ground testers - impacto-ferramentas.pt · earth ground resistance is measured by installing earth...

4

Upload: doankhanh

Post on 30-Jul-2018

215 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: Ground Testers - impacto-ferramentas.pt · Earth ground resistance is measured by installing earth ground test electrodes, and testing
Page 2: Ground Testers - impacto-ferramentas.pt · Earth ground resistance is measured by installing earth ground test electrodes, and testing

38 Earth Ground Testers

Fluke 1625-2 and 1623-2 Geo Earth Ground Testers Simpler, faster testingGrounding testers, like the Fluke 1623-2 and 1625-2, help maintain uptime and lower the risk of electric shock to users while helping solve intermittent power quality problems . The Fluke earth ground testers perform all four essential earth ground test methods that users demand:• 3- and 4-pole Fall of Potential, earth resistance loop testing• 4-pole soil resistivity testing • Selective earth ground testing using one clamp• Stakeless earth ground testing using two clamps

The 1623-2 and 1625-2 also make earth grounding tests faster and easier than previous methods because of automatic data collection and storage and faster setup . Color coded wires for easier identification and deploying of wire reels and stakes .• IP56 rated for outdoor use• USB data storage and transfer• Automatic Frequency Control (AFC)—identifies existing interference and chooses a

measurement frequency to minimize its effect, providing more accurate earth ground value• R* measurement—calculates earth ground impedance at 55 Hz to more accurately reflect the

earth ground resistance that a fault-to-earth ground would see • Adjustable limits —for quicker testing

These products are for unpowered installations measuring grounding connections .

Selection guide1630 1621 1623-2 1625-2

2-Pole (ac) resistance measurement • • •

3-Pole earth measurement • • •

Measurement frequency—128 Hz • •

4-Pole earth ground and soil resistivity measurement • •

Selective testing • •

Stakeless testing (ground loop resistance) • • •

Memory • •

USB port • •

Automatic Frequency Control (AFC) 94 Hz to 128 Hz •

R* measurement •

Adjustable limits •

Ordering informationModels Included accessories

FLUKE-1625-2 Advanced GEO Earth Ground Tester Two test leads, USB cable, batteries, quick reference guide, users manual

FLUKE-1623-2 Basic GEO Earth Ground Tester Two test leads, USB cable, batteries, quick reference guide, users manual

FLUKE-1625-2 KIT Advanced GEO Earth Ground Tester Kit Two test leads, USB cable, 2 clamps (1 source, 1 sensing),

carrying case, 4 earth ground stakes, 3 color coded cable reels, batteries, quick reference guide, users manualFLUKE-1623-2 KIT Basic GEO Earth Ground Tester Kit

Kits—buy more, save more Recommended accessories

Fluke 1625-2 KitES-162P4-2 Stake/reel set for 4-pole measurement

EI-1625 Selective/stakeless clamp set for 1625-2

EI-162BN 320 mm (12 .6 in) Split Core Transformer for use with Fluke 1625-2

Clamp-on transformer accessory for ground loop measurements on transmission pylons .

Faster setup, easier testing and deployment of wire reels and stakes .

EARTH GROUND TESTERS

Page 3: Ground Testers - impacto-ferramentas.pt · Earth ground resistance is measured by installing earth ground test electrodes, and testing

39Earth Ground Testers

Fluke 1630 Earth Ground Clamp MeterSafely measures ground loop resistanceThe Fluke 1630 Earth Ground Clamp Meter is able to measure ground loop resistances—using the stakeless testing method . This test technique eliminates the dangerous, and time consum-ing activity, of disconnecting parallel grounds . You can also perform earth ground tests: inside buildings, on power pylons or anywhere you don’t have access to soil .With the stakeless testing method, no earth ground stakes are used at all . A known voltage is induced by one half of the clamp and the current is measured by the other half . The tester auto-matically determines the ground loop resistance at this grounding connection .• Quick and easy use—no earth ground stakes are necessary• Large, 35 mm (1 .35 in) jaw opening• Measures ground resistance from 0 .025 Ω to 1500 Ω• Measures ground leakage current from 0 .2 mA to 30 A• High and low alarming• Automatic self calibration• Rugged carrying case and resistance check loop included• Two-year warranty• CAT III 300 V, CAT II 600

