyses methods (MOOPAM) - 1999 (IV-38): Total Organic Carbon


1. Kristofferson Cajano 2. Nikhil P-Max 3. Jordan Rotea 4. Annabel Ibisate 5. Lorenzo Bucasas

196.

Environmental Chemistry - Sediment,

Soil, and Solid Wastes - Organics

US EPA Method 5035/8260C

US EPA - Methods For Chemical Analysis of Water and Wastes Purge and Trap for Aqueous Sample / Closed System Purge and Trap and Extraction for Volatile Organics in Soil and Waste Sample/

Street No. 2 Environmental-GC Lab

1. Theresa Sayo 2. Sajeev Yohannan 3. Sharib Raza


SN PWA Test No.

Category

Standard No. /

Method/ Issue Date


relevant section

Location / Facility


Volatile Organic Compounds by GC-MS

197.

Environmental Chemistry - Sediment,

Soil, and Solid Wastes - Organics

US EPA Method 8015 C

US EPA - Methods for Chemical Analysis of Water and Wastes Total Petroleum Hydrocarbons (TPH) /Analysis of Semi-volatile organic compounds by GC-MS



198. 9.99 Environmental Chemistry - Sediment,

Soil, and Solid Waste

Organics

US EPA Method 8015C

US EPA - Methods for Chemical Analysis of Water and Wastes Method 8015C Nonhalogenated Organics By Gas Chromatography (GC-MS)





Organics

US EPA Method 8041A / 3546

US EPA - Methods for Chemical Analysis of Water and Wastes Method 8041a Phenols By Gas Chromatography




SN PWA Test No.

Category

Standard No. /

Method/ Issue Date


relevant section

Location / Facility




Organics

US EPA Method 8270D / 3546

US EPA - Methods for Chemical Analysis of Water and Wastes Method 8270D Semivolatile Organic Compounds By Gas Chromatography/Mass Spectrometry (GC/MS)





Organics

US EPA Method 9071B

US EPA - Methods For Chemical Analysis of Water and Wastes Method 9071B n-Hexane Extractable Material (HEM) For Sludge, Sediment, And Solid Samples



202. Environment al Chemistry

- Soil/Wastes

US EPA 1311

Toxicity Characteristic Leaching Procedure

Street No. 2 Environmental - GC Lab

1. Theresa Sayo 2. Sharib Raza 3. Adolf Xavier 4. Srejeesh

203. 9.99 Environmental Chemistry - Water and Wastewater

APHA/AWWA 2110

Standard Methods for the Examination of Water and Wastewater 23rd Edition:2017 Appearance

Street No. 2 Water/Wastewater testing

1. Deepu J Arackal 2. Unnikrishnan 3. Aprilito Basilio


SN PWA Test No.

Category

Standard No. /

Method/ Issue Date


relevant section

Location / Facility



APHA/AWWA 2120 C

Standard Methods for the Examination of Water and Wastewater 23rd Edition:2017 Spectrophotometric-Single Wavelength Method (Proposed) - Color


1. Ommen Varghese 2. Unnikrishnan 3. Deepu J Arackal

205. 9.03 Environmental

Chemistry- Water and

Wastewater

APHA/AWWA 2130 B

Standard Methods for the Examination of Water and Wastewater 23rd Edition:2017 Turbidity, Nephelometric method


1. Oommen Varghese


APHA/AWWA 2310 B

Standard Methods for the Examination of Water and Wastewater 23rd Edition:2017 Titration Method (Acidity)


1. Ommen Varghese 2. Unnikrishnan 3. Deepu J Arackal 4. Mark Magno


APHA/AWWA 2320 B

Standard Methods for the Examination of Water and Wastewater 23rd Edition:2017 Total


1. Oommen Varghese 2. Unnikrishnan T 3. Deepu J Arackal 4. Ullas Unnikrishna Pillai 5. Aprilito Basilio


SN PWA Test No.

Category

Standard No. /

Method/ Issue Date


relevant section

Location / Facility


Alkalinity, Titration method

6. Deepthi Balakrishnan


APHA/AWWA 2320-B

Standard Methods for the Examination of Water and Wastewater 23rd Edition:2017 Alkalinity: Titration Method - Bicarbonate


1. Aprilito Basilio 2. Ommen Varghese 3. Unnikrishnan 4. Deepu J Arackal 5. Ullas Unnikrishna Pillai 6. Deepthi Balakrishnan


APHA/AWWA 2320-B

Standard Methods for the Examination of Water and Wastewater 23rd Edition:2017 Alkalinity: Titration Method - Carbonate


1. Aprilito Basilio 2. Ommen Varghese 3. Unnikrishnan 4. Deepu J Arackal 5. Ullas Unnikrishna Pillai 6. Deepthi Balakrishnan


APHA/AWWA 2340 C

Standard Methods for the Examination of Water and Wastewater 23rd Edition:2017 Total Hardness, EDTA Titrimetric Method


1. Oommen Varghese 2. Unnikrishnan T 3. Deepu J Arackal 4. Ullas Unnikrishna Pillai 5. Aprilito Basilio


SN PWA Test No.

Category

Standard No. /

Method/ Issue Date


relevant section

Location / Facility



APHA/AWWA 2510 B

Standard Methods for the Examination of Water and Wastewater 23rd Edition:2017 Conductivity, Laboratory method


1. Oommen Varghese 2. Unnikrishnan T 3. Deepu J Arackal 4. Ullas Unnikrishna Pillai 5. Aprilito Basilio 6. Deepthi Balakrishnan


APHA/AWWA 2520-B

Standard Methods for the Examination of Water and Wastewater 23rd Edition:2017 Total Suspended Solids (TSS) Dried @ 103°C - 105°C


1. Oommen Varghese 2. Unnikrishnan T 3. Deepu J Arackal


APHA/AWWA 2540 B

Standard Methods for the Examination of Water and Wastewater 23rd Edition:2017. Total Solids Dried at 103 - 105°C




SN PWA Test No.

Category

Standard No. /

Method/ Issue Date


relevant section

Location / Facility



APHA/AWWA 2540 C

Standard Methods for the Examination of Water and Wastewater 23rd Edition:2017. Total Dissolved Solids Dried at 180°C


1, Ommen Varghese 2. Unnikrishnan 3. Deepu J Arackal 4. Aprilito Basilio 5. Ullas Unnikrishna Pillai 6. Deepthi Balakrishnan


APHA/AWWA 2540 C & E

Standard Methods for the Examination of Water and Wastewater 23rd Edition:2017. Total Dissolved Solids Dried at 180°C. Total Volatile Dissolve Solids Ignited at 550°C


1. Ommen Varghese 2. Unnikrishnan 3. Deepu J Arackal 4. Aprilito Basilio


APHA/AWWA 2540 D

Standard Methods for the Examination of Water and Wastewaters 23rd Edition:2017 Total Suspended Solids


1, Deepu J Arackal 2. Ommen Varghese 3. Unnikrishnan 4. Aprilito Basilio


SN PWA Test No.

Category

Standard No. /

Method/ Issue Date


relevant section

Location / Facility



APHA/AWWA 2540 D & E.

Standard Methods for the Examination of Water and Wastewaters 23rd Edition:2017 Total Suspended Solids and Total Volatile Suspended Solids Ignited at 550°C


1. Deepu J Arackal 2. Ommen Varghese 3. Unnikrishnan 4. Aprilito Basilio


APHA/AWWA 2540 E.

Standard Methods for the Examination of Water and Wastewaters 23rd Edition:2017 Fixed and Volatile Solids Ignited at 550°C




APHA/AWWA 2540 F

Standard Methods for the Examination of Water and Wastewater 23rd Edition:2017 Settleable Solids




APHA/AWWA 2540 G

Standard Methods for the Examination of Water and Wastewater 23rd Edition:2017 Total, Fixed, and Volatile




SN PWA Test No.

Category

Standard No. /

Method/ Issue Date


relevant section

Location / Facility


Solids in Solid and Semi-solid samples.


APHA/AWWA 2550 B

Standard Methods for the Examination of Water and Wastewater 23rd Edition:2017 Laboratory and Field Methods (Temperature)




APHA/AWWA 2580

Standard Methods for the Examination of Water and Wastewater 23rd Edition:2017 Oxidation- Reduction Potential Measurement in Clean Water - Oxidation Reduction Potential (ORP)




SN PWA Test No.

Category

Standard No. /

Method/ Issue Date


relevant section

Location / Facility



APHA/AWWA 2710-B

Standard Methods for the Examination of Water and Wastewater 23rd Edition:2017 Test on sludge - settled sludge volume




APHA/AWWA 2710-D

Standard Methods for the Examination of Water and Wastewater 23rd Edition:2017 Sludge - Sludge volume Index (SVI)




APHA/AWWA 3120 B

Standard Methods for the Examination of Water and Wastewaters 23rd Edition:2017 ICP-Atomic Emission Spectroscopy Aluminum Al

Street No. 2 Enviromental-ICP Lab

1. Adolf Xavier 2. Jordan Rotea 3. Srejeesh TS


APHA/AWWA 3120 B

Standard Methods for the Examination of Water and Wastewaters 23rd Edition:2017 ICP-Atomic Emission




SN PWA Test No.

Category

Standard No. /

Method/ Issue Date


relevant section

Location / Facility


Spectroscopy Antimony Sb


APHA/AWWA 3120 B

Standard Methods for the Examination of Water and Wastewaters 23rd Edition:2017 ICP-Atomic Emission Spectroscopy Arsenic As




APHA/AWWA 3120 B

Standard Methods for the Examination of Water and Wastewaters 23rd Edition:2017 ICP-Atomic Emission Spectroscopy Barium Ba




APHA/AWWA 3120 B

Standard Methods for the Examination of Water and Wastewaters 23rd Edition:2017 ICP-Atomic Emission Spectroscopy Berylium Be




SN PWA Test No.

Category

Standard No. /

Method/ Issue Date


relevant section

Location / Facility



APHA/AWWA 3120 B

Standard Methods for the Examination of Water and Wastewaters 23rd Edition:2017 ICP-Atomic Emission Spectroscopy Boron B




APHA/AWWA 3120 B

Standard Methods for the Examination of Water and Wastewaters 23rd Edition:2017 ICP-Atomic Emission Spectroscopy Cadmium Cd




APHA/AWWA 3120 B

Standard Methods for the Examination of Water and Wastewaters 23rd Edition:2017 ICP-Atomic Emission Spectroscopy Calcium Ca




APHA/AWWA 3120 B

Standard Methods for the Examination of Water and Wastewaters 23rd Edition:2017 ICP-




SN PWA Test No.

Category

Standard No. /

Method/ Issue Date


relevant section

Location / Facility


Atomic Emission Spectroscopy Chromium Cr


APHA/AWWA 3120 B

Standard Methods for the Examination of Water and Wastewaters 23rd Edition:2017 ICP-Atomic Emission Spectroscopy Cobalt Co




APHA/AWWA 3120 B

Standard Methods for the Examination of Water and Wastewaters 23rd Edition:2017 ICP-Atomic Emission Spectroscopy Copper Cu




APHA/AWWA 3120 B

Standard Methods for the Examination of Water and Wastewaters 23rd Edition:2017 ICP-Atomic Emission Spectroscopy Iron Fe




APHA/AWWA 3120 B

Standard Methods for the Examination of Water and




SN PWA Test No.

Category

Standard No. /

Method/ Issue Date


relevant section

Location / Facility


- Water and Wastewater

Wastewaters 23rd Edition:2017 ICP-Atomic Emission Spectroscopy Lead Pb


APHA/AWWA 3120 B

Standard Methods for the Examination of Water and Wastewaters 23rd Edition:2017 ICP-Atomic Emission Spectroscopy Lithium Li




APHA/AWWA 3120 B

Standard Methods for the Examination of Water and Wastewaters 23rd Edition:2017 ICP-Atomic Emission Spectroscopy Magnesium Mg




APHA/AWWA 3120 B

Standard Methods for the Examination of Water and Wastewaters 23rd Edition:2017 ICP-Atomic Emission Spectroscopy Manganese Mn




SN PWA Test No.

Category

Standard No. /

Method/ Issue Date


relevant section

Location / Facility



APHA/AWWA 3120 B

Standard Methods for the Examination of Water and Wastewaters 23rd Edition:2017 ICP-Atomic Emission Spectroscopy Mercury Hg




APHA/AWWA 3120 B

Standard Methods for the Examination of Water and Wastewaters 23rd Edition:2017 ICP-Atomic Emission Spectroscopy Molybdenum Mo




APHA/AWWA 3120 B

Standard Methods for the Examination of Water and Wastewaters 23rd Edition:2017 ICP-Atomic Emission Spectroscopy Nickel Ni




APHA/AWWA 3120 B





SN PWA Test No.

