gtc-1000ex · gtc-1000ex 100t telescopic boom crawler crane general data crane capacity 100t at...

GTC-1000EX100t Telescopic Boom Crawler Crane

GENERAL DATACRANE CAPACITY 100t at 2.5mBOOM 4-section,

12.8 m – 39.0 mDIMENSIONOverall Length 16.47 mOverall Width (tracks extended) 6.44 mOverall Width (tracks retracted) 3.94 mOverall Width (tracks removed) 3.24 mOverall Height 4.35 mMASSGross Vehicle Mass (Standard Equipment Package)

91,762 kg

PERFORMANCETravel Speed 0.7 km/h – 2.0 km/hGradability 60%

CRANE SPECIFICATIONMODELGTC-1000EX

CAPACITY100t at 2.5m

BOOM4-section full power synchronized telescoping boom. Synchronized telescoping system consists of two double acting hydraulic cylinders with load holding valves and extension and retraction cables. •RetractedLength:12.8m •ExtendedLength: 39.0 m •ExtensionTime:116s •ElevatingAngles:-1°to80° •ElevatingTime: 74 s •BoomHead:Seven,559mmdiametercastnylonsheaves

on heavy-duty roller bearings. (5 load bearing and 2 lead in sheaves)

AUXILIARY BOOM HEADQuick reeve, single 559 mm diameter high-strength, cast nylon sheave mounted on a heavy-duty roller bearing. •HookBlock:90thookblock-Five508mmdiametersheaves

mounted on heavy duty roller bearings with swivel hook and safety latch.

•HeadacheBall:11tballincludesaswivelhookwithasafetylatch

COUNTERWEIGHT Total 16,100 kg (one piece 8,200 kg, one piece 7,900 kg)

WINCHESPlanetary geared two-speed winch includes a bent axis hydraulic motor, multi-disc internal brake and counterbalance valve. Drum rotation indicator is included (complete winch performance specs on Page 3) •Main Winch -RopeDiameterandLength:22mmx229m - Singlelinepull:106.8kN(firstlayer) - Singlelinespeed:97.2m/min(4thlayer) •Auxiliary Winch - RopeDiameterandLength:22mmx167m - Singlelinepull:83.2kN(firstlayer) - Singlelinespeed:123.4m/min(atthe4thlayer)

TRAVEL Each side frame contains a pilot controlled, two-speed track drive with hydraulic axial piston motor and parking brake. Travel system provides skid steering and counter rotation. •Lowtravelspeed:0.7km/h •Hightravelspeed:2.0km/h •Gradeability(unladen):60%

SWINGGear motor driving a planetary gear reducer with a shaft mounted pinion, external gear shear ball slew bearing bolted to the superstructure and the carbody allows the superstructure to rotate 360°.Dualmodeswing,lock/freeswingselectable. •SwingSpeed:0-2rpm •SwingParkingBrake:Springappliedfailsafebrakewithhydraulic

release that is controlled from the operators cab •SwingServiceBrake:Hydraulicallyapplied,controlledthrough

foot actuated pedal •HouseLockSystem:2-position,manuallypinned

LOAD MOMENT INDICATORTADANOAML-CRatedCapacityLimiterandAnti-TwoBlocksystem •Control function shutdown. Audible and visual warnings •LCD screen provides a continuous display of working boom

length, boom angle, working load radius, tip height, parts-of-line(operatorset),machinetrackconfiguration,relativeloadmoment, maximum permissible load and actual load.

•Anti-two block weight allows quick reeving of hook block

FRAMEThe frame is an all-steel, welded structure, precision machined to accept attachment of the boom and swing components.

SPECIFICATION SHEET NO. 489-07/12 AS

2

GTC-1000EX100t Telescopic Boom Crawler Crane SPECIFICATION SHEET NO. 489-07/12 AS

OPERATORS CABFully-enclosed,airconditionedall-steelmodularcabwithlockableswingingdoor,acousticallining,anti-slipfloorandtintedsafetyglass. •Cabtilts20°. •Rearviewcamerasareappropriatelylocatedasarethreeremote

control work lights. •Vent window in the rear of the cab. •Grab bars and steps are located for easy access to the cab. •Defroster, heater, circulating fan •2-speed windshield wiper, top glass wiper •Six-way adjustable fabric seat with headrest, seat belt •Dome light •Dry-chemicalfireextinguisher •Four-wayelectronicarmrestmountedjoystickscontrolswing,

boom extend, main winch, auxiliary winch and boom hoist. Electronic foot pedals control the travel and swing service brake functions.

•Seat and armrest termination switches immediately disable all hydraulic functions as the operator rises from the seat or lifts the left hand armrest.

Dashinstrumentation:tachometer,voltmeter,oilpressuregauge,temperature gauge, hour meter and fuel gauge. Indicators are providedforcranelevel,loadmoment,drumrotation,airfilterrestriction,hydraulicoiltemperatureandfilterrestriction,engineoilpressure and temperature.

ENGINE •Make/Model:CumminsQSM11 •Type:6Cylinder,Watercooled,4Cycle •Aspiration: Turbocharged and Aftercooled •Max.Output:280kw(375hp)@2100RPM •MaxTorque: 1,898Nm@1400RPM •PistonDisp:10.8liter •BorexStroke:107mmx124mm •EmissionCert:U.S.EPATier3,EuromotStageIIIA •Alternator:130amp

ELECTRICAL SYSTEM12 VDC

FUEL SYSTEM •Capacity:625liter •Filtration:Inlinefuel/waterseparatorandenginemountedfuel

filter

SIDE FRAMESTwo welded steel side frames are paired with a track group. The side frames extend and retract hydraulically and are controlled from the cab. •TrackRollers: Two top and thirteen bottom sealed rollers on each

trackframeIdler:Oilfilled,selflubricatingwithhydraulictypetensioner

•TrackShoes: 900 mm, 3-bar semi grouser

HYDRAULIC SYSTEM •HydraulicPumps:Twohighpressure,variableaxialpistonpumps

with load sense and power limiting control for crane functions. One variable axial piston pump for cooling loop

•DirectionalValves:Multiplepressureandflowcompensatedvalves with integrated relief valves controlled by hydraulic pilot signals.

•Pumpoutput:795l/[email protected] pressure

•Reservoir:1,400litercapacity,spin-onfiller/breather,sightgauge, cleanout, and sump drain.

•Filtration:5micron,fullflowtankmountedreturnfilterswithelectricalcloggingindicator.5micronpilotoilin-linepressurefilter

•Diagnostic Ports:Provided for system, load sense, and pilot pressure

OPTIONAL EQUIPMENT •BoomExtension:Latticetype,swingaway - Length:10.7m - Head:Two,559mmdiametercastnylonsheavesonheavy-

duty roller bearings - Max.LiftingHeight:50.9m •BoomJib:Latticetype,swingaway,storesalongboomextension - Length:7.6m - OffsetAngles:15°&30° - Max.LiftingHeight: 58.4 m •63thookblock-Three508mmsteelsheaves,swivelhook&

safety latch •AugerReadyPackage:Includeshoses,fastenersandstowage

bracket assembly mounted to the base section of the boom with aflowcapabilityof130l/min

•CompleteAugerPackage:Addsatwospeedaugermotor/gearboxandone1.52mkellybartotheAugerReadyPackage.

•ToolCircuit:Provides23l/minand45l/minat176barthrougha15.2mtwinhosereelwithquickdisconnectfittingstooperateopen center tools.

•FreeFallHoists:Winchesareavailableincontrolledfreefallconfigurations.

•ColdWeatherPackages:Coldweatheroptionsareavailableforoperationto-40°C(Consultfactoryforapplicationsupport)

•Radiocontrolpackage. •Rotationresistantwirerope. •3-Color Light bar for external load indication •100thookblock-Five508mmsteelsheaves,mountedonheavy-

dutyrollerbearingswithswivelhook&safetylatch •Boltonflattrackshoes

3


Machine Weights KGSTANDARDCRANEWITH4SECTION39.0mBOOM,2PIECECOUNTERWEIGHT& 900mmTRACKSHOES 87,537

POWeR Unit:CraneLessCounterweightandTrackFrames 45,699Counterweight,2pieces[1piece@8,200kgand1piece@7,900kg] 16,100TrackFrames,2pieces[each12,927kg] 25,854AuxiliaryWinchwithStandardRope 1,180AuxiliaryNoseSheave 11311t Headache Ball 27090t Hook Block 1,134

OPtiOnaL eQUiPMent KG10.7 m Lattice Extension 1,1547.6mJib(connectstoheadofLatticeExtensionONLY) 379AugerReadyPackage 200Complete Auger Package 6901.52m Kelly Bar 50

* Deduction from Standard Crane Weight

Main WinchPlanetary geared two-speed winch includes a bent axis, variable displacement hydraulic motor and a multi-disc internal brake.

WireRope:229m,22mm35x7,RotationResistant.Linepullsarenotbasedonwireropestrength.

RopeLayer Maximum Line Pull(kN)NoLoadLineSpeed (m/min)

FullLoadLineSpeed (m/min)

Pitch Diameter (mm) Layer (m) Total (m)

1 106.8 72.5 38.1 477.5 40.5 40.52 97.6 79.2 41.8 524.0 44.2 84.73 90.0 86.0 45.1 568.5 47.9 132.64 83.5 92.7 48.8 612.9 51.5 184.15 77.8 99.4 52.4 657.4 55.5 239.66 72.9 106.1 55.8 701.8 59.1 298.77 68.6 131.1 59.4 686.4 57.5 342.88 64.7 119.5 62.8 790 66.4 428.2

aUxiLiaRy hOistPlanetary geared two-speed winch includes a bent axis, variable displacement hydraulic motor and a multi-disc internal brake.

WireRope:167m22mm,35x7,RotationResistant.Linepullsarenotbasedonwireropestrength.

RopeLayer Maximum Line Pull(kN)NoLoadLineSpeed (m/min)

FullLoadLineSpeed (m/min)

Pitch Diameter (mm) Layer (m) Total (m)

1 83.2 105.8 49.4 426.7 35.7 35.72 76.2 113.4 53 447 37.5 73.23 70.2 118.6 55.2 464.8 38.9 112.14 65.2 123.4 57.6 485.1 40.6 152.85 60.8 131.1 61 505.5 42.3 195.16 56.9 133.5 62.2 525.8 44 239.2

Specificationsaresubjecttochangewithoutpriornotice.

4


DIMENSIONS

Widths, Weights, and gROUnd PRessURes*

Shoe Width

Overall WidthArea Ground Pressure

Working WeightRetracted Extended

900 mm 3.94 m 6.44 m 11.38 m² 0.80 kg/cm² 91,762 kg

* Crane equipped with: 39.0m boom, extension, jib, 90t hook block, and 11t headache ball

5


TRANSPORT PLAN

p/n 131851 67 20010 Rev A 05-08

p/n 131851 67 20010 Rev A 05-08

p/n 131851 68 20010 RevA 0508

p/n 131851 68 20010 RevA 0508

p/n 131851 68 20010 RevA 0508p/n 131851 68 20010 RevA 0508

p/n 131851 69 20010 RevA 0508

p/n 131851 69 20010 RevA 0508

Selectfirmandlevelsite1 RemovetrackFrames5

Removecounterweights2 BackTrailerUnderCrane6

RotateUpperoverside3 RetractCarbodyJacks7

Extend Carbody Jacks4 Lower Boom8

MAJORCOMPONENTSHIPPINGWEIGHTSSHOWNONPAGE3.

