gravstat™ a oex technology registered in the u. s. patent and trademark office and offered through...

54
GravStat™ A OEX Technology Registered in the U. S. Patent and Trademark Office and offered through Lockhart Geophysical GravStat™ A method of determining seismic statics from gravity data. An OEX Technology Registered in the U.S. Patent and Trademark Office offered through Lockhart Geophysical.

Upload: carmel-andrews

Post on 14-Dec-2015

213 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: GravStat™ A OEX Technology Registered in the U. S. Patent and Trademark Office and offered through Lockhart Geophysical GravStat™ A method of determining

GravStat™ A OEX TechnologyRegistered in the U. S. Patent and Trademark Office and offered

through Lockhart Geophysical

GravStat™A method of determining seismic statics

from gravity data.

An OEX TechnologyRegistered in the U.S. Patent and Trademark Office offered through

Lockhart Geophysical.

Page 2: GravStat™ A OEX Technology Registered in the U. S. Patent and Trademark Office and offered through Lockhart Geophysical GravStat™ A method of determining

GravStat™ A OEX TechnologyRegistered in the U. S. Patent and Trademark Office and offered

through Lockhart Geophysical

What is the goal of GravStat™?

To determine seismic statics through the interpretation of high spatial frequency gravity anomalies caused by lateral changes in near surface geology.

Page 3: GravStat™ A OEX Technology Registered in the U. S. Patent and Trademark Office and offered through Lockhart Geophysical GravStat™ A method of determining

GravStat™ A OEX TechnologyRegistered in the U. S. Patent and Trademark Office and offered

through Lockhart Geophysical

GravStat™ Model

d (ft)

D (ft)

²g (mgal)

static t (ms)

Psw—Vsw

Pw—Vw

Psw > Pw

Page 4: GravStat™ A OEX Technology Registered in the U. S. Patent and Trademark Office and offered through Lockhart Geophysical GravStat™ A method of determining

GravStat™ A OEX TechnologyRegistered in the U. S. Patent and Trademark Office and offered

through Lockhart Geophysical

Datum Velocity & Bouguer Density

Page 5: GravStat™ A OEX Technology Registered in the U. S. Patent and Trademark Office and offered through Lockhart Geophysical GravStat™ A method of determining

GravStat™ A OEX TechnologyRegistered in the U. S. Patent and Trademark Office and offered

through Lockhart Geophysical

Pb = 1.7 g/ccPb = 2.6 g/cc

Nettleton Density Profile

Pb = 2.2 g/cc

Pw = 2.2 g/cc; Vw = 8370 ft/sec Vw = 2550 m/sec

Page 6: GravStat™ A OEX Technology Registered in the U. S. Patent and Trademark Office and offered through Lockhart Geophysical GravStat™ A method of determining

GravStat™ A OEX TechnologyRegistered in the U. S. Patent and Trademark Office and offered

through Lockhart Geophysical

Bouguer Density Analysis in Sandunes

Page 7: GravStat™ A OEX Technology Registered in the U. S. Patent and Trademark Office and offered through Lockhart Geophysical GravStat™ A method of determining

GravStat™ A OEX TechnologyRegistered in the U. S. Patent and Trademark Office and offered

through Lockhart Geophysical

Density and Velocity are relatedby Gardner's Equation:

P = 0.23 V1

4

V (feet/sec)P (g/cc)

Page 8: GravStat™ A OEX Technology Registered in the U. S. Patent and Trademark Office and offered through Lockhart Geophysical GravStat™ A method of determining

GravStat™ A OEX TechnologyRegistered in the U. S. Patent and Trademark Office and offered

through Lockhart Geophysical

GravStat™ Model

d (ft)

D (ft)

²g (mgal)

static t (ms)

Psw—Vsw

Pw—Vw

Psw > Pw

Weathering Layer4000 ft/sec1219 m/sec

Sub Weathering Layer8000 ft/sec2438 m/sec

Page 9: GravStat™ A OEX Technology Registered in the U. S. Patent and Trademark Office and offered through Lockhart Geophysical GravStat™ A method of determining

GravStat™ A OEX TechnologyRegistered in the U. S. Patent and Trademark Office and offered

through Lockhart Geophysical

ms/mGal Nomogram

28 ms/mGal

17 ms/mGal6000

Page 10: GravStat™ A OEX Technology Registered in the U. S. Patent and Trademark Office and offered through Lockhart Geophysical GravStat™ A method of determining