Category

Standard No. /

Method/ Issue Date


relevant section

Location / Facility


Atomic Emission Spectroscopy Phosphorus P


APHA/AWWA 3120 B

Standard Methods for the Examination of Water and Wastewaters 23rd Edition:2017 ICP-Atomic Emission Spectroscopy Potassium K




APHA/AWWA 3120 B

Standard Methods for the Examination of Water and Wastewaters 23rd Edition:2017 ICP-Atomic Emission Spectroscopy Selenium Se




APHA/AWWA 3120 B

Standard Methods for the Examination of Water and Wastewaters 23rd Edition:2017 ICP-Atomic Emission Spectroscopy Silicon Si




SN PWA Test No.

Category

Standard No. /

Method/ Issue Date


relevant section

Location / Facility



APHA/AWWA 3120 B

Standard Methods for the Examination of Water and Wastewaters 23rd Edition:2017 ICP-Atomic Emission Spectroscopy Silver Ag




APHA/AWWA 3120 B

Standard Methods for the Examination of Water and Wastewaters 23rd Edition:2017 ICP-Atomic Emission Spectroscopy Sodium Na




APHA/AWWA 3120 B

Standard Methods for the Examination of Water and Wastewaters 23rd Edition:2017 ICP-Atomic Emission Spectroscopy Thallium Tl




SN PWA Test No.

Category

Standard No. /

Method/ Issue Date


relevant section

Location / Facility



APHA/AWWA 3120 B

Standard Methods for the Examination of Water and Wastewaters 23rd Edition:2017 ICP-Atomic Emission Spectroscopy Tin Sn




APHA/AWWA 3120 B

Standard Methods for the Examination of Water and Wastewaters 23rd Edition:2017 ICP-Atomic Emission Spectroscopy Titanium Ti




APHA/AWWA 3120 B

Standard Methods for the Examination of Water and Wastewaters 23rd Edition:2017 ICP-Atomic Emission Spectroscopy Vanadium V




APHA/AWWA 3120 B





SN PWA Test No.

Category

Standard No. /

Method/ Issue Date


relevant section

Location / Facility


Atomic Emission Spectroscopy Zinc Zn


APHA/AWWA 3500 Ca B

Standard Methods for the Examination of Water and Wastewater 23rd Edition:2017 Calcium, EDTA Titrimetric method




APHA/AWWA 3500-Fe B

Standard Methods for the Examination of Water and Wastewaters 23rd Edition:2017. Iron in water by Phenanthroline Colourimetric method




APHA/AWWA 3500 Mg B

Standard Methods for the Examination of Water and Wastewater 23rd Edition:2017 Magnesium, Calculation method




SN PWA Test No.

Category

Standard No. /

Method/ Issue Date


relevant section

Location / Facility



APHA/AWWA 4110-B Chloride

Standard Methods for the Examination of Water and Wastewater 23rd Edition:2017. Anions by Ion Chromatography. Determination of Anions by Ion Chromatography with chemical suppression of eluent conductivity - Chloride


1. Oommen Varghese 2. Unnikrishnan T 3. Sajeev Yohanan


APHA/AWWA 4110-B Nitrate

Standard Methods for the Examination of Water and Wastewater 23rd Edition:2017. Anions by Ion Chromatography. Determination of Anions by Ion Chromatography with chemical suppression of eluent conductivity - Nitrate


1. Oommen Varghese 2. Unnikrishnan 3. Deepu J Arackal 4. Ullas Unnikrishna Pillai 5. Aprilito Basilio


SN PWA Test No.

Category

Standard No. /

Method/ Issue Date


relevant section

Location / Facility



APHA/AWWA 4110-B Nitrite

Standard Methods for the Examination of Water and Wastewater 23rd Edition:2017. Anions by Ion Chromatography. Determination of Anions by Ion Chromatography with chemical suppression of eluent conductivity - Nitrite




APHA/AWWA 4110-B Sulphate

Standard Methods for the Examination of Water and Wastewater 23rd Edition:2017 Anions by Ion Chromatography. Determination of Anions by Ion Chromatography with chemical suppression of eluent conductivity - Sulphate




SN PWA Test No.

Category

Standard No. /

Method/ Issue Date


relevant section

Location / Facility



APHA/AWWA 4110 D

Standard Methods for the Examination of Water and Wastewater 23rd Edition:2017. Ion Chromatographic determination of Oxyhalides and Bromide


1. Unnikrishnan T 2. Sajeev Yohanan


APHA/AWWA 4500-Cl B

Standard Methods for the Examination of Water and 23rd Edition:2017 Iodometric Method I (Chlorine - Residual)




APHA/AWWA4500 Cl- B

Standard Methods for the Examination of Water and Wastewater 23rd Edition:2017 Chloride, Argentometric method




APHA/AWWA 4500-Cl- D

Standard Methods for the Examination of Water and Wastewater 23rd Edition:2017


1. Ommen Varghese 2. Unnikrishnan 3. Deepu J Arackal 4. Jordan Rotea


SN PWA Test No.

Category

Standard No. /

Method/ Issue Date


relevant section

Location / Facility


Potentiometric Method (Chloride)


APHA/AWWA 4500-Cl G

Standard Methods for the Examination of Water and Wastewater 23rd Edition:2017 DPD Colorimetric Method (Chlorine - Residual)


1. Ommen Varghese 2. Unnikrishnan 3. Deepu J Arackal 4. Ullas Unnikrishna Pillai 5. Aprilito Basilio 6. Deepthi Balakrishnan


APHA/AWWA 4500-CN C

Standard Methods for the Examination of Water and Wastewater 23rd Edition:2017 Total Cyanide After Distillation




APHA/AWWA 4500-CN- E

Standard Methods for the Examination of Water and Wastewater 23rd Edition:2017 Colorimetric Method (Cyanide)




SN PWA Test No.

Category

Standard No. /

Method/ Issue Date


relevant section

Location / Facility



APHA/AWWA 4500-CN- F

Standard Methods for the Examination of Water and Wastewater 23rd Edition:2017 Cyanide Selective Electrode Method




APHA/AWWA 4500-CO2 C

Standard Methods for the Examination of Water and Wastewater 23rd Edition:2017 Titrimetric Method for Free Carbon Dioxide (Carbon Dioxide)




APHA/AWWA 4500 F- D

Standard Methods for the Examination of Water and Wastewater 23rd Edition:2017 Fluoride, SPADNS method Test




SN PWA Test No.

Category

Standard No. /

Method/ Issue Date


relevant section

Location / Facility



APHA/AWWA 4500 H+ B

Standard Methods for the Examination of Water and Wastewater 23rd Edition:2017 pH value, Electrometric method




APHA/AWWA 4500-Norg B and 4500 NH3 C

Standard Methods for the Examination of Water and Wastewater 23rd Edition:2017 Macro Kjeldahl Method and Titrimetric Method (N/N Org)


1, Ommen Varghese 2. Unnikrishnan 3. Deepu J Arackal 4. Aprilito Basilio


APHA/AWWA 4500-Norg B and 4500 NH3 F

Standard Methods for the Examination of Water and Wastewater 23rd Edition:2017 Macro Kjeldahl Method. Phenate Method (LR)




SN PWA Test No.

Category

Standard No. /

Method/ Issue Date


relevant section

Location / Facility



APHA/AWWA 4500-NH3 B & C

Standard Methods for the Examination of Water and Wastewater 23rd Edition:2017 Preliminary Distillation Step and Titrimetric Method (Nitrogen - Ammonia)


1. Ommen Varghese 2. Unnikrishnan 3. Deepu J Arackal 4. Aprilito Basilio 5. Ullas Unnikrishna Pillai 6. Deepthi Balakrishnan


APHA/AWWA 4500-NH3 F

Standard Methods for the Examination of Water and Wastewater 23rd Edition:2017 Phenate Method (Nitrogen - Ammonia)




APHA/AWWA 4500-NO2- B

Standard Methods for the Examination of Water and Wastewater 23rd Edition:2017 Colorimetric Method (Nitrogen - Nitrite)


1. Ommen Varghese 2. Unnikrishnan 3. Deepu J Arackal 4. Aprilito Basilio 5. Ullas Unnikrishna Pillai 6. Deepthi Balakrishnan


SN PWA Test No.

Category

Standard No. /

Method/ Issue Date


relevant section

Location / Facility



APHA/AWWA 4500-NO3- D

Standard Methods for the Examination of Water and Wastewater 23rd Edition:2017 Nitrate Electrode Method (Nitrogen - Nitrate)




APHA/AWWA 4500-NO3- E

Standard Methods for the Examination of Water and Wastewater 23rd Edition:2017 Cadmium Reduction Method (Nitrogen - Nitrate)




APHA/AWWA 4500-O C

Standard Methods for the Examination of Water and Wastewater 23rd Edition:2017 Azide Modification - Oxygen (Dissolved)




SN PWA Test No.

Category

Standard No. /

Method/ Issue Date


relevant section

Location / Facility



APHA/AWWA 4500-P B

Standard Methods for the Examination of Water and Wastewaters 23rd Edition:2017 Sample Preparation for Determination of Phosphorus




APHA/AWWA 4500- P C

Standard Methods for the Examination of Water and Wastewater 23rd Edition:2017 Vanadomolybdophosphoric Acid Colorimetric Method (Phosphorus)




APHA/AWWA 4500-P D

Standard Methods for the Examination of Water and Wastewater 23rd Edition:2017 Stannous Chloride Method (Phosphorus)




APHA/AWWA 4500-S2– D

Standard Methods for the Examination of Water and Wastewater 23rd Edition:2017




SN PWA Test No.

Category

Standard No. /

Method/ Issue Date


relevant section

Location / Facility


Methylene Blue Method (Sulfide)

285. 9.33 Environmental Chemistry - Water and astewater

APHA/AWWA 4500-S2- F

Standard Methods for the Examination of Water and Wastewater 22nd Edition: 2012 Sulfide - Iodometric Method




APHA/AWWA 4500-SiO2 C

Standard Methods for the Examination of Water and Wastewater 23rd Edition:2017 Molybdosilicate Method (Silica)


1. Ommen Varghese 2. Unnikrishnan 3. Deepu J Arackal 4. Aprilito S Basilio


APHA/AWWA 4500 SO42- C

Standard Methods for the Examination of Water and Wastewater 23rd Edition:2017 Sulfate - Gravimetric method




APHA/AWWA 5210 B and 4500-O C

Standard Methods for the Examination of Water and Wastewater 23rd Edition:2017 BOD Test. Determination of Dissolved Oxygen.




SN PWA Test No.

Category

Standard No. /

Method/ Issue Date


relevant section

Location / Facility


Biochemical Oxygen Demand - 5-Day


APHA/AWWA 5220 D

Standard Methods for the Examination of Water and Wastewater 23rd Edition:2017 Chemical Oxygen Demand (COD) Closed Reflux Colorimetric Method




APHA/AWWA 5310 B

Standard Methods for the Examination of Water and Wastewater 23rd Edition:2017 Total Organic Carbon (TOC), High Temperature Combustion Method


1. Unnikrishnan T 2. Deepu J Arackal 3. Sajeev Yohanan


APHA/AWWA 5520 B

Standard Methods for the Examination of Water and Wastewater 23rd Edition:2017 Liquid-liquid Partition Gravimetric Method (Oil and Grease)




SN PWA Test No.

Category

Standard No. /

Method/ Issue Date


relevant section

Location / Facility



APHA/AWWA 5520 D

Standard Methods for the Examination of Water and Wastewater 23rd Edition:2017 Soxhlet Extraction Method (Oil and Grease)




APHA/AWWA 5530 B & C

Standard Methods for the Examination of Water and Wastewater 22nd Edition: 2012 Clean up/Chloroform Extraction Method (Phenol)




APHA/AWWA 5540 C

Standard Methods for the Examination of Water and Wastewater 23rd Edition:2017 Anionic Surfactants as MBAS (Surfactants)




APHA/AWWA 6200 B

Standard Methods for the Examination of Water and Wastewaters 23rd Edition:2017 Purge and Trap Capillary Column Gas


1. Sajeev Yohannan 2. Theresa sayo 3. Sharib Raza


SN PWA Test No.

Category

Standard No. /

Method/ Issue Date


relevant section

Location / Facility


Chromatographic / Mass Spectrophotometric Method (Volatile Organic Compounds)


APHA/AWWA 6410 B

Standard Methods for the Examination of Water and Wastewaters 23rd Edition:2017 Liquid-Liquid Extraction Gas Chromatographic / Mass Spectrophotometric Method


1. Sajeev Yohannan 2. Theresa sayo 3. Sharib Raza


APHA/AWWA 10200 H

Standard Methods for the Examination of Water and Wastewater 23rd Edition:2017 Chlorophyll




ASTM D512 Standard Test Method for Chloride Ion in Water




SN PWA Test No.

