By: Greg Beck270 W. Thacker StHoffman Estates, IL 60169T: 847-668-4034All rights reserved

Examples of past design solutions

Employed: 1996-2003

Part 1: MedicalMurray Project Examples

MedicalMurray BackgroundWhen I was hired in 2003, I was an in-house engineering consultant. I worked on three types of projects: ● Projects for MedicalMurray internally● Projects performed in-house for other clients● Projects that I was contracted for.

This was for customers across the telecommunications, medical, military, automotive, and consumer goods.

The following are examples of my efforts.

Example "Nanomolding" Injection Molding Machine.

Projects for MedicalMurray Internal

Phil and Andy Leopold patented a way to injection mold really small items, about the size of a sesame seed. During the development process, they discovered a fault in the design, which made the core difficult to clean. They used me to develop a solution

In-House Project Background

Solution and resolution

Developed a design where instead of the core being 1 piece, the elements could be disassembled into different pieces. The different pieces could be placed into an autoclave and the plastic can be burned out. Making the core available for the next design. The design was completed in about a month. The parts were completed and used sucessfully.

Example: Transmission shifter faceplate for Arens Controls.

Projects for External Customers of MedicalMurray Brought In-House

Arens Controls Shifter Bezel Background

In 1999, MedicalMurray received a contract to help develop a design for two types of bezels for their t-shifter and pushbutton shifters (the pushbutton shifter bezel is show aside). All that was given was surfaces given by their customer.

Arens Controls Shifter Bezel Resolution

Using Solidworks, I reverse-engineered the bezel. I designed it to accommodate the mounts that the current bezels incorporated. The design was manufactured using polycarbonate. It went into production in 2000.

Example: Combine Propulsion Handle for Arens Controls, 2000

Projects for External Customers of MedicalMurray While on Contract

Combine Propulsion Handle Prototype

Arens Controls contracted me out, among other things to work on the propulsion handle. The design proposed is a prototype designed in Solidworks. It incorporated their dome technology. It was designed to be overmolded (although this prototype looks like one piece, the actual CAD had the overmolded surfaces worked out)

Combine Propulsion Handle Prototype Resolution

Additionally (not shown) is a rocker switch position, and push-button switch on the top. It also included the light guides, PCBs, etc. Twenty prototypes were created and given to the customer for review. Contract ended after completion

Employed: 2004-2005

Part 2: Diehl Controls Project Examples

Main project at Diehl: CLICs Project for Maytag

Maytag enlisted Diehl Controls to develop a digital control to merge up to 32 electro-mechanical control combinations across their Amana and Maytag washers and dryers. These were assembled in there Searcy, Arkansas and Herrin, Illinois plants.

CLICs actions● Managed relationship with Maytag. ● Designed control PCB and mount (not

shown) ● Modified sheetmetal front to allow Molex

LED membrane● Specified and worked with switch vendor● Worked with Maytag as it reached

production in 2005.

Example PCB Housing Designed 2005

Background: In this design, the electricals at Maytag and Diehl had designed the PCB, without general input from mechanical engineering initially. Due to several size constraints, only a "toast" housing was conceivable. The design required little to no fasteners to save cost.

The following was designed in Pro/E in approximately two months. The material chosen was polypropylene.

What was designed

living hinge snap lugs

snap lugs

Employed: 2005-2011

Projects for Motorola, Inc

Motorola Projects Background

Worked on three control heads for the MotoTRBO radios and a remote speaker microphone. These were done from a concept markup from marketing and followed all the way to production. Production would be in Malaysia for the radios and in Mexico for the RSM. Components were manufactured all over the world.

MotoTRBO XPR 4350 Radio

Designed the following: ● Designed backlighting

using direct lighting technology.

● Lens● Keypad● Housing shared the

cavity side with sister radio to save tooling cost.

HMN4104 RSM

Designed the following: ● Display mount (uses a

sheetmetal clip to hold display)

● Front to optimize looks and audio performance

● Lens area● Speaker mounting to

optimize audio performance

MotoTRBO XPR 5000 Series Radio

Designed the following: ● Lenses for both● Backlighting was

accomplished using light guide foil technology

● The displays● Keypad designs.

Employed: 2013-2014

Projects for Plasticade, Inc

Plasticade ProjectsWorked on various blow-molded programs. Items to be released:The Metropolitan SignWatchtower Stacker ConeRevised A-FrameThe Billboard 36x48 Sign (unpictured)

Employed: 2014-2015

Projects for GN Resound, Inc

GN Resound Sportlock

Worked on the design, qualification, and testing of sportlocks, which hold the receiver into the ear on some patients

Sportlock

Receiver

GN Resound RIE hearing aids

Worked on the design update to internal components of ReSound and Beltone hearing aids, qualification, and testing of sister RIE hearing aids