GravStat™ A OEX TechnologyRegistered in the U. S. Patent and Trademark Office and offered

through Lockhart Geophysical

Bouguer Density Analysis in Sandunes

Page 11: GravStat™ A OEX Technology Registered in the U. S. Patent and Trademark Office and offered through Lockhart Geophysical GravStat™ A method of determining

GravStat™ A OEX TechnologyRegistered in the U. S. Patent and Trademark Office and offered

through Lockhart Geophysical

GravStat™ Statics in Sandunes

Page 12: GravStat™ A OEX Technology Registered in the U. S. Patent and Trademark Office and offered through Lockhart Geophysical GravStat™ A method of determining

GravStat™ A OEX TechnologyRegistered in the U. S. Patent and Trademark Office and offered

through Lockhart Geophysical

The GravStat™ Method

• Acquire un-aliased gravity data coincident with the seismic source and receiver locations.

• Remove elevation, topographic and regional effects from the gravity data.

• Invert the high frequency residual gravity data into a surface consistent static correction.

• Calculate and apply the statics optimizing the regional gravity and the GravStat™ inversion.

• Analyze the processed seismic data for clarity and accuracy to known geology.

Page 13: GravStat™ A OEX Technology Registered in the U. S. Patent and Trademark Office and offered through Lockhart Geophysical GravStat™ A method of determining

GravStat™ A OEX TechnologyRegistered in the U. S. Patent and Trademark Office and offered

through Lockhart Geophysical

The GravStat™ Method

• Acquire un-aliased gravity data coincident with the seismic source and receiver locations.

• Remove elevation, topographic and regional effects from the gravity data.

• Invert the high frequency residual gravity data into a surface consistent static correction.

• Calculate and apply the statics optimizing the regional gravity and the GravStat™ inversion.

• Analyze the processed seismic data for clarity and accuracy to known geology.

Page 14: GravStat™ A OEX Technology Registered in the U. S. Patent and Trademark Office and offered through Lockhart Geophysical GravStat™ A method of determining

GravStat™ A OEX TechnologyRegistered in the U. S. Patent and Trademark Office and offered

through Lockhart Geophysical

Spatial Aliasing of Gravity Data

Page 15: GravStat™ A OEX Technology Registered in the U. S. Patent and Trademark Office and offered through Lockhart Geophysical GravStat™ A method of determining

GravStat™ A OEX TechnologyRegistered in the U. S. Patent and Trademark Office and offered

through Lockhart Geophysical

Typical 3D Survey Designs

Page 16: GravStat™ A OEX Technology Registered in the U. S. Patent and Trademark Office and offered through Lockhart Geophysical GravStat™ A method of determining

GravStat™ A OEX TechnologyRegistered in the U. S. Patent and Trademark Office and offered

through Lockhart Geophysical

3D Survey Design-1 (660 feet)

0.

1320.

2640.

3960.

5280.

5280. 3960. 2640. 1320. 0.

Page 17: GravStat™ A OEX Technology Registered in the U. S. Patent and Trademark Office and offered through Lockhart Geophysical GravStat™ A method of determining

GravStat™ A OEX TechnologyRegistered in the U. S. Patent and Trademark Office and offered

through Lockhart Geophysical

3D Survey Design-2 (660 feet)

Page 18: GravStat™ A OEX Technology Registered in the U. S. Patent and Trademark Office and offered through Lockhart Geophysical GravStat™ A method of determining

GravStat™ A OEX TechnologyRegistered in the U. S. Patent and Trademark Office and offered

through Lockhart Geophysical

3D Survey Design-3 (660 feet)

Page 19: GravStat™ A OEX Technology Registered in the U. S. Patent and Trademark Office and offered through Lockhart Geophysical GravStat™ A method of determining

GravStat™ A OEX TechnologyRegistered in the U. S. Patent and Trademark Office and offered

through Lockhart Geophysical

3D Survey Design-4 (440 feet)

Page 20: GravStat™ A OEX Technology Registered in the U. S. Patent and Trademark Office and offered through Lockhart Geophysical GravStat™ A method of determining

GravStat™ A OEX TechnologyRegistered in the U. S. Patent and Trademark Office and offered

through Lockhart Geophysical

3D Survey Design-5 (300 feet)

Page 21: GravStat™ A OEX Technology Registered in the U. S. Patent and Trademark Office and offered through Lockhart Geophysical GravStat™ A method of determining

GravStat™ A OEX TechnologyRegistered in the U. S. Patent and Trademark Office and offered

through Lockhart Geophysical

The GravStat™ Method

• Acquire un-aliased gravity data coincident with the seismic source and receiver locations.