6


TRANSPORT DIMENSIONS (TRACkS REMOVED)

7


TRANSPORT DIMENSIONS

8


39M Main bOOM, 10,7M extensiOn & 7,6M jib

1.5 m1.5 m1.5 m1.5 m

9


LOAD CHARTS

notes: 1. Capacities appearing above the bold line are based on structural strength. Capacities appearing below the bold line are based on stability and do not exceed 75% of tipping. 2. During operation the wind speed must not exceed 36 km/hr. 3. An * on the chart indicates positions without rated loads. These areas are susceptible to instability eitherintheforwarddirectionorthebackwardsdirection.Evenwithoutaload,theboomshouldnotbepositionedinthesespecificconfigurationsoftheloadcharttoavoidtipping.

Warning: all stowed load handling devices are considered loads. see deduction chart for values.

360 DEGREE RATING - LOADS IN kg x 1000MANTIS Model GTC-1000EX LOAD CHART 39.0m BOOM

TMC# 138976 - 10 - Rev 0 082411

LOAD CHARTS

CHART #1NO TRAVEL – LEVEL 0°TO 1°

MAIN BOOM with TRACKS FULLY EXTENDED

16.1t COUNTERWEIGHT MAIN BOOM LENGTH (m)

12.8 15.7 18.6 21.5 25.9 30.3 34.7 39.0 RADIUS (m)

s ° s ° s ° s ° s ° s ° s ° s ° RADIUS

(m)

2.5 74.9 100.0 77.7 68.0 2.53.0 72.5 91.5 75.9 66.8 78.1 56.7 3.03.5 70.1 82.3 73.9 64.7 76.5 53.3 78.4 44.3 3.54.0 67.6 76.7 72.0 62.1 74.9 50.1 77.0 41.1 79.3 30.7 4.04.5 65.1 72.7 70.1 59.4 73.3 47.1 75.6 38.1 78.1 29.2 4.55.0 62.6 68.3 68.1 57.1 71.7 44.8 74.3 36.2 77.0 27.6 78.9 22.3 5.06.0 57.2 59.4 64.0 52.6 68.4 40.3 71.4 33.0 74.7 24.4 76.9 21.4 78.6 20.4 6.07.0 51.5 53.4 59.8 46.6 65.0 36.6 68.6 29.4 72.4 22.2 75.0 20.5 76.9 19.6 78.4 17.5 7.08.0 45.2 45.0 55.3 41.5 61.4 32.8 65.6 26.3 70.0 20.5 73.0 19.7 75.2 18.6 76.9 16.7 8.09.0 38.0 36.4 50.6 36.0 57.8 29.1 62.6 23.7 67.6 19.6 71.0 18.9 73.5 17.4 75.4 16.0 9.0

10.0 29.1 30.3 45.5 29.9 54.0 26.3 59.5 21.4 65.2 18.1 69.0 17.3 71.7 16.1 73.9 15.2 10.011.0 15.5 25.7 39.8 25.4 50.0 24.3 56.3 19.4 62.7 16.8 66.9 16.0 70.0 14.8 72.3 14.4 11.012.0 33.3 21.8 45.7 21.6 53.0 17.6 60.1 16.0 64.8 15.6 68.2 13.8 70.8 13.4 12.013.0 25.1 19.0 41.0 18.8 49.5 16.5 57.5 15.4 62.7 14.6 66.4 13.0 69.2 12.6 13.014.0 11.9 16.7 35.8 16.5 45.8 15.7 54.8 14.8 60.5 13.6 64.6 12.3 67.6 12.0 14.015.0 29.7 14.6 41.8 14.4 51.9 14.2 58.3 12.5 62.7 11.5 66.0 11.1 15.016.0 22.1 13.0 37.5 12.8 49.0 12.9 56.0 11.7 60.8 10.9 64.4 10.4 16.017.0 8.6 11.6 32.6 11.4 45.9 11.5 53.6 11.1 58.9 10.3 62.7 9.7 17.018.0 26.9 10.3 42.7 10.5 51.2 10.5 56.9 9.7 61.0 9.0 18.019.0 19.6 9.2 39.2 9.8 48.7 9.9 54.9 9.1 59.3 8.5 19.020.0 4.7 8.3 35.4 8.9 46.0 9.2 52.8 8.5 57.6 8.0 20.021.0 31.2 8.0 43.3 8.4 50.6 8.0 55.8 7.4 21.022.0 26.4 7.3 40.4 7.6 48.4 7.6 54.0 7.0 22.023.0 20.4 6.5 37.3 6.9 46.1 7.1 52.1 6.7 23.024.0 11.6 5.9 33.9 6.3 43.7 6.5 50.2 6.4 24.025.0 30.2 5.7 41.2 5.9 48.2 6.0 25.026.0 26.0 5.2 38.6 5.4 46.2 5.5 26.027.0 21.0 4.7 35.8 4.9 44.1 5.0 27.028.0 14.2 4.3 32.8 4.5 41.9 4.6 28.029.0 29.4 4.0 39.6 4.2 29.030.0 25.7 3.7 37.2 3.8 30.031.0 21.4 3.3 34.6 3.4 31.032.0 15.8 3.0 31.8 3.1 32.033.0 6.2 2.7 28.8 2.8 33.034.0 25.5 2.5 34.035.0 21.7 2.2 35.036.0 17.0 2.0 36.037.0 10.2 1.7 37.0

Parts of Line

10 8 7 6 4 3 3 3 Parts of Line

Telescoping Sequence (%) I 0% 33% 67% 100% 100% 100% 100% 100% III 0% 0% 0% 0% 25% 50% 75% 100% IIIII 0% 0% 0% 0% 25% 50% 75% 100% III

Notes:1. Capacities appearing above the bold line are based on structural strength. Capacities appearing below the bold line are basedon stability and do not exceed 75% of tipping. 2. During operation the wind speed must not exceed 36 km/hr. 3. An * on the chart indicates positions without rated loads. These areas are susceptible to instability either in the forward direction or the backwards direction. Even without a load, the boom should not be positioned in these specific configurations ofthe load chart to avoid tipping. Warning: All stowed load handling devices are considered loads. See deduction chart for values.

10


LOAD CHARTS




TMC# 138976 - 11 - Rev 0 082411




12.8 15.7 18.6 21.5 25.9 30.3 34.7 39.0 RADIUS (m)

s ° s ° s ° s ° s ° s ° s ° s ° RADIUS

(m)

2.5 74.9 100.0 77.7 68.0 2.53.0 72.5 91.5 75.9 66.8 78.1 56.7 3.03.5 70.1 82.3 73.9 64.7 76.5 53.3 78.4 44.3 3.54.0 67.6 76.7 72.0 62.1 74.9 50.1 77.0 41.1 79.3 30.7 4.04.5 65.1 72.7 70.1 59.4 73.3 47.1 75.6 38.1 78.1 29.2 4.55.0 62.6 68.3 68.1 57.1 71.7 44.8 74.3 36.2 77.0 27.6 78.9 22.3 5.06.0 57.2 59.4 64.0 52.6 68.4 40.3 71.4 33.0 74.7 24.4 76.9 21.4 78.6 19.4 6.07.0 51.5 53.4 59.8 46.6 65.0 36.6 68.6 29.4 72.4 22.2 75.0 20.5 76.9 18.6 78.4 15.7 7.08.0 45.2 44.7 55.3 41.5 61.4 32.8 65.6 26.3 70.0 20.5 73.0 19.7 75.2 17.7 76.9 15.1 8.09.0 38.0 36.1 50.6 35.6 57.8 29.1 62.6 23.7 67.6 19.6 71.0 18.9 73.5 16.5 75.4 14.4 9.0

10.0 29.1 30.0 45.5 29.6 54.0 26.3 59.5 21.4 65.2 18.1 69.0 17.3 71.7 15.3 73.9 13.7 10.011.0 15.5 25.4 39.8 25.1 50.0 24.3 56.3 19.4 62.7 16.8 66.9 16.0 70.0 14.1 72.3 13.0 11.012.0 33.3 21.5 45.7 21.2 53.0 17.6 60.1 16.0 64.8 15.6 68.2 13.1 70.8 12.0 12.013.0 25.1 18.7 41.0 18.5 49.5 16.5 57.5 15.4 62.7 14.6 66.4 12.4 69.2 11.4 13.014.0 11.9 16.4 35.8 16.2 45.8 15.7 54.8 14.8 60.5 13.6 64.6 11.6 67.6 10.8 14.015.0 29.7 14.3 41.8 14.1 51.9 14.2 58.3 12.5 62.7 10.9 66.0 10.0 15.016.0 22.1 12.7 37.5 12.5 49.0 12.9 56.0 11.7 60.8 10.3 64.4 9.3 16.017.0 8.6 11.3 32.6 11.1 45.9 11.5 53.6 11.1 58.9 9.8 62.7 8.8 17.018.0 26.9 9.9 42.7 10.5 51.2 10.5 56.9 9.2 61.0 8.1 18.019.0 19.6 8.9 39.2 9.5 48.7 9.9 54.9 8.6 59.3 7.6 19.020.0 4.7 7.9 35.4 8.6 46.0 8.9 52.8 8.1 57.6 7.2 20.021.0 31.2 7.8 43.3 8.1 50.6 7.6 55.8 6.7 21.022.0 26.4 7.0 40.4 7.4 48.4 7.2 54.0 6.3 22.023.0 20.4 6.3 37.3 6.6 46.1 7.0 52.1 6.0 23.024.0 11.6 5.6 33.9 6.0 43.7 6.3 50.2 5.7 24.025.0 30.2 5.4 41.2 5.8 48.2 5.4 25.026.0 26.0 4.9 38.6 5.2 46.2 5.1 26.027.0 21.0 4.4 35.8 4.7 44.1 4.9 27.028.0 14.2 4.0 32.8 4.3 41.9 4.5 28.029.0 29.4 3.9 39.6 4.1 29.030.0 25.7 3.5 37.2 3.7 30.031.0 21.4 3.1 34.6 3.3 31.032.0 15.8 2.8 31.8 3.0 32.033.0 6.2 2.5 28.8 2.7 33.034.0 25.5 2.4 34.035.0 21.7 2.1 35.036.0 17.0 1.9 36.037.0 10.2 1.6 37.0

Parts of Line

10 8 7 6 4 3 3 3 Parts of Line



11


LOAD CHARTS




TMC# 138976 - 13 - Rev 0 082411

CHART #4 NO TRAVEL – LEVEL 3°TO 4°



12.8 15.7 18.6 21.5 25.9 30.3 34.7 39.0 RADIUS (m)

s ° s ° s ° s ° s ° s ° s ° s ° RADIUS

(m)

