grab kits - ab sealsabseals.com.au/wp-content/uploads/2015/07/ab-seals-grab-kits-ver...220 nitrile...
TRANSCRIPT
-
Ver 15.06.25 1
AB SEALS PTY. LTD. ABN 14 602 544 632
SEALS YOU CAN RELY ON
GRAB KITS O-RINGS
BONDED WASHERS, FLANGE SEALS
FITTINGS SEALS
O-RING TOOLS, LUBRICANTS
EFFECTIVE 1ST JANUARY 2015
3 Welch St
Underwood QLD 4119
Ph 07 3341 1200
Fax 07 3341 9399
Email [email protected]
1/1880 Hume Hwy
Campbellfield VIC 3061
Ph 03 9357 0451
Fax 03 9357 5876
Email [email protected]
-
Ver 15.06.25 2
We are proud to announce the release of a new range of Maxi O-Ring kits, possible the most comprehensive
kits available in the Australian marketplace. Each consists of 5 compartmented assortment boxes contained in a
rugged carry case. These are a must for any service van or as a workshop stock assortment.
-
Ver 15.06.25 3
ORK-MAXI FITTING $ 775.10 2
965 Assorted O-Rings (Nitrile 90 Duro), Flaretites, D-Rings, Bonded Washers, Retainers to suit UNO, SAE & Cat Flanges, BSP, ORFS, JIC fittings
UNO O-RINGS NITRILE 90 DURO
TO SUIT QTY TO SUIT QTY
0.437" -07 20 1.062" -17 20
0.562" -09 20 1.312" -21 5
0.750" -12 20 1.625" -26 5
0.875" -14 20 1.875" -30 5
SAE FLANGE O-RINGS NITRILE 90 DURO
0.500" -08 20 2.000" -32 10
0.625" -10 20 2.500" -40 10
0.750" -12 20 3.000" -48 2
1.000" -16 20 3.500" -56 2
1.250" -20 20 4.000" -64 2
1.500" -24 20 5.000" -80 2
BSP O-RINGS NITRILE 90 DURO
0.125" -02 20 1.000" -16 20
0.250" -04 20 1.250" -20 20
0.375" -06 20 1.500" -24 20
0.500" -08 20 2.000" -32 5
0.750" -12 20
ORFS O-RINGS NITRILE 90 DURO
0.562" -09 20 1.187" -19 20
0.687" -11 20 1.437" -23 20
0.812" -13 20 1.687" -27 20
1.000" -16 20 2.000" -32 20
JIC FLARETITE SEALS
0.437" -07 5 1.062" -17 5
0.562" -09 5 1.312" -21 5
0.750" -12 5 1.625" -26 5
0.875" -14 5
D-RINGS TO SUIT CAT FLANGES
0.750" 5 1.500" 3
1.000" 5 1.750" 2
1.250" 5 2.000" 2
BSP BONDED WASHERS
0.125" -02 10 0.750" -12 10
0.250" -04 10 0.875" -14 10
0.375" -06 10 1.000" -16 10
0.500" -08 10 1.250" -20 5
0.625" -10 10 1.500" -24 5
BSP RETAINING RINGS
0.125" -02 10 0.750" -12 10
0.250" -04 10 1.000" -16 10
0.375" -06 10 1.250" -20 5
0.500" -08 10 1.500" -24 5
-
Ver 15.06.25 4
ORK-MAXI IMP N7 $ 398.28 2
1195 Imperial British Standard Nitrile 70 Duro O-Rings
220 Nitrile 90 Duro O-Rings to suit SAE-J518c Flanges and UNO fittings
ORK-MAXI IMP N9 $ 423.33 2
1195 Imperial British Standard Nitrile 90 Duro O-Rings
220 Nitrile 90 Duro O-Rings to suit SAE-J518c Flanges and UNO fittings
Contents of both ORK-MAXI IMP kits are listed below as arranged in kit.