• Remove elevation, topographic and regional effects from the gravity data.

• Invert the high frequency residual gravity data into a surface consistent static correction.

• Calculate and apply the statics optimizing the regional gravity and the GravStat™ inversion.

• Analyze the processed seismic data for clarity and accuracy to known geology.

Page 22: GravStat™ A OEX Technology Registered in the U. S. Patent and Trademark Office and offered through Lockhart Geophysical GravStat™ A method of determining

GravStat™ A OEX TechnologyRegistered in the U. S. Patent and Trademark Office and offered

through Lockhart Geophysical

Bouguer Gravity Map (Delaware Basin)

Page 23: GravStat™ A OEX Technology Registered in the U. S. Patent and Trademark Office and offered through Lockhart Geophysical GravStat™ A method of determining

GravStat™ A OEX TechnologyRegistered in the U. S. Patent and Trademark Office and offered

through Lockhart Geophysical

The GravStat™ Method

• Acquire un-aliased gravity data coincident with the seismic source and receiver locations.

• Remove elevation, topographic and regional effects from the gravity data.

• Invert the high frequency residual gravity data into a surface consistent static correction.

• Calculate and apply the statics optimizing the regional gravity and the GravStat™ inversion.

• Analyze the processed seismic data for clarity and accuracy to known geology.

Page 24: GravStat™ A OEX Technology Registered in the U. S. Patent and Trademark Office and offered through Lockhart Geophysical GravStat™ A method of determining

GravStat™ A OEX TechnologyRegistered in the U. S. Patent and Trademark Office and offered

through Lockhart Geophysical

GravStat™ Static Map (Delaware Basin)

Page 25: GravStat™ A OEX Technology Registered in the U. S. Patent and Trademark Office and offered through Lockhart Geophysical GravStat™ A method of determining

GravStat™ A OEX TechnologyRegistered in the U. S. Patent and Trademark Office and offered

through Lockhart Geophysical

The GravStat Method

• Acquire un-aliased gravity data coincident with the seismic source and receiver locations.

• Remove elevation, topographic and regional effects from the gravity data.

• Invert the high frequency residual gravity data into a surface consistent static correction.

• Calculate and apply the statics optimizing the regional gravity and the GravStat™ inversion.

• Analyze the processed seismic data for clarity and accuracy to known geology.

Page 26: GravStat™ A OEX Technology Registered in the U. S. Patent and Trademark Office and offered through Lockhart Geophysical GravStat™ A method of determining

GravStat™ A OEX TechnologyRegistered in the U. S. Patent and Trademark Office and offered

through Lockhart Geophysical

3D Shot RecordOnly elevation statics applied

Page 27: GravStat™ A OEX Technology Registered in the U. S. Patent and Trademark Office and offered through Lockhart Geophysical GravStat™ A method of determining

GravStat™ A OEX TechnologyRegistered in the U. S. Patent and Trademark Office and offered

through Lockhart Geophysical

3D Shot RecordElevation andGravstat™ statics

Page 28: GravStat™ A OEX Technology Registered in the U. S. Patent and Trademark Office and offered through Lockhart Geophysical GravStat™ A method of determining

GravStat™ A OEX TechnologyRegistered in the U. S. Patent and Trademark Office and offered

through Lockhart Geophysical

The GravStat Method

• Acquire un-aliased gravity data coincident with the seismic source and receiver locations.

• Remove elevation, topographic and regional effects from the gravity data.

• Invert the high frequency residual gravity data into a surface consistent static correction.

• Calculate and apply the statics optimizing the regional gravity and the GravStat™ inversion.

• Analyze the processed seismic data for clarity and accuracy to known geology.

