grooved fittings

Copyright © 2011 Tyco International Ltd. / Printed in USAGM-AP-2011-001-00

ASIA PACIFIC / January 2011

India804,Windsor, Off CST Road, Kalina, Santacruz (East), Mumbai – 400098, IndiaPhone:+91-22-61310600 Fax : +91-22-67417405 E-mail: [email protected]

ShanghaiBuilding No.1, Lane 955, Jinhai Road Pudong, Shanghai 201206, P.R.C.T: +86 21 61633373 F: +86 21 61633371 E-mail: [email protected]

Hong KongPhase 1, 10/F, Goodman Shatin Logistics Centre No.6 Wong Chuk Yeung Street Fotan, Shatin Hong KongT: 852-2595-0686 Fax:852-2505-5826 E-mail: [email protected]

Singapore2 Serangoon North Avenue 5, #07-01 Fu Yu Building, Singapore 554911 Tel : +65 6577 4360 Fax: +65 6481 8791 E-mail: [email protected]

Australia567 Somerville Road SUNSHINE VIC 3020 AUSTRALIATel: 1300 725 688 (within Australia) Tel: +61 3 9933 6200 Fax +61 3 9933 6204 E-mail: [email protected]

Making Connections…Building Solutions.

2 www.grinnell.com

TABLE OF CONTENTSGe

nera

l Dat

a General Data Section . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 – 14Why Grooved? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8Why GRINNELL? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9Product Features and Benefits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10Agency Listings and Approvals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11General Code Groups, Associations, Laboratories & Approval Bodies . . . . . . . . . . . . . . . . . . . . . . . . . 11Government Agencies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11Product Design and Testing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12ISO 9001:2000 Certified . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13GRINNELL Website . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Grooved Couplings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 – 32Grooved Couplings Pictorial Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16Coupling Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17Figure 772 Rigid Couplings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 - 19Figure 707 Heavy Duty Flexible Couplings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 - 21 Figure 705 Flexible Couplings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22Figure 770 High Pressure Rigid Couplings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23Figure 716 Flexible Reducing Couplings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24Figure 780 Grooved Snap Couplings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25Figure 702 Mechanical Outlet Couplings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 - 27Figure 71 Flange Adapters (ANSI Class 125/150) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 - 29Figure 71 Flange Adapters (PN10/PN16) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 - 31Figure 71 Flange Adapters (AS2129 Table E) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

Grooved Fittings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 – 72Grooved Fittings Pictorial Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34Fittings Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35Figure 210 90° Cast Elbows . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36Figures 210LR & 310LR 90° Long Radius Elbows . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36Figure 201 45° Cast Elbows . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37Figures 201LR & 301LR 45° Long Radius Elbows . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37Figures 212 & 312 22-1⁄2° Elbows . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38Figures 211 & 311 11-1⁄4° Elbows . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39Figure 315 Groove x Male Thread 90° Elbows . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40Figure 316 Reducing Base Support Elbow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40Long Radius 3D Elbows . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41Long Radius 5D Elbows . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42Long Radius 6D Elbows . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43Figures 219 & 319 Tees . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44Figure 320 Groove x Groove x Male Thread Tees . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45Figures 221 & 321 Reducing Tees . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46 - 48Figure 323 Groove x Groove x Male Thread Reducing Tees . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49 - 50Figures 250 & 350 Concentric Reducers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51 - 54Figures 251 & 351 Eccentric Reducers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55 - 57Figure 372 Reducers, Small End Threaded (Male) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58Figure 395 Hose Adapter Nipples, Groove x Hose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59Figure 380 Female Thread Adapters Groove x Female Thread . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59Figures 391, 392 & 393 Adapter Nipples . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60Figures 397, 398 & 399 Swaged Nipples . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61Figure 324 90° True Wyes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62Figure 314 45° Laterals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63Figure 325 45° Reducing Laterals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64 - 65Figure 330 Tee Wyes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66 - 67Figure 331 Reducing Tee Wyes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68Figures 227 Cast & 327 Fabricated Crosses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69Figures 260 & 360 End Caps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70Figure 341 Flange Adapters (ANSI Class 150#) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71Figure 342 Flange Adapters (ANSI Class 300#) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71Figures 407GT & 407T Dielectric Waterways . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72

3

TABLE OF CONTENTS

Refer to back cover for country-specific customer care numbers.

Gene

ral D

ataMechanical Tees . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73 – 80

Mechanical Tees Pictorial Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74Mechanical Tees Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74Figure 730 Mechanical Tees & Crosses – Threaded . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75 - 77Figure 730 Mechanical Tees & Crosses – Grooved . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78 - 80

Valves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81 – 94Valves Pictorial Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82Model B8101 Low Profile Butterfly Valves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83Model B302 Grooved End Butterfly Valves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84 - 87Model 308 Butterfly Valves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88 - 89Model BV835 Ball Valves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90 - 91Model 590 Grooved End Check Valves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92 - 93Model TD830 Triple Duty Valves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94

Circuit Balancing Valves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95 – 100Circuit Balancing Valves Pictorial Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96Circuit Balancing Valves Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97Model CB800 Circuit Balancing Valves, Grooved Ends . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98Model CB800 Circuit Balancing Valves, Threaded Ends . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98Model CB800 Circuit Balancing Valves, Flanged Ends, ANSI Class 125# . . . . . . . . . . . . . . . . . . . . . . 99Model CB800 Circuit Balancing Valves, Flanged Ends, PN16/PN10 . . . . . . . . . . . . . . . . . . . . . . . . . . 99Model CB800 Circuit Balancing Valves, MC2 Measuring Computer . . . . . . . . . . . . . . . . . . . . . . . . . 100Model CB800 Circuit Balancing Valves, Insulation Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100

Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101 – 108Accessories Pictorial Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102Figure S853 “Y” Strainers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103Figure S810 Suction Diffusers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104 - 105Figure S855 Tee Strainers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106Figure 7550 Expansion Joint . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107

Stainless Steel Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109 – 120Stainless Steel Systems Pictorial Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110Stainless Steel Couplings Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111Stainless Steel Fittings Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111Figure 472 Stainless Steel Rigid Couplings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112Figure 770 High Pressure Rigid Couplings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113Figure 405 Stainless Steel Flexible Couplings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114Figure 410 90° Stainless Steel Elbows . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115Figure 401 45° Stainless Steel Elbows . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115Figure 419 Tees. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116Figure 460 End Caps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116Figure 421 Reducing Tees . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 117Figure 450 Concentric Reducers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 118Figure 451 Eccentric Reducers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 119Figure 441 Flange Adapters (ANSI Class 150#) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120

Plain End Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121 – 132Plain End Systems Pictorial Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 122Plain End Couplings Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123Plain End Fittings Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123Figure 909 Plain End Couplings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 124Figure 910 90° Plain End Elbows . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125Figure 901 45° Plain End Elbows . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125Figure 910LR 90° Plain End Long Radius Elbows . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 126Figure 901LR 45° Plain End Long Radius Elbows . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 126Figure 919 Plain End Tees . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127Figure 921 Plain End Reducing Tees . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127Figure 927 Plain End Crosses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 128Figure 960 Plain End Caps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 128

4 www.grinnell.com

TABLE OF CONTENTSGe

nera

l Dat

a Figure 924 Plain End True Wyes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 129Figure 914 Plain End Laterals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 129Figure 999 Plain End Swaged Nipples . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 130Figures 991, 992, 993 Plain End Adapter Nipples . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 131Figure 941 Plain End Flange Adapters (ANSI Class 150#) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 132Figure 942 Plain End Flange Adapters (ANSI Class 300#) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 132

HDPE Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 133 – 138HDPE Systems Pictorial Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 134HDPE Systems Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 134Figure 9094 Flange Couplings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 135Figure 9095 HDPE Couplings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 136Figure 9097 HDPE Transition Couplings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 137

Gaskets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 139 – 146GRINNELL Gasket Types . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 140Gasket Styles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 141GRINNELL Gasket Grade & Recommendations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 142Gasket Air, Water & Chemical Recommendations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 143 - 145GRINNELL Gasket Lubricants . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 146

Preparation Equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 147 – 154Preparation Equipment Pictorial Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 148Roll Groove Standard Specification for Steel & Other IPS Pipe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 149Cut Groove Standard Specification for Steel & Other IPS Pipe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150Automated Roll Groovers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 151Portable Cut Groovers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 151Grooving Equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 151Portable Roll Groovers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 152Field Portable Roll Groovers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 152Pipe Support Stands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 153Hole Cutting Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 153Pipe Tape . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 153

Pressure & Design Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 155 – 166Grooved Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 156Thermal Movement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 157 - 158Misalignment & Deflection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 159Pipe Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 160Flexible Joints . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 160Rigid Joints . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 160Pipe Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 161 - 162Vertical Piping . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 163Global Pipe Size Designations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 164Metric/Imperial Conversion Chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 165Flange Washer Adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 165Flange Drilling Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166

GRINNELL Mechanical Services . . . . . . . . . . . . . . . . . . . . . . . . . . . . 167 – 170

Indices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 171 – 179Figure Number Indices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 172Part Name Indices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 173Keyword Indices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 174 - 178

10 Year Limited Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 179

Contact Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 180

6 www.grinnell.com

GENERAL DATAGe

nera

l Dat

a

The products and specifications published herein are for general evaluation and reference purposes only and are subject to change by Tyco Fire Protection Products without notice. For the most up-to-date information, visit www .grinnell .com. The information provided in this catalog should not be relied on as a substitute for professional advice concerning specific applications. ALTHOUGH TYCO FIRE PROTECTION PRODUCTS ENDEAVORS TO ENSURE ACCURACY, ALL INFORMATION HEREIN IS PROVIDED ON AN “AS IS” BASIS, WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED. Without limiting the foregoing, Tyco Fire Protection Products does not warrant the accuracy, adequacy, or completeness of any such information. All users of the information provided herein assume the risk of use or reliance on such information and Tyco Fire Protection Products shall not be liable for any damages for such use including, but not limited to, indirect, special, incidental, or consequential damages.

GRINNELLMECHANICAL PRoDuCTS GRINNELL Mechanical Products, a premium brand of Tyco International, represents a complete suite of mechanical building construction solutions for commercial, industrial, institutional, mining, and governmental applications. Available products offer contractors, engineers, and distributors faster, more cost-effective tools for joining pipe over traditional welding methods. These products include Grooved Couplings and Fittings, Butterfly Valves, High-Pressure Ball Valves, Strainers, Circuit Balancing Valves, HDPE Systems, Stainless Steel Systems, and comprehensive, competitively priced engineering and planning support services. In addition to delivering innovative Grooved Piping Solutions, GRINNELL Products are backed by an industry-leading, 10-year Limited Warranty.

Regional Headquarters

Corporate Headquarters

Research and Development

APAC Sales and Distribution Centers

MAKING CONNECTIONS…Global Headquarters Lansdale, Pennsylvania, USA

Research and Development Cranston, Rhode Island, USA

Asia-Pacific Sales and Distribution Centers Hong Kong Mumbai, India Beijing, China Chengdu, China Guangzhou, China Mount Waverley, Victoria, Australia

REGIoNAL HEADquARTERS

North AsiaShanghai, China

South AsiaSingapore

Australia Sunshine, Victoria

Europe and the Middle East Enschede, The Netherlands

South America, Central America, and CaribbeanPompano, Florida, USA

7

GENERAL DATA


Gene

ral D

ata

BUILDING SOLUTIONS

42 Stocking Warehouses 25 Manufacturing Locations

Presence in 185 Countries and 48 Languages

4200 Employees in 34 Countries

8 www.grinnell.com

GENERAL DATAGe

nera

l Dat

a

Reduced Installation Time and Cost Methods such as welding and soldering are

labor intensive and can be very expensive in high-cost regions. Pipe grooving reduces installation cost by up to

30%, allowing contractors to slash labor costs and remain within budget.

Flexible Retrofits and Repairs When an owner cannot afford to shut down a facility for

important retrofits, GRINNELL Mechanical Products solves the problem. GRINNELL Couplings and Fittings allow an

installer to fabricate on-site and around complex problems and obstacles. Fire permits are not required and building residents do not have to evacuate due to welding fumes.

Pipe Expansion Support GRINNELL Flexible Couplings absorb linear movements

of pipe work due to temperature changes, eliminating or minimizing the use of expansion joints. GRINNELL

Mechanical Services offers customers assistance with designing flexible couplings into

thermal expansion projects.

Compatibility With Hazardous Environments

Grooved Pipe does not require welding, threading, or cutting, eliminating cutting oils, fumes, and flames. It is the ideal method for joining pipe in enclosed,

flammable, or hazardous sites like tunnels and mines. And it doesn't require burn or hot-works permits.

Connection Consistency When construction calls for tough piping applications,

GRINNELL Grooved Products maintain high pressures at each connection without sacrificing quality and reliability.

GRINNELL Grooved Systems allow for quick assembly that is simple and consistent from one worker to the next.

Projects are completed on time, and crews can readily move on to their next installations.

No Special Tools Grooved Products are assembled onto a standard groove. No special tools or additional training to complete the job

are required.

Why Grooved?

9

GENERAL DATA


Gene

ral D

ata

The Best Warranty in the Industry GRINNELL Products are backed by a 10-year limited warranty. Our customers are proud to work with products manufactured by a market leader with an established brand name and a consistent history.

GRINNELL Mechanical Services Our Services Group works seamlessly with engineers and contractors to create the most cost-effective and time-efficient piping solutions from design...to build. Our experts specializes in CAD blocks, cost comparisons, thermal movement analysis, and BIM.

Green Solutions All GRINNELL Mechanical Products cast in our Anniston, Alabama Plant are manufactured with 90% recycled metal that would otherwise contribute to our nation’s solid waste stream. All waste paper, used cardboard, scrap wood, and EPDM waste from our plants is recycled.

Industry Pioneer GRINNELL Mechanical Products has been in the pipe-joining business for over 160 years. We have strategic stocking locations throughout the world to serve our customers. We have the best channel partners who are focused, as we are, on innovation and growth.

Great Service At GRINNELL Mechanical Services, the customer always comes first. We pride ourselves on providing knowledgeable sales support, timely technical service, and quality customer care to all global customers.

Global Presence You can find our products in buildings and installations all over the world. We provide global solutions that flexibly address the challenges our customers face, including design in one country for construction in another.

Why GRINNELL?

10 www.grinnell.com

GENERAL DATAGe

nera

l Dat

a

NoISE AND VIBRATIoN The resiliency of GRINNELL Grooved Couplings and versatility of various available gaskets provide excellent noise and vibration dampening. The engineered design of these couplings provides for pipe end gapping that helps to dissipate, isolate, and minimize noise and vibration transmission throughout the piping system.

DEPENDABILITY The coupling housings are designed to engage into the grooves and provide a secure joint. The pipe ends are sealed by a pressure responsive gasket which is encapsulated by the ductile iron housing.

MISALIGNMENT GRINNELL flexible couplings will accommodate misalignments. The maximum deflection information per coupling can be found in this catalogue.

SuPERIoR quALITY GRINNELL Piping Products are manufactured according to the ISO 9001:2000 Quality Assurance standard.

LoNGEVITY AND PERFoRMANCE GRINNELL Piping Products are designed to last the lifetime of the pipeline and have been tested and approved by prominent approval agencies. Rolled grooving does not remove any metal from the pipe. Therefore, pipe integrity is fully maintained when grooved systems are used to join pipe.

CLEAN Unlike with welding, GRINNELL Piping Products do not lead to hazardous fumes or to the possible introduction of foreign materials in the pipeline.

Product Features and Benefits

11

GENERAL DATA


Gene

ral D

ataAgency Listings and Approvals

COAST GuARDApproved each vessel individually

CORpS OF ENGiNEERS (COE)GEGS 15000

FEDERAL AviATiON ADmiNiSTRATiON (FAA)HVAC, Plumbing and Fire Protection

FEDERAL HOuSiNG ADmiNiSTRATiON (FHA)

Government AgenciesGENERAL SERviCES ADmiNiSTRATiON (GSA)15000 Series

miLiTARy SpECiFiCATiONS (miL)• MIL-P – 10388 Fittings• MIL-C – 10387 Couplings• MIL-P – 11087A (CE) Steel Pipe• Grooved MIL-I – 45208

Inspection Procedure

NATiONAL AERONAuTiCS AND SpACE ADmiNiSTRATiON (NASA)

NAvAL FACiLiTiES ENGiNEERiNG COmmAND (NAvFAC) NFGS 15000 Series

NATiONAL iNSTiTuTE OF HEALTH (NiH)Department of Health – 5000 Series

vETERANS AFFAiRS (vA)15000 Series

General Code Groups, Associations, Laboratories & Approval Bodies

ACTivFiREActive Fire Protection Product Certification

AmERiCAN BuREAu OF SHippiNG (ABS)

AmERiCAN NATiONAL STANDARDS iNSTiTuTE/AmERiCAN WATER WORkS ASSOCiATiON (ANSi/AWWA)

AmERiCAN pETROLEum iNSTiTuTE (Api)API Std. 5L, Sect. 7.5

AmERiCAN SOCiETy OF HEATiNG, REFRiGERATiON AND AiR CONDiTiONiNG ENGiNEERS (ASHRAE)

AmERiCAN SOCiETy OF mECHANiCAL ENGiNEERS (ASmE)• Power Piping, B-31.1• Chemical Plant and Petroleum

Refinery Piping, B-31.3• Refrigeration Piping, B-31.5• Building Services Piping, B31.9• Elevator, Escalator, A17.1

BuiLDiNG OFFiCiALS AND CODE ADmiNiSTRATORS (BOCA)

BuREAu vERiTAS (Bv)

CNBOpCentrum Naukowo-Badawcze Ochrony Przeciwpozarowe

CRNCanadian Registration Number

DNvDet Norske Veritas

DvGWDeutscher Verein des Gas-und Wasserfaches e.V.

FACTORy muTuAL ENGiNEERiNG CORp. (Fm)Approved for Fire Protection Services

iCC-ESInternational Association of Plumbing and Mechanical Officials (IAPMO)

ipCAssociation Connecting Electronics Industries

LLOyD’SLloyd’s Register of Shipping

LOSS pREvENTiON CERTiFiCATiON BOARD (LpCB)Approved for Fire Protection Services

mATERiAL EquipmENT AND ACCEpTANCE (mEA)

NATiONAL FiRE pROTECTiON ASSOCiATiON (NFpA)

NATiONAL SANiTATiON FOuNDATiON (NSF)The Public Health and Safety Company

RiNARegistro Italiano Navale

SOuTHERN BuiLDiNG CODE CONGRESS iNTERNATiONAL (SBCCi)Standard Plumbing

uNDERWRiTERS LABORATORiES, iNC. (uL)Listed for Fire Protection Services

uNDERWRiTERS LABORATORiES OF CANADA (uLC)Listed for Fire Protection Services

uNiFORm pLumBiNG CODE (upC)

vERBAND DER SACHvERSiCHERE E.v. (vDS)Approved for Fire Protective Service

WATERmARkPending Approved for Potable Water Service (AU)

WRASWater Regulations Advisory Scheme (UK)

WSDPending Approved for Potable Water Service (HK)

Our products bear the seal of approval from the following agencies, associations and laboratories.

12 www.grinnell.com

GENERAL DATAGe

nera

l Dat

a Product Design and Testing

Pre-Manufactured/Product DesignAll GRINNELL Products are designed and tested at our state-of-the-art Research and Development Technology Center in Cranston, Rhode Island, USA.

CastingGRINNELL castings poured at our foundry are made of ductile iron ASTM A536m, Grade 65-45-12. A rigorous quality control program monitors all steps of the manufacturing process. Samples are continuously tested chemically and physically to ensure all products meet our high material specifications.

Rubber InjectionWe manufacture our gaskets using rubber injection presses and tooling to mold different types of rubber compounds specifically designed for the many applications required by our customers. Physical tests are performed on finished gasket samples to verify compliance with specifications including ASTM D 2000.

Paint ProcessUsing a computer controlled process, each product is spray-washed, dried, pre-heated, dipped, and fully cured prior to assembly or packaging. All integral parts are inspected to maintain consistent paint coverage and surface condition.

ToolingUsing product designs from our Research and Development Department, our pattern center and contracted pattern makers design and build patterns and molds that produce products to the highest tolerances. Tooling is continually inspected by our in-house certified specialists to ensure finished products meet our specifications and requirements of approving agencies.

Foundry and Assembly

13

GENERAL DATA


Gene

ral D

ataISo 9001:2000 Certified

© BRE Global Ltd, 2009

Certificate of Quality SystemRegistration

TYCO FLOW CONTROL (M) SDN. BHD.(TYCO FIRE SUPPRESSION & BUILDING PRODUCTS, MALAYSIA)

Lot 886, C1 & C2, Jalan Subang 9, Taman Perindustrian Subang,47500 Subang, Selangor, Malaysia

has complied with the requirements of the following:

ISO 9001:2008

and is authorised to use the LPCB mark on stationeryand publications related to the following products

and/or services

Assembly of couplings and marketing of couplings and fittings.

T A Hunter

for and on behalf of LPCB

Certificate No: 673

Issue Number: 03

Date of Issue: 03 December 2010

Date of Expiry: 02 December 2013

LPCB is part of BRE Global Limited, Watford, WD25 9XX T: +44 (0)1923 664100 F: +44 (0)1923 664910 W: www.redbooklive.com

This certificate remains the property of BRE Global Ltd and is issued subject to terms and conditions. It is maintained and held in forcethrough at least annual review and verification. To check the validity of this certificate, please visit www.redbooklive.com or contact us.

14 www.grinnell.com

GENERAL DATAGe

nera

l Dat

a GRINNELL Websitewww .grinnell .com

Literature Tab The Literature tab showcases all

marketing materials for viewing, downloading, or saving to your preferred location. Marketing literature includes catalogs, brochures, installation manuals, flyers, and price books.

Tech Data The Tech Data tab provides direct

access to technical information on all our products. It also provides access to online registration for automatic e-mail updates.

Resources Tab Useful for everyday operations, the

Resources tab includes a conversion calculator to convert many units of measurement and a Product Cross Reference tool to search for GRINNELL product equivalents.

My Submittals Tab This tool, useful in bidding, allows you

to sign-up for a GRINNELL account. You can then create, save, print, and manage project submittals. Your account information is available 24/7 through the Website.

To learn more about GRINNELL Mechanical Products, visit www.grinnell.com. Our Website provides a wide variety of tools and information at your fingertips.

Browse Features on our grinnell .com Website

GRINNELL Homepage

Products Tab The Products tab organizes all

product information such as pricing, technical data, 3D CAD drawings, and part summary sheets. All product information is available for printing and saving to your preferred location. Searching for any product by name or figure number and downloading custom submittal sheets are also available through this tab.

Groo

veD

Coup

linGs

GROOvED COupLiNGS

16 www.grinnell.com

GRINNELL Couplings are designed for grooved end pipe and are available in nominal sizes of 25mm (1") to 600mm (24") including BS, ISO, and JIS outside diameters.

The GRINNELL Coupling Design provides economical advantages when compared to welded or flanged systems. GRINNELL Couplings provide a universal means for the connection of pipe, fittings, and pipe system components.

GRINNELL Couplings and Gaskets permit a wide selection of combinations for specific applications.

Field modifications are easily accommodated with GRINNELL mechanical products as the couplings can be easily rotated, eliminated and/or added to facilitate necessary modifications.

Figure 772Rigid CouplingsPages – 18 - 19

Figure 707Heavy Duty Flexible Couplings

Pages – 20 - 21

Figure 705Flexible Couplings

Page – 22

Figure 770High Pressure Rigid Couplings

Page – 23

Figure 716Flexible Reducing Couplings

Page – 24

Figure 780Grooved Snap Couplings

Page – 25

Figure 702Mechanical Outlet Couplings

Pages – 26 - 27

Figure 71Flange AdaptersPages – 28 - 29

Grooved Couplings Pictorial Table of Contents

Groo

veD

Coup

linGs

GROOvED COupLiNGS

17 Refer to back cover for country-specific customer care numbers.

Rigid ConnectionThe Figure 772 Coupling has a patented design that grips the full 360° circumference of the pipe grooves. This design provides a more rigid and stronger connection through a range of pipe tolerances. The coupling design eliminates distortion of the gasket as the housing sections come together.

Trouble-Free DesignThe patented universal tongue-and-groove design of the coupling housings assures trouble-free installation by avoiding the misalignment of the housings that could lead to a joint failure.

quick InstallationGRINNELL Figures 772 and 705 Couplings, in sizes up to 200mm (8"), feature a clamshell design that allows for an easy one-bolt installation, thus saving time during field installations.

Full contact between Figure 772 Coupling key and groove diameter

Ductile Iron Housing Specifications• ASTM A 536 – Standard specification for ductile iron

castings, Grade 65-45-12

• Tensile strength, minimum 448,159 kPa (65,000 psi)

• Yield strength, minimum 310,264 kPa (45,000psi)

• Elongation in 50mm (2"), minimum 12%

• ASTM A 153 – Standard specification for hot-dip galvanising

Bolt/Nut Specifications• Carbon steel oval neck bolts and nuts are heat-treated

and conform to the physical properties of ASTM A 183 with a minimum tensile strength of 758,422 kPa (110,000 psi). Bolts and nuts are zinc electroplated to ASTM B 633.

• Gold colour coded metric bolts conforming to the physical properties of ASTM F 568M are available upon request. Contact GRINNELL Mechanical Products.

• Stainless Steel nuts and bolts are UL Listed and comply with UL requirements. Bolts conform to ASTM A 193M, Class 2, Austenitic Stainless Steel. Nuts conform to ASTM A 194 Type 316, Grade 8M.

Coatings• Orange – Non-lead paint (standard)

• Hot-Dipped, Zinc Galvanised (Optional)

Gasket Specifications• Grade “E” EPDM gaskets have a green colour

code identification and conform to ASTM D 2000 for service temperatures from -34°C to 110°C ( -30°F to 230°F). They are recommended for hot water not to exceed 110°C (230°F), plus a variety of dilute acids, oil free air, and many chemical services. They are not recommended for petroleum services. For low temperature and vacuum systems, a Tri-Seal Grade “E” EPDM gasket with a rigid coupling is recommended.

• Grade “T” Nitrile gaskets have an orange colour code identification and conform to ASTM D 2000 for service temperatures from -29°C to 82°C ( -20°F to 180°F). They are recommended for petroleum products, vegetable oils, mineral oils, and air with oil vapours.

• Grade “L” Silicone gaskets are red and conform to ASTM D 2000 for service temperatures from -34°C to 177°C ( -30°F to 350°F). They are recommended for air without hydrocarbons, or dry heat.

• Grade “o” Fluoroelastomer gaskets have a blue colour code and conform to ASTM D 2000 for service temperatures from -7°C to 149°C (+20°F to 300°F). They are recommended for oxidising acids, petroleum products, hydraulic fluids, lubricants, and halogenated hyrdrocarbons.

• Grade “EN” NSF 61 approved gaskets have a copper colour code and are for potable water systems up to 82°C (180°F). They are not recommended for petroleum service.

MATERIAL SPECIFICATIoNS

Additional Features:

• Two-piece, tongue-and-groove design allows for fast and easy installation

• Standard industry groove does not require special tools

• Backed by the industry’s best 10-Year Limited Warranty

Groo

veD

Coup

linGs

GROOvED COupLiNGS

18 www.grinnell.com

Figure 772 Rigid Couplings(Page 1 of 2)

Tech Data Sheet: G140 The GRINNELL Figure 772 Rigid Coupling provides a rigid joint by firmly gripping along the circumference of the pipe grooves. This coupling offers a dependable method of joining pipe and is an economical alternative to welding, threading, or using flanges. The Figure 772 Rigid Coupling is UL Listed for grounding and bonding, and is suitable for bonding systems with a maximum service entrance capacity of 200 amps.Sizes 32mm – 200mm (11⁄4" – 8") feature a clamshell design that makes installation easier and faster.

Pipe Size Max.†Pressures

kPapsi

Max.†End Load

kNLbs.

Max.*‡ End Gap mm

Inches

Dimensions - mm Inches Coupling Bolts Approx.Weight

kgLbs.

Nominal mm

Inches

O.D.mm

Inches A B C Qty.

Sizemm

Inches

32 42.4 5171 7.22 1.5 69.9 111.3 46.02

M10 x 57 0.91-1⁄4 1.660 750 1,623.2 0.06 2.75 4.38 1.81 3⁄8 x 2-1⁄4 2.0

40 48.3 5171 9.46 2.0 76.2 117.3 46.02

M10 x 57 1.01-1⁄2 1.900 750 2,126.5 0.08 3.00 4.62 1.81 3⁄8 x 2-1⁄4 2.2

50 60.3 5171 14.78 3.3 86.6 130.0 47.82

M12 x 89 1.02 2.375 750 3,322.6 0.13 3.41 5.12 1.88 1⁄2 x 3 2.3

65 73.0 5171 21.66 3.3 99.3 143.0 47.82

M12 x 89 1.12-1⁄2 2.875 750 4,868.9 0.13 3.91 5.63 1.88 1⁄2 x 3 2.5

65 76.1 5171 23.58 3.3 106.4 145.3 50.82

M12 x 89 1.5– 3.000 750 5,301.4 0.13 4.19 5.72 2.00 - 3.4

80 88.9 5171 32.10 3.3 117.6 158.8 47.82

M12 x 89 1.43 3.500 750 7,215.8 0.13 4.63 6.25 1.88 1⁄2 x 3 3.0

100 114.3 5171 53.06 4.8 147.6 190.5 50.02

M12 x 89 1.94 4.500 750 11,928.2 0.19 5.81 7.50 1.97 1⁄2 x 3 4.2

125 139.7 5171 79.26 4.8 178.3 246.9 52.32

M16 x 83 3.4– 5.500 750 17,818.7 0.19 7.02 9.72 2.06 - 7.5

125 141.3 5171 81.09 4.8 180.1 246.6 51.82

M16 x 83 3.45 5.563 750 18,229.3 0.19 7.09 9.71 2.04 5⁄8 x 3-1⁄4 7.5

150 165.1 4826 103.18 4.8 205.5 267.5 54.12

M16 x 83 3.4– 6.500 700 23,228.2 0.19 8.09 10.53 2.13 - 7.6

150 168.3 4826 107.34 4.8 205.5 267.5 54.12

M16 x 83 3.46 6.625 700 24,130.1 0.19 8.09 10.53 2.13 5⁄8 x 3-1⁄4 7.6

200 ◗ 219.1 4137 155.94 4.8 268.2 344.4 66.52

M20 x 121 7.78 8.625 600 35,055.8 0.19 10.56 13.56 2.62 3⁄4 x 4-3⁄4 16.9

A

CB

A

B CB

A

C

32mm - 350mm (11⁄4" - 14") 400mm - 450mm (16" - 18") 500mm - 600mm (20" - 24")

For additional listings or approvals, see page 11 or

visit our website at www.grinnell.com

Listed for grounding and bonding, and is suitable for bonding systems with a maximum service entrance capacity of 200 amps.Sizes 32mm – 200mm design that makes installation easier and faster.

Groo

veD

Coup

linGs

GROOvED COupLiNGS



kPapsi

Max.†End Load

kNLbs.

Max.*‡ End Gap mm

Inches


kgLbs.

Nominal mm

Inches

O.D.mm

Inches A B C Qty.

Sizemm

Inches

250 ◗ 273.0 3447 201.87 3.3 326.1 416.8 66.52

M24 x 165 11.710 10.750 500 45,381.3 0.13 12.84 16.41 2.62 1 x 6-1⁄2 25.9

300 ◗ 323.9 2758 227.17 3.3 391.4 478.5 66.52

M24 x 165 16.012 12.750 400 51,070.5 0.13 15.41 18.84 2.62 1 x 6-1⁄2 35.4

350 355.6 2068 205.43 3.3 423.7 517.6 74.42

20.414 14.000 300 46,181.4 0.13 16.68 20.38 2.93 1 x 5-1⁄2• 45.0

400 406.4 2068 268.31 3.3 469.9 575.1 74.43

27.516 16.000 300 60,318.6 0.13 18.50 22.64 2.93 1 x 5-1⁄2• 60.6

450 457.2 2068 339.58 6.4 541.3 638.0 77.73

35.818 18.000 300 76,340.7 0.25 21.31 25.12 3.06 1 x 5-1⁄2• 79.0

500 508.0 2068 419.23 6.4 596.9 708.2 77.74

44.020 20.000 300 94,247.8 0.25 23.50 27.88 3.06 1-1⁄8 x 5-3⁄4• 97.0

600 609.6 1724 503.08 6.4 701.8 812.8 81.04

54.424 24.000 250 113,097.3 0.25 27.63 32.00 3.19 1-1⁄8 x 5-3⁄4• 120.0

* Maximumavailablegapbetweenpipeends.Minimumgap=0.† Maximumpressureandendloadaretotalfromallloadsbasedonstandardweightsteelpipe.Pressureratingsandendloadsmaydifferfor

otherpipematerialsand/orwallthicknesses.ContactGRINNELLMechanicalProductsfordetails.‡ Maxendgapisforcutgroovedstandardweightpipe.Valuesforrollgroovedpipewillbehalfthatofcutgrooved.• OnlyavailableinANSIboltsizes.◗ SizesareavailabletoJISstandards.ContactGRINNELLMechanicalProductsfordetails.Forinformationonlargersizes,Chinesesizesorotheralternativesizes,contactGRINNELLMechanicalProducts.Seepage17forgeneralnotes,andseepages140-146forgasketinformation.

Figure 772 Rigid Couplings(Page 2 of 2)

Tech Data Sheet: G140

A

CB

A

B CB

A

C

32mm - 350mm (11⁄4" - 14") 400mm - 450mm (16" - 18") 500mm - 600mm (20" - 24")

Groo

veD

Coup

linGs

GROOvED COupLiNGS

20 www.grinnell.com

Figure 707 Heavy Duty Flexible Couplings(Page 1 of 2)

Tech Data Sheet: G130The GRINNELL Figure 707 Heavy Duty Flexible Coupling allows for angular and linear deflection, thermal expansion and contraction, and misalignments of the pipe. Flexible couplings can act as an “expansion joint”, allowing linear and angular movement of the pipes when properly installed. This coupling is capable of pressures up to 6,895 kPa (1,000 psi), depending on pipe size and wall thickness. Suitable for use in a variety of applications, the Figure 707 Coupling provides a dependable method of joining pipe.


kPapsi

Max.†End Load

kNLbs.

Max.*‡ End Gap

mmInches

Deflection ‡ Dimensions - mm Inches Coupling Bolts Approx.Weight

kgLbs.

Nominal mm

Inches

O.D.mm

Inches

DegreesPer

Coupling

mm/mInches/Ft

A B C Qty.Sizemm

Inches

25 33.7 6995 6.10 3.35° 26'

98.4 60.5 101.6 46.02

M12 x 89 0.91 1.315 1000 1,360.0 0.13 1.14 2.38 4.00 1.81 1⁄2 x 3 2.0

32 42.4 6995 9.63 3.34° 19'

75.0 70.0 111.0 46.02

M12 x 89 1.01-1⁄4 1.660 1000 2,164.9 0.13 0.90 2.76 4.37 1.81 1⁄2 x 3 2.2

40 48.3 6995 12.61 3.33° 46'

65.8 75.4 117.6 46.02

M12 x 89 1.11-1⁄2 1.900 1000 2,835.3 0.13 0.79 2.97 4.63 1.81 1⁄2 x 3 2.5

50 60.3 6995 19.71 3.33° 1'

52.5 89.9 133.4 47.82

M12 x 89 1.42 2.375 1000 4,430.1 0.13 0.63 3.54 5.25 1.88 1⁄2 x 3 3.0

65 73.0 6995 28.88 3.32° 29'

43.3 103.1 146.1 47.82

M12 x 89 1.62-1⁄2 2.875 1000 6,491.8 0.13 0.52 4.06 5.75 1.88 1⁄2 x 3 3.5

65 76.1 6995 31.44 3.32° 23'

41.7 106.4 146.1 47.82

M12 x 89 1.8– 3.000 1000 7,068.6 0.13 0.50 4.19 5.75 1.88 4.0

80 88.9 6995 42.80 3.32° 3'

35.8 119.1 162.1 47.82

M12 x 89 1.83 3.500 1000 9,621.1 0.13 0.43 4.69 6.38 1.88 1⁄2 x 3 4.0

100 114.3 6995 70.75 6.43° 11'

55.8 151.1 209.6 52.32

M16 x 83 3.24 4.500 1000 15,904.3 0.25 0.67 5.95 8.25 2.06 5⁄8 x 3-1⁄4 7.0

125 139.7 6995 105.6 6.42° 30'

43.6 178.3 254.0 51.82

M20 x 121 3.8– 5.500 1000 23,758.3 0.25 0.52 7.02 10.00 2.04 3⁄4 x 4-3⁄4 8.3

125 141.3 6995 108.12 6.42° 35'

45.1 179.8 254.0 52.32

M20 x 121 4.55 5.563 1000 24,305.7 0.25 0.54 7.08 10.00 2.06 3⁄4 x 4-3⁄4 10.0

150 165.1 6995 147.61 6.42° 12'

38.4 208.0 285.8 52.32

M20 x 121 5.4– 6.500 1000 33,183.1 0.25 0.46 8.19 11.25 2.06 12.0

150 168.3 6995 153.34 6.42° 10'

37.8 210.8 285.8 52.32

M20 x 121 5.06 6.625 1000 34,471.6 0.25 0.45 8.30 11.25 2.06 3⁄4 x 4-3⁄4 11.1

200 ◗ 219.1 5516 207.91 6.41° 40'

29.2 271.3 355.6 62.72

M22 x 165 9.7

8 8.625 800 46,741.0 0.25 0.35 10.68 14.00 2.47 7⁄8 x 6-1⁄2 21.4

C

A

B

CB

A

CB

A

25mm - 300mm (1" - 12") 350mm - 450mm (14" - 18") 500mm - 600mm (20" - 24")



Groo

veD

Coup

linGs

GROOvED COupLiNGS



kPapsi

Max.†End Load

kNLbs.

Max.*‡ End Gap

mmInches


kgLbs.

Nominal mm

Inches

O.D.mm

Inches

DegreesPer

Coupling

mm/mInches/Ft

A B C Qty.Sizemm

Inches

250 ◗ 273.0 5516 322.99 6.41° 20'

23.3 331.7 417.6 66.82

M24 x 165 13.2

10 10.750 800 72,610.1 0.25 0.28 13.06 16.44 2.63 1 x 6-1⁄2 29.0

300 ◗ 323.9 5516 454.35 6.41° 7'

19.5 390.9 478.5 66.82

M24 x165 16.8

12 12.750 800 102,141.0 0.25 0.23 15.39 18.84 2.63 1 x 6-1⁄2 37.0

350 355.6 2068 205.43 6.41° 2'

18.0 423.4 517.7 74.73

20.914 14.000 300 46,181.4 0.25 0.22 16.67 20.38 2.94 1 x 5-1⁄2• 46.0

400 406.4 2068 268.31 6.40° 54'

15.8 478.3 575.1 74.73

26.816 16.000 300 60,318.6 0.25 0.19 18.83 22.64 2.94 1 x 5-1⁄2• 59.0

450 457.2 2068 339.58 6.40° 48'

14.0 541.3 638.0 77.73

35.418 18.000 300 76,340.7 0.25 0.17 21.31 25.12 3.06 1 x 5-1⁄2• 78.0

500 508.0 2068 419.23 6.40° 43'

12.5 596.1 708.2 77.74

40.420 20.000 300 94,247.8 0.25 0.15 23.47 27.88 3.06 1-1⁄8 x 5-3⁄4• 89.0

600 609.6 1724 503.08 6.40° 36'

10.5 700.5 812.8 81.04

50.824 24.000 250 113,097.3 0.25 0.13 27.58 32.00 3.19 1-1⁄8 x 5-3⁄4• 112.0


otherpipematerialsand/orwallthicknesses.ContactGRINNELLMechanicalProductsfordetails.‡Maxendgapanddeflectionisforcutgroovedstandardweightpipe.Valuesforrollgroovedpipewillbehalfthatofcutgrooved.• OnlyavailableinANSIboltsizes.◗ SizesareavailabletoJISstandards.ContactGRINNELLMechanicalProductsfordetails.Forinformationonlargersizes,Chinesesizesorotheralternativesizes,contactGRINNELLMechanicalProducts.Seepage17forgeneralnotes,andseepages140-146forgasketinformation.

C

A

B

CB

A

CB

A

25mm - 300mm (1" - 12") 350mm - 450mm (14" - 18") 500mm - 600mm (20" - 24")

Figure 707 Heavy Duty Flexible Couplings(Page 2 of 2)


Groo

veD

Coup

linGs

GROOvED COupLiNGS

22 www.grinnell.com

The GRINNELL Figure 705 Flexible Coupling allows for angular and linear deflection, thermal expansion and contraction, and misalignments of pipe. It is capable of pressures up to 3,447 kPa (500 psi), depending on pipe size and wall thickness. Suitable for use in a variety of applications, the Figure 705 Coupling provides a dependable method of joining pipe.

Figure 705 Flexible Couplings in sizes 32mm – 150mm (1¼" – 6") feature a clamshell design that makes installation easier and faster.


kPapsi

Max.†End Load

kNLbs.

Max.*‡ End Gap

mmInches


kgLbs.

Nominal mm

Inches

O.D.mm

Inches

DegreesPer

Coupling

mm/mInches/Ft

A B C Qty.Sizemm

Inches

32 42.4 3447 4.81 3.34° 19'

75.0 65.0 106.4 46.02

M10 x 57 0.81-1⁄4 1.660 500 1,082.1 0.13 0.90 2.56 4.19 1.81 3⁄8 x 2-1⁄4 1.840 48.3 3447 6.30 3.3

3° 46'65.8 69.9 112.8 46.0

2M10 x 57 0.8

1-1⁄2 1.900 500 1,417.6 0.13 0.79 2.75 4.44 1.81 3⁄8 x 2-1⁄4 1.850 60.3 3447 9.85 3.3

3° 1'52.5 82.6 124.0 47.8

2M10 x 57 0.8

2 2.375 500 2,215.1 0.13 0.63 3.25 4.88 1.88 3⁄8 x 2-1⁄4 1.865 73.0 3447 14.43 3.3

2° 29'43.3 93.7 139.7 47.8

2M10 x 57 0.9

2-1⁄2 2.875 500 3,245.9 0.13 0.52 3.69 5.50 1.88 3⁄8 x 2-1⁄4 2.065 76.1 3447 15.72 3.3

2° 23'41.7 101.6 146.10 47.8

2M12 x 89 1.4

– 3.000 500 3,534.3 0.13 0.50 4.00 5.75 1.88 – 3.180 88.9 3447 21.39 3.3

2° 3'35.8 111.3 165.1 47.8

2M12 x 89 1.5

3 3.500 500 4,810.6 0.13 0.43 4.38 6.50 1.88 1⁄2 x 3 3.3100 114.3 3447 35.35 6.4

3° 11'55.6 144.5 196.9 52.3

2M12 x 89 1.8

4 4.500 500 7,952.2 0.25 0.67 5.69 7.75 2.06 1⁄2 x 3 4.0125 139.7 3103 47.56 6.4

2° 36'45.5 173.0 247.7 52.3

2M16 x 83 3.0

– 5.500 450 10,691.2 0.25 0.55 6.81 9.75 2.06 – 6.6125 141.3 3103 48.63 6.4

2° 35'45.0 174.8 247.7 52.3

2M16 x 83 3.0

5 5.563 450 10,937.6 0.25 0.54 6.88 9.75 2.06 5⁄8 x 3-1⁄4 6.6150 165.1 3103 66.36 6.4

2° 12'38.3 196.9 271.5 52.3

2M16 x 83 3.2

– 6.500 450 14,932.4 0.25 0.46 7.75 10.69 2.06 – 7.0150 168.3 3103 68.97 6.4

2° 10'37.8 201.7 271.5 52.3

2M16 x 83 3.2

6 6.625 450 15,512.2 0.25 0.45 7.94 10.69 2.06 5⁄8 x 3-1⁄4 7.0

200 ◗ 219.1 3103 116.89 6.41° 40'

29.2 258.8 344.4 63.52

M20 x 121 5.48 8.625 450 26,291.8 0.25 0.35 10.19 13.56 2.50 3⁄4 x 4-3⁄4 11.8

250 ◗ 273.0 2413 141.31 6.41° 20'

23.3 322.3 416.1 66.82

M24 x 165 12.210 10.750 350 31,766.9 0.25 0.28 12.69 16.38 2.63 1 x 6-1⁄2 26.8

300 ◗ 323.9 2413 198.78 6.41° 7'

19.5 379.5 479.6 66.82

M24 x 165 14.612 12.750 350 44,686.7 0.25 0.23 14.94 18.88 2.63 1 x 6-1⁄2 32.2


otherpipematerialsand/orwallthickness.ContactGRINNELLMechanicalProductsfordetails.‡Maxendgapanddeflectionisforcutgroovedstandardweightpipe.Valuesforrollgroovedpipewillbehalfthatofcutgrooved.◗ SizesareavailabletoJISstandards.ContactGRINNELLMechanicalProductsfordetails.Forinformationonlargersizes,Chinesesizesorotheralternativesizes,contactGRINNELLMechanicalProducts.Seepage17forgeneralnotes,andseepages140-146forgasketinformation.

B C

A



Figure 705 Flexible CouplingsTech Data Sheet: G110

Groo

veD

Coup

linGs

GROOvED COupLiNGS


Figure 770 High Pressure Rigid CouplingsTech Data Sheet: G138

The Figure 770 Rigid Coupling provides a rigid joint by firmly gripping along the circumference of the pipe grooves. This coupling offers a dependable method for joining pipe and is an economical alternative to welding, threading, or using flanges. It is capable of pressures up to 6,895 kPa (1000 psi) depending on pipe size and wall thickness.


kPapsi

Max.†End Load

kNLbs.

Max.*‡ End Gap

mmInches


kgLbs.

Nominal mm

Inches

O.D.mm

Inches A B C Qty.

Sizemm

Inches

50 60.3 6895 19.71 3.6 89.7 145.3 47.82

M16 x 70 1.52 2.375 1000 4,430.1 0.14 3.53 5.72 1.88 5⁄8 x 2-3⁄4 3.4

65 73.0 6895 28.88 3.6 103.1 152.4 47.82

M16 x 89 1.82-1⁄2 2.875 1000 6,491.8 0.14 4.06 6.00 1.88 5⁄8 x 3-1⁄2 4.0

80 88.9 6895 42.79 3.6 121.4 171.7 47.82

M16 x 89 2.43 3.500 1000 9,621.1 0.14 4.78 6.76 1.88 5⁄8 x 3-1⁄2 5.3

100 114.3 6895 70.74 6.4 152.7 215.9 53.32

M20 x 108 3.34 4.500 1000 15,904.3 0.25 6.01 8.50 2.10 3⁄4 x 4-1⁄4 7.3

150 168.3 6895 153.33 6.4 216.2 285.8 53.32

M22 x 140 6.86 6.625 1000 34,471.6 0.25 8.51 11.25 2.10 7⁄8 x 5-1⁄2 15.0

200 219.1 5516 207.90 6.4 277.6 349.3 66.02

M24 x 140 11.38 8.625 800 46,741.0 0.25 10.93 13.75 2.60 1 x 5-1⁄2 25.0

250 273.0 5516 322.97 6.4 341.9 406.4 66.02

M24 x165 15.410 10.750 800 72,610.1 0.25 13.46 16.00 2.60 1 x 6-1⁄2 34.0

300 323.9 5516 454.32 6.4 394.2 457.2 66.02

M24 x165 18.112 12.750 800 102,141.0 0.25 15.52 18.00 2.60 1 x 6-1⁄2 40.0


otherpipematerialsand/orwallthickness.ContactGRINNELLMechanicalProductsfordetails.‡ Maxendgapanddeflectionisforcutgroovedstandardweightpipe.Valuesforrollgroovedpipewillbehalfthatofcutgrooved.Forinformationonlargersizes,contactGRINNELLMechanicalProducts.Seepage17forgeneralnotes,andseepages140-146forgasketinformation.

C

A

B

Groo

veD

Coup

linGs

GROOvED COupLiNGS

24 www.grinnell.com

Figure 716 Flexible Reducing CouplingsTech Data Sheet: G120

The GRINNELL Figure 716 Flexible Reducing Coupling allows for a direct transition between two different pipe sizes and replaces two couplings and a reducing fitting. It is capable of pressures up to 3,447 kPa (500 psi) depending on pipe size and wall thickness. A flexible reducing coupling is not recommended for low-temperature applications.


kPapsi

Max.†End

LoadkN/Lbs.

Max.*‡ End Gap

mmInches

Deflection ‡Dimensions mm Inches

Coupling Bolts Approx.Weight

kgLbs.

Nominal mm

Inches

O.D.mm

Inches

DegreesPer

Coupling

mm/mInches/Ft

A B C Qty.Sizemm

Inches

50 x 40 60.3 x 48.3 3447 6.31 3.31° 53'

32.9 88.9 128.5 47.82

M10 x 57 1.32 x 1-1⁄2 2.375 x 1.900 500 1,417.6 0.13 0.39 3.50 5.06 1.88 3⁄8 x 2-1⁄4 2.865 x 50 73.0 x 60.3 3447 9.85 3.3

1° 33'27.1 101.6 139.7 47.8

2M120 x 57 1.5

2-1⁄2 x 2 2.875 x 2.375 500 2,215.1 0.13 0.32 4.00 5.50 1.88 3⁄8 x 2-1⁄4 3.365 x 50 76.1 x 60.3 3447 9.85 3.3

1° 34'27.3 106.4 149.4 47.8

2M12 x 89 1.5

– 3.000 x 2.375 500 2,215.1 0.13 0.33 4.19 5.88 1.88 3.380 x 50 88.9 x 60.3 3447 9.85 3.3

1° 17'22.4 119.1 165.1 47.8

2M12 x 89 2.0

3 x 2 3.500 x 2.375 500 2,215.1 0.13 0.27 4.69 6.50 1.88 1⁄2 x 3 4.380 x 65 88.9 x 73.0 3447 14.44 3.3

1° 17'22.4 119.1 165.1 47.8

2M12 x 89 1.8

3 x 2-1⁄2 3.500 x 2.875 500 3,245.9 0.13 0.27 4.69 6.50 1.88 1⁄2 x 3 3.980 x 65 88.9 x 76.1 3447 15.72 3.3

1° 17'22.4 119.1 165.1 47.8

2M12 x 89 1.9

– 3.500 x 3.000 500 3,534.3 0.13 0.27 4.69 6.50 1.88 4.2100 x 60 114.3 x 60.3 3447 9.85 4.8

2° 38'46.0 152.4 206.5 50.8

2M16 x 83 2.4

4 x 2 4.500 x 2.375 500 2,215.1 0.19 0.55 6.00 8.13 2.00 5⁄8 x 3-1⁄4 5.2100 x 65 114.3 x 73.0 3447 14.44 4.8

2° 38'46.0 152.4 206.5 50.8

2M16 x 83 3.0

4 x 2-1⁄2 4.500 x 2.875 500 3,245.9 0.19 0.55 6.00 8.13 2.00 5⁄8 x 3-1⁄4 6.7100 x 65 114.3 x 76.1 3447 15.72 4.8

2° 38'46.0 152.4 206.5 50.8

2M16 x 83 2.8

– 4.500 x 3.000 500 3,534.3 0.19 0.55 6.00 8.13 2.00 6.2100 x 80 114.3 x 88.9 3447 21.40 4.8

2° 38'46.0 152.4 206.5 50.8

2M16 x 83 2.8

4 x 3 4.500 x 3.500 500 4,810.6 0.19 0.55 6.00 8.13 2.00 5⁄8 x 3-1⁄4 6.2125 x 100 139.7 x 114.3 3447 35.37 6.4

2° 38'46.0 179.3 241.3 52.3

2M20 x 121 4.4

– 5.500 x 4.500 500 7,952.2 0.25 0.55 7.06 9.50 2.06 9.6125 x 100 141.3 x 114.3 3447 35.37 6.4

2° 5'36.4 181.1 242.8 52.3

2M20 x 121 4.4

5 x 4 5.563 x 4.500 500 7,952.2 0.25 0.44 7.13 9.56 2.06 3⁄4 x 4-3⁄4 9.6150 x 100 165.1 x 114.3 2758 28.30 6.4

1° 50'32.0 207.8 274.6 52.3

2M20 x 121 5.8

165mm x 4 6.500 x 4.500 400 6,361.7 0.25 0.38 8.18 10.81 2.06 12.8150 x 100 168.3 x 114.3 2758 28.30 6.4

1° 44'30.0 212.9 276.4 52.3

2M20 x 121 5.8

6 x 4 6.625 x 4.500 400 6,361.7 0.25 0.36 8.38 10.88 2.06 3⁄4 x 4-3⁄4 12.8150 x 125 168.3 x 141.3 2758 43.25 6.4

1° 44'30.0 212.9 276.4 52.3

2M20 x 121 6.3

6 x 5 6.625 x 5.563 400 9,722.3 0.25 0.36 8.38 10.88 2.06 3⁄4 x 4-3⁄4 13.8200 x 150 219.1 x 168.3 2758 61.33 6.4

1° 15'21.0 271.5 349.3 57.2

2M22 x 165 9.1

8 x 6 8.625 x 6.625 400 13,788.6 0.25 0.26 10.69 13.75 2.25 7⁄8 x 6-1⁄2 20.0

* Maximumavailablegapbetweenpipeends.Minimumgap=0.† Maximumpressureandendloadaretotalfromallloadsbasedonstandardweightsteelpipe.Pressureratingsandendloadsmaydifferon

otherpipematerialsand/orwallthickness.ContactGRINNELLMechanicalProductsfordetails.‡ Maxendgapanddeflectionisforcutgroovedstandardweightpipe.Valuesforrollgroovedpipewillbehalfthatofcutgrooved.Forinformationonlargersizes,contactGRINNELLMechanicalProducts.Seepage17forgeneralnotes,andseepages140-146forgasketinformation.

B

A

C For additional listings or approvals, see page 11 or


Groo

veD

Coup

linGs

GROOvED COupLiNGS


The GRINNELL Figure 780 Grooved Snap Coupling is designed for quickly connecting and disconnecting cut or rolled grooved piping systems. It utilises a hinged lever mechanism for quickly joining grooved piping segments securely without nuts and bolts. Coupling housing segments are locked in place using a split pin.

Pipe Size Max. † *WorkingPressure

kPapsi

Max. *End Load

kNLbs.

Max. End Gap mm

Inches

Dimensions - mm Inches Deflection Approx.Weight

kgLbs.

Nominal mm

Inches

O.D.mm

Inches A B C

DegreesPer

Coupling

mm/mInches/Ft

40 48.3 2068 3.8 1.6 75.0 118.0 47.03° 48'

66.4 1.01-1⁄2 1.900 300 851 0.06 2.95 4.65 1.85 0.80 2.2

50 60.3 2068 5.9 1.6 86.0 121.0 48.03° 31'

61.5 1.12 2.375 300 1,329 0.06 3.39 4.76 1.89 0.74 2.4

65 73.0 2068 8.7 1.6 92.0 150.0 48.02° 30'

43.7 1.42-1⁄2 2.875 300 1,947 0.06 3.62 5.91 1.89 0.52 3.1

65 76.1 2068 9.4 1.6 92.0 150.0 48.02° 24'

41.9 1.4- 3.000 300 2,121 0.06 3.62 5.91 1.89 0.50 3.1

80 88.9 2068 12.8 1.6 119.0 163.0 48.02° 24'

41.9 1.83 3.500 300 2,886 0.06 4.69 6.42 1.89 0.50 4.0

100 114.3 2068 21.2 3.2 165.0 205.0 52.03° 12'

55.9 2.74 4.500 300 4,771 0.13 6.50 8.07 2.05 0.67 5.9

125 139.7 2068 31.7 3.2 189.0 253.0 52.02° 37'

45.7 4.9- 5.500 300 7,127 0.13 7.44 9.96 2.05 0.55 10.8

125 141.3 2068 32.4 3.2 189.0 253.0 52.02° 36'

45.4 4.95 5.565 300 7,289 0.13 7.44 9.96 2.05 0.54 10.8

150 165.1 2068 44.3 3.2 213.0 278.0 52.02° 14'

39.0 5.8- 6.500 300 9,955 0.13 8.39 10.94 2.05 0.47 12.8

150 168.3 2068 46.0 3.2 216.0 281.0 52.02° 10'

37.8 5.86 6.625 300 10,341 0.13 8.50 11.06 2.05 0.45 12.8

200 219.1 2068 78.0 3.2 278.0 356.0 62.01° 40'

29.1 9.38 8.625 300 17,528 0.13 10.95 14.02 2.44 0.35 20.5

† Pressureratingslistedarecoldwaterpressureormaximumworkingpressurewithintheservicetemperaturerangeofthegasketusedinthecoupling.

