The GreenbergR Retractor and Handrest is a

versatile, three-level system offering space planning,

whereby each level has an assigned surgical task. This

allows performance with more control and less tremor

and fatigue.

GreenbergR Retractor and Handrest

50-1513 GreenbergR Pattie Tray attaches to Long or Short Arm (50-1509 or 50-1511).

50-1524 GreenbergR Large Instrument Holder is a flexbar arm used to support heavy instruments. The cantilever clamp holds instruments with shafts up to 1” in diameter.

50-1507 GreenbergR Primary Bar attaches to skull clamp. Greenberg Retractor Kit (50-1500) is supplied with two primary bars.

50-1512 GreenbergR Handrest attaches to Short Coupler (50-1522) or a Secondary Bar (50-1516).

50-1516 GreenbergR Floating Secondary Bar attaches to primary bar. Length 12Ø (305mm). GreenbergR Retractor Kit (50-1500) is supplied with four secondary bars.

50-1529 GreenbergR Micro Instrument Holder is a flexbar arm used to hold micro instruments used repeatedly within retracted fields. Holds instruments with shafts up to 1/8” in diameter.

50-1525 GreenbergR XL Instrument Holder holds instruments up to 2” in diameter.

50-1509 GreenbergR Long Retractor Arm attaches to Floating Secondary Bars. Greenberg Retractor Kit (50-1500) is supplied with four Long Retractor Arms.

50-1523 GreenbergR Small Instrument Holder is a flexbar arm used when greater holding force than that offered by the Micro Instrument Holder (50-1529) is needed. Holds instruments with shafts up to 5/16” in diameter and flat instruments.

50-1508 GreenbergR Secondary Bar. Kit is supplied with four secondary bars attached to primary bar

*Above set shown with 50-1516 Greenberg Floating Secondary Bar and additional 50-1512 Handrest.

50-1522 GreenbergR Short Coupler should be used to mount GreenbergR Handrest (50-1512) to the Floating Secondary at Level I.

50-1530

50-153450-1533

50-153150-1532

1/4” x 3/4” (6mm x 19mm)

1/16” x 1/4” (1.6mm x 6mm)3/32” x 3/8” (2mm x 10mm)1/8” x 1/2” (3mm x 13mm)5/32” x 5/8” (4mm x 16mm)

GreenbergR Tapered Retractor Blades. Both ends can be used for retraction. Attaches to GreenbergR Long Arm (50-1509) or Greenberg Short Arm (50-1511). Blade Length-9” (229mm).

50-1514 GreenbergR Universal Retractor Case with four compartments to hold various components.

Compartment #1 Compartment #2 Length 10 3/8” (264mm) 17” (432mm) Width 7 3/4” (197mm) 2 1/8” (54mm) Compartment #3 Compartment #4 Length 6 3/4” (171mm) 6 3/4” (171mm) Width 4 5/8” (117mm) 3 1/8” (79mm)

Complete Case Dimensions Length 17” (432mm) Width 10” (254mm) Depth 2 3/8” (60mm)

Gentle “C Shaped” arc of the retractor arms is all that is needed to keep retractor blades in place.

The GreenbergR = Ergonomic EfficiencySurgeons can gently place their palm on the handrest, offering proprioceptive touch infom-ration. The muscles of the forearm, arm, shoul-der and neck can all relax. The only tension is be-tween the thumb and the index fingers holding the instruments.

Precision movements are further executed by slight flexion and extension of these fingers with a little rotation of the palm.

The slotted handrests were designed to accom-modate commonly used instrumentation en-abling easy exchanges.

The GreenbergR Retractor plays a critical role in brain surgery. Your Symmetry Surgical

representative is certified to perform a check-up on this system and to realign

components to properly readjust the system, ensuring your GreenbergR Retractor provides

you and your patients with the highest possible performance.

Contact Symmetry Surgical to schedule your system checkup today!

3034 Owen Drive | Antioch, TN 37013 | 800.251.3000 | customerservice@symmetrysurgical.com | symmetrysurgical.com

©2014 Symmetry Surgical, Inc. All rights reserved. SM 0038

244111

QTY

QTYin kit

CODE DESCRIPTION

50-1500 GreenbergR Universal Retractor and Handrest Kit

All components are available individually or as a complete kit

Visit symmetrysurgical.com or contact your local Sales Representative for more information.

1

CODE DESCRIPTION Length Width Depth

50-1507 GreenbergR Primary Bar 6” (152mm)

50-1508 GreenbergR Secondary Bar 12” (305mm) 50-1509 GreenbergR Long Retractor Arm 9 1/2” (241mm) 50-1512 GreenbergR Handrest 10” (254mm) 50-1513 GreenbergR Pattie Tray 6 3/4” (76mm) 3” (76mm) 50-1514 GreenbergR Universal Retractor Case with 4 Compartments Case 17” (432mm) 10” (254m 2 3/8” (60mm) Compartment #1 10 3/8” (264mm) 7 3/4” (197mm) Compartment #2 17” (432mm) 2 1/8” (54mm) Compartment #3 6 3/4” (171mm) 4 5/8” (117mm) Compartment #4 6 3/4” (171mm) 3 1/8” ( 79mm)

GreenbergR Tapered Retractor BladesCODE Length Width

50-1530 9” (229mm) 1/4” x 3/4” (6mm x 19mm)50-1531 9” (229mm) 5/32” x 5/8” (4mm x 16mm)50-1532 9” (229mm) 1/8” x 1/2” (3mm x 13mm)50-1533 9” (229mm) 3/32” x 3/8” (2mm x 10mm)50-1534 9” (229mm) 1/16” x 1/4” (1.6mm x 6mm)

GreenbergR Additional Components (not included with kit 50-1500)CODE Description Holds Length

50-1516 GreenbergR Secondary Bar 12Ø (305mm)50-1523 GreenbergR Small Instrument Holder Shafts up to 5/16”50-1524 GreenbergR Large Instrument Holder Shafts up to 1”50-1525 GreenbergR XL Instrument Holder Shafts up to 2”50-1529 Greenberg RMicro Instrument Holder Shafts up to 1/8”