2.5 74.9 75.0 77.7 51.0 2.53.0 72.5 68.6 75.9 50.1 78.1 42.0 3.03.5 70.1 61.7 73.9 48.5 76.5 39.5 78.4 32.3 3.54.0 67.6 57.5 72.0 46.6 74.9 37.1 77.0 30.0 79.3 22.1 4.04.5 65.1 54.5 70.1 44.5 73.3 34.9 75.6 27.8 78.1 21.1 4.55.0 62.6 51.2 68.1 42.8 71.7 33.2 74.3 26.5 77.0 19.9 78.9 15.8 5.06.0 57.2 44.5 64.0 39.4 68.4 29.9 71.4 24.1 74.7 17.5 76.9 15.2 78.6 14.3 6.07.0 51.5 40.1 59.8 35.0 65.0 27.0 68.6 21.5 72.4 16.0 75.0 14.6 76.9 13.7 78.4 12.2 7.08.0 45.2 35.3 55.3 31.1 61.4 24.3 65.6 19.2 70.0 14.8 73.0 14.0 75.2 13.0 76.9 11.7 8.09.0 38.0 29.7 50.6 28.3 57.8 21.5 62.6 17.3 67.6 14.1 71.0 13.4 73.5 12.2 75.4 11.2 9.0

10.0 29.1 27.0 45.5 26.0 54.0 19.4 59.5 15.7 65.2 13.0 69.0 12.3 71.7 11.3 73.9 10.7 10.011.0 15.5 24.5 39.8 23.2 50.0 18.0 56.3 14.1 62.7 12.1 66.9 11.3 70.0 10.4 72.3 10.1 11.012.0 33.3 19.4 45.7 17.5 53.0 12.8 60.1 11.5 64.8 11.1 68.2 9.7 70.8 9.3 12.013.0 25.1 16.5 41.0 15.5 49.5 12.1 57.5 11.1 62.7 10.4 66.4 9.1 69.2 8.9 13.014.0 11.9 13.6 35.8 13.4 45.8 11.5 54.8 10.7 60.5 9.6 64.6 8.6 67.6 8.4 14.015.0 29.7 12.1 41.8 11.0 51.9 10.2 58.3 8.9 62.7 8.1 66.0 7.8 15.016.0 22.1 10.7 37.5 9.9 49.0 9.3 56.0 8.3 60.8 7.6 64.4 7.3 16.017.0 8.6 8.9 32.6 8.7 45.9 8.3 53.6 7.9 58.9 7.2 62.7 6.8 17.018.0 26.9 7.9 42.7 7.6 51.2 7.5 56.9 6.8 61.0 6.3 18.019.0 19.6 7.0 39.2 7.4 48.7 7.0 54.9 6.4 59.3 5.9 19.020.0 4.7 7.9 35.4 7.4 46.0 6.6 52.8 6.0 57.6 5.6 20.021.0 31.2 7.0 43.3 6.2 50.6 5.6 55.8 5.2 21.022.0 26.4 6.6 40.4 5.9 48.4 5.3 54.0 4.9 22.023.0 20.4 6.3 37.3 5.6 46.1 5.1 52.1 4.7 23.024.0 11.6 5.7 33.9 5.3 43.7 4.9 50.2 4.5 24.025.0 30.2 5.0 41.2 4.6 48.2 4.2 25.026.0 26.0 4.8 38.6 4.4 46.2 4.0 26.027.0 21.0 4.5 35.8 4.1 44.1 3.8 27.028.0 14.2 4.0 32.8 3.9 41.9 3.6 28.029.0 29.4 3.7 39.6 3.4 29.030.0 25.7 3.5 37.2 3.2 30.031.0 21.4 3.4 34.6 3.0 31.032.0 15.8 3.1 31.8 2.9 32.033.0 6.2 2.7 28.8 2.7 33.034.0 25.5 2.6 34.035.0 21.7 2.5 35.036.0 17.0 2.3 36.037.0 10.2 2.0 37.0

Parts of Line

10 8 7 6 4 3 3 3 Parts of Line


Notes:1. Capacities appearing above the bold line are based on structural strength. Capacities appearing below the bold line are based on stability and do not exceed 75% of tipping. 2. During operation the wind speed must not exceed 36 km/hr. 3. An * on the chart indicates positions without rated loads. These areas are susceptible to instability either in the forward direction or the backwards direction. Even without a load, the boom should not be positioned in these specific configurations ofthe load chart to avoid tipping. Warning: All stowed load handling devices are considered loads. See deduction chart for values.

12


LOAD CHARTS




TMC# 138976 - 14 - Rev 0 082411

CHART #5 TRAVEL SPEEDS UP TO 1.0 km/h – LEVEL 0°TO 2°



12.8 15.7 18.6 21.5 25.9 30.3 34.7 39.0 RADIUS (m)

s ° s ° s ° s ° s ° s ° s ° s ° RADIUS

(m)

2.5 74.9 100.0 77.7 68.0 2.53.0 72.5 91.5 75.9 66.8 78.1 56.7 3.03.5 70.1 82.3 73.9 64.7 76.5 53.3 78.4 44.3 3.54.0 67.6 76.7 72.0 62.1 74.9 50.1 77.0 41.1 79.3 30.7 4.04.5 65.1 72.7 70.1 59.4 73.3 47.1 75.6 38.1 78.1 29.2 4.55.0 62.6 68.3 68.1 57.1 71.7 44.8 74.3 36.2 77.0 27.6 78.9 22.3 5.06.0 57.2 59.4 64.0 52.6 68.4 40.3 71.4 33.0 74.7 24.4 76.9 21.4 78.6 19.4 6.07.0 51.5 51.2 59.8 46.6 65.0 36.6 68.6 29.4 72.4 22.2 75.0 20.5 76.9 18.6 78.4 15.7 7.08.0 45.2 39.7 55.3 39.2 61.4 32.8 65.6 26.3 70.0 20.5 73.0 19.7 75.2 17.7 76.9 15.1 8.09.0 38.0 32.1 50.6 31.6 57.8 29.1 62.6 23.7 67.6 19.6 71.0 18.9 73.5 16.5 75.4 14.4 9.0

10.0 29.1 26.7 45.5 26.3 54.0 26.0 59.5 21.4 65.2 18.1 69.0 17.3 71.7 15.3 73.9 13.7 10.011.0 15.5 22.6 39.8 22.2 50.0 22.0 56.3 19.4 62.7 16.8 66.9 16.0 70.0 14.1 72.3 13.0 11.012.0 33.3 19.1 45.7 18.9 53.0 17.6 60.1 16.0 64.8 15.6 68.2 13.1 70.8 12.0 12.013.0 25.1 16.6 41.0 16.4 49.5 16.2 57.5 15.4 62.7 14.6 66.4 12.4 69.2 11.4 13.014.0 11.9 14.6 35.8 14.4 45.8 14.2 54.8 14.8 60.5 13.6 64.6 11.6 67.6 10.8 14.015.0 29.7 12.7 41.8 12.5 51.9 13.1 58.3 12.5 62.7 10.9 66.0 10.0 15.016.0 22.1 11.2 37.5 11.1 49.0 11.7 56.0 11.7 60.8 10.3 64.4 9.3 16.017.0 8.6 10.0 32.6 9.9 45.9 10.5 53.6 10.8 58.9 9.8 62.7 8.8 17.018.0 26.9 8.8 42.7 9.4 51.2 9.7 56.9 9.2 61.0 8.1 18.019.0 19.6 7.9 39.2 8.5 48.7 8.8 54.9 8.6 59.3 7.6 19.020.0 4.7 7.1 35.4 7.7 46.0 7.9 52.8 8.1 57.6 7.2 20.021.0 31.2 6.9 43.3 7.2 50.6 7.5 55.8 6.7 21.022.0 26.4 6.3 40.4 6.6 48.4 6.8 54.0 6.3 22.023.0 20.4 5.7 37.3 6.0 46.1 6.2 52.1 6.0 23.024.0 11.6 5.2 33.9 5.4 43.7 5.7 50.2 5.7 24.025.0 30.2 5.0 41.2 5.2 48.2 5.4 25.026.0 26.0 4.5 38.6 4.8 46.2 4.9 26.027.0 21.0 4.1 35.8 4.4 44.1 4.5 27.028.0 14.2 3.7 32.8 4.0 41.9 4.1 28.029.0 29.4 3.6 39.6 3.8 29.030.0 25.7 3.3 37.2 3.4 30.031.0 21.4 2.9 34.6 3.1 31.032.0 15.8 2.6 31.8 2.8 32.033.0 6.2 2.3 28.8 2.5 33.034.0 25.5 2.2 34.035.0 21.7 2.0 35.036.0 17.0 1.7 36.037.0 10.2 1.5 37.0

Parts of Line

10 8 7 6 4 3 3 3 Parts of Line


Notes:1. Capacities appearing above the bold line are based on structural strength. Capacities appearing below the bold line are basedon stability and do not exceed 66.6% of tipping. 2. During operation the wind speed must not exceed 36 km/hr. 3. An * on the chart indicates positions without rated loads. These areas are susceptible to instability either in the forward direction or the backwards direction. Even without a load, the boom should not be positioned in these specific configurations ofthe load chart to avoid tipping. Warning: All stowed load handling devices are considered loads. See deduction chart for values.

13


LOAD CHARTS




TMC# 138976 - 15 - Rev 0 082411

CHART #6TRAVEL SPEEDS UP TO 1.0 km/h – LEVEL 2°TO 4°



12.8 15.7 18.6 21.5 25.9 30.3 34.7 39.0 RADIUS (m)

s ° s ° s ° s ° s ° s ° s ° s ° RADIUS

(m)

2.5 74.9 75.0 77.7 51.0 2.53.0 72.5 68.6 75.9 50.1 78.1 42.0 3.03.5 70.1 61.7 73.9 48.5 76.5 39.5 78.4 32.3 3.54.0 67.6 57.5 72.0 46.6 74.9 37.1 77.0 30.0 79.3 22.1 4.04.5 65.1 54.5 70.1 44.5 73.3 34.9 75.6 27.8 78.1 21.1 4.55.0 62.6 51.2 68.1 42.8 71.7 33.2 74.3 26.5 77.0 19.9 78.9 15.8 5.06.0 57.2 44.5 64.0 39.4 68.4 29.9 71.4 24.1 74.7 17.5 76.9 15.2 78.6 14.3 6.07.0 51.5 40.1 59.8 35.0 65.0 27.0 68.6 21.5 72.4 16.0 75.0 14.6 76.9 13.7 78.4 12.2 7.08.0 45.2 35.3 55.3 31.1 61.4 24.3 65.6 19.2 70.0 14.8 73.0 14.0 75.2 13.0 76.9 11.7 8.09.0 38.0 29.7 50.6 28.3 57.8 21.5 62.6 17.3 67.6 14.1 71.0 13.4 73.5 12.2 75.4 11.2 9.0