* MaximumworkingpressuresandendloadslistedaretotalofinternalandexternalpressuresandloadsbasedonSchedule40steelpipegroovedinaccordancewithStandardCutGrooveorRollGrooveSpecifications.

Forinformationonlargersizes,contactGRINNELLMechanicalProducts.Seepage17forgeneralnotes,andseepages140-146forgasketinformation.

CB

A

Split Pin

Figure 780 Grooved Snap CouplingsTech Data Sheet: G145

Groo

veD

Coup

linGs

GROOvED COupLiNGS

26 www.grinnell.com

Figure 702 Mechanical outlet Couplings(Page 1 of 2)

Tech Data Sheet: G220The GRINNELL Figure 702 Mechanical Outlet Coupling has the combined features of a coupling and a reducing outlet, eliminating the need for a mechanical tee or other associated couplings. The coupling is available in grooved, male-threaded, or female-threaded outlets. This design makes installation faster, safer, and more cost effective on the job site.

Additional features:• Available in sizes 40mm - 150mm (1½" to 6")• Rated for pressures up to 3,447 kPa (500 psi)• Suitable for vacuum service up to 254mm HG (10" HG)

Figure702OutletCouplingwithFemaleNPTOutlet

Figure702OutletCouplingwithMaleNPTOutlet

Figure702OutletCouplingwithGroovedOutlet

Run Pipe Size Branch SizeEnd GapRange

mmInches

Max. Run End

LoadkN

Lbs.

Dimensionsmm Inches

Coupling Bolt Size Inches

Approx. Weight

kgLbs.

Nominal mm

Inches

O.D.mm

Inches

Female ◆Thread

mmInches

Male ◆Thread

mmInches

Grooved

A B C TNominal mm

Inches

O.D.mm

Inches

401-1⁄2

48.31.900

21.3 – – – 20-22

6.31418

– 114.3 70.0 52.0

3⁄8 x 2-1⁄8 •

1.21⁄2 – – – 0.81-0.88 – 4.50 2.75 2.06 2.6

26.7 – – – 20-22 – 114.3 70.0 52.0 1.23⁄4 – – – 0.81-0.88 – 4.50 2.75 2.06 2.6

33.7 – – – 20-22 – 114.3 70.0 49.0 1.31 – – – 0.81-0.88 – 4.50 2.75 1.94 2.9

502

60.32.375

21.3 – – – 20-22

9.92215

– 127.0 70.0 59.0

3⁄8 x 2-1⁄8 •

1.41⁄2 – – – 0.81-0.88 – 5.00 2.75 2.32 3.1

26.7 – – – 20-22 – 127.0 70.0 59.0 1.43⁄4 – – – 0.81-0.88 – 5.00 2.75 2.32 3.1

33.7 33.7 25 33.7 20-22 89.0 127.0 70.0 56.0 1.51 1 1 1.315 0.81-0.88 3.50 5.00 2.75 2.20 3.3

652-1⁄2

73.02.875

21.3 – – – 32-38

14.43246

– 161.0 83.0 56.0

1⁄2 x 2-3⁄8 •

2.21⁄2 – – – 1.25-1.50 – 6.33 3.25 2.20 4.8

26.7 – – – 32-38 – 161.0 83.0 65.0 2.13⁄4 – – – 1.25-1.50 – 6.33 3.25 2.56 4.6

33.7 – – – 32-38 – 161.0 83.0 62.0 4.41 – – – 1.25-1.50 – 6.33 3.25 2.44 2.2

– 42.4 32 42.4 32-38 94.0 161.0 83.0 – 2.3– 1-1⁄4 1-1⁄4 1.660 1.25-1.50 3.70 6.33 3.25 – 5.1

– 48.3 40 48.3 32-38 94.0 161.0 83.0 – 5.9– 1-1⁄2 1-1⁄2 1.900 1.25-1.50 3.70 6.33 3.25 – 2.4

CB

A

A

CBCB

T

Groo

veD

Coup

linGs

GROOvED COupLiNGS


Run Pipe Size Branch SizeEnd GapRange

mmInches

Max. Run End

LoadkN

Lbs.

Dimensionsmm Inches

Coupling Bolt Size Inches

Approx. Weight

kgLbs.

Nominal mm

Inches

O.D.mm

Inches

Female ◆Thread

mmInches

Male ◆Thread

mmInches

Grooved

A B C TNominal mm

Inches

O.D.mm

Inches

803

88.93.500

26.7 – – – 32-38

21.44811

– 175.0 83.0 72.0

1⁄2 x 3 •

2.73⁄4 – – – 1.25-1.50 – 6.87 3.25 2.83 5.9

33.7 33.4 25 33.7 32-38 102.0 175.0 83.0 70.0 2.81 1 1 1.315 1.25-1.50 4.00 6.87 3.25 2.75 6.2

– 48.3 40 48.3 32-38 102.0 175.0 83.0 – 2.9– 1-1⁄2 1-1⁄2 1.900 1.25-1.50 4.00 6.87 3.25 – 6.4

1004

114.34.500

26.7 – – – 41-46

35.47952

– 211.0 93.0 94.0

5⁄8 x 3-1⁄2 •

4.23⁄4 – – – 1.63-1.81 – 8.31 3.66 3.70 9.2

33.7 – – – 41-46 – 211.0 93.0 91.0 4.31 – – – 1.63-1.81 – 8.31 3.66 3.58 9.5

48.3 48.3 40 48.3 41-46 124.0 211.0 93.0 84.0 4.31-1⁄2 1-1⁄2 1-1⁄2 1.900 1.63-1.81 4.88 8.31 3.66 3.31 9.5

– 60.3 50 60.3 41-46 124.0 211.0 93.0 – 4.5– 2 2 2.375 1.63-1.81 4.88 8.31 3.66 – 9.9

1506

168.36.625

– – – – 41-46

76.717,235

– 276.0 94.0 –

5⁄8 x 3-1⁄2 •

6.0– – – – 1.63-1.81 – 10.86 3.70 – 13.2

33.7 – – – 41-46 – 276.0 94.0 121.0 6.01 – – – 1.63-1.81 – 10.86 3.70 4.76 13.2

48.3 48.3 40 48.3 41-46 154.0 276.0 94.0 121.0 6.21-1⁄2 1-1⁄2 1-1⁄2 1.900 1.63-1.81 6.06 10.86 3.70 4.76 13.6

– 60.3 50 60.3 41-46 154.0 276.0 94.0 – 6.5– 2 2 2.375 1.63-1.81 6.06 10.86 3.70 – 14.3

◆ ThreadsareNPT.SomesizeoutletsareavailablewithBSPthreads.ContactGRINNELLMechanicalproductsfordetails.• OnlyavailableinANSIboltsizes.Forinformationonlargersizes,contactGRINNELLMechanicalProducts.Seepage17forgeneralnotes,andseepages140-146forgasketinformation.

Figure702OutletCouplingwithFemaleNPTOutlet

Figure702OutletCouplingwithMaleNPTOutlet

Figure702OutletCouplingwithGroovedOutlet

CB

A

A

CBCB

T

Figure 702 Mechanical outlet Couplings(Page 2 of 2)


Groo

veD

Coup

linGs

GROOvED COupLiNGS

28 www.grinnell.com

Figure 71 Flange Adapters (ANSI Class 125/150)(Page 1 of 2)

Tech Data Sheet: G150The Figure 71 Flange Adapter is capable of pressures up to 2,068 kPa (300 psi) depending on pipe size and wall thickness. It provides a direct transition from flanged components to a grooved piping system. I.P.S. size flange bolt patterns conform to ANSI Class 125 and 150.

The gasket seal is designed with an optimal amount of rubber to provide a dependable seal and to avoid the gasket pocket from overfilling, which may cause assembly difficulties.

Pipe SizeMax †

PressurekPapsi

Max End Load †

NLbs.

Dimensions - mm InchesRecommended

Flange Mating Bolts ‡Approx.

Wt.kg

Lbs

Nominal mm

Inches

O.D.mm

Inches A B C *D *E F

Size Dia. x Lg

mm Inches

Qty.

BoltTorqueRange

NmLbs.-ft.

50 60.3 2068 5889 162.1 120.7 19.1 60.5 86.6 184.24

149-190 1.92 2.375 300 1,324 6.38 4.75 0.75 2.38 3.41 7.25 5⁄8 x 3 110-140 4.1

65 73.0 2068 8665 178.0 140.0 22.0 73.0 99.0 200.04

149-190 2.42-1⁄2 2.875 300 1,948 7.00 5.50 0.88 2.88 3.91 7.88 5⁄8 x 3 110-140 5.4

65 76.1 2068 9435 184.9 145.0 22.0 76.1 102.4 205.24

149-190 2.6– 3.000 300 2,121 7.28 5.71 0.88 3.00 4.03 8.08 5⁄8 x 3 110-140 5.8

80 88.9 2068 12,838 190.5 152.4 23.9 88.9 115.1 251.04

149-190 2.73 3.500 300 2,886 7.50 6.00 0.94 3.50 4.53 9.88 5⁄8 x 3 110-140 6.0

100 114.3 2068 21,222 228.6 190.5 23.9 114.3 140.5 251.58

149-190 3.74 4.500 300 4,771 9.00 7.50 0.94 4.50 5.53 9.90 5⁄8 x 3 110-140 8.1

125 139.7 2068 31,702 249.9 210.1 25.4 139.7 169.2 270.38

298-339 4.2– 5.500 300 7,127 9.84 8.27 1.00 5.50 6.66 10.64 3⁄4 x 3-1⁄2 220-250 9.2

125 141.3 2068 32,436 254.0 215.9 25.4 141.2 170.7 289.18

298-339 4.25 5.563 300 7,292 10.00 8.50 1.00 5.56 6.72 11.38 3⁄4 x 3-1⁄2 220-250 9.2

150 165.1 2068 44,282 285.0 240.6 25.4 165.1 194.6 307.38

298-339 5.0– 6.500 300 9,955 11.22 9.45 1.00 6.50 7.66 12.10 3⁄4 x 3-1⁄2 220-250 11.0

150 168.3 2068 45,999 279.4 241.3 25.4 168.1 197.6 301.88

298-339 4.86 6.625 300 10,341 11.00 9.50 1.00 6.62 7.78 11.88 3⁄4 x 3-1⁄2 220-250 10.5

200 219.1 2068 77,968 342.9 298.5 28.7 218.9 252.5 365.38

298-339 7.38 8.625 300 17,528 13.50 11.75 1.13 8.62 9.94 14.38 3⁄4 x 3-1⁄2 220-250 16.2

250 273.0 2068 121,121 406.4 362.0 30.2 273.1 312.7 428.812

434-542 9.410 10.750 300 27,229 16.00 14.25 1.19 10.75 12.31 16.88 7⁄8 x 4 320-400 20.7

300 323.9 2068 170,380 482.6 431.8 31.8 323.9 363.5 508.012

434-542 14.412 12.750 300 38,303 19.00 17.00 1.25 12.75 14.31 20.00 7⁄8 x 4 320-400 31.8

CA

F B E D

Sizes 50mm - 300mm (2" - 12")



Groo

veD

Coup

linGs

GROOvED COupLiNGS


Sizes 350mm - 600mm (14" - 24")

F

CA

E D

B

SegmentBolt

Pipe SizeMax †

PressurekPapsi

Max End Load †

NLbs.



Wt.kg

Lbs

Nominal mm

Inches

O.D.mm


Size Dia. x Lg

mm Inches

Qty.

BoltTorqueRange

NmLbs.-ft.

350 355.6 2068 205,423 533.4 476.5 36.5 355.6 381.8 609.612

488-705 21.2

14** 14.000 300 46,181 21.00 18.76 1.44 14.00 15.03 24.00 1 x 4-1⁄4 • 360-520 46.7

400 406.4 2068 268,294 596.9 540.0 38.10 406.4 431.7 673.116

488-705 26.8

16** 16.000 300 60,315 23.50 21.26 1.50 16.00 17.00 26.50 1 x 4-1⁄4 • 360-520 59.0

450 457.2 2068 340,089 635.0 578.1 41.3 457.2 482.8 736.616

610-982 28.3

18** 18.000 300 76,455 25.00 22.76 1.63 18.00 19.01 29.00 1-1⁄8 x 4-3⁄4 • 450-725 62.5

500 508.0 2068 419,223 698.5 635.0 44.5 508.0 534.2 800.120

610-982 33.2

20** 20.000 300 94,245 27.50 25.00 1.75 20.00 21.03 31.50 1-1⁄8 x 4-3⁄4 • 450-725 73.3

600 609.6 1724 603,713 812.8 749.3 49.0 609.6 636.3 914.420

841-1356 45.6

24** 24.000 250 135,720 32.00 29.50 1.93 24.00 25.05 36.00 1-1⁄4 x 5-1⁄2 • 620-1000 100.6

* DimensionsDandErepresentminimumandmaximumsealingsurfaces.**Forsegmentbolttorquerecommendations,refertoTableAbelow.• Metricsegmentboltareavailableuponrequest.† Maximumpressureandendloadaretotalfromallloadsbasedonstandardweightsteelpipe.Pressureratingsandendloadsmaydifferon

otherpipematerialsand/orwallthickness.ContactGRINNELLMechanicalProductsfordetails.‡ Matingboltsandnutsarenotsupplied.FlangematingboltsmustbeatleastSAEJ429,Grade5orstronger.Boltlengthsarestandard;

responsibilitylieswiththepurchasertoverifythecorrectlengthfortheintendedapplication.Forinformationonlargersizes,contactGRINNELLMechanicalProducts.Seepage17forgeneralnotes,andseepages140-146forgasketinformation.Seepage165forflangewasheradapterandpage166flangedrillingspecifications

tab

le a

s

eg

me

nt

bo

lt t

or

qu

e

Pipe Size Segment Bolts

Nominal mm

Inches

O.D.mm

Inches

Size - Dia. x Lgmm

Inches

Bolt Torque RangeNm

Lbs.-ft.

350 355.6

–5⁄8 x 4-3⁄4

149-190 100-130

14** 14.000

400 406.416** 16.000

450 457.2

–3⁄4 x 4-3⁄4

176-244130-180

18** 18.000

500 508.020** 20.000

600 609.624** 24.000

Figure 71 Flange Adapters (ANSI Class 125/150)(Page 2 of 2)


Groo

veD

Coup

linGs

GROOvED COupLiNGS

30 www.grinnell.com

Pipe Size

PN10/PN16

Max †End

LoadN

Lbs.



Wt.kg

Lbs

Nominal mm

Inches

O.D.mm


Size Dia. x Lg

mmInches

Qty.

BoltTorqueRange

Nm

50 60.3PN10 / PN16

5889 162.1 125.0 19.1 60.5 86.6 184.2 M16 x 764

149-190 1.82 2.375 1,324 6.38 4.92 0.75 2.38 3.41 7.25 110-140 4.0

65 73.0PN10 / PN16

8665 177.8 139.7 22.4 73.6 99.3 130.3 M16 x 764

149-190 2.42-1⁄2 2.875 1,948 7.00 5.50 0.88 2.88 3.91 5.13 110-140 5.4

65** 76.1PN10

8665 184.9 145.0 22.4 76.1 102.4 205.5 M16 x 764

149-190 2.6– 3.000 1,948 7.28 5.71 0.88 3.00 4.03 8.09 110-140 5.7

65** 76.1PN16

8665 184.9 144.8 22.4 76.1 102.4 205.2 M16 x 764

149-190 2.5– 3.000 1,948 7.28 5.70 0.88 3.00 4.03 8.08 110-140 5.6

80 88.9PN10

12,838 184.4 146.3 23.9 88.9 115.1 199.6 M16 x 764

149-190 2.43** 3.500 2,886 7.26 5.76 0.94 3.50 4.53 7.86 110-140 5.4

80 88.9PN16

12,838 200.2 160.0 23.9 88.9 115.1 222.5 M16 x 768

149-190 2.53** 3.500 2,886 7.88 6.30 0.94 3.50 4.53 8.76 110-140 5.6

100 114.3PN10

21,222 215.9 177.8 23.9 114.3 140.5 235.2 M16 x 768

149-190 3.54** 4.500 4,771 8.50 7.00 0.94 4.50 5.53 9.26 110-140 7.8

100 114.3PN16

21,222 219.9 180.1 23.9 114.3 140.5 239.5 M16 x 768

149-190 3.64** 4.500 4,771 8.66 7.09 0.94 4.50 5.53 9.43 110-140 8.0

125** 139.7PN10

32,436 249.9 210.1 25.4 139.7 165.9 271.5 M16 x 898

149-190 4.2– 5.500 7,292 9.84 8.27 1.00 5.50 6.53 10.69 110-140 9.2

125** 139.7PN16

31,702 249.9 209.8 24.5 139.7 169.2 310.4 M16 x 898

149-190 4.2– 5.500 7,127 9.84 8.26 1.00 5.50 6.66 12.22 110-140 9.2

150** 165.1PN10

44,282 279.4 234.2 24.5 165.1 194.6 298.7 M20 x 898

298-339 4.7– 6.500 9,955 11.00 9.26 1.00 6.50 7.66 11.76 220-250 10.4

150** 165.1PN16

44,282 285.0 240.3 24.5 165.1 194.6 307.3 M20 x 898

298-339 4.8– 6.500 9,955 11.22 9.46 1.00 6.50 7.66 12.10 220-250 10.5

150 168.3PN10 / PN16

77,968 279.4 241.1 25.4 168.1 197.6 301.8 M20 x 898

298-339 4.86 6.625 17,528 11.00 9.49 1.00 6.62 7.78 11.88 220-250 10.6

CA

F B E D

Sizes 50mm - 300mm (2" - 12")

Figure 71 Flange Adapters (PN10/PN16)(Page 1 of 2)




Groo

veD

Coup

linGs

GROOvED COupLiNGS


CA

F B E D

Sizes 50mm - 300mm (2" - 12")

Pipe Size

PN10/PN16

Max †End

LoadN

Lbs.



Wt.kg

Lbs

Nominal mm

Inches

O.D.mm


Size Dia. x Lg

mmInches

Qty.

BoltTorqueRange

Nm

200 219.1PN10

77,968 336.8 292.1 28.6 218.9 254.5 358.6 M20 x 898

298-339 6.98** 8.625 17,528 13.26 11.50 1.125 8.62 9.94 14.12 220-250 15.4

200 219.1PN16

77,968 339.8 295.1 28.6 218.9 254.5 362.7 M20 x 8912

298-339 7.58** 8.625 17,528 13.38 11.62 1.125 8.62 9.94 14.28 220-250 16.6

250 273.0PN10

121,121 395.2 350.0 30.2 273.1 312.4 419.1 M20 x 10212

298-339 9.610** 10.750 27,229 15.56 13.78 1.188 10.75 12.31 16.50 220-250 21.2

250 273.0PN16

170,380 406.4 355.1 30.2 273.1 312.7 428.8 M22 x 10212

434-542 10.210** 10.750 38,303 16.00 13.98 1.188 10.75 12.31 16.88 320-400 22.5

300 323.9PN10

170,380 445.0 399.8 31.8 323.9 363.5 470.4 M22 x 10212

434-542 11.212** 12.750 38,303 17.52 15.74 1.25 12.75 14.31 18.52 320-400 24.8

300 323.9PN16

170,380 460.2 410.0 31.8 323.9 363.5 486.2 M22 x 10212

434-542 13.112** 12.750 38,303 18.12 16.14 1.25 12.75 14.31 19.14 320-400 28.9

MaximumPressureratingis2068kPa(300 psi).* DimensionsDandErepresentminimumandmaximumsealingsurfaces.**Fornotedsizes,PN10andPN16dimensionalvaluesdiffer.† Maximumendloadistotalfromallloadsbasedonstandardweightsteelpipe.Pressureratingsandendloadsmaydifferonotherpipe

materialsand/orwallthickness.ContactGRINNELLMechanicalProductsfordetails.‡ MatingBoltsandNutsarenotsupplied.FlangeMatingBoltsmustbeatleastSAEJ429,Grade5orstronger.Boltlengthsarestandard;

responsibilitylieswiththepurchasertoverifythecorrectlengthfortheintendedapplication.Forinformationonlargersizes,contactGRINNELLMechanicalProducts.Seepage17forgeneralnotes,andseepages140-146forgasketinformation.Seepage165forflangewasheradapterandpage166flangedrillingspecifications

Figure 71 Flange Adapters (PN10/PN16)(Page 2 of 2)


Groo

veD

Coup

linGs

GROOvED COupLiNGS

32 www.grinnell.com

CA

F B E D

Sizes 50mm - 300mm (2" - 12")

Pipe Size Max † End

LoadLbs. N


Flange Mating Bolts ‡ Approx. Wt.Lbs kg

Nominal mm

Inches

O.D.mm


Size Dia. x Lg

mmInches

Qty.

Bolt Torque Range

Nm80 88.9 12,838 200.2 160.0 23.9 88.9 115.1 222.3 M16 x 76

8149-190 2.9

3 3.500 2,886 7.88 6.30 0.94 3.50 4.53 8.75 6.4

100 114.3 21,222 228.6 180.1 23.9 114.3 140.5 251.5 M16 x 768

149-190 3.54 4.500 4,771 9.00 7.09 0.94 4.50 5.53 9.90 7.7

150 168.3 45,999 285.8 240.0 25.4 165.1 191.3 307.8 M20 x 898

298-339 4.86 6.625 10,341 11.25 9.45 1.00 6.50 7.53 12.12 10.6

200 219.1 121,121 339.9 294.9 28.7 218.9 252.5 363.5 M20 x 8912

298-339 6.88 8.625 27,229 13.38 11.61 1.13 8.62 9.94 14.31 15.0

* DimensionsDandErepresentminimumandmaximumsealingsurfaces.† Maximumendloadistotalfromallloadsbasedonstandardweightsteelpipe.Pressureratingsandendloadsmaydifferonotherpipe

materialsand/orwallthickness.ContactGRINNELLMechanicalProductsfordetails.‡ MatingBoltsandNutsarenotsupplied.FlangeMatingBoltsmustbeatleastSAEJ429,Grade5orstronger.Boltlengthsarestandard;

responsibilitylieswiththepurchasertoverifythecorrectlengthfortheintendedapplication.MaximumPressureratingis2,068kPa(300 psi).Forinformationonlargersizes,contactGRINNELLMechanicalProducts.Seepage17forgeneralnotes,andseepages140-146forgasketinformation.Seepage165forflangewasheradapterandpage166flangedrillingspecifications

Figure 71 Flange Adapters (AS2129 Table E)Tech Data Sheet: G150



Groo

veD

Fitt

inGs

GROOvED FiTTiNGS

34 www.grinnell.com

Grooved Fittings Pictorial Table of Contents

Figure 21090° ElbowsPage – 36

Figures 210LR & 310LR

90° Long Radius Elbows

Page – 36

Figure 20145° ElbowsPage – 37

Figures 201LR & 301LR


Page – 37

Figures 212 & 312

22-1⁄2° ElbowsPage – 38

Figures 211 & 311

11-1⁄4° ElbowsPage – 39

Figure 315Groove x Male

Thread 90° ElbowsPage – 40

Figure 316Reducing Base Support Elbows

Page – 40

Figures 3D, 5D & 6D


Pages – 41 - 43

Figure 219 & 319Tees

Page – 44

Figure 320Groove x Groove x Male Thread Tees

Page – 45

Figures 221 & 321

Reducing TeesPages – 46 - 48

Figure 323Groove x Groove x

Thread Reducing Tees

Pages – 49 - 50

Figures 250 & 350

Concentric Reducers

Pages – 51 - 54

Figures 251 & 351

Eccentric ReducersPages – 55 - 57

Figure 372Groove x Male

Thread Concentric ReducersPage – 58

Figure 395Hose Adapter

NipplesPage – 59

Figure 380Female Thread

AdaptersPage – 59

Figures 391, 392 & 393

Adapter NipplesPage – 60

Figures 397, 398 & 399

Swaged NipplesPage – 61

Figure 324True “Ys”Page – 62

Figure 31445° LateralsPage – 63

Figure 32545° Reducing

Laterals

Pages – 64 - 65

Figure 330Tee Wyes

Pages – 66 - 67

Figure 331Reducing Tee Wyes

Page – 68

Figures 227 & 327

CrossesPage – 69

Figures 260 & 360

End CapsPage – 70

Figures 341 & 342

Flange AdaptersPage – 71

Figure 407GTGrove x Thread

Dielectric WaterwaysPage – 72

Figure 407TThread x Thread

Dielectric WaterwaysPage – 72

Groo

veD

Fitt

inGs

GROOvED FiTTiNGS


GRINNELL ductile iron and fabricated steel Grooved Fittings provide an economical and efficient method of changing direction, adding an outlet, and reducing or capping piping systems.

GRINNELL Grooved Fittings are rated at the pressure rating of the coupling in use.


Ductile Iron Fitting Specifications• ASTM A 536 - Standard specification for

ductile iron castings, Grade 65-45-12

• Tensile Strength, minimum 448,159 kPa (65,000 psi)

• Yield Strength, minimum 310,264 kPa (45,000 psi)


• ASTM A 153 – Standard specification for hot-dip galvanising

Fabricated Steel Fitting Specifications

• Carbon Steel: According to ASTM A 53, Grade B

• Tensile Strength, minimum 413,685 kPa (60,000 psi)

• Yield Strength, minimum 241,316 kPa (35,000 psi)

• Sizes 32mm – 250mm (1¼" – 10") Schedule 40

• Sizes 300mm – 600mm (12" – 24") STD (.375)



Threads• NPT

• BSPT


Pipe Size Elbows90°m

Feet

Elbows45°m

Feet

TeeBranch

mFeet

TeeRunm

Feet

Nominal mm

Inches

O.D.mm

Inches

25 33.4 0.5 0.2 1.3 0.51 1.315 1.6 0.7 4.3 1.6

32 42.4 0.6 0.3 1.5 0.61-1⁄4 1.660 1.9 1.0 4.8 1.9

40 48.3 0.7 0.4 1.8 0.71-1⁄2 1.900 2.3 1.2 5.8 2.3

50 60.3 1.0 0.5 2.5 1.02 2.375 3.2 1.6 8.0 3.2

65 73.0 1.2 0.6 3.0 1.22-1⁄2 2.875 3.9 2.0 9.8 3.9

65 76.1 1.2 0.6 3.1 1.2– 3.000 4.1 2.1 10.3 4.1

80 88.9 1.5 0.7 3.7 1.53 3.500 4.9 2.4 12.2 4.9

100 114.3 2.0 1.0 5.0 2.04 4.500 6.5 3.3 16.3 6.5

125 139.7 2.4 1.3 6.1 2.4– 5.500 8.0 4.1 20.0 8.0

125 141.3 2.5 1.3 6.3 2.55 5.563 8.2 4.1 20.5 8.2

150 165.1 2.9 1.4 7.2 2.9– 6.500 9.5 4.8 23.8 9.5

150 168.3 3.0 1.5 7.6 3.06 6.625 9.9 5.0 24.8 9.9

200 219.1 4.0 2.0 10.0 4.08 8.625 13.1 6.6 32.8 13.1

250 273.0 5.0 2.5 12.6 5.010 10.750 16.5 8.3 41.3 16.5

300 323.9 6.1 3.0 15.1 6.112 12.750 19.9 9.9 49.7 19.9

350 355.6 7.0 5.5 20.7 7.014 14.000 23.0 18.0 67.9 23.0

400 406.4 7.9 6.1 23.8 7.916 16.000 25.9 20.0 78.1 25.9

450 457.2 8.8 7.0 25.9 8.818 18.000 28.9 23.0 85.0 28.9

500 508.0 10.1 7.9 30.5 10.120 20.000 33.1 25.9 100.1 33.1

600 609.6 12.2 9.1 35.1 12.224 24.000 40.0 29.9 115.2 40.0

Forreducingteebranches,usevaluecorrespondingtothebranchsize.Forexample,fora200mmx200mmx50mm(8" x 8" x 2")tee,

useabranchvalueof50mm(2")is2.5m(8.0').Forsizesnotlisted,interpolatefromthevaluesshown.ExpressedasEquivalentStraightPipe.

Fitting Friction Resistance Chart

Fittings Specifications



Groo

veD

Fitt

inGs

GROOvED FiTTiNGS

36 www.grinnell.com

Pipe SizeC to Emm

Inches

Approx.Weight

kgLbs.

Nominal mm

Inches

O.D.mm

Inches

32 42.4 69.9 0.51-1⁄4 1.660 2.75 1.040 48.3 69.9 0.6

1-1⁄2 1.900 2.75 1.350 60.3 82.6 0.82 2.375 3.25 1.865 73.0 95.3 1.4

2-1⁄2 2.875 3.75 3.165 76.1 95.3 1.5– 3.000 3.75 3.280 88.9 108.0 2.23 3.500 4.25 4.8

100 114.3 127.0 3.44 4.500 5.00 7.5

125 139.7 139.7 5.1– 5.500 5.50 11.3

125 141.3 139.7 5.35 5.563 5.50 11.6

150 165.1 165.1 7.7– 6.500 6.50 16.9

150 168.3 165.1 7.56 6.625 6.50 16.6

200 ◗ 219.1 196.9 13.48 8.625 7.75 29.6

250 ◗ 273.0 228.6 22.010 10.750 9.00 48.5

300 ◗ 323.9 254.0 30.112 12.750 10.00 66.4

350 355.6 533.4 59.414 14.000 21.0 131.0

400 406.4 609.6 81.616 16.000 24.00 180.0

◗ SizesareavailabletoJISstandards.ContactGRINNELLMechanicalProductsfordetails.

Forinformationonlargersizes,Chinesesizesorotheralternativesizes,contactGRINNELLMechanicalProducts.

Seefittingspecificationsonpage35.

C to E

Pipe SizeFigure 210LR -

CastFigure 310LR -

Fabricated

Nominal mm

Inches

O.D.mm

Inches

C to Emm

Inches

Approx.Weight

kgLbs.

C to Emm

Inches

Approx.Weight

kgLbs.

50 60.3 111.3 1.2 – –2 2.375 4.38 2.7 – –65 73.0 127.0 1.9 – –

2-1⁄2 2.875 5.00 4.2 – –65 76.1 127.0 2.0 – –– 3.000 5.00 4.4 – –80 88.9 149.4 2.9 – –3 3.500 5.88 6.5 – –

100 114.3 190.5 5.2 – –4 4.500 7.50 11.5 – –

125 139.7 241.3 8.6 – –– 5.500 9.50 19.0 – –

125 141.3 241.3 8.8 – –5 5.563 9.50 19.4 – –

150 165.1 273.1 12.0 – –– 6.500 10.75 26.4 – –

150 168.3 273.1 12.6 – –6 6.625 10.75 27.9 – –

200 219.1 362.0 24.7 – –8 8.625 14.25 54.5 – –

250 273.0 – – 457.2 45.410 10.750 – – 18.00 100.0300 323.9 – – 533.4 63.512 12.750 – – 21.00 140.0350 355.6 – – 533.4 59.414 14.000 – – 21.0 131.0

400 406.4 – – 609.6 81.616 16.000 – – 24.00 180.0

450 457.2 – – 685.8 127.018 18.000 – – 27.00 280.0500 508.0 – – 838.2 158.820 20.000 – – 33.00 350.0600 609.6 – – 914.4 217.724 24.000 – – 36.00 480.0



C to E

Figure 310LR 90° Fabricated Elbow

(Shown)

Figure 210 90° Cast ElbowsTech Data Sheet: G180

Figures 210LR & 310LR 90° Long Radius ElbowsTech Data Sheet: G180

Groo

veD

Fitt

inGs

GROOvED FiTTiNGS


Pipe SizeC to Emm

Inches

Approx.Weight

kgLbs.

Nominal mm

Inches

O.D.mm

Inches

32 42.4 44.5 0.41-1⁄4 1.660 1.75 0.940 48.3 44.5 0.4

1-1⁄2 1.900 1.75 0.950 60.3 50.8 0.62 2.375 2.00 1.365 73.0 57.2 1.0

2-1⁄2 2.875 2.25 2.165 76.1 57.2 1.0– 3.000 2.25 2.280 88.9 63.5 1.63 3.500 2.50 3.5

100 114.3 76.2 2.54 4.500 3.00 5.5

125 139.7 82.6 3.5– 5.500 3.25 7.7

125 141.3 82.6 3.75 5.563 3.25 8.1

150 165.1 88.9 5.0– 6.500 3.50 11.0

150 168.3 88.9 5.16 6.625 3.50 11.2

200 ◗ 219.1 108.0 8.68 8.625 4.25 19.0

250 ◗ 273.0 120.7 12.710 10.750 4.75 28.0

300 ◗ 323.9 133.4 22.012 12.750 5.25 48.0




C to E

Pipe SizeFigure 201LR -

CastFigure 301LR -

FabricatedNominal

mmInches

O.D.mm

Inches

C to Emm

Inches

Approx.Weightkg, Lbs.

C to Emm

Inches

Approx.Weightkg Lbs.

32 42.4 – – 63.5 0.51-1⁄4 1.660 – – 2.50 1.140 48.3 – – 63.5 0.6

1-1⁄2 1.900 – – 2.50 1.350 60.3 – – 69.9 0.82 2.375 – – 2.75 1.865 73.0 – – 76.2 1.3

2-1⁄2 2.875 – – 3.00 2.965 76.1 – – 76.2 1.4– 3.000 – – 3.00 3.180 88.9 – – 85.9 2.13 3.500 – – 3.38 4.6

100 114.3 – – 101.6 3.44 4.500 – – 4.00 7.5

125 139.7 – – 127.0 5.7– 5.500 – – 5.00 12.5

125 141.3 – – 127.0 5.75 5.563 – – 5.00 12.5

150 165.1 – – 139.7 5.4– 6.500 – – 5.50 12.0

150 168.3 – – 139.7 5.46 6.625 – – 5.50 12.0

200 219.1 – – 184.2 15.48 8.625 – – 7.25 34.0

250 273.0 – – 215.9 25.410 10.750 – – 8.50 56.0300 323.9 – – 254.0 44.512 12.750 – – 10.00 98.0350 355.6 228.3 27.2 – –14 14.000 8.75 60.0 – –

400 406.4 254.0 44.0 – –16 16.000 10.00 97.0 – –

450 457.2 – – 285.8 65.818 18.000 – – 11.25 145.0500 508.0 – – 317.5 81.620 20.000 – – 12.50 180.0600 609.6 – – 381.0 133.424 24.000 – – 15.00 250.0



C to E

Figure 201 45° Cast ElbowsTech Data Sheet: G180

Figures 201LR & 301LR 45° Long Radius Elbows


Figure 301LR 45° Fabricated Elbow

(Shown)

Groo

veD

Fitt

inGs

GROOvED FiTTiNGS

38 www.grinnell.com

Figure 312 221⁄2° Fabricated Elbow

Figure 212 221⁄2° Cast Elbow

Pipe Size Figure 212 - Cast Figure 312 - Fabricated

Nominal mm

Inches

O.D.mm

Inches

C to Emm

Inches

Approx.Weight

kgLbs.

C to Emm

Inches

Approx.Weight

kgLbs.

32 42.4 44.5 0.4 – –1-1⁄4 1.660 1.75 0.8 – –

40 48.3 44.5 0.5 – –1-1⁄2 1.900 1.75 1.0 – –

50 60.3 47.8 0.6 – –2 2.375 1.88 1.3 – –

65 73.0 50.8 0.9 – –2-1⁄2 2.875 2.00 1.9 – –

65 76.1 50.8 0.9 – –– 3.000 2.00 2.0 – –

80 88.9 57.2 1.3 – –3 3.500 2.25 2.9 – –

100 114.3 66.8 2.1 – –4 4.500 2.63 4.7 – –

125 139.7 73.2 3.1 – –– 5.500 2.88 6.9 – –

125 141.3 73.2 3.1 – –5 5.563 2.88 6.9 – –

150 165.1 79.5 4.3 – –– 6.500 3.13 9.4 – –

150 168.3 79.5 4.3 – –6 6.625 3.13 9.4 – –

200 219.1 98.6 7.7 – –8 8.625 3.88 17.0 – –

250 273.0 – – 111.3 6.410 10.750 – – 4.38 14.0

300 323.9 – – 124.0 10.012 12.750 – – 4.88 22.0

350 355.6 – – 127.0 20.914 14.000 – – 5.00 46.0

400 406.4 – – 127.0 23.716 16.000 – – 5.00 52.2

450 457.2 – – 139.7 29.518 18.000 – – 5.50 65.0

500 508.0 – – 152.4 36.320 20.000 – – 6.00 80.0

600 609.6 – – 177.8 50.824 24.000 – – 7.00 112.0



C to E

C to E

Figures 212 & 312 22-1⁄2° ElbowsTech Data Sheet: G180

Groo

veD

Fitt

inGs

GROOvED FiTTiNGS


Figure 311 111⁄4° Fabricated Elbow

Figure 211 111⁄4° Cast Elbow


Nominal mm

Inches

O.D.mm

Inches

C to Emm

Inches

Approx.Weight

kgLbs.

C to Emm

Inches

Approx.Weight

kgLbs.

32 42.4 35.1 0.3 – –1-1⁄4 1.660 1.38 0.7 – –

40 48.3 35.1 0.4 – –1-1⁄2 1.900 1.38 0.8 – –

50 60.3 35.1 0.5 – –2 2.375 1.38 1.1 – –

65 73.0 38.1 0.7 – –2-1⁄2 2.875 1.50 1.6 – –

65 76.1 38.1 0.7 – –– 3.000 1.50 1.7 – –

80 88.9 38.1 1.0 – –3 3.500 1.50 2.2 – –

100 114.3 44.5 1.5 – –4 4.500 1.75 3.4 – –

125 139.7 50.8 2.3 – –– 5.500 2.00 5.1 – –

125 141.3 50.8 2.4 – –5 5.563 2.00 5.2 – –

150 165.1 50.8 2.9 – –– 6.500 2.00 6.4 – –

150 168.3 50.8 2.9 – –6 6.625 2.00 6.5 – –

200 219.1 50.8 4.2 – –8 8.625 2.00 9.2 – –

250 273.0 – – 54.1 4.110 10.750 – – 2.13 9.1

300 323.9 – – 57.2 7.612 12.750 – – 2.25 16.7

350 355.6 – – 88.9 14.614 14.000 – – 3.50 32.1

400 406.4 – – 101.6 19.116 16.000 – – 4.00 42.0

450 457.2 – – 114.3 24.218 18.000 – – 4.50 53.2

500 508.0 – – 127.0 29.820 20.000 – – 5.00 65.7

600 609.6 – – 152.4 43.5

24 24.000 – – 6.00 96.0



C to E

C to E

Figures 211 & 311 11-1⁄4° Elbows


Groo

veD

Fitt

inGs

GROOvED FiTTiNGS

40 www.grinnell.com

Pipe SizeC to GE

mmInches

C to TEmm

Inches

Approx. Weight

kgLbs.

Nominal mm

Inches

O.D.mm

Inches

32 42.4 69.9 69.9 0.41-1⁄4 1.660 2.75 2.75 0.9

40 48.3 69.9 69.9 0.51-1⁄2 1.900 2.75 2.75 1.2

50 60.3 82.6 108.0 0.92 2.375 3.25 4.25 2.0

60 73.0 95.3 95.3 1.42-1⁄2 2.875 3.75 3.75 3.1

80 88.9 108.0 152.4 2.63 3.500 4.25 6.00 5.7

100 114.3 127.0 184.2 4.44 4.500 5.00 7.25 9.8

150 168.3 165.1 165.1 8.06 6.625 6.50 6.50 17.6

Note:AvailablewithBSPTandNPTtypethreadsForinformationonlargersizes,contactGRINNELLMechanicalProducts.Seefittingspecificationsonpage35.

C to TE

C to GE

Pipe SizeC to Emm

Inches

Hmm

Inches

B Dia.NPSC

Threaded mm

Inches

Approx.Wt. Ea.

KgLbs

Nominal mm

Inches

Grooved End O.D.mm

Inches

Flanged End O.D.mm

Inches

150 x 100 168.3 114.3 304.8 63.5 38.1 17.56 x 4 6.625 4.500 12.0 2.5 1.5 38.5

150 x 125 168.3 141.3 317.5 63.5 38.1 20.66 x 5 6.625 5.563 12.5 2.5 1.5 45.4

200 x 125 219.1 141.3 393.7 76.2 38.1 29.78 x 5 8.625 5.563 15.5 3.0 1.5 65.5

200 x 150 219.1 168.3 393.7 76.2 38.1 33.18 x 6 8.625 6.625 15.5 3.0 1.5 73.0

250 x 150 273.1 168.3 469.9 88.9 38.1 45.410 x 6 10.750 6.625 18.5 3.5 1.5 100.0

250 x 200 273.1 219.1 482.6 88.9 38.1 57.410 x 8 10.750 8.625 19.0 3.5 1.5 126.5

300 x 200 323.9 219.1 558.8 101.6 38.1 70.312 x 8 12.750 8.625 22.0 4.0 1.5 155.0

300 x 250 323.9 273.1 558.8 101.6 38.1 84.412 x 10 12.750 10.750 22.0 4.0 1.5 186.0

Forinformationonlargersizes,contactGRINNELLMechanicalProducts.Seefittingspecificationsonpage35.

C to E

B

H

C to E

Figure 315 Groove x Male Thread 90° ElbowsTech Data Sheet: G180

Figure 316 Reducing Base Support ElbowTech Data Sheet: G180

Groo

veD

Fitt

inGs

GROOvED FiTTiNGS


Pipe Size310-3D

90° Elbow306-3D

60° Elbow301-3D

45° Elbow303-3D

30° Elbow312-3D

221⁄ 2° Elbow313-3D

111⁄4° Elbow

Nominal mm

Inches

O.D.mm

Inches

C to E mm

Inches

ApproxWeight

KgLbs.

C to Emm

Inches

ApproxWeight

KgLbs.

C to E mm

Inches

ApproxWeight

KgLbs.

C to E mm

Inches

ApproxWeight

KgLbs.

C to E mm

Inches

ApproxWeight

KgLbs.

C to E mm

Inches

ApproxWeight

KgLbs.

50 60.3 254 2.4 191 2 165 1.8 146 1.5 133 1.5 114 1.32 2.375 10 5.3 7-1⁄2 4.3 6-1⁄2 3.9 5-3⁄4 3.4 5-1⁄4 3.2 4-1⁄2 2.8

65 73.0 292 4.3 210 3.5 184 3 152 2.6 140 2.4 121 2.12-1⁄2 2.875 11-1⁄2 9.5 8-1⁄4 7.7 7-1⁄4 6.7 6 5.8 5-1⁄2 5.3 4-3⁄4 4.6

80 88.9 330 6.4 235 5 197 4.3 165 3.6 146 3.3 127 2.83 3.500 13 14 9-1⁄4 11 7-3⁄4 9.5 6-1⁄2 8 5-3⁄4 7.3 5 6.2

100 114.3 406 10.9 279 8.4 229 7.1 184 5.8 165 5.2 133 4.24 4.500 16 24.1 11 18.5 9 15.7 7-1⁄4 12.8 6-1⁄2 11.4 5-1⁄4 9.3

125 141.3 508 18.6 349 14.2 286 12 229 9.9 203 8.8 165 7.25 5.563 20 40.9 13-3⁄4 31.3 11-1⁄4 26.5 9 21.8 8 19.4 6-1⁄2 15.8

150 168.3 610 28.9 419 22.1 343 18.7 273 15.4 241 13.7 197 11.26 6.625 24 63.7 16-1⁄2 48.8 13-1⁄2 41.3 10-3⁄4 33.9 9-1⁄2 30.1 7-3⁄4 24.6

200 219.1 813 58 559 44.4 457 37.6 368 30.8 324 27.4 267 22.48 8.625 32 127.8 22 97.9 18 82.9 14-1⁄2 68 12-3⁄4 60.5 10-1⁄2 49.3

250 273.1 1016 102.7 692 78.7 572 66.6 457 54.7 406 48.6 330 39.610 10.750 40 226.4 27-1⁄4 173.4 22-1⁄2 146.9 18 120.5 16 107.2 13 87.3

300 323.9 1219 150.9 832 115.6 686 97.9 552 80.3 489 71.4 394 58.212 12.750 48 332.7 32-3⁄4 254.8 27 215.9 21-3⁄4 177 19-1⁄4 157.5 15-1⁄2 128.3

350 355.6 1422 193.8 972 148.5 800 103.1 641 103.1 572 91.8 464 74.814 14.000 56 427.3 38-1⁄4 327.3 31-1⁄2 227.3 25-1⁄4 227.3 22-1⁄2 202.3 18-1⁄4 164.8

400 406.4 1626 254.1 1111 194.6 914 164.9 737 135.1 648 120.3 527 9816 16.000 64 560.1 43-3⁄4 429 36 363.5 29 297.9 25-1⁄2 265.2 20-3⁄4 216

450 457.2 1829 322.4 1251 246.9 1029 209.2 826 171.5 730 152.6 593 124.318 18.000 72 710.7 49-1⁄4 544.4 40-1⁄2 461.3 32-1⁄2 378.1 28-3⁄4 336.5 23.35 274.1

500 508.0 2032 398.8 1391 305.5 1143 245.3 914 212.2 813 188.8 660 153.920 20.000 80 879.3 54-3⁄4 673.5 45 540.7 36 467.8 32 416.3 26 339.2

600 609.6 2438 576.2 1664 441.3 1365 373.9 1099 306.5 972 272.8 787 222.324 24.000 96 1270.3 65-1⁄2 973 53-3⁄4 824.4 43-1⁄4 675.7 38-1⁄4 601.4 31 490

LongradiusElbows3D,5D,and6D,insizesuptoandincluding100mm(4"),areprovidedwith100mm(4")longintegraltangent.Remainingsizesprovidedwithintegraltangentswithlengthsequaltonominalpipesize.

Groovedorplain-endavailable;specifychoiceonorder.MaterialisstandardwallsteelpipetoASTMA53,GradeB.(Othermaterialsavailableonrequest).Elbowbendstoconformtoaboveradii.CtoEtolerances:50mm-150mm(2"-6")±3.2mm( 1⁄8");200mm-400mm(8" - 16)±6.4mm( 1⁄4");

450mm-600mm(18"-24")±9.5mm( 3⁄8").Allweightsareapproximate,basedoncalculatedweightofpipe.Forinformationonlargersizes,contactGRINNELLMechanicalProducts.Seefittingspecificationsonpage35.

Figure 301-3D(45°)

C to E

R = 3D

Figure 303-3D(30°)

C to E

R = 3D

Figure 306-3D(60°)

C to E

R = 3D

Figure 310-3D(90°)

C to E

R = 3D

C to E

R = 3D

Figure 312-3D(22.5°)

Figure 313-3D(11.25°)

R = 3D

C to E

Long Radius 3D ElbowsTech Data Sheet: G180

Groo

veD

Fitt

inGs

GROOvED FiTTiNGS

42 www.grinnell.com

Pipe Size310-5D

90° Elbow306-5D

60° Elbow301-5D

45° Elbow303-5D

30° Elbow312-5D

221⁄ 2° Elbow313-5D

111⁄4° Elbow

Nominal mm

Inches

O.D.mm

Inches

C to E mm

Inches

ApproxWeight

KgLbs.

C to Emm

Inches

ApproxWeight

KgLbs.

C to E mm

Inches

ApproxWeight

KgLbs.

C to E mm

Inches

ApproxWeight

KgLbs.

C to E mm

Inches

ApproxWeight

KgLbs.

C to E mm

Inches

ApproxWeight

KgLbs.

50 60.3 356 3.3 248 2.5 210 2.2 171 1.8 152 1.6 127 1.42 2.375 14 7.2 9-3⁄4 5.6 8-1⁄4 4.8 6-3⁄4 4 6 3.6 5 3

65 73.0 419 6 286 4.6 235 3.9 191 3.2 165 2.8 133 2.32-1⁄2 2.875 16-1⁄2 13.3 11-1⁄4 10.2 9-1⁄4 8.6 7-1⁄2 7 6-1⁄2 6.2 5-1⁄4 5

80 88.9 483 9 324 6.8 260 5.7 203 4.5 178 4 140 3.13 3.500 19 19.9 12-3⁄4 15 10-1⁄4 12.5 8 10 7 8.8 5-1⁄2 6.9

100 114.3 610 16.1 394 11.8 318 9.7 241 7.5 203 6.5 152 4.94 4.500 24 35.4 15-1⁄2 26 12-1⁄2 21.3 9-1⁄2 16.6 8 14.3 6 10.7

125 141.3 762 27.2 495 20 394 16.4 298 12.7 254 10.9 191 8.35 5.563 30 60 19-1⁄2 44.1 15-1⁄2 36.1 11-3⁄4 28.1 10 24.1 -1⁄2 18.2

150 168.3 914 42.4 591 31.1 470 25.5 356 19.9 305 17.1 229 12.86 6.625 36 93.5 23-1⁄4 68.6 18-1⁄2 56.2 14 43.8 12 37.6 9 28.3

200 219.1 1219 85.1 787 62.5 622 51.2 476 39.9 406 34.2 305 25.88 8.625 48 187.6 31 137.7 24-1⁄2 112.8 18-3⁄4 87.9 16 75.4 12 56.8

250 273.1 1524 150.8 991 110.7 781 90.7 597 70.7 508 60.6 381 45.610 10.750 60 332.4 39 244.1 30-3⁄4 199.9 23-1⁄2 155.8 20 133.7 15 100.6

300 323.9 1829 221.5 1187 162.7 940 133.2 711 103.8 610 89.1 457 6712 12.750 72 488.4 46-3⁄4 358.6 37 293.7 28 228.9 24 196.4 18 147.8

350 355.6 2134 284.6 1384 209 1092 171.1 832 133.4 711 114.4 533 86.114 14.000 84 627.4 54-1⁄2 460.7 43 377.3 32-3⁄4 294 28 252.3 21 189.8

400 406.4 2438 372.9 1581 273.9 1251 224.3 953 174.8 813 150 610 112.916 16.000 96 822.2 62-1⁄4 603.8 49-1⁄4 494.5 37-1⁄2 385.3 32 330.7 24 248.8

450 457.2 2743 473.3 1778 347.5 1403 284.7 1073 221.8 914 190.4 686 143.218 18.000 108 1,043.40 70 766.2 55-1⁄4 627.6 42-1⁄4 489 36 419.7 27 315.7

500 508.0 3048 585.5 1975 430 1562 352.2 1187 274.4 1016 235.5 762 177.220 20.000 120 1,290.90 77-3⁄4 947.90 61-1⁄2 776.4 46-3⁄4 605 40 519.2 30 390.6

600 609.6 3658 845.9 2369 621.1 1873 508.7 1429 396.4 1219 340.2 908 25624 24.000 144 1,864.80 93-1⁄4 1,369.30 73-3⁄4 1,121.60 56-1⁄4 873.9 48 750.1 35-3⁄4 564.3




Figure 301-5D(45°)

C to E

R = 5D

Figure 303-5D(30°)

C to E

R = 5D

Figure 306-5D(60°)

C to E

R = 5D

Figure 310-5D(90°)

C to E

R = 5D

C to E

R = 5D

Figure 312-5D(22.5°)

Figure 313-5D(11.25°)

R = 5D

C to E


Groo

veD

Fitt

inGs

GROOvED FiTTiNGS


Pipe Size310-6D

90° Elbow306-6D

60° Elbow301-6D

45° Elbow303-6D

30° Elbow312-6D

221⁄ 2° Elbow313-6D

111⁄4° Elbow

Nominal mm

Inches

O.D.mm

Inches

C to E mm

Inches

ApproxWeight

KgLbs.

C to Emm

Inches

ApproxWeight

KgLbs.

C to E mm

Inches

ApproxWeight

KgLbs.

C to E mm

Inches

ApproxWeight

KgLbs.

C to E mm

Inches

ApproxWeight

KgLbs.

C to E mm

Inches

ApproxWeight

KgLbs.

50 60.3 406 3.7 279 2.9 229 2.4 184 2 165 1.8 133 1.52 2.375 16 8.2 11 6.3 9 5.3 7-1⁄4 4.3 6-1⁄2 3.9 5-1⁄4 3.2

65 73.0 483 6.9 324 5.2 260 4.3 203 3.5 178 3 140 2.42-1⁄2 2.875 19 15.2 12-3⁄4 11.4 10-1⁄4 9.5 8 7.7 7 6.7 5-1⁄2 5.3

80 88.9 559 10.4 368 7.7 292 6.4 222 5 191 4.3 146 3.33 3.500 22 22.9 14-1⁄2 17 11-1⁄2 14 8-3⁄4 11 7-1⁄2 9.5 5-3⁄4 7.3

100 114.3 711 18.6 457 13.5 356 10.9 267 8.4 222 7.1 165 5.24 4.500 28 41.1 18 29.8 14 24.1 10-1⁄2 18.5 8-3⁄4 15.7 6-1⁄2 11.4

125 141.3 889 31.6 565 22.9 445 18.6 330 14.2 279 12 203 8.85 5.563 35 69.6 22-1⁄4 50.5 17-1⁄2 40.9 13 31.3 11 26.5 8 19.4

150 168.3 1067 49.2 679 35.7 533 28.9 400 22.1 337 18.7 241 13.76 6.625 42 108.4 26-3⁄4 78.6 21 63.7 15-3⁄4 48.8 13-1⁄4 41.3 9-1⁄2 30.1

200 219.1 1422 98.7 908 71.5 711 58 533 44.4 445 37.6 324 27.48 8.625 56 217.5 35-3⁄4 157.7 28 127.8 21 97.9 17-1⁄2 82.9 12-3⁄4 60.5

250 273.1 1778 174.8 1137 126.7 889 102.7 660 78.7 559 66.6 406 48.610 10.750 70 385.4 44-3⁄4 279.4 35 226.4 26 173.4 22 146.9 16 107.2

300 323.9 2134 256.8 1359 186.2 1060 150.9 794 115.6 667 97.9 483 71.412 12.750 84 566.2 53-1⁄2 410.5 41-3⁄4 332.7 31-1⁄4 254.8 26-1⁄4 215.9 19 157.5

350 355.6 2489 329.9 1588 239.2 1238 193.8 927 148.5 781 125.8 565 91.814 14.000 98 727.4 62-1⁄2 527.3 48-3⁄4 427.3 36-1⁄2 327.3 30-3⁄4 277.3 22-1⁄4 202.3

400 406.4 2845 432.4 1816 313.5 1416 254.1 1060 194.6 895 164.9 648 120.316 16.000 112 953.3 71-1⁄2 691.1 55-3⁄4 560.1 41-3⁄4 429 35-1⁄4 363.5 25-1⁄2 265.2

450 457.2 3200 548.7 2045 397.8 1594 322.4 1194 246.9 1003 209.2 730 152.618 18.000 126 1,209.70 80-1⁄2 877.1 62-3⁄4 710.7 47 544.4 39-1⁄2 461.3 28-3⁄4 336.5

500 508.0 3556 678.8 2267 492.2 1772 398.8 1327 305.5 1118 258.9 806 188.820 20.000 140 1,496.60 89-1⁄4 1,085.10 69-3⁄4 879.3 52-1⁄4 673.5 44 570.7 31-3⁄4 416.3

600 609.6 4267 980.7 2724 711 2127 576.2 1588 441.3 1329 373.9 972 272.824 24.000 168 2,162.00 107-1⁄4 1,567.50 83-3⁄4 1,270.30 62-1⁄2 973 52.34 824.4 38-1⁄4 601.4




Figure 301-6D(45°)

C to E

R = 6D

Figure 303-6D(30°)

C to E

R = 6D

Figure 306-6D(60°)

C to E

R = 6D

Figure 310-6D(90°)

C to E

R = 6D

C to E

R = 6D

Figure 312-6D(22.5°)

Figure 313-6D(11.25°)

R = 6D

C to E


Groo

veD

Fitt

inGs

GROOvED FiTTiNGS

44 www.grinnell.com

Figure 219 Cast Tee

Figure 319 Fabricated Tee


Nominal mm

Inches

O.D.mm

Inches

C to Emm

Inches

ApproxWeight

KgLbs.

