grundfos - ghaem1995.irghaem1995.ir/files/ghaem-biz/catalogue/grundfos.pdf · grundfos aerojet...
TRANSCRIPT
GRUNDFOS
AeroJet
Self-aspirating aerator that keeps aerobic treatment processes running
ALPHA1
GRUNDFOS ALPHA1 is a complete range of circulator pumps. The pumps are energy-
optimised and comply with the requirements of the EuP directive EuP 2015.
ALPHA2
ALPHA2 is the best pump to withstand the tough conditions in a heating system, and with four
newly added features, it just got even tougher
ALPHA2 L OEM
The ALPHA2 L variant features integrated differential-pressure control, enabling adjustment of
pump performance to the actual system requirements. The installation of a GRUNDFOS
ALPHA2 L pump will reduce the power consumption considerably, reduce noise from
thermostatic valves and similar fittings, and improve the control of the system.
AMD-AMG-AFG
Mixers and flowmakers
APG
For the pumping of sewage and wastewater containing destructible solids.
GRUNDFOS
AQtap
Grundfos AQtap is an intelligent water dispenser that addresses some of the main challenges of
providing reliable and sustainable water supply in the developing world.
BM
Grundfos BM booster modules
BME
High pressure booster system
BMET System
Grundfos multi-stage submersible pump
BMEX
Booster systems for energy recovery in seawater reverse osmosis (SWRO) sysstems
BMP – booster module piston pumps
Grundfos BMP, booster module piston pumps.
GRUNDFOS
BMS
The BMS range is a completely new range of booster modules mainly used for reverse osmosis
and (ultra-)filtration applications that improve efficiency compared to earlier ranges.
CIM/CIU
The CIM and CIU enable the connection of Grundfos electronic products to standard fieldbus
networks.
CM, CME
The Grundfos CM and CME pumps are non-self-priming, horizontal, multistage, end-suction
centrifugal pumps.
CM, CME Booster
Modern technologies have brought a high degree of comfort to people within their homes by
providing a strong water supply. Grundfos offers complete tailored pressure boosting systems for
domestic water supply that ensure optimal water pressure for household applications.
CMV
Multistage centrifugal pumps
COMFORT
A complete range of circulator pumps designed for hot water recirculation systems
GRUNDFOS
Conex DIA-1, DIA-2, DIA-2Q
Conex DIA-1, DIA-2, DIA-2Q - Measuring amplifiers and controllers
Conex DIA-G
Dosing Instrumentation Advanced-Gas
Conex DIS-C
Dosing Instrumentation Standard
Conex DIS-G
Dosing Instrumentation Standard-Gas
Conlift
Condensate pumps designed for long life and silent operation
Control MPC
Grundfos Control MPC is a control cabinet with a CU 352 controller that permits monitoring and
control of up to six identical pumps connected in parallel.
GRUNDFOS
CR, CRE Monitor
CR/CRE monitor – Monitoring of pump efficiency, cavitation and performance
CR, CRE, CRN, CRNE, CRI, CRIE, CRT, CRTE
Multistage pumps for pressure boosting in a wide range of applications
CRFlex
Grundfos solar surface pumps provide the perfect sustainable, reliable and cost efficient
alternative to irregular water supply solutions in remote locations, or for highly specific
applications anywhere.
CUE
Frequency converter for pumps
Dedicated Controls
Advanced pump controller for wastewater pumping stations
Diffuser
Diffused aeration systems
GRUNDFOS
Digital dosing, DDI
Grundfos DDI pumps provide Digital Dosing from 75 ml/h up to 150 l/h with real setting of the
flow rate.
Digital dosing, DME
The DME/DMS/DDI dosing pumps are designed for handling chemicals
Digital dosing, DME
Grundfos DME Digital Dosing pumps combine perfect precision with user-friendliness, covering
large dosing quantities in the range from 60 l/h to 940 l/h with few variants.
DIP
Dosing Instrumentation Pool
Direct Sensors™
DIT-L, DIT-M Photometer
DIT-L and DIT-M Photometers
DMH
The Grundfos DMH range is a series of extremely strong, robust pumps for applications
requiring a reliable dosing and high-pressure capability, such as process engineering.
GRUNDFOS
DMX
The Grundfos DMX range has proven its worth in dosing applications worldwide. With their
robust diaphragm-based design and their high-quality motors DMX pumps require minimum
maintenance and are best choice for many dosing applications.
Dosing tank stations
DP
For pumping drain water and groundwater from around housing, farms and small industrial
plants.