10.0 29.1 26.7 45.5 26.0 54.0 19.4 59.5 15.7 65.2 13.0 69.0 12.3 71.7 11.3 73.9 10.7 10.011.0 15.5 22.6 39.8 22.2 50.0 18.0 56.3 14.1 62.7 12.1 66.9 11.3 70.0 10.4 72.3 10.1 11.012.0 33.3 19.1 45.7 17.5 53.0 12.8 60.1 11.5 64.8 11.1 68.2 9.7 70.8 9.3 12.013.0 25.1 16.5 41.0 15.5 49.5 12.1 57.5 11.1 62.7 10.4 66.4 9.1 69.2 8.9 13.014.0 11.9 13.6 35.8 13.4 45.8 11.5 54.8 10.7 60.5 9.6 64.6 8.6 67.6 8.4 14.015.0 29.7 12.1 41.8 11.0 51.9 10.2 58.3 8.9 62.7 8.1 66.0 7.8 15.016.0 22.1 10.7 37.5 9.9 49.0 9.3 56.0 8.3 60.8 7.6 64.4 7.3 16.017.0 8.6 8.9 32.6 8.7 45.9 8.3 53.6 7.9 58.9 7.2 62.7 6.8 17.018.0 26.9 7.9 42.7 7.6 51.2 7.5 56.9 6.8 61.0 6.3 18.019.0 19.6 7.0 39.2 7.4 48.7 7.0 54.9 6.4 59.3 5.9 19.020.0 4.7 7.1 35.4 7.4 46.0 6.6 52.8 6.0 57.6 5.6 20.021.0 31.2 7.0 43.3 6.2 50.6 5.6 55.8 5.2 21.022.0 26.4 6.3 40.4 5.9 48.4 5.3 54.0 4.9 22.023.0 20.4 5.7 37.3 5.6 46.1 5.1 52.1 4.7 23.024.0 11.6 5.2 33.9 5.3 43.7 4.9 50.2 4.5 24.025.0 30.2 5.0 41.2 4.6 48.2 4.2 25.026.0 26.0 4.7 38.6 4.4 46.2 4.0 26.027.0 21.0 4.3 35.8 4.1 44.1 3.8 27.028.0 14.2 3.9 32.8 3.9 41.9 3.6 28.029.0 29.4 3.7 39.6 3.4 29.030.0 25.7 3.5 37.2 3.2 30.031.0 21.4 3.2 34.6 3.0 31.032.0 15.8 2.9 31.8 2.9 32.033.0 6.2 2.6 28.8 2.7 33.034.0 25.5 2.6 34.035.0 21.7 2.4 35.036.0 17.0 2.1 36.037.0 10.2 1.9 37.0

Parts of Line

10 8 7 6 4 3 3 3 Parts of Line


Notes:1. Capacities appearing above the bold line are based on structural strength. Capacities appearing below the bold line are based on stability and do not exceed 66.6% of tipping. 2. During operation the wind speed must not exceed 36 km/hr. 3. An * on the chart indicates positions without rated loads. These areas are susceptible to instability either in the forward direction or the backwards direction. Even without a load, the boom should not be positioned in these specific configurations ofthe load chart to avoid tipping. Warning: All stowed load handling devices are considered loads. See deduction chart for values.

14


LOAD CHARTS




TMC# 138976 - 16 - Rev 0 082411

CHART #7 NO TRAVEL – LEVEL 0°TO 1°



12.8 15.7 18.6 21.5 25.9 30.3 34.7 39.0 RADIUS (m)

s ° s ° s ° s ° s ° s ° s ° s ° RADIUS

(m)

2.5 74.9 100.0 77.7 68.0 2.53.0 72.5 91.5 75.9 66.8 78.1 56.7 3.03.5 70.1 82.3 73.9 64.7 76.5 53.3 78.4 44.3 3.54.0 67.6 76.7 72.0 62.1 74.9 50.1 77.0 41.1 79.3 30.7 4.04.5 65.1 72.7 70.1 59.4 73.3 47.1 75.6 38.1 78.1 29.2 4.55.0 62.6 68.3 68.1 57.1 71.7 44.8 74.3 36.2 77.0 27.6 78.9 22.3 5.06.0 57.2 59.4 64.0 52.6 68.4 40.3 71.4 33.0 74.7 24.4 76.9 21.4 78.6 20.4 6.07.0 51.5 46.7 59.8 45.1 65.0 36.6 68.6 29.4 72.4 22.2 75.0 20.5 76.9 19.6 78.4 17.5 7.08.0 45.2 35.9 55.3 35.6 61.4 32.8 65.6 26.3 70.0 20.5 73.0 19.7 75.2 18.6 76.9 16.7 8.09.0 38.0 28.7 50.6 28.4 57.8 28.4 62.6 23.7 67.6 19.6 71.0 18.9 73.5 17.4 75.4 16.0 9.0

10.0 29.1 23.6 45.5 23.4 54.0 23.4 59.5 21.4 65.2 18.1 69.0 17.3 71.7 16.1 73.9 15.2 10.011.0 15.5 19.7 39.8 19.6 50.0 19.6 56.3 19.4 62.7 16.8 66.9 16.0 70.0 14.8 72.3 14.4 11.012.0 33.3 16.7 45.7 16.7 53.0 16.8 60.1 16.0 64.8 15.6 68.2 13.8 70.8 13.4 12.013.0 25.1 14.3 41.0 14.4 49.5 14.5 57.5 15.3 62.7 14.6 66.4 13.0 69.2 12.6 13.014.0 11.9 12.4 35.8 12.5 45.8 12.6 54.8 13.4 60.5 13.6 64.6 12.3 67.6 12.0 14.015.0 29.7 10.9 41.8 11.0 51.9 11.8 58.3 12.1 62.7 11.5 66.0 11.1 15.016.0 22.1 9.5 37.5 9.7 49.0 10.4 56.0 10.8 60.8 10.9 64.4 10.4 16.017.0 8.6 8.4 32.6 8.5 45.9 9.3 53.6 9.6 58.9 10.0 62.7 9.7 17.018.0 26.9 7.5 42.7 8.3 51.2 8.6 56.9 8.9 61.0 9.0 18.019.0 19.6 6.5 39.2 7.4 48.7 7.7 54.9 8.1 59.3 8.3 19.020.0 4.7 5.9 35.4 6.6 46.0 6.9 52.8 7.3 57.6 7.5 20.021.0 31.2 5.8 43.3 6.2 50.6 6.6 55.8 6.8 21.022.0 26.4 5.2 40.4 5.5 48.4 5.9 54.0 6.1 22.023.0 20.4 4.6 37.3 5.0 46.1 5.3 52.1 5.5 23.024.0 11.6 4.0 33.9 4.4 43.7 4.8 50.2 5.0 24.025.0 30.2 3.9 41.2 4.3 48.2 4.5 25.026.0 26.0 3.5 38.6 3.8 46.2 4.1 26.027.0 21.0 3.1 35.8 3.4 44.1 3.6 27.028.0 14.2 2.7 32.8 3.1 41.9 3.3 28.029.0 29.4 2.7 39.6 2.9 29.030.0 25.7 2.4 37.2 2.6 30.031.0 21.4 2.1 34.6 2.3 31.032.0 15.8 1.8 31.8 2.0 32.033.0 6.2 1.6 28.8 1.8 33.034.0 25.5 1.5 34.035.0 21.7 1.3 35.036.0 17.0 1.1 36.037.0 10.2 0.9 37.0

Parts of Line

10 8 7 6 4 3 3 3 Parts of Line



15


LOAD CHARTS




TMC# 138976 - 19 - Rev 0 082411




12.8 15.7 18.6 21.5 25.9 30.3 34.7 39.0 RADIUS (m)

s ° s ° s ° s ° s ° s ° s ° s ° RADIUS

(m)

2.5 74.9 75.0 77.7 51.0 2.53.0 72.5 68.6 75.9 50.1 78.1 42.0 3.03.5 70.1 61.7 73.9 48.5 76.5 39.5 78.4 32.3 3.54.0 67.6 57.5 72.0 46.6 74.9 37.1 77.0 30.0 79.3 22.1 4.04.5 65.1 54.5 70.1 44.5 73.3 34.9 75.6 27.8 78.1 21.1 4.55.0 62.6 51.2 68.1 42.8 71.7 33.2 74.3 26.5 77.0 19.9 78.9 15.8 5.06.0 57.2 44.5 64.0 39.4 68.4 29.9 71.4 24.1 74.7 17.5 76.9 15.2 78.6 14.3 6.07.0 51.5 39.9 59.8 35.0 65.0 27.0 68.6 21.5 72.4 16.0 75.0 14.6 76.9 13.7 78.4 12.2 7.08.0 45.2 33.0 55.3 30.1 61.4 24.3 65.6 19.2 70.0 14.8 73.0 14.0 75.2 13.0 76.9 11.7 8.09.0 38.0 27.8 50.6 25.4 57.8 21.5 62.6 17.3 67.6 14.1 71.0 13.4 73.5 12.2 75.4 11.2 9.0

10.0 29.1 23.0 45.5 21.8 54.0 19.4 59.5 15.7 65.2 13.0 69.0 12.3 71.7 11.3 73.9 10.7 10.011.0 15.5 19.2 39.8 18.9 50.0 17.8 56.3 14.1 62.7 12.1 66.9 11.3 70.0 10.4 72.3 10.1 11.012.0 33.3 16.2 45.7 15.6 53.0 12.8 60.1 11.5 64.8 11.1 68.2 9.7 70.8 9.3 12.013.0 25.1 13.8 41.0 13.7 49.5 12.1 57.5 11.1 62.7 10.4 66.4 9.1 69.2 8.9 13.014.0 11.9 11.9 35.8 12.1 45.8 11.3 54.8 10.7 60.5 9.6 64.6 8.6 67.6 8.4 14.015.0 29.7 10.6 41.8 10.1 51.9 10.2 58.3 8.9 62.7 8.1 66.0 7.8 15.016.0 22.1 9.2 37.5 8.9 49.0 9.1 56.0 8.3 60.8 7.6 64.4 7.3 16.017.0 8.6 8.0 32.6 8.0 45.9 8.2 53.6 7.9 58.9 7.2 62.7 6.8 17.018.0 26.9 7.0 42.7 7.4 51.2 7.5 56.9 6.8 61.0 6.3 18.019.0 19.6 6.0 39.2 6.6 48.7 6.8 54.9 6.4 59.3 5.9 19.020.0 4.7 5.4 35.4 6.0 46.0 6.1 52.8 6.0 57.6 5.6 20.021.0 31.2 5.4 43.3 5.6 50.6 5.6 55.8 5.2 21.022.0 26.4 4.7 40.4 5.0 48.4 5.1 54.0 4.9 22.023.0 20.4 4.1 37.3 4.5 46.1 4.6 52.1 4.6 23.024.0 11.6 3.6 33.9 4.1 43.7 4.2 50.2 4.2 24.025.0 30.2 3.7 41.2 3.8 48.2 3.8 25.026.0 26.0 3.2 38.6 3.4 46.2 3.5 26.027.0 21.0 2.8 35.8 3.1 44.1 3.1 27.028.0 14.2 2.5 32.8 2.8 41.9 2.8 28.029.0 29.4 2.5 39.6 2.5 29.030.0 25.7 2.2 37.2 2.3 30.031.0 21.4 1.9 34.6 2.0 31.032.0 15.8 1.6 31.8 1.8 32.033.0 6.2 1.3 28.8 1.6 33.034.0 25.5 1.4 34.035.0 21.7 1.1 35.036.0 17.0 0.9 36.037.0 10.2 0.7 37.0