We will also offer these kits in Viton 75 & 90 Duro, Neoprene 70 Duro, EPDM 75 Duro, Silicone 70 Duro and
Nitrile 90 Duro Contoured Backups on request.
Empty boxes and Cases are available as a set (ORK-MAXI BOX) @ $100.00 per set.
UNO / BOSS O-RINGS
903 25 908 25
904 25 910 25
905 25 912 15
906 25 916 10
SAE FLANGE O-RINGS
BS210 10 BS222 5
BS214 10 BS225 5
BS219 10 BS228 5
1/16" CROSS SECTION
BS006-018 25 BS022-028 15
BS019-021 20 BS029-030 10
3/32 CROSS SECTION
BS109-118 25 BS131 10
BS119-120 20 BS133 10
BS121-127 15 BS135 5
BS128 10
1/8" CROSS SECTION
BS210-214 20 BS228 10
BS215-222 15 BS232 10
BS223-224 10 BS236 10
BS226 10
-
Ver 15.06.25 5
ORK-MAXI MET N7 $ 658.23 2
Contains
1350 European Standard Metric Nitrile 70 Duro O-Rings sorted by cross section
Contents of ORK-MAXI MET listed below as arranged in kit
1.00MM CROSS SECTION
ID (MM) QTY ID (MM) QTY ID (MM) QTY
10.00 10 16.00 10 23.00 10
12.00 10 18.00 10 24.00 10
14.00 10 20.00 10
1.50MM CROSS SECTION
21.00 10 24.00 10 28.00 10
22.00 10 26.00 10 30.00 10
2.00MM CROSS SECTION
3.00 25 14.00 25 27.00 15
4.00 25 16.00 25 28.00 15
5.00 25 17.00 25 30.00 15
6.00 25 19.00 25 32.00 15
8.00 25 20.00 20 33.00 15
10.00 25 22.00 20 35.00 15
11.00 25 24.00 20 38.00 10
13.00 25 25.00 15 41.00 10
2.50MM CROSS SECTION
8.00 25 21.00 25 33.00 15
10.00 25 22.00 25 35.00 15
11.00 25 24.00 20 36.00 15
13.00 25 25.00 20 38.00 10
14.00 25 27.00 15 40.00 10
16.00 25 28.00 15 43.00 10
18.00 25 30.00 15 46.00 10
19.00 25 32.00 15 49.00 10
3.00MM CROSS SECTION
19.00 20 30.00 15 41.00 10
21.00 20 32.00 15 44.00 10
22.00 20 33.00 15 50.00 10
24.00 20 35.00 15 57.00 10
25.00 20 36.00 15 70.00 10
27.00 15 38.00 15 82.00 10
28.00 15
-
Ver 15.06.25 6
AB SEALS O-RING KITS These kits are assembled in house by AB Seals and are available in 20 compartment clear boxes 355mm x
275mm x 55mm. They can be provided with customized color lid inserts showing you logo and contact details.