Page 29: GravStat™ A OEX Technology Registered in the U. S. Patent and Trademark Office and offered through Lockhart Geophysical GravStat™ A method of determining

GravStat™ A OEX TechnologyRegistered in the U. S. Patent and Trademark Office and offered

through Lockhart Geophysical

Refraction Statics Section (glacial till)

Page 30: GravStat™ A OEX Technology Registered in the U. S. Patent and Trademark Office and offered through Lockhart Geophysical GravStat™ A method of determining

GravStat™ A OEX TechnologyRegistered in the U. S. Patent and Trademark Office and offered

through Lockhart Geophysical

GravStat™ Statics Section (glacial till)

Page 31: GravStat™ A OEX Technology Registered in the U. S. Patent and Trademark Office and offered through Lockhart Geophysical GravStat™ A method of determining

GravStat™ A OEX TechnologyRegistered in the U. S. Patent and Trademark Office and offered

through Lockhart Geophysical

Set A - Refraction Statics without Autostatics

Page 32: GravStat™ A OEX Technology Registered in the U. S. Patent and Trademark Office and offered through Lockhart Geophysical GravStat™ A method of determining

GravStat™ A OEX TechnologyRegistered in the U. S. Patent and Trademark Office and offered

through Lockhart Geophysical

Set B - GravStat Statics without Autostatics

Page 33: GravStat™ A OEX Technology Registered in the U. S. Patent and Trademark Office and offered through Lockhart Geophysical GravStat™ A method of determining

GravStat™ A OEX TechnologyRegistered in the U. S. Patent and Trademark Office and offered

through Lockhart Geophysical

Set C - Final Refraction Static Section

Page 34: GravStat™ A OEX Technology Registered in the U. S. Patent and Trademark Office and offered through Lockhart Geophysical GravStat™ A method of determining

GravStat™ A OEX TechnologyRegistered in the U. S. Patent and Trademark Office and offered

through Lockhart Geophysical

Set D - Final GravStat Static Section

Page 35: GravStat™ A OEX Technology Registered in the U. S. Patent and Trademark Office and offered through Lockhart Geophysical GravStat™ A method of determining

GravStat™ A OEX TechnologyRegistered in the U. S. Patent and Trademark Office and offered

through Lockhart Geophysical

Advantages of GravStat™

• High velocity over low.• Not dependent on the quality of the seismic first

breaks.• Automatically compensates for velocity

variations in the weathering and sub-weathering.• Long period statics are resolved.• Subtle features such as faults are more clearly

imaged with GravStat™ reason less autostatic smear.

Page 36: GravStat™ A OEX Technology Registered in the U. S. Patent and Trademark Office and offered through Lockhart Geophysical GravStat™ A method of determining

GravStat™ A OEX TechnologyRegistered in the U. S. Patent and Trademark Office and offered

through Lockhart Geophysical

Advantages of GravStat™

• High velocity over low.• Not dependent on the quality of the seismic first

breaks.• Automatically compensates for velocity

variations in the weathering and sub-weathering.• Long period statics are resolved.• Subtle features such as faults are more clearly

imaged with GravStat™ reason less autostatic smear.

• THE SEISMIC WILL NOW TIE TO THE WELLS

Page 37: GravStat™ A OEX Technology Registered in the U. S. Patent and Trademark Office and offered through Lockhart Geophysical GravStat™ A method of determining

GravStat™ A OEX TechnologyRegistered in the U. S. Patent and Trademark Office and offered

through Lockhart Geophysical

A Kansas example how GravStat™ was used to tie to

known well control.

This example is a comparison of two interpretations; one using seismic data processed with refraction, and the other

using seismic data processed using GravStat™.

Page 38: GravStat™ A OEX Technology Registered in the U. S. Patent and Trademark Office and offered through Lockhart Geophysical GravStat™ A method of determining

GravStat™ A OEX TechnologyRegistered in the U. S. Patent and Trademark Office and offered

through Lockhart Geophysical

Refraction - Interpretation

• The following three slides show a structural interpretation using seismic data processed with refraction statics.

• The survey is over a producing field - well control is shown by the green dots.

• Note how much the refraction velocity map must be distorted to tie to the known well control.