Category

Standard No. /

Method/ Issue Date


relevant section

Location / Facility



ASTM D516 Standard Test Method for Sulfate Ion in Water


1. Ommen Varghese 2. Unnikrishnan 3. Deepu J Arackal 4. Aprilito Basilio 5. Lorenzo Bucasis


ASTM D1252 Standard Test Methods forChemical Oxygen Demand (Dichromate Oxygen Demand) of Water




ASTM D1498 Standard Test Method for Oxidation Reduction Potential of Water




ASTM D4458 Standard Test Method for Chloride Ion in Brackish water, Seawater, and Brines




ASTM D5176 Total Chemically Bound Nitrogen in water by Pyrolisis and Chemiluminescence Detection


1. Unnikrishnan 2. Deepu J Arackal


SN PWA Test No.

Category

Standard No. /

Method/ Issue Date


relevant section

Location / Facility



BS 1377-3:1990

Soils for civil engineering purposes: Chemical and Electro-chemical tests. Cl. 5 Determination of the sulphate content of soil and ground water




BS 1377-3:1990

Soils for civil engineering purposes: Chemical and Electro-chemical tests. Cl. 8 Determination of total dissolved solids




BS 6068-2.5:1995

Water Quality: Physical, chemical, and Biochemical methods - Determination of pH




BS EN ISO 9963- 1:1996, BS 6068- 2.51:1996

Water quality-Determination of alkalinity-Determination of total and composite alkalinity


1. Ommen Varghese 2. Unnikrishnan 3. Deepu J Arackal 4. Aprilito Basilio 5. Mark Magno


SN PWA Test No.

Category

Standard No. /

Method/ Issue Date


relevant section

Location / Facility



US EPA Method 110.2 -

US EPA - Methods For Chemical Analysis of Water and Wastes Color - Colorimetric Platinum Cobalt




US EPA Method 110.3

US EPA - Methods For Chemical Analysis of Water and Wastes Color Spectrophotometric




US EPA Method 120.1

S EPA - Methods For Chemical Analysis of Water and Wastes Conductance Specific Conductance




US EPA Method 150.1

US EPA - Methods For Chemical Analysis of Water and Wastes pH Electrometric




US EPA Method 160.1

US EPA - Methods For Chemical Analysis of Water and Wastes Residue Gravimetric Dried at 180C - Filterable


1. Ommen Varghese 2. Unnikrishnan T. 3. Deepu J Arackal


SN PWA Test No.

Category

Standard No. /

Method/ Issue Date


relevant section

Location / Facility



US EPA Method 160.2

US EPA - Methods For Chemical Analysis of Water and Wastes Gravimetric 103- 105 C (Non Filterable)




US EPA Method 160.3

S EPA - Methods For Chemical Analysis of Water and Wastes Residue, Total Gravimetric, Dried at 103-105C




US EPA Method 160.4

US EPA - Methods For Chemical Analysis of Water and Wastes Volatile Gravimetric Ignition at 150 C




US EPA Method 180.1

US EPA - Methods For Chemical Analysis of Water and Wastes. Alkalinity Nephelometric




US EPA Method 215.2

US EPA - Methods For Chemical Analysis of Water and Wastes. Calcium EDTA Titrimetric method




SN PWA Test No.

Category

Standard No. /

Method/ Issue Date


relevant section

Location / Facility



US EPA Method 300.1

US EPA - Methods For Chemical Analysis of Water and Wastes Determinationof inorganic anions in drinking water by ion chromatography




US EPA Method 305.1

US EPA - Methods For Chemical Analysis of Water and Wastes Acidity Method 305.1 - Titrimetric





US EPA - Methods For Chemical Analysis of Water and Wastes. Alkalinity Titrimetric (pH - 4.5)




US EPA Method 330.5

US EPA - Methods For Chemical Analysis of Water and Wastes Total Residual - Spectrophotometric DPD


1. Ommen Varghese 2. Unnikrishnan 3. Deepu J Aracka 4. Aprilito S Basilio


US EPA Method 340.1

US EPA - Methods For Chemical Analysis of Water and Wastes




SN PWA Test No.

Category

Standard No. /

Method/ Issue Date


relevant section

Location / Facility


Fluoride SPADNS method



US EPA - Methods For Chemical Analysis of Water and Wastes. Nitrogen Ammonia Titrimetric Distillation Procedure




US EPA Method 351.3

US EPA - Methods For Chemical Analysis of Water and Wastes Nitrogen Total, Kjeldahl Colorimetric, Titrimetric, or Potentionmetric




US EPA - Methods For Chemical Analysis of Water and Wastes Nitrite Method 354.1

Spectrophotometric Street No. 2 Water/Wastewater testing



SN PWA Test No.

Category

Standard No. /

Method/ Issue Date


relevant section

Location / Facility



US EPA Method 360.2

US EPA - Methods For Chemical Analysis of Water and Wastes. Oxygen -Dissolved Modified Winkler (Full Bottle Technique)




US EPA Method 375.4

US EPA - Methods For Chemical Analysis of Water and Wastes Sulfate Turbidimetric




US EPA Method 420.1

US EPA - Methods For Chemical Analysis of Water and Wastes Spectrophotometric Manual 4-AAP with distillation (Phenolic, Total Recoverable)




US EPA Method 425.1

US EPA - Methods For Chemical Analysis of Water and Wastes Methylene Blue Active Substances (MBAS) Colorimetric




US EPA Method 1664, Revision A

US EPA - Methods For Chemical Analysis of Water and Wastes. N- Hexane




SN PWA Test No.

Category

Standard No. /

Method/ Issue Date


relevant section

Location / Facility


Extractable Material (HEM; Oil and Grease) and Silica Gel Treated N-Hexane Extractable Material (SGTHEM; Non-polar Material) by Extraction and Gravimetry


US EPA Method 3060A and 7196A

US EPA -Methods For Chemical Analysis of Water and Wastes Chromium, Hexavalent (Colorimetric)


1. Adolf Xavier 2. Sreejesh T.S


US EPA Method 3510C / 8270 D

US EPA - Methods For Chemical Analysis of Water and Wastes Semi- Volatile Organic Compounds By Gas Chromatography/Mass Spectrometry (GC/MS)




SN PWA Test No.

Category

Standard No. /

Method/ Issue Date


relevant section

Location / Facility



US EPA Method 5030/5035/8260C

US EPA - Methods For Chemical Analysis of Water and Wastes 5030 Purge and Trap for Aqueous Sample / Closed System Purge and Trap and Extraction for Volatile Organics in Soil and Waste Sample/ Trihalomethane in water




US EPA Method 5030 C / 8260 C

US EPA – Methods For Chemical Analysis of Water and Wastes. Purge and Trap for Aqueous Sample/ BTEX in water - Volatile Organic Compounds By Gas Chromatography/ Mass Spectrometry (GC/MS)




SN PWA Test No.

Category

Standard No. /

Method/ Issue Date


relevant section

Location / Facility



US EPA Method 9060A

US EPA - Methods For Chemical Analysis of Water and Wastes Total Organic Carbon


1. Deepu J Arackal 2. Unnikrishnan 3. Sajeev Yohannan


- Water, Wastewater - Organics

US EPA Method 8015C

US EPA - Methods for Chemical Analysis of Water and Wastes Nonhalogenated Organics By Gas Chromatography (GC- FID)





US EPA Method 8041A

US EPA - Methods for Chemical Analysis of Water and Wastes Phenols By Gas Chromatography





US EPA Method 8081B

US EPA - Methods for Chemical Analysis of Water and Wastes. Organochlorine Pesticides By Gas Chromatography




SN PWA Test No.

Category

Standard No. /

Method/ Issue Date


relevant section

Location / Facility




US EPA Method 8260 C

US EPA - Methods For Chemical Analysis of Water and Wastes Volatile Organic Compounds By Gas Chromatography/ Mass Spectrometry (GC/MS)





US EPA Method 8270D

US EPA - Methods for Chemical Analysis of Water and Wastes Semivolatile Organic Compounds by Gas Chromatography/Mass Spectrometry (GC/MS) and GC-FID





US EPA Method 9065

US EPA - Methods for Chemical Analysis of Water and Wastes Phenolics (Spectrophotometric, Manual 4-AAP With Distillation)



342.

Environmental Chemistry - Water and Wastewater, Sediment, Soil, and

US EPA Method 6010C

US EPA – Methods For Chemical Analysis of Water and Wastes Revision 3 February 2007 Inductively Coupled Plasma –




SN PWA Test No.

Category

Standard No. /

Method/ Issue Date


relevant section

Location / Facility


Sludge - Metals

Atomic Emission Spectgrometry Al, Ba, Be, B, Cd, Cr, Cu, Co, Ca, Fe, Pb, Li, Mg, Mo, Ni, Zn, Sb, As, Hg, K, Se, Si, Ag, Na, Sr, Tl, Sn, Ti, V, W

343. 5.99 Fly Ash/Microsilica/ GGBS/ Admixture

ASTM C114 Standard Test Methods for Chemical Analysis of Hydraulic CementsSilicon Dioxide-Reference Test Method Cl. 8




ASTM C114 Standard Test Methods for Chemical Analysis of Hydraulic Cements Ammonium Hydroxide Group-Reference Test Method Cl. 9




ASTM C114 Standard Test Methods for Chemical Analysis of Hydraulic Cements Zinc Oxide-Reference Test Method Cl. 13)




SN PWA Test No.

Category

Standard No. /

Method/ Issue Date


relevant section

Location / Facility



ASTM C114 Standard Test Methods for Chemical Analysis of Hydraulic Cements Calcium Oxide-Reference Test Method Cl. 15




ASTM C114 Standard Test Methods for Chemical Analysis of Hydraulic Cements Magnesium Oxide-Reference Test Method Cl. 16




ASTM C114 Standard Test Mthods for Chemical Analysis of Hydraulic Cements - Sulfur Cl. 17




SN PWA Test No.

Category

Standard No. /

Method/ Issue Date


relevant section

Location / Facility



ASTM C114 Standard Test Methods for Chemical Analysis of Hydraulic Cements - Chloroform-Soluble Organic Substances-Reference Test Method Cl. 22




ASTM C311/C311M

Sampling and Testing Fly Ash or Natural Pozzolans for use in Portland Cement Concrete




ASTM C311/C311M

Standard Test Methods for Sampling and Testing Fly Ash or Natural Pozzolans for Use in Portland-Cement Concrete Moisture content




ASTM C494/C494M

Standard specification for Chemical Admixtures for Concrete




SN PWA Test No.

Category

Standard No. /

Method/ Issue Date


relevant section

Location / Facility



ASTM C618 Standard Specification for Coal Fly Ash and Raw or Calcined Natural Pozzolan for Use in Concrete




ASTM C1240 Standard Specificatin for Silica Fume Used in Cementitious Mixtures




ASTM E70 Standard Test Method for pH of Aqueous solutions with the glass electrodes




BS EN 450-1:2012

Fly ash for concrete-Definition, specifications and conformity criteria




BS EN 480-8:2012

Admixture for concrete, mortar and grout - Test Methods Part 8; Determination of the conventional dry material content




SN PWA Test No.

Category

Standard No. /

Method/ Issue Date


relevant section

Location / Facility



BS EN 480-10-2009

Admixture for concrete, mortar and grout - Test Methods Part 10: Method 1 Determination of water soluble chloride content




BS EN 15167-1: 2006

Ground granulated blast furnace slag for use in concrete, mortar and grout. Definitions, specifications and conformity criteria Annex A: Method for determining the moisture content of granulated blast furnace slag



360.

Food Microbiology

AOAC Official Method 2000.14 Reveal Test

Detection of Escherichia coli O157 By Reveal Test

Street No.2 - Food Microbiology Lab

1. Prajin Prameswaran 2. Roberto Duran


SN PWA Test No.

Category

Standard No. /

Method/ Issue Date


relevant section

Location / Facility


361.

Food Microbiology

CCFRA 2.4.2:2003 Guideline No. 24 5th Edition

Detection and Enumeration of Escherichia coli using Chromogenic Medium: Pour Plate Technique

Street No. 2 Food Lab


362.

Food Microbiology

CCFRA Guideline No. 43 - Manual of Microbiological Methods for the food and Drinks Industry 5th Ed. 2007 - Method 1.1.1:2007 Test 6.2.1

Standard Plate Count (Total Viable Count) - Pour Plate Technique



363.

Food Microbiology

CCFRA Guideline No. 43 - Manual of Microbiological Methods for the food and Drinks Industry 5th

Mesophilic Spore Count-Pour Plate




SN PWA Test No.

Category

Standard No. /

Method/ Issue Date


relevant section

Location / Facility


Ed. 2007 - Method 1.2.1:2003-Test 6.8.1

364.

Food Microbiology

CCFRA Guideline No. 43 - Manual of Microbiological Methods for the food and Drinks Industry 5th Ed. 2007 - Method 2.2.1:2007

Enumeration of Coliforms-Colony Count Technique



365.