ORK-ORFS/UNO/SAE $ 157.50 2
Can be Supplied Marked with J.I.Case, Caterpillar or John Deere equivalent numbers
Contains
20 each Nitrile 90 Duro O-Rings for ORFS -09 to -27
20 each Nitrile 90 Duro O-Rings for SAE-J518c-12 to -20 Code 61 & 62 Flanges
20 each Nitrile 90 Duro O-Rings for UNO -07 to -21
10 each Nitrile 90 Duro O-Rings for UNO -26 to -30
ORK-ORFS/UNO/SAE V9 $ 986.65 2
Can be Supplied Marked with J.I.Case, Caterpillar or John Deere equivalent numbers
Contains
20 each Viton 90 Duro O-Rings for ORFS -09 to -27
20 each Viton 90 Duro O-Rings for SAE-J518c-12 to -20 Code 61 & 62 Flanges
20 each Viton 90 Duro O-Rings for UNO -07 to -21
10 each Viton 90 Duro O-Rings for UNO -26 to -30
ORK-BSP FITTING $ 198.79 2
Contains
20 each Nitrile 90 Duro O-Rings for BSP-02 to -32
5 each Bonded Washers for BSP-02 to -16
4 each metal Retainer Rings (used with O-Rings) for BSP-04 to -16
ORK-BWBSP $ 251.06 2
Contains
10 each Bonded Washers for BSP-02 to -16
5 each Bonded Washers for BSP-20 to -24
ORK-BWM $ 301.50 2
Contains
10 each Bonded Washers for M5 to M30
5 each Bonded Washers for M33 to M48
ORK-1/8 N7 $ 178.87 2
Contains
Total of 300 British Standard Imperial Nitrile 70 Duro O-Rings
BS209 to BS228
ORK-1/8 N9 $ 226.57 2
Contains
Total of 300 British Standard Imperial Nitrile 90 Duro O-Rings
BS209 to BS228
-
Ver 15.06.25 7
ORK-1/8 BU $ 329.30 2
Contains
Total of 300 British Standard Imperial Nitrile Contoured Backups
BS209 to BS228
ORK-1/8 E7 $ 558.43 2
Contains
Total of 300 British Standard Imperial EPDM 75 Duro O-Rings
BS209 to BS228
ORK-1/8 V7 $ 1356.02 2
Contains
Total of 300 British Standard Imperial Viton 75 Duro O-Rings
BS209 to BS228
ORK-1/8 S7 $ 752.50 2
Contains
Total of 300 British Standard Imperial Silicone 70 Duro O-Rings
BS209 to BS228
CATERPILLAR EQUIVALENT O-RING KITS O-Ring kits are supplied in sturdy briefcase type boxes, with the smaller sizes contained in sturdy Ziploc bags.
D-Ring kits are supplied in compartmented boxes. Caterpillar numbers are listed as a reference only, all parts
are aftermarket.
ORK-4C4782 $ 250.43 2
Contains
570 Nitrile O-Rings in the 32 most popular Caterpillar sizes, covering fittings, valves and pumps
ORK-4C8253 $ 457.11 2
Contains
148 yellow Silicone O-Rings in 32 popular Caterpillar sizes, all listed by Caterpillar equivalent part number
ORK-4C4784 $ 250.43 2
Contains
10 each 1P3700 to 1P3707 ( to 2 1/8) D-Rings
5 each 1P3708 to 1P3709 (2 to 2 ) D-Rings
-
Ver 15.06.25 8
At AB Seals we are happy to design and assemble custom grab kits from our huge range of stock lines. These
can be labeled with your own part numbers for each item and supplied with a full color laminated lid inserts.
These can also bear your company logos and contact details.
Some of our existing customized kits include special material O-Ring kits, washer assortments, complete
machinery spare part and service kits. The only limitation is if the parts will fit!
Our standard container is 20 compartments and measures 355mm x 275mm x 55mm, but many others are
available at short lead times.
Any standard Nitrile O-Ring kit can also be converted to the corresponding backup kit or
alternative material kit providing all components are available
-
Ver 15.06.25 9
These sets of 5 o-ring kits represent the best value for money.
5 complete grab kits for the same price as one genuine kit.
No compromises made on material quality.
We buy in bulk to pass the savings onto you.
