FACULTY OF ELECTRICAL ENGINEERING

MULTIMEDIA SYSTEMS AND APPLICATIONS (ECE551)GROUP PROJECT 1 REPORT(Poster)

TITLE: SAFETY AWARENESS CAMPAIGN

NAMENO. MATRIX

MOHAMMAD ARIEF BIN MUHD BAKRI2013838072

AMMIRUL ASHRAF BIN ABD MALIK2013810152

AHMAD AIMAN BIN HASMARUDDIN2013673912

LECTURER NAMEMDM MAIZURA MOHD SANI

TABLE OF CONTENT

No. TopicPages

1.Rubics Project 21

2.Image2 - 4

3.Text

4.Background

5.Reference

RubricsProject 2

MULTIMEDIA SYSTEMS AND PRESENTATIONSECE 551Evaluation:Design Poster

CATEGORIESTOTAL MARKSMARKS OBTAINED

Banner/Poster Title Text (2m) Background (2m) Image (2m) Creative and Attractive (1m)7

Project report Content (2 m) Neat (1 m)3

TOTAL/10

Image This image was downloaded at Google image.http://howto.c1.b.cdn.hardwareandtools.net/wpcontent/uploads/2015/01/h312166_1367862889.jpg

After remove background

This image was chosen because it represented the faulty wire for our poster project tittle 1 Safety Awareness Campaign. We cut-out the background of the image to get outline of the image only by using the magic wand tool/magnetic lasso tool and click at the selected background and delete.

For the fire effect we download the image at Google image.http://www.iwebdesigner.it/wp-content/uploads/2012/06/fire-18.jpg

This image is to combine with the faulty wires image for makes it on fires.To combine it we set the blending mode for the layer to screen blend. So when combine it when other image it will blend with the image.

Then to make the fire more realistic and control the structure of the fire we used the Transform Warp. We adjust the point of the image.

After that we blend the two of the images. Just drag the fire image to the faulty wires and adjust the textures of the fire by Edit Transform Warp.

Then to makes the faulty wires more burnt we used Burn Tool and apply at the image.

This is the final images of the combination of two image faulty wires and fires.

Background Figure 1 Figure 2 Figure 3 The first step background was taken from website as figure 1 and figure 2 above. Then, it combines together as in figure 3.

Figure 4 Second step we cut-out the background of the image as figure 4 to get outline of the image only by using the magic wand tool/magnetic lasso tool and click at the selected background and delete.

Figure 5 Then we select that only part of caution section by magnetic lasso tool as in Figure 5 shows.

Figure 6

Figure 7 The Final step was finished as in figure 7. We cut image in figure 6 and paste it into final image as in figure 7 above.

Referenceshttp://my-smashing.smashingapps.netdna-cdn.com/wp-content/uploads/2012/07/iphone4wallpapers9.jpghttp://th09.deviantart.net/fs70/PRE/f/2012/224/f/8/caution_wallpaper_by_claine89-d5atyij.pnghttp://www.svetandroida.cz/media/2012/03/paper_Metallic-Background.jpghttp://www.wpclipart.com/page_frames/full_page_signs/Bold_signs/warning_sign_bold.png