Food Microbiology


Enumeration of Enterobacteriaceae-Colony Count Technique




SN PWA Test No.

Category

Standard No. /

Method/ Issue Date


relevant section

Location / Facility


366.

Food Microbiology

CCFRA Guideline No. 43 - Manual of Microbiological Methods for the food and Drinks Industry 5th Ed. 2007 - Method 2.5.1:2003 Test-6.2.1

Enumeration of Pseudomonas Species: Colony Coount Technique



367.

Food Microbiology

CCFRA Guideline No. 43 - Manual of Microbiological Methods for the food and Drinks Industry 5th Ed. 2007 - Method 2.5.2:2003 Test-6.2.1

Enumeration of Pseudomonas aeruginosa: Colony Coount Technique




SN PWA Test No.

Category

Standard No. /

Method/ Issue Date


relevant section

Location / Facility


368.

Food Microbiology

CCFRA Guideline No. 43 - Manual of Microbiological Methods for the food and Drinks Industry 5th Ed. 2007 - Method 3.1.2&5:2007

Detection of Salmonella: Cultural Method


Prajin PrameswaranRoberto Duran

369.

Food Microbiology

CCFRA Guideline No. 43 - Manual of Microbiological Methods for the food and Drinks Industry 5th Ed. 2007 - Method 3.2.2&7:2007

Detection of Listeria monocytogenes and other Listeria species: Cultural Method




SN PWA Test No.

Category

Standard No. /

Method/ Issue Date


relevant section

Location / Facility


370.

Food Microbiology


Detection of thermotolerant Campylobacter Species



371.

Food Microbiology


Enumeration of Clostridium perfringens: Colony Count Technique



372.

Food Microbiology

CMMEF 5th Ed. - Chapter 9

Enumeration of Coliforms, Fecal coliforms and Escherichia coli by MPN Method




SN PWA Test No.

Category

Standard No. /

Method/ Issue Date


relevant section

Location / Facility


373.

Food Microbiology


Yeast and Molds -Spread plate Technique



374.

Food Microbiology


Enumeration of Bacillus cereus



375.

Food Microbiology

Reveal 2.0 Assay Test for Listeria -Neogen-Corporation -GL-SOP-CHE-175

Detection of Listeria species



376.

Food Microbiology

USFDA, BAM Chapter 3-January 2007

Aerobic plate count-Conventional Plate Count Method



377.

Food Microbiology

USFDA, BAM Chapter 9 -May 2004

Enumeration of Vibrio parahaemolyticus by MPN Method



378.

Food Microbiology

USFDA, BAM Chapter 12 -March 2016

Staphylococcus aureus-Direct Plate Count Method

Street No.2 - Food



SN PWA Test No.

Category

Standard No. /

Method/ Issue Date


relevant section

Location / Facility


Microbiology Lab

379.

Garnet ISO 11127-3: 2011 (E)

Preparation of steel substrates before application of paints and related products - Test Methods for non metallic blast-cleaning abrasives- Part 3: Determination of apparent density


1. Nikhil P-Max 2. Jordan Rotea 3. Annabel Ibisate 4. Catherine Felonia 5. Lorenzo Bucasas

380. Garnet ISO 11127-4:2011 (E)

Preparation of steel substrates before application of paints and related products- Test methods for non-metallic blast-cleaning abrasives-Part 4: Assessment of hardness by a glass slide test


1. Nikhil P-Max 2. Jordan Rotea 3. Annabel Ibisate

381.

Garnet ISO 11127-5: 2011 (E)

Preparation of steel substrates before application of paints and related products - Test Methods for non metallic blast-cleaning abrasives-




SN PWA Test No.

Category

Standard No. /

Method/ Issue Date


relevant section

Location / Facility


Part 5: Determination of Moisture

382.

Garnet ISO 11127-6: 2011 (E)

Preparation of steel substrates before application of paints and related products - Test Methods for non metallic blast-cleaning abrasives- Part 6: Determination of water soluble contaminants by conductivity measurement



383. 8.99 Geotechnical ASTM C1353/C1353M

Standard Test Method for Abrasive Resistance of Dimension Stone Subjected to Foot Traffic using a Rotary Platform, Double Head Abraser

Street No. 13 Geotechnical Lab

1, Sreejith S Kumar 2. Nidhish K.J. 3. Vishnu V Pillai

384. 8.99 Geotechnical ASTM D3967 Standard Test Method for Splitting Tensile Strength of Intact Rock Core Specimens


1. Sreejith S Kumar 2. Anoop K G 3. Vishnu V Pillai


SN PWA Test No.

Category

Standard No. /

Method/ Issue Date


relevant section

Location / Facility


385. 8.40 Geotechnical ASTM D4543 Standard Practices for Preparing rock core as cylindrical test specimens and verifying conformance to dimensional and shape tolerances


1. Sreejith S Kumar 2. Anoop K G 3. Vishnu V Pillai 4. Appu George

386. 8.50 Geotechnical ASTM D7012 Standard Test Methods for Compressive Strength and elastic moduli of intact rock core specimens under varying stress and temp-Test D - Method D: Elastic Moduli of Intact Rock Core Specimens in Uniaxial Compression.



387. 8.99 Geotechnical ASTM D7625 Standard Test Method for Laboratory determination of abrasiveness of rock using the cerchar method




SN PWA Test No.

Category

Standard No. /

Method/ Issue Date


relevant section

Location / Facility


388. 8.20 Geotechnical ASTM G57 Standard Test Method for Field measurement of Soil Resistivity Using the Wenner Four Electrode Method


1. Binoy Thomas 2. Akbar Mohamad

389. 8.99 Geotechnical BS 1377-3:1990

Soils for civil engineering purposes: Chemical and Electro-chemical tests Cl. 6.3 Determination of the carbonate content (Rapid titration method)



390. 1.26 Geotechnical BS 1377-3:1990

Soils for civil engineering purposes: Chemical and Electro-chemical tests Determination of the chloride content (Cl. 7.2 Determination of water- soluble chloride content)




SN PWA Test No.

Category

Standard No. /

Method/ Issue Date


relevant section

Location / Facility


391. 1.27 Geotechnical BS 1377-3:1990

Soils for civil engineering purposes: Chemical and Electro-chemical tests Determination of the chloride content (Cl. 7.3 Determination of acid-soluble chloride content)



392. 8.99 Geotechnical BS 1377-3:1990

Soils for civil engineering purposes: Chemical and Electro-chemical tests Cl. 9.5 Determination of the pH value (Electrometric method of pH determination)



393. 8.60 Geotechnical BS 1377-5:1990

Soils for civil engineering purposes: Compressibility, permeability, and durability tests. Cl. 3 Determination of the one-dimensional




SN PWA Test No.

Category

Standard No. /

Method/ Issue Date


relevant section

Location / Facility


consolidation properties

394. 8.20 Geotechnical BS 1377 Part 7:1990

Soils for civil engineering purposes: Shear Strength test (Total Stress). Cl. 8 Determination of the undrained shear strength in triaxial compression without measurement of pore pressure (definitive method)



395. 8.99 Geotechnical BS 1377-9:1990

Soils for civil engineering purposes: In Situ Tests. Cl. 3.3 Determination of the penetration resistance using the split-barrel sampler (the standard penetration test SPT)


1. Anoop K G 2. Vishnu V Pillai 3. Sreejith S Kumar


SN PWA Test No.

Category

Standard No. /

Method/ Issue Date


relevant section

Location / Facility


396. 8.21 Geotechnical BS 1377-9:1990

Soils for civil engineering purposes: In Situ Tests. Cl. 4.1 Determination of the vertical deformation and strength characteristics of soil by the plate loading test


1. Akbar Mohamad 2. Justin Jose 3. John Borja 4. Ricardo Ranches

397. 8.22 Geotechnical BS 1377-9:1990

Soils for civil engineering purposes: In Situ Tests. Cl. 4.3 Determination of the in-situ California Bearing Ratio (CBR)


1. Abdul Rafeeq 2. Justin Jose 3. John Borja 4. Ricardo Ranches

398. 8.01 Geotechnical BS 5930-A2:2010

Code of Practice for Site Investigations Procedure Cl. 6


1. Sananth M.N.Durga 2. Barshyal Abdul 3. Rahman Bal Doj Karki


Code of Practice for Site Investigations Sampling the ground Cl. 22


1. Hiralal 2. Badal 3. Bishnu


Code of Practice for Site Investigations Groundwater Cl. 23


1. Nizam 2. Hiralal Badal Bishnu


SN PWA Test No.

Category

Standard No. /

Method/ Issue Date


relevant section

Location / Facility



Code of Practice for Site Investigations Tests in boreholes Cl. 25


1. Vineeth Nair 2. Javed 3. Sujin


Code of Practice for Site Investigations Pumping Test Cl. 27


1. Vineeth Nair 2. Javed 3. Sujin


Code of Practice for Site Investigations Reports Cl. 47


1. Sananth M.N. 2. Durga Barshyal 3. Abdul Rahman 4. Bal Doj Karki

404. 8.99 Geotechnical ISRM 1978 ISRM 1978 (2007 Edition) Page 91 Determination of Hardness and Abrasiveness of Rock


1. Sreejith S Kumar 2. Nidhish K.J. 3. Appu George

405. 8.99 Geotechnical ISRM 1978 ISRM 1978 (2007 Edition) Cl. 3 Laboratory testing of Rock Swelling ISRM Part 2 (1999-2006) p 295


1. Sreejith S Kumar 2. Nidhish K.J.


SN PWA Test No.

Category

Standard No. /

Method/ Issue Date


relevant section

Location / Facility


406.

Gypsum ASTM C471M

Standard Test Methods for Chemical Analysis of Gypsum and Gypsum Products-Metric



407.

Gypsum ASTM C471M

Standard Test Method for Chemical Analysis of Gypsum and Gypsum Products (Metric) - Free Water Cl. 7



408.

Gypsum ASTM C471M

Standard Test Method for Chemical Analysis of Gypsum and Gypsum Products (Metric) - Combined water Cl. 8



409.

Gypsum ASTM C471M

Standard Test Method for Chemical Analysis of Gypsum and Gypsum Products (Metric) - Silicon Dioxide and insoluble Matter Cl. 10




SN PWA Test No.

Category

Standard No. /

Method/ Issue Date


relevant section

Location / Facility


410.

Gypsum ASTM C471M

Standard Test Method for Chemical Analysis of Gypsum and Gypsum Products (Metric) - Iron and Aluminium Oxide Cl. 11



411.

Gypsum ASTM C471M

Standard Test Method for Chemical Analysis of Gypsum and Gypsum Products (Metric) - Calcium Oxide Cl. 12



412.

Gypsum ASTM C471M

Standard Test Method for Chemical Analysis of Gypsum and Gypsum Products (Metric) - Sulfur trioxide Cl.14



413.

Gypsum ASTM C471M

Standard Test Method for Chemical Analysis of Gypsum and Gypsum Products (Metric) - Chloride Cl. 15




SN PWA Test No.

Category

Standard No. /

Method/ Issue Date


relevant section

Location / Facility


414. 4.07 Kerb Stone BS EN 1340:2000

Concrete kerb units — Requirements and test methods. Annex E Determination of total water absorption


1. Rowena Cierva 2. Franco Berdote 3. Shanjib Kumar 4. Rishi Ram

415. 4.06 Kerbs Stone BS EN 1340: 2003(E) ANNEX C (Normative)

Measurement of Dimensions of a Single Unit


1. Girish Kumar

416. 4.08 Kerb Stone BSEN 1340: 2003(E) ANNEX F (Normative)

Measurement of Bending Strength


1. Girish Kumar

417.

Limestone ASTM C25 Chemical Analysis of Limestone, Quicklime, and Hydrated Lime - Calcium and Magnesium Oxide-Alternative EDTA Titration Method Cl.31



418.

Limestone ASTM C25 Chemical Analysis of Limestone, Quicklime, and Hydrated Lime Insoluble Matter Including Silicon




SN PWA Test No.

Category

Standard No. /

Method/ Issue Date


relevant section

Location / Facility


Dioxide-Optional Perchloric Acid Method Cl. 9)

419.

Limestone ASTM C25 Chemical Analysis of Limestone, Quicklime, and Hydrated Lime - Loss on Ignition Cl. 19



420.

Limestone ASTM C25 Chemical Analysis of Limestone, Quicklime, and Hydrated Lime - Silicon Dioxide Cl. 10



421.

Limestone ASTM C25 Chemical Analysis of Limestone, Quicklime, and Hydrated Lime - Total Sulfur by Sodium Carbonate Fusion Cl. 24



422.

Limestone US EPA Method 6010C

US EPA - Methods For Chemical Analysis of Water and Wastes Revision 3 February 2007 Method 6010C Inductively Coupled Plasma- Atomic Emission


1. Adolf Xavier 2. Jordan Rotea 3. Srejeesh Sasidharan


SN PWA Test No.