C to Emm

Inches

ApproxWeight

KgLbs.

32 42.4 69.9 0.8 – –1-1⁄4 1.660 2.75 1.7 – –

40 48.3 69.9 1.0 – –1-1⁄2 1.900 2.75 2.1 – –

50 60.3 82.6 1.2 – –2 2.375 3.25 2.7 – –

65 73.0 95.3 2.0 – –2-1⁄2 2.875 3.75 4.4 – –

65 76.1 95.3 2.9 – –– 3.000 3.75 6.5 – –

80 88.9 108.0 2.9 – –3 3.500 4.25 6.5 – –

100 114.3 127.0 4.8 – –4 4.500 5.00 10.7 – –

125 139.7 139.7 6.9 – –– 5.500 5.50 15.2 – –

125 141.3 139.7 7.0 – –5 5.563 5.50 15.5 – –

150 165.1 165.1 11.0 – –– 6.500 6.50 24.2 – –

150 168.3 165.1 10.4 – –6 6.625 6.50 23.0 – –

200 216.3 196.9 19.5 – –– 8.500 7.75 43.0 – –

200 ◗ 219.1 196.9 19.8 – –

8 8.625 7.75 43.7 – –

250 ◗ 273.0 228.6 25.9 – –

10 10.750 9.00 57.0 – –

300 ◗ 323.9 254.0 49.9 – –

12 12.750 10.00 110.0 – –

350 355.6 279.0 61.2 – –14 14.000 11.00 135.0 – –

400 406.4 305.0 61.7 – –16 16.000 12.00 136.0 – –

450 457.2 – – 394.0 98.918 18.000 – – 15.50 218.0

500 508.0 – – 438.0 125.020 20.000 – – 17.25 275.0

600 609.6 – – 508.0 172.024 24.000 – – 20.00 379.0




C to E

C to E

C to E

C to E

Figures 219 & 319 TeesTech Data Sheet: G180

Groo

veD

Fitt

inGs

GROOvED FiTTiNGS


Pipe SizeC to GE

mmInches

C to TEmm

Inches

Approx. Weight

kgLbs.

Nominal mm

Inches

O.D.mm

Inches

32 42.4 69.9 69.9 0.71-1⁄4 1.660 2.75 2.75 1.5

40 48.3 69.9 69.9 0.91-1⁄2 1.900 2.75 2.75 1.9

50 60.3 82.6 108.0 1.52 2.375 3.25 4.25 3.2

60 73.0 95.3 95.3 1.82-1⁄2 2.875 3.75 3.75 4.0

80 88.9 108.0 152.4 2.73 3.500 4.25 6.00 6.0

100 114.3 127.0 184.2 5.04 4.500 5.00 7.25 11.0

125 141.3 139.7 139.7 10.55 5.563 5.50 5.50 23.0

150 168.3 165.1 165.1 10.56 6.625 6.50 6.50 23.0

200 219.1 196.9 196.9 17.68 8.625 7.75 7.75 38.7

250 273.0 228.6 228.6 32.810 10.750 9.00 9.00 72.1

300 323.9 254.0 254.0 42.012 12.750 10.00 10.00 92.5


AvailablewithBSPthreads.ContactGRINNELLMechanicalProductsfordetails.


C to TE

C to GE

Figure 320 Groove x Groove x Male Thread TeesTech Data Sheet: G180

Groo

veD

Fitt

inGs

GROOvED FiTTiNGS

46 www.grinnell.com


Nominal mm

Inches

O.D.mm

Inches

C to Emm

Inches

Approx. Weight

kgLbs.

C to Emm

Inches

Approx. Weight

kgLbs.

40 x 40 x 32 48.3 x 48.3 x 42.4 – – 69.9 0.71-1⁄2 x 1-1⁄2 x 1-1⁄4 1.900 x 1.900 x 1.660 – – 2.75 1.5

50 x 50 x 25 60.3 x 60.3 x 33.4 – – 88.6 0.742 x 2 x 1 2.375 x 2.375 x 1.315 – – 3.25 1.6

50 x 50 x 40 60.3 x 60.3 x 48.3 82.6 1.2 – –2 x 2 x 1-1⁄2 2.375 x 2.375 x 1.900 3.25 2.7 – –65 x 65 x 25 73.0 x 73.0 x 33.4 – – 95.3 1.1

2-1⁄2 x 2-1⁄2 x 1 2.875 x 2.875 x 1.315 – – 3.75 2.365 x 65 x 32 73.0 x 73.0 x 42.4 – – 95.3 1.9

2-1⁄2 x 2-1⁄2 x 1-1⁄4 2.875 x 2.875 x 1.660 – – 3.75 4.265 x 65 x 40 73.0 x 73.0 x 48.3 – – 95.3 1.9

2-1⁄2 x 2-1⁄2 x 1-1⁄2 2.875 x 2.875 x 1.900 – – 3.75 4.265 x 65 x 50 73.0 x 73.0 x 60.3 95.3 1.9 – –

2-1⁄2 x 2-1⁄2 x 2 2.875 x 2.875 x 2.375 3.75 4.2 – –65 x 65 x 40 76.1 x 76.1 x 48.3 95.3 2.0 – –

– 3.000 x 3.000 x 1.900 3.75 4.5 – –65 x 65 x 50 76.1 x 76.1 x 60.3 95.3 2.0 – –

– 3.000 x 3.000 x 2.375 3.75 4.3 – –80 x 80 x 25 88.9 x 88.9 x 33.4 108.0 2.5 – –

3 x 3 x 1 3.500 x 3.500 x 1.315 4.25 5.6 – –80 x 80 x 40 88.9 x 88.9 x 48.3 108.0 2.7 – –3 x 3 x 1-1⁄2 3.500 x 3.500 x 1.900 4.25 5.9 – –80 x 80 x 50 88.9 x 88.9 x 60.3 108.0 2.7 – –

3 x 3 x 2 3.500 x 3.500 x 2.375 4.25 6.0 – –80 x 80 x 65 88.9 x 88.9 x 73.0 108.0 2.8 – –3 x 3 x 2-1⁄2 3.500 x 3.500 x 2.875 4.25 6.2 – –80 x 80 x 65 88.9 x 88.9 x 76.1 108.0 2.7 – –

– 3.500 x 3.500 x 3.000 4.25 6.0 – –100 x 100 x 25 114.3 x 114.3 x 33.4 – – 95.3 3.7

4 x 4 x 1 4.500 x 4.500 x 1.315 – – 3.75 8.0100 x 100 x 32 114.3 x 114.3 x 42.4 – – 127.0 4.44 x 4 x 1-1⁄4 4.500 x 4.500 x 1.660 – – 5.00 9.8

100 x 100 x 40 114.3 x 114.3 x 48.3 – – 127.0 4.54 x 4 x 1-1⁄2 4.500 x 4.500 x 1.900 – – 5.00 9.9

100 x 100 x 50 114.3 x 114.3 x 60.3 127.0 4.1 – –4 x 4 x 2 4.500 x 4.500 x 2.375 5.00 9.1 – –

100 x 100 x 65 114.3 x 114.3 x 73.0 127.0 4.3 – –4 x 4 x 2-1⁄2 4.500 x 4.500 x 2.875 5.00 9.5 – –

100 x 100 x 65 114.3 x 114.3 x 76.1 127.0 4.3 – –– 4.500 x 4.500 x 3.000 5.00 9.5 – –

100 x 100 x 80 114.3 x 114.3 x 88.9 127.0 4.4 – –4 x 4 x 3 4.500 x 4.500 x 3.500 5.00 9.7 – –

125 x 125 x 80 139.7 x 139.7 x 88.9 139.7 5.8 – –– 5.500 x 5.500 x 3.500 5.50 12.7 – –

Figure 221 Reducing Tee Cast

Figure 321 Reducing Tee Fabricated

C to E

C to E

C to E

C to E

Figure 221 Reducing Tee Cast Figure 321 Reducing Tee Fabricated

Figures 221 & 321 Reducing Tees(Page 1 of 3)


Groo

veD

Fitt

inGs

GROOvED FiTTiNGS





Nominal mm

Inches

O.D.mm

Inches

C to Emm

Inches

Approx. Weight

kgLbs.

C to Emm

Inches

Approx. Weight

kgLbs.

125 x 125 x 100 139.7 x 139.7 x 114.3 139.7 6.1 – –– 5.500 x 5.500 x 4.500 5.50 13.4 – –

125 x 125 x 50 141.3 x 141.3 x 60.3 – – 139.7 6.65 x 5 x 2 5.563 x 5.563 x 2.375 – – 5.50 14.5

125 x 125 x 65 141.3 x 141.3 x 73.0 139.7 8.2 – –5 x 5 x 2-1⁄2 5.563 x 5.563 x 2.875 5.50 18.0 – –

125 x 125 x 80 141.3 x 141.3 x 88.9 139.7 6.4 – –5 x 5 x 3 5.563 x 5.563 x 3.500 5.50 14.0 – –

125 x 125 x 100 141.3 x 141.3 x 114.3 139.7 6.3 – –5 x 5 x 4 5.563 x 5.563 x 4.500 5.50 13.9 – –

150 x 150 x 80 165.1 x 165.1 x 88.9 165.1 8.2 – –– 6.500 x 6.500 x 3.500 6.50 18.0 – –

150 x 150 x 100 165.1 x 165.1 x 114.3 165.1 8.9 – –– 6.500 x 6.500 x 4.500 6.50 19.5 – –

150 x 150 x 50 168.3 x 168.3 x 60.3 165.1 8.8 – –6 x 6 x 2 6.625 x 6.625 x 2.375 6.50 19.4 – –

150 x 150 x 65 168.3 x 168.3 x 73.0 165.1 9.8 – –6 x 6 x 2-1⁄2 6.625 x 6.625 x 2.875 6.50 21.2 – –

150 x 150 x 65 168.3 x 168.3 x 76.1 165.1 9.8 – –– 6.625 x 6.625 x 3.000 6.50 21.2 – –

150 x 150 x 80 168.3 x 168.3 x 88.9 165.1 9.5 – –6 x 6 x 3 6.625 x 6.625 x 3.500 6.50 21.0 – –

150 x 150 x 100 168.3 x 168.3 x 114.3 165.1 9.9 – –6 x 6 x 4 6.625 x 6.625 x 4.500 6.50 21.8 – –

150 x 150 x 125 168.3 x 168.3 x 139.7 165.1 10.4 – –– 6.625 x 6.625 x 5.500 6.50 23.0 – –

150 x 150 x 125 168.3 x 168.3 x 141.3 – – 165.1 12.26 x 6 x 5 6.625 x 6.625 x 5.563 – – 6.50 27.0

200 x 200 x 50 ◗ 219.1 x 219.1 x 60.3 – – 196.9 16.48 x 8 x 2 8.625 x 8.625 x 2.375 – – 7.75 36.2

200 x 200 x 65 ◗ 219.1 x 219.1 x 73.0 – – 196.9 16.58 x 8 x 2-1⁄2 8.625 x 8.625 x 2.875 – – 7.75 36.4

200 x 200 x 80 ◗ 219.1 x 219.1 x 88.9 – – 196.9 16.68 x 8 x 3 8.625 x 8.625 x 3.500 – – 7.75 36.5

200 x 200 x 100 ◗ 219.1 x 219.1 x 114.1 196.9 16.9 – –8 x 8 x 4 8.625 x 8.625 x 4.500 7.75 37.2 – –

200 x 200 x 125 ◗ 219.1 x 219.1 x 139.7 196.9 17.1 – –– 8.625 x 8.625 x 5.500 7.75 37.7 – –

200 x 200 x 125 ◗ 219.1 x 219.1 x 141.3 – – 196.9 16.78 x 8 x 5 8.625 x 8.625 x 5.563 – – 7.75 36.8

200 x 200 x 150 ◗ 219.1 x 219.1 x 168.3 196.9 17.0 – –8 x 8 x 6 8.625 x 8.625 x 6.625 7.75 37.4 – –

200 x 200 x 150 ◗ 219.1 x 219.1 x 165.1 196.9 17.1 – –– 8.625 x 8.625 x 6.500 7.75 37.7 – –

250 x 250 x 50 ◗ 273.0 x 273.0 x 60.3 – – 228.6 25.910 x 10 x 2 10.750 x 10.750 x 2.375 – – 9.00 57.1

250 x 250 x 80 ◗ 273.0 x 273.0 x 88.9 – – 228.6 26.010 x 10 x 3 10.750 x 10.750 x 3.500 – – 9.00 57.4

250 x 250 x 100 ◗ 273.0 x 273.0 x 114.3 228.6 26.310 x 10 x 4 10.750 x 10.750 x 4.500 9.00 58.0

250 x 250 x 125 ◗ 273.0 x 273.0 x 141.3 – – 228.6 26.210 x 10 x 5 10.750 x 10.750 x 5.563 – – 9.00 57.8

250 x 250 x 150 ◗ 273.0 x 273.0 x 168.3 228.6 27.210 x 10 x 6 10.750 x 10.750 x 6.625 9.00 66.0

250 x 250 x 200 ◗ 273.0 x 273.0 x 219.1 228.6 28.110 x 10 x 8 10.750 x 10.750 x 8.625 9.00 62.0

300 x 300 x 80 ◗ 323.9 x 323.9 x 88.9 – – 254.0 36.412 x 12 x 3 12.750 x 12.750 x 3.500 – – 10.00 80.2

C to E

C to E

C to E

C to E



Groo

veD

Fitt

inGs

GROOvED FiTTiNGS

48 www.grinnell.com


Nominal mm

Inches

O.D.mm

Inches

C to Emm

Inches

Approx. Weight

kgLbs.

C to Emm

Inches

Approx. Weight

kgLbs.

300 x 300 x 100 ◗ 323.9 x 323.9 x 141.3 – – 254.0 36.512 x 12 x 4 12.750 x 12.750 x 4.500 – – 10.00 80.5

300 x 300 x 125 ◗ 323.9 x 323.9 x 114.3 – – 254.0 36.612 x 12 x 5 12.750 x 12.750 x 5.563 – – 10.00 80.7

300 x 300 x 150 ◗ 323.9 x 323.9 x 219.1 – – 254.0 36.712 x 12 x 6 12.750 x 12.750 x 6.625 – – 10.00 80.9

300 x 300 x 200 ◗ 323.9 x 323.9 x 219.1 – – 254.0 34.612 x 12 x 8 12.750 x 12.750 x 8.625 – – 10.00 76.3

300 x 300 x 250 ◗ 323.9 x 323.9 x 273.0 – – 254.0 35.212 x 12 x 10 12.750 x 12.750 x 10.750 – – 10.00 77.6

350 x 350 x 150 355.6 x 355.6 x 168.3 – – 279.4 46.914 x 14 x 6 14.000 x 14.000 x 6.625 – – 11.00 103.3

350 x 350 x 200 355.6 x 355.6 x 219.1 – – 279.4 46.914 x 14 x 8 14.000 x 14.000 x 8.625 – – 11.00 103.4

350 x 350 x 250 355.6 x 355.6 x 273.0 – – 279.4 47.314 x 14 x 10 14.000 x 14.000 x 10.750 – – 11.00 104.3

350 x 350 x 300 355.6 x 355.6 x 323.9 – – 279.4 47.814 x 14 x 12 14.000 x 14.000 x 12.750 – – 11.00 105.3

400 x 400 x 100 406.4 x 406.4 x 114.3 – – 304.8 50.216 x 16 x 4 16.000 x 16.000 x 4.500 – – 12.00 110.7

400 x 400 x 200 406.4 x 406.4 x 219.1 – – 304.8 58.316 x 16 x 8 16.000 x 16.000 x 8.625 – – 12.00 128.5

400 x 400 x 250 406.4 x 406.4 x 273.0 – – 304.8 58.616 x 16 x 10 16.000 x 16.000 x 10.750 – – 12.00 129.3

400 x 400 x 300 406.4 x 406.4 x 323.9 – – 304.8 59.116 x 16 x 12 16.000 x 16.000 x 12.750 – – 12.00 130.2

400 x 400 x 350 406.4 x 406.4 x 355.6 – – 304.8 63.716 x 16 x 14 16.000 x 16.000 x 14.000 – – 12.00 140.4

450 x 450 x 200 457.2 x 457.2 x 219.1 – – 393.7 87.418 x 18 x 8 18.000 x 18.000 x 8.625 – – 15.50 192.7

450 x 450 x 250 457.2 x 457.2 x 273.0 – – 393.7 87.818 x 18 x 10 18.000 x 18.000 x 10.750 – – 15.50 193.6

450 x 450 x 300 457.2 x 457.2 x 323.9 – – 393.7 89.018 x 18 x 12 18.000 x 18.000 x 12.750 – – 15.50 196.3

450 x 450 x 350 457.2 x 457.2 x 355.6 – – 393.7 91.318 x 18 x 14 18.000 x 18.000 x 14.000 – – 15.50 201.3

450 x 450 x 400 457.2 x 457.2 x 406.4 – – 393.7 92.218 x 18 x 16 18.000 x 18.000 x 16.000 – – 15.50 203.2

500 x 500 x 350 508.0 x 508.0 x 355.6 – – 450.9 112.420 x 20 x 14 20.000 x 20.000 x 14.000 – – 17.25 247.9

500 x 500 x 400 508.0 x 508.0 x 406.4 – – 450.9 113.420 x 20 x 16 20.000 x 20.000 x 16.000 – – 17.25 250.1

500 x 500 x 450 508.0 x 508.0 x 457.2 – – 450.9 114.420 x 20 x 18 20.000 x 20.000 x 18.000 – – 17.25 252.2

600 x 600 x 250 609.6 x 609.6 x 273.0 – – 508.0 150.124 x 24 x 10 24.000 x 24.000 x 10.750 – – 20.00 330.9

600 x 600 x 300 609.6 x 609.6 x 323.9 – – 508.0 151.724 x 24 x 12 24.000 x 24.000 x 12.750 – – 20.00 334.5

600 x 600 x 350 609.6 x 609.6 x 355.6 – – 508.0 154.424 x 24 x 14 24.000 x 24.000 x 14.000 – – 20.00 340.3

600 x 600 x 400 609.6 x 609.6 x 406.4 – – 508.0 155.424 x 24 x 16 24.000 x 24.000 x 16.000 – – 20.00 342.6

600 x 600 x 450 609.6 x 609.6 x 457.2 – – 508.0 156.424 x 24 x 18 24.000 x 24.000 x 18.000 – – 20.00 344.7

600 x 600 x 500 609.6 x 609.6 x 508.0 – – 508.0 157.324 x 24 x 20 24.000 x 24.000 x 20.000 – – 20.00 346.8

◗ SizesareavailabletoJISstandards.ContactGRINNELLMechanicalProductsfordetails.Forinformationonlargersizes,contactGRINNELLMechanicalProducts.Seefittingspecificationsonpage35.





C to E

C to E

C to E

C to E

Groo

veD

Fitt

inGs

GROOvED FiTTiNGS


Pipe Size C to GE &C to TE

mm Inches

Approx. Weightkg Lbs.

Nominal mm Inches

O.D.mm Inches

40 x 40 x 32 48.3 x 48.3 x 42.4 82.6 0.81-1⁄2 x 1-1⁄2 x 1-1⁄4 1.900 x 1.900 x 1.660 3.25 1.8

50 x 50 x 25 60.3 x 60.3 x 33.4 82.6 1.02 x 2 x 1 2.375 x 2.375 x 1.315 3.25 2.2

50 x 50 x 32 60.3 x 60.3 x 42.4 82.6 1.02 x 2 x 1-1⁄4 2.375 x 2.375 x 1.660 3.25 2.350 x 50 x 40 60.3 x 60.3 x 48.3 82.6 1.12 x 2 x 1-1⁄2 2.375 x 2.375 x 1.900 3.25 1.465 x 65 x 25 73.0 x 73.0 x 33.4 95.3 1.6

2-1⁄2 x 2-1⁄2 x 1 2.875 x 2.875 x 1.315 3.75 3.665 x 65 x 32 73.0 x 73.0 x 42.4 95.3 1.7

2-1⁄2 x 2-1⁄2 x 1-1⁄4 2.875 x 2.875 x 1.660 3.75 3.865 x 65 x 40 73.0 x 73.0 x 48.3 95.3 1.8

2-1⁄2 x 2-1⁄2 x 1-1⁄2 2.875 x 2.875 x 1.900 3.75 4.065 x 65 x 50 73.0 x 73.0 x 60.3 95.3 1.9

2-1⁄2 x 2-1⁄2 x 2 2.875 x 2.875 x 2.375 3.75 4.280 x 80 x 25 88.9 x 88.9 x 33.4 108.0 2.6

3 x 3 x 1 3.500 x 3.500 x 1.315 4.25 5.780 x 80 x 40 88.9 x 88.9 x 48.3 108.0 2.63 x 3 x 1-1⁄2 3.500 x 3.500 x 1.900 4.25 5.880 x 80 x 50 88.9 x 88.9 x 60.3 108.0 2.7

3 x 3 x 2 3.500 x 3.500 x 2.375 4.25 5.980 x 80 x 65 88.9 x 88.9 x 73.0 108.0 2.93 x 3 x 2-1⁄2 3.500 x 3.500 x 2.875 4.25 6.3

100 x 100 x 25 114.3 x 114.3 x 33.4 95.3 3.14 x 4 x 1 4.500 x 4.500 x 1.315 3.75 6.9

100 x 100 x 32 114.3 x 114.3 x 42.4 95.3 3.44 x 4 x 1-1⁄4 4.500 x 4.500 x 1.660 3.75 7.6

100 x 100 x 40 114.3 x 114.3 x 48.3 127.0 3.84 x 4 x 1-1⁄2 4.500 x 4.500 x 1.900 5.00 8.3

100 x 100 x 50 114.3 x 114.3 x 60.3 127.0 4.44 x 4 x 2 4.500 x 4.500 x 2.375 5.00 9.6

100 x 100 x 65 114.3 x 114.3 x 73.0 127.0 4.54 x 4 x 2-1⁄2 4.500 x 4.500 x 2.875 5.00 10.0

100 x 100 x 80 114.3 x 114.3 x 88.9 127.0 4.74 x 4 x 3 4.500 x 4.500 x 3.500 5.00 10.3

125 x 125 x 50 141.3 x 141.3 x 60.3 139.7 6.45 x 5 x 2 5.563 x 5.563 x 2.375 5.50 14.0

125 x 125 x 65 141.3 x 141.3 x 73.0 139.7 6.55 x 5 x 2-1⁄2 5.563 x 5.563 x 2.875 5.50 14.3

125 x 125 x 80 141.3 x 141.3 x 88.9 139.7 6.65 x 5 x 3 5.563 x 5.563 x 3.500 5.50 14.6

125 x 125 x 100 141.3 x 141.3 x 114.3 139.7 6.85 x 5 x 4 5.563 x 5.563 x 4.500 5.50 15.1

150 x 150 x 50 168.3 x 168.3 x 60.3 165.1 9.76 x 6 x 2 6.625 x 6.625 x 2.375 6.50 21.3

150 x 150 x 65 168.3 x 168.3 x 73.0 165.1 9.86 x 6 x 2-1⁄2 6.625 x 6.625 x 2.875 6.50 21.7

150 x 150 x 80 168.3 x 168.3 x 88.9 165.1 10.06 x 6 x 3 6.625 x 6.625 x 3.500 6.50 22.0

150 x 150 x 100 168.3 x 168.3 x 114.3 165.1 10.26 x 6 x 4 6.625 x 6.625 x 4.500 6.50 22.5

150 x 150 x 125 168.3 x 168.3 x 141.3 165.1 10.56 x 6 x 5 6.625 x 6.625 x 5.563 6.50 23.1

200 x 200 x 50 219.1 x 219.1 x 60.3 196.9 14.88 x 8 x 2 8.625 x 8.625 x 2.375 7.75 32.7

200 x 200 x 80 219.1 x 219.1 x 88.9 196.9 15.28 x 8 x 3 8.625 x 8.625 x 3.500 7.75 33.5

200 x 200 x 100 219.1 x 219.1 x 114.1 196.9 15.68 x 8 x 4 8.625 x 8.625 x 4.500 7.75 34.5

200 x 200 x 125 219.1 x 219.1 x 141.3 196.9 15.78 x 8 x 5 8.625 x 8.625 x 5.563 7.75 34.7

200 x 200 x 150 219.1 x 219.1 x 168.3 196.9 16.18 x 8 x 6 8.625 x 8.625 x 6.625 7.75 35.6

C to E

C to E

Figure 323 Groove x Groove x Male Thread Reducing Tees(Page 1 of 2)


Groo

veD

Fitt

inGs

GROOvED FiTTiNGS

50 www.grinnell.com

Pipe Size C to GE &C to TE

mm Inches

Approx. Weightkg Lbs.

Nominal mm Inches

O.D.mm Inches

250 x 250 x 50 273.0 x 273.0 x 60.3 228.6 23.710 x 10 x 2 10.750 x 10.750 x 2.375 9.00 52.2

250 x 250 x 80 273.0 x 273.0 x 88.9 228.6 24.010 x 10 x 3 10.750 x 10.750 x 3.500 9.00 53.0

250 x 250 x 100 273.0 x 273.0 x 114.3 228.6 24.310 x 10 x 4 10.750 x 10.750 x 4.500 9.00 53.6

250 x 250 x 125 273.0 x 273.0 x 141.3 228.6 24.610 x 10 x 5 10.750 x 10.750 x 5.563 9.00 54.2

250 x 250 x 150 273.0 x 273.0 x 168.3 228.6 24.910 x 10 x 6 10.750 x 10.750 x 6.625 9.00 54.9

250 x 250 x 200 273.0 x 273.0 x 219.1 228.6 25.110 x 10 x 8 10.750 x 10.750 x 8.625 9.00 55.3

300 x 300 x 80 323.9 x 323.9 x 88.9 254.0 33.812 x 12 x 3 12.750 x 12.750 x 3.500 10.00 74.6

300 x 300 x 100 323.9 x 323.9 x 141.3 254.0 34.112 x 12 x 4 12.750 x 12.750 x 4.500 10.00 75.1

300 x 300 x 125 323.9 x 323.9 x 114.3 254.0 34.312 x 12 x 5 12.750 x 12.750 x 5.563 10.00 75.6

300 x 300 x 150 323.9 x 323.9 x 219.1 254.0 34.612 x 12 x 6 12.750 x 12.750 x 6.625 10.00 76.2

300 x 300 x 200 323.9 x 323.9 x 219.1 254.0 34.612 x 12 x 8 12.750 x 12.750 x 8.625 10.00 76.3

300 x 300 x 250 323.9 x 323.9 x 273.0 254.0 35.212 x 12 x 10 12.750 x 12.750 x 10.750 10.00 77.6

350 x 350 x 150 355.6 x 355.6 x 168.3 279.4 46.914 x 14 x 6 14.000 x 14.000 x 6.625 11.00 103.3

350 x 350 x 200 355.6 x 355.6 x 219.1 279.4 46.914 x 14 x 8 14.000 x 14.000 x 8.625 11.00 103.3

350 x 350 x 250 355.6 x 355.6 x 273.0 279.4 47.314 x 14 x 10 14.000 x 14.000 x 10.750 11.00 104.3

350 x 350 x 300 355.6 x 355.6 x 323.9 279.4 47.814 x 14 x 12 14.000 x 14.000 x 12.750 11.00 105.3

400 x 400 x 200 406.4 x 406.4 x 219.1 304.8 58.316 x 16 x 8 16.000 x 16.000 x 8.625 12.00 128.5

400 x 400 x 250 406.4 x 406.4 x 273.0 304.8 58.616 x 16 x 10 16.000 x 16.000 x 10.750 12.00 129.3

400 x 400 x 300 406.4 x 406.4 x 323.9 304.8 59.116 x 16 x 12 16.000 x 16.000 x 12.750 12.00 130.2

450 x 450 x 200 457.2 x 457.2 x 219.1 393.7 87.418 x 18 x 8 18.000 x 18.000 x 8.625 15.50 192.7

450 x 450 x 250 457.2 x 457.2 x 273.0 393.7 87.818 x 18 x 10 18.000 x 18.000 x 10.750 15.50 193.6

450 x 450 x 300 457.2 x 457.2 x 323.9 393.7 89.018 x 18 x 12 18.000 x 18.000 x 12.750 15.50 196.3

450 x 450 x 350 457.2 x 457.2 x 355.6 393.7 91.318 x 18 x 14 18.000 x 18.000 x 14.000 15.50 201.3

450 x 450 x 400 457.2 x 457.2 x 406.4 393.7 92.218 x 18 x 16 18.000 x 18.000 x 16.000 15.50 203.2

500 x 500 x 350 508.0 x 508.0 x 355.6 438.2 112.420 x 20 x 14 20.000 x 20.000 x 14.000 17.25 247.9

500 x 500 x 400 508.0 x 508.0 x 406.4 438.2 113.420 x 20 x 16 20.000 x 20.000 x 16.000 17.25 250.1

500 x 500 x 450 508.0 x 508.0 x 457.2 438.2 114.420 x 20 x 18 20.000 x 20.000 x 18.000 17.25 252.2

600 x 600 x 200 609.6 x 609.6 x 219.1 508.0 148.424 x 24 x 8 24.000 x 24.000 x 8.625 20.00 327.1

600 x 600 x 250 609.6 x 609.6 x 273.0 508.0 150.124 x 24 x 10 24.000 x 24.000 x 10.750 20.00 330.9

600 x 600 x 300 609.6 x 609.6 x 323.9 508.0 151.724 x 24 x 12 24.000 x 24.000 x 12.750 20.00 334.5

AvailablewithBSPthreads.ContactGRINNELLMechanicalProductsfordetails.Forinformationonlargersizes,contactGRINNELLMechanicalProducts.Seefittingspecificationsonpage35.

Figure 323 Groove x Groove x Male Thread Reducing Tees(Page 2 of 2)


C to E

C to E

Groo

veD

Fitt

inGs

GROOvED FiTTiNGS


Figure 250 Concentric Reducer Cast

Figure 350 Concentric Reducer Fabricated


Nominal mm

Inches

O.D.mm

Inches

E to E mm

Inches

Approx. Weight

kgLbs.

E to E mm

Inches

Approx. Weight

kgLbs.

32 x 25 42.4 x 33.4 63.5 0.3 — —1-1⁄4 x 1 1.660 x 1.315 2.50 0.7 — —40 x 25 48.3 x 33.4 63.5 0.3 — —1-1⁄2 x 1 1.900 x 1.315 2.50 0.7 — —40 x 32 48.3 x 42.4 63.5 0.3 — —

1-1⁄2 x 1-1⁄4 1.900 x 1.660 2.50 0.8 — —50 x 25 60.3 x 33.4 63.5 0.4 — —2 x 1 2.375 x 1.315 2.50 0.9 — —

50 x 32 60.3 x 42.4 63.5 0.4 — —2 x 1-1⁄4 2.375 x 1.660 2.50 0.9 — —50 x 40 60.3 x 48.3 63.5 0.5 — —2 x 1-1⁄2 2.375 x 1.900 2.50 1.0 — —65 x 25 73.0 x 33.4 — — 63.5 0.52-1⁄2 x 1 2.875 x 1.315 — — 2.50 1.2

65 x 32 73.0 x 42.4 63.5 0.6 — —2-1⁄2 x 1-1⁄4 2.875 x 1.660 2.50 1.4 — —

65 x 40 73.0 x 48.3 63.5 0.6 — —2-1⁄2 x 1-1⁄2 2.875 x 1.900 2.50 1.4 — —

65 x 50 73.0 x 60.3 63.5 0.6 — —2-1⁄2 x 2 2.875 x 2.375 2.50 1.3 — —65 x 32 76.1 x 42.4 63.5 0.6 — —

– 3.000 x 1.660 2.50 1.4 — —65 x 40 76.1 x 48.3 63.5 0.6 — —

– 3.000 x 1.900 2.50 1.4 — —65 x 50 76.1 x 60.3 63.5 0.7 — —

– 3.000 x 2.375 2.50 1.5 — —80 x 25 88.9 x 33.4 — — 63.5 0.63 x 1 3.500 x 1.315 — — 2.50 1.3

80 x 32 88.9 x 42.4 — — 63.5 0.63 x 1-1⁄4 3.500 x 1.660 — — 2.50 1.380 x 40 88.9 x 48.3 63.5 0.8 — —3 x 1-1⁄2 3.500 x 1.900 2.50 1.8 — —80 x 50 88.9 x 60.3 63.5 0.8 — —3 x 2 3.500 x 2.375 2.50 1.7 — —

80 x 65 88.9 x 73.0 63.5 0.8 — —3 x 2-1⁄2 3.500 x 2.875 2.50 1.7 — —80 x 65 88.9 x 76.1 63.5 0.9 — —

– 3.500 x 3.000 2.50 2.0 — —

E to E

Figure250CastConcentric

Reducer

Figure350FabricatedConcentric

Reducer

E to E

Figures 250 & 350 Concentric Reducers(Page 1 of 4)


Groo

veD

Fitt

inGs

GROOvED FiTTiNGS

52 www.grinnell.com


Nominal mm

Inches

O.D.mm

Inches

E to E mm

Inches

Approx. Weight

kgLbs.

E to E mm

Inches

Approx. Weight

kgLbs.

100 x 25 114.3 x 33.4 — — 98.6 1.14 x 1 4.500 x 1.315 — — 3.88 2.9

100 x 32 114.3 x 42.4 — — 76.2 1.04 x 1-1⁄4 4.500 x 1.660 — — 3.00 2.2100 x 40 114.3 x 48.3 — — 76.2 1.04 x 1-1⁄2 4.500 x 1.900 — — 3.00 2.3100 x 50 114.3 x 60.3 76.2 1.1 — —

4 x 2 4.500 x 2.375 3.00 2.4 — —100 x 65 114.3 x 73.0 76.2 1.2 — —4 x 2-1⁄2 4.500 x 2.875 3.00 2.7 — —100 x 65 114.3 x 76.1 76.2 1.5 — —

– 4.500 x 3.000 3.00 3.2 — —100 x 80 114.3 x 88.9 76.2 1.3 — —

4 x 3 4.500 x 3.500 3.00 2.8 — —125 x 80 139.7 x 88.9 88.9 1.9 — —

– 5.500 x 3.500 3.50 4.2 — —125 x 100 139.7 x 114.3 88.9 2.0 — —

– 5.500 x 4.500 3.50 4.4 — —125 x 50 141.3 x 60.3 — — 88.9 2.1

5 x 2 5.563 x 2.375 — — 3.50 4.6125 x 65 141.3 x 73.0 — — 88.9 2.05 x 2-1⁄2 5.563 x 2.875 — — 3.50 4.5

125 x 80 141.3 x 88.9 88.9 1.9 — —5 x 3 5.563 x 3.500 3.50 4.2 — —

125 x 100 141.3 x 114.3 88.9 2.0 — —5 x 4 5.563 x 4.500 3.50 4.4 — —

150 x 80 165.1 x 88.9 101.6 2.5 — —– 6.500 x 3.500 4.00 5.5 — —

150 x 100 165.1 x 114.3 101.6 2.7 — —– 6.500 x 4.500 4.00 6.0 — —

150 x 125 165.1 x 139.7 101.6 2.5 — —– 6.500 x 5.500 4.00 5.6 — —

150 x 50 168.3 x 60.3 101.6 2.4 — —6 x 2 6.625 x 2.375 4.00 5.3 — —

150 x 65 168.3 x 73.0 101.6 2.6 — —6 x 2-1⁄2 6.625 x 2.875 4.00 5.7 — —150 x 65 168.3 x 76.1 101.6 2.7 — —

– 6.625 x 3.000 4.00 6.1 — —150 x 80 168.3 x 88.9 101.6 2.6 — —

6 x 3 6.625 x 3.500 4.00 5.8 — —

150 x 100 168.3 x 114.3 101.6 2.7 — —6 x 4 6.625 x 4.500 4.00 6.0 — —

150 x 125 168.3 x 139.7 101.6 2.3 — —– 6.625 x 5.500 4.00 6.3 — —

150 x 125 168.3 x 141.3 101.6 2.8 — —6 x 5 6.625 x 5.563 4.00 6.2 — —

200 x 65 ◗ 219.1 x 73.0 — — 127.0 5.58 x 2-1⁄2 8.625 x 2.875 — — 5.00 12.1

200 x 80 ◗ 219.1 x 88.9 127.0 5.2 — —8 x 3 8.625 x 3.500 5.00 11.5 — —

200 x 100 ◗ 219.1 x 114.3 127.0 4.9 — —8 x 4 8.625 x 4.500 5.00 10.7 — —



E to E


Reducer


Reducer

E to E

Groo

veD

Fitt

inGs

GROOvED FiTTiNGS



Nominal mm

Inches

O.D.mm

Inches

E to E mm

Inches

Approx. Weight

kgLbs.

E to E mm

Inches

Approx. Weight

kgLbs.

200 x 125 ◗ 219.1 x 139.7 127.0 4.5 — —– 8.625 x 5.500 5.00 10.0 — —

200 x 125 ◗ 219.1 x 141.3 127.0 4.9 — —8 x 5 8.625 x 5.563 5.00 10.8 — —

200 x 150 ◗ 219.1 x 165.1 127.0 5.0 — —– 8.625 x 6.500 5.00 11.0 — —

200 x 150 ◗ 219.1 x 168.3 127.0 5.1 — —8 x 6 8.625 x 6.625 5.00 11.3 — —

250 x 100 ◗ 273.0 x 114.3 — — 152.4 9.310 x 4 10.750 x 4.500 — — 6.00 20.5

250 x 125 ◗ 273.0 x 141.3 — — 152.4 9.110 x 5 10.750 x 5.563 — — 6.00 20.1

250 x 150 ◗ 273.0 x 165.1 152.4 8.0 — —– 10.750 x 6.500 6.00 17.8 — —

250 x 150 ◗ 273.0 x 168.3 152.4 7.4 — —10 x 6 10.750 x 6.625 6.00 16.3 — —

250 x 200 ◗ 273.0 x 219.1 152.4 8.3 — —10 x 8 10.750 x 8.625 6.00 18.3 — —

300 x 100 ◗ 323.9 x 114.3 177.8 10.3 — —12 x 4 12.750 x 4.500 7.00 22.7 — —

300 x 150 ◗ 323.9 x 168.3 177.8 11.0 — —12 x 6 12.750 x 6.625 7.00 24.2 — —

300 x 200 ◗ 323.9 x 219.1 177.8 11.7 — —12 x 8 12.750 x 8.625 7.00 25.8 — —

300 x 250 ◗ 323.9 x 273.0 177.8 12.8 — —12 x 10 12.750 x 10.750 7.00 28.2 — —

350 x 150 355.6 x 168.3 — — 330.2 24.614 x 6 14.000 x 6.625 — — 13.0 54.3

350 x 200 355.6 x 219.1 — — 330.2 24.714 x 8 14.000 x 8.625 — — 13.0 54.5

350 x 250 355.6 x 273.0 — — 330.2 25.314 x 10 14.000 x 10.750 — — 13.0 55.8

350 x 300 355.6 x 323.9 — — 330.2 26.014 x 12 14.000 x 12.750 — — 13.0 57.3

400 x 200 406.4 x 219.1 — — 355.6 29.716 x 8 16.000 x 8.625 — — 14.0 65.4

400 x 250 406.4 x 273.0 — — 355.6 30.216 x 10 16.000 x 10.750 — — 14.0 66.7

400 x 300 406.4 x 323.9 — — 355.6 30.916 x 12 16.000 x 12.750 — — 14.0 68.1

400 x 350 406.4 x 355.6 — — 355.6 32.216 x 14 16.000 x 14.000 — — 14.0 71.0

450 x 300 457.2 x 323.9 — — 381.0 37.918 x 12 18.000 x 12.750 — — 15.0 83.6

450 x 350 457.2 x 355.6 — — 381.0 39.118 x 14 18.000 x 14.000 — — 15.0 86.2

450 x 400 457.2 x 406.4 — — 381.0 39.618 x 16 18.000 x 16.000 — — 15.0 87.2

500 x 300 508.0 x 323.9 — — 508.0 56.620 x 12 20.000 x 12.750 — — 20.0 124.7

500 x 350 508.0 x 355.6 — — 508.0 58.520 x 14 20.000 x 14.000 — — 20.0 129.0



E to E


Reducer


Reducer

E to E

Groo

veD

Fitt

inGs

GROOvED FiTTiNGS

54 www.grinnell.com


Nominal mm

Inches

O.D.mm

Inches

E to E mm

Inches

Approx. Weight

kgLbs.

E to E mm

Inches

Approx. Weight

kgLbs.

500 x 400 508.0 x 406.4 — — 508.0 59.520 x 16 20.000 x 16.000 — — 20.0 131.1

500 x 450 508.0 x 457.2 — — 508.0 60.520 x 18 20.000 x 18.000 — — 20.0 133.4

600 x 250 609.6 x 273.0 — — 508.0 67.624 x 10 24.000 x 10.750 — — 20.0 149.1

600 x 300 609.6 x 323.9 — — 508.0 68.224 x 12 24.000 x 12.750 — — 20.0 150.4

600 x 350 609.6 x 355.6 — — 508.0 68.824 x 14 24.000 x 14.000 — — 20.0 151.6

600 x 400 609.6 x 406.4 — — 508.0 69.324 x 16 24.000 x 16.000 — — 20.0 152.8

600 x 450 609.6 x 457.2 — — 508.0 69.924 x 18 24.000 x 18.000 — — 20.0 154.1

600 x 500 609.6 x 508.0 — — 508.0 70.524 x 20 24.000 x 20.000 — — 20.0 155.5

◗ SizesareavailabletoJISstandards.ContactGRINNELLMechanicalProductsfordetails.Forinformationonlargersizes,contactGRINNELLMechanicalProducts.Seefittingspecificationsonpage35.



E to E


Reducer


Reducer

E to E

Groo

veD

Fitt

inGs

GROOvED FiTTiNGS



Nominal mm

Inches

O.D.mm

Inches

E to E mm

Inches

Approx. Weight

kgLbs.

E to E mm

Inches

Approx. Weight

kgLbs.

40 x 25 48.3 x 33.4 — — 215.9 0.91-1⁄2 x 1 1.900 x 1.315 — — 8.5 1.9

40 x 32 48.3 x 42.4 — — 215.9 1.01-1⁄2 x 1-1⁄4 1.900 x 1.660 — — 8.5 2.2

50 x 25 60.3 x 33.4 — — 223.6 1.02 x 1 2.375 x 1.315 — — 9.0 2.2

50 x 32 60.3 x 42.4 — — 228.6 1.12 x 1-1⁄4 2.375 x 1.660 — — 9.0 2.4

50 x 40 60.3 x 48.3 — — 228.6 1.12 x 1-1⁄2 2.375 x 1.900 — — 9.0 2.5

65 x 25 73.0 x 33.4 — — 241.3 1.52-1⁄2 x 1 2.875 x 1.315 — — 9.5 3.2

65 x 32 73.0 x 42.4 — — 241.3 1.52-1⁄2 x 1-1⁄4 2.875 x 1.660 — — 9.5 3.4

65 x 40 73.0 x 48.3 — — 241.3 1.62-1⁄2 x 1-1⁄2 2.875 x 1.900 — — 9.5 3.6

65 x 50 73.0 x 60.3 — — 241.3 1.82-1⁄2 x 2 2.875 x 2.375 — — 9.5 4.0

80 x 25 88.9 x 33.4 — — 241.3 1.83 x 1 3.500 x 1.315 — — 9.5 4.0

80 x 32 88.9 x 42.4 — — 241.3 2.03 x 1-1⁄4 3.500 x 1.660 — — 9.5 4.3

80 x 40 88.9 x 48.3 — — 241.3 2.03 x 1-1⁄2 3.500 x 1.900 — — 9.5 4.5

80 x 50 88.9 x 60.3 88.9 0.9 — —3 x 2 3.500 x 2.375 3.5 2.0 — —

80 x 65 88.9 x 73.0 88.9 1.0 — —3 x 2-1⁄2 3.500 x 2.875 3.5 2.2 — —

100 x 25 114.3 x 33.4 — — 254.0 2.74 x 1 4.500 x 1.315 — — 10.0 5.9

100 x 32 114.3 x 42.4 — — 254.0 2.94 x 1-1⁄4 4.500 x 1.660 — — 10.0 6.3

100 x 40 114.3 x 48.3 — — 254.0 2.94 x 1-1⁄2 4.500 x 1.900 — — 10.0 6.4

100 x 50 114.3 x 60.3 101.6 1.4 — —4 x 2 4.500 x 2.375 4.0 3.0 — —

Figure351FabricatedEccentricReducer

(SegmentWelded)

Figure251CastEccentricReducer

Figure 351 Fabricated Eccentric Reducer

(Segment Welded)

Figure 251 Cast Eccentric Reducer

E to E

E to E

Figures 251 & 351 Eccentric Reducers(Page 1 of 3)


Groo

veD

Fitt

inGs

GROOvED FiTTiNGS

56 www.grinnell.com


Nominal mm

Inches

O.D.mm

Inches

E to E mm

Inches

Approx. Weight

kgLbs.

E to E mm

Inches

Approx. Weight

kgLbs.

100 x 65 114.3 x 73.0 101.6 1.4 — —4 x 2-1⁄2 4.500 x 2.875 4.0 3.0 — —

100 x 80 114.3 x 88.9 101.6 1.5 — —4 x 3 4.500 x 3.500 4.0 3.3 — —

125 x 50 141.3 x 60.3 — — 279.4 4.25 x 2 5.563 x 2.375 — — 11.0 9.3

125 x 65 141.3 x 73.0 — — 279.4 4.55 x 2-1⁄2 5.563 x 2.875 — — 11.0 9.9

125 x 80 141.3 x 88.9 — — 279.4 4.95 x 3 5.563 x 3.500 — — 11.0 10.7

125 x 100 141.3 x 114.3 127.5 2.6 — —5 x 4 5.563 x 4.500 5.0 5.7 — —

150 x 80 165.1 x 88.9 — — 292.1 6.2– 6.500 x 3.500 — — 11.5 13.6

150 x 100 165.1 x 114.3 — — 292.1 6.8– 6.500 x 4.500 — — 11.5 14.9

150 x 50 168.3 x 60.3 — — 292.1 5.56 x 2 6.625 x 2.375 — — 11.5 12.2

150 x 65 168.3 x 73.0 — — 292.1 5.86 x 2-1⁄2 6.625 x 2.875 — — 11.50 12.8

150 x 80 168.3 x 88.9 139.7 3.4 — —6 x 3 6.625 x 3.500 5.5 7.4 — —

150 x 100 168.3 x 114.3 139.7 3.4 — —6 x 4 6.625 x 4.500 5.5 7.5 — —

150 x 125 168.3 x 141.3 139.7 3.7 — —6 x 5 6.625 x 5.563 5.5 8.1 — —

200 x 80 219.1 x 88.9 — — 304.8 8.18 x 3 8.625 x 3.500 — — 12.0 17.9

200 x 100 219.1 x 114.3 — — 304.8 9.88 x 4 8.625 x 4.500 — — 12.0 19.7

200 x 125 219.1 x 141.3 — — 304.8 9.78 x 5 8.625 x 5.563 — — 12.0 21.4

200 x 150 219.1 x 168.3 — — 304.8 10.58 x 6 8.625 x 6.625 — — 12.0 23.2

250 x 100 273.0 x 114.3 — — 330.2 13.510 x 4 10.750 x 4.500 — — 13.0 29.7

250 x 125 273.0 x 141.3 — — 330.2 14.410 x 5 10.750 x 5.563 — — 13.0 31.7

250 x 150 273.0 x 168.3 — — 330.2 15.410 x 6 10.750 x 6.625 — — 13.0 34.0

250 x 200 273.0 x 219.1 — — 330.2 15.610 x 8 10.750 x 8.625 — — 13.0 34.4

300 x 100 323.9 x 114.3 — — 355.6 20.312 x 4 12.750 x 4.500 — — 14.0 44.8

300 x 150 323.9 x 168.3 — — 355.6 20.512 x 6 12.750 x 6.625 — — 14.0 45.2

300 x 200 323.9 x 219.1 — — 355.6 21.612 x 8 12.750 x 8.625 — — 14.0 47.7

300 x 250 323.9 x 273.0 — — 355.6 23.612 x 10 12.750 x 10.750 — — 14.0 52.0




(Segment Welded)


E to E

E to E

Groo

veD

Fitt

inGs

GROOvED FiTTiNGS



Nominal mm

Inches

O.D.mm

Inches

E to E mm

Inches

Approx. Weight

kgLbs.

E to E mm

Inches

Approx. Weight

kgLbs.

350 x 150 355.6 x 168.3 — — 482.6 35.414 x 6 14.000 x 6.625 — — 19.0 78.0

350 x 200 355.6 x 219.1 — — 482.6 36.314 x 8 14.000 x 8.625 — — 19.0 80.0

350 x 250 355.6 x 273.0 — — 482.6 38.114 x 10 14.000 x 10.750 — — 19.0 84.0

350 x 300 355.6 x 323.9 — — 482.6 39.914 x 12 14.000 x 12.750 — — 19.0 88.0

400 x 200 406.4 x 219.1 — — 508.0 41.316 x 8 16.000 x 8.625 — — 20.0 91.0

400 x 250 406.4 x 273.0 — — 508.0 43.516 x 10 16.000 x 10.750 — — 20.0 96.0

400 x 300 406.4 x 323.9 — — 508.0 44.916 x 12 16.000 x 12.750 — — 20.0 99.0

400 x 350 406.4 x 355.6 — — 508.0 47.216 x 14 16.000 x 14.000 — — 20.0 104.0

450 x 250 457.2 x 273.1 — — 533.0 49.918 x 10 18.000 x 10.750 — — 21.0 110.0

450 x 300 457.2 x 323.9 — — 533.0 51.318 x 12 18.000 x 12.750 — — 21.0 113.0

450 x 350 457.2 x 355.6 — — 533.0 53.118 x 14 18.000 x 14.000 — — 21.0 117.0

450 x 400 457.2 x 406.4 — — 533.0 54.918 x 16 18.000 x 16.000 — — 21.0 121.0

500 x 250 508.0 x 273.0 — — 660.4 65.820 x 10 20.000 x 10.750 — — 26.0 145.0

500 x 300 508.0 x 323.9 — — 660.4 67.620 x 12 20.000 x 12.750 — — 26.0 149.0

500 x 350 508.0 x 355.6 — — 660.4 68.920 x 14 20.000 x 14.000 — — 26.0 152.0

500 x 400 508.0 x 406.4 — — 660.4 70.820 x 16 20.000 x 16.000 — — 26.0 156.0

500 x 450 508.0 x 457.2 — — 660.4 72.620 x 18 20.000 x 18.000 — — 26.0 160.0

600 x 250 609.6 x 273.0 — — 660.4 78.924 x 10 24.000 x 10.750 — — 26.0 147.0

600 x 300 609.6 x 323.9 — — 660.4 81.224 x 12 24.000 x 12.750 — — 26.0 179.0

600 x 350 609.6 x 355.6 — — 660.4 83.524 x 14 24.000 x 14.000 — — 26.0 184.0

600 x 400 609.6 x 406.4 — — 660.4 85.724 x 16 24.000 x 16.000 — — 26.0 189.0

600 x 450 609.6 x 457.2 — — 660.4 88.024 x 18 24.000 x 18.000 — — 26.0 194.0

600 x 500 609.6 x 508.0 — — 660.4 90.324 x 20 24.000 x 20.000 — — 26.0 199.0





(Segment Welded)


E to E

E to E

Groo

veD

Fitt

inGs

GROOvED FiTTiNGS

58 www.grinnell.com

Pipe SizeE to E mm

Inches

Approx. Weight

kgLbs.

Nominal mm

Inches

O.D.mm

Inches

40 x 25 48.3 x 33.7 63.5 0.31-1⁄2 x 1 1.900 x 1.315 2.50 0.6

50 x 20 63.0 x 26.7 63.5 0.52 x 3⁄4 2.375 x 1.050 2.50 1.0

50 x 25 63.0 x 33.7 63.5 0.42 x 1 2.375 x 1.315 2.50 0.8

50 x 32 63.0 x 42.4 63.5 0.42 x 1-1⁄4 2.375 x 1.660 2.50 0.8

50 x 40 63.0 x 48.3 63.5 0.42 x 1-1⁄2 2.375 x 1.900 2.50 0.8

65 x 32 73.0 x 42.4 63.5 0.52-1⁄2 x 1-1⁄4 2.875 x 1.660 2.50 1.0

65 x 40 73.0 x 48.3 63.5 0.62-1⁄2 x 1-1⁄2 2.875 x 1.900 2.50 1.3

65 x 50 73.0 x 60.3 63.5 0.52-1⁄2 x 2 2.875 x 2.375 2.50 1.2

80 x 25 88.9 x 33.7 63.5 0.63 x 1 3.500 x 1.315 2.50 1.3

80 x 40 88.9 x 48.3 63.5 0.63 x 1-1⁄2 3.500 x 1.900 2.50 1.3

80 x 50 88.9 x 60.3 63.5 0.63 x 2 3.500 x 2.375 2.50 1.3

80 x 65 88.9 x 73.0 63.5 0.73 x 2-1⁄2 3.500 x 2.875 2.50 1.5

90 x 80 101.6 x 88.9 63.5 0.73-1⁄2 x 3 4.000 x 3.500 2.50 1.5

E to E

Pipe SizeE to E mm

Inches

Approx. Weight

kgLbs.

Nominal mm

Inches

O.D.mm

Inches

100 x 25 114.3 x 33.4 76.2 0.8

4 x 1 4.500 x 1.315 3.00 1.8

100 x 40 114.3 x 48.3 76.2 1.04 x 1-1⁄2 4.500 x 1.900 3.00 2.3

100 x 50 114.3 x 60.3 76.2 1.04 x 2 4.500 x 2.375 3.00 2.3

100 x 65 114.3 x 73.0 76.2 1.04 x 2-1⁄2 4.500 x 2.875 3.00 2.3

100 x 80 114.3 x 88.9 76.2 1.24 x 3 4.500 x 3.500 3.00 2.6

125 x 100 141.3 x 114.3 88.9 2.05 x 4 5.563 x 4.500 3.50 4.5

150 x 25 168.3 x 33.4 101.6 2.46 x 1 6.625 x 1.315 4.00 5.2

150 x 50 168.3 x 60.3 101.6 2.76 x 2 6.625 x 2.375 4.00 6.0

150 x 80 168.3 x 88.9 101.6 2.76 x 3 6.625 x 3.500 4.00 6.0

150 x 100 168.3 x 114.3 101.6 2.76 x 4 6.625 x 4.500 4.00 5.9

150 x 125 168.3 x 141.3 101.6 2.66 x 5 6.625 x 5.563 4.00 5.8

AvailablewithBSPthreads.ContactGRINNELLMechanicalProductsfordetails.



Figure 372 Reducers, Small End Threaded (Male)Tech Data Sheet: G180

Groo

veD

Fitt

inGs

GROOvED FiTTiNGS


Pipe SizeE to E mm

Inches

Approx. Weight kg

Lbs.

Nominal mm

Inches

O.D.mm

Inches 25 33.4 82.6 0.21 1.315 3.25 0.432 42.4 92.1 0.3

1-1⁄4 1.600 3.63 0.740 48.3 101.6 0.4

1-1⁄2 1.900 4.00 0.850 60.3 117.5 0.62 2.375 4.63 1.365 73.0 139.7 1.0

2-1⁄2 2.875 5.50 2.180 88.9 152.4 1.53 3.500 6.00 3.3

100 114.3 184.2 2.54 4.500 7.25 5.5

125 141.3 247.7 3.75 5.563 9.75 8.1

150 168.3 279.4 6.06 6.625 11.00 13.2

200 219.1 317.5 10.98 8.625 12.50 24.0

250 273.0 355.6 13.210 10.750 14.00 29.0300 323.9 406.4 20.912 12.750 16.00 46.0


E to E

Pipe SizeE to E mm

Inches

Approx. Weight kg

Lbs.