ORK-OK2SETN7 SET OF 5 O-RING GRAB KITS NITRILE 70 DURO
CONTAINS THE FOLLOWING KITS:
1/16 CROSS SECTION IMPERIAL (OK22N7 @ $ 41.60 CODE 2)
3/32 CROSS SECTION IMPERIAL (OK23N7 @ $ 41.60 CODE 2)
GENERAL IMPERIAL ASSORTMENT (OK21N7 @ $ 41.60 CODE 2)
GERMAN STANDARD METRIC (OK25N7 @ $ 41.60 CODE 2)
JAPANESE STANDARD JIS METRIC (OK24N7 @ $ 41.60 CODE 2)
ONLY $125.00 PER SET CODE 4
ORK-OK2SETN9 SET OF 5 O-RING GRAB KITS NITRILE 90 DURO
CONTAINS THE FOLLOWING KITS:
1/16 CROSS SECTION IMPERIAL (OK21N9 @ $ 54.30 CODE 2)
3/32 CROSS SECTION IMPERIAL (OK22N9 @ $ 54.30 CODE 2)
GENERAL IMPERIAL ASSORTMENT (OK23N9 @ $ 54.30 CODE 2)
GERMAN STANDARD METRIC (OK24N9 @ $ 54.30 CODE 2)
JAPANESE STANDARD JIS METRIC (OK25N9 @ $ 54.30 CODE 2)
ONLY $135.00 PER SET CODE 4
-
Ver 15.06.25 10
GENERIC O-RING KITS
ORK-IMP N7 $ 71.00 2
Contains
Total of 382 British Standard Imperial Nitrile 70 Duro O-Rings
BS006 to 012 (20 each)
BS110 to 116 (13 each)
BS210 to 222 (10 each)
BS325 to 327 (7 each)
ORK-IMP V7 $ 376.54 2
Contains
Total of 382 British Standard Imperial Viton 75 Duro O-Rings
Sizes as per ORK-IMP N7
ORK-IMP C7 $ 296.28 2
Contains
Total of 382 British Standard Imperial Neoprene 70 Duro O-Rings
Sizes as per ORK-IMP N7
ORK-IMP E7 $ 312.80 2
Contains
Total of 382 British Standard Imperial EPDM 80 Duro O-Rings
Sizes as per ORK-IMP N7
ORK-IMP S7 $ 504.33 2
Contains
Total of 382 British Standard Imperial Silicone 70 Duro O-Rings
Sizes as per ORK-IMP N7
ORK-BU $ 238.50 2
Contains
Total of 364 British Standard Imperial contoured Nitrile Backups
BS006 to 012 (10 each)
BS110 to 116 (14 each)
BS210 to 222 (14 each)
ORK-BUT $ 504.87 2
Contains
Total of 364 British Standard Imperial Solid PTFE Backups
Sizes as per ORK-BU
ORK-QUAD $ 238.50 2
Contains
Total of 382 British Standard Imperial Nitrile 70 Duro O-Rings
Sizes as per ORK-IMP N7
-
Ver 15.06.25 11
ORK-JIS $ 199.16 2
Contains
Total of 444 Japanese Industrial Standard Nitrile 70 Duro O-Rings
P003-N7 to P025-N7
G025-N7 to G060-N7
ORK-JIS N9 $ 212.21 2
Contains
Total of 444 Japanese Industrial Standard Nitrile 90 Duro O-Rings
P003-N7 to P025-N7
G025-N7 to G060-N7
ORK-MET N7 $ 71.00 2
Contains
Total of 428 Metric European standard Nitrile 70 Duro O-Rings
5 x 2 to 13 x 2 (6 sizes)
10 x 2.5 to 22 x 2.5 (9 sizes)
19 x 3 to 38 x 3 (13 sizes)
39 x 4 to 48 x 4 (4 sizes)
ORK-9A $ 190.80 2
Contains
Total of 410 Metric European standard Nitrile 70 Duro O-Rings
3 x 2 to 78 x 2 (60 sizes)
ORK-9B $ 190.80 2
Contains
Total of 228 Metric European standard Nitrile 70 Duro O-Rings
3 x 3 to 78 x 3 (60 sizes)
-
Ver 15.06.25 12
O-RING CORD SPLICING KITS ORK-IMP SPLICING $ 79.84 2
Contains
Extruded Nitrile 70 Duro O-Ring Cord
1 metre each of 1/16 nom., 3/32 nom., 1/8 nom., 3/16 nom., nom.