Category

Standard No. /

Method/ Issue Date


relevant section

Location / Facility


Spectrometry (Aluminum Oxide, Ferric Oxide, Titanium Dioxide, Potassium Oxide, Sodium Oxide, and Phosphorus Only

423. 4.03 Masonry BS 6073-1:1981

Precast concrete masonry units-Specification for precast concrete masonry units (Compressive Strength)



424. 4.13 Masonry BS 6717:2001

Precast, unreinforced concrete paving blocks-Requirements and Test Methods Annex B - Measurement of the dimensions of a single paving block


1. Rajeev Matthew 2. Bineesh

425. 4.05 Masonry BS EN 771-3:20119

Specification for masonry units- Aggregate concrete masonry units-dense and lightweight aggregates (Water Absorption)




SN PWA Test No.

Category

Standard No. /

Method/ Issue Date


relevant section

Location / Facility


426. 4.04 Masonry Units

BS EN 772-1- 2011+A1:2015

Compressive Strength of Concrete Masonry Blocks


1. Rajeev Matthew 2. Girish Kumar

427. 4.09 Masonry BS EN 1338:2003

Concrete paving blocks-Requirements and Test Methods- Annex E - Determination of total water absorption


1. Rowena Cierva 2. Franco Berdote

428. 4.1 Masonry Units

BS EN 1338: 2003

Tensile Strength of Paving Blocs Annex F


1. Rajeev Matthew 2. Girish Kumar

429. 9.87 Microbiology APHA/AWWA 9213E

Standard Methods for the Examination of Water and Wastewater 23rd Edition:2017. Membrane Filter Technique for Pseudomonas aeruginosa

Street No. 2 Enviromental-Microbiology Lab

1. Prajin K.Parameshwaran 2. Roberto Duran

430. 9.99 Microbiology APHA/AWWA 9215 B

Standard Methods for the Examination of Water and Wastewater 23rd Edition:2017.




SN PWA Test No.

Category

Standard No. /

Method/ Issue Date


relevant section

Location / Facility


Heterotrophic plate count (pour plate method)

431. 9.99 Microbiology APHA/AWWA 9215 D

Standard Methods for the Examination of Water and Wastewater 23rd Edition:2017 Heterotrophic Plate Count Membrane Filter Method




Standard Methods for the Examination of Water and Wastewater 23rd Edition:2017 Standard Total Coliform Fermentation Technique (Multiple-Tube Fermentation Technique)



433. 9.99 Microbiology APHA/AWWA 9221 E

Standard Methods for the Examination of Water and Wastewater 23rd Edition:2017 Fecal Coliform Procedure (Multiple-Tube




SN PWA Test No.

Category

Standard No. /

Method/ Issue Date


relevant section

Location / Facility


Fermentation Technique)*

434. 9.99 Microbiology APHA/AWWA 9221 F

Standard Methods for the Examination of Water and Wastewater 23rd Edition:2017 Escherichia Coli Procedure Using Fluorogenic Substrate* (Multiple-Tube Fermentation Technique)




Standard Methods for the Examination of Water and Wastewater 23rd Edition:2017. Membrane Filter Techniques. Standard Total Coliform Membrane Filter Procedure



436. 9.80 Microbiology APHA/AWWA 9222 B and 9222 G.2

Standard Methods for the Examination of Water and Wastewater 23rd Edition:2017.




SN PWA Test No.

Category

Standard No. /

Method/ Issue Date


relevant section

Location / Facility


Membrane Filter Techniques- Standard Total Coliform Membrane Filter Procedure (Total coliform) & MF Partition procedures (Escherichia coli)


Standard Methods for the Examination of Water and Wastewater 23rd Edition:2017. Fecal Coliform




Standard Methods for the Examination of Water and Wastewater 23rd Edition:2017. Enzyme Substrate Test E. Coli




Standard Methods for the Examination of Water and Wastewater 23rd Edition:2017. Enzyme Substrate Test Fecal coliform

Street No. 2 Enviromental- Microbiology



SN PWA Test No.

Category

Standard No. /

Method/ Issue Date


relevant section

Location / Facility



Standard Methods for the Examination of Water and Wastewater 23rd Edition:2017. Enzyme Substrate Test Total coliform



441. 9.88 Microbiology APHA/AWWA 9230 C

Standard Methods for the Examination of Water and Wastewater 23rd Edition:2017. Faecal Enterococcus/Streptococcus Group. Membrane Filter Techniques




Standard Methods for the Examination of Water and Wastewater 23rd Edition:2017. Faecal Enterococcus/ Streptococcus Group. Fluorogenic Substrate Enterococcus Test




Standard Methods for the Examination of Water and Wastewater 23rd




SN PWA Test No.

Category

Standard No. /

Method/ Issue Date


relevant section

Location / Facility


Edition:2017. Iron and Sulfur Bacteria. Enumerating, Enriching, and Isolating Iron and Sulfur Bacteria


Standard Methods for the Examination of Water and Wastewater 23rd Edition:2017. Iron and Sulfur Bacteria. Iron Bacteria



445. 9.99 Microbiology APHA/AWWA 10750

Standard Methods for the Examination of Water and Wastewater 23rd Edition:2017. Nematological Examination



446. 9.99 Microbiology BS EN ISO 16266:2008

Water quality-Detection and enumeration of Pseudomonas aeruginosa-Method by membrane filtration




SN PWA Test No.

Category

Standard No. /

Method/ Issue Date


relevant section

Location / Facility


447. 9.99 Microbiology BS EN ISO 111731.2:2008

Water quality. Detection and enumeration of Legionella. Direct membrane filtration method for waters with low bacterial counts



448. 9.99 Microbiology Laboratory Manual of Parasitological and Bacteriological Techniques

WHO, Laboratory Manual of Parasitological and Bacteriological Techniques/Microscopic Examination (Helminth and Nematode)




WHO, Laboratory Manual of Parasitological and Bacteriological Techniques/Microscopic Examination (Helminth and Nematode) - Analysis of Wastewater for use in Agriculture




SN PWA Test No.

Category

Standard No. /

Method/ Issue Date


relevant section

Location / Facility



WHO, Laboratory Manual of Parasitological and Bacteriological Techniques -Nematode Egg/Helminth Ova Section 2.1 The Modified Bailenger Method



451. 9.99 Microbiology Manual of Microbiological Methods for the Food and Drinks Industry CCFRA 1.1.1

Manual of Microbiological Methods for the food and drinks Industry 5th Edition Guideline No.43 Standard Plate Count: CCFRA1.1.1:2007 - Total Bacterial Count (TBC) for Swab (Aerobic/ Anerobic)



452. 9.99 Microbiology Manual of Microbiological Methods for the Food and Drinks Industry CCFRA 1.1.4

Manual of Microbiological Methods for the food and drinks Industry 5th Edition Guideline No.43 Standard Plate Count: CCFRA 1.1.4: 2003- Total Bacterial




SN PWA Test No.

Category

Standard No. /

Method/ Issue Date


relevant section

Location / Facility


Count (Pour Plate Method)

453. 9.99 Microbiology US EPA Method 9132

US EPA - Methods For Chemical Analysis of Water and Wastes Total Coliform: Membrane-Filter Technique



454. 4.11 Paving Flags and Slabs

BS EN 1339: 2003(E) ANNEX E (Normative)

Determination of Total Water Absorption


1. Rowena Cierva 2. Nilam Khadka 3. Shanjib Kumar 4. Rian Gagasa

455. 4.12 Paving Flags and Slabs

BSEN 1339: 2003(E) ANNEX F (Normative)

Measurement of Bending Strength and Breaking Load


1. Girish Kumar 2. Lijo Thomas

456.

Petroleum Products

ASTM D93 Standard Test Methods for Flash Point by Pensky- Martens Closed Cup Tester




SN PWA Test No.

Category

Standard No. /

Method/ Issue Date


relevant section

Location / Facility


457.

Petroleum Products

ASTM D95-13e1

Standard Test Method for Water in Petroleum Products and Bituminous Materials by Distillation1



458.

Petroleum Products

ASTM D482-13

Standard Test Method for Ash from Petroleum Products1



459.

Petroleum Products

ASTM D874-13a (2018)

Standard Test Method for Sulfated Ash from Lubricating Oils and Additives



460.

Petroleum Products

ASTM D2270 Standard Practice for Calculating Viscosity Index From Kinematic Viscosity at 40 and 100°C



461.

Petroleum Products

ASTM D2896 Standard Test Method for Base Number of Petroleum Products by Potentiometric Perchloric Acid Titration




SN PWA Test No.

Category

Standard No. /

Method/ Issue Date


relevant section

Location / Facility


462.

Petroleum Products

ASTM D4052 − 18

Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter1



463.

Petroleum Products

ASTM D4739 Standard Test Method for Base Number Determination by Potentiometric Hydrochloric Acid Titration



464.

Petroleum Products

ASTM D6217-10

Particulate Contamination in Middle Distillate Fuels by Laboratory Filtration1, mg/kg



465.

Petroleum Products

ASTM D6304 Standard Test Method for Determination of Water in Petroleum Products, Lubricating Oils, and Additives by Coulometric Karl Fischer Titration




SN PWA Test No.

Category

Standard No. /

Method/ Issue Date


relevant section

Location / Facility


466.

Petroleum Products

ASTM E2412-10(2018)

Condition Monitoring of In-Service Lubricants by Trend Analysis Using Fourier Transform Infrared (FT-IR) Spectrometry1



467.

Petroleum Products

IP 440 Liquid petroleum products - Determination of contamination in middle distillates



468.

Petroleum Products

ISO 2719 Determination of flash point —Pensky-Martens closed cup method



469. Petroleum Products

ISO 3675 Methods of test for petroleum and its products — BS 2000-160: Crude petroleum and liquid petroleum products — Laboratory determination of density — Hydrometer method (ISO 3675:1998)


1. Eldhose Annas 2. Frederick Andal 3. Kristofferson Cajano


SN PWA Test No.

Category

Standard No. /

Method/ Issue Date


relevant section

Location / Facility


470.

Petroleum Products

ISO 4406-17 Hydraulic fluid power — Fluids — Method for coding the level of contamination by solid particles



471. Petroleum Products

ISO 12185 Methods of test for petroleum and its products. Part 365— Crude petroleum and petroleum products — Determination of density — Oscillating U Tube method (ISO 12185:1996)


1. Eldhose Annas 2. Frederick Andal 3. Kristofferson Cajano

472. 2.16 Road Base AASHTO T-304

Standard Method of Test for Uncompacted Void Content of Fine Aggregates


1. Tyson Daniel 2. Ricardo Patam 3. Sateesh Babu

473.

Rock ASTM D4644 Standard Test Method for Slake Durability of Shales and weak rock


1. Nidhish K. J. 2. Binoy Thomas 3. Akbar Puthenveetil

474. 8.30 Rock ASTM D5731 Determination of Point load Index of rock


1. Nidhish K. J. 2. Sreejith S. Kumar 3. Appu George


SN PWA Test No.

Category

Standard No. /

Method/ Issue Date


relevant section

Location / Facility


475.

Rock ASTM D5873 Determination of Rock Hardness by Rebound Hammer


1. Nidhish K. J. 2. Sreejith S. Kumar 3. Appu George 4. Mohammad Bilal

476. 1.99 Soil AASHTO T-89

Standard Method of Test for Determining the Liquid Limit of Soils


1. Bhim Bahadur 2. Geronimo Mateo 3. Rommel Manalo 4. Anoop KG 5. Akbar Puthenveetil 6. Geronimo Mateo 7. Binoy Thomas 8. Shabeel KP


Standard Method of Test for Determining the Plastic Limit and Plasticity Index of Soils


1. Bhim Bahadur 2. Geronimo Mateo 3. Rommel Manalo 4. Anoop KG 5. Akbar Puthenveetil 6. Binoy Thomas 7. Shabeel KP


Moisture Density Relation of Soil using 4.5kg Rammer and 457mm Drop


1. Bhim Bahadur 2. Akbar Puthenveetil 3. Sreejith S Kumar 4. Binoy Thomas 5. Sateesh Babu 6. Anoop KG 7. Geronimo Mateo 8. Shabeel KP


SN PWA Test No.

Category

Standard No. /

Method/ Issue Date


relevant section

Location / Facility


479. 1.99 Soil AASHTO T 267-86

Determination of Organic content in soils by loss of ignition



480. 1.99 Soil AASHTO T 290-95

Water-soluble sulfate content in soil



481. 1.99 Soil AASHTO T 291-94

Water-soluble chloride ion content in soil



482. 1.99 Soil APHA/AWWA 4500 Norg and 4500 NH3 B

Standard Method s for the examination of water and Wastewater 23rd Edition:2017 Preliminary Digestion Step


1. Kristofferson Cajano 2. Nikhil P-Max 3. Jordan Rotea 4. Catherine Felonia


SN PWA Test No.