Nominal mm

Inches

O.D.mm

Inches 25 33.4 52.4 0.31 1.315 2.063 0.732 42.4 58.7 0.6

1-1⁄4 1.600 2.312 1.440 48.3 58.7 0.7

1-1⁄2 1.900 2.312 1.550 60.3 63.5 0.72 2.375 2.500 1.665 73.0 63.5 0.9

2-1⁄2 2.875 2.500 1.965 76.1 63.5 0.9– 3.000 2.500 1.980 88.9 69.9 1.13 3.500 2.750 2.5

100 114.3 82.5 2.04 4.500 3.250 4.5

AvailablewithBSPthreads.ContactGRINNELLMechanicalProductsfordetails.Forinformationonlargersizes,contactGRINNELLMechanicalProducts.Seefittingspecificationsonpage35.

E to E

Figure 395 Hose Adapter Nipples, Groove x HoseTech Data Sheet: G180

Figure 380 Female Thread Adapters Groove x Female Thread


Groo

veD

Fitt

inGs

GROOvED FiTTiNGS

60 www.grinnell.com

Figure 391 Fabricated Adapter Nipple

Groove x Male Thread


Groove x Groove


Groove x Plain

Pipe SizeE to E mm

Inches

Approx. Weight kg

Lbs.

Nominal mm

Inches

O.D.mm

Inches

32 42.4 101.6 0.41-1⁄4 1.600 4.00 0.8

40 48.3 101.6 0.41-1⁄2 1.900 4.00 0.9

50 60.3 101.6 0.52 2.375 4.00 1.2

65 73.0 101.6 0.92-1⁄2 2.875 4.00 1.9

80 88.9 101.6 1.13 3.500 4.00 2.5

100 114.3 154.4 2.44 4.500 6.00 5.4

125 141.3 154.4 3.35 5.563 6.00 7.3

150 168.3 154.4 4.36 6.625 6.00 9.4

200 219.1 154.4 6.48 8.625 6.00 14.2

250 273.0 203.2 12.210 10.750 8.00 27.0

300 323.9 203.2 15.012 12.750 8.00 33.0

Forinformationonlargersizes,contactGRINNELLMechanicalProducts.


E to E

E to E

E to E

Figures 391, 392 & 393 Adapter NipplesTech Data Sheet: G180

Groo

veD

Fitt

inGs

GROOvED FiTTiNGS


Pipe SizeE to Emm

Inches

Approx. Weight

kgLbs.

Nominal mm

Inches

O.D.mm

Inches 50 x 25 60.3 x 33.4 165.1 0.92 x 1 2.375 x 1.315 6.50 2.0

50 x 32 60.3 x 42.4 165.1 0.92 x 1-1⁄4 2.375 x 1.660 6.50 2.050 x 40 60.3 x 48.3 165.1 0.92 x 1-1⁄2 2.375 x 1.900 6.50 2.065 x 25 73.0 x 33.4 177.8 1.62-1⁄2 x 1 2.875 x 1.315 7.00 3.565 x 32 73.0 x 42.4 177.8 1.6

2-1⁄2 x 1-1⁄4 2.875 x 1.660 7.00 3.565 x 40 73.0 x 48.3 177.8 1.6

2-1⁄2 x 1-1⁄2 2.875 x 1.900 7.00 3.565 x 50 73.0 x 60.3 177.8 1.62-1⁄2 x 2 2.875 x 2.375 7.00 3.580 x 25 88.9 x 33.4 203.2 2.33 x 1 3.500 x 1.315 8.00 5.0

80 x 32 88.9 x 42.4 203.2 2.33 x 1-1⁄4 3.500 x 1.600 8.00 5.080 x 40 88.9 x 48.3 203.2 2.33 x 1-1⁄2 3.500 x 1.900 8.00 5.080 x 50 88.9 x 60.3 203.2 2.33 x 2 3.500 x 2.375 8.00 5.0

80 x 65 88.9 x 73.0 203.2 2.33 x 2-1⁄2 3.500 x 2.875 8.00 5.0100 x 25 114.3 x 33.4 228.6 3.6

4 x 1 4.500 x 1.315 9.00 8.0100 x 32 114.3 x 42.4 228.6 3.64 x 1-1⁄4 4.500 x 1.660 9.00 8.0100 x 40 114.3 x 48.3 228.6 3.64 x 1-1⁄2 4.500 x 1.900 9.00 8.0100 x 50 114.3 x 60.3 228.6 3.6

4 x 2 4.500 x 2.375 9.00 8.0100 x 65 114.3 x 73.0 228.6 3.64 x 2-1⁄2 4.500 x 2.875 9.00 8.0

E to E E to EE to E

Pipe SizeE to Emm

Inches

Approx. Weight

kgLbs.

Nominal mm

Inches

O.D.mm

Inches 100 x 80 114.3 x 88.9 228.6 3.6

4 x 3 4.500 x 3.500 9.00 8.0125 x 50 141.3 x 60.3 279.4 5.4

5 x 2 5.563 x 2.375 11.00 12.0125 x 65 141.3 x 73.0 279.4 5.45 x 2-1⁄2 5.563 x 2.875 11.00 12.0125 x 80 141.3 x 88.9 279.4 5.4

5 x 3 5.563 x 3.500 11.00 12.0125 x 100 141.3 x 114.3 279.4 5.4

5 x 4 5.563 x 4.500 11.00 12.0150 x 25 168.3 x 33.4 304.8 8.6

6 x 1 6.625 x 1.315 12.00 19.0150 x 32 168.3 x 42.4 304.8 8.66 x 1-1⁄4 6.625 x 1.660 12.00 19.0150 x 40 168.3 x 48.3 304.8 8.66 x 1-1⁄2 6.625 x 21.900 12.00 19.0150 x 50 168.3 x 60.3 304.8 8.6

6 x 2 6.625 x 2.375 12.00 19.0150 x 65 168.3 x 73.0 304.8 8.66 x 2-1⁄2 6.625 x 2.875 12.00 19.0150 x 80 168.3 x 88.9 304.8 8.6

6 x 3 6.625 x 3.500 12.00 19.0150 x 100 168.3 x 114.3 304.8 8.6

6 x 4 6.625 x 4.500 12.00 19.0150 x 125 168.3 x 141.3 304.8 8.6

6 x 5 6.625 x 5.563 12.00 19.0200 x 150 219.1 x 168.3 ◆ ◆

8 x 6 8.625 x 6.625 - -

◆Thesesizesareavailable.ContactGRINNELLMechanicalProductsfordetails.



Figures 397, 398 & 399 Swaged NipplesTech Data Sheet: G180

Figure 397 Fabricated Swaged Nipple

Groove x Groove


Groove x Male Thread


Groove x Plain End

Groo

veD

Fitt

inGs

GROOvED FiTTiNGS

62 www.grinnell.com

Pipe SizeC to LE

mmInches

C to SEmm

Inches

Approx. Weight

kgLbs.

Nominal mm

Inches

O.D.mm

Inches

32 42.4 69.9 63.5 0.61-1⁄4 1.660 2.75 2.50 1.4

40 48.3 69.9 69.9 0.81-1⁄2 1.900 2.75 2.75 1.7

50 60.3 82.6 69.9 1.12 2.375 3.25 2.75 2.5

65 73.0 95.3 76.2 2.02-1⁄2 2.875 3.75 3.00 4.4

65 76.1 95.3 76.2 2.0– 3.000 3.75 3.00 4.4

80 88.9 108.0 82.6 2.93 3.500 4.25 3.25 6.4

100 114.3 127.0 95.3 4.84 4.500 5.00 3.75 10.5

125 141.3 139.7 101.6 6.95 5.563 5.50 4.00 15.2

150 165.1 165.1 114.3 10.4– 6.500 6.50 4.50 22.9

150 168.3 165.1 114.3 10.46 6.625 6.50 4.50 22.9

200 219.1 196.9 152.4 19.08 8.625 7.75 6.00 41.9

250 273.0 228.6 165.71 30.010 10.750 9.00 6.50 66.2

300 323.9 254.0 177.8 39.812 12.750 10.00 7.00 87.7

350 355.6 279.4 190.5 47.814 14.000 11.00 7.50 105.3

400 406.4 304.8 203.2 58.616 16.000 12.00 8.00 129.1

450 457.2 393.7 215.9 83.618 18.000 15.50 8.50 184.4

500 508.0 438.2 238.6 102.420 20.000 17.25 9.00 225.8

600 609.6 508.0 254.0 139.924 24.000 20.00 10.00 308.5



C to SE

C to LE

Figure 324 90° True WyesTech Data Sheet: G180

Groo

veD

Fitt

inGs

GROOvED FiTTiNGS


Pipe SizeC to LE

mmInches

C to SEmm

Inches

Approx. Weight

kgLbs.

Nominal mm

Inches

O.D.mm

Inches

32 42.4 146.0 63.5 1.11-1⁄4 1.660 5.75 2.50 2.4

40 48.3 158.8 69.9 1.41-1⁄2 1.900 6.25 2.75 3.1

50 60.3 177.8 69.9 2.02 2.375 7.00 2.75 4.5

65 73.0 196.9 76.2 3.52-1⁄2 2.875 7.75 3.00 7.7

65 76.1 196.9 76.2 3.5– 3.000 7.75 3.00 7.7

80 88.9 215.9 82.6 5.03 3.500 8.50 3.25 11.0

100 114.3 266.7 95.3 8.54 4.500 10.50 3.75 18.7

125 141.3 317.5 101.6 13.35 5.563 12.50 4.00 29.4

150 165.1 355.6 114.3 19.1– 6.500 14.00 4.50 42.2

150 168.3 355.6 114.3 19.16 6.625 14.00 4.50 42.2

200 219.1 457.2 152.4 32.28 8.625 18.00 6.00 70.9

250 273.0 520.7 165.71 49.310 10.750 20.50 6.50 108.6

300 323.9 584.2 177.8 69.112 12.750 23.00 7.00 152.4

350 355.6 673.1 190.5 99.414 14.000 26.50 7.50 219.1

400 406.4 736.6 203.2 122.716 16.000 29.00 8.00 270.6

450 457.2 812.8 215.9 151.018 18.000 32.00 8.50 333.0

500 508.0 889.0 238.6 182.220 20.000 35.00 9.00 401.7

600 609.6 1016.0 254.0 237.724 24.000 40.00 10.00 524.1



C to LE

C to SEC to LE

Figure 314 45° LateralsTech Data Sheet: G180

Groo

veD

Fitt

inGs

GROOvED FiTTiNGS

64 www.grinnell.com

Pipe SizeC to LE

mmInches

C to SEmm

Inches

Approx.Weight

kgLbs.

Nominal mm

Inches

O.D.mm

Inches

80 x 80 x 50 88.9 x 88.9 x 60.3 215.9 82.6 4.13 x 3 x 2 3.500 x 3.500 x 2.375 8.50 3.25 9.0

80 x 80 x 65 88.9 x 88.9 x 73.0 215.9 82.6 4.53 x 3 x 2-1⁄2 3.500 x 3.500 x 2.875 8.50 3.25 10.0

100 x 100 x 50 114.3 x 114.3 x 60.3 266.7 95.3 6.74 x 4 x 2 4.500 x 4.500 x 2.375 10.50 3.75 14.7

100 x 100 x 65 114.3 x 114.3 x 73.0 266.7 95.3 7.34 x 4 x 2-1⁄2 4.500 x 4.500 x 2.875 10.50 3.75 16.0

100 x 100 x 80 114.3 x 114.3 x 88.9 266.7 95.3 7.74 x 4 x 3 4.500 x 4.500 x 3.500 10.50 3.75 16.9

125 x 125 x 50 141.3 x 141.3 x 60.3 317.5 101.6 10.25 x 5 x 2 5.563 x 5.563 x 2.375 12.50 4.00 22.4

125 x 125 x 80 141.3 x 141.3 x 88.9 317.5 101.6 11.35 x 5 x 3 5.563 x 5.563 x 3.500 12.50 4.00 24.9

125 x 125 x 100 141.3 x 141.3 x 114.3 317.5 101.6 12.25 x 5 x 4 5.563 x 5.563 x 4.500 12.50 4.00 26.9

150 x 150 x 50 168.3 x 168.3 x 60.3 355.6 114.3 14.46 x 6 x 2 6.625 x 6.625 x 2.375 14.00 4.50 31.7

150 x 150 x 80 168.3 x 168.3 x 88.9 355.6 114.3 15.66 x 6 x 3 6.625 x 6.625 x 3.500 14.00 4.50 34.4

150 x 150 x 100 168.3 x 168.3 x 114.3 355.6 114.3 16.66 x 6 x 4 6.625 x 6.625 x 4.500 14.00 4.50 36.5

150 x 150 x 125 168.3 x 168.3 x 141.3 355.6 114.3 17.76 x 6 x 5 6.625 x 6.625 x 5.563 14.00 4.50 39.1

200 x 200 x 100 219.1 x 219.1 x 114.1 457.2 152.4 26.78 x 8 x 4 8.625 x 8.625 x 4.500 18.00 6.00 58.9

200 x 200 x 125 219.1 x 219.1 x 141.3 457.2 152.4 28.28 x 8 x 5 8.625 x 8.625 x 5.563 18.00 6.00 62.2

200 x 200 x 150 219.1 x 219.1 x 168.3 457.2 152.4 30.08 x 8 x 6 8.625 x 8.625 x 6.625 18.00 6.00 66.1

250 x 250 x 100 273.0 x 273.0 x 114.3 520.7 165.1 39.610 x 10 x 4 10.750 x 10.750 x 4.500 20.50 6.50 87.3

250 x 250 x 125 273.0 x 273.0 x 141.3 520.7 165.1 41.110 x 10 x 5 10.750 x 10.750 x 5.563 20.50 6.50 90.7

250 x 250 x 150 273.0 x 273.0 x 168.3 520.7 165.1 43.010 x 10 x 6 10.750 x 10.750 x 6.625 20.50 6.50 94.7

250 x 250 x 200 273.0 x 273.0 x 219.1 520.7 165.1 45.010 x 10 x 8 10.750 x 10.750 x 8.625 20.50 6.50 99.2

300 x 300 x 100 323.9 x 323.9 x 114.3 584.2 177.8 54.712 x 12 x 4 12.750 x 12.750 x 4.500 23.00 7.00 120.6

300 x 300 x 150 323.9 x 323.9 x 168.3 584.2 177.8 58.312 x 12 x 6 12.750 x 12.750 x 6.625 23.00 7.00 128.5

300 x 300 x 200 323.9 x 323.9 x 219.1 584.2 177.8 60.412 x 12 x 8 12.750 x 12.750 x 8.625 23.00 7.00 133.1

C to SE

C to LE

C to LE

Figure 325 45° Reducing Laterals(Page 1 of 2)


Groo

veD

Fitt

inGs

GROOvED FiTTiNGS


C to SE

C to LE

C to LE

Pipe SizeC to LE

mmInches

C to SEmm

Inches

Approx.Weight

kgLbs.

Nominal mm

Inches

O.D.mm

Inches

300 x 300 x 250 323.9 x 323.9 x 273.0 584.2 177.8 64.512 x 12 x 10 12.750 x 12.750 x 10.750 23.00 7.00 142.3

350 x 350 x 100 355.6 x 355.6 x 114.3 673.1 190.5 76.214 x 14 x 4 14.000 x 14.000 x 4.500 26.50 7.50 167.9

350 x 350 x 150 355.6 x 355.6 x 168.3 673.1 190.5 80.414 x 14 x 6 14.000 x 14.000 x 6.625 26.50 7.50 177.2

350 x 350 x 200 355.6 x 355.6 x 219.1 673.1 190.5 82.814 x 14 x 8 14.000 x 14.000 x 8.625 26.50 7.50 182.5

350 x 350 x 250 355.6 x 355.6 x 273.0 673.1 190.5 87.514 x 14 x 10 14.000 x 14.000 x 10.750 26.50 7.50 193.0

350 x 350 x 300 355.6 x 355.6 x 323.9 673.1 190.5 92.414 x 14 x 12 14.000 x 14.000 x 12.750 26.50 7.50 203.8

400 x 400 x 150 406.4 x 406.4 x 168.3 736.6 203.0 98.516 x 16 x 6 16.000 x 16.000 x 6.625 29.00 8.00 217.2

400 x 400 x 200 406.4 x 406.4 x 219.1 736.6 203.0 101.216 x 16 x 8 16.000 x 16.000 x 8.625 29.00 8.00 223.0

400 x 400 x 250 406.4 x 406.4 x 273.0 736.6 203.0 106.216 x 16 x 10 16.000 x 16.000 x 10.750 29.00 8.00 234.1

400 x 400 x 300 406.4 x 406.4 x 323.9 736.6 203.0 111.316 x 16 x 12 16.000 x 16.000 x 12.750 29.00 8.00 245.4

400 x 400 x 350 406.4 x 406.4 x 355.6 736.6 203.0 118.416 x 16 x 14 16.000 x 16.000 x 14.000 29.00 8.00 261.0

450 x 450 x 150 457.2 x 457.2 x 168.3 812.8 215.9 120.218 x 18 x 6 18.000 x 18.000 x 6.625 32.00 8.50 265.1

450 x 450 x 200 457.2 x 457.2 x 219.1 812.8 215.9 123.218 x 18 x 8 18.000 x 18.000 x 8.625 32.00 8.50 271.5

450 x 450 x 250 457.2 x 457.2 x 273.0 812.8 215.9 128.718 x 18 x 10 18.000 x 18.000 x 10.750 32.00 8.50 283.7

450 x 450 x 300 457.2 x 457.2 x 323.9 812.8 215.9 134.318 x 18 x 12 18.000 x 18.000 x 12.750 32.00 8.50 296.0

450 x 450 x 350 457.2 x 457.2 x 355.6 812.8 215.9 141.818 x 18 x 14 18.000 x 18.000 x 14.000 32.00 8.50 312.6

450 x 450 x 400 457.2 x 457.2 x 406.4 812.8 215.9 146.318 x 18 x 16 18.000 x 18.000 x 16.000 32.00 8.50 322.6

500 x 500 x 300 508.0 x 508.0 x 323.9 889.0 228.6 159.420 x 20 x 12 20.000 x 20.000 x 12.750 35.00 9.00 351.4

500 x 500 x 350 508.0 x 508.0 x 355.6 889.0 228.6 167.420 x 20 x 14 20.000 x 20.000 x 14.000 35.00 9.00 369.1

500 x 500 x 400 508.0 x 508.0 x 406.4 889.0 228.6 172.220 x 20 x 16 20.000 x 20.000 x 16.000 35.00 9.00 379.7

600 x 600 x 400 609.6 x 609.6 x 406.4 1016.0 254.0 224.824 x 24 x 16 24.000 x 24.000 x 16.000 40.00 10.00 495.6

600 x 600 x 500 609.6 x 609.6 x 508.0 1016.0 254.0 235.124 x 24 x 20 24.000 x 24.000 x 20.000 40.00 10.00 518.4


Figure 325 45° Reducing Laterals(Page 2 of 2)


Groo

veD

Fitt

inGs

GROOvED FiTTiNGS

66 www.grinnell.com

Pipe SizeG

mmInches

H mm

Inches

E1 mm

Inches

E2 mm

Inches

Approx Wt. kg

Lbs.

Nominal mm

Inches

O.D.mm

Inches

50 x 50 x 50 60.3 x 60.3 x 60.3 69.9 177.8 228.6 187.2 2.62 x 2 x 2 2.375 x 2.375 x 2.375 2.75 7.00 9.00 7.37 5.7

65 x 65 x 65 73.0 x 73.0 x 73.0 76.2 196.9 266.7 224.5 4.62-1⁄2 x 2-1⁄2 x 2-1⁄2 2.875 x 2.875 x 2.875 3.00 7.75 10.50 8.84 10.2

80 x 80 x 80 88.9 x 88.9 x 88.9 82.6 215.9 292.1 236.5 6.53 x 3 x 3 3.500 x 3.500 x 3.500 3.25 8.50 11.50 9.31 14.4

100 x 100 x 80 114.3 x 114.3 x 88.9 95.3 266.7 327.2 258.3 9.34 x 4 x 3 4.500 x 4.500 x 3.500 3.75 10.50 12.88 10.17 20.5

100 x 100 x 100 141.3 x 114.3 x 114.3 95.3 266.7 346.2 301.5 11.24 x 4 x 4 4.500 x 4.500 x 4.500 3.75 10.50 13.63 11.87 24.6

125 x 125 x 80 141.3 x 141.3 x 88.9 101.6 317.5 362.0 336.6 12.95 x 5 x 3 5.563 x 5.563 x 3.500 4.00 12.50 14.25 13.25 28.4

125 x 125 x 100 141.3 x 141.3 x 114.3 101.6 317.5 384.3 345.7 14.95 x 5 x 4 5.563 x 5.563 x 4.500 4.00 12.50 15.13 13.61 32.8

125 x 125 x D125 141.3 x 141.3 x 141.3 101.6 317.5 409.7 355.6 17.65 x 5 x 5 5.563 x 5.563 x 5.563 4.00 12.50 16.13 14.00 38.8

150 x 150 x 80 168.3 x 168.3 x 88.9 114.3 355.6 388.9 376.2 17.26 x 6 x 3 6.625 x 6.625 x 3.500 4.50 14.00 15.31 14.81 37.9

150 x 150 x 100 168.3 x 168.3 x 114.3 114.3 355.6 412.8 387.4 19.36 x 6 x 4 6.625 x 6.625 x 4.500 4.50 14.00 16.25 15.25 42.5

150 x 150 x 125 168.3 x 168.3 x 141.3 114.3 355.6 438.2 396.7 22.06 x 6 x 5 6.625 x 6.625 x 5.563 4.50 14.00 17.25 15.62 48.5

150 x 150 x 150 168.3 x 168.3 x 168.3 114.3 355.6 463.6 406.4 25.56 x 6 x 6 6.625 x 6.625 x 6.625 4.50 14.00 18.25 16.00 56.3

200 x 200 x 80 219.1 x 219.1 x 88.9 152.4 457.2 462.0 487.2 30.58 x 8 x 3 8.625 x 8.625 x 3.500 6.00 18.00 18.19 19.18 67.3

200 x 200 x 100 219.1 x 219.1 x 114.3 152.4 457.2 482.6 495.3 32.88 x 8 x 4 8.625 x 8.625 x 4.500 6.00 18.00 19.00 19.50 72.3

200 x 200 x 125 219.1 x 219.1 x 141.3 152.4 457.2 508.0 504.7 35.78 x 8 x 5 8.625 x 8.625 x 5.563 6.00 18.00 20.00 19.87 78.8

E1

E2H

G

E1

E2H

G

Figure 330 Tee Wyes(Page 1 of 2)


Groo

veD

Fitt

inGs

GROOvED FiTTiNGS


E1

E2H

G

E1

E2H

G

Pipe SizeG

mmInches

H mm

Inches

E1 mm

Inches

E2 mm

Inches

Approx Wt. kg

Lbs.

Nominal mm

Inches

O.D.mm

Inches

200 x 200 x 150 219.1 x 219.1 x 168.3 152.4 457.2 536.7 517.4 39.68 x 8 x 6 8.625 x 8.625 x 6.625 6.00 18.00 21.13 20.37 87.4

200 x 200 x 200 219.1 x 219.1 x 219.1 152.4 457.2 590.6 539.8 49.48 x 8 x 8 8.625 x 8.625 x 8.625 6.00 18.00 23.25 21.25 109.0

250 x 250 x 80 273.0 x 273.0 x 88.9 165.1 520.7 505.0 543.1 46.110 x 10 x 3 10.750 x 10.750 x 3.500 6.50 20.50 19.88 21.38 101.7

250 x 250 x 100 273.0 x 273.0 x 114.3 165.1 520.7 527.1 552.5 48.510 x 10 x 4 10.750 x 10.750 x 4.500 6.50 20.50 20.75 21.75 106.9

250 x 250 x 125 273.0 x 273.0 x 141.3 165.1 520.7 555.8 565.2 51.610 x 10 x 5 10.750 x 10.750 x 5.563 6.50 20.50 21.88 22.25 113.8

250 x 250 x 150 273.0 x 273.0 x 168.3 165.1 520.7 581.2 574.6 55.410 x 10 x 6 10.750 x 10.750 x 6.625 6.50 20.50 22.88 22.62 122.1

250 x 250 x 200 273.0 x 273.0 x 219.1 165.1 520.7 692.2 603.3 68.510 x 10 x 8 10.750 x 10.750 x 8.625 6.50 20.50 27.25 23.75 151.1

250 x 250 x 250 273.0 x 273.0 x 273.0 165.1 520.7 692.2 620.0 79.410 x 10 x 10 10.750 x 10.750 x 10.750 6.50 20.50 27.25 24.41 175.1

300 x 300 x 80 323.9 x 323.9 x 88.9 177.8 584.2 527.1 577.9 61.012 x 12 x 3 12.750 x 12.750 x 3.500 7.00 23.00 20.75 22.75 134.5

300 x 300 x 100 323.9 x 323.9 x 114.3 177.8 584.2 546.1 584.2 63.212 x 12 x 4 12.750 x 12.750 x 4.500 7.00 23.00 21.50 23.00 139.4

300 x 300 x 150 323.9 x 323.9 x 168.3 177.8 584.2 603.3 609.6 70.012 x 12 x 6 12.750 x 12.750 x 6.625 7.00 23.00 23.75 24.00 154.5

300 x 300 x 200 323.9 x 323.9 x 219.1 177.8 584.2 660.4 635.0 79.712 x 12 x 8 12.750 x 12.750 x 8.625 7.00 23.00 26.00 25.00 175.8

300 x 300 x 250 323.9 x 323.9 x 273.0 177.8 584.2 711.2 654.1 93.212 x 12 x 10 12.750 x 12.750 x 10.750 7.00 23.00 28.00 25.75 205.4

300 x 300 x 300 323.9 x 323.9 x 323.9 177.8 584.2 787.4 698.5 108.912 x 12 x 12 12.750 x 12.750 x 12.750 7.00 23.00 31.00 27.50 240.1


Figure 330 Tee Wyes(Page 2 of 2)


Groo

veD

Fitt

inGs

GROOvED FiTTiNGS

68 www.grinnell.com

Pipe SizeG

mmInches

H mm

Inches

E1 mm

Inches

E2 mm

Inches

Approx Wt. kg

Lbs.

Nominal mm

Inches

O.D.mm

Inches

100 x 80 x 80 114.3 x 88.9 x 88.9 228.9 187.5 273.1 184.2 6.24 x 3 x 3 4.500 x 3.500 x 3.500 9.01 7.38 10.75 7.25 13.7

100 x 80 x 100 114.3 x 88.9 x 114.3 362.0 266.7 346.2 301.5 11.14 x 3 x 4 4.500 x 3.500 x 4.500 14.25 10.50 13.63 11.87 24.5

125 x 80 x 80 141.3 x 88.9 x 88.9 279.5 247.7 292.1 195.8 8.65 x 3 x 3 5.563 x 3.500 x 3.500 11.00 9.75 11.50 7.71 19.0

125 x 80 x 100 141.3 x 88.9 x 141.3 419.1 317.5 409.7 354.3 17.55 x 3 x 5 5.563 x 3.500 x 5.563 16.50 12.50 16.13 13.95 38.5

125 x 100 x 80 141.3 x 114.3 x 88.9 279.7 231.9 301.88 221.2 8.85 x 4 x 3 5.563 x 4.500 x 3.500 11.01 9.13 11.88 8.71 19.5

125 x 100 x 100 141.3 x 114.3 x 114.3 279.7 231.9 323.9 228.6 10.55 x 4 x 4 5.563 x 4.500 x 4.500 11.01 9.13 12.75 9.00 23.1

150 x 100 x 150 168.3 x 114.3 x 168.3 469.9 355.6 463.6 350.0 25.56 x 4 x 6 6.625 x 4.500 x 6.625 18.50 14.00 18.25 13.78 56.2

150 x 125 x 80 168.3 x 141.3 x 88.9 304.9 273.1 330.2 235.0 11.66 x 5 x 3 6.625 x 5.563 x 3.500 12.00 10.75 13.00 9.25 25.6

150 x 125 x 100 168.3 x 141.3 x 114.3 304.9 273.1 352.6 244.3 13.36 x 5 x 4 6.625 x 5.563 x 4.500 12.00 10.75 13.88 9.62 29.3

200 x 150 x 100 219.1 x 168.3 x 114.1 330.2 304.8 374.7 260.3 18.28 x 6 x 4 8.625 x 6.625 x 4.500 13.00 12.00 14.75 10.25 40.2

200 x 150 x 200 219.1 x 168.3 x 219.1 609.6 457.2 590.6 539.8 49.38 x 6 x 8 8.625 x 6.625 x 8.625 24.00 18.00 23.25 21.25 108.6


E1

G

H

E2

Figure 331 Reducing Tee WyesTech Data Sheet: G180

Groo

veD

Fitt

inGs

GROOvED FiTTiNGS



Nominal mm

Inches

O.D.mm

Inches

C to Emm

Inches

ApproxWeight

KgLbs.

C to Emm

Inches

ApproxWeight

KgLbs.

32 42.4 69.9 1.0 – –1-1⁄4 1.660 2.75 2.2 – –

40 48.3 69.9 1.1 – –1-1⁄2 1.900 2.75 2.5 – –

50 60.3 82.6 1.7 – –2 2.375 3.25 3.7 – –

65 73.0 95.3 2.6 – –2-1⁄2 2.875 3.75 5.8 – –

65 76.1 95.3 2.7 – –– 3.000 3.75 6.0 – –

80 88.9 108.0 3.9 – –3 3.500 4.25 8.6 – –

100 114.3 127.0 9.4 – –4 4.500 5.00 20.7 – –

125 141.3 139.7 8.4 – –5 5.563 5.50 18.5 – –

150 165.1 165.1 12.4 – –– 6.500 6.50 27.3 – –

150 168.3 165.1 13.0 – –6 6.625 6.50 28.6 – –

200 219.1 196.9 21.7 – –8 8.625 7.75 48.0 – –

250 273.0 228.6 34.0 – –10 10.750 9.00 75.0 – –

300 323.9 254.0 43.4 – –12 12.750 10.00 95.8 – –

350 355.6 – – 279.4 62.014 14.000 – – 11.00 136.8

400 406.4 – – 304.8 75.916 16.000 – – 12.00 167.3

450 457.2 – – 393.7 117.718 18.000 – – 15.50 259.5

500 508.0 – – 438.2 145.920 20.000 – – 17.25 321.7

600 609.6 – – 508.0 200.824 24.000 – – 20.00 442.7


Seefittingspecificationsonpage35. C to E

C to E

Figure 327 Fabricated Cross

Figure 227 Cast Cross

Figures 227 Cast & 327 Fabricated CrossesTech Data Sheet: G180

C to E

C to E

Groo

veD

Fitt

inGs

GROOvED FiTTiNGS

70 www.grinnell.com

Figure 360 Cap Fabricated

Figure 260 Cap Cast

Figure 260/360 Cap with Tap

Size mm (in)

13mm (1⁄2")Tap

19mm ( 3⁄4")Tap

25mm (1")Tap

32 (1-1⁄4) • – –

40 (1-1⁄2) • – –

50 (2) • – –

65 (2-1⁄2) • • –

80 (3) • • •

100 (4) • • •

125 (5) • • •

150 (6) • • •

200 (8) • • •

250 (10) • • •

300 (12) • • •

350 (14) • • •

400 (16) • • •

450 (18) • • •

500 (20) • • •

600 (24) • • •


Nominal mm

Inches

O.D.mm

Inches

E to Emm

Inches

ApproxWeight

KgLbs.

E to Emm

Inches

ApproxWeight

KgLbs.

25 33.7 21.1 0.1 – –1 1.315 0.83 0.2 – –

32 42.4 21.1 0.1 – –1-1⁄4 1.660 0.83 0.3 – –

40 48.3 21.1 0.2 – –1-1⁄2 1.900 0.83 0.4 – –

50 60.3 23.4 0.3 – –2 2.375 0.92 0.7 – –

65 73.0 23.4 0.5 – –2-1⁄2 2.875 0.92 1.0 – –

65 76.1 21.8 0.6 – –– 3.000 0.86 1.3 – –

80 88.9 23.4 0.6 – –3 3.500 0.92 1.4 – –

100 114.3 25.4 1.2 – –4 4.500 1.00 2.6 – –

125 139.7 23.4 2.1 – –– 5.500 0.92 4.7 – –

125 141.3 25.4 2.3 – –5 5.563 1.00 5.0 – –

150 165.1 23.4 2.9 – –– 6.500 0.92 6.4 – –

150 168.3 25.4 2.8 – –6 6.625 1.00 6.2 – –

200 219.1 27.0 3.2 – –8 8.625 1.06 7.1 – –

250 273.0 25.8 11.1 – –10 10.750 1.02 24.5 – –

300 323.9 25.8 14.1 – –12 12.750 1.02 31.0 – –

350 355.6 – – 215.9 16.614 14.000 – – 8.50 36.5

400 406.4 – – 228.6 19.716 16.000 – – 9.00 43.5

450 457.2 – – 254.0 25.618 18.000 – – 10.00 57.0

500 508.0 – – 279.4 34.320 20.000 – – 11.00 75.7

600 609.6 – – 317.5 45.824 24.000 – – 12.50 101.0



E to E

E to E

NPT

Figures 260 & 360 End CapsTech Data Sheet: G180

Groo

veD

Fitt

inGs

GROOvED FiTTiNGS


Pipe Size Figure 341 - ANSI Class 150# Figure 342 - ANSI Class 300#Nominal

mmInches

O.D.mm

Inches

E to Emm

Inches

Mating Flange BoltQty.

Approx. Weightkg

Lbs.

E to Emm

Inches


Approx. Weightkg

Lbs.

32 42.4 101.64

1.7 101.64

2.11-1⁄4 1.660 4.00 3.7 4.00 4.6

40 48.3 101.64

1.8 101.64

3.21-1⁄2 1.900 4.00 3.9 4.00 7.1

50 60.3 101.64

2.8 101.68

3.72 2.375 4.00 6.4 4.00 8.2

65 73.0 101.64

4.0 101.68

5.42-1⁄2 2.875 4.00 8.8 4.00 11.9

80 88.9 101.64

4.7 101.68

7.03 3.500 4.00 10.4 4.00 15.5

100 114.3 152.48

8.3 152.48

12.74 4.500 6.00 18.2 6.00 28.0

125 141.3 152.48

10.0 152.48

16.85 5.563 6.00 22.0 6.00 37.0

150 168.3 152.48

12.7 152.412

21.86 6.625 6.00 28.1 6.00 48.0

200 219.1 152.48

19.8 152.412

35.88 8.625 6.00 43.7 6.00 79.0

250 273.0 203.212

30.9 203.216

55.310 10.750 8.00 68.2 8.00 122.0

300 323.9 203.212

43.6 203.216

83.012 12.750 8.00 96.1 8.00 183.0

350 355.6 203.212

55.8 203.220

90.314 14.000 8.00 123.0 8.00 199.0

400 406.4 203.216

68.5 203.220

155.716 16.000 8.00 151.0 8.00 255.0

450 457.2 203.216

74.8 203.224

137.418 18.000 8.00 165.0 8.00 303.0

500 508.0 203.220

93.0 203.224

165.620 20.000 8.00 205.0 8.00 365.0

600 609.6 203.220

120.2 203.224

249.524 24.000 8.00 265.0 8.00 550.0


Figure 341 Fabricated Flange Adapter

ANSI Class 150#

E to E E to E


ANSI Class 300#

Figure 341 Flange Adapters (ANSI Class 150#) Figure 342 Flange Adapters (ANSI Class 300#)


Groo

veD

Fitt

inGs

GROOvED FiTTiNGS

72 www.grinnell.com

Figures 407GT & 407T Dielectric WaterwaysTech Data Sheet: G180

Clearflow* Fittings protect plumbing systems through an innovative steel-to-plastic design that establishes a dielectric waterway. The dielectric fittings separate dissimilar metals in the electrolyte (waterway), eliminating the local galvanic cell.

The Clearflow Fittings metal-to-metal joint design maintains external electrical continuity, thereby preventing stray current corrosion. This feature is critical when stray current is present due to intentional or non-intentional grounding of direct current (DC) sources, such as phone systems and appliances.

Fittings meet the requirements of ASTM F 492 for continuous use at temperatures up to 110°C (230°F).

Test data/results and listings by Pittsburgh Testing Laboratory can be provided upon request. Contact GRINNELL Mechanical Products

Figure 407GTDielectric Waterway

Figure 407TDielectric Waterway

Pipe SizeFigure 407GT

Grooved x Male ThreadFigure 407T

Male Thread x Male Thread

Nominal mm

Inches

O.D.mm

Inches

End to Endmm

Inches

Approx.Weight

kgLbs.

End to Endmm

Inches

Approx.Weight

kgLbs.

15 21.3 76.2 0.11⁄2 0.840 – – 3.0 0.2

20 26.7 76.2 0.13⁄4 1.050 – – 3.0 0.2

25 33.7 101.6 0.1 101.6 0.11 1.315 4.0 0.3 4.0 0.3

32 42.4 101.6 0.3 101.6 0.31-1⁄4 1.600 4.0 0.6 4.0 0.6

40 48.3 101.6 0.4 101.6 0.41-1⁄2 1.900 4.0 0.8 4.0 0.8

50 60.3 101.6 0.5 101.6 0.52 2.375 4.0 1.0 4.0 1.0

65 73.0 152.4 0.7 152.4 0.72-1⁄2 2.875 6.0 1.6 6.0 1.6

80 88.9 152.4 0.9 152.4 0.93 3.500 6.0 2.0 6.0 2.0

100 114.3 152.4 2.0 152.4 2.04 4.500 6.0 4.5 6.0 4.5

Forinformationonlargersizes,contactGRINNELLMechanicalProducts.Seefittingspecificationsonpage35.* Clearflow is a Registered Trademark of Perfection Corp.

E to E

E to E

MeCh

aniC

al te

esmECHANiCAL TEES

74 www.grinnell.com

The Figure 730 Mechanical Tee is rated at 3,447 kPa (500 psi) on standard weight pipe. It can be used in place of a tee, a cross connection, or a welded outlet where a threaded or grooved outlet is needed. The Mechanical Tee is ideal for use in retrofit or equipment hookup installations as it can be positioned along the pipe at the proper location in the field, ensuring exact lineup of the branch outlet connection.

All Figure 730 Mechanical Tees are provided with a ductile iron lower housing section for increased strength and dependability. This design provides stability and rigidity while inhibiting damage to the pipe during tightening.

MATERIAL SPECIFICATIoNSHousing Specifications

• ASTM A 536 – Standard specification for ductile iron castings, Grade 65-45-12

• Tensile Strength, minimum 448,159 kPa (65,000 psi)• Yield Strength, minimum 310,264 kPa (45,000 psi) • Elongation in 50mm (2"), minimum 12%• ASTM A 153 – Standard specification for

hot-dip galvanising

Bolt/Nut Specifications • Carbon steel oval neck bolts and nuts are heat

treated and conform to the physical properties of ASTM A 183 with a minimum tensile strength of 758,422 kPa (110,000 psi). Bolts and nuts are zinc electroplated to ASTM B 633.


• Stainless Steel nuts and bolts are UL listed and comply to UL requirements. Bolts conform to ASTM A 193M, Class 2, Austenitic Stainless Steel. Nuts conform to ASTM A 194 Type 316, Grade 8M.


code identification and conform to ASTM D 2000 for service temperatures from -34°C to 110°C (-30°F to 230°F). They are recommended for hot water not to exceed 110°C (230°F), plus a variety of dilute acids, oil free air, and many chemical services. They are not recommended for petroleum services.

• Grade “T” Nitrile gaskets have an orange colour code identification and conform to ASTM D 2000 for service temperatures from -29°C to 82°C ( -20°F to 180°F). They are recommended for petroleum products, vegetable oils, mineral oils, and air with oil vapours.



Threaded Tees & Crosses

Figure 730 Female Threaded Tees

Pages – 75 - 77

Figure 730 Female Threaded Crosses

Pages – 75 - 77

Grooved Tees & Crosses

Figure 730 Grooved Tees

Pages – 78 - 80

Figure 730 Grooved CrossesPages – 78 - 80



Mechanical Tees Pictorial Table of Contents

MeCh

aniC

al te

es

mECHANiCAL TEES


Nominal Size Run x Branch

mmInches

Hole Dia.† Max.‡ Branch

End LoadkN

Lbs.

Dimensions - mm Inches Bolt Size mm

Inches

Tee Approx. Weight

kgLbs.

Cross Approx. Weight

kgLbs.

Min.mm

Inches

Max.mm

InchesA B C D E

50 x 15 38.1 41.3 1.2 66.5 124.0 78.0 53.8 40.4 M10 x 57 1.1 1.52 x 1⁄2 1.50 1.63 277.1 2.62 4.88 3.07 2.12 1.59 3⁄8 x 2-1⁄4 2.5 3.450 x 20 38.1 41.3 1.9 66.5 124.0 78.0 53.8 40.4 M10 x 57 1.0 1.42 x 3⁄4 1.50 1.63 433.0 2.62 4.88 3.07 2.12 1.59 3⁄8 x 2-1⁄4 2.3 3.050 x 25 38.1 41.3 3.0 66.5 124.0 78.0 53.8 40.4 M10 x 57 1.0 1.52 x 1 1.50 1.63 679.1 2.62 4.88 3.07 2.12 1.59 3⁄8 x 2-1⁄4 2.2 3.2

50 x 32 44.5 47.6 4.8 70.6 124.0 84.3 49.0 40.4 M10 x 57 1.1 1.52 x 1-1⁄4 1.75 1.88 1082.1 2.78 4.88 3.32 1.93 1.59 3⁄8 x 2-1⁄4 2.4 3.450 x 40 44.5 47.6 6.3 69.9 124.0 84.3 49.0 40.4 M10 x 57 1.1 1.82 x 1-1⁄2 1.75 1.88 1417.6 2.75 4.88 3.32 1.93 1.59 3⁄8 x 2-1⁄4 2.5 3.965 x 15 38.1 41.3 1.2 73.2 133.4 78.0 60.5 46.0 M10 x 57 1.1 1.5

2-1⁄2 x 1⁄2 1.50 1.63 277.1 2.88 5.25 3.07 2.38 1.81 3⁄8 x 2-1⁄4 2.4 3.465 x 20 38.1 41.3 1.9 73.2 133.4 78.0 60.5 46.0 M10 x 57 1.1 1.5

2-1⁄2 x 3⁄4 1.50 1.63 433.0 2.88 5.25 3.07 2.38 1.81 3⁄8 x 2-1⁄4 2.4 3.465 x 25 38.1 41.3 3.0 73.2 133.4 78.0 60.5 46.0 M10 x 57 1.1 1.52-1⁄2 x 1 1.50 1.63 679.1 2.88 5.25 3.07 2.38 1.81 3⁄8 x 2-1⁄4 2.4 3.465 x 32 50.8 54.0 4.8 76.2 133.4 90.4 55.6 46.0 M10 x 57 1.1 1.7

2-1⁄2 x 1-1⁄4 2.00 2.13 1082.1 3.00 5.25 3.56 2.19 1.81 3⁄8 x 2-1⁄4 2.5 3.865 x 40 50.8 54.0 6.3 78.0 133.4 91.2 55.1 46.0 M10 x 57 1.2 1.9

2-1⁄2 x 1-1⁄2 2.00 2.13 1417.6 3.07 5.25 3.59 2.17 1.81 3⁄8 x 2-1⁄4 2.6 4.165 x 50 50.8 54.0 9.9 81.0 133.4 101.6 62.0 46.0 M10 x 57 1.2 1.92-1⁄2 x 2 2.00 2.13 2215.1 3.19 5.25 4.00 2.44 1.81 3⁄8 x 2-1⁄4 2.7 4.165 x 15 38.1 41.3 1.2 74.5 142.7 78.0 62.0 47.5 M10 x 57 1.1 1.6

76.1mm x 1⁄2 1.50 1.63 277.1 2.94 5.62 3.07 2.44 1.87 – 2.5 3.565 x 20 38.1 41.3 1.9 74.5 142.7 78.0 62.0 47.5 M10 x 57 1.1 1.6

76.1mm x 3⁄4 1.50 1.63 433.0 2.94 5.62 3.07 2.44 1.87 – 2.5 3.565 x 25 38.1 41.3 3.0 74.5 142.7 78.0 62.0 47.5 M10 x 57 1.1 1.6

76.1mm x 1 1.50 1.63 679.1 2.94 5.62 3.07 2.44 1.87 – 2.5 3.565 x 32 50.8 54.0 4.8 77.7 142.7 90.4 57.2 47.5 M10 x 57 1.5 2.3

76.1mm x 1-1⁄4 2.00 2.13 1082.1 3.06 5.62 3.56 2.25 1.87 – 3.3 5.165 x 40 50.8 54.0 6.3 79.5 142.7 90.4 57.2 47.5 M10 x 57 1.6 2.6

76.1mm x 1-1⁄2 2.00 2.13 1417.6 3.13 5.62 3.56 2.25 1.87 – 3.6 5.765 x 50 50.8 54.0 9.9 82.6 142.7 101.6 63.5 47.5 M10 x 57 1.7 2.6

76.1mm x 2 2.00 2.13 2215.1 3.25 5.62 4.00 2.50 1.87 – 3.7 5.880 x 15 38.1 41.3 1.2 81.0 155.7 78.0 65.0 56.1 M12 x 89 1.7 2.43 x 1⁄2 1.50 1.63 277.1 3.19 6.13 3.07 2.56 2.21 1⁄2 x 3 3.7 5.2

Figure 730 Branch Outlet with Female NPT/BSP Threaded Branch

(Tee Configuration)


(Cross Configuration)

Figure 730 Branch Outlet with a Female NPT/BSP Threaded Branch and a Grooved

Branch (Cross Configuration)

BC

HoleDia.

A

E

D

Takeout

A

A

D

D

HoleDia.

BC

Takeout

A

A

D

BC

HoleDia.Takeout

Figure 730 Mechanical Tees & Crosses – Threaded(Page 1 of 3)


MeCh

aniC

al te

esmECHANiCAL TEES

76 www.grinnell.com




mmInches


End LoadkN

Lbs.


Inches

Tee Approx. Weight

kgLbs.


kgLbs.

Min.mm

Inches

Max.mm

InchesA B C D E

80 x 20 38.1 41.3 1.9 81.0 155.7 78.0 65.0 56.1 M12 x 89 1.7 2.43 x 3⁄4 1.50 1.63 433.0 3.19 6.13 3.07 2.56 2.21 1⁄2 x 3 3.7 5.280 x 25 38.1 41.3 3.0 81.0 155.7 78.0 65.0 56.1 M12 x 89 1.7 2.43 x 1 1.50 1.63 679.1 3.19 6.13 3.07 2.56 2.21 1⁄2 x 3 3.7 5.2

80 x 32 44.5 47.6 4.8 84.8 155.7 84.3 63.5 56.1 M12 x 89 1.6 2.13 x 1-1⁄4 1.75 1.88 1082.1 3.34 6.13 3.32 2.50 2.21 1⁄2 x 3 3.5 4.680 x 40 50.8 54.0 6.3 85.9 155.7 90.4 63.0 56.1 M12 x 89 1.7 2.43 x 1-1⁄2 2.00 2.13 1417.6 3.38 6.13 3.56 2.48 2.21 1⁄2 x 3 3.7 5.280 x 50 63.5 66.7 9.9 88.9 155.7 103.9 69.9 56.1 M12 x 89 2.1 3.13 x 2 2.50 2.63 2215.1 3.50 6.13 4.09 2.75 2.21 1⁄2 x 3 4.7 6.8

100 x 15 38.1 41.3 1.2 93.7 181.1 78.0 77.7 70.6 M12 x 89 2.2 2.54 x 1⁄2 1.50 1.63 277.1 3.69 7.13 3.07 3.06 2.78 1⁄2 x 3 4.8 5.6

100 x 20 38.1 41.3 1.9 93.7 181.1 78.0 77.7 70.6 M12 x 89 2.2 2.54 x 3⁄4 1.50 1.63 433.0 3.69 7.13 3.07 3.06 2.78 1⁄2 x 3 4.8 5.6

100 x 25 38.1 41.3 3.0 93.7 181.1 78.0 77.7 70.6 M12 x 89 2.2 2.54 x 1 1.50 1.63 679.1 3.69 7.13 3.07 3.06 2.78 1⁄2 x 3 4.8 5.6

100 x 32 44.5 47.6 4.8 99.6 181.1 84.3 76.2 70.6 M12 x 89 2.2 2.54 x 1-1⁄4 1.75 1.88 1082.1 3.92 7.13 3.32 3.00 2.78 1⁄2 x 3 4.8 5.6100 x 40 50.8 54.0 6.3 101.6 181.1 90.4 75.7 70.6 M12 x 89 2.3 2.54 x 1-1⁄2 2.00 2.13 1417.6 4.00 7.13 3.56 2.98 2.78 1⁄2 x 3 5.1 6.4100 x 50 63.5 66.7 9.9 101.6 181.1 103.1 82.6 70.6 M12 x 89 2.5 3.3

4 x 2 2.50 2.63 2215.1 4.00 7.13 4.06 3.25 2.78 1⁄2 x 3 5.5 7.3100 x 65 69.9 73.0 14.4 101.6 181.1 111.3 79.2 70.6 M12 x 89 2.8 3.94 x 2-1⁄2 2.75 2.88 3245.9 4.00 7.13 4.38 3.12 2.78 1⁄2 x 3 6.2 8.7100 x 65 69.9 73.0 15.7 101.6 181.1 111.3 79.2 70.6 M12 x 89 2.8 3.9

4 x 76.1mm 2.75 2.88 3534.3 4.00 7.13 4.38 3.12 2.78 – 6.2 8.7100 x 80 88.9 92.1 21.4 104.9 181.1 130.3 84.1 70.6 M12 x 89 3.5 5.4

4 x 3 3.50 3.63 4810.6 4.13 7.13 5.13 3.31 2.78 1⁄2 x 3 7.8 11.9125 x 40 50.8 54.0 6.3 117.6 206.5 90.4 101.6 85.6 M16 x 121 3.5 4.35 x 1-1⁄2 2.00 2.13 1417.6 4.63 8.13 3.56 4.00 3.37 5⁄8 x 4-3⁄4 7.8 9.4125 x 50 63.5 66.7 9.9 117.6 206.5 103.1 98.6 85.6 M16 x 121 3.5 4.3

5 x 2 2.50 2.63 2215.1 4.63 8.13 4.06 3.88 3.37 5⁄8 x 4-3⁄4 7.8 9.4125 x 65 69.9 73.0 14.4 120.7 206.5 111.3 98.6 85.6 M16 x 121 4.0 5.25 x 2-1⁄2 2.75 2.88 3245.9 4.75 8.13 4.38 3.88 3.37 5⁄8 x 4-3⁄4 8.9 11.5125 x 65 69.9 73.0 15.7 120.7 206.5 111.3 98.6 85.6 M16 x 121 4.0 5.2

5 x 76.1mm 2.75 2.88 3534.3 4.75 8.13 4.38 3.88 3.37 – 8.9 11.5125 x 80 88.9 92.1 21.4 127.0 206.5 130.3 103.1 85.6 M16 x 121 5.8 6.0

5 x 3 3.50 3.63 4810.6 5.00 8.13 5.13 4.06 3.37 5⁄8 x 4-3⁄4 12.7 13.3150 x 32 50.8 54.0 4.8 130.3 235.0 90.4 108.0 99.1 M16 x 121 3.5 4.3

165.1mm x 1-1⁄4 2.00 2.13 1082.1 5.13 9.25 3.56 4.25 3.90 – 7.7 9.5150 x 40 50.8 54.0 6.3 130.3 235.0 90.4 102.6 99.1 M16 x 121 3.5 4.3

165.1mm x 1-1⁄2 2.00 2.13 1417.6 5.13 9.25 3.56 4.04 3.90 – 7.7 9.5150 x 50 63.5 66.7 9.9 130.3 235.0 103.1 109.5 99.1 M16 x 121 3.7 4.3

165.1mm x 2 2.50 2.63 2215.1 5.13 9.25 4.06 4.31 3.90 – 8.2 9.5


(Tee Configuration)





BC

HoleDia.

A

E

D

Takeout

A

A

D

D

HoleDia.

BC

Takeout

A

A

D

BC

HoleDia.Takeout

MeCh

aniC

al te

es

mECHANiCAL TEES





mmInches


End LoadkN

Lbs.


Inches

Tee Approx. Weight

kgLbs.


kgLbs.

Min.mm

Inches

Max.mm

InchesA B C D E

150 x 65 69.9 73.0 14.4 130.3 235.0 111.3 106.2 99.1 M16 x 121 4.1 5.1165.1mm x 2-1⁄2 2.75 2.88 3245.9 5.13 9.25 4.38 4.18 3.90 – 9.0 11.3

150 x 65 69.9 73.0 15.7 130.3 235.0 111.3 106.2 99.1 M16 x 121 4.1 5.1165.1mm x 76.1mm 2.75 2.88 3584.3 5.13 9.25 4.38 4.18 3.90 – 9.0 11.3

150 x 80 88.9 92.1 21.4 139.7 235.0 130.3 111.0 99.1 M16 x 121 4.8 6.4165.1mm x 3 3.50 3.63 4810.6 5.50 9.25 5.13 4.37 3.90 – 10.5 14.1

150 x 100 114.3 117.5 35.4 136.7 235.0 155.7 115.8 99.1 M16 x 121 5.5 7.8165.1mm x 4 4.50 4.63 7952.2 5.38 9.25 6.13 4.56 3.90 – 12.1 17.3

150 x 32 50.8 54.0 4.8 130.3 235.0 90.4 108.0 99.1 M16 x 121 3.4 3.96 x 1-1⁄4 2.00 2.13 1082.1 5.13 9.25 3.56 4.25 3.90 5⁄8 x 4-3⁄4 7.5 8.7150 x 40 50.8 54.0 6.3 130.3 235.0 90.4 102.6 99.1 M16 x 121 3.4 3.96 x 1-1⁄2 2.00 2.13 1417.6 5.13 9.25 3.56 4.04 3.90 5⁄8 x 4-3⁄4 7.5 8.7150 x 50 63.5 66.7 9.9 130.3 235.0 103.1 109.5 99.1 M16 x 121 3.5 4.3

6 x 2 2.50 2.63 2215.1 5.13 9.25 4.06 4.31 3.90 5⁄8 x 4-3⁄4 7.7 9.5150 x 65 69.9 73.0 14.4 130.3 235.0 111.3 106.2 99.1 M16 x 121 4.0 5.16 x 2-1⁄2 2.75 2.88 3245.9 5.13 9.25 4.38 4.18 3.90 5⁄8 x 4-3⁄4 8.9 11.3150 x 65 69.9 73.0 14.4 130.3 235.0 111.3 106.2 99.1 M16 x 121 4.0 5.1

6 x 76.1mm 2.75 2.88 3245.9 5.13 9.25 4.38 4.18 3.90 5⁄8 x 4-3⁄4 8.9 11.3150 x 80 88.9 92.1 21.4 139.7 235.0 130.3 111.0 99.1 M16 x 121 4.7 6.4

6 x 3 3.50 3.63 4810.6 5.50 9.25 5.13 4.37 3.90 5⁄8 x 4-3⁄4 10.3 14.1150 x 100 114.3 117.5 35.4 136.7 235.0 155.7 115.8 99.1 M16 x 121 5.4 7.8

6 x 4 4.50 4.63 7952.2 5.38 9.25 6.13 4.56 3.90 5⁄8 x 4-3⁄4 11.9 17.3200 x 50 69.9 73.0 14.4 158.8 317.5 103.1 130.0 124.5 M20 x 121 5.5 6.4

8 x 2 2.75 2.88 3245.9 6.25 12.50 4.06 5.12 4.90 3⁄4 x 4-3⁄4 12.1 14.1200 x 65 69.9 73.0 14.4 158.8 317.5 111.3 130.0 124.5 M20 x 121 5.7 6.88 x 2-1⁄2 2.75 2.88 3245.9 6.25 12.50 4.38 5.12 4.90 3⁄4 x 4-3⁄4 12.6 15.0200 x 65 69.9 73.0 15.7 158.8 317.5 111.3 130.0 124.5 M20 x 121 5.7 6.8

8 x 76.1mm 2.75 2.88 3534.3 6.25 12.50 4.38 5.12 4.90 – 12.6 15.0200 x 80 88.9 92.1 21.4 165.1 317.5 130.3 136.4 124.5 M20 x 121 6.1 7.7

8 x 3 3.50 3.63 4810.6 6.50 12.50 5.13 5.37 4.90 3⁄4 x 4-3⁄4 13.6 16.9200 x 100 114.3 117.5 35.4 162.1 317.5 155.7 141.2 124.5 M20 x 121 6.9 9.1

8 x 4 4.50 4.63 7952.2 6.38 12.50 6.13 5.56 4.90 3⁄4 x 4-3⁄4 15.2 20.0

† Properholepreparationisrequiredforeffectivesealingandperformance.Checkthepipesealsurfacewithin15.9mm( 5⁄8")oftheholetoensureitisfreefromconditionsaffectingpropergasketsealing.Removeanysharporroughedgesfromtheholeorupperhousingcontactareathatmightaffectassembly,properseatingofthelocatingcollar,orflowfromtheoutlet.Forcrosses,ensuredoubleoutletholesarealignedonoppositesidesofthepipe.Theuseofthreadedproductsotherthansteelpipe,suchasdrypendentsprinklers,maynotbecompatiblewiththefemalethreadedoutletontheMechanicalTee.AlwaysconfirmcompatibilitybycontactingGRINNELLMechanicalProducts.