Page 39: GravStat™ A OEX Technology Registered in the U. S. Patent and Trademark Office and offered through Lockhart Geophysical GravStat™ A method of determining

GravStat™ A OEX TechnologyRegistered in the U. S. Patent and Trademark Office and offered

through Lockhart Geophysical

Refraction - Time Structure1046

104510

44

1044

1043

10

43

10

42

1041

10

41

10

40

1040

10

39

1039

10

38

1038

1038

10

38

1038

1037

10

37

10

37

1036

1036

1036

1035

1035

10

34

10

34

1033

1033

1032

886,399

886,399

887,592

887,592

888,785

888,785

889,978

889,978

891,171

891,171

892,364

892,364

893,557

893,557

894,750

894,7505

69

,06

15

70

,25

45

71

,44

75

72

,64

05

73

,83

35

75

,02

6

56

9,0

61

57

0,2

54

57

1,4

47

57

2,6

40

57

3,8

33

57

5,0

26

Contour interval = 1ms

Page 40: GravStat™ A OEX Technology Registered in the U. S. Patent and Trademark Office and offered through Lockhart Geophysical GravStat™ A method of determining

GravStat™ A OEX TechnologyRegistered in the U. S. Patent and Trademark Office and offered

through Lockhart Geophysical

Refraction - Velocity to Depth4675

4675

4675

4650

4650

46504625

4625

46

25

4600

887,000

887,000

888,000

888,000

889,000

889,000

890,000

890,000

891,000

891,000

892,000

892,000

893,000

893,000

894,000

894,000

895,000

895,000

896,000

896,0005

69

,00

05

70

,00

05

71

,00

05

72

,00

05

73

,00

05

74

,00

05

75

,00

0

56

9,0

00

57

0,0

00

57

1,0

00

57

2,0

00

57

3,0

00

57

4,0

00

57

5,0

00

Contour interval = 5’/sec.

Page 41: GravStat™ A OEX Technology Registered in the U. S. Patent and Trademark Office and offered through Lockhart Geophysical GravStat™ A method of determining

GravStat™ A OEX TechnologyRegistered in the U. S. Patent and Trademark Office and offered

through Lockhart Geophysical

Refraction - Depth Map

-1080-1080

-1100-1100 -1120

-1120

-1120

-1140

-1140

-114

0

-1160

-116

0

887,000

887,000

888,000

888,000

889,000

889,000

890,000

890,000

891,000

891,000

892,000

892,000

893,000

893,000

894,000

894,000

895,000

895,000

896,000

896,0005

69

,00

05

70

,00

05

71

,00

05

72

,00

05

73

,00

05

74

,00

05

75

,00

0

56

9,0

00

57

0,0

00

57

1,0

00

57

2,0

00

57

3,0

00

57

4,0

00

57

5,0

00

Contour interval = 4 feet

Page 42: GravStat™ A OEX Technology Registered in the U. S. Patent and Trademark Office and offered through Lockhart Geophysical GravStat™ A method of determining

GravStat™ A OEX TechnologyRegistered in the U. S. Patent and Trademark Office and offered

through Lockhart Geophysical

GravStat™ - Interpretation

• The following three slides show a structural interpretation using seismic data processed with GravStat™ statics.

• As before, the well control is shown by the green dots.• Note how well-behaved and generally-flat the

calculated velocity map is compared to the refraction velocity map.

• Also note the similarities between the GravStat™ Time and Depth Maps.

Page 43: GravStat™ A OEX Technology Registered in the U. S. Patent and Trademark Office and offered through Lockhart Geophysical GravStat™ A method of determining

GravStat™ A OEX TechnologyRegistered in the U. S. Patent and Trademark Office and offered

through Lockhart Geophysical

GravStat™ - Time Structure1210

12

08

1207

12

07

12

06

1206

1205

12

05

12

04

12

04

1203

12

03

1203

1202

12

02

1201

1201

1200

12

00

1199

119

9

119

8

119

8

119

7

119

7

119

7

119

6

1196

119611

95

1195

119

5

119

4

119

4

1194

119

4

119411

93

119

3

1193

1193

1193

1192

119

2

1192

1192

119

1

1191

119

1

1191

119

1

119

0

1190

1190

1190

118

9

1189

118

9

1189

118

81188

1188

118

7

1187

118

7

118

6

1186

1185

1184

887,000

887,000

888,000

888,000

889,000

889,000

890,000

890,000

891,000

891,000

892,000

892,000

893,000

893,000

894,000

894,000

895,000

895,000

896,000

896,0005

69

,00

05

70

,00

05

71

,00

05

72

,00

05

73

,00

05

74

,00

05

75

,00

0

56

9,0

00

57

0,0

00

57

1,0

00

57

2,0

00

57

3,0

00

57

4,0

00

57

5,0

00

Contour interval = 1ms

Page 44: GravStat™ A OEX Technology Registered in the U. S. Patent and Trademark Office and offered through Lockhart Geophysical GravStat™ A method of determining