20g adhesive, knife, cutting guide
ORK-MET SPLICING $ 79.84 2
Contains
Extruded Nitrile 70 Duro O-Ring Cord
1 metre each of 1.5mm, 2mm, 2.5mm, 3mm, 3.5mm, 4mm, 5mm, 5.7mm, 7mm
20g adhesive, knife, cutting guide
A great investment for a mobile operation.
Each kit contains lengths of quality Nitrile (NBR) o-ring cord, a knife and a bottle of adhesive bond.
Measure the length of o-ring you require, put the cord into the cutting block to make a clean cut and then bond
the ends of the cord together.
In no time at all you will have a custom made o-ring to fix your job.
Not suitable for o-rings in dynamic applications.
-
Ver 15.06.25 13
TOOLS & LUBRICANTS We are also able to offer a range of picks and O-Ring measuring tools
CONE-9U5155 $ 109.84 4
Just check your section in the notches on the base and then drop the O-Ring over the cone until it rest neatly on
a step and read your size number. Covers 184 common Imperial British standard sizes
TOOL-ORING CHART A2 $ 15.75 0
Set of 3 A2 laminated sheets showing exact Imperial size O-Ring profiles.
KC-16390 $ 26.36 0
Set of 4 Chrome Vanadium tipped
picks
KC-10419 $ 38.36 0
Set of 4 picks, Phillip #0, 3mm
Blade, T15 & T20 Star drivers in
plastic case
TOOL-PICKSET-8PCE $ 54.54 0
Set of 8 heavy duty picks in a blow molded case
-
Ver 15.06.25 14
AB Seals are proud to offer Point-Of-Sale stands
featuring blister packs of the most common fitting O-
Rings and seals.
We supply the complete stand, with signs, hooks and 2
complete sets of blister packed parts as listed below. All
packs are available separately to restock, with an easy to
use reorder form.
Parts include
O-Rings to suit
BSP -02, -04, -06, -08, -12, -16, -20, -24, -32
SAE-J518C flanges -08, -12, -16, -20, -24, -32, -40
UNO -07, -09, -12, -14, -17, -21, -26, -30
ORFS -09, -11, -13, -16, -19, -23, -32 Flaretite Seals to suit
JIC-07, -09, -12, -14, -17, -21, -26, -30 Bonded Washers to suit
BSP -02, -04, -06, -08, -10, -12, -14, -16, -20, -24 Retaining Rings to suit
BSP -02, -04, -06, 08, -12, -16, -20, -24 D-Rings to suit
Cat flanges , 1, 1 , 1 , 1 , 2, 2 , 2
All packs are labeled with the pack part number, the
fitting type, dash number and fractional size, and qty
contained. Stand can also be supplied with customized
blister pack labels showing your address and a contact
phone number. Please specify on ordering if you wish to
take this option.
This entire unit is available for just $ 567.84 + GST (CODE 1) (Part number complete POS-FITTING STAND)
-
Ver 15.06.25 15
AB Seals is also sells individual blister packs from the stand for use at your sales counter.
The initial range includes seals and O-Rings for common hydraulic fittings as detailed below. All parts
are labeled with the pack part number, fitting type, dash number and fractional size, and quantity
contained.
The blisterpacks are suitable for use with our mesh stands or any standard mesh slat wall or loop
hooks.
The initial range consists of 66 products as detailed overleaf, which include
O-Rings for BSP, UNO, SAE, ORFS
Flaretite seals for JIC
Cat D-Rings
BSP Retaining rings
BSP Bonded washers
Plumbing O-Rings and washers
GrabnGo Handipaks are a great way to save time
and effort on counter sales - simply identify the
fitting size and type and direct the customer to the
correct Handipak conveniently located in you sales
area.