Parts of Line

10 8 7 6 4 3 3 3 Parts of Line



16


LOAD CHARTS




TMC# 138976 - 20 - Rev 0 082411




12.8 15.7 18.6 21.5 25.9 30.3 34.7 39.0 RADIUS (m)

s ° s ° s ° s ° s ° s ° s ° s ° RADIUS

(m)

2.5 74.9 100.0 77.7 68.0 2.53.0 72.5 91.5 75.9 66.8 78.1 56.7 3.03.5 70.1 82.3 73.9 64.7 76.5 53.3 78.4 44.3 3.54.0 67.6 76.7 72.0 62.1 74.9 50.1 77.0 41.1 79.3 30.7 4.04.5 65.1 72.7 70.1 59.4 73.3 47.1 75.6 38.1 78.1 29.2 4.55.0 62.6 68.3 68.1 57.1 71.7 44.8 74.3 36.2 77.0 27.6 78.9 22.3 5.06.0 57.2 55.2 64.0 50.5 68.4 40.3 71.4 33.0 74.7 24.4 76.9 21.4 78.6 19.4 6.07.0 51.5 40.9 59.8 40.1 65.0 36.6 68.6 29.4 72.4 22.2 75.0 20.5 76.9 18.6 78.4 15.7 7.08.0 45.2 31.3 55.3 31.1 61.4 31.0 65.6 26.3 70.0 20.5 73.0 19.7 75.2 17.7 76.9 15.1 8.09.0 38.0 25.0 50.6 24.8 57.8 24.9 62.6 23.7 67.6 19.6 71.0 18.9 73.5 16.5 75.4 14.4 9.0

10.0 29.1 20.4 45.5 20.3 54.0 20.5 59.5 20.5 65.2 18.1 69.0 17.3 71.7 15.3 73.9 13.7 10.011.0 15.5 17.0 39.8 17.0 50.0 17.1 56.3 17.2 62.7 16.8 66.9 16.0 70.0 14.1 72.3 13.0 11.012.0 33.3 14.4 45.7 14.5 53.0 14.6 60.1 15.4 64.8 15.6 68.2 13.1 70.8 12.0 12.013.0 25.1 12.3 41.0 12.5 49.5 12.6 57.5 13.3 62.7 13.8 66.4 12.4 69.2 11.4 13.014.0 11.9 10.6 35.8 10.8 45.8 10.9 54.8 11.6 60.5 12.1 64.6 11.6 67.6 10.8 14.015.0 29.7 9.4 41.8 9.5 51.9 10.2 58.3 10.6 62.7 10.9 66.0 10.0 15.016.0 22.1 8.2 37.5 8.3 49.0 9.0 56.0 9.4 60.8 9.8 64.4 9.3 16.017.0 8.6 7.2 32.6 7.3 45.9 8.0 53.6 8.4 58.9 8.8 62.7 8.8 17.018.0 26.9 6.4 42.7 7.1 51.2 7.5 56.9 7.9 61.0 8.1 18.019.0 19.6 5.6 39.2 6.3 48.7 6.7 54.9 7.1 59.3 7.3 19.020.0 4.7 4.9 35.4 5.6 46.0 6.0 52.8 6.4 57.6 6.6 20.021.0 31.2 5.0 43.3 5.4 50.6 5.8 55.8 6.0 21.022.0 26.4 4.5 40.4 4.9 48.4 5.2 54.0 5.4 22.023.0 20.4 4.0 37.3 4.4 46.1 4.7 52.1 4.9 23.024.0 11.6 3.5 33.9 4.0 43.7 4.3 50.2 4.5 24.025.0 30.2 3.5 41.2 3.9 48.2 4.1 25.026.0 26.0 3.1 38.6 3.5 46.2 3.7 26.027.0 21.0 2.7 35.8 3.1 44.1 3.4 27.028.0 14.2 2.4 32.8 2.8 41.9 3.0 28.029.0 29.4 2.4 39.6 2.7 29.030.0 25.7 2.1 37.2 2.4 30.031.0 21.4 1.9 34.6 2.1 31.032.0 15.8 1.6 31.8 1.8 32.033.0 6.2 1.4 28.8 1.6 33.034.0 25.5 1.4 34.035.0 21.7 1.2 35.036.0 17.0 1.0 36.037.0 10.2 0.8 37.0

Parts of Line

10 8 7 6 4 3 3 3 Parts of Line



17


LOAD CHARTS




TMC# 138976 - 21 - Rev 0 082411




12.8 15.7 18.6 21.5 25.9 30.3 34.7 39.0 RADIUS (m)

s ° s ° s ° s ° s ° s ° s ° s ° RADIUS

(m)

2.5 74.9 75.0 77.7 51.0 2.53.0 72.5 68.6 75.9 50.1 78.1 42.0 3.03.5 70.1 61.7 73.9 48.5 76.5 39.5 78.4 32.3 3.54.0 67.6 57.5 72.0 46.6 74.9 37.1 77.0 30.0 79.3 22.1 4.04.5 65.1 54.5 70.1 44.5 73.3 34.9 75.6 27.8 78.1 21.1 4.55.0 62.6 51.2 68.1 42.8 71.7 33.2 74.3 26.5 77.0 19.9 78.9 15.8 5.06.0 57.2 44.5 64.0 39.4 68.4 29.9 71.4 24.1 74.7 17.5 76.9 15.2 78.6 14.3 6.07.0 51.5 38.8 59.8 35.0 65.0 27.0 68.6 21.5 72.4 16.0 75.0 14.6 76.9 13.7 78.4 12.2 7.08.0 45.2 31.3 55.3 29.2 61.4 24.3 65.6 19.2 70.0 14.8 73.0 14.0 75.2 13.0 76.9 11.7 8.09.0 38.0 25.0 50.6 24.8 57.8 21.5 62.6 17.3 67.6 14.1 71.0 13.4 73.5 12.2 75.4 11.2 9.0

10.0 29.1 20.4 45.5 20.3 54.0 19.4 59.5 15.7 65.2 13.0 69.0 12.3 71.7 11.3 73.9 10.7 10.011.0 15.5 17.0 39.8 17.0 50.0 17.1 56.3 14.1 62.7 12.1 66.9 11.3 70.0 10.4 72.3 10.1 11.012.0 33.3 14.4 45.7 14.5 53.0 12.8 60.1 11.5 64.8 11.1 68.2 9.7 70.8 9.3 12.013.0 25.1 12.3 41.0 12.5 49.5 12.1 57.5 11.1 62.7 10.4 66.4 9.1 69.2 8.9 13.014.0 11.9 10.6 35.8 10.8 45.8 10.8 54.8 10.7 60.5 9.6 64.6 8.6 67.6 8.4 14.015.0 29.7 9.4 41.8 9.4 51.9 9.9 58.3 8.9 62.7 8.1 66.0 7.8 15.016.0 22.1 8.2 37.5 8.2 49.0 8.9 56.0 8.3 60.8 7.6 64.4 7.3 16.017.0 8.6 7.2 32.6 7.2 45.9 7.9 53.6 7.9 58.9 7.2 62.7 6.8 17.018.0 26.9 6.3 42.7 7.0 51.2 7.3 56.9 6.8 61.0 6.3 18.019.0 19.6 5.5 39.2 6.2 48.7 6.6 54.9 6.4 59.3 5.9 19.020.0 4.7 4.8 35.4 5.5 46.0 6.0 52.8 6.0 57.6 5.6 20.021.0 31.2 4.9 43.3 5.4 50.6 5.4 55.8 5.2 21.022.0 26.4 4.4 40.4 4.8 48.4 4.9 54.0 4.9 22.023.0 20.4 3.9 37.3 4.4 46.1 4.5 52.1 4.5 23.024.0 11.6 3.4 33.9 3.9 43.7 4.0 50.2 4.1 24.025.0 30.2 3.5 41.2 3.7 48.2 3.7 25.026.0 26.0 3.1 38.6 3.3 46.2 3.3 26.027.0 21.0 2.7 35.8 3.0 44.1 3.0 27.028.0 14.2 2.3 32.8 2.7 41.9 2.7 28.029.0 29.4 2.3 39.6 2.4 29.030.0 25.7 2.0 37.2 2.2 30.031.0 21.4 1.8 34.6 1.9 31.032.0 15.8 1.5 31.8 1.7 32.033.0 6.2 1.3 28.8 1.5 33.034.0 25.5 1.3 34.035.0 21.7 1.1 35.036.0 17.0 0.9 36.037.0 10.2 0.7 37.0

Parts of Line

10 8 7 6 4 3 3 3 Parts of Line



18


LOAD CHARTS




TMC# 138976 - 22 - Rev 0 082411



0t COUNTERWEIGHT MAIN BOOM LENGTH (m)

12.8 15.7 18.6 21.5 25.9 30.3 34.7 39.0 RADIUS (m)

s ° s ° s ° s ° s ° s ° s ° s ° RADIUS

(m)

2.5 74.9 100.0 77.7 68.0 2.53.0 72.5 91.5 75.9 66.8 78.1 56.7 3.03.5 70.1 82.3 73.9 64.7 76.5 53.3 78.4 44.3 3.54.0 67.6 76.7 72.0 62.1 74.9 50.1 77.0 41.1 79.3 30.7 4.04.5 65.1 72.7 70.1 59.4 73.3 47.1 75.6 38.1 78.1 29.2 4.55.0 62.6 64.6 68.1 57.1 71.7 44.8 74.3 36.2 77.0 27.6 78.9 22.3 5.06.0 57.2 46.1 64.0 43.3 68.4 40.3 71.4 33.0 74.7 24.4 76.9 21.4 78.6 20.4 6.07.0 51.5 34.4 59.8 33.3 65.0 31.5 68.6 29.4 72.4 22.2 75.0 20.5 76.9 19.6 78.4 17.5 7.08.0 45.2 26.0 55.3 26.3 61.4 25.3 65.6 24.2 70.0 20.5 73.0 19.7 75.2 18.6 76.9 16.7 8.09.0 38.0 20.4 50.6 20.7 57.8 20.7 62.6 20.0 67.6 19.6 71.0 18.9 73.5 17.4 75.4 16.0 9.0