‡ Maximumpressuresandendloadsaretotalfromallloadsbasedonstandardweightsteelpipe.Pressureratingsandendloadsmaydifferonotherpipematerialsand/orwallthickness.ContactGRINNELLMechanicalProductsfordetails.

ThreadsareNPT.SomesizeoutletsareavailablewithBSPthreads.ContactGRINNELLMechanicalProductsfordetails.Forinformationonlargersizes,Chinesesizesorotheralternativesizes,contactGRINNELLMechanicalProducts.Seepage74formechanicalteespecifications,andseepages140-146forgasketinformation.


(Tee Configuration)





BC

HoleDia.

A

E

D

Takeout

A

A

D

D

HoleDia.

BC

Takeout

A

A

D

BC

HoleDia.Takeout

MeCh

aniC

al te

esmECHANiCAL TEES

78 www.grinnell.com


mmInches

Hole Dia.† Max.‡ End Load Branch

kNLbs.

Dimensions - mm Inches BoltSize mm

Inches

Tee Approx. Weight

kgLbs.


kgLbs.

Min.mm

Inches

Max.mm

InchesA B C D

50 x 32 44.5 47.6 4.8 70.6 124.0 84.3 40.4 M10 x 57 1.1 1.52 x 1-1⁄4 1.75 1.88 1082.1 2.78 4.88 3.32 1.59 3⁄8 x 2-1⁄4 2.5 3.3

50 x 40 44.5 47.6 6.3 66.5 124.0 84.3 40.4 M10 x 57 1.1 1.72 x 1-1⁄2 1.75 1.88 1417.6 2.62 4.88 3.32 1.59 3⁄8 x 2-1⁄4 2.4 3.7

65 x 32 50.8 54.0 4.8 76.2 133.4 90.4 46.0 M10 x 57 1.1 1.72-1⁄2 x 1-1⁄4 2.00 2.13 1082.1 3.00 5.25 3.56 1.81 3⁄8 x 2-1⁄4 2.5 3.8

65 x 40 50.8 54.0 6.3 78.0 133.4 91.2 46.0 M10 x 57 1.1 1.82-1⁄2 x 1-1⁄2 2.00 2.13 1417.6 3.07 5.25 3.59 1.81 3⁄8 x 2-1⁄4 2.5 3.9

65 x 50 50.8 54.0 9.9 81.0 133.4 101.6 46.0 M10 x 57 1.1 1.72-1⁄2 x 2 2.00 2.13 2215.1 3.19 5.25 4.00 1.81 3⁄8 x 2-1⁄4 2.5 3.8

65 x 32 50.8 54.0 4.8 77.7 142.7 90.4 47.5 M10 x 57 1.1 1.776.1mm x 1-1⁄4 2.00 2.13 1082.1 3.06 5.62 3.56 1.87 – 2.5 3.8

65 x 40 50.8 54.0 6.3 79.5 142.7 90.4 47.5 M10 x 57 1.1 1.876.1mm x 1-1⁄2 2.00 2.13 1417.6 3.13 5.62 3.56 1.87 – 2.5 3.9

65 x 50 50.8 54.0 9.9 82.6 142.7 101.6 47.5 M10 x 57 1.1 1.776.1mm x 2 2.00 2.13 2215.1 3.25 5.62 4.00 1.87 – 2.5 3.8

80 x 32 44.5 47.6 4.8 84.8 155.7 84.3 56.1 M12 x 89 1.6 2.13 x 1-1⁄4 1.75 1.88 1082.1 3.34 6.13 3.32 2.21 1⁄2 x 3 3.5 4.6

80 x 40 50.8 54.0 6.3 85.9 155.7 90.4 56.1 M12 x 89 1.6 2.33 x 1-1⁄2 2.00 2.13 1417.6 3.38 6.13 3.56 2.21 1⁄2 x 3 3.6 5.0

80 x 50 63.5 66.7 9.9 88.9 155.7 103.9 56.1 M12 x 89 2.0 2.93 x 2 2.50 2.63 2215.1 3.50 6.13 4.09 2.21 1⁄2 x 3 4.5 6.4

100 x 32 44.5 47.6 4.8 99.6 181.1 84.3 70.6 M12 x 89 2.2 2.54 x 1-1⁄4 1.75 1.88 1082.1 3.92 7.13 3.32 2.78 1⁄2 x 3 4.8 5.6

Figure 730 Branch Outlet with Grooved Branch(Tee Configuration)

Figure 730 Branch Outlet with Grooved Branch(Cross Configuration)

HoleDia.

A

D

BC

HoleDia.

BC

A

A

Figure 730 Mechanical Tees & Crosses – Grooved(Page 1 of 3)




A

A

D

BC

HoleDia.Takeout

MeCh

aniC

al te

es

mECHANiCAL TEES







mmInches


kNLbs.


Inches

Tee Approx. Weight

kgLbs.


kgLbs.

Min.mm

Inches

Max.mm

InchesA B C D

100 x 40 50.8 54.0 6.3 101.6 181.1 90.4 70.6 M12 x 89 2.3 2.84 x 1-1⁄2 2.00 2.13 1417.6 4.00 7.13 3.56 2.78 1⁄2 x 3 5.0 6.2

100 x 50 63.5 66.7 9.9 101.6 181.1 103.1 70.6 M12 x 89 2.4 3.14 x 2 2.50 2.63 2215.1 4.00 7.13 4.06 2.78 1⁄2 x 3 5.3 6.9

100 x 65 69.9 73.0 14.4 101.6 181.1 111.3 70.6 M12 x 89 2.7 3.74 x 2-1⁄2 2.75 2.88 3245.9 4.00 7.13 4.38 2.78 1⁄2 x 3 5.9 8.2

100 x 65 69.9 73.0 15.7 101.6 181.1 111.3 70.6 M12 x 89 2.7 3.74 x 76.1mm 2.75 2.88 3534.3 4.00 7.13 4.38 2.78 – 5.9 8.2

100 x 80 88.9 92.1 21.4 104.9 181.1 130.3 70.6 M12 x 89 3.4 5.04 x 3 3.50 3.63 4810.6 4.13 7.13 5.13 2.78 1⁄2 x 3 7.4 11.1

125 x 40 50.8 54.0 6.3 117.6 206.5 90.4 85.6 M16 x 121 3.5 4.25 x 1-1⁄2 2.00 2.13 1417.6 4.63 8.13 3.56 3.37 5⁄8 x 4-3⁄4 7.7 9.2

125 x 50 63.5 66.7 9.9 117.6 206.5 103.1 85.6 M16 x 121 3.4 4.15 x 2 2.50 2.63 2215.1 4.63 8.13 4.06 3.37 5⁄8 x 4-3⁄4 7.6 9.0

125 x 65 69.9 73.0 14.4 120.7 206.5 111.3 85.6 M16 x 121 3.9 5.05 x 2-1⁄2 2.75 2.88 3245.9 4.75 8.13 4.38 3.37 5⁄8 x 4-3⁄4 8.6 11.0

125 x 65 69.9 73.0 15.7 120.7 206.5 111.3 85.6 M16 x 121 3.9 5.05 x 76.1mm 2.75 2.88 3534.3 4.75 8.13 4.38 3.37 – 8.6 11.0

125 x 80 88.9 92.1 21.4 127.0 206.5 130.3 85.6 M16 x 121 5.6 5.75 x 3 3.50 3.63 4810.6 5.00 8.13 5.13 3.37 5⁄8 x 4-3⁄4 12.3 12.5

150 x 32 50.8 54.0 4.8 130.3 235.0 90.4 99.1 M16 x 121 3.5 4.3165.1mm x 1-1⁄4 2.00 2.13 1082.1 5.13 9.25 3.56 3.90 – 7.7 9.5

150 x 40 50.8 54.0 6.3 130.3 235.0 90.4 99.1 M16 x 121 3.4 4.2165.1mm x 1-1⁄2 2.00 2.13 1417.6 5.13 9.25 3.56 3.90 – 7.6 9.3

150 x 50 63.5 66.7 9.9 130.3 235.0 103.1 99.1 M16 x 121 3.6 4.1165.1mm x 2 2.50 2.63 2215.1 5.13 9.25 4.06 3.90 – 8.0 9.1

150 x 65 69.9 73.0 14.4 130.3 235.0 111.3 99.1 M16 x 121 4.0 4.9165.1mm x 2-1⁄2 2.75 2.88 3245.9 5.13 9.25 4.38 3.90 – 8.8 10.8

150 x 65 69.9 73.0 15.7 130.3 235.0 111.3 99.1 M16 x 121 4.0 4.9165.1mm x 76.1mm 2.75 2.88 3534.3 5.13 9.25 4.38 3.90 – 8.8 10.8

150 x 80 88.9 92.1 21.4 139.7 235.0 130.3 99.1 M16 x 121 4.6 6.0165.1mm x 3 3.50 3.63 4810.6 5.50 9.25 5.13 3.90 – 10.1 13.3

150 x 100 114.3 117.5 35.4 136.7 235.0 155.7 99.1 M16 x 121 5.3 7.4165.1mm x 4 4.50 4.63 7952.2 5.38 9.25 6.13 3.90 – 11.6 16.3

HoleDia.

A

D

BC

HoleDia.

BC

A

A



A

A

D

BC

HoleDia.Takeout

MeCh

aniC

al te

esmECHANiCAL TEES

80 www.grinnell.com


mmInches


kNLbs.


Inches

Tee Approx. Weight

kgLbs.


kgLbs.

Min.mm

Inches

Max.mm

InchesA B C D

150 x 32 50.8 54.0 4.8 130.3 235.0 90.4 99.1 M16 x 121 3.5 4.36 x 1-1⁄4 2.00 2.13 1082.1 5.13 9.25 3.56 3.90 5⁄8 x 4-3⁄4 7.7 9.5

150 x 40 50.8 54.0 6.3 130.3 235.0 90.4 99.1 M16 x 121 3.4 4.26 x 1-1⁄2 2.00 2.13 1417.6 5.13 9.25 3.56 3.90 5⁄8 x 4-3⁄4 7.6 9.3

150 x 50 63.5 66.7 9.9 130.3 235.0 103.1 99.1 M16 x 121 3.6 4.16 x 2 2.50 2.63 2215.1 5.13 9.25 4.06 3.90 5⁄8 x 4-3⁄4 8.0 9.1

150 x 65 69.9 73.0 14.4 130.3 235.0 111.3 99.1 M16 x 121 4.0 4.96 x 2-1⁄2 2.75 2.88 3245.9 5.13 9.25 4.38 3.90 5⁄8 x 4-3⁄4 8.8 10.8

150 x 80 88.9 92.1 21.4 139.7 235.0 130.3 99.1 M16 x 121 4.6 6.06 x 3 3.50 3.63 4810.6 5.50 9.25 5.13 3.90 5⁄8 x 4-3⁄4 10.1 13.3

150 x 100 114.3 117.5 35.4 136.7 235.0 155.7 99.1 M16 x 121 5.3 7.46 x 4 4.50 4.63 7952.2 5.38 9.25 6.13 3.90 5⁄8 x 4-3⁄4 11.6 16.3

200 x 65 69.9 73.0 14.4 158.8 317.5 111.3 124.5 M20 x 121 5.6 6.68 x 2-1⁄2 2.75 2.88 3245.9 6.25 12.50 4.38 4.90 3⁄4 x 4-3⁄4 12.3 14.5

200 x 65 69.9 73.0 15.7 158.8 317.5 111.3 124.5 M20 x 121 5.6 6.68 x 76.1mm 2.75 2.88 3534.3 6.25 12.50 4.38 4.90 – 12.3 14.5

200 x 80 88.9 92.1 21.4 165.1 317.5 130.3 124.5 M20 x 121 6.0 7.38 x 3 3.50 3.63 4810.6 6.50 12.50 5.13 4.90 3⁄4 x 4-3⁄4 13.2 16.1

200 x 100 114.3 117.5 35.4 162.1 317.5 155.7 124.5 M20 x 121 6.7 8.68 x 4 4.50 4.63 7952.2 6.38 12.50 6.13 4.90 3⁄4 x 4-3⁄4 14.7 19.0

† Properholepreparationisrequiredforeffectivesealingandperformance.Checkthepipesealsurfacewithin15.9mm( 5⁄8")oftheholetoensureitisfreefromconditionsaffectingpropergasketsealing.Removeanysharporroughedgesfromtheholeorupperhousingcontactareathatmightaffectassembly,properseatingofthelocatingcollar,orflowfromtheoutlet.Forcrosses,ensuredoubleoutletholesarealignedonoppositesidesofthepipe.

‡ Maximumpressuresandendloadsaretotalfromallloadsbasedonstandardweightsteelpipe.Pressureratingsandendloadsmaydifferonotherpipematerialsand/orwallthickness.ContactGRINNELLMechanicalProductsfordetails.

Forinformationonlargersizes,Chinesesizesorotheralternativesizes,contactGRINNELLMechanicalProducts.Seepage74formechanicalteespecifications,andseepages140-146forgasketinformation.





HoleDia.

A

D

BC

HoleDia.

BC

A

A



A

A

D

BC

HoleDia.Takeout

valv

esvALvES

82 www.grinnell.com

Model B8101Low Profile Butterfly Valves

Page – 83

Model B302Grooved End Butterfly Valves

Pages – 84 - 87

Model 308Butterfly ValvesPages – 88 - 89

Model BV835Ball Valves

Pages – 90 - 91

Model 590Grooved End Check Valves

Pages – 92 - 93

Model TD830Triple Duty Valves

Page – 94

Valves Pictorial Table of Contents

valv

es

vALvES


Model B8101 Low Profile Butterfly ValvesTech Data Sheet: G330

The Model B8101 Low Profile Butterfly Valve has a rated working pressure of 1,379 kPa (200 psi) and provides efficient control of fluid in piping systems. Flow can be from either direction and the valve may be positioned in any orientation. The ductile iron body is epoxy-coated to resist atmospheric corrosion. The disc is EPDM encapsulated ductile iron compatible with a variety of chemicals and temperature ranges.

MATERIAL SPECIFICATIoNSBody

• Ductile iron

Body Coating• Black epoxy-coated

Disc• Ductile iron

Disc Seal• EPDM encapsulated rubber• Optional: Nitrile

Stem• Two-piece stainless steel, splined

Stem Seal• O-rings, upper and lower stem

Handle• Carbon steel zinc-plated

Performance• Pressure Drop, contact GRINNELL Mechanical Products.

Pipe Size Dimensions - mm InchesNominal

mmInches

O.D.mm

Inches A B C D E F

50 60.3 86.0 152.0 25.0 46.0 50.0 80.0 2 2.375 3.39 5.98 0.98 1.81 1.97 3.15

65 73.0 96.0 152.0 25.0 52.0 61.0 91.02-1⁄2 2.875 3.78 5.98 0.98 2.05 2.40 3.58

80 88.9 96.0 210.0 25.0 65.0 67.0 107.0 3 3.500 3.78 8.27 0.98 2.56 2.64 4.21

100 114.3 115.0 210.0 25.0 83.0 83.0 123.0 4 4.500 4.53 8.27 0.98 3.27 3.27 4.84

150 168.3 132.0 305.0 32.0 109.0 109.0 174.0 6 6.625 5.20 12.01 1.26 4.29 4.29 6.85


A

B

F

D

C

E

valv

esvALvES

84 www.grinnell.com

GRINNELL Model B302 Butterfly Valves are capable of pressures of 2,068 kPa (300 psi) for sizes 50mm – 200mm (2" – 8") and 1,379 kPa (200 psi) for sizes 250mm – 300mm (10" and 12"). The valves are designed for efficient control of: on/off or throttling/balancing service; fluid flow; and “bubble tight” shut-off in piping systems. Flow may be from either direction, and the valve may be positioned in any orientation. The valves are available with either a gear operator, for sizes 50mm – 300mm (2" – 12"), or lever-lock operator, for sizes 50mm – 200mm (2" – 8"). The valves are furnished with grooved ends for use with grooved couplings and can be easily adapted to flanged components utilising GRINNELL Figure 71 Class 150 Flange Adapters.

The body and disc construction provides for increased strength and durability. The disc seal and body coatings are compatible with a variety of chemicals and temperature range. (Contact GRINNELL Mechanical Products for specific recommendations on seal and coating selection).

The Model B302 Butterfly Valve with Gear Operator is a self-locking worm gear type. It is equipped with adjustable stops at the open and shut positions.

The Model B302 Butterfly Valve with Lever-Lock Operator has a throttling plate that provides throttling notches every 10° for manual control in balancing up to 90° or shut off service. The lever may be padlocked in any one of the positions, including opened or closed, by virtue of a locking hole located in the handle and lever.

MATERIAL SPECIFICATIoNSDuctile Iron Body



• Yield strength, minimum 275,790 kPa (40,000 psi)


Disc• Ductile iron ASTM A 395 w/EPDM or Buna-N

encapsulation

Body Coating• Black Polymide-Coated

o-Ring• EPDM or Buna-N

upper and Lower Stem• Type 416 Stainless Steel ASTM A 582

Gear operator• Cast iron housing

Lever-Lock operator• Handle – Iron Polymer-Coated

• Lever-Lock – Steel Zinc-Plated

• Throttling Plate – Steel Zinc-Plated

Disc Seal Specifications Encapsulated Rubber

• EPDM – For service temperatures from -29°C to 121°C (-20°F to 250°F), intermittent service at 121°C (250°F) and continuous service at 107°C (225°F). Recommended for hot water not to exceed the temperature ratings above, plus a variety of dilute acids, alkalines, and many chemical services. They are not recommended for petroleum oil, strong acid, strong alkaline, or compressed air services.

• Nitrile – For service temperatures from -29°C to 82°C (-20°F to 180°F). Recommended for solvents, oils, water, and hydraulic fluid resistance. They are not recommended for highly polar solvents such as acetone and methyl ethyl ketone, cholrinated hydrocarbons, ozone, or nitro hydrocarbons and some aviation fuels.

• Fluoroelastomer – For service temperatures -7°C to 149°C (+20°F to 300°F). Recommended for oxidising acids, petroleum products, hydraulic fluids, lubricants, and halogenated hydrocarbons.

Model B302 with Lever-Lock Operator

Model B302 with Gear Operator

Model B302 Grooved End Butterfly Valves(Page 1 of 4)


valv

es

vALvES


Model B302 - Gear Operator

Pipe Size Dimensions - mm Inches Approx. Weight

kgLbs.

Nominal mm

Inches

O.D.mm

Inches A B C D E G H

50 60.3 214.9 79.8 194.1 73.4 84.6 139.7 150.1 6.62 2.375 8.46 3.14 7.64 2.89 3.33 5.50 5.91 14.5

65 73.0 219.7 82.6 194.1 87.9 97.8 144.5 150.1 7.02-1⁄2 2.875 8.65 3.25 7.64 3.46 3.85 5.69 5.91 15.5

65 76.1 219.7 82.6 194.1 87.9 97.8 144.5 150.1 7.0– 3.000 8.65 3.25 7.64 3.46 3.85 5.69 5.91 15.5

80 88.9 226.1 89.9 194.1 100.8 97.8 150.9 150.1 7.73 3.500 8.99 3.54 7.64 3.97 3.85 5.94 5.91 17.0

100 114.3 248.7 110.5 194.1 127.8 115.8 203.2 150.1 9.34 4.500 9.79 4.35 7.64 5.03 4.56 8.00 5.91 20.5

125 141.3 236.2 122.9 194.1 159.3 148.8 186.2 150.1 11.35 5.563 9.30 4.84 7.64 6.27 5.86 7.33 5.91 25.0

150 165.1 343.7 150.6 242.1 184.2 148.8 218.7 249.9 15.0– 6.500 13.53 5.93 9.53 7.25 5.86 8.61 9.84 33.0

150 168.3 343.7 150.6 242.1 184.2 148.8 218.7 249.9 15.06 6.625 13.53 5.93 9.53 7.25 5.86 8.61 9.84 33.0

200 219.1 367.5 174.5 242.1 235.0 133.6 242.6 249.9 20.48 8.625 14.47 6.87 9.53 9.25 5.26 9.55 9.84 45.0

250 273.1 418.9 232.9 293.1 285.6 159.8 294.9 457.2 37.610 10.750 16.53 9.17 11.54 11.25 6.29 11.61 18.0 83.0

300 323.9 445.0 258.3 293.1 333.8 165.6 320.0 457.2 45.412 12.750 17.52 10.17 11.54 13.14 6.52 12.60 18.0 100.0

*Endofdiscdoesnotextendbeyondvalvebody.Forinformationonlargersizes,contactGRINNELLMechanicalProducts.

GA

B

DE

C

H



valv

esvALvES

86 www.grinnell.com

Model B302 - Lever Lock Operator


kgLbs.

Nominal mm

Inches

O.D.mm

Inches A B C D E

50 60.3 127.0 79.8 266.7 73.4 84.6 3.02 2.375 5.00 3.14 10.50 2.89 3.33 6.7

65 73.0 131.8 82.6 266.7 87.9 97.8 3.42-1⁄2 2.875 5.19 3.25 10.50 3.46 3.85 7.5

65 76.1 131.8 82.6 266.7 87.9 97.8 3.9– 3.000 5.19 3.25 10.50 3.46 3.85 8.7

80 88.9 138.2 89.9 266.7 100.8 97.8 3.93 3.500 5.44 3.54 10.50 3.97 3.85 8.7

100 114.3 160.8 110.5 266.7 127.8 115.8 5.54 4.500 6.33 4.35 10.50 5.03 4.56 12.2

125 141.3 173.5 122.9 349.3 159.3 148.8 7.85 5.563 6.83 4.84 13.75 6.27 5.86 17.3

150 165.1 206.0 150.6 349.3 184.2 148.8 12.4– 6.500 8.11 5.93 13.75 7.25 5.86 27.4

150 168.3 206.0 150.6 349.3 184.2 148.8 23.46 6.625 8.11 5.93 13.75 7.25 5.86 27.4

200 219.1 229.9 174.5 349.3 235.0 133.6 14.78 8.625 9.05 6.87 13.75 9.25 5.26 32.5

250 273.1 275.8 232.9 349.3 285.6 159.8 31.610 10.750 10.86 9.17 13.75 11.25 6.29 69.6

300 323.9 301.0 258.3 349.3 333.8 165.6 39.912 12.750 11.85 10.17 13.75 13.14 6.52 88.0

*Endofdiscdoesnotextendbeyondvalvebody.Forinformationonlargersizes,contactGRINNELLMechanicalProducts.

C

E

A

B

D



valv

es

vALvES


Torque

Stem ExtensionsStem extensions can be provided to permit remote operation of the valve in any required length. Stem extensions are available in lengths up to 3 metres (10 ft.). The top flange of the extension stem, plug shaft diameter, and distance across the flats on the plug shaft are the same size as the valve selected. This design allows interchangeability of gear operators, actuators, and adapter bushings from the valve mounting flange to the extension stem top flange.

Adjustable Sprocket RimThe Babbitt Adjustable Sprocket Rim provides for remote operation of the butterfly valves in high, out-of-reach locations. Specify the sprocket number size, and chain length. (Chain length = Height x 0.6m + 0.6m).

MATERIAL LIST

Part Material

1. Plug Steel

2. Top Flange Bushing Bronze

3. Top Flange Steel

4. Housing (Steel Pipe) Steel

5. Plug and Rod Coupling Steel

6. Rod Steel

7. Rod and Stem Coupling Steel

8. Bottom Flange Steel

Pipe SizeTorque

N - m,Lbs - In.Nominal

mmInches

O.D.mm

Inches

690 kPa 100 psi

1379 kPa 200 psi

2068 kPa 300 psi

50 60.3 5.42 7.56 9.382 2.375 48 67 83

65 73.0 5.42 7.56 9.382-1⁄2 2.875 48 67 83

80 88.9 11.25 15.13 18.983 3.500 100 134 168

100 114.3 20.88 16.20 35.814 4.500 185 251 317

125 141.3 33.21 46.31 56.375 5.563 294 410 499

150 168.3 58.71 79.65 100.556 6.625 520 705 890

200 219.1 120.88 168.90 203.148 8.625 1,070 1,495 1,798

250 273.0 175.12 250.15 299.8510 10.750 1,550 2,214 2,654

300 323.9 242.91 341.66 413.7412 12.750 2,150 3,024 3,662


Torque is the rotary effort required to operate a valve. This turning force in a butterfly valve is determined by three factors:

• Friction of the disc to seat for sealing • Bearing friction • Dynamic torque

Breakaway Torque is the total of the torques resulting from bearing friction and seat/disc interference friction at a given pressure differential. This value is normally the highest required torque to operate a valve, and is used in sizing actuators. The torques listed are valid for water and lubricating fluids at ambient temperature. For dry and non-lubricating fluids, contact a GRINNELL Mechanical Products representative.

Butterfly valves, sizes 200mm (8") and larger, when used on liquids, show a marked increase in dynamic torque, which tends to close the valve. For this reason, gear operated or actuated valves are recommended.

The torque listed is for EPDM. When calculating torques for Buna-N or Fluoroelastomer, multiply listed torque by 1.25.

Performance

123

4

5

6

7

8

Valve

Customer Specified Length

B

A

C

Model B302 Grooved End Butterfly Valves - options(Page 4 of 4)


2" 3" 6" 8"2 /2"

1000

0

5000

4000

3000

2000

1000500

400

300

200

1005040302010

0.1

0.2

0.3

0.50.4

1

2

3

45

4" 10"

12"

3000

0

2000

0

FLOW RATE (GPM)

PR

ES

SU

RE

DR

OP

IN P

SI

1

5"

valv

esvALvES

88 www.grinnell.com

E

GA

H

B

D

C

J

Pipe Size Dimensions - mm Inches Approx.Weight

kglbs

Nominal mm

Inches

O.D.mm

Inches A B C D E F

350 355.6 590.6 273.1 254.0 533.4 331.7 387.4 171.814 14.000 23.25 10.75 10.00 21.00 13.06 15.25 378.0

400 406.4 628.7 317.5 254.0 596.9 364.0 425.5 205.516 16.000 24.75 12.50 10.00 23.50 14.33 16.75 452.0

450 457.2 654.1 355.6 254.0 635.0 391.2 450.9 249.118 18.000 25.75 14.00 10.00 25.00 15.40 17.75 548.0

500 508.0 692.2 381.0 254.0 698.5 416.1 463.6 330.920 20.000 27.25 15.00 10.00 27.50 16.38 18.25 728.0

600 609.6 765.0 425.5 260.4 812.8 463.8 536.4 498.624 24.000 30.12 16.75 10.25 32.00 18.26 21.12 1097.0


The Model 308 Butterfly Valve provides dependable, long-term service and superior control of fluid flow in piping systems. Flow may be from either direction, and the valve may be positioned in any orientation.

The valve is furnished with grooved ends for use with grooved couplings. The body and disc design provides exceptional flow characteristics and low operating torque. The disc has a streamlined profile that optimises flow. The body is lined with an elastomer seat that is reinforced with a phenolic backing ring, reducing seat distortion, and wear.

The Model 308 Butterfly Valve includes a gear operator with adjustable stops at the open and shut positions.

The maximum Working Pressure is 1,034 kPa (150 psi) with 316 S.S. Stem and 1,379 kPa (200 psi) with 416 S.S. Stem. Special order is available upon request: Vacuum Service to 750mm (29.5") Hg.

Model 308 Butterfly Valves(Page 1 of 2)


valv

es

vALvES


2.0

0.4

0.1

0.2

0.3

0.9

0.6

0.5

0.80.7

1.0

3.0

4.0

5.0

50003000 100000700005000030000200007000 10000

10000070000500003000020000 200000 300000

0,200

0,040

0,010

0,020

0,030

0,0900,080

0,100

0,300

0,070

0,060

0,050

0,0090,0080,007

FLOW RATE IN LITRES PER MINUTE (LPM)(1 GPM = 3,785 LPM)

FLOW RATE IN GALLONS PER MINUTE (GPM)

NO

MIN

AL

PR

ES

SU

RE

DR

OP

IN B

AR

(1 P

SI =

0,0

6895

BA

R)

IN P

OU

ND

S P

ER

SQ

UA

RE

INC

H (P

SI)

NO

MIN

AL

PR

ES

SU

RE

DR

OP

24 IN

CH

(DN

600)

20 IN

CH

(DN

500)

18 IN

CH

(DN

450)

16 IN

CH

(DN

400)

14 IN

CH

(DN

350)

Note: For design purposes, a safety factor of 15% to 20% should be applied to the values in the above table.


Body • Cast iron conforming to ASTM A 126, Class B

Body Seat (Liner)• Grade E EPDM, grade T nitrile or fluoroelastomer

Body Coating• Epoxy coated

Disc• Stainless steel conforming to ASTM A 351,

Grade CF8M • Aluminium bronze conforming to ASTM B 148,

C95400 • Ductile iron conforming to ASTM A 536,

Grade 65-45-12

Drive and Bottom Shaft• Stainless steel conforming to ASTM A 582, Type 416

or Stainless steel conforming to ASTM A 276, Type 316

Gear operator • Cast iron housing

upper and Lower Bearings• Reinforced Teflon*

Plug • Cast iron ASTM A 126

Seat Material• Grade E EPDM – For service temperatures from

-40°C to 110°C (-40°F to 230°F). Recommended for water service, dilute acids, alkalies, oil-free air, and many chemical services. They are not recommended for use in petroleum services.

• Grade T Nitrile – For service temperatures from -29°C to 82°C (-20°F to 180°F). Recommended for petroleum products, air with oil vapours, vegetable oils, and mineral oils. They are not recommended for use in hot water services.

Contact GRINNELL Mechanical Products for specific recommendations on seat material.

*TeflonisantrademarkofE.I.Dupont

Model 308 Butterfly Valves(Page 2 of 2)


Performance

valv

esvALvES

90 www.grinnell.com

Model BV835 Ball Valves(Page 1 of 2)

Tech Data Sheet: G380The Model BV835 is furnished with grooved ends and features a handle that accepts a padlock device for locking in either the open or closed position. Flow may be from either direction and the valves may be positioned in any orientation.

Maximum Working Pressure6,895 kPa (1,000 psi) 50mm – 80mm (2" – 3")5,516 kPa (800 psi) 100mm (4")4,137 kPa (600 psi) 150mm (6")

Shell Test1.5 times WOG x 60 seconds, hydrostatic, at ambient temperature

Seat Test551.6 kPa (80 psi) x 60 seconds, pneumatic

Pipe Size Operating Torque *

N-m Lbs - in

Dimensions - mm Inches Approx.Weight

kgLbs.

Nominal mm

Inches

O.D.mm

Inches A B C D

40 48.3 7 130 86 178 32 2.21-1⁄2 1.900 62 5.12 3.39 7.00 1.25 4.8

50 60.3 17 140 95 178 38 2.9 2 2.375 150 5.50 3.75 7.00 1.50 6.4

65 73.0 21 159 132 265 50 4.8 2-1⁄2 2.875 186 6.25 5.20 10.43 2.00 10.6

65 76.1 21 159 132 265 50 4.8– 3.000 186 6.25 5.20 10.43 2.00 10.6

80 88.9 28 167 143 265 63 6.1 3 3.500 248 6.56 5.63 10.43 2.50 13.4

100 114.3 45 240 94 265 90 25.04 4.500 398 9.45 3.70 10.43 3.50 55.0

150 165.1 60 258 221 600 125 36.0– 6.500 531 10.15 8.70 23.60 4.92 79.2

150 168.3 60 258 221 600 125 36.06 6.625 531 10.15 8.70 23.60 4.92 79.2

*Forthefirstopeningorclosingofthevalvewhenthevalveisnotcontinuouslyoperated,anadditionaltorqueof2.0–2.5timesthelistedoperatingtorqueisnormallyrequired.


Model BV835 Ball Valves provide for efficient control of fluid in piping systems. Flow may be from either direction, and the valves may be positioned in any orientation. The valves are furnished with grooved ends for use with GRINNELL grooved couplings. The handle is provided with a device for padlocking in either the open or closed position.


• Ductile iron conforming to ASTM A 536, Grade 65-45-12

Body Coating• Black enamel

Ball• Type 304 Stainless Steel

Body Seal• R-PTFE

Seats• Virgin TFE

o-Ring• Fluoroelastomer (Viton)

Stem• Carbon steel, nickel-plated,

- Type 304 Stainless Steel available

Lever Handle• Carbon steel, zinc plated with plastic grip,

- Type 304 Stainless Steel available

Gear operator• Manual with handwheel, cast iron body

C

A

B

D

valv

es

vALvES


Model BV835 Ball Valves(Page 2 of 2)


Pressure Performance

Flow Data - Cv Values

Pipe Size Dimensions - mm Inches Approx.Weight

kgLbs.

Nominal mm

Inches

O.D.mm

Inches A B C D E

40 48.3 130 124 203 32 152 7.01-1⁄2 1.900 5.12 4.88 8 1.25 6 15.0

50 60.3 140 137 203 38 152 8.02 2.375 5.50 5.38 8 1.50 6 18.0

65 73.0 159 145 203 50 152 10.02-1⁄2 2.875 6.25 5.68 8 2.00 6 22.0

65 76.1 159 145 203 50 152 10.0– 3.000 6.25 5.68 8 2.00 6 22.0

80 88.9 167 182 203 63 152 14.03 3.500 6.56 7.16 8 2.50 6 31.0

100 114.3 240 203 203 90 152 33.04 4.500 9.45 8.00 8 3.50 6 73.0

150 165.1 258 277 356 125 305 56.0– 6.500 10.15 10.89 14 4.92 12 123.4

150 168.3 258 277 356 125 305 56.06 6.625 10.15 10.89 14 4.92 12 123.4


Pipe SizeCv

ValueNominal

mmInches

O.D.mm

Inches

40 48.3130

1-1⁄2 1.900

50 60.3 180

2 2.375

65 73.0 320

2-1⁄2 2.875

65 76.1320

– 3.000

80 88.9600

3 3.500

100 114.31020

4 4.500

150 165.13300

– 6.500

150 168.33300

6 6.625

00

2,000

4,000

6,000

8,000

10,000

50 100

Temperature (C°)

Pres

sure

(kPa

)

200 250

Values for flow of water at 16°C (60°F)

Cv =Q∆P

Where: Cv = Flow coefficient Q = Flow (GPM) ∆P = Pressure drop (psi)

General Notes

•PressureratingslistedareCWP(coldwaterpressure)ormaximumworkingpressurewithintheservicetemperaturerangeofthegasketusedinthecoupling.Foradditionalinformation,contactGRINNELLMechanicalProducts.

•MaximumworkingpressuresandendloadslistedaretotalofinternalandexternalpressuresandloadsbasedonSchedule40steelpipewithrollgroovestoANSI/AWWAC606-04specifications.Forinformationonotherpipeschedules,contactGRINNELLMechanicalProducts.

•Warning:Pipingsystemsmustalwaysbedepressurizedanddrainedbeforeattemptingdisassemblyand/orremovalofanycomponents.

C

E

B

D

A

valv

esvALvES

92 www.grinnell.com

Model 590 Grooved End Check Valves(Page 1 of 2)


MATERIAL SPECIFICATIoNSDuctile Iron Body & Cap Specifications





Seat• Nickel

Coating•Non-Lead paint

Performance

Seal Specifications• Grade “E” EPDM seals have a green colour code

identification and conform to ASTM D 2000 for service temperatures from -34°C to 110°C (-30°F to 230°F). They are recommended for hot water not to exceed 110°C (230°F), plus a variety of dilute acids, oil free air, and many chemical services. They are not recommended for petroleum services.

• Grade “T” Nitrile seals have an orange colour code identification and conform to ASTM D 2000 for service temperatures from -29°C to 82°C (-20°F to 180°F). They are recommended for petroleum products, vegetable oils, mineral oils, and air with oil vapours.

GRINNELL Model 590 Check Valves are capable of pressures up to 2,068 kPa (300 psi). These valves are designed as compact and rugged swing-type units that allow water flow in one direction and prevent flow in the opposite direction. They are manufactured with a ductile iron body, nickel seat, and a stainless steel clapper assembly for sizes 50mm – 200mm (2" – 8"), and a ductile iron clapper assembly for sizes 250mm – 300mm (10" – 12"). A resilient elastomer seal facing on the spring loaded clapper ensures a leak tight seal and a non-sticking operation. The Model 590 Check Valve is designed to minimise water hammer caused by flow reversal.

The valves are furnished with grooved ends and can be installed using GRINNELL Couplings. The Model 590 can be installed with GRINNELL Figure 71 Flange Adapters or ANSI class 300 Flange Adapters. All Model 590 Check Valves are designed with a removable cover for ease during field maintenance.

0,04

0,05

0,07

0,06

0,090,08

0,10

0,20

0,30

IN P

OU

ND

S P

ER

SQ

UA

RE

INC

H (P

SI)

NO

MIN

AL

PR

ES

SU

RE

DR

OP

NO

MIN

AL

PR

ES

SU

RE

DR

OP

IN B

AR

(1 P

SI =

0,0

6895

BA

R)

0.5

0.6

1.00.90.80.7

4.0

2.0

3.0

5.0

200 300 400 600 1000 2000 3000 4000 6000 10000

700 1000 2000 3000 5000 7000 10000 20000 30000

15000

50000

100

500

FLOW RATE IN LITRES PER MINUTE (LPM)(1 GPM = 3,785 LPM)

FLOW RATE IN GALLONS PER MINUTE (GPM)

2-1/

2 IN

CH

(DN

65)

3 IN

CH

(DN

80)

5 IN

CH

(DN

125)

8 IN

CH

(DN

200)

6 IN

CH

(DN

150)

4 IN

CH

(DN

100)

10 IN

CH

(DN

250)

2 IN

CH

(DN

50)

12 IN

CH

(DN

300)

valv

es

vALvES


Pipe Size Dimensions - mm Inches CoverBolt Torq.

NmLb.-ft.

Approx.Weight

kgLbs.

Nominal mm

Inches

O.D.mm

Inches A B C D E

50 60.3 171.5 111.3 64.8 65.3 82.3 21 4.52 2.375 6.75 4.38 2.55 2.57 3.25 15 9.0

65 73.0 203.2 136.7 86.6 78.5 98.6 54 4.52-1⁄2 2.875 8.00 5.42 3.41 3.09 3.88 39 10.0

65 76.1 203.2 136.7 86.6 78.5 98.6 54 4.5– 3.000 8.00 5.42 3.41 3.09 3.88 39 10.0

80 88.9 212.9 146.3 91.4 84.1 98.6 54 5.03 3.500 8.38 5.76 3.60 3.31 3.88 39 11.0

100 114.3 245.6 171.2 117.1 92.2 115.4 54 11.34 4.500 9.63 6.74 4.61 3.63 4.53 39 25.0

125 139.7 266.7 190.5 134.4 104.9 124.5 54 13.2– 5.500 10.50 7.50 5.29 4.13 4.90 39 29.0

125 141.3 266.7 190.5 134.4 104.9 124.5 54 13.25 5.563 10.50 7.50 5.29 4.13 4.90 39 29.0

150 165.1 292.1 204.4 146.1 114.3 127.0 82 21.3– 6.500 11.50 8.05 5.75 4.50 5.00 60 47.0

150 168.3 292.1 204.4 146.1 114.3 127.0 82 21.36 6.625 11.50 8.05 5.75 4.50 5.00 60 47.0

200 219.1 355.6 260.4 196.9 142.7 138.4 164 30.08 8.625 14.00 10.25 7.75 5.62 5.45 120 66.0

250 273.1 457.2 330.2 259.3 162.1 190.5 164 49.410 10.750 18.00 13.00 10.21 6.38 7.50 120 109.7

300 323.9 533.4 362.7 287.2 184.4 193.5 164 68.012 12.750 21.0 14.28 11.31 7.26 7.62 120 151.0


B A

C

D

E

HORIZONTAL ORIENTATIONVERTICAL ORIENTATION

FLOW

FLOW

COVER

COVEROUTLET

INLET

OUTLETINLET

Model 590 Grooved End Check Valves(Page 2 of 2)


valv

esvALvES

94 www.grinnell.com

Model TD830 Triple Duty ValvesTech Data Sheet: G390

The Model TD830 Triple Duty Valve is designed for installation in pump discharge piping where it functions as a spring-loaded silent check valve, a balancing valve, and a shut-off valve.

The Model TD830 Triple Duty Valve operates automatically and quietly. Line pressure of approximately 1.7 kPa (0.25 psi) opens the disc. To prevent flow reversal and water hammer, the spring closes the disc as the line flow approaches zero in order. The flow through the valve can be adjusted from bubble tight shut-off to full-flow by the threaded rising stem.


kgLbs.

Nominal mm

Inches

O.D.mm

Inches A

BOPEN

CNPT

50 60.3 238.1 244.5 15 10.02 2.375 9.38 9.63 1⁄2 23.065 73.0 260.4 244.5 15 10.9

2-1⁄2 2.875 10.25 9.63 1⁄2 24.080 88.9 285.8 257.2 15 15.03 3.500 11.25 10.13 1⁄2 33.0

100 114.3 397.9 320.8 15 38.04 4.500 15.63 12.63 1⁄2 84.0

125 141.3 397.9 282.6 15 38.05 5.563 15.625 11.125 1⁄2 84.0

150 168.3 498.5 444.5 20 70.06 6.625 19.63 17.50 3⁄4 156.0

200 219.1 600.0 457.2 20 136.08 8.625 23.63 18.00 3⁄4 300.0

250 273.1 711.2 552.5 25 178.010 10.750 28.00 21.75 1 392.0300 323.9 803.3 635.0 25 225.012 12.750 31.63 25.00 1 496.0

340 355.6 851.0 635.0 25 358.314 14.000 33.50 25.000 1 790.0


A

B

C

The Model TD830 Triple Duty Valve can be installed quickly into grooved end piping systems using two GRINNELL Couplings. The externally guided disc has a soft seat to ensure a leak-tight seal. It lifts 8mm ( 1/3") for each 25.4mm (1") of pipe diameter. The rising stem design incorporates a graduated position indicator to ensure accurate disc positioning for throttling service.

The yoke and valve stem are unwetted external parts so they cannot be corroded or eroded by the line fluid. All mating threaded parts are made of dissimilar, non-galling metals. An NPT drain plug is provided, as well as bosses for gauge taps at the inlet and outlet.

Maximum working pressure is 4,413 kPa (640 psi) at 38°C (100°F) and 3,896 kPa (565 psi) at 149°C (300°F).Note:Pressureandtemperaturecanbelimitedbygasketmaterial.ContactGRINNELLMechanicalProducts.

MATERIAL SPECIFICATIoNSBody & Yoke

• Ductile iron conforming to ASTM A 395, Grade 60-40-18 or A 536

Disc• Aluminum bronze ASTM B 142, C 950

Disc Guide & Flanged Gland• Cast iron conforming to ASTM A 126-B

Spring• 302 stainless steel

Stem• Type 316 stainless steel

Stem Guide• Ductile iron conforming to ASTM A 536 or A 395

o-Rings• EPDM

Seat• Bronze

Seat Guide• Bronze conforming to ASTM B 584 (81-3-7-9)

Finish• Black paint

Performance• Pressure Drop, contact GRINNELL Mechanical Products.

CirC

uit B

alan

CinG

valv

esCiRCuiT BALANCiNG vALvES

96 www.grinnell.com

GRINNELL Model CB800 Circuit Balancing Valves are designed to achieve accurate and efficient balancing of hydronic heating or cooling systems. Circuit Balancing Valves provide superior accuracy in measuring flows rather than ball type circuit setters.

The CB800 valve serves 5 functions:

• Throttling• Measuring differential pressure• Draining• Filling• Positive shutoff

These valves are rated at 2,068 kPa (300 psi) at 150°C (300°F).

The valve is made of dezincification-resistant brass and bronze components. Threaded and solder connections are available for sizes 15mm – 50mm (½" – 2") sizes with bronze bodies. Flanged (125#) and grooved connections are available for sizes 65mm – 300mm (2½" – 12") with cast iron bodies.

The Y-Pattern style provides low pressure drop. The globe style valve allows for precise throttling. The easy-to-adjust digital/vernier handwheel provides a minimum of 70 unique handwheel positions. The handwheel and test ports are located on one side for easy access. A built-in memory stop ensures the setting can be returned to a balanced position after shutoff. The self-sealing pressure/temperature test ports use standard insertion probes to eliminate additional components.

The GRINNELL Circuit Balancing Valve is installed with flow in the direction of the arrow, and may be in the horizontal or vertical position. The handwheel can be positioned up or down, or on either side.

Model CB800Grooved

Balancing ValvesPage – 98

Model CB800Threaded

Balancing ValvesPage 98

Model CB800Flanged

Balancing Valves ANSI & PN16/PN10

Page 99

Model CB800MC2 Computer

Page 100

Model CB800Insulation Kits

Page 100

Circuit Balancing Valves Pictorial Table of Contents

CirC

uit B

alan

CinG

valv

es

CiRCuiT BALANCiNG vALvES


CB800 Circuit Balancing ValvesTech Data Sheet: G450


• Sizes 15mm – 50mm (½" – 2") solder or NPT threaded connection: brass-resistant to dezincification (DZR)

• Sizes 65mm – 300mm (2½" – 12"), grooved or flanged connection: Cast Iron conforming to ASME ANSI B16.5

Valve Stem & Disc• Brass resistant to dezincification (DZR)

o Ring• EPDM E

Handwheel• Thermoplastic

For accessories and replacement parts contact GRINNELL Mechanical Products for details.

Valve SizingAll balancing valves are sized to perform in a normal operation range between 25% and 100% of the full open position, at a minimum differential pressure between 0.3m – 0.9m (1 – 3 ft.) of water. It is recommended that for improved accuracy, the valve is set to open 70%+.

When maximum flow is known but a pressure drop through the balancing valve is unknown, select a balancing valve for a maximum pressure drop of 0.6m (2 ft.) water 5.7 kPa (0.8 psi) in the full open position as shown in the table to the right.

Accurate flow measurement requires that the velocity distribution near the balancing valve remains constant, regardless of the total flow through the pipe. Fittings, such as elbows and tees, disturb the normal flow profile which is established through straight pipe. Pumps create even greater disturbances. Failure to allow water flows around fittings and pumps to normilise can affect measuring accuracy by as much as 20% when the valve is in the fully open position. Minimum lengths (diameters, D) of straight pipe before and after the balancing valve prevent these errors.

Valves are designed for vertical, horizontal, or inclined installation.

Sizemm

Inches

Flow RateLPH

GPM

ConnectionType

15 100 - 1000

Thread

½ 0.5 - 4.120 1.0k – 1.5k¾ 4.1 – 6.125 1.5k – 2.3k1 6.1 – 9.232 2.3k – 5.0k

1-1⁄4 9.2 – 2040 5.0k – 7.2k

1-1⁄2 20 – 2950 7.2k – 10k2 29 – 4065 10k - 25k

Flanged or Grooved

2-1⁄2 40 – 10280 25k – 31k3 102 – 125

100 31k – 50k4 125 – 210

125 50k – 76k5 210 – 300

150 76k – 108k6 300 – 430

200 108k – 190k8 430 – 760

250 190k – 340k10 760 – 1350300 340k – 377k12 1350 -1500

Minimum Pipe Diameters from Fittings

3D 2D Pump 10D 2D

CirC

uit B

alan

CinG

valv


98 www.grinnell.com


kgLbs.

LimitsPN/°CPSI/°F

Handwheel Turns

Nominal mm

Inches

O.D.mm

Inches L H

65 73.0 290.6 187.5 8.5 16/1508

2-1⁄2 2.875 11.44 7.38 18.7 300/300

80 88.9 311.2 203.2 12.5 16/1508

3 3.500 12.25 8.00 27.5 300/300

100 114.3 349.3 239.8 20.5 16/1508

4 4.500 13.75 9.44 45.1 300/300

125 141.3 400.0 282.7 32.0 16/1508

5 5.563 15.75 11.13 70.4 300/300

150 168.3 479.6 285.8 43.5 16/1508

6 6.625 18.88 11.25 95.7 300/300

200 219.1 600.2 468.4 116.0 16/15012

8 8.625 23.63 18.44 255.2 300/300

250 273.1 730.3 479.6 171.0 16/15012

10 10.750 28.75 18.88 376.2 300/300

300 323.9 849.4 514.4 136.0 16/15012

12 12.750 33.44 20.25 519.2 300/300

Forinformationonlargersizes,contactGRINNELLMechanicalProducts.Seecircuitbalancingvalvespecificationsonpages96-97.

OD

L

H


kgLbs.

Limits PN/°CPSI/°F

Handwheel Turns

Nominal mm

Inches

O.D.mm

Inches L H

15 21.3 79.5 104.9 0.6 16/15071⁄2 0.840 3.13 4.13 1.4 235/300

20 26.7 84.1 115.8 0.6 16/1507

3⁄4 1.050 3.31 4.56 1.4 235/300

25 33.7 85.6 119.1 1.0 16/1507

1 1.315 3.38 4.69 2.2 235/300

32 42.4 111.3 136.7 1.4 16/15010

1-1⁄4 1.660 4.38 5.38 3.0 235/300

40 48.3 120.7 138.2 1.7 16/15010

1-1⁄2 1.900 4.75 5.44 3.9 235/300

50 60.3 150.9 147.6 2.6 16/15010

2 2.375 5.94 5.81 5.6 235/300


L

H

Model CB800 Circuit Balancing Valves Grooved EndsTech Data Sheet: G450

Model CB800 Circuit Balancing Valves Threaded EndsTech Data Sheet: G450

CirC

uit B

alan

CinG

valv

es

CiRCuiT BALANCiNG vALvES


H

D

L

H

D

L


kgLbs.


Handwheel Turns

Nominal mm

Inches

O.D.mm

Inches L H D

65 73.0 290 188 185 13.5 16/1508

2-1⁄2 2.875 11.4 7.4 7.3 18.7 235/300

80 88.9 310 203 200 18.0 16/1508

3 3.500 12.2 8.0 7.9 39.6 235/300

100 114.3 350 240 220 28.0 16/1508

4 4.500 13.8 9.4 8.7 61.6 235/300

125 141.3 400 283 250 40.5 16/1508

5 5.563 15.7 11.1 9.8 89.1 235/300

150 168.3 480 285 285 51.5 16/1508

6 6.625 18.9 11.2 11.2 113.3 235/300

200 219.1 600 467 340 129.5 16/15012

8 8.625 23.6 18.4 13.4 284.9 235/300

250 273.1 730 480 405 196.0 16/15012

10 10.750 28.7 18.9 15.9 431.2 235/300

300 323.9 850 515 485 264.0 16/15012

12 12.750 33.5 20.3 19.1 580.8 235/300



kgLbs.


Handwheel Turns

Nominal mm

Inches

O.D.mm

Inches L H D

65 73.0 290 188 185 13.5 16/1508

2-1⁄2 2.875 11.4 7.4 7.3 18.7 235/30080 88.9 310 203 200 18.0 16/150

83 3.500 12.2 8.0 7.9 39.6 235/300

100 114.3 350 240 220 28.0 16/1508

4 4.500 13.8 9.4 8.7 61.6 235/300125 141.3 400 283 250 40.5 16/150

85 5.563 15.7 11.1 9.8 89.1 235/300

150 168.3 480 285 285 51.5 16/1508

6 6.625 18.9 11.2 11.2 113.3 235/300200 219.1 600 467 340 129.5 16/150

128 8.625 23.6 18.4 13.4 284.9 235/300

250 273.1 730 480 405 196.0 16/15012

10 10.750 28.7 18.9 15.9 431.2 235/300300 323.9 850 515 460 264.0 16/150

1212 12.750 33.5 20.3 18.1 580.8 235/300


Model CB800 Circuit Balancing Valves Flanged Ends, ANSI Class 125#


Model CB800 Circuit Balancing Valves Flanged Ends, PN16/PN10


CirC

uit B

alan

CinG

valv


100 www.grinnell.com

Model CB800 Circuit Balancing Valves MC2 Measuring ComputerTech Data Sheet: G450 The GRINNELL Model MC2 computer is a hand-held

computer-balancing instrument designed to measure the flow in GRINNELL Balancing Valves from 15mm – 300mm ( 1⁄2" – 12"). The MC2 computer:

• Automatically calculates the flow rate for a valve.• Measures differential pressure and temperature. • Compares the actual and nominal flow values. • Displays the required presetting value.

All results may be saved in the hand-held computer and can be downloaded to a PC at a later time.

The easy-to-operate touch button keypad protects against water and dirt particles. The hand-held computer is supplied with a rechargeable power pact. All parts of the hand-held computer are stored in a convenient carrying case.

The insulation shells have a CFC-free inner core made of polyurethane foam with a 1.5mm plastic coat. It consists of two double shells which are tightened by two metal straps.

Available for sizes 20mm – 200mm ( 3⁄4" – 8"). Specify size and end-connection type.

H

D

H

D

L

L

Pipe Size Dimensions - mm Inches

Nominal mm

Inches

O.D.mm

Inches D H L

20 26.7 145 280 2703⁄4 1.050 5.7 11.0 10.625 33.7 155 280 2701 1.315 6.1 11.0 10.632 42.4 180 310 310

1-1⁄4 1.660 7.1 12.2 12.240 48.3 200 340 330

1-1⁄2 1.900 7.9 13.4 13.050 60.3 220 370 4002 2.375 8.7 14.6 15.765 73.0 260 410 505

2-1⁄2 2.875 10.2 16.1 19.980 88.9 280 415 5303 3.500 11.0 16.3 20.9

100 114.3 320 520 5804 4.500 12.6 20.5 22.8

125 141.3 360 560 6205 5.563 14.2 22.1 24.4

150 168.3 400 600 7306 6.625 15.7 23.6 28.7

200 219.1 450 760 8008 8.625 17.6 30.0 31.5


Model CB800 Circuit Balancing Valves Insulation KitsTech Data Sheet: G450

aCCe

ssor

ies

ACCESSORiES


GRINNELL accessories are designed to provide protection for piping system mechanical equipment. The suction diffusers and strainers reduce maintenance time and labour and allow easy access to the piping system.Figure S853

"Y" StrainersPage – 103

Figure S855Tee Strainers

Pages – 104 - 105

Figure S810Suction Diffusers

Page – 106

Figure 7550Grooved Expansion Joints

Page – 107

Accessories Pictorial Table of Contents

aCCe

ssor

ies

ACCESSORiES


Figure S853 “Y” StrainersTech Data Sheet: G420

A

B

D

(NPT)C

The Figure S853 “Y” Strainer is rated for 4,413 kPa (640 psi) at 38°C (100°F) and 1,034 kPa (150 psi) at 296°C (565°F). The “Y” Strainer provides economical strainer protection for piping equipment such as pumps, meters, valves, compressors, and traps. The inlet and outlet ends are suitable for installation with Figure 705, 707, and 772 Couplings.

The Figure S853 “Y” Strainer screen has the following standard perforations:

• Sizes 50mm – 100mm (2" – 4") = 1.6mm ( 1⁄16")

• Sizes 125mm – 300mm (5" – 12") = 3.2mm ( 1⁄8")

All covers have an NPT blow-off outlet (pipe plugs not included) and recessed seat in the cover to ensure screen alignment.