GravStat™ A OEX TechnologyRegistered in the U. S. Patent and Trademark Office and offered

through Lockhart Geophysical

GravStat™ - Velocity to Depth

4050

4050

4050

4050

887,000

887,000

888,000

888,000

889,000

889,000

890,000

890,000

891,000

891,000

892,000

892,000

893,000

893,000

894,000

894,000

895,000

895,000

896,000

896,0005

69

,00

05

70

,00

05

71

,00

05

72

,00

05

73

,00

05

74

,00

05

75

,00

0

56

9,0

00

57

0,0

00

57

1,0

00

57

2,0

00

57

3,0

00

57

4,0

00

57

5,0

00

Contour interval = 5’/sec.

Page 45: GravStat™ A OEX Technology Registered in the U. S. Patent and Trademark Office and offered through Lockhart Geophysical GravStat™ A method of determining

GravStat™ A OEX TechnologyRegistered in the U. S. Patent and Trademark Office and offered

through Lockhart Geophysical

GravStat™ - Depth Map

-1120-1120

-112

0

-112

0

-1140-1140

-1140

-1140

-1160

-1160

-11

80

-118

0

887,000

887,000

888,000

888,000

889,000

889,000

890,000

890,000

891,000

891,000

892,000

892,000

893,000

893,000

894,000

894,000

895,000

895,000

896,000

896,0005

69

,00

05

70

,00

05

71

,00

05

72

,00

05

73

,00

05

74

,00

05

75

,00

0

56

9,0

00

57

0,0

00

57

1,0

00

57

2,0

00

57

3,0

00

57

4,0

00

57

5,0

00

Contour interval = 4 feet

Page 46: GravStat™ A OEX Technology Registered in the U. S. Patent and Trademark Office and offered through Lockhart Geophysical GravStat™ A method of determining

GravStat™ A OEX TechnologyRegistered in the U. S. Patent and Trademark Office and offered

through Lockhart Geophysical

Refraction - Depth Map

-1080-1080

-1100-1100 -1120

-1120

-1120

-1140

-1140

-114

0

-1160

-116

0

887,000

887,000

888,000

888,000

889,000

889,000

890,000

890,000

891,000

891,000

892,000

892,000

893,000

893,000

894,000

894,000

895,000

895,000

896,000

896,0005

69

,00

05

70

,00

05

71

,00

05

72

,00

05

73

,00

05

74

,00

05

75

,00

0

56

9,0

00

57

0,0

00

57

1,0

00

57

2,0

00

57

3,0

00

57

4,0

00

57

5,0

00

Contour interval = 4 feet

Page 47: GravStat™ A OEX Technology Registered in the U. S. Patent and Trademark Office and offered through Lockhart Geophysical GravStat™ A method of determining

GravStat™ A OEX TechnologyRegistered in the U. S. Patent and Trademark Office and offered

through Lockhart Geophysical

GravStat™ - Depth Map

-1120-1120

-112

0

-112

0

-1140-1140

-1140

-1140

-1160

-1160

-11

80

-118

0

887,000

887,000

888,000

888,000

889,000

889,000

890,000

890,000

891,000

891,000

892,000

892,000

893,000

893,000

894,000

894,000

895,000

895,000

896,000

896,0005

69

,00

05

70

,00

05

71

,00

05

72

,00

05

73

,00

05

74

,00

05

75

,00

0

56

9,0

00

57

0,0

00

57

1,0

00

57

2,0

00

57

3,0

00

57

4,0

00

57

5,0

00

Contour interval = 4 feet

Page 48: GravStat™ A OEX Technology Registered in the U. S. Patent and Trademark Office and offered through Lockhart Geophysical GravStat™ A method of determining

GravStat™ A OEX TechnologyRegistered in the U. S. Patent and Trademark Office and offered