10.0 29.1 16.4 45.5 16.8 54.0 16.8 59.5 16.7 65.2 16.9 69.0 16.6 71.7 16.1 73.9 15.2 10.011.0 15.5 13.4 39.8 13.9 50.0 13.9 56.3 14.0 62.7 14.4 66.9 14.2 70.0 14.2 72.3 14.0 11.012.0 33.3 11.6 45.7 11.6 53.0 11.7 60.1 12.4 64.8 12.3 68.2 12.3 70.8 12.2 12.013.0 25.1 9.7 41.0 9.8 49.5 9.9 57.5 10.7 62.7 10.7 66.4 10.8 69.2 10.7 13.014.0 11.9 8.2 35.8 8.3 45.8 8.4 54.8 9.2 60.5 9.4 64.6 9.5 67.6 9.5 14.015.0 29.7 7.0 41.8 7.1 51.9 7.9 58.3 8.2 62.7 8.4 66.0 8.4 15.016.0 22.1 5.8 37.5 6.0 49.0 6.9 56.0 7.2 60.8 7.4 64.4 7.5 16.017.0 8.6 4.9 32.6 5.0 45.9 5.9 53.6 6.2 58.9 6.6 62.7 6.6 17.018.0 26.9 4.2 42.7 5.1 51.2 5.4 56.9 5.8 61.0 5.9 18.019.0 19.6 3.5 39.2 4.3 48.7 4.7 54.9 5.1 59.3 5.2 19.020.0 4.7 3.2 35.4 3.7 46.0 4.0 52.8 4.4 57.6 4.7 20.021.0 31.2 3.1 43.3 3.4 50.6 3.9 55.8 4.1 21.022.0 26.4 2.6 40.4 2.9 48.4 3.3 54.0 3.6 22.023.0 20.4 2.1 37.3 2.5 46.1 2.9 52.1 3.1 23.024.0 11.6 1.7 33.9 2.0 43.7 2.5 50.2 2.7 24.025.0 30.2 1.7 41.2 2.1 48.2 2.3 25.026.0 26.0 1.3 38.6 1.7 46.2 2.0 26.027.0 21.0 1.0 35.8 1.4 44.1 1.7 27.028.0 14.2 0.7 32.8 1.1 41.9 1.4 28.029.0 29.4 0.8 39.6 1.1 29.030.0 25.7 0.6 37.2 0.9 30.031.0 21.4 * 34.6 0.6 31.032.0 15.8 * 31.8 * 32.033.0 6.2 * 28.8 * 33.034.0 25.5 * 34.035.0 21.7 * 35.036.0 17.0 * 36.037.0 10.2 * 37.0

Parts of Line

10 8 7 6 4 3 3 3 Parts of Line



19


LOAD CHARTS




TMC# 138976 - 25 - Rev 0 082411




12.8 15.7 18.6 21.5 25.9 30.3 34.7 39.0 RADIUS (m)

s ° s ° s ° s ° s ° s ° s ° s ° RADIUS

(m)

2.5 74.9 75.0 77.7 51.0 2.53.0 72.5 68.6 75.9 50.1 78.1 42.0 3.03.5 70.1 61.7 73.9 48.5 76.5 39.5 78.4 32.3 3.54.0 67.6 57.5 72.0 46.6 74.9 37.1 77.0 30.0 79.3 22.1 4.04.5 65.1 54.5 70.1 44.5 73.3 34.9 75.6 27.8 78.1 21.1 4.55.0 62.6 48.5 68.1 42.8 71.7 33.2 74.3 26.5 77.0 19.9 78.9 15.8 5.06.0 57.2 36.5 64.0 32.9 68.4 29.9 71.4 24.1 74.7 17.5 76.9 15.2 78.6 14.3 6.07.0 51.5 28.6 59.8 26.1 65.0 24.3 68.6 21.5 72.4 16.0 75.0 14.6 76.9 13.7 78.4 12.2 7.08.0 45.2 23.1 55.3 21.2 61.4 20.0 65.6 18.5 70.0 14.8 73.0 14.0 75.2 13.0 76.9 11.7 8.09.0 38.0 19.1 50.6 17.6 57.8 16.6 62.6 15.4 67.6 14.1 71.0 13.4 73.5 12.2 75.4 11.2 9.0

10.0 29.1 15.9 45.5 14.7 54.0 14.0 59.5 13.0 65.2 12.8 69.0 12.3 71.7 11.3 73.9 10.7 10.011.0 15.5 12.9 39.8 12.4 50.0 11.9 56.3 11.0 62.7 11.0 66.9 10.8 70.0 10.4 72.3 10.1 11.012.0 33.3 10.6 45.7 10.2 53.0 9.4 60.1 9.5 64.8 9.4 68.2 9.2 70.8 9.0 12.013.0 25.1 9.0 41.0 8.7 49.5 8.0 57.5 8.2 62.7 8.2 66.4 8.1 69.2 7.9 13.014.0 11.9 7.4 35.8 7.5 45.8 6.9 54.8 7.1 60.5 7.1 64.6 7.1 67.6 7.0 14.015.0 29.7 6.5 41.8 5.9 51.9 6.1 58.3 6.2 62.7 6.2 66.0 6.2 15.016.0 22.1 5.5 37.5 5.0 49.0 5.3 56.0 5.4 60.8 5.5 64.4 5.4 16.017.0 8.6 4.5 32.6 4.2 45.9 4.6 53.6 4.7 58.9 4.8 62.7 4.8 17.018.0 26.9 3.6 42.7 3.9 51.2 4.1 56.9 4.2 61.0 4.2 18.019.0 19.6 3.0 39.2 3.3 48.7 3.5 54.9 3.6 59.3 3.7 19.020.0 4.7 2.7 35.4 2.8 46.0 3.0 52.8 3.1 57.6 3.2 20.021.0 31.2 2.3 43.3 2.5 50.6 2.7 55.8 2.8 21.022.0 26.4 1.9 40.4 2.1 48.4 2.3 54.0 2.4 22.023.0 20.4 1.6 37.3 1.7 46.1 1.9 52.1 2.0 23.024.0 11.6 1.2 33.9 1.4 43.7 1.6 50.2 1.7 24.025.0 30.2 1.1 41.2 1.3 48.2 1.4 25.026.0 26.0 0.8 38.6 1.0 46.2 1.1 26.027.0 21.0 0.5 35.8 0.7 44.1 0.8 27.028.0 14.2 * 32.8 0.5 41.9 0.6 28.029.0 29.4 * 39.6 * 29.030.0 25.7 * 37.2 * 30.031.0 21.4 * 34.6 * 31.032.0 15.8 * 31.8 * 32.033.0 6.2 * 28.8 * 33.034.0 25.5 * 34.035.0 21.7 * 35.036.0 17.0 * 36.037.0 10.2 * 37.0

Parts of Line

10 8 7 6 4 3 3 3 Parts of Line



20


LOAD CHARTS




TMC# 138976 - 26 - Rev 0 082411




12.8 15.7 18.6 21.5 25.9 30.3 34.7 39.0 RADIUS (m)

s ° s ° s ° s ° s ° s ° s ° s ° RADIUS

(m)

2.5 74.9 100.0 77.7 68.0 2.53.0 72.5 91.5 75.9 66.8 78.1 56.7 3.03.5 70.1 82.3 73.9 64.7 76.5 53.3 78.4 44.3 3.54.0 67.6 76.7 72.0 62.1 74.9 50.1 77.0 41.1 79.3 30.7 4.04.5 65.1 66.8 70.1 59.4 73.3 47.1 75.6 38.1 78.1 29.2 4.55.0 62.6 55.6 68.1 50.0 71.7 44.8 74.3 36.2 77.0 27.6 78.9 22.3 5.06.0 57.2 40.9 64.0 37.4 68.4 34.8 71.4 32.5 74.7 24.4 76.9 21.4 78.6 19.4 6.07.0 51.5 30.3 59.8 29.2 65.0 27.5 68.6 25.9 72.4 22.2 75.0 20.5 76.9 18.6 78.4 15.7 7.08.0 45.2 22.8 55.3 22.8 61.4 22.3 65.6 21.2 70.0 20.5 73.0 19.7 75.2 17.7 76.9 15.1 8.09.0 38.0 17.9 50.6 17.9 57.8 18.1 62.6 17.6 67.6 17.3 71.0 16.8 73.5 16.3 75.4 14.4 9.0

10.0 29.1 14.3 45.5 14.4 54.0 14.6 59.5 14.8 65.2 14.7 69.0 14.4 71.7 14.1 73.9 13.7 10.011.0 15.5 11.7 39.8 11.8 50.0 12.0 56.3 12.2 62.7 12.6 66.9 12.4 70.0 12.2 72.3 12.0 11.012.0 33.3 9.7 45.7 10.0 53.0 10.2 60.1 10.8 64.8 10.8 68.2 10.7 70.8 10.5 12.013.0 25.1 8.1 41.0 8.4 49.5 8.6 57.5 9.2 62.7 9.4 66.4 9.4 69.2 9.3 13.014.0 11.9 6.8 35.8 7.1 45.8 7.3 54.8 7.9 60.5 8.2 64.6 8.3 67.6 8.2 14.015.0 29.7 6.0 41.8 6.2 51.9 6.8 58.3 7.2 62.7 7.3 66.0 7.2 15.016.0 22.1 5.1 37.5 5.3 49.0 5.9 56.0 6.3 60.8 6.4 64.4 6.4 16.017.0 8.6 4.2 32.6 4.5 45.9 5.1 53.6 5.5 58.9 5.7 62.7 5.7 17.018.0 26.9 3.8 42.7 4.4 51.2 4.8 56.9 5.0 61.0 5.0 18.019.0 19.6 3.1 39.2 3.8 48.7 4.1 54.9 4.4 59.3 4.5 19.020.0 4.7 2.7 35.4 3.2 46.0 3.6 52.8 3.8 57.6 3.9 20.021.0 31.2 2.6 43.3 3.1 50.6 3.3 55.8 3.4 21.022.0 26.4 2.1 40.4 2.6 48.4 2.9 54.0 3.0 22.023.0 20.4 1.7 37.3 2.1 46.1 2.5 52.1 2.6 23.024.0 11.6 1.3 33.9 1.7 43.7 2.1 50.2 2.2 24.025.0 30.2 1.4 41.2 1.8 48.2 1.9 25.026.0 26.0 1.1 38.6 1.5 46.2 1.6 26.027.0 21.0 0.8 35.8 1.2 44.1 1.3 27.028.0 14.2 0.5 32.8 0.9 41.9 1.1 28.029.0 29.4 0.6 39.6 0.8 29.030.0 25.7 * 37.2 0.6 30.031.0 21.4 * 34.6 * 31.032.0 15.8 * 31.8 * 32.033.0 6.2 * 28.8 * 33.034.0 25.5 * 34.035.0 21.7 * 35.036.0 17.0 * 36.037.0 10.2 * 37.0

Parts of Line

10 8 7 6 4 3 3 3 Parts of Line



21


LOAD CHARTS




TMC# 138976 - 27 - Rev 0 082411




12.8 15.7 18.6 21.5 25.9 30.3 34.7 39.0 RADIUS (m)

s ° s ° s ° s ° s ° s ° s ° s ° RADIUS

(m)