Self-cleaning occurs by opening the valve (not supplied) connected to the blow-off outlet. Indicate when ordering strainers that are mounted in vertical piping so that the cover will be rotated to position the blow-off at the lowest point.

Note:Pressureandtemperaturecanbelimitedbygasketmaterial.ContactGRINNELLMechanicalProducts.

MATERIAL SPECIFICATIoNSDuctile Iron Body & Cover Specifications

• ASTM A 536, Grade 65-45-12 – Standard specification for ductile iron castings




Screen• Type 304 Stainless Steel ASTM A 240.

(Other alloys are available, contact GRINNELL Mechanical Products)

Gasket• Non-asbestos

Coating• Black enamel paint

Performance• Pressure Drop, contact GRINNELL

Mechanical Products.


kgLbs.

Nominal mm

Inches

O.D.mm

Inches A B C*

D Screen

Removal50 60.3 200.2 133.4 12.7 177.8 5.42 2.375 7.88 5.25 0.50 7.00 12.0

65 73.0 254.0 165.1 25.4 247.7 8.22-1⁄2 2.875 10.00 6.50 1.00 9.75 18.0

80 88.9 257.3 177.8 25.4 254.0 10.43 3.500 10.13 7.00 1.00 10.00 23.0

100 114.3 308.1 209.6 38.1 304.8 19.14 4.500 12.13 8.25 1.50 12.00 42.0

125 141.3 397.0 285.8 50.8 431.8 36.35 5.563 15.63 11.25 2.00 17.00 80.0

150 168.3 469.9 342.9 50.8 508.0 50.86 6.625 18.50 13.50 2.00 20.00 112.0

200 219.1 549.4 393.7 50.8 577.9 93.08 8.625 21.63 15.50 2.00 22.75 205.0

250 273.1 739.8 489.0 50.8 743.0 125.610 10.750 29.13 19.25 2.00 29.25 277.0

300 323.9 857.3 581.0 50.8 895.4 213.212 12.750 33.75 22.88 2.00 35.24 470.0

* Blow-offoutletthreadsconformingtoBSPTareavailableuponrequest.ContactGRINNELLMechanicalProducts.


aCCe

ssor

ies

ACCESSORiES


Figure S810 Suction Diffusers(Page 1 of 2)

Tech Data Sheet: G410The Figure S810 Suction Diffuser is compact and rugged for direct mounting to the suction side of a pump in either a horizontal or vertical position. In addition to removing foreign particles, this diffuser also provides proper flow conditions to the pump. Where space is limited, this diffuser can be used to replace the straight pipe normally required to reduce turbulence.

The Figure S810 Suction Diffuser’s permanent perforated stainless steel screen helps remove foreign particles. The inlet end is suitable for installation with GRINNELL Couplings. The outlet end is provided with a 150# ANSI flat face flange. Integral straightening vanes in the diffuser outlet reduce turbulence so that stress and erosion on the pump is minimised.

Maximum working pressure is 2,068 kPa (300 psi) at 38°C (100°F) and 1,138 kPa (165 psi) at 149°C (300°F).

Note:PressureandtemperaturecanbelimitedbyO-ringmaterial.ContactGRINNELLMechanicalProducts.

A F

D

B

H

E

G

C


kgLbs.

Nominal mm

Inches

O.D.mm

Inches A B C D E

F Screen

Removal

G Plug NPT

H Pipe

Support ID50 x 50 60.3 x 60.3 114.3 114.3 169.9 155.7 258.8 223.8 20 20.9 8.62 x 2 2.375 x 2.375 4.50 4.50 6.69 6.13 10.19 8.81 0.75 0.824 19

65 x 50 73.0 x 60.3 127.0 127.0 190.5 166.6 276.4 231.9 20 35.1 9.12-1⁄2 x 2 2.875 x 2.375 5.00 5.00 7.50 6.56 10.88 9.13 0.75 1.38 2065 x 65 73.0 x 73.0 127.0 127.0 190.5 166.6 276.4 231.9 20 35.1 10.0

2-1⁄2 x 2-1⁄2 2.875 x 2.875 5.00 5.00 7.50 6.56 10.88 9.13 0.75 1.38 2280 x 50 88.9 x 60.3 139.7 139.7 214.4 187.5 293.6 244.6 20 35.1 17.23 x 2 3.500 x 2.375 5.50 5.50 8.44 7.38 11.56 9.63 0.75 1.38 38.0

80 x 65 88.9 x 73.0 139.7 139.7 214.4 187.5 293.6 244.6 20 35.1 17.73 x 2-1⁄2 3.500 x 2.875 5.50 5.50 8.44 7.38 11.56 9.63 0.75 1.38 39.0

MATERIAL SPECIFICATIoNSBody and Cover

• Ductile iron conforming to ASTM A 126B

Knobs• Ductile iron conforming to ASTM A 536, Grade

65-45-12 for sizes 80mm x 50mm thru 250mm x 200mm (3" x 2" thru 10" x 8")Stud/nuts carbon steel conforming to ASTM A 193-4, for sizes 250mm x 250mm (10" x 10") and larger

Screen• 4.0mm ( 5 ⁄32") perforated type 304 stainless steel for

sizes 80mm x 50mm thru 150mm x 150mm (3" x 2" thru 6" x 6");

• 3.2mm ( 1 ⁄8") perforated type 304 stainless steel for sizes 200 x 125mm (8" x 5") and larger

• Sleeve is 20 mesh type 304 stainless steel

Coating• Black enamel paint



aCCe

ssor

ies

ACCESSORiES



kgLbs.

Nominal mm

Inches

O.D.mm

Inches A B C D E

F Screen

Removal

G Plug NPT

H Pipe

Support ID80 x 80 88.9 x 88.9 139.7 139.7 214.4 187.5 293.6 244.6 20 35.1 18.13 x 3 3.500 x 3.500 5.50 5.50 8.44 7.38 11.56 9.63 0.75 1.38 40.0

100 x 50 114.3 x 60.3 146.1 146.1 231.9 193.8 300.0 284.0 20 35.1 21.84 x 2 4.500 x 2.375 5.75 5.75 9.13 7.63 11.81 11.18 0.75 1.38 48.0

100 x 65 114.3 x 73.0 165.1 165.1 266.2 222.3 333.5 244.6 25 35.1 22.24 x 2-1⁄2 4.500 x 2.875 6.50 6.50 10.48 8.75 13.13 9.63 1.00 1.38 49.0100 x 80 114.3 x 88.9 165.1 173.0 265.2 222.3 333.5 292.1 25 35.1 22.7

4 x 3 4.500 x 3.500 6.50 6.81 10.44 8.75 13.13 11.50 1.00 1.38 50.0100 x 100 114.3 x 114.3 165.1 173.0 265.2 222.3 333.5 292.1 25 35.1 23.6

4 x 4 4.500 x 4.500 6.50 6.81 10.44 8.75 13.13 11.50 1.00 1.38 52.0125 x 80 141.3 x 88.9 165.1 165.1 266.2 222.3 333.5 292.1 25 35.1 42.6

5 x 3 5.563 x 3.500 6.50 6.50 10.48 8.75 13.13 11.50 1.00 1.38 94.0125 x 100 141.3 x 114.3 165.1 165.1 303.3 254.0 400.1 355.6 25 35.1 43.5

5 x 4 5.563 x 4.500 6.50 6.50 11.94 10.00 15.75 14.00 1.00 1.38 96.0125 x 125 141.3 x 141.3 190.5 190.5 303.3 254.0 400.1 378.0 25 35.1 45.8

5 x 5 5.563 x 5.563 7.50 7.50 11.94 10.00 15.75 14.88 1.00 1.38 101.0150 x 80 168.3 x 88.9 203.2 203.2 338.1 266.7 428.8 420.6 25 35.1 46.7

6 x 3 6.625 x 3.500 8.00 8.00 13.31 10.50 16.88 16.56 1.00 1.38 103.0150 x 100 168.3 x 114.3 203.2 203.2 338.1 266.7 428.8 420.6 25 35.1 48.1

6 x 4 6.625 x 4.500 8.00 8.00 13.31 10.50 16.88 16.56 1.00 1.38 106.0150 x 125 168.3 x 141.3 203.2 203.2 338.1 266.7 428.8 420.6 25 35.1 49.9

6 x 5 6.625 x 5.563 8.00 8.00 13.31 10.50 16.88 16.56 1.00 1.38 110.0150 x 150 168.3 x 168.3 203.2 203.2 338.1 266.7 428.8 420.6 25 35.1 51.2

6 x 6 6.625 x 6.625 8.00 8.00 13.31 10.50 16.88 16.56 1.00 1.38 113.0200 x 125 219.1 x 141.3 228.6 228.6 365.3 292.1 454.2 428.8 25 35.1 61.2

8 x 5 8.625 x 5.563 9.00 9.00 14.38 11.50 17.88 16.88 1.00 1.38 135.0200 x 150 219.1 x 168.3 228.6 254.0 388.9 292.1 454.2 428.8 25 35.1 62.1

8 x 6 8.625 x 6.625 9.00 10.00 15.31 11.50 17.88 16.88 1.00 1.38 137.0200 x 200 219.1 x 219.1 228.6 254.0 414.3 298.5 527.1 581.2 32 35.1 100.7

8 x 8 8.625 x 8.625 9.00 10.00 16.31 11.75 20.75 22.88 1.25 1.38 222.0250 x 150 273.1 x 168.3 240.8 240.8 393.7 303.3 465.1 428.8 32 35.1 104.3

10 x 6 10.750 x 6.625 9.48 9.48 15.50 11.94 18.31 16.88 1.25 1.38 230.0250 x 200 237.1 x 219.1 228.6 298.5 468.4 298.5 527.1 581.2 32 35.1 107.0

10 x 8 10.750 x 8.625 9.00 11.75 18.44 11.75 20.75 22.88 1.25 1.38 236.0250 x 250 273.1 x 273.1 279.4 298.5 508.0 355.6 670.1 781.1 32 35.1 155.610 x 10 10.750 x 10.750 11.00 11.75 20.00 14.00 26.38 30.75 1.25 1.38 343.0

300 x 200 323.9 x 219.1 228.6 228.6 498.6 298.5 527.1 581.2 32 35.1 161.912 x 8 12.000 x 8.625 9.00 9.00 19.63 11.75 20.75 22.88 1.25 1.38 357.0

300 x 250 323.9 x 273.1 279.4 327.2 533.4 355.6 670.1 781.1 32 35.1 161.912 x 10 12.000 x 10.750 11.00 12.88 21.00 14.00 26.38 30.75 1.25 1.38 357.0

300 x 300 323.9 x 323.9 304.8 304.8 560.3 387.4 665.0 781.1 32 35.1 161.912 x 12 12.000 x 12.000 12.00 12.00 22.06 15.25 26.18 30.75 1.25 1.38 357.0

350 x 250 355.6 x 273.1 279.4 279.4 571.5 355.6 670.1 781.1 32 35.1 229.914 x 10 14.000 x 10.750 11.00 11.00 22.50 14.00 26.38 30.75 1.25 1.38 507.0

350 x 300 355.6 x 323.9 304.8 304.8 568.5 387.4 665.0 787.4 32 35.1 272.614 x 12 14.000 x 12.000 12.00 12.00 22.38 15.25 26.18 31.00 1.25 1.38 601.0

350 x 350 355.6 x 355.6 355.6 355.6 635.0 444.5 704.9 841.5 50 35.1 320.214 x 14 14.000 x 14000 14.00 14.00 25.00 17.50 27.75 33.13 2.00 1.38 706.0

400 x 350 406.4 x 355.6 355.6 355.6 660.4 444.5 708.2 787.4 50 35.1 340.116 x 14 16.000 x 14.000 14.00 14.00 26.00 17.50 27.88 31.00 2.00 1.38 750.0


Figure S810 Suction Diffusers(Page 2 of 2)


aCCe

ssor

ies

ACCESSORiES


Figure S855 Tee StrainersTech Data Sheet: G430

The Figure S855 Tee Strainer is rated for the following pressures:

• Sizes 50mm – 125mm (2" – 5"): 5,171 kPa (750 psi) at 38°C (100°F)

• Size 150mm (6"): 4,826 kPa (700 psi) at 38°C (100°F)• Size 200mm (8"): 4,137 kPa (600 psi) at 38°C (100°F)• Size 250mm (10"): 3,447 kPa (500 psi) at 38°C (100°F)• Size 300mm (12"): 2,758 kPa (400 psi) at 38°C (100°F)

The Tee Strainer is designed to remove particles from pipelines where a compact, accessible strainer is needed for the protection of pumps, meters, valves, and similar mechanical equipment. The inlet and outlet ends are suitable for installation with GRINNELL Couplings that provide quick and easy installation.

The cover is secured by a Figure 772 Coupling for easy access to the screen. The cover is tapped and plugged to allow for draining.

The Figure S855 Tee Strainer perforated screen has the following perforations:

• Sizes 50mm – 150mm (2" – 6") = 3.2mm ( 1⁄8")• Sizes 200mm – 300mm (8" – 12") = 4.0mm ( 5⁄32")

Note:Otherperforationsizesareavailableuponrequest.Specifyparticleretentionsizewhenorderingnonstandardscreens.

MATERIAL SPECIFICATIoNSDuctile Iron Body & Cover

• ASTM A 395, Grade 60-40-18 or A 536 – Standard specification for ductile iron castings

• Tensile strength, minimum 448,159 kPa (65,000 psi)• Yield strength, minimum 310,264 kPa (45,000 psi)• Elongation in 50mm (2"), minimum 12%

Screen• 20 gauge type 304 stainless steel ASTM A 240

for Sizes 50mm – 150mm (2" – 6")• 18 gauge type 304 stainless steel ASTM A 240

for Sizes 200mm – 300mm (8" – 12")

Coating• Black enamel paint• Orange – Non-lead paint




kgLbs.

Nominal mm

Inches

O.D.mm

Inches A B

D Screen

Removal50 60.3 165.0 108.0 191.0 2.72 2.375 6.50 4.25 7.50 6.0

65 73.0 191.0 110.0 222.0 5.02-1⁄2 2.875 7.50 4.75 8.75 11.0

80 88.9 216.0 133.0 254.0 5.43 3.500 8.50 5.25 10.00 12.0

100 114.3 254.0 156.0 305.0 9.04 4.500 10.00 6.13 12.00 20.0

125 141.3 279.0 168.0 342.0 13.05 5.563 11.00 6.63 13.50 30.0

150 168.3 330.0 194.0 406.0 18.06 6.625 13.00 7.63 16.00 40.0

200 219.1 394.0 232.0 494.0 36.08 8.625 15.50 9.13 19.44 81.0

250 273.0 457.0 264.0 583.0 57.010 10.750 18.00 10.38 22.94 126.0

300 323.9 508.0 289.0 659.0 79.012 12.750 20.00 11.38 25.94 174.0


A

B

D

aCCe

ssor

ies

ACCESSORiES


GRINNELL Grooved Expansion Joints are custom designed, thermal movement solutions that utilise the proven design characteristics of GRINNELL Flexible Couplings.

The expansion joints are factory fabricated and calibrated to the specific thermal movement conditions of the piping runs. The joints are manufactured from machined grooved nipples and GRINNELL Flexible Couplings, providing dependable, high pressure performance.

Expansion Joints should be anchored and guided in accordance with standard industry practises. Refer to the appropriate coupling data sheet for pressure/temperature ratings and materials of construction.

Nipples are manufactured from standard wall, A 53B black steel pipe.

Figure 7550 Expansion joints are custom designed to your specifications. Contact GRINNELL Mechanical Services for additional information.

Figure 7550 Expansion Joint

aCCe

ssor

ies

ACCESSORiES


stai

nles

s st

eel s

yste

MsSTAiNLESS STEEL SySTEmS


Figure 472Stainless Steel Rigid Couplings

Page – 112

Figure 770High Pressure Rigid Couplings

Page – 113

Figure 405Stainless Steel Flexible

CouplingsPage – 114

Figure 410Stainless Steel 90° Elbows

Page – 115

Figure 401Stainless Steel 45° Elbows

Page – 115

Figure 419Stainless Steel Tees

Page – 116

Figure 460Stainless Steel End Caps

Page – 116

Figure 421Stainless Steel Reducing Tees

Page – 117

Figure 450Stainless Steel Concentric

ReducersPage – 118

Figure 451Stainless Steel Eccentric

ReducersPage – 119

Figure 441Stainless Steel Flange

AdaptersPage – 120

Stainless Steel Systems Pictorial Table of Contents

stai

nles

s st

eel s

yste

Ms

STAiNLESS STEEL SySTEmS


MATERIAL SPECIFICATIoNSStainless Steel Housing Specifications

• Type 316L, ASTM A 743/A 743M – Standard specification for castings, iron-chromium, iron-chromium-nickel, corrosion resistant; for general application Grade CR-8M.



• Elongation in 50mm (2") minimum 30%

Bolt/Nut Specifications• Stainless steel bolts are metric track head bolts

conforming to ASTM A 193M Class 2, Type 316 Grade B8M

• Class 2 stainless steel nuts are heavy hex nuts conforming to ASTM A 194M, Type 316, Grade 8M

• Bolts are coated with an anti-galling agent

Gasket Specifications• Grade “E” EPDM gaskets have a green colour code

identification and conform to ASTM D 2000 for service temperatures from -34°C to 110°C (-30°F to 230°F). They are recommended for hot water not to exceed 110°C (230°F) plus a variety of dilute acids, oil free air, and many chemical services. They are not recommended for petroleum services.

• Grade “EN” EPDM gaskets have a copper colour code identification and are NSF-61 approved for cold and hot portable water up to 82°C (180°F).

• Grade “T” Nitrile gaskets have an orange colour code identification and conform to ASTM D 2000 for service temperatures from -29°C to 82°C (-20°F to 180°F). They are recommended for petroleum products, vegetable oils, mineral oils, and air with oil vapours.

• Grade “o” Fluoroelastomer gaskets have a blue colour code and conform to ASTM D 2000. They are recommended for Oxidising acids, petroleum products, hydraulic fluids, lubricants, and halogenated hydrocarbons.

For local country potable water approvals, contact GRINNELL Mechanical Products

Fitting SpecificationsTech Data Sheet: G570

Coupling Specifications

MATERIAL SPECIFICATIoNS• Fabricated: 304/316L stainless steel conforming to

ASTM A 312, Schedule 10 and Schedule 40

• Full-flow: 304/316L stainless steel conforming to ASTM A 403 WPW or A 403 CR

Fittings are available in full-flow and fabricated versions in 304 and 316L S.S. Fabricated fittings are available with Schedule 10 or Schedule 40 wall thickness.

For pressure ratings of fittings, refer to data sheet G570.

For local country potable water approvals, contact GRINNELL Mechanical Products



stai

nles

s st

eel s

yste



Figure 472 Stainless Steel Rigid CouplingsTech Data Sheet: G560

The Figure 472 Rigid Coupling is made of cast 316L stainless steel and is capable of pressure up to 4,137 kPa (600 psi).

The Figure 472 Patented Coupling universal tongue-and-groove design allows the housing to grip along the full 360° of circumference of the pipe. Sizes 32mm – 100mm (1¼" – 4") have gripping teeth to prevent rotation during installation.

BC

A

Pipe SizeMax.†

PressureskPapsi

Max.†End Load

kNLbs.

Max.*‡ End Gap

mmInches

Dimensions - mm Inches Coupling BoltsApprox.Weight

kgLbs.

Nominal mm

Inches

O.D.mm

Inches A B C Qty.

Size** mm

Inches

32 42.4 4137 5.78 1.5 69.9 111.3 46.02

M10 x 57 0.51-1⁄4 1.660 600 1,298.5 0.06 2.75 4.38 1.81 3⁄8 x 2-1⁄4 1.040 48.3 4137 7.57 2.0 76.2 117.3 46.0

2M10 x 57 0.5

1-1⁄2 1.900 600 1,701.1 0.08 3.00 4.62 1.81 3⁄8 x 2-1⁄4 1.050 60.3 4137 11.82 3.3 86.6 130.0 47.8

2M10 x 57 0.7

2 2.375 600 2,658.0 0.13 3.41 5.12 1.88 3⁄8 x 2-1⁄4 1.565 73.0 4137 17.32 3.3 99.3 143.0 47.8

2M10 x 57 1.1

2-1⁄2 2.875 600 3,895.0 0.13 3.91 5.63 1.88 3⁄8 x 2-1⁄4 2.565 76.1 4137 18.86 3.3 106.4 145.3 50.8

2M10 x 57 1.2

– 3.000 600 4,241.0 0.13 4.19 5.72 2.00 – 2.680 88.9 4137 25.68 3.3 117.6 158.8 47.8

2M12 x 89 1.2

3 3.500 600 5,772.5 0.13 4.63 6.25 1.88 1⁄2 x 3 2.6100 114.3 4137 42.44 4.8 147.6 190.5 50.0

2M12 x 89 1.6

4 4.500 600 9,542.3 0.19 5.81 7.50 1.97 1⁄2 x 3 3.5

125 139.7 4137 63.40 4.8 178.3 246.9 52.32

M16 x 83 3.4– 5.500 600 14,254.6 0.19 7.02 9.72 2.06 – 7.5

125 141.3 4137 64.87 4.8 180.1 246.6 51.82

M16 x 83 3.45 5.563 600 14,583.0 0.19 7.09 9.71 2.04 5⁄8 x 3-1⁄4 7.5

150 168.3 4137 92.00 4.8 205.5 267.5 54.12

M16 x 83 3.46 6.625 600 20,682.4 0.19 8.09 10.53 2.13 5⁄8 x 3-1⁄4 7.6

200 ◗ 219.1 4137 155.92 4.8 268.2 344.4 66.52

M20 x 121 8.28 8.625 600 35,054.7 0.19 10.56 13.56 2.62 3⁄4 x 4-3⁄4 18.0

250 ◗ 273.0 4137 242.22 3.3 326.1 416.8 66.52

M24 x 165 11.210 10.750 600 54,455.9 0.13 12.84 16.41 2.62 1 x 6-1⁄2 24.6

300 ◗ 323.9 4137 340.73 3.3 391.4 478.5 66.52

M24 x 165 19.112 12.750 600 76,603.5 0.13 15.41 18.84 2.62 1 x 6-1⁄2 42.0

Figure472RigidCouplingshaveanAnti-RotationFeatureof“grippingteeth”alongthecouplingkeysinsizes32mm-100mm(11 ⁄4" - 4"),makingtheFigure472perfectlysuitedforinstallationswherethelikelihoodofrotationisgreatest.

* Maximumavailablegapbetweenpipeends.Minimumgap=0.† Maximumpressureandendloadaretotalfromallloadsbasedonstandardweightstainlesssteelpipe.Pressureratingsandendloadsmay

differforotherpipematerialsand/orwallthickness.ContactGRINNELLMechanicalProductsfordetails.‡Maxendgapisforcutgroovedstandardweightstainlesssteelpipe.Valuesforrollgroovedpipewillbehalfthatofcutgrooved.**ContactGRINNELLMechanicalProductsforavailabilityofinchboltsizesvs.metricboltsizes.◗ SizesareavailabletoJISstandards.ContactGRINNELLMechanicalProductsfordetails.Forinformationonlargersizes,contactGRINNELLMechanicalProducts.Seepage111forstainlesssteelcouplingspecifications,andseepages140-146forgasketinformation.

stai

nles

s st

eel s

yste

Ms



Figure 770 High Pressure Rigid CouplingsTech Data Sheet: G138

The Figure 770 High Pressure Rigid Coupling provides a rigid joint by firmly gripping along the full 360° circumference of the pipe grooves. Coupling housings are cast ductile iron to ASTM A 536.

The Figure 770 Rigid Coupling is available with a Grade “EN” EPDM NSF 61 approved tri-seal gasket for potable water applications. It is capable of pressures up to 3,447 kPa (500 psi) depending on pipe size and wall thickness.

Rigid Couplings are recommended for low temperature and vacuum applications.


barkPa

Max.†End Load

kNLbs.

Max.*‡ End Gap

mmInches


kgLbs.

Nominal mm

Inches

O.D.mm

Inches A B C Qty.

Sizemm

Inches

50 60.3 6895 19.71 3.6 89.7 145.3 47.82

M16 x 70 2.02 2.375 1000 4,430.1 0.14 3.53 5.72 1.88 5⁄8 x 2-3⁄4 4.3

65 73.0 6895 28.88 3.6 103.1 152.4 47.82

M16 x 89 2.32-1⁄2 2.875 1000 6,491.8 0.14 4.06 6.00 1.88 5⁄8 x 3-1⁄2 5.0

80 88.9 6895 42.79 3.6 121.4 171.7 47.82

M16 x 89 2.43 3.500 1000 9,621.1 0.14 4.78 6.76 1.88 5⁄8 x 3-1⁄2 5.3

100 114.3 6895 70.74 6.4 152.7 215.9 53.32

M20 x 108 3.54 4.500 1000 15,904.3 0.25 6.01 8.50 2.10 3⁄4 x 4-1⁄4 7.7

150 168.3 6895 153.33 6.4 216.2 285.8 53.32

M22 x 140 7.36 6.625 1000 34,471.6 0.25 8.51 11.25 2.10 7⁄8 x 5-1⁄2 16.2

200 ◗ 219.1 5516 207.90 6.4 277.6 349.3 66.02

M24 x 140 10.9

8 8.625 800 46,741.0 0.25 10.93 13.75 2.60 1 x 5-1⁄2 24.0

250 ◗ 273.0 5516 322.97 6.4 341.9 406.4 66.02

M24 x165 14.5

10 10.750 800 72,610.1 0.25 13.46 16.00 2.60 1 x 6-1⁄2 32.0

300 ◗ 323.9 5516 454.32 6.4 394.2 457.2 66.02

M24 x165 18.1

12 12.750 800 102,141.0 0.25 15.52 18.00 2.60 1 x 6-1⁄2 40.0


otherpipematerialsand/orwallthickness.ContactGRINNELLMechanicalProductsfordetails.‡Maxendgapanddeflectionisforcutgroovedstandardweightpipe.Valuesforrollgroovedpipewillbehalfthatofcutgrooved.◗ SizesareavailabletoJISstandards.ContactGRINNELLMechanicalProductsfordetails.Forinformationonlargersizes,contactGRINNELLMechanicalProducts.Seepage111forstainlesssteelcouplingspecifications,andseepages140-146forgasketinformation.

C

A

B

stai

nles

s st

eel s

yste



The Figure 405 Flexible Coupling is made of 316L stainless steel and is capable of pressures up to 5,171 kPa (750 psi), depending on pipe size and wall thickness.

B C

A

Pipe SizeMax.†

PressureskPapsi

Max.†End Load

kNLbs.

Max.*‡ End Gap

mmInches


kgLbs.

Nominal mm

Inches

O.D.mm

Inches

Degreesper

coupling

mm/mIn/Ft

A B C Qty.Size**

mmInches

25 33.4 5171 4.53 3.35° 26'

95.1 56.0 97.0 46.02

M10 x 57 0.61 1.315 750 1,018.6 0.13 0.90 2.20 3.82 1.81 3⁄8 x 2-1⁄4 1.5

32 42.4 5171 7.22 3.34° 19'

75.0 65.0 106.4 46.02

M10 x 57 0.71-1⁄4 1.660 750 1,623.1 0.13 0.90 2.56 4.19 1.81 3⁄8 x 2-1⁄4 1.5

40 48.3 5171 9.46 3.33° 46'

65.8 69.9 112.8 46.02

M10 x 57 0.71-1⁄2 1.900 750 2,126.4 0.13 0.79 2.75 4.44 1.81 3⁄8 x 2-1⁄4 1.6

50 60.3 3447 9.85 3.33° 1'

52.5 82.6 124.0 47.82

M10 x 57 0.82 2.375 500 2,215.0 0.13 0.63 3.25 4.88 1.88 3⁄8 x 2-1⁄4 1.7

65 73.0 3447 14.44 3.32° 29'

43.3 93.7 139.7 47.82

M10 x 57 0.92-1⁄2 2.875 500 3,245.8 0.13 0.52 3.69 5.50 1.88 3⁄8 x 2-1⁄4 2.0

65 ◗ 76.1 3447 15.72 3.32° 23'

41.7 101.6 146.10 47.82

M12 x 89 1.4

– 3.000 500 3,534.2 0.13 0.50 4.00 5.75 1.88 – 3.1

80 88.9 3447 21.40 3.32° 3'

35.8 111.3 165.1 47.82

M12 x 89 1.43 3.500 500 4,810.4 0.13 0.43 4.38 6.50 1.88 1⁄2 x 3 3.1

100 114.3 2241 22.99 6.43° 11'

55.8 144.5 196.9 52.32

M12 x 89 1.84 4.500 325 5,168.7 0.25 0.67 5.69 7.75 2.06 1⁄2 x 3 4.0

125 ◗ 139.7 1379 21.13 6.42° 36'

45.5 173.0 247.7 52.32

M16 x 83 3.3

– 5.500 200 4,751.5 0.25 0.55 6.81 9.75 2.06 – 7.2

125 141.3 1379 21.62 6.42° 35'

45.0 174.8 247.7 52.32

M16 x 83 3.25 5.563 200 4,861.0 0.25 0.54 6.88 9.75 2.06 5⁄8 x 3-1⁄4 7.1

150 168.3 1379 30.67 6.42° 10'

37.5 201.7 271.5 52.32

M16 x 83 3.26 6.625 200 6,894.1 0.25 0.45 7.94 10.69 2.06 5⁄8 x 3-1⁄4 7.1

200 219.1 1379 51.97 6.41° 40'

29.2 258.8 344.4 63.52

M20 x 121 6.68 8.625 200 11,684.9 0.25 0.35 10.19 13.56 2.50 3⁄4 x 4-3⁄4 14.5

Valuesforrollgroovedpipewillbehalfthatofcutgrooved.* Maximumavailablegapbetweenpipeends.Minimumgap=0.† Maximumpressureandendloadaretotalfromallloadsbasedonstandardweightstainlesssteelpipe.Pressureratingsandendloadsmay

differforotherpipematerialsand/orwallthickness.ContactGRINNELLMechanicalProductsfordetails.‡Maxendgapanddeflectionisforcutgroovedstandardweightstainlesssteelpipe.**ContactGRINNELLMechanicalProductsforavailabilityofinchboltsizesvs.metricboltsizes.◗ SizesareavailabletoJISstandards.ContactGRINNELLMechanicalProductsfordetails.Forinformationonlargersizes,contactGRINNELLMechanicalProducts.Seepage111forstainlesssteelcouplingspecifications,andseepages140-146forgasketinformation.

Figure 405 Stainless Steel Flexible CouplingsTech Data Sheet: G565

stai

nles

s st

eel s

yste

Ms



Pipe SizeC to Emm

Inches

Approx.Weight

kgLbs.

Nominal mm

Inches

O.D.mm

Inches

25 33.4 73.2 0.451 1.315 2.88 1.0

32 42.4 79.5 0.451-1⁄4 1.660 3.13 1.040 48.3 88.9 0.45

1-1⁄2 1.900 3.50 1.050 60.3 114.3 0.502 2.375 4.50 1.165 73.0 127.0 0.77

2-1⁄2 2.875 5.00 1.765 76.1 130.0 1.41– 3.000 5.12 3.180 88.9 114.3 1.183 3.500 4.50 2.6

100 114.3 152.4 2.134 4.500 6.00 4.7

125 141.3 190.5 3.815 5.563 7.50 8.4

150 168.3 228.6 4.676 6.625 9.00 10.3

200 219.1 304.8 7.988 8.625 12.00 17.6

250 273.0 381.0 22.3210 10.750 15.00 49.2300 323.9 457.2 35.5612 12.750 18.00 78.4


Seepage111forstainlesssteelfittingspecifications.

Pipe SizeC to Emm

Inches

Approx.Weight

kgLbs.

Nominal mm

Inches

O.D.mm

Inches

25 33.4 50.8 0.271 1.315 2.00 0.632 42.4 50.8 0.36

1-1⁄4 1.660 2.00 0.840 48.3 88.9 0.45

1-1⁄2 1.900 3.50 1.050 60.3 69.9 0.542 2.375 2.75 1.265 73.0 71.4 0.77

2-1⁄2 2.875 2.81 1.765 76.1 73.0 1.41– 3.000 2.87 3.180 88.9 50.8 0.593 3.500 2.00 1.3

100 114.3 63.5 1.044 4.500 2.50 2.3

125 141.3 79.4 1.905 5.563 3.13 4.2

150 168.3 95.3 2.316 6.625 3.75 5.1

200 219.1 127.0 6.268 8.625 5.00 13.8

250 273.0 158.8 11.1610 10.750 6.25 24.6300 323.9 190.5 17.7812 12.750 7.50 39.2



C to E

C to E

Figure 410 Fabricated 90° Elbow

Figure 401 Fabricated 45° Elbow

Figure 410A Full-Flow 90° Elbow

Figure 401A Full-Flow 45° Elbow

C to E

C to E

Figure 410 90° Stainless Steel Elbows


Figure 401 45° Stainless Steel Elbows


stai

nles

s st

eel s

yste



Pipe SizeC to Emm

Inches

Approx.Weight

kgLbs.

Nominal mm

Inches

O.D.mm

Inches

25 33.4 73.2 0.451 1.315 2.88 1.032 42.4 85.9 0.68

1-1⁄4 1.660 3.38 1.540 48.3 85.9 0.73

1-1⁄2 1.900 3.38 1.6

50 60.3 69.9 1.042 2.375 2.75 2.365 73.0 78.0 1.00

2-1⁄2 2.875 3.07 2.265 76.1 76.0 1.41– 3.000 2.99 3.180 88.9 95.8 1.413 3.500 3.77 3.1

100 114.3 113.5 2.224 4.500 4.47 4.9

125 141.3 150.1 3.49 5 5.563 5.91 7.1

150 168.3 150.1 5.316 6.625 5.91 11.7

200 219.1 197.9 9.078 8.625 7.79 20.0

250 273.0 225.8 15.6010 10.750 8.89 34.4300 323.9 263.9 23.8112 12.750 10.39 52.5



Pipe Size NominalE to Emm

Inches

Approx.Weight

kgLbs.

Nominal mm

Inches

O.D.mm

Inches

25 33.4 27.5 0.091 1.315 1.08 0.232 42.4 27.5 0.09

1-1⁄4 1.660 1.08 0.440 48.3 27.5 0.09

1-1⁄2 1.900 1.08 0.550 60.3 27.5 0.092 2.375 1.08 0.765 73.0 27.5 0.45

2-1⁄2 2.875 1.08 1.065 76.1 60.0 1.41– 3.000 2.36 3.180 88.9 27.5 0.913 3.500 1.08 2.0

100 114.3 28.7 1.414 4.500 1.13 3.1

125 * 141.3 76.2 0.685 5.563 3.00 1.5

150 * 168.3 88.9 0.686 6.625 3.50 1.5

200 * 219.1 101.6 1.418 8.625 4.00 3.1

250 * 273.0 127.0 2.7210 10.750 5.00 6.0

300 * 323.9 152.4 3.5412 12.750 6.00 7.8

*DishedCapForinformationonlargersizes,contactGRINNELLMechanical

Products.Seepage111forstainlesssteelfittingspecifications.

Figure 460A Full-Flow End Cap

Figure 460 Fabricated End Cap

125 - 300mm (5" - 12")

125 - 300mm (5" - 12")

25 - 100mm (1" - 4")

25 - 100mm (1" - 4")

E to E E to E

C to E

C to E

Figure 419 Fabricated Tee

Figure 419A Full-Flow Tee

C to E

C to E

E to EE to E

Figure 419 TeesTech Data Sheet: G570

Figure 460 End CapsTech Data Sheet: G570

stai

nles

s st

eel s

yste

Ms



Pipe SizeC to Emm

Inches

C to Bmm

Inches

Approx. Weight

kgLbs.

Nominal mm

Inches

O.D.mm

Inches

40 x 40 x 25 48.3 x 48.3 x 33.4 85.9 85.9 0.731-1⁄2 x 1-1⁄2 x 1 1.900 x 1.900 x 1.315 3.38 3.38 1.6

40 x 40 x 32 48.3 x 48.3 x 42.4 85.9 85.9 0.731-1⁄2 x 1-1⁄2 x 1-1⁄4 1.900 x 1.900 x 1.660 3.38 3.38 1.6

50 x 50 x 25 60.3 x 60.3 x 33.4 82.6 69.9 1.002 x 2 x 1 2.375 x 2.375 x 1.315 3.25 3.38 2.2

50 x 50 x 32 60.3 x 60.3 x 42.4 82.6 82.6 1.092 x 2 x 1-1⁄4 2.375 x 2.375 x 1.660 3.25 3.25 2.450 x 50 x 40 60.3 x 60.3 x 48.3 69.9 69.9 1.092 x 2 x 1-1⁄2 2.375 x 2.375 x 1.900 2.75 2.75 2.450 x 50 x 40 60.3 x 60.3 x 33.4 95.3 95.3 1.41

2-1⁄2 x 2-1⁄2 x 1 2.375 x 2.375 x 1.315 3.75 3.75 3.150 x 50 x 40 60.3 x 60.3 x 48.3 95.3 95.3 1.54

2-1⁄2 x 2-1⁄2 x 1-1⁄2 2.375 x 2.375 x 1.900 3.75 3.75 3.450 x 50 x 40 60.3 x 60.3 x 60.3 78.0 78.0 1.63

2-1⁄2 x 2-1⁄2 x 2 2.375 x 2.375 x 2.375 3.07 3.07 3.680 x 80 x 25 88.9 x 88.9 x 33.4 108.0 108.0 1.95

3 x 3 x 1 3.500 x 3.500 x 1.315 4.25 4.25 4.380 x 80 x 32 88.9 x 88.9 x 42.2 108.0 108.0 1.953 x 3 x 1-1⁄4 3.500 x 3.500 x 1.660 4.25 4.25 4.380 x 80 x 40 88.9 x 88.9 x 48.3 108.0 108.0 2.003 x 3 x 1-1⁄2 3.500 x 3.500 x 1.900 4.25 4.25 4.480 x 80 x 50 88.9 x 88.9 x 60.3 95.8 82.0 2.00

3 x 3 x 2 3.500 x 3.500 x 2.375 3.77 3.23 4.480 x 80 x 65 88.9 x 88.9 x 73.0 95.8 82.0 2.003 x 3 x 2-1⁄2 3.500 x 3.500 x 2.875 3.77 3.23 4.4

100 x 100 x 50 114.3 x 114.3 x 60.3 113.5 97.0 2.004 x 4 x 2 4.500 x 4.500 x 2.375 4.47 3.82 4.4

100 x 100 x 65 114.3 x 114.3 x 73.0 113.5 113.5 2.004 x 4 x 2-1⁄2 4.500 x 4.500 x 2.875 5.00 5.00 4.4

100 x 100 x 80 114.3 x 114.3 x 88.9 113.5 69.9 2.224 x 4 x 3 4.500 x 4.500 x 3.500 4.47 3.38 4.9

150 x 150 x 40 168.3 x 168.3 x 48.3 150.1 150.1 4.226 x 6 x 1-1⁄2 6.625 x 6.625 x 1.900 5.91 5.91 9.3

150 x 150 x 50 168.3 x 168.3 x 88.9 150.1 150.1 4.226 x 6 x 2 6.625 x 6.625 x 2.375 5.91 5.91 9.3

150 x 150 x 80 168.3 x 168.3 x 60.3 150.1 124.0 4.226 x 6 x 3 6.625 x 6.625 x 3.500 5.91 4.88 9.3

150 x 150 x 100 168.3 x 168.3 x 114.3 150.1 130.0 4.226 x 6 x 4 6.625 x 6.625 x 4.500 5.91 5.12 9.3

200 x 200 x 100 219.1 x 219.1 x 114.1 197.9 160.3 8.218 x 8 x 4 8.625 x 8.625 x 4.500 7.79 6.31 18.1

200 x 200 x 150 219.1 x 219.1 x 168.3 197.9 168.1 8.218 x 8 x 6 8.625 x 8.625 x 6.625 7.79 6.62 18.1

250 x 250 x 150 273.0 x 273.0 x 168.3 225.8 195.6 13.2910 x 10 x 6 10.750 x 10.750 x 6.625 8.89 7.70 29.3

250 x 250 x 200 273.0 x 273.0 x 219.1 225.8 218.2 14.3810 x 10 x 8 10.750 x 10.750 x 8.625 8.89 8.59 31.7

300 x 300 x 200 323.9 x 323.9 x 219.1 263.9 242.0 19.9612 x 12 x 8 12.750 x 12.750 x 8.625 10.39 9.51 44

300 x 300 x 250 323.9 x 323.9 x 273.0 263.9 251.2 19.9612 x 12 x 10 12.750 x 12.750 x 10.750 10.39 9.89 44

Forinformationonlargersizes,contactGRINNELLMechanicalProducts.Seepage111forstainlesssteelfittingspecifications.

C to B

C to E

Figure 450 Fabricated Reducing Tee

Figure 421A Full-Flow Reducing Tee

C to B

C to E

Figure 421 Reducing TeesTech Data Sheet: G570

stai

nles

s st

eel s

yste



Pipe SizeE to E

mm Inches

Approx. Weight kg Lbs.

Nominal mm Inches

O.D.mm Inches

40 x 25 48.3 x 33.7 95.3 0.641-1⁄2 x 1 1.900 x 1.315 3.75 1.440 x 32 48.3 x 42.4 95.3 0.64

1-1⁄2 x 1-1⁄4 1.900 x 1.660 3.75 1.450 x 25 60.3 x 33.7 95.3 0.682 x 1 2.375 x 1.315 3.75 1.5

50 x 32 60.3 x 42.4 95.3 1.132 x 1-1⁄4 2.375 x 1.660 3.75 2.550 x 40 60.3 x 48.3 127.0 1.132 x 1-1⁄2 2.375 x 1.900 5.00 2.565 x 40 73.0 x 48.3 127.0 1.59

2-1⁄2 x 1-1⁄2 2.875 x 1.900 5.00 3.565 x 50 73.0 x 60.3 127.0 1.592-1⁄2 x 2 2.875 x 2.375 5.00 3.580 x 25 88.9 x 33.7 127.0 1.813 x 1 3.500 x 1.315 5.00 4.0

80 x 32 88.9 x 42.4 127.0 1.953 x 1-1⁄4 3.500 x 1.660 5.00 4.380 x 40 88.9 x 48.3 127.0 2.003 x 1-1⁄2 3.500 x 1.900 5.00 4.480 x 50 88.9 x 60.3 127.0 2.173 x 2 3.500 x 2.375 5.00 4.8

80 x 65 88.9 x 73.0 127.0 2.173 x 2-1⁄2 3.500 x 2.875 5.00 4.8100 x 50 114.3 x 60.3 127.0 2.17

4 x 2 4.500 x 2.375 5.00 4.8100 x 65 114.3 x 73.0 127.0 2.174 x 2-1⁄2 4.500 x 2.875 5.00 4.8100 x 80 114.3 x 88.9 127.0 2.27

4 x 3 4.500 x 3.500 5.00 5.0125 x 80 141.3 x 88.9 228.6 3.18

5 x 3 5.563 x 3.500 9.00 7.0125 x 100 141.3 x 114.3 228.6 3.18

5 x 4 5.563 x 4.500 9.00 7.0150 x 50 168.3 x 60.3 228.6 3.18

6 x 2 6.625 x 2.375 9.00 7.0150 x 65 168.3 x 73.0 381.0 3.186 x 2-1⁄2 6.625 x 2.875 15.00 7.0150 x 80 168.3 x 88.9 139.7 3.13

6 x 3 6.625 x 3.500 5.50 6.9150 x 100 168.3 x 114.3 139.7 3.18

6 x 4 6.625 x 4.500 5.50 7.0200 x 100 219.1 x 114.3 152.4 4.35

8 x 4 8.625 x 4.500 6.00 9.6200 x 150 219.1 x 168.3 152.4 4.35

8 x 6 8.625 x 6.625 6.00 9.6250 x 100 273.0 x 114.3 254.0 5.62

10 x 4 10.750 x 4.500 10.00 12.4250 x 150 273.0 x 168.3 177.8 5.62

10 x 6 10.750 x 6.625 7.00 12.4250 x 200 273.0 x 219.1 177.8 6.76

10 x 8 10.750 x 8.625 7.00 14.9300 x 150 323.9 x 168.3 355.6 9.98

12 x 6 12.750 x 6.625 14.00 22.0300 x 200 323.9 x 219.1 355.6 9.98

12 x 8 12.750 x 8.625 14.00 22.0300 x 250 323.9 x 273.0 355.6 11.7912 x 10 12.750 x 10.750 14.00 26.0


E to E

E to E

Figure 450 Fabricated Concentric Reducer

Figure 450A Full-Flow Concentric Reducer

Figure 450 Concentric ReducersTech Data Sheet: G570

stai

nles

s st

eel s

yste

Ms



Pipe SizeE to E

mm Inches

Approx. Weight kg Lbs.

Nominal mm Inches

O.D.mm Inches

40 x 25 48.3 x 33.7 95.3 0.641-1⁄2 x 1 1.900 x 1.315 3.75 1.440 x 32 48.3 x 42.4 95.3 0.64

1-1⁄2 x 1-1⁄4 1.900 x 1.660 3.75 1.450 x 25 60.3 x 33.7 95.3 0.682 x 1 2.375 x 1.315 3.75 1.5

50 x 32 60.3 x 42.4 95.3 1.132 x 1-1⁄4 2.375 x 1.660 3.75 2.550 x 40 60.3 x 48.3 127.0 1.132 x 1-1⁄2 2.375 x 1.900 5.00 2.5 65 x 50 73.0 x 60.3 127.0 1.592-1⁄2 x 2 2.875 x 2.375 5.00 3.580 x 25 88.9 x 33.4 127.0 1.953 x 1 3.500 x 1.315 5.00 4.3

80 x 50 88.9 x 60.3 127.0 1.953 x 2 3.500 x 2.375 5.00 4.3

80 x 65 88.9 x 73.0 127.0 1.953 x 2-1⁄2 3.500 x 2.875 5.00 4.5100 x 50 114.3 x 60.3 127.0 2.18

4 x 2 4.500 x 2.375 5.00 4.8100 x 65 114.3 x 73.0 127.0 2.634 x 2-1⁄2 4.500 x 2.875 5.00 5.8100 x 80 114.3 x 88.9 127.0 2.68

4 x 3 4.500 x 3.500 5.00 5.9125 x 80 141.3 x 88.9 228.6 2.68

5 x 3 5.563 x 3.500 9.00 5.9125 x 100 141.3 x 114.3 228.6 3.18

5 x 4 5.563 x 4.500 9.00 7.0150 x 50 168.3 x 60.3 228.6 3.17

6 x 2 6.625 x 2.375 9.00 7.0150 x 65 168.3 x 73.0 228.6 3.176 x 2-1⁄2 6.625 x 2.875 9.00 7.0150 x 80 168.3 x 88.9 228.6 3.18

6 x 3 6.625 x 3.500s 9.00 7.0150 x 100 168.3 x 114.3 127.0 3.18

6 x 4 6.625 x 4.500 5.00 7.0200 x 80 219.1 x 88.9 254.0 4.22

8 x 3 8.625 x 3.500 10.00 9.3200 x 100 219.1 x 114.3 304.8 4.22

8 x 4 8.625 x 4.500 12.00 9.3200 x 150 219.1 x 168.3 203.2 3.18

8 x 6 8.625 x 6.625 8.00 7.0250 x 150 273.0 x 168.3 330.2 5.62

10 x 6 10.750 x 6.625 13.00 12.4250 x 200 273.0 x 219.1 330.2 5.22

10 x 8 10.750 x 8.625 13.00 11.5300 x 150 323.9 x 168.3 355.6 9.57

12 x 6 12.750 x 6.625 14.00 21.1300 x 200 323.9 x 219.1 355.6 9.57

12 x 8 12.750 x 8.625 14.00 21.1300 x 250 323.9 x 273.0 355.6 9.5712 x 10 12.750 x 10.750 14.00 21.1


E to E


Figure 451A Full-Flow Eccentric Reducer

E to E

Figure 451 Eccentric ReducersTech Data Sheet: G570

stai

nles

s st

eel s

yste



Pipe SizeE to E mm

Inches


Approx. Weightkg

Lbs.

Nominal mm

Inches

O.D.mm

Inches

50 60.3 101.64

2.82 2.375 4.00 6.4

65 73.0 101.64

4.02-1⁄2 2.875 4.00 8.8

80 88.9 101.64

4.73 3.500 4.00 10.4

100 114.3 152.48

8.34 4.500 6.00 18.2

125 141.3 152.48

10.05 5.563 6.00 22.0

150 168.3 152.48

12.76 6.625 6.00 28.1

200 219.1 152.48

19.88 8.625 6.00 43.7


E to E


Figure 441A Full-Flow Flange Adapter

E to E

Figure 441 Flange Adapters (ANSI Class 150#)

plai

n en

D sy

steM

spLAiN END SySTEmS


Figure 909Plain End Couplings

Page – 124

Figure 910Plain End 90° Elbows

Page – 125

Figure 901Plain End 45° Elbows

Page – 125

Figure 910LRPlain End Long Radius

90° ElbowsPage – 126

Figure 901LRPlain End Long Radius

45° ElbowsPage – 126

Figure 919Plain End TeesPage – 127

Figure 921Plain End Reducing Tees

Page – 128

Figure 927Plain End Crosses

Page – 128

Figure 960Plain End Caps

Page – 128

Figure 924Plain End 90° True Wyes

Page – 129

Figure 914Plain End 45° Laterals

Page – 129

Figure 999Plain End Swaged Nipples

Page – 130

Figures 991, 992 993Plain End Adapter Nipples

Page – 131

Figure 941 & 942Plain End Flange Adapters

Page – 132

Plain End Systems Pictorial Table of Contents

plai

n en

D sy

steM

s

pLAiN END SySTEmS


The GRINNELL Plain End Piping System is designed for use in both maintenance and new system applications and eliminates the need for pipe end preparation. The Figure 909 Plain End Coupling features case-hardened gripping teeth that securely grip onto the pipe surface. The coupling is designed for schedule 40 steel pipe and is not for use with steel pipe with a Brinell hardness greater than 150 HB, nor is it switchable for plastic pipe, cast, or ductile iron pipe.

Contact GRINNELL Mechanical Products about other materials and pipe schedules. Follow bolt torque ratings to ensure a properly assembled coupling.

Coupling Ductile Iron Housing Specifications





• ASTM A 153 – Standard specification for hot-dipped galvanising





code identification and conform to ASTM D 2000 for service temperatures from -34°C to 110°C (-30°F to 230°F). They are recommended for hot water not to exceed 110°C (230°F), plus a variety of dilute acids, oil free air, and many chemical services. They are not recommended for petroleum services. For low temperature and vacuum systems, a Tri-Seal Grade “E” EPDM gasket with rigid coupling is recommended.

• Grade “T” Nitrile gaskets have an orange colour code identification and conform to ASTM D 2000 for service temperatures from -29°C to 82°C (-20°F to 180°F). They are recommended for petroleum products, vegetable oils, mineral oils, and air with oil vapours.


Fitting Specifications• Carbon steel: according to ASTM A 53, Grade B



• Sizes 32mm – 250mm (1¼" – 10") – Schedule 40

• Sizes 300mm – 600mm (12" – 24") – Std. Wall (.375)


• Hot-Dipped, Zinc galvanised (optional)


Fitting SpecificationsTech Data Sheet: G192

Coupling SpecificationsTech Data Sheet: G190

Plain end fittings are manufactured to provide minimum pressure drop and uniform flow. Fittings are designed for use with the Figure 909 Plain End Couplings only.

Plain end fittings are available in a variety of styles.

plai

n en

D sy

steM

spLAiN END SySTEmS


The GRINNELL Figure 909 Plain End Coupling utilises hardened gripping teeth to securely grip onto plain and bevelled end pipe surfaces. It is capable of pressures up to 5,171 kPa (750 psi) depending on pipe size and wall thickness.

The Figure 909 Plain End Coupling is designed for Schedule 40 steel pipe and is not for use with steel pipe with a Brinnell hardness greater than 150 HB, plastic, cast, or ductile iron pipes. Contact GRINNELL Mechanical Products for recommendations on other materials and pipe schedules.


kPapsi

Max.†End Load

kNLbs.


kgLbs.

Nominal mm

Inches

O.D.mm

Inches A B C Qty.

Sizemm

Inches

Bolt Torque Nm

Lbs.-ft50 60.3 5171 14.78 93.7 146.1 84.1

2M16 x 90 203.0 2.4

2 2.375 750 3322.6 3.69 5.75 3.31 5⁄8 x 3-1⁄2 150 5.4

65 73.0 4137 17.33 105.9 158.8 84.12

M16 x 90 203.0 2.72-1⁄2 2.875 600 3895.1 4.17 6.25 3.31 5⁄8 x 3-1⁄2 150 5.9

80 88.9 4137 25.68 122.2 192.0 84.12

M20 x 121 271.0 4.13 3.500 600 5772.7 4.81 7.56 3.31 3⁄4 x 4-3⁄4 200 9.0

100 114.3 3103 31.83 150.6 219.2 98.62

M20 x 121 271.0 6.14 4.500 450 7,156.9 5.93 8.63 3.88 3⁄4 x 4-3⁄4 200 13.5

150 168.3 2068 46.00 208.0 296.7 108.02

M24 x 165 339.0 10.76 6.625 300 10,341.5 8.19 11.68 4.25 1 x 6-1⁄2 250 23.5

200 219.1 1724 64.97 271.5 346.2 124.74

M22 x 140 339.0 15.98 8.625 250 14,606.6 10.69 13.63 4.91 7⁄8 x 5-1⁄2 250 35.1

250 273.0 1724 100.93 333.5 403.4 124.74

M22 x 140 407.0 22.010 10.750 250 22,690.6 13.13 15.88 4.91 7⁄8 x 5-1⁄2 300 48.5

† Maximumpressureandendloadaretotalfromallloadsbasedonstandardweightsteelpipe.Pressureratingsandendloadsmaydifferforotherpipematerialsand/orwallthickness.ContactGRINNELLMechanicalProductsfordetails.Forinformationonlargersizes,contactGRINNELLMechanicalProducts.Seepage123forplainendcouplingspecifications,andseepages140-146forgasketinformation.

50mm - 150mm (2" - 6") (2 Bolts) 200mm - 250mm (8" - 10") (4 Bolts)

BC

CB

A A

Figure 909 Plain End CouplingsTech Data Sheet: G190

plai

n en

D sy

steM

s

pLAiN END SySTEmS


Pipe SizeC to Emm

Inches

Approx.Weight

kgLbs.

Nominal mm

Inches

O.D.mm

Inches

50 60.3 82.6 0.82 2.375 3.25 1.8

65 73.0 95.3 1.42-1⁄2 2.875 3.75 3.1

65 76.1 95.3 1.5– 3.000 3.75 3.2

80 88.9 108.0 2.23 3.500 4.25 4.8

100 114.3 127.0 3.44 4.500 5.00 7.5

125 139.7 139.7 5.1– 5.500 5.50 11.3

125 141.3 139.7 5.35 5.563 5.50 11.6

150 165.1 165.1 7.7– 6.500 6.50 16.9

150 168.3 165.1 7.56 6.625 6.50 16.6

200 219.1 196.9 13.48 8.625 7.75 29.6


Seepage123forplainendfittingspecifications.

Pipe SizeC to Emm

Inches

Approx.Weight

kgLbs.

Nominal mm

Inches

O.D.mm

Inches

50 60.3 50.8 0.62 2.375 2.00 1.3

65 73.0 57.2 1.02-1⁄2 2.875 2.25 2.1

65 76.1 57.2 1.0– 3.000 2.25 2.2

80 88.9 63.5 1.63 3.500 2.50 3.5

100 114.3 76.2 2.54 4.500 3.00 5.5

125 139.7 82.6 3.5– 5.500 3.25 7.7

125 141.3 82.6 3.75 5.563 3.25 8.1

150 165.1 88.9 5.0– 6.500 3.50 11.0

150 168.3 88.9 5.16 6.625 3.50 11.2

200 219.1 108.0 8.68 8.625 4.25 19.0



C to E C to E

Figure 910 90° Plain End Elbows


Figure 901 45° Plain End Elbows


plai

n en

D sy

steM

spLAiN END SySTEmS


Pipe SizeC to Emm

Inches

Approx.Weight

kgLbs.