through Lockhart Geophysical

GravStat™ - Time Structure1210

12

08

1207

12

07

12

06

1206

1205

12

05

12

04

12

04

1203

12

03

1203

1202

12

02

1201

1201

1200

12

00

1199

119

9

119

8

119

8

119

7

119

7

119

7

119

6

1196

119611

95

1195

119

5

119

4

119

4

1194

119

4

119411

93

119

3

1193

1193

1193

1192

119

2

1192

1192

119

1

1191

119

1

1191

119

1

119

0

1190

1190

1190

118

9

1189

118

9

1189

118

81188

1188

118

7

1187

118

7

118

6

1186

1185

1184

887,000

887,000

888,000

888,000

889,000

889,000

890,000

890,000

891,000

891,000

892,000

892,000

893,000

893,000

894,000

894,000

895,000

895,000

896,000

896,0005

69

,00

05

70

,00

05

71

,00

05

72

,00

05

73

,00

05

74

,00

05

75

,00

0

56

9,0

00

57

0,0

00

57

1,0

00

57

2,0

00

57

3,0

00

57

4,0

00

57

5,0

00

Contour interval = 1ms

Page 49: GravStat™ A OEX Technology Registered in the U. S. Patent and Trademark Office and offered through Lockhart Geophysical GravStat™ A method of determining

GravStat™ A OEX TechnologyRegistered in the U. S. Patent and Trademark Office and offered

through Lockhart Geophysical

Refraction - Time Structure1046

104510

44

1044

1043

10

43

10

42

1041

10

41

10

40

1040

10

39

1039

10

38

1038

1038

10

38

1038

1037

10

37

10

37

1036

1036

1036

1035

1035

10

34

10

34

1033

1033

1032

886,399

886,399

887,592

887,592

888,785

888,785

889,978

889,978

891,171

891,171

892,364

892,364

893,557

893,557

894,750

894,7505

69

,06

15

70

,25

45

71

,44

75

72

,64

05

73

,83

35

75

,02

6

56

9,0

61

57

0,2

54

57

1,4

47

57

2,6

40

57

3,8

33

57

5,0

26

Contour interval = 1ms

Page 50: GravStat™ A OEX Technology Registered in the U. S. Patent and Trademark Office and offered through Lockhart Geophysical GravStat™ A method of determining

GravStat™ A OEX TechnologyRegistered in the U. S. Patent and Trademark Office and offered

through Lockhart Geophysical

Conclusions

• The GravStat™ time structure map mimics the actual well control more accurately than the refraction time structure map.

• The GravStat™ velocity map is flatter, allowing for greater confidence in predicting prospects away from the existing well control.

• The time structure on the refraction static interpretation in the SW corner of the survey is probably not a valid prospect.

Page 51: GravStat™ A OEX Technology Registered in the U. S. Patent and Trademark Office and offered through Lockhart Geophysical GravStat™ A method of determining

GravStat™ A OEX TechnologyRegistered in the U. S. Patent and Trademark Office and offered

through Lockhart Geophysical

Predicted Well Tie Results

GravStat

Refraction

Page 52: GravStat™ A OEX Technology Registered in the U. S. Patent and Trademark Office and offered through Lockhart Geophysical GravStat™ A method of determining

GravStat™ A OEX TechnologyRegistered in the U. S. Patent and Trademark Office and offered

through Lockhart Geophysical

ZEN...........ZEN........... and the Art of Small, Prospect Specific 3D Seismic Surveys in Oil and Gas Exploration

William A. Miller, CPG, PE

Page 53: GravStat™ A OEX Technology Registered in the U. S. Patent and Trademark Office and offered through Lockhart Geophysical GravStat™ A method of determining

GravStat™ A OEX TechnologyRegistered in the U. S. Patent and Trademark Office and offered

through Lockhart Geophysical

AN ATTEMPT TO QUANTIFY AN ATTEMPT TO QUANTIFY CONFIDENCE IN MAPPING CONFIDENCE IN MAPPING

STRUCTURESSTRUCTURES

Assuming Vint=7 ft/msec and picking accuracy of 1 msec, then express ConfidenceConfidence as:1-(accuracy in ft/structural relief)1-(accuracy in ft/structural relief)

– for 10’ of structure: Confidence=1-7/10 or 30%– for 14’ of structure: Confidence=1-7/14 or 50%– for 21’ of structure: Confidence=1-7/21 or 66%– for 28’ of structure: Confidence=1-7/28 or 75%

William A. Miller, CPG, PE

Page 54: GravStat™ A OEX Technology Registered in the U. S. Patent and Trademark Office and offered through Lockhart Geophysical GravStat™ A method of determining

GravStat™ A OEX TechnologyRegistered in the U. S. Patent and Trademark Office and offered

through Lockhart Geophysical

Economics of GravStat™

A typically GravStat™ survey only adds 10% to the 3D seismic survey.

The true cost of a GravStat™ survey is considerably less if one considers the cost of drilling a dry hole!