guide to setting up the tripod

5
Guide to setting up the Tripod Step one – Take your tripod out of the carry case and place down.

Upload: travette

Post on 07-Dec-2015

17 views

Category:

Documents


0 download

DESCRIPTION

.....

TRANSCRIPT

Page 1: Guide to Setting Up the Tripod

Guide to setting up the Tripod

Step one – Take your tripod out of the carry case and place down.

Page 2: Guide to Setting Up the Tripod

Step two – Adjust the tripod legs to your desired height and tighten the screws or clips to keep it in place.

Page 3: Guide to Setting Up the Tripod

Step three – Adjust the spirit level until it is completely centred in the circle to do this you must unscrew the handle beneath where the camera is placed and move it around until it is centred then

tighten the handle to keep it in place.

Step four – Press the red button on the side off the camera plate and slide off the clip which holds the camera on the plate. Then screw the clip onto the camera and slide it back onto the top of the

tripod.

Page 4: Guide to Setting Up the Tripod

Step five – After following all of these steps you can start recording.