Nominal mm

Inches

O.D.mm

Inches

50 60.3 69.9 0.82 2.375 2.75 1.8

65 73.0 76.2 1.32-1⁄2 2.875 3.00 2.9

65 76.1 76.2 1.4– 3.000 3.00 3.1

80 88.9 85.9 2.13 3.500 3.38 4.6

100 114.3 101.6 3.44 4.500 4.00 7.5

125 139.7 127.0 5.7– 5.500 5.00 12.5

125 141.3 127.0 5.75 5.563 5.00 12.5

150 165.1 139.7 5.4– 6.500 5.50 12.0

150 168.3 139.7 5.46 6.625 5.50 12.0

200 219.1 184.2 15.48 8.625 7.25 34.0



Pipe SizeC to Emm

Inches

Approx.Weight

kgLbs.

Nominal mm

Inches

O.D.mm

Inches

50 60.3 111.3 1.22 2.375 4.38 2.7

65 73.0 127.0 1.92-1⁄2 2.875 5.00 4.2

65 76.1 127.0 2.0– 3.000 5.00 4.4

80 88.9 149.4 2.93 3.500 5.88 6.5

100 114.3 190.5 5.24 4.500 7.50 11.5

125 139.7 241.3 8.6– 5.500 9.50 19.0

125 141.3 241.3 8.85 5.563 9.50 19.4

150 165.1 273.1 12.0– 6.500 10.75 26.4

150 168.3 273.1 12.66 6.625 10.75 27.9

200 219.1 362.0 24.78 8.625 14.25 54.5



C to E C to E

Figure 910LR 90° Plain End Long Radius ElbowsTech Data Sheet: G192

Figure 901LR 45° Plain End Long Radius ElbowsTech Data Sheet: G192

plai

n en

D sy

steM

s

pLAiN END SySTEmS


Pipe SizeC to Emm

Inches

Approx.Weight

kgLbs.

Nominal mm

Inches

O.D.mm

Inches

50 60.3 82.6 1.22 2.375 3.25 2.7

65 73.0 95.3 2.02-1⁄2 2.875 3.75 4.4

65 76.1 95.3 2.9– 3.000 3.75 6.5

80 88.9 108.0 2.93 3.500 4.25 6.5

100 114.3 127.0 4.84 4.500 5.00 10.7

125 139.7 139.7 6.9– 5.500 5.50 15.2

125 141.3 139.7 7.05 5.563 5.50 15.5

150 165.1 165.1 11.0– 6.500 6.50 24.2

150 168.3 165.1 10.46 6.625 6.50 23.0

200 219.1 196.9 19.88 8.625 7.75 43.7



Pipe SizeC to Emm

Inches

Approx. Weight

kgLbs.

Nominal mm

Inches

O.D.mm

Inches

80 x 80 x 50 88.9 x 88.9 x 60.3 140.0 3.23 x 3 x 2 3.500 x 3.500 x 2.375 5.5 7.1

100 x 100 x 50 114.3 x 114.3 x 60.3 127.0 4.14 x 4 x 2 4.500 x 4.500 x 2.375 5.00 9.1

100 x 100 x 65 114.3 x 114.3 x 73.0 127.0 4.34 x 4 x 2-1⁄2 4.500 x 4.500 x 2.875 5.00 9.5

100 x 100 x 80 114.3 x 114.3 x 88.9 127.0 4.44 x 4 x 3 4.500 x 4.500 x 3.500 5.00 9.7

150 x 150 x 50 168.3 x 168.3 x 60.3 165.1 8.86 x 6 x 2 6.625 x 6.625 x 2.375 6.50 19.4

150 x 150 x 80 168.3 x 168.3 x 88.9 165.1 9.56 x 6 x 3 6.625 x 6.625 x 3.500 6.50 21.0

150 x 150 x 100 168.3 x 168.3 x 114.3 165.1 9.96 x 6 x 4 6.625 x 6.625 x 4.500 6.50 21.8

200 x 200 x 50 219.1 x 219.1 x 60.3 196.9 16.48 x 8 x 2 8.625 x 8.625 x 2.375 7.75 36.2

200 x 200 x 80 219.1 x 219.1 x 88.9 196.9 16.68 x 8 x 3 8.625 x 8.625 x 3.500 7.75 36.5

200 x 200 x 100 219.1 x 219.1 x 114.1 196.9 16.98 x 8 x 4 8.625 x 8.625 x 4.500 7.75 37.2

200 x 200 x 125 219.1 x 219.1 x 141.3 196.9 16.78 x 8 x 5 8.625 x 8.625 x 5.563 7.75 36.8

200 x 200 x 150 219.1 x 219.1 x 168.3 196.9 17.08 x 8 x 6 8.625 x 8.625 x 6.625 7.75 37.4

250 x 250 x 100 273.0 x 273.0 x 114.3 228.6 26.310 x 10 x 4 10.750 x 10.750 x 4.500 9.00 58.0

250 x 250 x 150 273.0 x 273.0 x 168.3 228.6 27.210 x 10 x 6 10.750 x 10.750 x 6.625 9.00 66.0

250 x 250 x 200 273.0 x 273.0 x 219.1 228.6 28.110 x 10 x 8 10.750 x 10.750 x 8.625 9.00 62.0



C to E C to E

Figure 919 Plain End Tees


Figure 921 Plain End Reducing Tees


plai

n en

D sy

steM

spLAiN END SySTEmS


Pipe SizeE to Emm

Inches

Approx.Weight

kgLbs.

Nominal mm

Inches

O.D.mm

Inches

50 60.3 82.6 1.72 2.375 3.25 3.7

65 73.0 95.3 2.62-1⁄2 2.875 3.75 5.8

65 76.1 95.3 2.7– 3.000 3.75 6.0

80 88.9 108.0 3.93 3.500 4.25 8.6

100 114.3 127.0 9.44 4.500 5.00 20.7

125 141.3 139.7 8.45 5.563 5.50 18.5

150 165.1 165.1 12.4– 6.500 6.50 27.3

150 168.3 165.1 13.06 6.625 6.50 28.6

200 219.1 196.9 21.78 8.625 7.75 48.0



Pipe SizeE to Emm

Inches

Approx.Weight

kgLbs.

Nominal mm

Inches

O.D.mm

Inches

50 60.3 102.0 1.02 2.375 4 2.3

65 73.0 127.0 1.42-1⁄2 2.875 5 3.0

80 88.9 152.4 2.03 3.500 6 4.5

100 114.3 178.0 3.44 4.500 7 7.5

125 141.3 216.0 5.75 5.563 8.5 12.5

150 168.3 254.0 7.76 6.625 10 17.0

200 219.1 279.4 13.28 8.625 11 29.0



C to E

E to E

Figure 927 Plain End CrossesTech Data Sheet: G192

Figure 960 Plain End CapsTech Data Sheet: G192

plai

n en

D sy

steM

s

pLAiN END SySTEmS


Pipe SizeC to LE

mmInches

C to SEmm

Inches

Approx. Weight

kgLbs.

Nominal mm

Inches

O.D.mm

Inches

50 60.3 82.6 69.9 1.12 2.375 3.25 2.75 2.5

65 73.0 95.3 76.2 2.02-1⁄2 2.875 3.75 3.00 4.4

80 88.9 108.0 82.6 2.93 3.500 4.25 3.25 6.4

100 114.3 127.0 95.3 4.84 4.500 5.00 3.75 10.5

125 141.3 139.7 101.6 6.95 5.563 5.50 4.00 15.2

150 168.3 165.1 114.3 10.46 6.625 6.50 4.50 22.9

200 219.1 196.9 152.4 19.08 8.625 7.75 6.00 41.9



Pipe SizeC to LE

mmInches

C to SEmm

Inches

Approx. Weight

kgLbs.

Nominal mm

Inches

O.D.mm

Inches

50 60.3 177.8 69.9 2.02 2.375 7.00 2.75 4.5

65 73.0 196.9 76.2 3.52-1⁄2 2.875 7.75 3.00 7.7

80 88.9 215.9 82.6 5.03 3.500 8.50 3.25 11.0

100 114.3 266.7 95.3 8.54 4.500 10.50 3.75 18.7

125 141.3 317.5 101.6 13.35 5.563 12.50 4.00 29.4

150 168.3 355.6 114.3 19.16 6.625 14.00 4.50 42.2

200 219.1 457.2 152.4 32.28 8.625 18.00 6.00 70.9



C to SE

C to LE

C to LE

C to SEC to LE

Figure 924 Plain End True Wyes


Figure 914 Plain End Laterals


plai

n en

D sy

steM

spLAiN END SySTEmS


Pipe SizeE to Emm

Inches

Approx. Weight

kgLbs.

Nominal mm

Inches

O.D.mm

Inches

65 x 50 73.0 x 60.3 177.8 1.62-1⁄2 x 2 2.875 x 2.375 7.00 3.5

80 x 50 88.9 x 60.3 203.2 2.33 x 2 3.500 x 2.375 8.00 5.0

80 x 65 88.9 x 73.0 203.2 2.33 x 2-1⁄2 3.500 x 2.875 8.00 5.0

100 x 50 114.3 x 60.3 228.6 3.64 x 2 4.500 x 2.375 9.00 8.0

100 x 65 114.3 x 73.0 228.6 3.64 x 2-1⁄2 4.500 x 2.875 9.00 8.0

100 x 80 114.3 x 88.9 228.6 3.64 x 3 4.500 x 3.500 9.00 8.0

125 x 50 141.3 x 60.3 279.4 5.45 x 2 5.563 x 2.375 11.00 12.0

125 x 80 141.3 x 88.9 279.4 5.45 x 3 5.563 x 3.500 11.00 12.0

125 x 100 141.3 x 114.3 279.4 5.45 x 4 5.563 x 4.500 11.00 12.0

150 x 50 168.3 x 60.3 304.8 8.66 x 2 6.625 x 2.375 12.00 19.0

150 x 65 168.3 x 73.0 304.8 8.66 x 2-1⁄2 6.625 x 2.875 12.00 19.0

150 x 80 168.3 x 88.9 304.8 8.66 x 3 6.625 x 3.500 12.00 19.0

150 x 100 168.3 x 114.3 304.8 8.66 x 4 6.625 x 4.500 12.00 19.0

150 x 125 168.3 x 141.3 304.8 8.66 x 5 6.625 x 5.563 12.00 19.0

200 x 150 219.1 x 168.3 ◆ ◆

8 x 6 8.625 x 6.625 - -

◆Thesesizesareavailable.ContactGRINNELLMechanicalProductsfordetails.Forinformationonlargersizes,contactGRINNELLMechanicalProducts.Seepage123forplainendfittingspecifications.

E to E

Figure 999 Plain End Swaged NipplesTech Data Sheet: G192

plai

n en

D sy

steM

s

pLAiN END SySTEmS


Pipe SizeE to E mm

Inches

Approx. Weight

kgLbs.

Nominal mm

Inches

O.D.mm

Inches

50 60.3 101.6 0.52 2.375 4.00 1.2

65 73.0 101.6 0.92-1⁄2 2.875 4.00 1.9

80 88.9 101.6 1.13 3.500 4.00 2.5

100 114.3 154.4 2.44 4.500 6.00 5.4

125 141.3 154.4 3.35 5.563 6.00 7.3

150 168.3 154.4 4.36 6.625 6.00 9.4

200 219.1 154.4 6.48 8.625 6.00 14.2




Plain x Male Thread


Plain x Groove


Plain x Plain

E to E

E to E

E to E

Figures 991, 992, 993 Plain End Adapter Nipples


plai

n en

D sy

steM

spLAiN END SySTEmS


Pipe SizeFigure 941

Ansi Class 150# Figure 942

Ansi Class 300#Nominal

mmInches

O.D.mm

Inches

E to Emm

Inches


Approx. Weightkg

Lbs.

E to Emm

Inches


Approx. Weightkg

Lbs.

50 60.3 101.64

2.8 101.68

3.72 2.375 4.00 6.4 4.00 8.2

65 73.0 101.64

4.0 101.68

5.42-1⁄2 2.875 4.00 8.8 4.00 11.9

80 88.9 101.64

4.7 101.68

7.03 3.500 4.00 10.4 4.00 15.5

100 114.3 152.48

8.3 152.48

12.74 4.500 6.00 18.2 6.00 28.0

125 141.3 152.48

10.0 152.48

16.85 5.563 6.00 22.0 6.00 37.0

150 168.3 152.48

12.7 152.412

21.86 6.625 6.00 28.1 6.00 48.0

200 219.1 152.48

19.8 152.412

35.88 8.625 6.00 43.7 6.00 79.0

Forinformationonlargersizes,contactGRINNELLMechanicalProducts.Seepage123forplainendfittingspecifications.

Figure 941 Plain End Flange Adapter

ANSI Class 150#

Figure 942 Plain End Flange Adapter

ANSI Class 300#

E to E E to E

Figure 941 Plain End Flange Adapters (ANSI Class 150#) Figure 942 Plain End Flange Adapters (ANSI Class 300#)Tech Data Sheet: G192

hDpe

sys

teMs

HDpE SySTEmS


Figure 9094HDPE Flange Couplings

Page – 135

Figure 9095HDPE Couplings

Page – 136

Figure 9097HDPE Transition Couplings

Page – 137

Coupling Ductile Iron Housing Specifications





code identification and conform to ASTM D 2000 for service temperatures from -34°C to 110°C (-30°F to 230°F). They are recommended for hot water not to exceed 110°C (230°F), plus a variety of dilute acids, oil free air, and many chemical services. They are not recommended for petroleum services.



HDPE Systems Pictorial Table of Contents

hDpe

sys

teMs

HDpE SySTEmS


Figure 9094 Flange CouplingsTech Data Sheet: G584

The Figure 9094 HDPE Flange Coupling provides for an efficient transition from high-density polyethylene (HDPE) piping to ANSI class 125# or 150# flanged piping system. This coupling is ideal for mining, irrigation, and tunnelling applications.

Pipe Size Pipe Wall Thickness and Standard Dimension Ratio

Nominal mm

Inches

O.D.mm

Inches

Tol.+/-mm

Inches

Max. Pipe Ovality

+/-mm

Inches

SDR7.3mm

Inches

SDR9

mmInches

SDR11

mmInches

SDR15.5mm

Inches

SDR17

mmInches

SDR21

mmInches

SDR32.5mm

Inches

100 114.3 0.51 1.02 15.6 12.7 10.4 7.4 6.7 5.4 3.54 4.500 0.020 0.040 0.616 0.500 0.409 0.290 0.265 0.214 0.138

150 168.3 0.76 1.27 23.1 18.7 15.3 10.8 8.3 6.7 5.26 6.625 0.030 0.050 0.908 0.736 0.602 0.427 0.327 0.265 0.204

200 219.1 0.99 1.91 30.0 24.3 19.9 14.1 12.9 8.6 6.78 8.625 0.039 0.075 1.182 0.958 0.784 0.556 0.507 0.340 0.265

PerSpecificationforPolyethylene(P.E.)PlasticPipeASTMF714,D2447,D3035.

Pipe Size Dimensions - mm Inches Coupling Bolts ‡ Approx.Weight

kgLbs.

Nominal mm

Inches

O.D.mm

Inches A B C Quantity

Bolt SizeInches

100 114.3 229.0 260.0 79.08

6.84 4.500 9.00 10.25 3.10 5⁄8 x 3-1⁄4 15.0

150 168.3 279.0 311.0 95.08

9.86 6.625 11.00 12.25 3.75 3⁄4 x 3-1⁄2 21.5

200 219.1 343.0 375.0 87.08

13.18 8.625 13.50 14.75 3.42 3⁄4 x 3-3⁄4 28.8

‡ Matingboltsandnutsarenotsupplied.FlangematingboltsmustbeatleastSAEJ429,Grade5orstronger.Itistheresponsibilityofthepurchasertoverifycorrectlengthfortheintendedapplication.

Forinformationonlargersizes,contactGRINNELLMechanicalProducts.Seepage134forHDPEcouplingspecifications,andseepages140-146forgasketinformation.

CB

A

hDpe

sys

teMs

HDpE SySTEmS


The Figure 9095 HDPE Coupling is specially designed for joining sections of high-density polyethylene (HDPE) piping. The Figure 9095 features a four-bolt coupling design with machined gripping teeth to positively secure high-density polyethylene piping and create a leak-tight joint.

The contoured housing features an integrated ramp design that helps avoid obstacles while relocating pipe runs. This coupling is ideal for mining, irrigation, and tunnelling applications.

B

A

C

Pipe Size Dimensions - mm InchesCoupling Bolt SizeInches

Approx.Weight

kgLbs.

Nominal mm

Inches

O.D.mm

Inches A B C

50 60.3 86.0 133.0 117.0 2.62 2.375 3.39 5.24 4.61 1⁄2 x 2-3⁄8 5.7

80 88.9 117.0 165.0 102.0 3.63 3.500 4.61 6.50 4.02 1⁄2 x 2-3⁄4 7.9

100 114.3 146.0 203.0 146.0 5.24 4.500 5.75 7.99 5.75 1⁄2 x 3 11.4

150 168.3 200.0 273.0 149.0 8.26 6.625 7.87 10.75 5.87 5⁄8 x 3-1⁄2 18.0

200 219.1 264.0 333.0 152.0 12.58 8.625 10.39 13.11 5.98 5⁄8 x 3-1⁄2 27.5

250 273.0 318.0 397.0 165.0 20.010 10.750 12.52 15.63 6.50 3⁄4 x 4-3⁄4 44.0

300 323.9 365.0 448.0 200.0 25.512 12.750 14.37 17.64 7.87 3⁄4 x 4-3⁄4 56.1



Nominal mm

Inches

O.D.mm

Inches

Tol.+/-mm

Inches

Max. Pipe Ovality

+/-mm

Inches

SDR7.3mm

Inches

SDR9

mmInches

SDR11

mmInches

SDR15.5mm

Inches

SDR17

mmInches

SDR21

mmInches

SDR32.5mm

Inches

50 60.3 0.15 0.89 8.3 6.7 5.5 3.9 3.6 2.9 -2 2.375 0.006 0.035 0.325 0.264 0.216 0.153 0.140 0.113 -

80 88.9 0.41 1.02 12.2 9.9 8.1 5.7 5.2 4.2 2.73 3.500 0.016 0.040 0.479 0.389 0.318 0.226 0.206 0.167 0.108

100 114.3 0.51 1.02 15.6 12.7 10.4 7.4 6.7 5.4 3.54 4.500 0.020 0.040 0.616 0.500 0.409 0.290 0.265 0.214 0.138

150 168.3 0.76 1.27 23.1 18.7 15.3 10.8 8.3 6.7 5.26 6.625 0.030 0.050 0.908 0.736 0.602 0.427 0.327 0.265 0.204

200 219.1 0.99 1.91 30.0 24.3 19.9 14.1 12.9 8.6 6.78 8.625 0.039 0.075 1.182 0.958 0.784 0.556 0.507 0.340 0.265

250 273.0 1.22 1.91 37.4 30.3 24.8 17.6 16.1 13.0 8.410 10.750 0.048 0.075 1.473 1.194 0.977 0.694 0.632 0.512 0.331

300 323.9 1.45 1.91 44.4 36.0 29.4 20.9 19.1 15.4 10.012 12.750 0.057 0.075 1.747 1.417 1.159 0.823 0.750 0.607 0.392


Figure 9095 HDPE CouplingsTech Data Sheet: G580

hDpe

sys

teMs

HDpE SySTEmS


The Figure 9097 HDPE Transition Coupling provides for an efficient transition from grooved piping systems to high-density polyethylene (HDPE) piping. The Figure 9097 features a four-bolt coupling design with one side of machine gripping teeth and a grooved end creating a leak-tight joint between high-density polyethylene and grooved piping systems.

The contoured housing features the same integrated ramp design as the Figure 9095, which helps avoid obstacles while relocating pipe runs. This coupling is ideal for mining, irrigation, and tunnelling applications.

Pipe Size Dimensions - mm InchesCoupling Bolt SizeInches

Approx.Weight

kgLbs.

Nominal mm

Inches

O.D.mm

Inches A B C

50 60.3 86.0 152.0 79.0 2.02 2.375 3.39 5.99 3.11 1⁄2 x 2-3⁄8 4.4

80 88.9 114.0 181.0 79.0 2.73 3.500 4.49 7.13 3.11 1⁄2 x 3 5.9

100 114.3 146.0 216.0 95.0 3.84 4.500 5.75 8.50 3.74 1⁄2 x 3 8.4

150 168.3 203.0 286.0 95.0 5.76 6.625 8.00 11.26 3.74 5⁄8 x 3-1⁄2 12.5

200 219.1 267.0 346.0 108.0 9.78 8.625 10.51 13.63 4.25 5⁄8 x 3-1⁄2 21.3

250 273.0 321.0 432.0 127.0 16.010 10.750 12.64 17.00 5.00 3⁄4 x 4-3⁄4 35.2

300 323.9 375.0 495.0 127.0 19.612 12.750 14.76 19.49 5.00 3⁄4 x 4-3⁄4 43.1


B

A

C


Nominal mm

Inches

O.D.mm

Inches

Tol.+/-mm

Inches

Max. Pipe Ovality

+/-mm

Inches

SDR7.3mm

Inches

SDR9

mmInches

SDR11

mmInches

SDR15.5mm

Inches

SDR17

mmInches

SDR21

mmInches

SDR32.5mm

Inches

50 60.3 0.15 0.89 8.3 6.7 5.5 3.9 3.6 2.9 -2 2.375 0.006 0.035 0.325 0.264 0.216 0.153 0.140 0.113 -

80 88.9 0.41 1.02 12.2 9.9 8.1 5.7 5.2 4.2 2.73 3.500 0.016 0.040 0.479 0.389 0.318 0.226 0.206 0.167 0.108

100 114.3 0.51 1.02 15.6 12.7 10.4 7.4 6.7 5.4 3.54 4.500 0.020 0.040 0.616 0.500 0.409 0.290 0.265 0.214 0.138

150 168.3 0.76 1.27 23.1 18.7 15.3 10.8 8.3 6.7 5.26 6.625 0.030 0.050 0.908 0.736 0.602 0.427 0.327 0.265 0.204

200 219.1 0.99 1.91 30.0 24.3 19.9 14.1 12.9 8.6 6.78 8.625 0.039 0.075 1.182 0.958 0.784 0.556 0.507 0.340 0.265

250 273.0 1.22 1.91 37.4 30.3 24.8 17.6 16.1 13.0 8.410 10.750 0.048 0.075 1.473 1.194 0.977 0.694 0.632 0.512 0.331

300 323.9 1.45 1.91 44.4 36.0 29.4 20.9 19.1 15.4 10.012 12.750 0.057 0.075 1.747 1.417 1.159 0.823 0.750 0.607 0.392


Figure 9097 HDPE Transition CouplingsTech Data Sheet: G582

hDpe

sys

teMs

HDpE SySTEmS


Gask

ets

GASkETS


Pressure responsive gaskets are offered in a variety of types. Although they each serve a specific function they all utilise the same sealing design.

The GRINNELL gasket is designed to provide a three-way sealing action.

(1) Installation of the gasket over the outside sealing surface of the pipe compresses the lip seal and forms the initial seal.

(2) The installation of the housing segments around the gasket and into the pipe groove properly positions the gasket. Tightening of the housing segments forms the gasket to the inside of the housing and compresses it around the pipe-sealing surface thus increasing the gasket’s sealing against the pipe.

(3) The introduction of the system pressure energises the pressure responsive seal of the gasket and further enhances the sealing action.

First SealC-shaped rubber gasket seals on pipe ends.

Second SealThe housings compress the gasket to increase the sealing capacity.

First Seal

Third SealThe system pressure or vacuum will then maximise the leak-tight seal.



GRINNELL Gasket TypesTech Data Sheet: G610

Gask

ets

GASkETS


Standard The standard style gasket, with a “C” shape configuration, is the most commonly used. It is provided as the standard gasket in the Figure 705, 707, 770, 772, 405, and 472 GRINNELL Couplings. The gasket is available in Grade “E” and “EN” EPDM, Grade “T” Nitrile, Grade “L” Silicone, and Grade “O” Fluoroelastomer.

Tri-Seal The tri-seal gasket is designed to close off the gap or gasket cavity. This is accomplished by positioning the centre “rib” of the gasket over the gap between the pipes. The tri-seal gasket has two tapered sealing edges in addition to the centre rib for additional strength and sealing.

The Tri-Seal gasket can be used with the Figure 705, 707, 770, 772, 405, and 472 GRINNELL Couplings. It is recommended for use in low temperature and vacuum services (greater than 250mm Hg (10" Hg)) applications and potable water systems. Note only a petroleum-free silicone based lubricant is recommended for low temperature applications. The gasket is available in Grade “E”, “EN” EPDM, and Grade “T” Nitrile. Note: Rigidcouplingsarerecommendedforvacuumandlowtemperatureapplications.

Reducing Coupling The reducing gasket is provided with ribs used to position the larger pipe so that the sealing lip is located on the sealing surface of the pipe. This gasket is used only with the Figure 716 GRINNELL Reducing Coupling and is available in Grade “E” EPDM and Grade “T” Nitrile.

Reducing couplings are not recommended for low temperature applications .

Flange Adapter This gasket is specifically designed for use with the Figure 71 Flange Adapter. The gasket has an optimum amount of rubber to provide a dependable seal between both the pipe and mating surface. The gasket is available in Grade “E” EPDM and Grade “T” Nitrile.

Mechanical Tee and Strap The gasket provides a compression type seal, which is designed to conform to the exterior curve (OD) of the pipe. This design is unique to both the Figure 730 Mechanical Tee (threaded and grooved) and Figure 40-5 Strap. The gasket is available in Grade “E” EPDM and Grade “T” Nitrile.

Note: Whenusedinlowtemperatureapplications,useapetroleum-freesiliconebasedlubricant,otherwisenolubricantisrequiredonMechanicalTeeandStrapgaskets.

outlet CouplingThis gasket is specifically designed for use with the GRINNELL Figure 702 Outlet Coupling.

Plain End CouplingThis gasket is designed for use with the Figure 909 Plain End Coupling.

GRINNELL gaskets are designed exclusively for use with GRINNELL manufactured coupling housings. The mixing of other manufacturer’s gaskets or housings with GRINNELL gaskets or housings may result in pipe joint leakage or failure and will void the GRINNELL Mechanical Products limited warranty.

Gasket StylesTech Data Sheet: G610

Gask

ets

GASkETS


The Gasket Recommendation Table has been developed to assure maximum service life. The table was developed from information supplied by the material manufacturers of the elastomer, technical reference literature, and testing conducted by GRINNELL Mechanical Products.

In evaluating the gasket grade for intended service applications the following consideration must be reviewed: system operating temperature, fluid or solution concentration, and duration of service.

All gasket recommendations are based on a temperature of 21°C (70°F) unless otherwise noted.

Technical and Engineering Services should be consulted (Phone 1300 725 688, Fax +61 3 9933 6204) if combinations of service solutions are being considered.

Contact GRINNELL Mechanical Products for recommendations for services not listed.

Gasket recommendations apply to GRINNELL gaskets and valves only.

Grade Temperature Range

Compound Colour Code

General Service Application

“E”-34°C to 110°C

(-30°F to 230°F)EPDM Green

Hot water, dilute acids, alkalies, oil free air, and many chemical services not involving petroleum products.Excellent oxidation resistance.Not for use with hydrocarbons.Not recommended for steam service.

“E” Tri- Seal

-34°C to 110°C(-30°F to 230°F)

EPDM Green

Hot water, dilute acids, alkalies, and many chemical services not involving petroleum products.Excellent oxidation resistance.Not for use with hydrocarbons.Recommended for low temperature and vacuum services.

“T” and “T” Tri- Seal

-29°C to 82°C(-20°F to 180°F)

Nitrile Orange

Petroleum products, vegetable oils, mineral oils, and air with oils.High-End oil vapour temperature, decrease to 66°C (150°F).Not recommended for hot water systems.Not recommended for hot dry air systems.

“O” and “O” Tri- Seal

-7°C to 149°C(+20°F to 300°F)

Fluoroelastomer Blue Oxidising acids, petroleum products, hydraulic fluids, lubricants, halogenated hydrocarbons.

“L”-34°C to 177°C

(-30°F to 350°F )Silicone * Red Gasket Air without hydrocarbons, dry heat.

“EN” Tri-Seal for Copper Tubing

Potable Water up to 82°C (180°F) EPDM Copper

CTS Sizes Only, NSF 61 Approved for potable water.Not recommended for hydrocarbons.

“EN” and “EN” Tri-Seal for IPS Pipe

Potable Water up to 82°C (180°F) EPDM

Green/Yellow Stripe

IPS Sizes Only, NSF 61 Approved for potable water.Not recommended for hydrocarbons.

*Topreventgasketfromdeteriorating,NEVERusesilicone-basedlubricantswithGrade“L”Siliconegaskets.ForlocalcountrypotablewaterapprovalscontactGRINNELLMechanicalProducts

GRINNELL Gasket Grade & RecommendationsTech Data Sheet: G610

Gask

ets

GASkETS


• Contact GRINNELL Mechanical Products for an engineering evaluation and recommendation where the gasket grade is shown in parenthesis.

• Specify gasket grade when ordering.

• For vacuum or low temperature systems, use tri-seal gasket. For low temperature applications, use a petroleum-free silicone lubricant.

• Check gasket colour code to be certain it is recommended for the service intended.

• Unless otherwise noted, all gasket listings are based upon a temperature of 21°C (70°F).

• For services not listed, contact GRINNELL Mechanical Products for recommendation.

• Where more than one gasket is shown, the preferred gasket grade is listed first.

Service Gasket Grade

Air, (no oil vapours) Temp. -34°C to 110°C (-30°F to 230°F) EAir, Oil Vapour Temp. -29°C to 66°C (-20°F to 150°F) TWater, Temp. to 110°C (230°F)(NOT RECOMMENDED FOR STEAM SERVICE)

E

Water, Acid Mine E/TWater, Chlorine EWater, Deionized EWater, Seawater EWater, Waste (NO PETROLEUM PRODUCTS) E

Chemical Composition

Gasket Grade

ASTM #3 Oil TAcetaldehyde EAcetamide TAcetic Acid up to 10% 100°C/38°C

E

Acetic Acid up to 10-50% 100°C/38°C

L

Acetic Acid, Glacial 100°C/38°C

L

Acetic Anhydride EAcetone EAcetonitrile TAcetylene E/TAdipic Acid TAlkalis EAllyl Alcohol to 96% EAlum Sulphuric Acid OAlums E/TAluminium Chloride E/TAluminium Fluoride E/TAluminium Hydroxide E Aluminium Nitrate E/TAluminium Oxychloride

T

Aluminium Phosphate

E

Aluminium Salts TAluminium Sulphate E/TAmmonia Gas, Cold EAmmonia, Liquid EAmmonium Bifluoride

T

Ammonium Carbonate

E


Gasket Grade

Ammonium Chloride E/TAmmonium Fluoride EAmmonium Hydroxide

E

Ammonium Metaphosphate

E

Ammonium Nitrate TAmmonium Nitrite EAmmonium Persulphate, to 10%

E

Ammonium Phosphate

T

Ammonium Sulfamate

T

Ammonium Sulphate E/TAmmonium Sulphide EAmmonium Thiocyanate

E

Amyl Acetate EAmyl Alcohol EAmyl Chloronaphthalene

T

Anderol OAniline EAniline Dyes EAniline Hydrochloride

E

Aniline Oil EAntimony Chloride EAntimony Trichloride EArgon Gas E/OAroclor(S) OArsenic Acid, to 75% TBarium Carbonate E


Gasket Grade

Barium Chloride E/TBarium Hydroxide E/TBarium Sulphide TBenzaldehyde EBenzene OBenzine (see Petroleum Ether)

O

Benzoic Acid EBenzol OBenzyl Alcohol EBenzyl Benzoate EBlack Sulphate Liquor

T

Blast Furnace Gas TBleach,12% Active EBorax Solutions EBordeaux Mixture EBoric Acid E/TBromine OButane Gas TButanol (see Butyl Alcohol)

E/T

Butyl Acetate Ricinoleate

E

Butyl Alcohol E/TButyl “Cellosolve Adipate”

E/T

Butyl Phenol EButyl Stearate TButylene TButylene Glycol ECalcium Acetate TCalcium Bisulphite TCalcium Chloride E/T


Gasket Grade

Calcium Hydroxide E/TCalcium Hypochlorite

E

Calcium Hypochloride

E

Calcium Nitrate E/TCalcium Sulphate E/TCalcium Sulphide E/TCaliche Liquors TCarbitol E/TCarbonic Acid, Phenol

O

Carbon Bisulphide OCarbon Dioxide, Dry E/TCarbon Dioxide, Wet E/TCarbon Disulphide OCarbon Monoxide ECarbon Tetrachloride OCaustic Potash E/TCellosolve Acetate ECellosolve (Alcohol Ether)

E

Cellulose Acetate ECellulube 220 (Tri-Aryl-Phosphate)

E

Cellulube Hydraulic Fluids

E

China Wood Oil, Tung Oil

T

Chloric Acid to 20% EChlorine, Dry OChlorine, Water 4000 PPM (max.)

E

Chlorinated Paraffin (Chlorocosane)

T

Gasket Air, Water & Chemical Recommendations(Page 1 of 3)


Gask

ets

GASkETS



Gasket Grade

Chloroacetic Acid EChloroacetone EChlorobenzene OChloroform OChrome Alum TChrome Plating Solutions

O

Chromic Acid, to 25%

O

Citric Acid E/TCoke Oven Gas T/OCopper Chloride TCopper Cyanide E/TCopper Fluoride ECopper Nitrate E/TCopper Sulphate E/TCreosol, Cresylic Acid

O

Creosote, Coal Tar OCreosote, Wood OCupric Fluoride TCupric Sulphate TCyclohexane (Alicyclic Hydrocarbon)

O

Cyclohexanone EDeionized Water EDextrim TDibutyl Phthalate EDichloro Difloro Methane

T

Dicyclohexylamine TDiesel Oil TDiethyl Ether TDiethyl Sebacate EDiethylamine TDiethylene Glycol E/TDigester Gas TDimethylamine TDioctyl Phthalate E Dioxane EDipentene (Terpene-Hydrocarbon)

T

Dipropylene Glycol TDowtherm A ODowtherm E ODowtherm SR-1 T/EEthane EEthanolamine EEthyl Acetoacetate EEthyl Acrylate LEthyl Alcohol EEthyl Cellulose EEthyl “Cellusolve” E


Gasket Grade

Ethyl Chloride EEthyl Ether TEthyl Oxalate EEthyl Silicate TEthylene Chlorohydrin

E

Ethylene Diamine TEthylene Dichloride (Dichloroethane)

O

Ethylene Glycol E/TFerric Chloride, to 35%

E/T

Ferric Chloride, Saturated

E

Ferric Hydroxide EFerric Sulphate TFire Fighting Foam Concentrate

E/O

Fluboric Acid E/TFly Ash EFM200 HFC-227ea

E

Fog Oil TFormaldehyde E/TFormamide E/TFormic Acid EFreon 11, 130°F/54°C TFreon 12, 130°F/54°C

T

Freon 113 130°F/54°C

T

Freon 114,130°F/54°C TFreon 134a,176°/80°C

E/T

Fructose E/TFuel Oil TFumaric Acid EFurfuryl Alcohol EGasoline, Refined TGasoline, Refined, Unleaded

O

Glue E/TGlycerin E/TGlycerol E/TGlycol E/TGlycolic Acid EGrease TGreen Sulphate Liquor

T

Halon 1301 EHeptane THexaldehyde EHexane THexanol Tertiary THexyl Alcohol T


Gasket Grade

Hexylene Glycol THydrobromic Acid, to 40%

E

Hydrochloric Acid, to 36%, 75°F/24°C

E

Hydrochloric Acid, to 36%,158°F/70°C

O

Hydrocyanic Acid EHydrofluoric Acid, to 75%, 75°F/24°C

O

Hydrofluosilicic Acid EHydrogen Gas, Cold E/THydrogen Gas, Hot EHydrogen Peroxide, to 50%

L

Hydrogen Peroxide, to 90%

O

Hydrogen Sulphide EHydroquinone THydroxylamine Sulphate

E

Hypochlorous Acid, Dilute

E

Iso Octane, 100°F/38°C

T

Isobutyl Alcohol EIsopropyl Acetate EIsopropyl Alcohol EIsopropyl Ether TJP-3 TJP-4 TJP-5, 6, 7, 8 TKerosene TKetones ELatex (1% Styrene & Butadiene)

O

Lauric Acid TLavender Oil TLead Acetate TLead Chloride ELead Sulphate TLime and H2O E/TLinoleic Acid OLithium Bromide TLithium Chloride TLubricating Oil, Refined

T

Lubricating Oil, Sour TLubricating Oil, to 150°F/66°C

T

Magnesium Chloride E/TMagnesium Hydroxide

E/T

Magnesium Sulphate E/TMaleic Acid TMalic Acid T


Gasket Grade

Mercuric Chloride E/TMercuric Cyanide TMercurous Nitrate E/TMercury TMethane TMethyl Alcohol, Methanol

E/T

Methyl Chloride OMethyl Ethyl Ketone EMethyl Isobutyl Carbinol

E

Methylene Chloride OMethylene Dichloride 100°F/38°C

O

MIL-L7808 OMIL-05606 OMIL-08515 OMineral Oils TNaptha, 160°F/71°C ONapthenic Acid TNatural Gas TNevoil ENickel Chloride E/TNickel Plating Solution 125°F/52°C

E/T

Nickel Sulphate E/TNitric Acid to 10%, 75°F/24°C

E

Nitric Acid, 10-50%, 75°F/24°C

O

Nitric Acid, 50-86%, 75°F/24°C

O

Nitric Acid, Red Fuming

O

Nitromethane ENitrous Oxide ENOVEC 1230 FK-5-1-12

E

Ogisogiric Acid, to 75%, 150°F/66°C

O

Oil, Crude Sour TOil, Motor TOleic Acid TOronite 8200 Silicate Ester Fluid

O

Orthodichloro- benzene

O

OS-45 Silicate Ester Fluid

O

OS-45-1 OOxalic Acid EOxygen, Cold EOzone EPalmitic Acid TPentane TPerchloroethylene O



Gask

ets

GASkETS



Gasket Grade

Petroleum Ether (see Benzene)

O

Petroleum Oils TPhenol (Carbolic Acid)

O

Phenylhydrazine EPhenylhydrazine Hydrochloride

E

Phosphate Ester EPhosphoric Acid, to 75% and 70°F

E/T

Phosphoric Acid, to 85% and 200°F

O

Photographic Solutions

T

Phthalic Anhydride EPolybutene TPolyvinyl Acetate, Solid (In Liquid State is 50% solution of Methanol or 60% solution of H2O)

E

Potassium Alum E/TPotassium Bicarbonate

E/T

Potassium Bichromate

E/T

Potassium Borate EPotassium Bromate EPotassium Bromide E/TPotassium Carbonate

E/T

Potassium Chlorate EPotassium Chloride EPotassium Chromate TPotassium Cyanide E/TPotassium Dichromate

E

Potassium Ferricyanide

E

Potassium Ferrocyanide

E

Potassium Fluoride EPotassium Hydroxide TPotassium Nitrate TPotassium Perborate EPotassium Perchlorate

T

Potassium Permanganate,Saturated to 10%

E

Potassium PermaganateSaturate 10-25%

E

Potassium Persulphate

T


Gasket Grade

Potassium Silicate E/T

Potassium Sulphate T

Prestone T

Propane Gas T

Propanol E

Propargyl Alcohol E

Propyl Alcohol T

Propylene Dichloride L

Propylene Glycol E

Pyranol 1467 T

Pyranol 1476 T

Pyroguard “C” T

Pyroguard “D” T

Pyroguard 55 E

Pyrrole E

Ref. Fuel (70 ISO Octane, 30 Toluene)

T

Rosin Oil T

Salicylic Acid E

Secondary Butyl Alcohol

T

Sewage E/T

Silver Nitrate E

Silver Sulphate E

Skydrol, 200°F/93°C L

Skydrol 500 Phosphate Ester

E

Soap Solutions E/T

Soda Ash, Sodium Carbonate

E/T

Sodium Acetate E

Sodium Alum T

Sodium Benzoate E

Sodium Bicarbonate E/T

Sodium Bisulphate E/T

Sodium Bisulfite (Black Liquor)

E/T

Sodium Bromide E/T

Sodium Carbonate E/T

Sodium Chlorate E

Sodium Chloride E/T

Sodium Cyanide E/T

Sodium Dichromate, to 20%

E/T

Sodium Ferricyanide E/T

Sodium Ferrocyanide

E/T

Sodium Fluoride E/T

Sodium Hydro Sulphide

T

Sodium Hydroxide to 50%

E

Sodium Hypochlorite, to 20%

E


Gasket Grade

Sodium Metaphosphate

T

Sodium Nitrate E

Sodium Nitrite E/T

Sodium Perborate E

Sodium Peroxide E

Sodium Phosphate, Dibasic

T

Sodium Phosphate, Monobasic

T

Sodium Phosphate, Tribasic

T

Sodium Silicate T

Sodium Sulphate E/T

Sodium Sulphide T

Sodium Sulfite Solution, to 20%

T

Sodium Thiosulphate, “Hypo”

T

Sohovis 47 T

Sohovis 78 T

Solvasol #1 T

Solvasol #2 T

Solvasol #3 T

Solvasol #73 T

Spindle Oil T

Stannic Chloride T

Stannous Chloride, to 15%

T

Starch T

Stearic Acid T

Stoddard Solvent T

Styrene O

Sulfonic Acid E

Sulphite Acid Liquor E

Sulphur E

Sulphur Chloride O

Sulphur Dioxide, Dry E/T

Sulphur Dioxide, Liquid

E

Sulphur Trioxide, Dry O

Sulphuric Acid, to 25%, 150°F/66°C

E

Sulphuric Acid, 25-50%, 200°F/93°C

O

Sulphuric Acid, 50-95%, 150°F/66°C

O

Sulphuric Acid, Fuming

O

Sulphuric Acid, Oleum

O

Sulphurous Acid O

Tall Oil T


Gasket Grade

Tanning Liquors (50g. alum. solution, 50g. dichromate solution)

T

Tartaric Acid ETertiary Butyl Alcohol

E/T

Tetrabutyl Titanate ETetrachloroethylene OThionyl Chloride TTerpineol TTitanium Tetrachloride

O

Toluene, 30% TTransmission Fluid, Type A

O

Triacetin TTrichloroethane OTrichloroethylene, to 200°F/93°

O

Tricresyl Phosphate ETriethanolamine E/TTrisodium Phosphate ETung Oil TTurbo Oil #15 Diester Lubricant

O

Turpentine TUrea TVegetable Oils TVinyl Acetate EVi-Pex TWater, to 150°F/66°C E/TWater, to 200°F/93°C EWater, to 230°F/110°C

E

Water, Acid Mine E/TWater, Chlorine EWater, Deionized EWater, Potable ENWater, Seawater EWater, Waste E/TWhite Liquor EWood Oil TXylene OZinc Chloride, to 50%

E

Zinc Nitrate EZinc Sulphate E/T



Gask

ets

GASkETS


ApplicationLa-Co

IndustriesLubri-Joint

Dow Corning*7 Release Compound

(Silicone)

Chilled Water • •

Heating • •

Compressed Air • •

Drainage • •

Sewage • •

Low Temp./Vacuum • •

Fire Protection • •

During installation of a GRINNELL Coupling, always lubricate the gasket. For couplings using the tri-seal gasket in a low temperature application, use a petroleum-free silicone based lubricant. For mechanical tees and straps when used in low temperature applications, use a petroleum-free silicone based lubricant, otherwise no lubricant is required.

GRINNELL Mechanical Piping Products recommends two kinds of lubricant:

• La-Co Industries Lubri-Joint

• Dow Corning* 7 Release Compound (Silicone)

Check lubricant chart to be certain the proper lubricant is recommended for the service intended. For information on health safety, contact GRINNELL Mechanical Products for Material Safety Data Sheets (MSDS).

Gasket Size

Lubri-Joint 946 ml (1 qt)

Container

Silicone 150 g (5.3 oz) Tube

32mm / 1¼" 650 116

40mm / 1½" 570 94

50mm / 2" 440 73

80mm / 3" 300 50

100mm / 4" 220 36

150mm / 6" 135 22

200mm / 8" 110 18

250mm / 10" 85 14

300mm / 12" 65 10

350mm / 14" 55 9

400mm / 16" 50 8

450mm / 18" 38 6

500mm / 20" 33 5

600mm / 24" 20 3

The table below will give an indication on the approximate number of gaskets which can be lubricated with one container of lubricant.

Available in:

• 0.95 Litre (1 Quart)

• 3.8 Litre (1 Gallon)

Silicone Gasket Lubricant recommended for use with tri-seal gasket (Dow Corning D.C. No. 7)* available in:

• 150 grammes (5.3 oz) Tube

• 3.6 kg (8 lb) Can

* DowCorningisaregisteredtrademarkofDowCorningCorporation.

GRINNELL Gasket LubricantsTech Data Sheet: G610

prep

arat

ion

equi

pMen

tpREpARATiON EquipmENT


Automated Roll Groovers

Page – 151

Portable Cut Groovers

Page – 151

Portable Roll Groovers

Page – 152

Field Portable Roll GrooversPage – 152

Pipe Support Stands

Page – 153

Hole Cutting Tools

Page – 153

Pipe TapePage – 153

Preparation Equipment Pictorial Table of Contents

prep

arat

ion

equi

pMen

t

pREpARATiON EquipmENT


(1) The maximum allowable tolerances for IPS Pipe from square cut ends is: 0.76mm (0.030") for sizes 32mm – 80mm (1¼" thru 3"); 1.14mm (0.045") for sizes 100mm – 150mm (4" – 6"); and 1.52mm (0.060") for sizes 200mm (8") and above.

(2) Gasket Seating Surface “A” must be free from score marks, ridges, indentations, projections, loose paint, scale, dirt chips, grease, rust, etc. that would prevent a positive seal.

(3) Groove Diameter “C” must be of uniform depth around the circumference of the pipe.

(4) Groove Depth “D” is a reference dimension only. The Groove Diameter “C” must be maintained.

(5) Minimum Wall Thickness “T” is the minimum wall thickness that should be roll grooved.

(6) Maximum allowable pipe end flare diameter is measured at the pipe end diameter.

NominalPipeSizemm

Inches

Pipe O.D.mm Inches A

±0.76mm±0.030"

mmInches

B±0.76mm±0.030"

mmInches

CGroove Diameter

mmInches

DGroove Depth

(ref. only)mm

Inches

TMinimum

Wallmm

Inches

Maximum Allow Flare

Diameter mm

Inches

O.D.Tolerance

+ - ActualTol.

+0.00032 42.4 0.41 0.41 15.88 7.14 38.99 -0.38 1.60 1.65 44.961¼ 1.660 0.016 0.016 0.625 0.281 1.535 -0.015 0.062 0.065 1.77

40 48.3 0.48 0.48 15.88 7.14 45.09 -0.38 1.60 1.65 51.051½ 1.900 0.019 0.019 0.625 0.281 1.775 -0.015 0.062 0.065 2.01

50 60.3 0.61 0.61 15.88 8.74 57.15 -0.38 1.60 1.65 62.992 2.375 0.024 0.024 0.625 0.344 2.250 -0.015 0.062 0.065 2.48

65 73.0 0.74 0.74 15.88 8.74 69.09 -0.46 1.98 2.11 75.692½ 2.875 0.029 0.029 0.625 0.344 2.720 -0.018 0.078 0.083 2.98

65 76.1 0.76 0.76 15.88 8.74 72.26 -0.46 1.93 2.11 78.74– 3.000 0.030 0.030 0.625 0.344 2.845 -0.018 0.076 0.083 3.10

80 88.9 0.89 0.79 15.88 8.74 84.94 -0.46 1.98 2.11 91.443 3.500 0.035 0.031 0.625 0.344 3.344 -0.018 0.078 0.083 3.60

100 114.3 1.14 0.79 15.88 8.74 110.08 -0.51 2.11 2.11 116.844 4.500 0.045 0.031 0.625 0.344 4.334 -0.020 0.083 0.083 4.60

125 139.7 1.42 0.79 15.88 8.74 135.48 -0.56 2.11 2.77 142.24– 5.500 0.056 0.031 0.625 0.344 5.334 -0.022 0.083 0.109 5.60

125 141.3 1.42 0.79 15.88 8.74 137.03 -0.56 2.13 2.77 143.765 5.563 0.056 0.031 0.625 0.344 5.395 -0.022 0.084 0.109 5.66

150 165.1 1.60 0.79 15.88 8.74 160.78 -0.56 2.16 2.77 167.64– 6.500 0.063 0.031 0.625 0.344 6.330 -0.022 0.085 0.109 6.60

150 168.3 1.60 0.79 15.88 8.74 163.96 -0.56 2.16 2.77 170.946 6.625 0.063 0.031 0.625 0.344 6.455 -0.022 0.085 0.109 6.73

200 219.1 1.60 0.79 19.05 11.91 214.40 -0.64 2.34 2.77 223.528 8.625 0.063 0.031 0.750 0.469 8.441 -0.025 0.092 0.109 8.80

250 273.0 1.60 0.79 19.05 11.91 268.27 -0.69 2.39 3.40 277.3710 10.750 0.063 0.031 0.750 0.469 10.562 -0.027 0.094 0.134 10.92

300 323.9 1.60 0.79 19.05 11.91 318.19 -0.76 2.77 3.96 328.1712 12.750 0.063 0.031 0.750 0.469 12.531 -0.030 0.109 0.156 12.92

350 355.6 1.60 0.79 23.83 11.91 350.04 -0.76 2.77 3.96 358.1414 14.000 0.063 0.031 0.938 0.469 13.781 -0.030 0.109 0.156 14.10

400 406.4 1.60 0.79 23.83 11.91 400.84 -0.76 2.77 4.19 408.9416 16.000 0.063 0.031 0.938 0.469 157.81 -0.030 0.109 0.165 16.10

450 457.2 1.60 0.79 25.40 11.91 451.64 -0.76 2.77 4.19 461.2618 18.000 0.063 0.031 1.000 0.469 17.781 -0.030 0.109 0.165 18.16

500 508.0 1.60 0.79 25.40 11.91 502.44 -0.76 2.77 4.78 512.0620 20.000 0.063 0.031 1.000 0.469 19.781 -0.030 0.109 0.188 20.16

600 609.6 1.60 0.79 25.40 12.70 600.86 -0.76 4.37 5.54 614.6824 24.000 0.063 0.031 1.000 0.500 23.656 -0.030 0.172 0.218 24.20

AB

T

COD

D

Roll Groove Standard Specification for Steel & other IPS PipeTech Data Sheet: G710

prep

arat

ion

equi

pMen



(1) The maximum allowable tolerances for IPS Pipe from square cut ends is: 0.76mm (0.030") for sizes 32mm – 80mm (1¼" thru 3"); 1.14mm (0.045") for sizes 100mm – 150mm (4" – 6"); and 1.52mm (0.060") for sizes 200mm (8") and above.

(2) Gasket Seating Surface “A” must be free from score marks, ridges, indentations, projections, loose paint, scale, dirt chips, grease, rust, etc. that would prevent a positive seal.

(3) Groove Diameter “C” must be of uniform depth around the circumference of the pipe.

(4) Groove Depth “D” is a reference dimension only. The Groove Diameter “C” must be maintained.

(5) Minimum Wall Thickness “T” is the minimum wall thickness that should be cut grooved.

TB

D

COD

A

NominalPipeSizemm

Inches

Pipe O.D.mm

Inches

A±0.76mm±0.030"

mmInches

B±0.76mm±0.030"

mmInches

CGroove Diameter

mmInches

D Groove Depth

(ref. only)mm

Inches

T Minimum

Wallmm

InchesO.D.Tolerance

+ - ActualTol.

+0.00032 42.4 0.41 0.41 15.88 7.95 38.99 -0.38 1.60 1.601¼ 1.660 0.016 0.016 0.625 0.313 1.535 -0.015 0.062 0.062

40 48.3 0.48 0.48 15.88 7.95 45.09 -0.38 1.60 1.601½ 1.900 0.019 0.019 0.625 0.313 1.775 -0.015 0.062 0.062

50 60.3 0.61 0.61 15.88 7.95 57.15 -0.38 1.60 1.602 2.375 0.024 0.024 0.625 0.313 2.250 -0.015 0.062 0.062

65 73.0 0.74 0.74 15.88 7.95 69.09 -0.46 1.98 1.982½ 2.875 0.029 0.029 0.625 0.313 2.720 -0.018 0.078 0.078

65 76.1 0.76 0.76 15.88 7.95 72.26 -0.46 1.93 1.93– 3.000 0.030 0.030 0.625 0.313 2.845 -0.018 0.076 0.076

80 88.9 0.89 0.79 15.88 7.95 84.94 -0.46 1.98 1.983 3.500 0.035 0.031 0.625 0.313 3.344 -0.018 0.078 0.078

100 114.3 1.14 0.79 15.88 9.53 110.08 -0.51 2.11 2.114 4.500 0.045 0.031 0.625 0.375 4.334 -0.020 0.083 0.083

125 139.7 1.42 0.79 15.88 9.53 135.48 -0.51 2.11 2.11– 5.500 0.056 0.031 0.625 0.375 5.334 -0.020 0.083 0.083

125 141.3 1.42 0.79 15.88 9.53 137.03 -0.56 2.13 2.135 5.563 0.056 0.031 0.625 0.375 5.395 -0.022 0.084 0.084

150 165.1 1.60 0.79 15.88 9.53 160.78 -0.56 2.16 2.16– 6.500 0.063 0.031 0.625 0.375 6.330 -0.022 0.085 0.085

150 168.3 1.60 0.79 15.88 9.53 163.96 -0.56 2.16 2.166 6.625 0.063 0.031 0.625 0.375 6.455 -0.022 0.085 0.085

200 219.1 1.60 0.79 19.05 11.13 214.40 -0.64 2.34 2.348 8.625 0.063 0.031 0.750 0.438 8.441 -0.025 0.092 0.092

250 273.0 1.60 0.79 19.05 12.70 268.27 -0.69 2.39 2.3910 10.750 0.063 0.031 0.750 0.500 10.562 -0.027 0.094 0.094

300 323.9 1.60 0.79 19.05 12.70 318.19 -0.76 2.77 2.7712 12.750 0.063 0.031 0.750 0.500 12.531 -0.030 0.109 0.109

350 355.6 1.60 0.79 23.83 12.70 350.04 -0.76 2.77 7.1414 14.000 0.063 0.031 0.938 0.500 13.781 -0.030 0.109 0.281

400 406.4 1.60 0.79 23.83 12.70 400.84 -0.76 2.77 7.9216 16.000 0.063 0.031 0.938 0.500 157.81 -0.030 0.109 0.312

450 457.2 1.60 0.79 25.40 12.70 451.64 -0.76 2.77 7.9218 18.000 0.063 0.031 1.000 0.500 17.781 -0.030 0.109 0.312

500 508.0 1.60 0.79 25.40 12.70 502.44 -0.76 2.77 7.9220 20.000 0.063 0.031 1.000 0.500 19.781 -0.030 0.109 0.312

600 609.6 1.60 0.79 25.40 14.27 600.86 -0.76 4.37 9.5324 24.000 0.063 0.031 1.000 0.562 23.656 -0.030 0.172 0.375

Cut Groove Standard Specification for Steel & other IPS PipeTech Data Sheet: G710

prep

arat

ion

equi

pMen

t



Grooving EquipmentExample equipment is shown on the next three pages. Additional grooving equipment and equipment with APAC electrical requirements are also available. Contact GRINNELL Mechanical Products for more information.

Roll grooving machines are available for rent. Contact your GRINNELL Mechanical Products representative for details and availability.

• Schedule 40 50mm – 300mm (2" – 12")

• Schedule 80 65mm – 200mm (2½" – 8")

• Collet chucks for 250mm and 300mm (10" and 12") pipe available

• Tooling for cut grooving ductile iron pipe also available

• Special collet chucks for non-standard dimension pipe can be suppliedSTANDARD EquIPMENT

Collet Chucks for 50mm – 200mm (2" – 8"), 4 High Speed Steel Grooving Blades, Groove Gauge, Shipping/Storage Box

Automated Roll Grooving Machines are designed for use in the shop. The machines have a self-contained hydraulic system that produces consistent quality roll grooves in high production runs.