DPK
Submersible Pumps
DW
Submersible light-weight contractor pumps for dewatering and drainage applications
DWK
Submersible Pumps
EF
EF pumps are designed for pumping wastewater (excluding toilet waste) from private dwellings
GRUNDFOS
Fire systems
Horizontal single-stage fire pumps – NKF and NBF
Grundfos GO
Grundfos GO is the mobile tool box for professional users on the go. It is the most
comprehensive platform for mobile pump control and pump selection including sizing,
replacement and documentation.
Grundfos Remote Management
A secure, internet-based system for monitoring and managing pump installations.
GT
GT diaphragm and bladder pressure tanks are suitable for domestic and industrial applications
HS
Split case, single-stage, non-self-priming, centrifugal, double volute pumps
Hydro MPC
The Grundfos Hydro MPC booster systems are made to the very highest standards. Thanks to the
CU 352 controller, they handle even the most difficult boosting jobs with ease and accuracy.
GRUNDFOS
Hydro Multi-E
An innovative pressure booster system specially designed for building service applications.
Hydro Multi-S
Complete booster system
IO 111
Signal converter module used for converting sensor signals from Grundfos S pumps.
JP
Self-priming pump for home and garden
JP Booster
Water supply systems
JPC, JPC-PT
Grundfos JPC and JPC-PT pumps are cost-efficient self-priming, single-stage jet pumps,
covering a wide variety of domestic water transfer and supply jobs.
GRUNDFOS
KPBasic
KPL Axial Flow Propeller Pump
KPL Axial Flow propeller pump
KWM Mixed Flow Pump
KWM Mixed flow pump
LC-LCD
Basic pump controller for wastewater pumping stations.
Liftaway
Grundfos LIFTAWAY is a compact lifting station for grey wastewater.
MAGNA/UPE
Small, medium and large circulator pumps fitted with communication equipment and
electronically speed-controlled motor
MAGNA1
The MAGNA1 circulator pumps are designed for circulating liquids in heating systems with
variable flows where it is desirable to optimise the setting of the pump duty point, thus reducing
energy costs.
GRUNDFOS
MAGNA3
The MAGNA3/UPE pumps make up a broad range of small, medium and large circulator pumps
– all fitted with communication equipment and state-of-the-art motors
MP 1
MP 1 Environmental pumps for water quality monitoring
MP204
The MP204 is an electronic motor protector, designed for the protection of an asynchronous
motor or a pump
MQ
Compact water supply system designed for domestic, agricultural and horticultural applications
MTR/SPK/MTH/MTA
Coolant and condensate pumps
MULTILIFT
Lifting stations for collecting and removing wastewater
NB, NBG, NBE, NBGE
A complete range of non-self-priming, single-stage, centrifugal volute pumps.
GRUNDFOS
NK, NKG, NKE, NKGE
Grundfos offers a virtually limitless range of long-coupled (NK) end-suction pumps
Oxiperm 164/166
An ideal means of ensuring the cleanliness of drinking water is to use chlorine dioxide (ClO2) as
a disinfectant. Chlorine dioxide is highly effective against all types of germs and has a long
residual time in the system, meaning that it disinfects even without extracting water.
Oxiperm Pro OCD-162
Chlorine dioxide generator with integrated dosing for water disinfection
PM Rain
The Grundfos PM Rain is an interconnect device that allows you to utilise harvested rainwater
for toilet, laundry and garden applications, with the added benefit of mains water back-up.
PM1, PM2 Pressure Managers
Pressure Manager
Polydos
The Polydos product is a range of simple and flexible as well as economic and efficient
preparation systems for polymers.
GRUNDFOS
POMONA
Self-priming transportable dewatering and drainage pumps with electric or diesel engine motors
R100
The Grundfos R100 remote control is designed for wireless IR communication
RainJets
The RainJet is a hydroejector designed to clean tanks used for the temporary storage of
stormwater or wastewater.
RMQ
Rainwater units for the monitoring and control of rainwater systems according to EN 1717
S pump
Pumping of raw water, unscreened raw sewage, water containing sludge, industrial effluent
SB and SBA
The SB and SBA pump is a submersible booster pump for the pumping of clean water.
GRUNDFOS
SE 1.1-11 kW
Drainage, effluent and sewage pumps
SE and SL 9-30 kW
The SE and SL ranges of wastewater pumps provide the highest total efficiency on the market.
Innovative technologies from Grundfos bring together intelligence, motors, hydraulics and
functionality to meet the challenges of modern wastewater, maximising the hydraulic, electrical
and mechanical efficiency of your pumps.
SEG
SEG pumps designed for pumping effluent and untreated sewage in small communities
Selcoperm 125 - 2000
Safe and simple electrolytic production of hypochlorite solution for disinfection applications
SL 0.9-11 kW
Drainage, effluent and sewage pumps
SMART Digital, DDA, DDC, DDE
Intelligent dosing pumps with new drive and adjustment mechanisms represent the ideal solution
for increasingly complex dosing.