2.5 74.9 75.0 77.7 51.0 2.53.0 72.5 68.6 75.9 50.1 78.1 42.0 3.03.5 70.1 61.7 73.9 48.5 76.5 39.5 78.4 32.3 3.54.0 67.6 57.5 72.0 46.6 74.9 37.1 77.0 30.0 79.3 22.1 4.04.5 65.1 54.5 70.1 44.5 73.3 34.9 75.6 27.8 78.1 21.1 4.55.0 62.6 46.5 68.1 41.1 71.7 33.2 74.3 26.5 77.0 19.9 78.9 15.8 5.06.0 57.2 35.2 64.0 31.6 68.4 29.0 71.4 24.1 74.7 17.5 76.9 15.2 78.6 14.3 6.07.0 51.5 27.8 59.8 25.2 65.0 23.4 68.6 21.5 72.4 16.0 75.0 14.6 76.9 13.7 78.4 12.2 7.08.0 45.2 22.6 55.3 20.6 61.4 19.3 65.6 17.8 70.0 14.8 73.0 14.0 75.2 13.0 76.9 11.7 8.09.0 38.0 17.6 50.6 17.1 57.8 16.1 62.6 14.9 67.6 14.1 71.0 13.4 73.5 12.2 75.4 11.2 9.0

10.0 29.1 14.1 45.5 14.3 54.0 13.6 59.5 12.5 65.2 12.3 69.0 12.0 71.7 11.3 73.9 10.7 10.011.0 15.5 11.4 39.8 11.7 50.0 11.6 56.3 10.7 62.7 10.6 66.9 10.4 70.0 10.1 72.3 9.7 11.012.0 33.3 9.6 45.7 9.9 53.0 9.1 60.1 9.1 64.8 9.0 68.2 8.8 70.8 8.6 12.013.0 25.1 8.0 41.0 8.4 49.5 7.8 57.5 7.9 62.7 7.9 66.4 7.7 69.2 7.6 13.014.0 11.9 6.7 35.8 7.1 45.8 6.6 54.8 6.8 60.5 6.9 64.6 6.8 67.6 6.7 14.015.0 29.7 6.0 41.8 5.7 51.9 5.9 58.3 6.0 62.7 6.0 66.0 5.9 15.016.0 22.1 5.1 37.5 4.8 49.0 5.1 56.0 5.2 60.8 5.2 64.4 5.2 16.017.0 8.6 4.2 32.6 4.1 45.9 4.4 53.6 4.5 58.9 4.6 62.7 4.6 17.018.0 26.9 3.5 42.7 3.7 51.2 3.9 56.9 4.0 61.0 4.0 18.019.0 19.6 2.8 39.2 3.2 48.7 3.4 54.9 3.5 59.3 3.5 19.020.0 4.7 2.4 35.4 2.7 46.0 2.9 52.8 3.0 57.6 3.0 20.021.0 31.2 2.2 43.3 2.4 50.6 2.6 55.8 2.6 21.022.0 26.4 1.8 40.4 2.0 48.4 2.2 54.0 2.2 22.023.0 20.4 1.5 37.3 1.6 46.1 1.8 52.1 1.9 23.024.0 11.6 1.1 33.9 1.3 43.7 1.5 50.2 1.6 24.025.0 30.2 1.0 41.2 1.2 48.2 1.3 25.026.0 26.0 0.7 38.6 0.9 46.2 1.0 26.027.0 21.0 0.5 35.8 0.6 44.1 0.7 27.028.0 14.2 * 32.8 * 41.9 0.5 28.029.0 29.4 * 39.6 * 29.030.0 25.7 * 37.2 * 30.031.0 21.4 * 34.6 * 31.032.0 15.8 * 31.8 * 32.033.0 6.2 * 28.8 * 33.034.0 25.5 * 34.035.0 21.7 * 35.036.0 17.0 * 36.037.0 10.2 * 37.0

Parts of Line

10 8 7 6 4 3 3 3 Parts of Line



22


LOAD CHARTS




TMC# 138976 - 28 - Rev 0 082411


MAIN BOOM with TRACKS RETRACTED 16.1t COUNTERWEIGHT

MAIN BOOM LENGTH (m)

12.8 15.7 18.6 21.5 25.9 30.3 34.7 39.0 RADIUS (m)

s ° s ° s ° s ° s ° s ° s ° s ° RADIUS

(m)

2.5 74.9 * 77.7 * 2.53.0 72.5 * 75.9 66.8 78.1 56.7 3.03.5 70.1 70.7 73.9 64.7 76.5 53.3 78.4 44.3 3.54.0 67.6 59.2 72.0 54.8 74.9 50.1 77.0 41.1 79.3 30.7 4.04.5 65.1 50.7 70.1 47.1 73.3 44.2 75.6 38.1 78.1 29.2 4.55.0 62.6 44.1 68.1 41.2 71.7 38.7 74.3 36.2 77.0 27.6 78.9 22.3 5.06.0 57.2 33.7 64.0 32.4 68.4 30.6 71.4 28.7 74.7 24.4 76.9 21.4 78.6 20.4 6.07.0 51.5 26.3 59.8 25.8 65.0 24.9 68.6 23.3 72.4 22.2 75.0 20.5 76.9 19.6 78.4 17.5 7.08.0 45.2 21.2 55.3 20.8 61.4 20.5 65.6 19.3 70.0 19.3 73.0 19.1 75.2 18.6 76.9 16.7 8.09.0 38.0 17.5 50.6 17.1 57.8 16.8 62.6 16.2 67.6 16.4 71.0 16.3 73.5 16.2 75.4 15.8 9.0

10.0 29.1 14.7 45.5 14.3 54.0 14.1 59.5 13.6 65.2 14.0 69.0 14.1 71.7 14.0 73.9 13.8 10.011.0 15.5 12.5 39.8 12.1 50.0 11.9 56.3 11.4 62.7 12.0 66.9 12.2 70.0 12.2 72.3 12.1 11.012.0 33.3 10.4 45.7 10.1 53.0 9.6 60.1 10.4 64.8 10.6 68.2 10.7 70.8 10.6 12.013.0 25.1 8.9 41.0 8.7 49.5 8.1 57.5 8.9 62.7 9.3 66.4 9.4 69.2 9.4 13.014.0 11.9 7.6 35.8 7.4 45.8 6.8 54.8 7.7 60.5 8.1 64.6 8.3 67.6 8.3 14.015.0 29.7 6.3 41.8 5.7 51.9 6.6 58.3 7.1 62.7 7.3 66.0 7.3 15.016.0 22.1 5.3 37.5 4.8 49.0 5.6 56.0 6.2 60.8 6.5 64.4 6.5 16.017.0 8.6 4.5 32.6 3.9 45.9 4.8 53.6 5.4 58.9 5.7 62.7 5.8 17.018.0 26.9 3.2 42.7 4.1 51.2 4.6 56.9 5.1 61.0 5.1 18.019.0 19.6 2.5 39.2 3.4 48.7 4.0 54.9 4.4 59.3 4.5 19.020.0 4.7 2.4 35.4 2.8 46.0 3.4 52.8 3.8 57.6 4.0 20.021.0 31.2 2.3 43.3 2.9 50.6 3.3 55.8 3.5 21.022.0 26.4 1.8 40.4 2.4 48.4 2.8 54.0 3.0 22.023.0 20.4 1.4 37.3 2.0 46.1 2.4 52.1 2.6 23.024.0 11.6 1.0 33.9 1.6 43.7 2.0 50.2 2.2 24.025.0 30.2 1.2 41.2 1.7 48.2 1.9 25.026.0 26.0 0.9 38.6 1.3 46.2 1.5 26.027.0 21.0 0.6 35.8 1.0 44.1 1.2 27.028.0 14.2 * 32.8 0.8 41.9 0.9 28.029.0 29.4 0.5 39.6 0.7 29.030.0 25.7 * 37.2 0.5 30.031.0 21.4 * 34.6 * 31.032.0 15.8 * 31.8 * 32.033.0 6.2 * 28.8 * 33.034.0 25.5 * 34.035.0 21.7 * 35.036.0 17.0 * 36.037.0 10.2 * 37.0

Parts of Line

10 8 7 6 4 3 3 3 Parts of Line



23


LOAD CHARTS




TMC# 138976 - 30 - Rev 0 082411




12.8 15.7 18.6 21.5 25.9 30.3 34.7 39.0 RADIUS (m)

s ° s ° s ° s ° s ° s ° s ° s ° RADIUS

(m)

2.5 74.9 * 77.7 * 2.53.0 72.5 * 75.9 64.9 78.1 56.7 3.03.5 70.1 60.6 73.9 54.6 76.5 49.8 78.4 44.3 3.54.0 67.6 51.6 72.0 46.9 74.9 43.0 77.0 39.7 79.3 30.7 4.04.5 65.1 44.7 70.1 40.8 73.3 37.6 75.6 34.9 78.1 29.2 4.55.0 62.6 39.2 68.1 35.9 71.7 33.2 74.3 30.9 77.0 27.6 78.9 22.3 5.06.0 57.2 29.6 64.0 28.6 68.4 26.6 71.4 24.8 74.7 24.1 76.9 21.4 78.6 19.4 6.07.0 51.5 23.0 59.8 22.5 65.0 21.7 68.6 20.3 72.4 20.0 75.0 19.4 76.9 18.6 78.4 15.7 7.08.0 45.2 18.4 55.3 18.0 61.4 17.7 65.6 16.9 70.0 16.8 73.0 16.5 75.2 16.1 76.9 15.1 8.09.0 38.0 15.2 50.6 14.8 57.8 14.5 62.6 14.2 67.6 14.3 71.0 14.2 73.5 13.9 75.4 13.6 9.0

10.0 29.1 12.6 45.5 12.3 54.0 12.0 59.5 11.8 65.2 12.3 69.0 12.2 71.7 12.1 73.9 11.9 10.011.0 15.5 10.6 39.8 10.3 50.0 10.1 56.3 9.9 62.7 10.5 66.9 10.6 70.0 10.6 72.3 10.4 11.012.0 33.3 8.7 45.7 8.5 53.0 8.3 60.1 9.0 64.8 9.2 68.2 9.3 70.8 9.2 12.013.0 25.1 7.4 41.0 7.2 49.5 7.0 57.5 7.7 62.7 8.1 66.4 8.1 69.2 8.1 13.014.0 11.9 6.3 35.8 6.1 45.8 5.9 54.8 6.7 60.5 7.0 64.6 7.2 67.6 7.2 14.015.0 29.7 5.2 41.8 5.0 51.9 5.7 58.3 6.1 62.7 6.3 66.0 6.4 15.016.0 22.1 4.4 37.5 4.2 49.0 4.9 56.0 5.4 60.8 5.5 64.4 5.6 16.017.0 8.6 3.6 32.6 3.4 45.9 4.3 53.6 4.6 58.9 4.9 62.7 5.0 17.018.0 26.9 2.7 42.7 3.6 51.2 4.0 56.9 4.2 61.0 4.4 18.019.0 19.6 2.1 39.2 3.0 48.7 3.4 54.9 3.7 59.3 3.8 19.020.0 4.7 1.9 35.4 2.4 46.0 2.9 52.8 3.2 57.6 3.4 20.021.0 31.2 1.9 43.3 2.5 50.6 2.7 55.8 2.9 21.022.0 26.4 1.5 40.4 2.0 48.4 2.3 54.0 2.5 22.023.0 20.4 1.1 37.3 1.7 46.1 1.9 52.1 2.1 23.024.0 11.6 0.7 33.9 1.3 43.7 1.6 50.2 1.8 24.025.0 30.2 1.0 41.2 1.3 48.2 1.5 25.026.0 26.0 0.7 38.6 1.0 46.2 1.2 26.027.0 21.0 * 35.8 0.7 44.1 0.9 27.028.0 14.2 * 32.8 * 41.9 0.7 28.029.0 29.4 * 39.6 * 29.030.0 25.7 * 37.2 * 30.031.0 21.4 * 34.6 * 31.032.0 15.8 * 31.8 * 32.033.0 6.2 * 28.8 * 33.034.0 25.5 * 34.035.0 21.7 * 35.036.0 17.0 * 36.037.0 10.2 * 37.0