Fluke 1621 Basic Earth Ground TesterEarth ground tester for resistance measurement The Fluke 1621 Earth Ground Tester is a rugged, easy-to-use tester for three-pole ground resistance measurements and two-pole ac resistance measurements .Earth ground resistance is measured by installing earth ground test electrodes, and testing . With a simple user interface and intuitive functionality, the large, clear LCD display provides high visibility results in daylight or poor lighting conditions . • Three-pole earth resistance measurements• Two-pole AC resistance measurements• Large dual backlit display• Limit settings for automatic measurement evaluation• CAT II 600 V• Two-year warranty

Kits—buy more, save more Recommended accessories

Fluke 1621 Tester

Cable Reel 50 m Ground/earth wire (162 .5 ft) for 1621

Cable Reel 25 m Ground/earth wire (81 .25 ft) for 1621

ES-162P3 Stake/reel set for 3-pole measurements for 1621

Ordering informationModels Included accessories

FLUKE-1621 Basic Earth Ground Tester Two measuring leads with alligator clips, 2 m (6 ft), yellow protective holster, 9 V alkaline battery (LR61), users manual, CD

Ordering informationModels Included accessories

FLUKE-1630 Earth Ground Clamp Meter Rugged carrying case with belt, resistance test loop, 9 V battery, users manual

Take leakage current or ground measurements on grounding systems with multiple parallel grounding electrodes (transformers, utility grounds, transmission tower grounds, and communication ground systems) .

EARTH GROUND TESTERS

Page 4: Ground Testers - impacto-ferramentas.pt · Earth ground resistance is measured by installing earth ground test electrodes, and testing

Fluke. Keeping your world up and running.®

We’re listeningFluke has always listened to our customers and built the tools you want. Our ideas and the things that drive our intense development process, come straight from the job site and pros like you. Help us keep innovating, share your thoughts with us and with your peers. Visit our social media sites, tell us your ideas, tell us your stories, tell us what you think.

Your authorized Fluke distributor

Fluke Connect®Digital MultimetersClamp MetersElectrical TestersBattery TestersInsulation TestersEarth Ground TestersInstallation TestersPortable Appliance TestersDigital ThermometersThermal ImagersDistance MetersIndoor Air Quality ToolsScopeMeter® Test ToolsPower Quality ToolsVisual Infrared ThermometersField CalibratorsVibration TesterRadiation TesterEX Test ToolsAccessories

Contact us:Fluke (UK) Ltd.52 Hurricane WayNorwichNorfolkNR6 6 JBUnited KingdomTel.: +44 (0)20 7942 0700Fax.: +44 (0)20 7942 0701E-mail: [email protected]: www.fluke.co.ukFluke CorporationP.O. Box 9090Everett, WA USA 98206Web: www.fluke.comFluke Europe B.V.P.O. Box 11865602 BD EindhovenThe NetherlandsWeb: www.fluke.comFor more information call:In the U.S.A. (800) 443-5853or Fax (425) 446-5116In Europe/M-East/AFrica +31 (0)40 2 675 200)or Fax +31 (0)40 2 675 222In Canada (905) 890-7600or Fax (905) 890-6866From other countries +1 (425) 446-5500or Fax +1 (425) 446-5116

©2003-2016 Fluke Corporation. Specifications subject to change without notice. Microsoft is a registered trademark of Microsoft Corporation. Printed in U.S.A. 9/2016 6008344a-uken Volume 47, Edition 1

Modification of this document is not permitted without written permission from Fluke Corporation.