• Schedule 40, 32mm – 300mm (11⁄4" – 12")

• Schedule 10, 40mm – 300mm (11⁄2" – 12")

• Standard Wall, 300mm – 600mm (12" – 24")

• Pipe rotation speed of 30 RPMSTANDARD EquIPMENT

Electric Drive Motor, Limit Switch for Depth Gauging, Groove Depth Gauge, Hydraulic Pump, Nipple Bracket, Rolls As Specified in Price List, Guards, Foot Switch

Automated Roll Groovers

Portable Cut Groovers

prep

arat

ion

equi

pMen



• Schedule 40, 32mm – 300mm (11⁄4" – 12")

• Manual grooving with ratchet hand crank


• Self-containedSTANDARD EquIPMENT

Multi-Function Ratchet Hand CrankEquipment is available with APAC electrical requirements

oPTIoNAL EquIPMENTTop and Bottom Rolls Steel Pipe

• Schedule 40 Capacity 32mm – 300mm (11⁄4" – 12")

• Schedule 10 Capacity 25mm – 300mm (1" – 12")


• Hydraulic pressure at roller is 55,158 kPa (8,000 psi) maxSTANDARD EquIPMENT

Top & Bottom Rolls 25mm – 300mm (1" – 12"), Hydraulic Hand Pump, Grooved Depth Gauge and Guards

Equipment is available with APAC electrical requirements

Portable Roll Groovers

Field Portable Roll Groovers

prep

arat

ion

equi

pMen

t



Capacity: 25mm – 100mm (1" – 4") Pipe; 272 kg (600 lbs) max

A 559mm (22") diameter base with 51mm (2") column gives this stand plenty of strength for supporting any pipe size in its size range. The saddle has two roller bar bearings for free rotation of the pipe and absorbs vibration to ensure a smooth, uniform groove. Saddle height is adjustable over a 254mm (10") range.

Model GRNTAPE was developed to check the groove diameter in roll-grooved pipe. The tape measures the groove in steel pipe 25mm – 300mm (1" – 12").

The loop extending from the metal housing consists of a clear-plastic window with a vertical indicator line and the adjustable metal measuring tape. The adjustable measuring tape has groove tolerance blocks (thick black lines) that are visible through the plastic view window. The groove tolerance blocks are marked with the associated pipe diameters.

Note: The GRINNELL roll pipe measuring tape is not a calibrated tool and is to be used for reference only. To ensure accuracy, always check grooved pipe dimensions with calibrated gauges or callipers. For roll groove standard specifications for steel pipe and other IPS pipe, refer to Data Sheet G710 or TFP1898.

• Solid alloy aluminium construction

• Circuit breaker assures no safety hazard to the operator or machine

• Chain clamp is standard on all units and clamps to pipe diameters

• Optional speed toggle clamps; 32mm – 150mm (11⁄4" – 6") pipe

• Oil feed

Pipe Support Stands

Hole Cutting Tools

Pipe Tape

prep

arat

ion

equi

pMen



Desi

Gn D

ata

pRESSuRE & DESiGN DATA


Rigid JointsGRINNELL Rigid Couplings provide rigid gripping of the pipe. They are designed to bring the pipe ends close together and to ensure the coupling clamps firmly onto the pipe OD and the bottom of the grooves. Because rigid couplings clamp around the entire pipe surface, they provide resistance to flexural and torsional loads and therefore permit longer spacing to ASME/ANSI B31.1 (Power Piping) and ASME/ANSI B39.1 (Building Services) requirements.

Flexible JointsGRINNELL Flexible Couplings act as an “expansion joint”, allowing linear and angular movement of the pipe. They are designed with the coupling keys engaging the pipe without gripping on the bottom of the grooves, while still providing for a restrained mechanical joint. This is particularly useful to allow for pipe expansion/contraction and piping misalignment.

Angular DeflectionGRINNELL Flexible Couplings are capable of accommodating angular deflection.

Expansion/ContractionGRINNELL Flexible Couplings are capable of accommodating pipe thermal movements provided they are properly gapped and a sufficient quantity of flexible couplings are used. Note that flexible couplings will not accommodate both full maximum linear movement and the maximum available angular deflection concurrently at the same joint.

If it is desired to have both deflection and linear movement available, then the system should have sufficient flexible joints to accommodate the requirement.

Deflection

Pipe Sizemm

Inches

Maximum Pipe DeflectionReduction

42.4 – 88.950%

1¼ – 3

114.3 – 610.025%

4 – 24


For thermal expansion with flexible couplings, the pipe ends at each joint should be fully gapped to the maximum amount. This can be accomplished by pressurising the system and then anchoring the system.

For thermal contraction with flexible couplings, the pipe ends at each joint should be fully butted. The system can then be anchored in place to prevent the pipe ends from opening up to the maximum end gap when pressurised.

Pipe Ends Butted for Contraction

End Gap Reduction

Pipe Sizemm

Inches

Maximum Pipe End Gap

42.4 – 88.950%

1¼ – 3

114.3 – 610.025%

4 – 24

Pipe End Movements

Pipe Size mm

Inches

Cut Grooved

mm Inches

Roll Grooved

mm Inches

42.4 – 88.9 0 – 1.6 0 – 0.8

1¼ – 3 0 – 0.063 0 – 0.031

114.3 – 610.0 0 – 2.4 0 – 2.4

4 – 24 0 – 0.188 0 – 0.094

*Rollgroovedjointsprovidehalftheavailablemovementofcutgroovedjoints.

End Gap

Pipe Ends Gapped for Expansion

For design purposes, the maximum pipe end gap should be reduced to account for field practises as follows:

The following values should be used as available pipe end movements for GRINNELL Figure 705, 707, and 716 Flexible Couplings:

The deflection published is a maximum value. For design purposes the maximum deflection should be reduced to account for field practises as shown:

Linear Movement (Flexible Couplings)

Desi

Gn D

ata



Activation Force

Pipe Sizemm

Inches

Activation Force

N lbs

42.4 156

1-1⁄4 35

48.3 200

1-1⁄ 2 45

60.3 311

2 70

73.0 645

2-1⁄ 2 100

76.1mm 489

– 110

88.9 645

3 145

114.3 1068

4 240

141.3 1668

5 375

165.1mm 2224

– 500

168.3 2313

6 520

219.1 3914

8 880

273.0 6072

10 1365

323.9 8518

12 1915

The following guidelines are similar to any expansion joint:It is recommended that anchors be installed at changes of direction on the pipe lines to control the pipe movement. The thermal expansion/contraction in the piping system can be accommodated using GRINNELL Flexible Couplings. In designing anchoring systems, it is suggested that the following be taken into consideration:

• Pressure Thrusts

• Frictional Resistance of Any Guides or Supports

• Centrifugal Thrust Due to Velocity at Changes of Direction

• Activation Force Required to Compress or Expand a Flexible Coupling

Three methods are available as examples to accommodate thermal expansion/contraction:

(1) Design the system with rigid couplings and place expansion joints at the proper locations. Expansion joints may be a series of flexible grooved couplings of a sufficient quantity to accommodate the movement.

(2) Design the system with flexible and/or rigid couplings and allow the pipe to move in directions desired, with the use of anchors and guides if so required. With this method, it is important to ensure that movement at branch connections, changes of direction, equipment hookup, etc., will not cause damage or harmful stresses.

(3) Design the system with flexible couplings utilising the expansion/contraction capabilities of these products.

The following example illustrates this method:• 150mm (6") Schedule 40 steel pipe, roll grooved,

45.7m (150') long, anchored at each end

• Maximum Temperature = 93.3°C (200°F)

• Minimum Temperature = 4.4°C (40°F)

• Instal Temperature = 26.6°C (80°F)

Thermal Movement

AnchorPosition

ExpansionJoint Fig. 7550

IntermediateGuides

AnchorPosition

IntermediateGuides

IntermediateGuides

FlexibleCouplings

Desi

Gn D

ata



Thermal MovementDirections to calculate the number of couplings required to compensate for the thermal expansion and contraction of pipe (by example):

(1) Thermal ContractionUtilise the Thermal Expansion Table. Allowance for the minimum installation temperature, in this case 26.6°C to 4.4°C (80°F to 40°F), is calculated as:

26.6°C = 15.5mm per 30.5m 4.4°C = 7.6mm per 30.5m Difference = 7.9mm per 30.5m For 45.7m of pipe = 7.9mm x 1.5 = 11.9mm per 45.7m

(80°F = 0.61" per 100' 40°F = 0.30" per 100' Difference = 0.31" per 100' For 150' of pipe = 0.31" x 1.5 = 0.47" per 150')

(2) Thermal ExpansionUtilise the Thermal Expansion Table. Allowance for the minimum installation temperature, in this case 26.6°C to 93.3°C (80°F to 200°F), is calculated as:

93.3°C = 38.6mm per 30.5m26.6°C = 15.5mm per 30.5mDifference = 23.1mm per 30.5mFor 45.7m of pipe = 23.1mm x 1.5 = 34.5mm per 45.7m

(200°F = 1.52" per 100' 80°F = 0.61" per 100' Difference = 0.91" per 100' For 150' of pipe = 0.91 x 1.5 = 1.36" per 150')

(3) Couplings RequiredAvailable linear movement for a 150mm (6") Figure 707 Flexible Coupling on roll grooved pipe = 2.4mm (0.094") per coupling.

Fully butted together for contraction only. Therefore the number of Figure 707 Flexible Couplings required:

• 11.9mm / 2.4mm per coupling = 4.96 (0.47" / 0.094" per coupling = 5.0)

• Use 5 Figure 707 couplings for pipe contraction

(b) Fully gapped apart for expansion only. Therefore the number of Figure 707 Flexible Couplings required:

• 34.5mm / 2.4mm per coupling = 14.38 (1.36" / 0.094" per coupling = 14.47)

• Use 15 Figure 707 Flexible Couplings for pipe expansion

Thermal Expansion of Carbon Steel in milliMetres/30 .5 Metres (Inches/100 Feet)

Between -18°C (0°F) & Indicated Temperature

TemperatureC° F°

Thermal Expansionmm/30.5M

Inches/100 Feet-40 -7.62-40 -0.30

-34.4 -5.84-30 -0.23

-28.9 -3.81-20 -0.15

-23.3 -2.03-10 -0.08

-17.8 0.000 0.00

-12.2 2.0310 0.08

-6.7 3.8120 0.15-1.1 5.8430 0.234.4 7.6240 0.30

10.0 9.6550 0.38

15.6 11.6860 0.46

21.1 13.4670 0.53

26.7 15.5080 0.61

32.2 17.2790 0.68

37.8 19.30100 0.7643.3 21.34110 0.8448.9 23.11120 0.9154.4 25.15130 0.9960.0 26.92140 1.0665.6 28.96150 1.1471.1 30.99160 1.2276.7 32.77170 1.2982.2 34.80180 1.3787.8 36.58190 1.4493.3 38.61200 1.5298.9 40.64210 1.60

104.4 42.42220 1.67

110.0 44.45230 1.75

MeanCoef.ofthermalexpansion=0.00000633in/in/°FSource:ASMEB31.9

Desi

Gn D

ata



R =

L = (2) (R)

N =

R = Radius of curve

L = Pipe length

= Deflection from centreline, in degrees, for each coupling (see table)

N = Number of flexible couplings needed

T = Total deflection, in degrees, required

L(2) (Sin )

2

(Sin )2

T

GRINNELL Flexible Couplings provide for restrained joints and allow for deflection to aid where the pipe or equipment is misaligned.

Note that flexible couplings will not accommodate both full maximum linear movement and the maximum available angular deflection concurrently at the same joint.

Design Deflection for Roll Grooved Pipe

Deflection O (Roll Grooved Pipe)

Pipe SizeInchesmm

Figures705 & 707

42.41.08°

1-1⁄4

48.30.94°

1-1⁄2

60.30.75°

2

73.00.62°

2-1⁄2

76.1mm0.60°

–

88.90.51°

3

114.31.19°

4

141.30.97°

5

165.1mm0.83°

–

168.30.81°

6

219.10.63°

8

273.00.50°

10

323.90.42°

12

Incorporatestherecommendedsafetyfactorreductionforfieldpractises(50%forsizes32mm-80mm(1¼ – 3")and25%forsizes100mm-300mm(4 – 12")).

If it is desired to have both deflection and linear movement available, then the system should have sufficient flexible joints to accommodate the requirement.

Flexible couplings are also useful in laying out curved piping systems.

Misalignment & Deflection

Desi

Gn D

ata



All piping systems require that the support system accommodate the weight of the pipe, joint connections, fluid, and other system components. In addition, consideration may be necessary in reducing stresses, accommodating thermal expansion or contraction, building settlement, seismic movement, etc. The following tables provide guidelines for grooved steel piping products without concentrated loads between supports.

Pipe SizeInches

mm

Suggested Maximum Span Between Supports – Feet/metres

Water Service Air Service

I II I II

42.4 2.1 3.4 2.7 3.4

1-1⁄4 7 11 9 11

48.3 2.1 3.7 2.7 4.0

1-1⁄2 7 12 9 13

60.3 3.0 4.0 4.0 4.6

2 10 13 13 15

73.0 3.4 4.3 4.3 4.9

2-1⁄2 11 14 14 16

76.1mm 3.4 4.3 4.3 4.9

– 11 14 14 16

88.9 3.7 4.6 4.6 5.2

3 12 15 15 17

114.3 4.3 5.2 5.2 6.4

4 14 17 17 21

141.3 4.9 5.8 6.1 7.3

5 16 19 20 24

165.1mm 5.2 6.1 6.4 7.6

– 17 20 21 25

168.3 5.2 6.1 6.4 7.6

6 17 20 21 25

219.1 5.8 6.4 7.3 8.5

8 19 21 24 28

273.0 5.8 6.4 7.3 9.4

10 19 21 24 31

323.9 7.0 6.4 9.1 10.1

12 23 21 30 33

355.6 7.0 6.4 9.1 10.1

14 23 21 30 33

406.4 8.2 6.4 10.7 10.1

16 27 21 35 33

457.2 8.2 6.4 10.7 10.1

18 27 21 35 33

508.0 9.1 6.4 11.9 10.1

20 30 21 39 33

609.6 9.8 6.4 12.8 10.1

24 32 21 42 33

Number of Hangers Per Pipe Length

Pipe Sizemm

Inches

Pipe Length in Metres Feet

3.3 3.7 4.6 6.7 7.6 9.1 10.7 12.210 12 15 22 25 30 35 40

Average Number of Hangers Per Pipe Length

42.4 – 60.32 2 2 3 4 4 5 6

1-1⁄4 - 2

73.0 – 114.31 2 2 2 2 3 4 4

2-1⁄2 - 4

141.3 – 609.61 1 2 2 2 3 3 3

5 - 24

Flexible JointsFor pipe runs when linear movement is accommodated by the flexible coupling:

For pipe runs when linear movement is not required:

Note:TherequirementsofANSI,ASMEorothercodegroupsmayrequireadditionalsupports.

Distance Between Supports

Nominal Sizemm

Inches

Maximum Distance Between Supports

Metres Feet

42.4 - 48.3 3.7

1-1⁄4 - 1-1⁄2 12

60.3 - 219.1 4.6

2 - 8 15

273.0 - 323.9 4.9

10 - 12 16

355.6 - 406.4 5.5

14 - 16 18

457.2 - 609.6 6.1

18 - 24 20

Rigid JointsFor pipe runs with rigid couplings:

Pipe Support

Desi

Gn D

ata



Pipe SupportRotational MovementGRINNELL Flexible Couplings are suitable for use in seismic as well as mining applications. The inherent capability of the flexible coupling to allow for linear movement, angular deflection, and rotational movement make it an excellent choice for reducing stresses in a piping system and to increase pipe life in slurry applications.

For mining applications where the pipe needs to be rotated, the system should be depressurised. The pipe coupling bolts/nuts can be loosened, pipe rotated, the bolts/nuts re-tightened, and the system be put back in service.

Even distribution of pipe wear can be achieved with this method on the inner service of the pipe.

Note: Precautions are necessary to monitor pipe wall thickness to evaluate pressure capability of the pipe with reduced wall.

Linear MovementFlexible couplings are designed with the couplings keys engaging the pipe without gripping on the bottom of the groove while still providing for a restrained mechanical joint.

The inherent flexibility of the coupling must be considered when deciding on support arrangements for the piping system as movement can occur in more than one plane (linear movement, angular deflection, and rotational movement).

Upon system pressurisation, each pipe end within the flexible couplings will expand to the maximum published value. The coupling keys make contact with the face of the groove and restrain the joint. In piping systems, this movement will be accumulative.

Desi

Gn D

ata



Angular MovementSystem movement can be accommodated by providing for sufficient offset lengths. Temperature increases/decreases can further increase this movement.

When systems are anchored with partially deflected joints, the system can move to the fully deflected condition upon pressurisation resulting in the “snaking” of the piping system. Lightweight hangers may not be suitable to prevent the lateral motion.

Pipe SupportPipe hanger positioning is important when considering pipe “sagging” due to the flexible nature of the piping system. Proper positioning of hangers near the elbow, for example, should be considered.

The use of spring hangers or other methods can be considered to accommodate vibrations. Base supports, pressure thrust anchors, and pipe offsets can be used to direct pipe movement.

The use of rigid couplings can be considered to reduce the movement available with flexible couplings. Consideration of other methods of accommodation of pipe movements may be required.

Pipe Support

Desi

Gn D

ata



Vertical PipingRisers comprised of rigid couplings can be considered instead of welded or flanged systems. Where thermal movement exists, expansion joints and/or flexible couplings with offsets may be required.

When using flexible couplings, the movement that occurs in long lengths of piping needs to be considered. Each joint can move up to the maximum pipe end separation published. This movement can accumulate and result in the growth of the piping system, for example at the top. Offsets may be necessary.

Should the riser contain branch connections, the movement which occurs at these locations with flexible couplings will also need to be considered.

One solution would be to anchor the vertical piping at appropriate locations to prevent movement which can cause stresses at the branches or equipment. The use of rigid couplings can be an advantage.

As always, good piping practice should prevail. It is the designer’s responsibility to select products suitable for the intended service and to ensure that pressure ratings and performance data is not exceeded. Never remove any piping component or correct or modify any piping deficiencies without first depressurising and draining the system. Material and gasket selection should be verified to be compatible for the specific application.

Desi

Gn D

ata



Global Pipe Size DesignationsGRINNELL product data is utilised worldwide and all technical data is shown in both metric and imperial terms. The following chart shows a comparison between typical metric and IPS pipe sizes.

IMPoRTANT NoTE:Nominal designations are used where the actual OD of the pipe matches the ANSI size. Otherwise both the nominal and actual OD are listed.

China sizes are listed as actual OD in mm. ** China sizes are tubing sizes.

Nominal Size (DN) Outside Diameter (OD)

mm (Metric)

Inches (Imperial)

mm (Specification

Reference)

DIN mm

BS mm

ISO mm

JIS mm

ANSI Inches

GB China mm

India

IS 1239 IS3589

15 1⁄2 21.3mm DN 15 DN 15 DN 15 21.7mm 1⁄2 DN 15 DN 15 –20 3⁄4 26.7mm 26.9mm DN 20 DN 20 27.2mm 3⁄4 DN 20 DN 20 –25 1 33.4mm 33.7mm DN 25 DN 25 34mm 1 DN 25 DN 25 –32 1-1⁄4 42.2mm 42.4mm DN 32 DN 32 42.7mm 1 1⁄4 DN 32 DN 32 –40 1-1⁄2 48.3mm DN 40 DN 40 DN 40 48.6mm 1 1⁄2 DN 40 DN 40 –50 2 60.3mm DN 50 DN 50 DN 50 60.5mm 2 DN 50 DN 50 –

65 2-1⁄273.1mm – – – – 2 1⁄2 – – –

76.1mm BS/ISO 76.1mm 76.1mm 76.1mm 76.3mm – 76.1mm ** 76.1mm –

80 3 88.9mm DN 80 DN 80 DN 80 DN 80 3 DN 80 DN 80 –

90 3-1⁄2 101.6mm – – – – – – – –

100 4108mm China

(& old DIN)DIN 133mm – – – – 108mm ** – –

114.3mm DN 100 DN 100 DN 101 DN 100 4 DN 100 DN 100 –127mm – 127mm – – – – – – – –

125 5

133mm China – – – – – 133mm ** – –139.7mm BS/ISO DN 125 139.7mm 139.7mm 139.8mm – 139.7mm 139.7mm –

141.3mm – – – – 5 – – –152.4mm – 152.4mm – – – – – – – –

150 6

159mm China – – – – – 159mm –165.1mm JIS/BS – 165.1mm – 165.2mm – – 165.1mm –

168.3mm DN 150 – DN 150 – 6 DN 150 – DN 150175 – 193.7mm – – – – – – – 193.7mm

203.2mm – 203.2mm – – – – – – – –

200 8216.3mm JIS – – – 216.3mm – – – –

219.1mm DN 200 DN 200 DN 200 – 8 DN 200 DN 200 DN 200254mm – 254mm – – – – – – – –

250 10267.4mm JIS – – – 267.4mm – – – –

273mm DN 250 DN 250 DN 250 – 10 DN 250 DN 250 DN 250304.8mm – 304.8mm – – – – – – – –

300 12318.5mm JIS – – – 318.5mm – – – –

323.9mm DN 300 DN 300 DN 300 – 12 – – –

350 14355.6mm DN 350 DN 350 DN 350 DN 350 14 DN 350 – –

377mm China – – – – – 377mm – –

400 16406.4mm DN 400 DN 400 DN 400 DN 400 16 DN 400 – –

426mm China – – – – – 426mm – –

450 18457.2mm DN 450 DN 450 DN 450 DN 450 18 DN 450 – –

480mm China – – – – – 480mm – –

500 20508mm DN 500 DN 500 DN 500 DN 500 20 DN 500 – –

530mm China – – – – – 530mm – –

550 22558.8mm – – – DN 550 22 559mm – –

580mm China – – – – – 580mm – –

600 24610mm DN 600 DN 600 DN 600 DN 600 24 DN 600 – –

630mm China – – – – – 630mm – –

Desi

Gn D

ata



Metric/Imperial Conversion Chart

Convert Metric to Imperial Convert Imperial to Metric

MilliMetresX 0.03937

InchesX 25.4(mm) (in)

MetresX 3.281

FeetX 0.3048

(m) (ft)Kilogrammes

X 2.205Pounds

X 0.4536(kg) (lb)

GrammesX 0.03527

OuncesX 28.35

(g) (oz)Kilopascals

X 0.145Pressure

X 6.894(kPa) (psi)Bar

X 14.5Pressure

X .069

NewtonsX 0.2248

End LoadX 4.45

(N) (lb)Newton Metres

X 0.738Torque

X 1.356(N•m) (lbft)

CelsiusC + 17.78 × 1.8

Temp.F – 32 ÷ 1.8

(°C) (°F)Watts

X 1.341 × 10-3 HorsepowerX 745.7

(w) (hp)Litres per min.

X 0.2642Gal. per Min.

X 3.785(L/M) (gpm)

Cubic Metres per min.X 264.2

10-3 Gal. per Min.X 3.7865

(m3/m) (gpm)

This chart is provided as a guide for converting metric and imperial and measurements.

Flange Washer Adapter


Nominal mm

Inches

O.D.mm

Inches A B

50 60.3 100.0 57.22 2.375 3.94 2.75

65 73.0 119.1 69.92-1⁄2 2.875 4.69 2.75

65 76.1 124.2 73.2– 3.000 4.89 2.88

80 88.9 131.8 85.93 3.500 5.19 3.38

100 114.3 169.9 111.34 4.500 6.69 4.38

125 139.7 189.2 135.1– 5.500 7.45 5.32

125 141.3 192.0 136.75 5.563 7.56 5.38

150 165.1 215.1 160.5– 6.500 8.47 6.32

AB


Nominal mm

Inches

O.D.mm

Inches A B

150 168.3 217.4 163.66 6.625 8.56 6.44

200 219.1 274.6 214.48 8.625 10.81 8.44

250 273.0 335.0 266.710 10.750 13.19 10.50

300 323.9 404.9 317.512 12.750 15.94 12.50

Forinformationonadditionalsizes,contactGRINNELLMechanicalProducts.

MetalflangewasheradaptersarerequiredwhentheFigure71flangeadapterisusedagainstsurfacessuchas:

•Rubbersurfaces•AdaptingtoAWWAcastflanges•Rubberfacedwafervalves•SerratedflangesurfacesAvailableinstainlesssteelASTMA666Type304-2B.Contact

GRINNELLMechanicalProducts

Desi

Gn D

ata



Valve SizeANSI B16.1

(Class 125#) 1ISO 2084 (PN10) 2

ISO 2084 (PN16) 3

JIS B 2210 (10K)

AS 2129 (Table E)

Dimensions - mm Inches

Nominal mm

Inches

O.D.mm

Inches A B

Qty. N

A B Qty.

NA B

Qty. N

A B Qty.

NA B

Qty. N

50 60.3 120.6 19.04

125.0 18.04

125.0 18.04

120.0 19.04

114.0 18.04

2 2.375 4.75 0.75 4.92 0.71 4.92 0.71 4.72 0.75 4.49 0.71

65 73.0 139.7 19.04

145.0 18.04

145.0 18.04

140.0 19.04

127.0 18.04

2-1⁄2 2.875 5.50 0.75 5.71 0.71 5.71 0.71 5.51 0.75 5.00 0.71

80 88.9 152.4 19.04

160.0 18.08

160.0 18.08

150.0 19.08

146.0 18.04

3 3.500 6.00 0.75 6.30 0.71 6.30 0.71 5.91 0.75 5.75 0.71

100 114.3 190.5 19.18

180.0 18.08

180.0 18.08

175.0 19.08

178.0 18.08

4 4.500 7.50 0.75 7.09 0.71 7.09 0.71 6.89 0.75 7.00 0.71

125 141.3 215.9 22.48

210.0 18.08

210.0 18.08

210.0 23.08

210.0 18.08

5 5.563 8.50 0.88 8.27 0.71 8.27 0.71 8.27 0.91 8.27 0.71

150 168.3 241.3 22.48

240.0 22.08

240.0 22.08

240.0 23.08

235.0 22.08

6 6.625 9.50 0.88 9.45 0.87 9.45 0.87 9.45 0.91 9.25 0.87

200 219.1 298.5 22.28

295.0 22.08

295.0 22.012

290.0 23.012

292.0 22.08

8 8.625 11.75 0.88 11.61 0.87 11.61 0.87 11.42 0.91 11.50 0.87

250 273.0 362.0 25.412

350.0 22.012

355.0 26.012

355.0 22.012

356.0 22.012

10 10.750 14.25 1.00 13.78 0.87 13.98 1.02 13.98 0.87 14.02 0.87

300 323.9 431.8 25.412

400.0 22.012

410.0 26.012

400.0 25.016

406.0 26.012

12 12.750 17.00 1.00 15.75 0.87 16.14 1.02 15.75 0.98 15.98 1.02

350 355.6 476.5 28.412

460.0 22.016

470.0 26.016

445.0 25.016

470.0 26.012

14 14.000 18.76 1.12 18.11 0.87 18.50 1.02 17.52 0.98 18.50 1.02

400 406.4 539.8 28.416

515.0 26.016

525.0 30.016

510.0 27.016

521.0 26.012

16 16.000 21.25 1.12 20.28 1.02 20.67 1.18 20.08 1.06 20.51 1.02

450 457.2 577.9 31.816

565.0 26.020

585.0 30.020

565.0 27.020

584.0 26.016

18 18.000 22.75 1.25 22.24 1.02 23.03 1.18 22.24 1.06 22.99 1.02

500 508.0 635.0 31.820

620.0 26.020

650.0 33.020

620.0 27.020

641.0 26.016

20 20.000 25.00 1.25 24.41 1.02 25.59 1.30 24.41 1.06 25.24 1.02

600 609.6 749.3 35.120

725.0 30.020

770.0 36.020

730.0 33.024

756.0 33.016

24 24.000 29.50 1.38 28.54 1.18 30.31 1.42 28.74 1.30 29.76 1.301SamedrillingasforB16.5(Class150#)andB16.42(Class250#)2SamedrillingasforBS4504Section3.2(PN10)andDIN2532(PN10)3SamedrillingasforBS4504Section3.2(PN16)andDIN2532(PN16)Foradditionalinformation,contactGRINNELLMechanicalProducts.

Flange Drilling Specifications

“B” DimensionBolt Hole Diameter

“A” DimensionBolt Circle Diameter

Quantity “N”Number of Bolt Holes

MeCh

. ser

viCe

sGRiNNELL mECHANiCAL SERviCES


Common Challenges You Face• High Material Handling Costs • Piping Interferences and Clashes

• Material Backorders • Space Constraints

• High Installation Costs • Lack of Skilled Labour

• Excessive Material Leftovers • Compressed Delivery Schedules

Solutions We Provideour mechanical Design Department provides a strategic extension of your own design team.

our Project Planning jump-starts your design process, reducing indirect operations at the job site while identifying conflicts between your project documents.

our Virtual layout Process helps to identify interferences and space constraints before they become work-delay issues.

our building Information modelling expertise supports your BIM drafting and coordination. We deliver 3D Modelling in your preferred project format for clash detection.

our Design Flexibility incorporates the best joining technology available for your specific need by using grooved systems with combinations of welded, flanged, and pressed connections.

GRINNELL Mechanical Services, a department of GRINNELL Mechanical Products, works with engineers and contractors to create the most cost-effective and time-efficient piping solutions from design…to build.

Supporting Your Mechanical Business . . . From Design . . . To Build

MeCh

. ser

viCe

s

GRiNNELL mECHANiCAL SERviCES


Results We DeliverShop Drawings - This service creates easy-to-follow, tagged 3D Isometric Drawings with complete Bill of Material (BOM) tables and fully dimensioned piping plans of your mechanical equipment rooms. We provide pipe cut lengths to minimise field cutting and fitting and to simplify your installations.

Pump Assemblies and Equipment Connections - Our 3D Modelling with tagged BOM tables provides clear, accurate representations of grooved piping hook-ups. Based on equipment submittals and bid drawings (flow diagrams, HVAC details, and plan views), we create detailed assemblies that you can use for submittals, reviews, and assembly instructions.

Cost Comparisons - Using industry-standard, man-hour data estimations and our BOMs, we compare the cost savings of grooved piping solutions over traditional welded/flanged joining methods. By utilising the benefits of grooved piping, our technical experts recommend ways to save you money.

Crate and Tag Handling - We provide an effective material handling process to help increase your labour productivity by 25% or more. We deliver complete, tagged pump or equipment hook-up BOMs directly to equipment rooms for easy access, eliminating your need to reference multiple shipments and back orders and reducing your material waste and overages.

Thermal Movement Analyses - We assist specifiers and installers on the proper use of grooved couplings for thermal expansion compensation in piping systems. Our in-depth assessments of your systems offer cost-effective design solutions, reduce rework, and help you meet project performance requirements.

CAD Blocks and Families - We offer traditional AutoCAD* blocks, AutoCAD MEP parametric block catalogues, and Revit* families with manageable file sizes, accurate dimensions, and part numbers to save you time and money.

Training - In a state-of-the-art educational facility, our training includes informative classroom lectures on leading industry technologies, hands-on demonstrations of grooved products, and on-site performance testing of product assemblies.

Technical Expertise - We provide direct access to the individuals who design, test, and build our products every day. Contact us; we’ll be glad to assist you.

*AutoCADisaregisteredtrademarkofAutodesk,Inc.

*RevitisaregisteredtrademarkofAutodesk,Inc.

MeCh

. ser

viCe

sGRiNNELL mECHANiCAL SERviCES


Technical ExpertiseTraining

Design Work

inDi

Ces

iNDiCES


71 - ANSI 125#/150# ............................. 28 - 2971 - PN10/PN16 ..................................... 30 - 3171 - AS2129 Table E ...................................... 32201LR .......................................................... 37210 ............................................................. 36210LR .......................................................... 36211 ............................................................. 39212 ............................................................. 38219 ............................................................. 44221 ....................................................... 46 - 48227 ............................................................. 69250 ....................................................... 51 - 54251 ....................................................... 55 - 57260 ............................................................. 70301LR .......................................................... 37301-3D ........................................................ 41301-5D ........................................................ 42301-6D ........................................................ 43303-3D ........................................................ 41303-5D ........................................................ 42303-6D ........................................................ 43306-3D ........................................................ 41306-5D ........................................................ 42306-6D ........................................................ 43310LR .......................................................... 36310-3D ........................................................ 41310-5D ........................................................ 42310-6D ........................................................ 43311 ............................................................. 39312 ............................................................. 38312-3D ........................................................ 41312-5D ........................................................ 42312-6D ........................................................ 43313-3D ........................................................ 41313-5D ........................................................ 42313-6D ........................................................ 43314 ............................................................. 63315 ............................................................. 40316 ............................................................. 40319 ............................................................. 44320 ............................................................. 45321 ....................................................... 46 - 48323 ....................................................... 49 - 50324 ............................................................. 62325 ....................................................... 64 - 65327 ............................................................. 69330 ....................................................... 66 - 67331 ............................................................. 68341 ............................................................. 71342 ............................................................. 71350 ....................................................... 51 - 54351 ....................................................... 55 - 57360 ............................................................. 70372 ............................................................. 58380 ............................................................. 59391 ............................................................. 60392 ............................................................. 60393 ............................................................. 60395 ............................................................. 59397 ............................................................. 61

398 ............................................................. 61399 ............................................................. 61401 ........................................................... 115405 ........................................................... 114407GT ......................................................... 72407T ........................................................... 72410 ........................................................... 115419 ........................................................... 116421 ........................................................... 117441 ........................................................... 120450 ........................................................... 118451 ........................................................... 119460 ........................................................... 116472 ........................................................... 112590 ....................................................... 92 - 93702 ....................................................... 26 - 27705 ............................................................. 22707 ....................................................... 20 - 21 716 ............................................................. 24730 - Threaded ....................................... 75 - 77730 - Grooved ........................................ 78 - 80770 ......................................................23, 113772 ....................................................... 18 - 19780 ............................................................. 25901 ........................................................... 125901LR ........................................................ 126909 ........................................................... 124910 ........................................................... 125910LR ........................................................ 126914 ........................................................... 129919 ........................................................... 127921 ........................................................... 127924 ........................................................... 129927 ........................................................... 128941 ........................................................... 132942 ........................................................... 132960 ........................................................... 128991 ........................................................... 131992 ........................................................... 131993 ........................................................... 131999 ........................................................... 1307550 ......................................................... 1079094 ......................................................... 1359095 ......................................................... 1369097 ......................................................... 137B302 ..................................................... 84 - 87B308 ..................................................... 88 - 89B8101 ......................................................... 83BC835 ................................................... 90 - 91CB800 ......................................................... 98CB800 ......................................................... 98CB800 ......................................................... 99CB800 ......................................................... 99CB800 ....................................................... 100GRNTAPE ................................................... 153MC2 .......................................................... 100S810 ................................................. 104 - 105S835 ......................................................... 103S855 ......................................................... 106TD830 ......................................................... 94

Figure Number IndicesFigure Number ........................................... Page Figure Number ........................................... Page

inDi

Ces

iNDiCES


Product Name IndicesProduct Name ............................................. Page Product Name ............................................. Page

Accessoires . . . . . . . . . . . . . . . . . . . . . . . . . 101 – 108Automated Roll Groover . . . . . . . . . . . . . . . . . . . . . . 151Circuit Balancing Valves. . . . . . . . . . . . . . . . . . 95 – 100Field Portable Roll Groover . . . . . . . . . . . . . . . . . . . . 152Figure 201 45° Cast Elbows . . . . . . . . . . . . . . . . . . . 37Figures 201LR & 301LR 45° Long Radius Elbows . . . . . 37Figure 210 90° Cast Elbows . . . . . . . . . . . . . . . . . . . 36Figures 210LR & 310LR 90° Long Radius Elbows . . . . . 36Figures 211 & 311 11-1⁄4° Elbows . . . . . . . . . . . . . . . 39Figures 212 & 312 22-1⁄2° Elbows . . . . . . . . . . . . . . . 38Figures 219 & 319 Tees . . . . . . . . . . . . . . . . . . . . . . 44Figures 221 & 321 Reducing Tees . . . . . . . . . . . . 46 - 48Figures 227 Cast & 327 Fabricated Crosses . . . . . . . . 69Figures 250 & 350 Concentric Reducers . . . . . . . . 51 - 54Figures 251 & 351 Eccentric Reducers . . . . . . . . . 55 - 57Figures 260 & 360 End Caps . . . . . . . . . . . . . . . . . . . 70Figure 314 45° Laterals . . . . . . . . . . . . . . . . . . . . . . . 63Figure 315 Groove x Male Thread 90° Elbows . . . . . . 40Figure 316 Reducing Base Support Elbow . . . . . . . . . . 40Figure 320 Groove x Groove x Male Thread Tees . . . . . 45Figure 323 Groove x Male Thread Reducing Tees . . 49 - 50Figure 324 90° True Wyes . . . . . . . . . . . . . . . . . . . . . 62Figure 325 45° Reducing Laterals . . . . . . . . . . . . . 64 - 65Figure 330 Tee Wyes . . . . . . . . . . . . . . . . . . . . . 66 - 67Figure 331 Reducing Tee Wyes . . . . . . . . . . . . . . . . . 68Figure 341 Flange Adapters (ANSI Class 150#) . . . . . . 71Figure 342 Flange Adapters (ANSI Class 300#) . . . . . . 71Figure 372 Reducers, Small End Threaded (Male) . . . . . 58Figure 380 Female Thread Adapters . . . . . . . . . . . . . . 59Figures 391, 392 & 393 Adapter Nipples . . . . . . . . . . 60Figure 395 Hose Adapter Nipples, Groove x Hose . . . . 59Figures 397, 398 & 399 Swaged Nipples . . . . . . . . . . 61Figure 401 45° Stainless Steel Elbows . . . . . . . . . . . . 115Figure 405 Stainless Steel Flexible Couplings . . . . . . . 114Figures 407GT & 407T Dielectric Waterways . . . . . . . 72Figure 410 90° Stainless Steel Elbows . . . . . . . . . . . . 115Figure 419 Tees . . . . . . . . . . . . . . . . . . . . . . . . . . . 116Figure 421 Reducing Tees . . . . . . . . . . . . . . . . . . . . 117Figure 441 Flange Adapters (ANSI Class 150#) . . . . . 120Figure 450 Concentric Reducers . . . . . . . . . . . . . . . . 118Figure 451 Eccentric Reducers . . . . . . . . . . . . . . . . . 119Figure 460 End Caps . . . . . . . . . . . . . . . . . . . . . . . 116Figure 472 Stainless Steel Rigid Couplings . . . . . . . . . 112Figure 702 Mechanical Outlet Couplings . . . . . . . . 26 - 27Figure 705 Flexible Couplings . . . . . . . . . . . . . . . . . . 22Figure 707 Heavy Duty Flexible Couplings . . . . . . . 20 - 21Figure 71 Flange Adapters (ANSI Class 125/150) . 28 - 29Figure 71 Flange Adapters (AS2129 Table E) . . . . . . . . 32Figure 71 Flange Adapters (PN10/PN16) . . . . . . . 30 - 31Figure 716 Flexible Reducing Couplings . . . . . . . . . . . 24Figure 730 Mechanical Tees & Crosses – Grooved . 78 - 80Figure 730 Mechanical Tees & Crosses – Threaded 75 - 77Figure 770 High Pressure Rigid Couplings . . . . . . . . . . 23Figure 770 High Pressure Rigid Couplings . . . . . . . . . 113Figure 772 Rigid Couplings . . . . . . . . . . . . . . . . . 18 - 19

Figure 780 Grooved Snap Couplings . . . . . . . . . . . . . 25Figure 901 45° Plain End Elbows . . . . . . . . . . . . . . . 125Figure 901LR 45° Plain End Long Radius Elbows. . . . . 126Figure 909 Plain End Couplings . . . . . . . . . . . . . . . . 124Figure 910 90° Plain End Elbows . . . . . . . . . . . . . . . 125Figure 910LR 90° Plain End Long Radius Elbows. . . . . 126Figure 914 Plain End Laterals . . . . . . . . . . . . . . . . . . 129Figure 919 Plain End Tees . . . . . . . . . . . . . . . . . . . . 127Figure 921 Plain End Reducing Tees . . . . . . . . . . . . . 127Figure 924 Plain End True Wyes . . . . . . . . . . . . . . . . 129Figure 927 Plain End Crosses . . . . . . . . . . . . . . . . . . 128Figure 941 Plain End Flange Adapters (ANSI 150#) . . 132Figure 942 Plain End Flange Adapters (ANSI 300#) . . 132Figure 960 Plain End Caps . . . . . . . . . . . . . . . . . . . 128Figures 991, 992, 993 Plain End Adapter Nipples . . . 131Figure 999 Plain End Swaged Nipples . . . . . . . . . . . 130Figure 7550 Expansion Joint . . . . . . . . . . . . . . . . . . 107Figure 9094 Flange Couplings . . . . . . . . . . . . . . . . . 135Figure 9095 HDPE Couplings . . . . . . . . . . . . . . . . . . 136Figure 9097 HDPE Transition Couplings . . . . . . . . . . 137Figure S810 Suction Diffusers . . . . . . . . . . . . . . 104 - 105Figure S853 “Y” Strainers . . . . . . . . . . . . . . . . . . . . 103Figure S855 Tee Strainers . . . . . . . . . . . . . . . . . . . . 106Flange Washer Adapter . . . . . . . . . . . . . . . . . . . . . . 165Gasket Styles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 141Gaskets . . . . . . . . . . . . . . . . . . . . . . . . . . . . 139 – 146Grooved Couplings . . . . . . . . . . . . . . . . . . . . . . 15 – 32Grooved Fittings . . . . . . . . . . . . . . . . . . . . . . . . 33 – 72Grooving Equipment . . . . . . . . . . . . . . . . . . . . . . . . 151HDPE Systems . . . . . . . . . . . . . . . . . . . . . . . . 133 – 138Hole Cutting Tool . . . . . . . . . . . . . . . . . . . . . . . . . . 153Long Radius 3D Elbows . . . . . . . . . . . . . . . . . . . . . . . 41Long Radius 5D Elbows . . . . . . . . . . . . . . . . . . . . . . . 42Long Radius 6D Elbows . . . . . . . . . . . . . . . . . . . . . . . 43Mechanical Tees . . . . . . . . . . . . . . . . . . . . . . . . 73 – 80Model 308 Butterfly Valves. . . . . . . . . . . . . . . . . . 88 - 89Model 590 Grooved End Check Valves . . . . . . . . . 92 - 93Model B302 Grooved End Butterfly Valves . . . . . . . 84 - 87Model B8101 Low Profile Butterfly Valves . . . . . . . . . . 83Model BV835 Ball Valves . . . . . . . . . . . . . . . . . . . 90 - 91Model CB800 CBV, Flanged Ends, ANSI Class 125# . . 99Model CB800 CBV, Flanged Ends, PN16/PN10 . . . . . 99Model CB800 CBV, Grooved Ends . . . . . . . . . . . . . . . 98Model CB800 CBV, Insulation Kits . . . . . . . . . . . . . . 100Model CB800 CBV, MC2 Measuring Computer . . . . . 100Model CB800 Circuit Balancing Valves, Threaded Ends 98Model GRNTAPE Pipe Tape . . . . . . . . . . . . . . . . . . . 153Model TD830 Triple Duty Valves . . . . . . . . . . . . . . . . . 94Pipe Support Stand . . . . . . . . . . . . . . . . . . . . . . . . . 153Plain End Systems . . . . . . . . . . . . . . . . . . . . . 121 – 132Portable Cut Groovers . . . . . . . . . . . . . . . . . . . . . . . 151Portable Roll Groover . . . . . . . . . . . . . . . . . . . . . . . 152Preparation Equipment . . . . . . . . . . . . . . . . . . 147 – 154Stainless Steel Systems . . . . . . . . . . . . . . . . . . 109 – 120Valves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81 – 94

inDi

Ces

iNDiCES


Keyword IndicesKeywords ............................................................................................................................... Page

“Y” Strainers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10311-1⁄4° Elbows . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3922-1⁄2° Elbows . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 383D Elbows, Long Radius . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4145° Cast Elbows . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3745° Laterals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6345° Long Radius Elbows . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3745° Plain End Elbows . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12545° Plain End Long Radius Elbows . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12645° Reducing Laterals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64 - 6545° Stainless Steel Elbows . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1155D Elbows, Long Radius . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 426D Elbows, Long Radius . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4390° Cast Elbows . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3690° Elbows, Groove x Male Thread . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4090° Long Radius Elbows . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3690° Plain End Elbows . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12590° Plain End Long Radius Elbows . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12690° Stainless Steel Elbows . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11590° True Wyes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62Accessoires . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101 – 108Adapter Nipples . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60Adapter Nipples, Hose, Groove x Hose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59Adapter Nipples, Plain End . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 131Adapters, Flange . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71Adapters, Flange, Stainless Steel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120Adapters, Groove x Female Thread . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59Agency Listings and Approvals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11Associations & Approval Bodies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11Automated Roll Groover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 151Balancing Valves, Circuit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95 – 100Ball Valves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90 - 91Base Support Elbow, Reducing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40Butterfly Valves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88 - 89Butterfly Valves, Grooved End . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84 - 87Butterfly Valves, Low Profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83Caps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70Caps, Plain End . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 128Caps, Stainless Steel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116Check Valves, Grooved End . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92 - 93Circuit Balancing Valves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95 – 100Circuit Balancing Valves Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97Circuit Balancing Valves, Flanged Ends, ANSI Class 125#. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99Circuit Balancing Valves, Flanged Ends, PN16/PN10 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99Circuit Balancing Valves, Grooved Ends . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98Circuit Balancing Valves, Insulation Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100Circuit Balancing Valves, MC2 Measuring Computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100Circuit Balancing Valves, Threaded Ends . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98Concentric Reducers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51 - 54Concentric Reducers, Stainless Steel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 118

inDi

Ces

iNDiCES



Conversion Chart, Metric/Imperial . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 165Coupling Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17Couplings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15 – 32Couplings, HDPE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 135 - 137Couplings, Plain End . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 124Couplings, Stainless Steel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112 - 114Crosses, Cast & Fabricated . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69Crosses, Grooved, Mechanical . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78 - 80Crosses, Plain End . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 128Crosses, Threaded, Mechanical . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75 - 77Cut Groove Standard Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150Dielectric Waterways . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72Diffusers, Suction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104 - 105Eccentric Reducers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55 - 57Eccentric Reducers, Stainless Steel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 119Elbows, 11-1⁄4° . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39Elbows, 22-1⁄2° . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38Elbows, 45° Plain End . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125Elbows, 45° Plain End Long Radius . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 126Elbows, 45° Stainless Steel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115Elbows, 90° Plain End . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125Elbows, 90° Plain End Long Radius . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 126Elbows, 90° Stainless Steel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115Elbows, 90°, Groove x Male Thread . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40End Caps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70End Caps, Stainless Steel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116Expansion Joint . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107Fabricated Crosses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69Features and Benefits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10Female Thread Adapters Groove x Female Thread . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59Field Portable Roll Groover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 152Fittings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33 – 72Fittings Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35Flange Adapters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71Flange Adapters (ANSI Class 125/150) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 - 29Flange Adapters (AS2129 Table E) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32Flange Adapters (PN10/PN16) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 - 31Flange Adapters, Plain End . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 132Flange Adapters, Stainless Steel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120Flange Couplings, HPDE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 135Flange Drilling Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166Flange Washer Adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 165Flexible Couplings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22Flexible Couplings, Heavy Duty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 - 21 Flexible Couplings, Stainless Steel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114Flexible Joints . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 160Flexible Reducing Couplings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24Gasket Air, Water & Chemical Recommendations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 143 - 145Gasket Grade & Recommendations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 142Gasket Lubricants . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 146

inDi

Ces

iNDiCES



Gasket Styles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 141Gaskets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 139 – 146General Code Groups, Associations, Laboratories & Approval Bodies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11Global Pipe Size Designations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 164Government Agencies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11GRINNELL Website . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14Groove x Female Thread, Adapters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59Groove x Groove x Male Thread Reducing Tees . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49 - 50Groove x Hose, Adapter Nipples . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59Groove x Male Thread 90° Elbows. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40Grooved Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 156Grooved Couplings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15 – 32Grooved End Butterfly Valves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84 - 87Grooved End Check Valves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92 - 93Grooved Fittings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33 – 72Grooved Snap Couplings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25Grooving Equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 151HDPE Couplings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 136HDPE Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 133 – 138HDPE Systems Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 134HDPE Transition Couplings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 137Heavy Duty Flexible Couplings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 - 21 High Pressure Rigid Couplings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23, 113Hole Cutting Tool . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 153Hose Adapter Nipples, Groove x Hose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59HPDE Flange Couplings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 135ISO 9001:2000 Certified . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13Joints, Expansion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107Joints, Flexible or Rigid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 160Laboratories & Approval Bodies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11Laterals, 45° . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63Laterals, 45° Reducing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64 - 65Laterals, Plain End . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 129Long Radius 3D Elbows . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41Long Radius 5D Elbows . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42Long Radius 6D Elbows . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43Long Radius Elbows, 45° . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37Long Radius Elbows, 45° Plain End . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 126Long Radius Elbows, 90° . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36Long Radius Elbows, 90°, Plain End . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Low Profile Butterfly Valves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83Mechanical Outlet Couplings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 - 27Mechanical Services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 167 – 170Mechanical Tees & Crosses – Grooved . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78 - 80Mechanical Tees & Crosses – Threaded . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75 - 77Mechanical Tees Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74Misalignment & Deflection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 159Nipples, Adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60Nipples, Hose Adapter, Groove x Hose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59Nipples, Plain End Adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 131

inDi

Ces

iNDiCES



Nipples, Plain End Swaged . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 130Nipples, Swaged . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61Outlet Couplings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 - 27Pipe Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 160 - 162Pipe Support Stand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 153Pipe Tape . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 153Plain End Adapter Nipples . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 131Plain End Caps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 128Plain End Couplings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 124Plain End Couplings Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123Plain End Crosses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 128Plain End Elbows, 45° . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125Plain End Elbows, 90° . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125Plain End Fittings Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123Plain End Flange Adapters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 132Plain End Laterals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 129Plain End Long Radius Elbows, 45° . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 126Plain End Long Radius Elbows, 90° . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 126Plain End Reducing Tees . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127Plain End Swaged Nipples . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 130Plain End Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121 – 132Plain End Tees . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127Plain End True Wyes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 129Portable Cut Groovers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 151Portable Roll Groover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 152Preparation Equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 147 – 154Pressure & Design Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 155 – 166Reducers, Concentric . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51 - 54Reducers, Concentric, Stainless Steel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 118Reducers, Eccentric . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55 - 57Reducers, Eccentric, Stainless Steel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 119Reducers, Small End Threaded (Male) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58Reducing Base Support Elbow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40Reducing Couplings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24Reducing Laterals, 45° . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64 - 65Reducing Tee Wyes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68Reducing Tees . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46 - 48Reducing Tees, Groove x Groove x Male Thread . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49 - 50Reducing Tees, Plain End . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127Reducing Tees, Stainless Steel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 117Rigid Couplings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 - 19Rigid Couplings, High Pressure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23, 113Rigid Couplings, Stainless Steel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112Rigid Joints . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 160Roll Groove Standard Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 149Snap Couplings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25Stainless Steel Concentric Reducers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 118Stainless Steel Couplings Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111Stainless Steel Eccentric Reducers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 119Stainless Steel Elbows, 45° . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115

inDi

Ces

iNDiCES


Stainless Steel Elbows, 90° . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115Stainless Steel End Caps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116Stainless Steel Fittings Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111Stainless Steel Flange Adapters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120Stainless Steel Flexible Couplings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114Stainless Steel Reducing Tees . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 117Stainless Steel Rigid Couplings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112Stainless Steel Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109 – 120Stainless Steel Tees . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116Strainers, “Y” . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103Strainers, Tee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106Suction Diffusers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104 - 105Swaged Nipples . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61Swaged Nipples, Plain End . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 130Tee Strainers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106Tee Wyes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66 - 67Tee Wyes, Reducing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68Tees . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44Tees, Groove x Groove x Male Thread . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45Tees, Grooved, Mechanical . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78 - 80Tees, Mechanical . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .73 – 80Tees, Plain End . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127Tees, Plain End Reducing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127Tees, Reducing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46 - 48Tees, Reducing, Groove x Groove x Male Thread . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49 - 50Tees, Reducing, Stainless Steel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 117Tees, Stainless Steel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116Tees, Threaded, Mechanical . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75 - 77Thermal Movement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 157 - 158Transition Couplings, HDPE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 137Triple Duty Valves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94True Wyes, 90° . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62True Wyes, Plain End . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 129Valves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .81 – 94Valves, Ball . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90 - 91Valves, Butterfly, Grooved End . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84 - 89Valves, Check, Grooved End . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92 - 93Valves, Circuit Balancing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95 – 100Valves, Low Profile Butterfly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83Valves, Triple Duty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94Vertical Piping . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 163Waterways, Dielectric . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72Wyes, 90° True . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62Wyes, Plain End True . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 129Wyes, Reducing Tee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68Wyes, Tee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66 - 67


10 yEAR LimiTED WARRANTy


Limited WarrantyProducts manufactured by Tyco International (Tyco) under the GRINNELL brand are warranted solely to the original Buyer for ten (10) years against defects in material and workmanship when paid for and properly installed and maintained under normal use and service, except for the G-MINE line of products, which are warranted solely to the original Buyer for six (6) months against defects in material and workmanship when paid for and properly installed and maintained under normal use and service. This warranty will expire ten (10) years from date of shipment by Tyco. No warranty is given for products or components manufactured by companies not affiliated by ownership with Tyco or for products and components which have been subject to misuse, improper installation or maintenance, corrosion, or other external sources of damage. Materials found by Tyco to be defective shall be either repaired or replaced, at Tyco’s sole option. Tyco neither assumes, nor authorizes any person to assume for it, any other obligation in connection with the sale of products or parts of products. Tyco shall not be responsible for system design errors or inaccurate or incomplete information supplied by Buyer or Buyer’s representatives.

In no event shall Tyco be liable, in contract, tort, strict liability or under any other legal theory, for incidental, indirect, special or consequential damages, including but not limited to labor charges, regardless of whether Tyco was informed about the possibility of such damages, and in no event shall Tyco’s liability exceed an amount equal to the sales price.

The foregoing warranty is made in lieu of any and all other warranties, express or implied, including warranties of merchantability and fitness for a particular purpose.

This limited warranty sets forth the exclusive remedy for claims based on failure of or defect in products, materials or components, whether the claim is made in contract, tort, strict liability or any other legal theory.

This warranty will apply to the full extent permitted by law. The invalidity, in whole or part, of any portion of this warranty will not affect the remainder.

Copyright © 2011 Tyco International Ltd. / Printed in USAGM-AP-2011-001-00

ASIA PACIFIC / January 2011

India804,Windsor, Off CST Road, Kalina, Santacruz (East), Mumbai – 400098, IndiaPhone:+91-22-61310600 Fax : +91-22-67417405 E-mail: [email protected]

ShanghaiBuilding No.1, Lane 955, Jinhai Road Pudong, Shanghai 201206, P.R.C.T: +86 21 61633373 F: +86 21 61633371 E-mail: [email protected]

Hong KongPhase 1, 10/F, Goodman Shatin Logistics Centre No.6 Wong Chuk Yeung Street Fotan, Shatin Hong KongT: 852-2595-0686 Fax:852-2505-5826 E-mail: [email protected]

Singapore2 Serangoon North Avenue 5, #07-01 Fu Yu Building, Singapore 554911 Tel : +65 6577 4360 Fax: +65 6481 8791 E-mail: [email protected]

Australia567 Somerville Road SUNSHINE VIC 3020 AUSTRALIATel: 1300 725 688 (within Australia) Tel: +61 3 9933 6200 Fax +61 3 9933 6204 E-mail: [email protected]

Making Connections…Building Solutions.

grooved fittings

Documents