Category

Standard No. /

Method/ Issue Date


relevant section

Location / Facility


483. 1.99 Soil APHA/AWWA 4500 Norg B

Standard Method s for the examination of water and Wastewater 23rd Edition:2017 Nitrogen (Organic) Macro- Kjeldahl Method



484. 1.99 Soil APHA/AWWA 4500-Norg B and NH3 C (TKN)

Standard Methods for the Examination of Water and Wastewater 23rd Edition:2017 Nitrogen (Organic) Macro-Kjeldahl Method (TKN)



485. 1.99 Soil APHA/AWWA 4500 NH3 B and NH3 C

Standard Methods for the Examination of Water and Wastewater 23rd Edition:2017 Nitrogen (Ammonia) Preliminary Digestion Step and Titrimetric Method




SN PWA Test No.

Category

Standard No. /

Method/ Issue Date


relevant section

Location / Facility


486. 1.01 Soil ASTM C702/C702M

Standard Practice for Reducing Samples of Aggregate to Testing Size


1. Jestin Jose 2. Aju Abraham John 3. Rishi Ram 4. Marlon Pandaan 5. Richard Dennis Asis

487. 1.99 Soil ASTM C1580 Standard Test Method for Water Soluble Sulfate in Soil


1. Kristofferson Cajano 2. Nikhil P. Max 3. Jordan Rotea 4. Lorenzo Bucasas

488. Soil ASTM D854 Standard Test Methods for Specific Gravity of Soil Solids by Water Pycnometer


1. Anoop KG 2. Shabeel 3. Geronimo Mateo

489. 1.04 Soil ASTM D1140 Standard Test Methods for Determining the Amount of Material Finer than 75- μm (No. 200) Sieve in Soils by Washing


1. Anoop KG 2. Tyson Daniel 3. Sateesh Babu


SN PWA Test No.

Category

Standard No. /

Method/ Issue Date


relevant section

Location / Facility


490. 1.08 Soil ASTM D1556 Standard Test Method for Density and Unit weight of soil in place by Sand Cone Method


1. Anoop KG 2. Sateesh Babu

491. 1.06 Soil ASTM D1557 Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Modified Effort (56,000 ft-lbf/ft3 (2,700 kN-m/m3)


1. Mohamad Akbar 2. Sateesh Babu 3. Anoop KG 4. Tyson Daniel

492. 1.11 Soil ASTM D1883 Standard Test Method for California Bearing Ratio (CBR) of Laboratory-Compacted Soils


1. Sateesh Babu 2. Anoop KG

493. 1.02 Soil ASTM D2216 Standard Test Methods for Laboratory Determination of Water (Moisture) Content of Soil and Rock by Mass


1. Aju John 2. Jestin Jose 3. Rishi Ram 4. Marlon Pandaan 5. Richard Dennis Asis


SN PWA Test No.

Category

Standard No. /

Method/ Issue Date


relevant section

Location / Facility


494. 1.13 Soil ASTM D2419 StandardTest Method for Sand Equivalent value of Soil and Fine Aggregates.


1. Jestin Jose 2. Aju Abraham John 3. Richard Dennis Asis

495. 1.05 Soil ASTM D4318 Standard Test Methods for Liquid Limit, Plastic limit, and Plasticity Index of Soils


1. Mohamad Akbar 2. Sateesh Babu 5. Anoop KG 4. Tyson Daniel

496. Soil ASTM D4373-14

Standard Test Method for Rapid Determination of Carbonate of Soils


1. Nikhil P-Max 2. Jordan Rotea 3. Annabel Ibisate

497. 1.12 Soil ASTM D4429 Standard Test Method for CBR (California Bearing Ratio) of Soils in Place


1. Ricardo Patam 2. Jestin Jose

498. 1.07 Soil ASTM D4718/D4718M

Standard Practice for Correction of Unit Weight and Water Content for Soils Containing Oversize Particles


1. Sateesh Babu 2. Anoop KG 3. Jestin Jose 4. Abdul Rafeeq 5. Binoy Thomas


SN PWA Test No.

Category

Standard No. /

Method/ Issue Date


relevant section

Location / Facility


499. 1.10 Soil ASTM D4944 Standard Test Method for Field Determination of Water (Moisture) Content of Soil by the Calcium Carbide Gas Pressure Tester


1. Ricardo Patam 2. Jestin Jose 3. Prasanth Sahajan

500. 1.03 Soil ASTM D6913 Standard Test Methods for Particle-Size Distribution (Gradation) of Soils Using Sieve Analysis


1. Anoop KG 2. Tyson Daniel 3. Manoj Gharti 4. Binoy Thomas 5. Bishnu Pageni 6. Annoop Pillai

501. 1.09 Soil ASTM D6938 Standard Test Methods for In-Place Density and Water Content of Soil and Soil-Aggregate by Nuclear Methods-Shallow Depth


1. Edwin Galang 2. Roberto Malanum 3. Ansar Babu 4. Roberto Malanum 5. Francis Ramada 6. Jojo Moreno

502. 1.99 Soil ASTM G200 Standard Test Method for Measurement of Oxidation reduction potential (ORP) of Soil




SN PWA Test No.

Category

Standard No. /

Method/ Issue Date


relevant section

Location / Facility


503. 1.14 Soil BS 1377 Part 2:1990

Soils for civil engineering purposes: Classification Tests Cl. 3.2 Determination of Moisture Content. Oven Drying method


1. Sateesh Babu 2. Tyson Daniel 3. Ajith Mapa 4. Bishnu Pangeni 5. Appu George

504. 1.05 Soil BS 1377 Part 2:1990

Soils for civil engineering purposes: Classification.Cl. 4.5 Casagrande apparatus method


1. Anoop KG 2.Tyson Daniel 3. Sateesh Babu 4. Mohamad Akbar 5. Rommel Manalo 6. Rommel Salvador 7. Bishnu Pangeni

505. 1.17 Soil BS -1377 Part 2:1990

Soils for civil engineering purposes: Classification Tests. Cl. 5 Determination of Plastic Limit and Plasticity index


1. Akbar Puthenveetil 2. Sateesh Babu 3. Muhammed Bilal 4. Prasanth Sahajan 5. Anoop KG 6. Manoj Gharti

506. 1.18 Soil BS -1377 Part 2:1990

Soils for civil engineering purposes: Classification Tests. Cl. 9.2 Sieve Analysis of soil By Wet sieving Method


1. Akbar Puthenveetil 2. Anoop KG


SN PWA Test No.

Category

Standard No. /

Method/ Issue Date


relevant section

Location / Facility


507. 1.19 Soil BS 1377 Part 2:1990

Soils for civil engineering purposes: Classification Test Cl. 9.3 Dry sieving method


1. Anoop KG 2. Tyson Daniel

508. 1.99 Soil BS 1377 Part 2:1990

Soils for civil engineering purposes: Classification Test Cl. 9.5 Sedimentation by the hydrometer method


1. Rishi Ram Battarai 2. Sateesh Babu 3. Tyson Daniel

509. 1.25 Soil BS 1377 Part 3:1990

Soils for civil engineering purposes: Chemical and Electro-chemical tests. Cl. 3 Determination of Organic Matter content


1. Kristofferson Cajano

510. 1.99 Soil BS 1377 Part 3:1990

Soils for civil engineering purposes: Chemical and Electro-chemical tests. Cl. 4 Determination of the mass loss of ignition




SN PWA Test No.

Category

Standard No. /

Method/ Issue Date


relevant section

Location / Facility


511. 1.29 Soil BS 1377 Part 3:1990

Soils for civil engineering purposes: Chemical and Electro-chemical tests. Cl. 5 Sub Cl. 5.2 Acid soluble suphate



512. 1.29 Soil BS 1377 Part 3:1990

Soils for civil engineering purposes: Chemical and Electro-chemical tests. Clause 5 Determination of the sulphate content of soil and ground water Sub Clause 5.2 Preparation of soil and its acid extract



513. 1.28 Soil BS 1377-3:1990

Soils for civil engineering purposes: Chemical and Electro-chemical tests. Cl. 5.3 Preparation of soil and its water extract




SN PWA Test No.

Category

Standard No. /

Method/ Issue Date


relevant section

Location / Facility


514. Soil BS 1377-3 Methods of test for soils for civil engineering purposes: acid soluble sulfate Clause 7.9


1. Nikhil Max 2. Lorenzo Bucasas 3. Annabel Ibisate

515. 1.99 Soil BS 1377 Part 3:1990

Soils for civil engineering purposes: Chemical and Electro-chemical tests. Cl. 9 Determination of the pH value



516. 1.20 Soil BS 1377 Part 4:1990

Soils for civil engineering purposes: Compaction related tests Cl. 3.5 Method using 4.5 kg rammer for soils with particles up to medium-gravel size


1. Akbar Puthenveetil 2. Anoop KG 3. Tyson Daniel 4. Geronimo Mateo 5. Binoy Thomas 6. Shabeel KP


SN PWA Test No.

Category

Standard No. /

Method/ Issue Date


relevant section

Location / Facility


517. 1.20 Soil BS 1377 Part 4:1990

Soils for civil engineering purposes: Compaction related tests. Cl. 3.6 Compaction related Test Method Using 4.5kg rammer


1. Akbar Puthenveetil 2. Anoop KG 3. Tyson Daniel 4. Geronimo Mateo 5. Binoy Thomas 6. Sansankha Dilum 7. Ricardo Ranches

518. 1.21 Soil BS 1377 Part 4:1990

Soils for civil engineering purposes: Compaction related tests. Cl. 7 Determination of California Bearing ratio.


1. Sateesh Babu 2. Akbar Puthenveetil 3. Anoop KG 4. Tyson Daniel 5. Binoy Thomas 6. Sotero Delacruz

519. 8.08 Soil BS 1377 Part 7:1990

Soils for civil engineering purposes: Shear Strength test (Total Stress). Cl. 4 Procedure 4.5.4 Determination of shear strength by direct shear (small shear box apparatus). Shearing: single stage tests


1. Sreejith S Kumar 2. Nidhish K.J. 3. Appu George


SN PWA Test No.

Category

Standard No. /

Method/ Issue Date


relevant section

Location / Facility


520. 1.22 Soil BS 1377-9:1990

Soils for civil engineering purposes: In Situ Tests - Cl. 2.1 Sand replacement method suitable for fine- and medium- grained soils (small pouring cylinder method


1. Binoy Thomas 2. Bhim Bahadur 3. Mohamad Shiji 4. Mohamad Akbar

521. 1.24 Soil BS 1377-9:1990

Soils for civil engineering purposes: In Situ Tests Cl. 2.5 Nuclear methods suitable for fine-, medium- and coarse- grained soils


1. Robert Malanum 2. Ansar Babu 3. Edwin Galang

522. 1.30 Soil BS EN 933-8:2012

Tests for geometrical properties of aggregates-Assessment of fines-Sand equivalent test


1. Richard Dennis Asis 2. Marlon Pandaan

523. 1.99 Soil BS EN 1744- 1:2009+A1:2012

Test for Chemical Properties of Aggregates Part 1: Chemical Analysis. Cl. 7 Determination of Water-Soluble Chloride salts using




SN PWA Test No.

Category

Standard No. /

Method/ Issue Date


relevant section

Location / Facility


the Volhard method (Reference Method)

524. 1.99 Soil BS EN 1744-1:2009+A1:2012

Test for Chemical Properties of Aggregates Part 1: Chemical Analysis. Cl. 10 Determination of Water-Soluble Sulfates



525. 1.99 Soil CML 10-97 Standard Method of Test for Determination of California Bearing Ratio


1. Mohamad Akbar 2. Annop KG 3. Tyson Daniel 4. Sateesh Babu

526. 1.99 Soil REF: QCS 2014 (Internal SOP)

Conductivity in Agricultural Soil (Saturation Extract)




SN PWA Test No.

Category

Standard No. /

Method/ Issue Date


relevant section

Location / Facility


527. 1.99 Soil REF: QCS 2014 (Internal SOP)

Electrical Conductivity in Compost (1:5 Soil-Water Extract)



528. 1.99 Soil REF: QCS 2014 / BS EN 1377 Part 3 (Internal SOP)

Chlorides in Agricultural Soil (Saturation Extract)




Chloride in Compost (1:5 Soil-Water Extract)




pH in Compost (1:5 Soil- Water Extract)




SN PWA Test No.

Category

Standard No. /

Method/ Issue Date


relevant section

Location / Facility



Sulphates in Agricultural Soil (Saturation Extract)



532. Soil Soil chemical methods- Australasia 2AI.2BI

Soil Chemical Methods- Australasia 2AI.2BI

Street No.2 Wet Chemistry

1. Nikhil Max 2. Lorenzo Bucasas 3. Annabel Ibisate

533. 1.99 Soil Soil Chemical Methods-Australasia

Electrical Conductivity in Agricutural Soil (Saturation Extract) 14B1


1. Nikhil P. Max 2. Jordan Rotea 3. Annabel Ibisate 4. Catherine Felonia 5. Lorenzo Bucasas


pH in Agricutural Soil (Saturation Extract) 14C1




Chlorides in Agricutural Soil (Saturation Extract) 14E1




SN PWA Test No.