Parts of Line

10 8 7 6 4 3 3 3 Parts of Line



24


LOAD CHARTS




TMC# 138976 - 49 - Rev 0 082411


AUXILIARY NOSE SHEAVE with TRACKS RETRACTED 16.1t COUNTERWEIGHT

MAIN BOOM LENGTH (m)

12.8 15.7 18.6 21.5 25.9 30.3 34.7 39.0 RADIUS (m)

s ° s ° s ° s ° s ° s ° s ° s ° RADIUS

(m)

2.5 74.9 * 77.7 * 2.53.0 72.5 * 75.9 8.2 78.1 8.2 3.03.5 70.1 8.2 73.9 8.2 76.5 8.2 78.4 8.2 3.54.0 67.6 8.2 72.0 8.2 74.9 8.2 77.0 8.2 79.3 8.2 4.04.5 65.1 8.2 70.1 8.2 73.3 8.2 75.6 8.2 78.1 8.2 4.55.0 62.6 8.2 68.1 8.2 71.7 8.2 74.3 8.2 77.0 8.2 78.9 8.2 5.06.0 57.2 8.2 64.0 8.2 68.4 8.2 71.4 8.2 74.7 8.2 76.9 8.2 78.6 8.2 6.07.0 51.5 8.2 59.8 8.2 65.0 8.2 68.6 8.2 72.4 8.2 75.0 8.2 76.9 8.2 78.4 8.2 7.08.0 45.2 8.2 55.3 8.2 61.4 8.2 65.6 8.2 70.0 8.2 73.0 8.2 75.2 8.2 76.9 8.2 8.09.0 38.0 8.2 50.6 8.2 57.8 8.2 62.6 8.2 67.6 8.2 71.0 8.2 73.5 8.2 75.4 8.2 9.0

10.0 29.1 8.2 45.5 8.2 54.0 8.2 59.5 8.2 65.2 8.2 69.0 8.2 71.7 8.2 73.9 8.2 10.011.0 15.5 8.2 39.8 8.2 50.0 8.2 56.3 8.2 62.7 8.2 66.9 8.2 70.0 8.2 72.3 8.2 11.012.0 33.3 8.2 45.7 8.2 53.0 8.2 60.1 8.2 64.8 8.2 68.2 8.2 70.8 8.2 12.013.0 25.1 8.2 41.0 8.2 49.5 8.0 57.5 8.2 62.7 8.2 66.4 8.2 69.2 8.2 13.014.0 11.9 7.5 35.8 7.3 45.8 6.7 54.8 7.6 60.5 8.0 64.6 8.2 67.6 8.2 14.015.0 29.7 6.2 41.8 5.6 51.9 6.5 58.3 7.0 62.7 7.2 66.0 7.2 15.016.0 22.1 5.2 37.5 4.7 49.0 5.5 56.0 6.1 60.8 6.4 64.4 6.4 16.017.0 8.6 4.4 32.6 3.8 45.9 4.7 53.6 5.3 58.9 5.6 62.7 5.7 17.018.0 26.9 3.1 42.7 4.0 51.2 4.5 56.9 5.0 61.0 5.0 18.019.0 19.6 2.4 39.2 3.3 48.7 3.9 54.9 4.3 59.3 4.4 19.020.0 4.7 2.3 35.4 2.7 46.0 3.3 52.8 3.7 57.6 3.9 20.021.0 31.2 2.2 43.3 2.8 50.6 3.2 55.8 3.4 21.022.0 26.4 1.7 40.4 2.3 48.4 2.7 54.0 2.9 22.023.0 20.4 1.3 37.3 1.9 46.1 2.3 52.1 2.5 23.024.0 11.6 0.9 33.9 1.5 43.7 1.9 50.2 2.1 24.025.0 30.2 1.1 41.2 1.6 48.2 1.8 25.026.0 26.0 0.8 38.6 1.2 46.2 1.4 26.027.0 21.0 0.5 35.8 0.9 44.1 1.1 27.028.0 14.2 * 32.8 0.7 41.9 0.8 28.029.0 29.4 * 39.6 0.6 29.030.0 25.7 * 37.2 * 30.031.0 21.4 * 34.6 * 31.032.0 15.8 * 31.8 * 32.033.0 6.2 * 28.8 * 33.034.0 25.5 * 34.035.0 21.7 * 35.036.0 17.0 * 36.037.0 10.2 * 37.0

Parts of Line

1 1 1 1 1 1 1 1 Parts of Line



25


LOAD CHARTS



360 DEGREE RATING - LOADS IN kg x 1000

MANTIS Model GTC-1000EX LOAD CHART 39.0m BOOM

TMC# 138976 - 52 - Rev 0 082411

CHARTS #43 & 44 NO TRAVEL – LEVEL 0°TO 2°

10.7m EXTENSION & 7.6m JIB with TRACKS FULLY EXTENDED

16.1t COUNTERWEIGHT

10.7m EXTENSION 7.6m JIB

Total Boom Length Jib Offset Angles BoomAngle

23.5m to 45.7m > 45.7m 0° 15° 30°

BoomAngle

80º11.3† 11.3† 5.4 3.3 1.8

80º

78º8.6† 8.6† 5.3 3.1 1.7

78º

75º7.3 7.3 4.6 2.9 1.6

75º

72º6.4 6.4 4.2 2.6 1.6

72º

70º5.6 5.6 3.8 2.5 1.5

70º

68º5 5 3.4 2.3 1.5

68º

65º4.5 4.5 3.2 2.1 1.4

65º

62º4.2 4.2 2.9 2 1.4

62º

60º3.9 3.9 2.6 1.6 1.1

60º

58º3.7 3.7 2.1 1.1 0.8

58º

55º3.4 3.4 1.6 0.5 0.3

55º

52º3.2 3.2 1.1 * *

52º

50º3.1 3.1 0.9 * *

50º

48º2.9 2.8

48º

45º2.7 2.3

45º

Notes: 1. Capacities followed by † require 2 part reeving. 2. Capacities appearing above the bold line are based on structural strength. Capacities appearing below the

bold line are based on stability and do not exceed 75% of tipping. 3. During operation the wind speed must not exceed 36 km/hr. 4. Never use jib or extension with counterweights installed. 5. An * on the chart indicates positions without rated loads. These areas are susceptible to instability either in

the forward direction or the backwards direction. Even without a load, the boom should not be positioned in these specific configurations of the load chart to avoid tipping. Warning: All stowed load handling devices are considered loads. See deduction chart for values.

26


LOAD CHARTS



360 DEGREE RATING - LOADS IN kg x 1000

MANTIS Model GTC-1000EX LOAD CHART 39.0m BOOM

TMC# 138976 - 53 - Rev 0 082411

CHARTS #45 & 46 TRAVEL SPEEDS UP TO 1.0 km/h – LEVEL 0°TO 2°

10.7m EXTENSION & 7.6m JIB with TRACKS FULLY EXTENDED

16.1t COUNTERWEIGHT

10.7m EXTENSION 7.6m JIB

Total Boom Length Jib Offset Angles BoomAngle

23.5m to 45.7m > 45.7m 0° 15° 30°

BoomAngle

80º11.3† 11.3† 5.4 3.3 1.8

80º

78º8.6† 8.6† 5.3 3.1 1.7

78º

75º7.3 7.3 4.6 2.9 1.6

75º

72º6.4 6.4 4.2 2.6 1.6

72º

70º5.6 5.6 3.8 2.5 1.5

70º

68º5 5 3.4 2.3 1.5

68º

65º4.5 4.5 3.2 2.1 1.4

65º

62º4.2 4.2 2.9 2 1.4

62º

60º3.9 3.9 2.6 1.6 1.1

60º

58º3.7 3.7 2.1 1.1 0.8

58º

55º3.4 3.4 1.6 0.5 0.3

55º

52º3.2 3.1 1.1 * *

52º

50º3.1 2.8 0.9 * *

50º

48º2.9 2.5

48º

45º2.7 2.0

45º

Notes: 1. Capacities followed by † require 2 part reeving. 2. Capacities appearing above the bold line are based on structural strength. Capacities appearing below the

bold line are based on stability and do not exceed 66.6% of tipping. 3. During operation the wind speed must not exceed 36 km/hr. 4. Never use jib or extension with counterweights installed. 5. An * on the chart indicates positions without rated loads. These areas are susceptible to instability either in

the forward direction or the backwards direction. Even without a load, the boom should not be positioned in these specific configurations of the load chart to avoid tipping. Warning: All stowed load handling devices are considered loads. See deduction chart for values.

27


PLease Read, UndeRstand, and FOLLOW the ManUaLs FURnished With the cRane (OPeRatORs and saFety) as WeLL as the caPacity LiMitatiOns and geneRaL cOnditiOns Listed beLOW PRiOR tO

OPeRatiOn OF the cRane. FaiLURe tO dO sO May ResULt in an accident.

tadanO Mantis gtc-1000exWIRE ROPE LINE PULL CAPACITIES

PaRts OF Line

Main Winch(kN)

aUx Winch(kN)

PaRts OF Line

Main Winch(kN)

1 101.8 101.8 6 570.1

2 197.6 197.6 7 658.7

3 293.5 N/A 8 745.6

4 387.5 N/A 9 830.7

5 479.7 N/A 10 914.2

22mmdiameterwirerope,35x7,RotationResistant

This Mantis cRane as manufactured by tadano Mantis corporation meets the requirements of as 1418.5-2002. Structure and stability have been tested in accordance with this standard. Lifting capacities as determined by boom length, angle or radius, apply only to machines as originally equipped by manufacturer and in a properly maintained condition. Capacities given are maximum covered by the manufacturers warranty and are based on a freely suspended load with nOallowanceforfactorsasout-of-leveloperation(beyondthelimitsspecifiedonthecharts), supporting surface conditions, hazardous surroundings, experience of personnel, etc. The operator shall establish practical working loads based on prevailing operating conditions, such as, but not limited to the above.

When making lifts where capacities may be within a zone limited by structural strength, the operator shall determine that the weight of the load is known within plus or minus (+/-) ten percent (10%) before making lift. dO nOt lift load or extend boom without counterweight in place. Deduc-tions from rated capacities must be made for the weight of the hook block, hook/ball, slings, spreader bar, or other suspended equipment.

Side pull on boom is extremely dangerous and must be avoided.

dO nOtexceedmanufacturersmaximumspeci

gtc-1000ex · gtc-1000ex 100t telescopic boom crawler crane general data crane capacity 100t at...

Documents