GRUNDFOS
Solar PM2 OEM
The Grundfos Solar PM2 is energy optimized for small and medium solar thermal charging
station in which the demand is mainly on small reduced flow.
SOLAR PML OEM
The Grundfos SOLAR PML is energy optimized for small and medium solar thermal charging
station in which the demand is mainly on small reduced flow.
SOLOLIFT2
A unique range of compact lifting stations
SP
Submersible pumps for irrigation, water supply, pressure boosting and dewatering.
SPO
Water supply pumps approved for drinking water.
SQ
Grundfos SQ/SQE pumps comprise a 3" submersible pump family with built-in electronics.
GRUNDFOS
SQFlex
Grundfos' renewable energy solution – the SQFlex submersible pumping system
SRP
Submersible recirculation pumps, SRP
TP, TPE
For air-conditioning and heating applications in commercial buildings
TPE3, TPE2
The new TPE3 is packed with a wide range of intelligent pump features and optimized
technology making it to a highly efficient In-line pump.
Unilift AP
Vertical, single-stage, submersible centrifugal pumps
Unilift CC
Single-stage submersible drainage pump designed for pumping drain water and grey wastewater.
GRUNDFOS
Unilift KP
Single-stage submersible drainage pump for pumping drain water and grey wastewater
UPM GEO OEM
The Grundfos UPM GEO is optimised for operation in condensing environments such as the
ground side of a geothermal heat pump. The circulator is specially designed for system
integration and controlled via a digital low- voltage PWM signal.
UPM2 K OEM
The Grundfos UPM2K is optimised for operation in condensing environments such as the
ground side of a geothermal heat pump. The circulator is specially designed for system
integration and controlled via a digital low- voltage PWM signal.
UPM2 OEM
The UPM2 is designed to substitute the small UPS circulator as a high-efficient circulator getting
integrated into heating end-user systems. UPM2 offers hydraulic backward compatibility with
existing platforms and covers a very broad range of operation, even down to low meter heads.
The extended performance is available.
UPM3 AUTO L OEM
UPM3 AUTO L is for all applications in which an internally controlled pump is needed. It is
designed to be used in appliances or cabinets with increased ambient temperatures and limited
space options; either in standalone applications or in kit systems without PWM controller. The
AUTO L does not feature AUTOADAPT modes.
GRUNDFOS
UPM3 AUTO OEM
UPM3 AUTO is for all applications in which an internally controlled pump is needed. It is
designed to be used in appliances or cabinets with increased ambient temperatures and limited
space options; either in standalone applications or in kit systems without PWM controller.
UPM3 FLEX AC OEM
By combining 2 PWM profiles, the UPM3 FLEX AC brings new flexibility to the system
developer, the OEM production and even to the field installation. Without changing the
hardware, the settings can easily be changed: with 4 maximum curves either for heating or PWM
profile C for solar.
UPM3 FLEX AS OEM
UPM3 FLEX AS is a flexible solution for boiler systems now and in the future. It is designed to
work both with and without PWM signal, allowing you to upgrade your systems without having
to change the circulators.
UPM3 Hybrid OEM
By combining external controlling through signal entry with internal self-controlling, the UPM3
HYBRID covers all your circulator needs in one product, providing you with access to a full
range of settings. For all kind of applications with flexible settings in OEM production or in the
installation field.
UPM3 OEM
UPM3 is the right choice for all HVAC projects and appliances produced on a big scale where
only one specific external control mode with one specific speed range is requested. UPM3 is
controlled via a signal cable entry.
GRUNDFOS
UPM3 SOLAR OEM
UPM3 SOLAR is an OEM high efficient circulator offering flexible solutions for thermal solar
systems. It is designed to work both with and without PWM signal, allowing you to upgrade your
systems without having to change the controller.
UPML GEO & UPMXL GEO OEM
The Grundfos UPML GEO & UPMXL GEO medium circulator platform is made as an extension
of the basic UPM GEO up to variable flows to 180W. This circulator pump is particularly
suitable for coldwater applications. The pump is designed to be integrated in geothermal heating
pumps as well as in heating and air-conditioning systems with remote control of the speed,
corresponding to low-voltage PWM signal input.
UPS
A complete range of 3-speed circulator pumps, available both in 50 and 60 Hz.
UPS2
UPS2 is the perfect replacement option to optimize efficiency in domestic heating systems.
Vaccuperm VGA and VGB
Chlorine gas vacuum regulators and dosing regulators for safe and accurate dosing of chlorine
gas
Wastewater pumping stations
Full range of modular pumping stations