Category

Standard No. /

Method/ Issue Date


relevant section

Location / Facility



Sulphates in Aggricutural Soil (Saturation Extract) 14F3



537. 1.99 Soil US EPA Method 5035

US EPA – Methods for Chemical Analysis of Water and Wastes Closed-System Purge-And-Trap And Extraction For Volatile Organics In Soil And Waste Samples/ 8260 C Volatile Organic Compounds By Gas Chromatography/ Mass Spectrometry (GC/MS)



538. 1.99 Soil US EPA Method 9030B

US EPA - Methods For Chemical Analysis of Water and Wastes Method 9030B Acid-Soluble And Acid-Insoluble Sulfides: Distillation




SN PWA Test No.

Category

Standard No. /

Method/ Issue Date


relevant section

Location / Facility



US EPA - Methods For Chemical Analysis of Water and Wastes Method 9034 Titrimetric Procedure For Acid- Soluble And Acid Insoluble Sulfides



540. 1.99 Soil US EPA Method 9045D

US EPA - Methods For Chemical Analysis of Water and Wastes Method 9045D Soil and Waste pH




Cation-Exchange Capacity of Soil (Ammonium Acetate)



542. 7.99 Steel ASTM E415-15

Standard Test Method for Analysis of Carbon and Low - Alloy Steel by spark Atomic Emission Spectrometry

Street No. 2 Steel Lab

1. Kristofferson Cajano 2. Nikhil Max 3. Jordan Rotea 4. Lorenzo Bucasas


SN PWA Test No.

Category

Standard No. /

Method/ Issue Date


relevant section

Location / Facility


543. 7.40 Steel BS 4449 2005+A2:09/BS EN ISO 6892-1:09/BS EN 15630-1-10

Tensile, Yield & Elongation of Reinforcement steel Bar/Rebend @20°


1. Nilam Khadka 2. Rian Gagasa

544. 7.30 Steel BS 4449 2005+A2:09/BS EN ISO 6892-1:09/BS EN 15630-1-10

Tensile, Yield & Elongation of Reinforcement steel Bar/Bend @90°



545. 7.10 Steel BS EN 10002-1:2001

Tensile testing of metallic materials. Method of test at ambient temperature



546. Swimming Pool Water

HACH Method 8016 (Low and High Range)

Bromine Street 2 Environmental

1. Deepu J. Arackal

547. Swimming Pool Water

HACH Method 8139

Cyanuric Acid Street 2 Environmental

1. Deepu J. Arackal


SN PWA Test No.

Category

Standard No. /

Method/ Issue Date


relevant section

Location / Facility


548. 6.30 Tack Coat/Prime

Coat

ASTM D2995 Standard Practice for Estimating Application Rate and Residual Application Rate of Bituminous Distributors


1. Manoj Gharti 2. Annaliza Caballero 3. Sasanka Dilum

549.

Transformer Oil

ASTM D4059 Standard Test Method for Analysis of Polychlorinated Biphenyls in Insulating Liquids by Gas Chromatography (ASTM D4059-00 2010)


1. Theresa Sayo 2. Sajeev Yohannan

550.

Transformer Oil

ASTM D5185-18

Multielement Determination of Used and Unused Lubricating Oils and Base Oils by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)1



551.

Transformer Oil

IEC 60666:2010

Detection and determination of specified additives in mineral insulating oils (Passivator contents




SN PWA Test No.

Category

Standard No. /

Method/ Issue Date


relevant section

Location / Facility


and Inhibitor content)

552.

Transformer Oil

IEC 61125-2018

Test methods for oxidation stability - Test method for evaluating the oxidation stability of insulating liquids in the delivered state



553.

Transformer Oil

IEC 61619-1997

Insulating liquids - Contamination by polychlorinated biphenyls (PCBs) - Method of determination by capillary column gas chromatography



554.

Transformer Oil

IEC 62697-1: 2012

Test method for quantitative determination of dibenzyldisulfide (DBDS)



555.

Transformer Oil

US EPA Method 8082A

US EPA - Methods For Chemical Analysis of Water and Wastes Polychlorinated




SN PWA Test No.

Category

Standard No. /

Method/ Issue Date


relevant section

Location / Facility


Biphenyls (PCBs) by Gas Chromatography

Site Lab 4 – QD SBG St. No. 13, Gate 112, Salwa Industrial Area, P.O. Box 4024, Doha, Qatar

Site Contact: Thomas Varghese Effective Date of Scope: April 19, 2019

Accreditation Standard: ISO/IEC 17025: 2005

SN PWA Test No.

Category

Standard No. /

Method/ Issue Date


relevant section

Location / Facility


556. 2.04 Aggregate ASTM C117-13

Material finer than 0.075mm (No.200) Sieve in Mineral Aggregates. Procedure A

Site Lab 4 - QD SBG

1. Jeffrey Cruz 2. Aju Abraham John 3. Jestin Jose


Standard Test Method for Density, Relative density, (Specific Gravity) and Absorption of Coarse Aggregates.

Site Lab 4 - QD SBG



SN PWA Test No.

Category

Standard No. /

Method/ Issue Date


relevant section

Location / Facility



Density, Relative Density, and Absorption of Fine Aggregate

Site Lab 4 - QD SBG



Standard Test Method for Sieve Analysis of Fine and Coarse Aggregates.

Site Lab 4 - QD SBG

1. Jeffrey Cruz 2. Aju Abraham John 3. Jestin Jose 4. Ricardo Patam 5. Dennis Asis

560. 2.07 Aggregate ASTM C142/ C142M-17

Standard Test Method for Clay Lumps and Friable Particles in Aggregates

Site Lab 4 - QD SBG


561. 2.01 Aggregate ASTM D75/ D75M


Site Lab 4 - QD SBG


562. Aggregate ASTM D702/ D702M

Standard Practice for Reducing Samples of Aggregate to Testing Size

Site Lab 4 - QD SBG

1. Jeffrey Cruz 2. Aju John 3. Jestin Jose 4. Rishi Ram 5. Marlon Pandaan 6. Richard Dennis Asis

563. 1.13 Aggregate ASTM D2419-14

Standard Test Method for Sand Equivalent value of Soil and Fine Aggregates

Site Lab 4 - QD SBG

1. Jeffrey Cruz 2. Jestin Jose 3. Aju Abraham John 4. Richard Dennis Asis


SN PWA Test No.

Category

Standard No. /

Method/ Issue Date


relevant section

Location / Facility



Liquid Limit, Plastic limit, and Plasticity Index of Soils

Site Lab 4 - QD SBG

1. Jeffrey Cruz 2. Mohamad Akbar 3. Sateesh Babu 4. Anoop KG 5. Tyson Daniel


Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate

Site Lab 4 - QD SBG

1. Jeffrey Cruz 2. Aju Abraham John 3. Jestin Jose 4. Rishi Ram 5. Marlon Pandaan


Standard Test Method for Determining the Percentage of Fractured Particles in Coarse Aggregate

Site Lab 4 - QD SBG

1. Jeffrey Cruz 2. Aju John 3. Jestin Jose 4. Rishi Ram 5. Marlon Pandaan 6. Richard Dennis Asis

567. 2.17 Aggregate BS 812 Part 102

Testing aggregates Part 102. Methods for sampling

Site Lab 4 - QD SBG


568. 2.24 Aggregate BS 812-103.1

Testing Aggregates Methods for the determination of Particles Size Distribution

Site Lab 4 - QD SBG



SN PWA Test No.

Category

Standard No. /

Method/ Issue Date


relevant section

Location / Facility


569. 2.18 Aggregate BS 812 - Part 109

Methods for determination of moisture content

Site Lab 4 - QD SBG


570. 2.35 Aggregate BS 812 - Part 112

Testing aggregates Part 112. Methods for determination of aggregate impact value (AIV)

Site Lab 4 - QD SBG


571. Aggregate BS EN 933 - Part 1

Test for Geometrical Properties of Aggregates, Determination of Particle size distribution

Site Lab 4 - QD SBG


572. 2.29 Aggregate BS EN 933 - Part 3

Test for Geometrical Properties of Aggregates, Determination of Flakiness Index of Aggregates

Site Lab 4 - QD SBG


573. 2.28 Aggregate BS EN 933-7 Tests for geometrical properties of aggregates - Determination of shell content - Percentage of shells in coarse aggregates

Site Lab 4 - QD SBG



SN PWA Test No.

Category

Standard No. /

Method/ Issue Date


relevant section

Location / Facility


574. 1.30 Aggregate BS EN 933-8 Tests for geometrical properties of aggregates Part 8: Assessment of fines — Sand equivalent test BS EN 933-8

Site Lab 4 - QD SBG

1. Jeffrey Cruz 2. Richard Dennis Asis 3. Marlon Pandaan

575. Asphalt AASHTO R-47

Reducing Samples of Hot Mix Asphalt (HMA) to Testing Size

Site Lab 4 - QD SBG

1. Victor Reyes 2. Supun Indhushan 3. Akilan Thiraviyalingam 4. Sasanka Dilum 5. Analiza Caballero

576. 2.04 Asphalt ASTM C117-13

Standard Test Method for Materials Finer than 75-μm (No. 200) Sieve in Mineral Aggregates by Washing

Site Lab 4 - QD SBG

1. Aju Abraham John 2. Jestin Jose

577. 2.03 Asphalt ASTM C136 Sieve Analysis of Fine and Coarse Aggregates

Site Lab 4 - QD SBG

1. Aju Abraham John 2. Jestin Jose 3. Ricardo Patam 4. Dennis Asis

578. 6.22 Asphalt ASTM D979/ D979M-15 (with ASTM D3665-12)

Standard Practice for Sampling Bituminous Paving Mixtures

Site Lab 4 - QD SBG

1. Sheldon Marquez 2. Mohammed Ibrahim 3. Joemarie Grandecela 4. Supun Indhushan 5. Jestin Jose


SN PWA Test No.

Category

Standard No. /

Method/ Issue Date


relevant section

Location / Facility


579. 6.26 Asphalt ASTM D1188-07

Bulk Specific Gravity and density of Compacted Bituminous Mixtures using Coated samples.

Site Lab 4 - QD SBG


580. 6.27 Asphalt ASTM D2041/ D2041M-11

Standards Test Method for Theoretical Maximum Specific Gravity and Density of Bituminous Paving Mixture Procedure 9.5.1 (Weighing inwater)

Site Lab 4 - QD SBG


581. 6.32 Asphalt ASTM D2172/ D 2172M-11

Quantitative Extraction of Bitumen from Bituminous Paving Mixtures Clause - 11.6.1 Ashing Method

Site Lab 4 - QD SBG

1. Felipe Suba 2. Mark Lenon 3. Akilan Thiraviyalingan 4. Ruwan Dewayalage 5. Jeffrey Cruz 6. Sasanka Dilum

582. 6.25 Asphalt ASTM D2726/ D2726M-14

Standard Test Method for Bulk Specific Gravity and Density of Non Absorptive Compacted Bituminous Mixtures

Site Lab 4 - QD SBG

1. Sasanka Dilum 2. Manoj Gharti 3. Joe marie Grandecella 4. Akilan Thiraviyalingam


SN PWA Test No.

Category

Standard No. /

Method/ Issue Date


relevant section

Location / Facility


5. Lalana Sandaruwan 6. Supun Indhushan

583. 6.03 Asphalt ASTM D2995-11

Standard Practice for Estimating Application Rate of Bituminous Distributors

Site Lab 4 - QD SBG

1. Felipe Suba 2. Manoj Gharti 3. Sasanka Dilum 4. Rishi Ram 5. Jestin Jose 6. John Borja

584. Asphalt ASTM D3203/ D3203M

Standard Test Method for Percent Air Voids in Compacted Asphalt Mixtures

Site Lab 4 - QD SBG

1. Felipe Suba 2. Sasanka Dilum 3. Manoj Gharti 4. Joe marie Grandecella 5. Akilan Thiraviyalingam 6. Lalana Sandaruwan

585. 6.29 Asphalt ASTM D3549/ D3549M-11

Thickness or Height of Compacted Bituminous Paving Mixture Specimens

Site Lab 4 - QD SBG

1. Felipe Suba 2. Sasanka Dilum 3. Manoj Gharti 4. Joe marie Grandecella 5. Akilan Thiraviyalingam 6. Lalana Sandaruwan


SN PWA Test No.

Category

Standard No. /

Method/ Issue Date


relevant section

Location / Facility


586. 6.23 Asphalt ASTM D5361/ D5361M-14

Standard Practice for Sampling Compacted Bituminous Mixtures for Laboratory Testing

Site Lab 4 - QD SBG

1. Jestin Jose 2. Supun Indhushan 3. Manoj Gahrti 4. Richard Camacho 5. Analiza Caballero

587. 6.34 Asphalt ASTM D5444 Mechanical Size Analysis of Extracted Aggregate

Site Lab 4 - QD SBG

1. Felipe Suba 2. Sasanka Dilum 3. Akilan Thiraviyalingan 4. Ruwan Dewayalage 5. Jeffrey Cruz

588. 6.24 Asphalt ASTM D6926 Preparation of Bituminous Specimens using Marshall apparatus

Site Lab 4 - QD SBG

1. Felipe Suba 2. Sasanka Dilum 3. John Borja 4. Manoj Gahrti 5. Victor Reyes 6. Rommel Salvador

589. 6.30 Asphalt ASTM D6927 Standard Test Method for Marshall Stability and Flow of Bituminous Mixtures

Site Lab 4 - QD SBG


590. 6.56 Asphalt BS EN 12697- 13

Bituminous mixtures-Test Methods for Hot Mix Asphalt- Temperature measurement

Site Lab 4 - QD SBG



SN PWA Test No.

Category

Standard No. /

Method/ Issue Date


relevant section

Location / Facility


591. 3.03 Concrete ASTM C1064/ C1064M-12

Temperature of Freshly Mixed Hydraulic Cement Concrete

Site Lab 4 - QD SBG

1. Mark Camama 2. Rishi Ram 3. Priyantha Kumara 4. M. Navaraja 5. Jestin Jose 6. Rommel Manalo 7. Nidish Jayadevan 8. Nilam Khadka 9. Geraldo Arrellano 10. Romarico Munsayac

592. 3.21 Concrete BS EN 12350-1

Testing fresh concrete- Sampling

Site Lab 4 - QD SBG

1. Mark Camama 2. Rishi Ram 3. Priyantha Kumara 4. M. Navaraja 5. Marlon Pandaan 6. Majula Udayanga 7. John Borja 8. Gerardo Pascua 9. Nilam Khadka 10. Jestin Jose 11. Ricardo Patam

593. 3.23 Concrete BS EN 12350-2

Testing fresh concrete- Slump Test

Site Lab 4 - QD SBG

1. Mark Camama 2. Rishi Ram 3. Priyantha Kumara 4. M. Navaraja 5. Marlon Pandaan 6. Majula Udayanga 7. John Borja 8. Gerardo Pascua


SN PWA Test No.

Category

Standard No. /

Method/ Issue Date


relevant section

Location / Facility


9. Nilam Khadka 10. Jestin Jose 11. Ricardo Patam

594. 3.25 Concrete BS EN 12390-1

Testing of hardened Concrete Shape, Dimension and other requirement for Specimens and molds

Site Lab 4 - QD SBG

1. Navaraja M. 2. Michel Millado 3. Satheesh Babu 4. Lijo Thomas 5. Ricardo Ranches 6. Anoop Ashoka

595. 3.22 Concrete BS EN 12390-2

Testing hardened concrete- Making and curing specimens for strength tests

Site Lab 4 - QD SBG

1. Mark Camama 2. Rishi Ram 3. Priyantha Kumara 4. M. Navaraja 5. Marlon Pandaan 6. Majula Udayanga 7. John Borja 8. Gerardo Pascua 9. Nilam Khadka

596. 3.26 Concrete BS EN 12390-3

Testing of hardened Concrete Compressive Strength test of Concrete Specimen

Site Lab 4 - QD SBG

1. Navaraja M. 2. Satheesh Babu 3. Lijo Thomas 4. Ricardo Ranches 5. Anoop Ashoka 6. Chulaka Kasun

597. 3.27 Concrete BS EN 12390-7

Testing of hardened Concrete Density test of Concrete Specimen

Site Lab 4 - QD SBG

1. Navaraja M. 2. Satheesh Babu 3. Lijo Thomas 4. Ricardo Ranches


SN PWA Test No.

Category

Standard No. /

Method/ Issue Date


relevant section

Location / Facility


5. Anoop Ashoka 6. Chulaka Kasun

598. 3.28 Concrete BS EN 12504-1

Testing concrete in structures-Cored specimens- Taking, examining and testing in compression

Site Lab 4 - QD SBG

1. Kack Chanaka 2. Navaraja M. 3. Girish Pillai 4. Prasanth Sahajan 5. Rajeev Mathew

599. Soils AASHTO T84 Specific Gravity and Absorption of Fine Aggregate

Site Lab 4 - QD SBG

1. Ajith Mapa 2. Binoy Thomas

600. 2.16 Soils AASHTO T304

Standard Test Method for Uncompacted Void Content of Fine Aggregate

Site Lab 4 - QD SBG

1. Ajith Mapa 2. Binoy Thomas 3. Tyson Daniel

601. 2.06 Soils ASTM C127-15

Standard Test Method for Density, Relative density, (Specific Gravity) and Absorption of Coarse Aggregates

Site Lab 4 - QD SBG

1. Ajith Mapa 2. Binoy Thomas 3. Aju Abraham John 4. Jestin Jose

602. 2.01 Soils ASTM D75/ D75M


Site Lab 4 - QD SBG

1. Ajith Mapa 2. Binoy Thomas 3. Aju Abraham John 4. Jestin Jose


SN PWA Test No.

Category

Standard No. /

Method/ Issue Date


relevant section

Location / Facility


603. Soils ASTM D854-14

Standard Test Method for Specific Gravity of Soil Solids by Water Pycnometer

Site Lab 4 - QD SBG

1. Ajith Mapa 2. Binoy Thomas 3. Geronimo Mateo 4. Ricardo Ranches 5. Chulaka kasun 6. Tyson Daniel 7. Anoop K G

604. 1.06 Soils ASTM D1557-12

Laboratory Compaction Characteristics of Soil Using Modified Effort

Site Lab 4 - QD SBG

1. Ajith Mapa 2. Binoy Thomas 3. Ricardo Ranches 4. Chulaka Wijesuriya 5. Satheesh Babu 6. Rommel Salvador 7. Nidish Kallayil 8. Ricardo Patam 9. Manoj Gharti

605. 1.11 Soils ASTM D1883-14

Standard Test Method for California Bearing Ratio (CBR) of Laboratory- Compacted Soils

Site Lab 4 - QD SBG

1. Ajith Mapa 2. Binoy Thomas 3. Rommel Manalo 4. Ricardo Patam 5. Chindu Surendran 6. Rishi Ram 7. Manoj Gahrti

606. 1.02 Soils ASTM D2216-10

Standard Test Methods for Laboratory Determination of Water (Moisture)

Site Lab 4 - QD SBG

1. Ajith Mapa 2. Binoy Thomas 3. Jestin Jose 4. Richard Dennis Asis 5. Marlon Pandaan


SN PWA Test No.

Category

Standard No. /

Method/ Issue Date


relevant section

Location / Facility


Content of Soil and Rock by Mass

6. Satheesh Babu 7. Aju John

607. 1.13 Soils ASTM D2419-14

Standard Test Method for Sand Equivalent value of Soil and Fine Aggregates

Site Lab 4 - QD SBG

1. Ajith Mapa 2. Binoy Thomas 3. Sotero Delacruz 4. Richard Dennis 5. Ricardo Patam 6. Marlon Pandaan 7. Rommel Manalo

608. Soils ASTM D3665 Standard Practice for Random Sampling of Construction Materials

Site Lab 4 - QD SBG

1. Ajith Mapa 2. Binoy Thomas

609. 1.05 Soils ASTM D4318 Liquid Limit, Plastic limit, and Plasticity Index of Soils

Site Lab 4 - QD SBG

1. Ajith Mapa 2. Binoy Thomas 3. Akbar Puthanveetil 4. Richard Dennis Asis 5. Rommel Salvador 6. Anoop KG

610. Soils ASTM D4718 Correction of Unit Weight and Water Content for Soils Containing Oversize Particles

Site Lab 4 - QD SBG

1. Ajith Mapa 2. Binoy Thomas 3. Ricardo Ranches 4. Chulaka Wijesuriya 5. Satheesh Babu 6. Rommel Salvador 7. Nidish Kallayil


SN PWA Test No.

Category

Standard No. /

Method/ Issue Date


relevant section

Location / Facility


611. 2.10 Soils ASTM D4791-10

Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate

Site Lab 4 - QD SBG

1. Ajith Mapa 2. Binoy Thomas 3. Aju Abraham John 4. Jestin Jose 5. Rishi Ram 6. Marlon Pandaan

612. 2.14 Soils ASTM D5821 Standard Test Method for Determining the Percentage of Fractured Particles in Coarse Aggregate

Site Lab 4 - QD SBG

1. Ajith Mapa 2. Binoy Thomas 3. Aju John 4. Jestin Jose 5. Rishi Ram 6. Marlon Pandaan 7. Richard Dennis Asis

613. 1.09 Soils ASTM D6938-17

In-Place Density and Water Content of Soil and Soil-Aggregate by Nuclear Methods (Shallow Depth)

Site Lab 4 - QD SBG

1. Dhaneesh TR 2. Richie dela Cruz 3. Bhim Bahadur 4. Ansar Babu 5. Roberto Malanum 6. Francis Ramada 7. Edwin Galang 8. Roberto Malanum

614. 2.24 Soils BS 812-Part 103.1: Test 7.2

Methods for the determination of Particle Size Distribution - Sieve test

Site Lab 4 - QD SBG

1. Ajith Mapa 2. Binoy Thomas 3. Aju Abraham John 4. Jestin Jose 5. Ricardo Patam 6. Dennis Asis


SN PWA Test No.

Category

Standard No. /

Method/ Issue Date


relevant section

Location / Facility


615. 1.14 Soils BS 1377 Part -2

Soils for civil engineering purposes: Classification Tests - Determination of Moisture Content - Test 3.2 Oven Drying method

Site Lab 4 - QD SBG

1. Ajith Mapa 2. Binoy Thomas 3. Bishnu Pangeni 4. Appu George 5. Tyson Daniel 6. Muhammed Bilal 7. John Borja 8. Rommel Manalo

616. 1.16 Soils BS 1377 Part 2

Soils for civil engineering purposes: Classification Tests. Test 4.5 – Determination of Liquid Limit

Site Lab 4 - QD SBG

1. Ajith Mapa 2. Binoy Thomas 3. Anoop KG 4. Tyson Daniel 5. Sateesh Babu 6. Mohamad Akbar

617. 1.17 Soils BS 1377 Part 2

Soils for civil engineering purposes: Classification Tests. Test 5– Determination of Plastic Limit and Plasticity index

Site Lab 4 - QD SBG

1. Ajith Mapa 2. Binoy Thomas 3. Muhammed Bilal 4. Prasanth sahajan 5. Anoop K G 6. Manoj gharti 7. Sotero Delacuz 8. Geronimo Mateo

618. 1.18 Soils BS 1377 Part 2

Soils for civil engineering purposes: Classification Tests. Test 9.2 Sieve

Site Lab 4 - QD SBG

1. Ajith Mapa 2. Binoy Thomas 3. Muhammed Bilal 4. John Borja 5. Abdul Rafeeq


SN PWA Test No.

Category

Standard No. /

Method/ Issue Date


relevant section

Location / Facility


Analysis of soil By Wet sieving Method

6. Rommel Manalo 7. Sasankha Dilum

619. 1.20 Soils BS 1377 Part 4

Soils for civil engineering purposes: Compaction related tests. Test 3.6 –Compaction related Test Method Using 4.5kg rammer

Site Lab 4 - QD SBG

1. Ajith Mapa 2. Binoy Thomas 3. Muhammed Bilal 4. John Borja 5. Chindu Surendra 6. Anoop K G 7. Manoj Gharti 8. Nidish Jayadevan

620. 1.21 Soils BS 1377 Part 4

Soils for civil engineering purposes: Compaction related tests. Test 7.0 – California Bearing Ratio

Site Lab 4 - QD SBG

1. Ajith Mapa 2. Binoy Thomas 3. Anoop KG 4. Gangaram Bhattari 5. Geronimo Mateo 6. Abdul Rafeeq 7. Rommel Manalo 8. Akbar Puthanveetil

621. 1.24 Soils BS 1377-9 Soils for civil engineering purposes: In Situ Tests Test 2.5- Nuclear methods suitable for fine-, medium- and coarse-grained soils

Site Lab 4 - QD SBG

1. Dhaneesh TR 2. Richie dela Cruz 3. Bhim Bahadur 4. Ansar Babu 5. Jojo Moreno 6. Roberto Malanum 7. Francis Ramada 8. Edwin Galang 9. Roberto Malanum

gulf laboratories co. w.l.l. · shabeek k v . 6. sotero delacruz . 7. 2.99 aggregates aashto t -...

Documents