Blisterpacks come as standard as shown above but
can be supplied with customized labels showing
your logo and contact number. Total packs must
be ordered in multiples of 30 (ie30, 60, 90 of any
combination of packs) to allow for printing of
custom labels.
-
Ver 15.06.25 16
GRABnGO HANDIPAKS
ALL PACKS ARE PRICE CODE 2
PART NUMBER DESCRIPTION LIST PART NUMBER DESCRIPTION LIST
PACK-ORBSP02 1/8" BSP O-RING $2.50
PACK-FTJIC30 1 7/8" JIC FLARETITE $41.22
PACK-ORBSP04 1/4" BSP O-RING $5.01
PACK-BWBSP02 1/8" BSP DOWTY $5.62
PACK-ORBSP06 3/8" BSP O-RING $5.01
PACK-BWBSP04 1/4" BSP DOWTY $5.62
PACK-ORBSP08 1/2" BSP O-RING $6.25
PACK-BWBSP06 3/8" BSP DOWTY $6.25
PACK-ORBSP12 3/4" BSP O-RING $7.49
PACK-BWBSP08 1/2" BSP DOWTY $6.88
PACK-ORBSP16 1" BSP O-RING $7.49
PACK-BWBSP10 5/8" BSP DOWTY $8.75
PACK-ORBSP20 1 1/4" BSP O-RING $8.75
PACK-BWBSP12 3/4" BSP DOWTY $9.37
PACK-ORBSP24 1 1/2" BSP O-RING $9.99
PACK-BWBSP14 7/8" BSP DOWTY $6.88
PACK-ORBSP32 2" BSP O-RING $12.50
PACK-BWBSP16 1" BSP DOWTY $7.49
PACK-ORSAE08 1/2" FLANGE O-RING $5.01
PACK-BWBSP20 1 1/4" BSP DOWTY $11.24
PACK-ORSAE12 3/4" FLANGE O-RING $6.25
PACK-BWBSP24 1 1/2" BSP DOWTY $12.50
PACK-ORSAE16 1" FLANGE O-RING $7.49
PACK-RRBSP02 1/8" BSP RETAINER $7.49
PACK-ORSAE20 1 1/4" FLANGE O-RING $5.01
PACK-RRBSP04 1/4" BSP RETAINER $7.49
PACK-ORSAE24 1 1/2" FLANGE O-RING $6.25
PACK-RRBSP06 3/8" BSP RETAINER $7.49
PACK-ORSAE32 2" FLANGE O-RING $7.49
PACK-RRBSP08 1/2" BSP RETAINER $7.49
PACK-ORSAE40 2 1/2" FLANGE O-RING $8.75
PACK-RRBSP12 3/4" BSP RETAINER $9.37
PACK-ORUNO07 7/16" UNO O-RING $3.74
PACK-RRBSP16 1" BSP RETAINER $5.01
PACK-ORUNO09 9/16" UNO O-RING $5.01
PACK-RRBSP20 1 1/4" BSP RETAINER $6.25
PACK-ORUNO12 3/4" UNO O-RING $6.88
PACK-RRBSP24 1 1/2" BSP RETAINER $6.25
PACK-ORUNO14 7/8" UNO O-RING $7.49
PACK-CATD12 3/4 D-RING $11.24
PACK-ORUNO17 1 1/16" UNO O-RING $11.24
PACK-CATD16 1" D-RING $12.50
PACK-ORUNO21 1 5/16" UNO O-RING $7.49
PACK-CATD20 1 1/4 D-RING $6.25
PACK-ORUNO26 1 5/8" UNO O-RING $9.99
PACK-CATD24 1 1/2" D-RING $6.25
PACK-ORUNO30 1 7/8" UNO O-RING $11.87
PACK-CATD28 1 3/4" D-RING $7.49
PACK-ORFS09 9/16" ORFS O-RING $2.50
PACK-CATD32 2" D-RING $7.49
PACK-ORFS11 11/16" ORFS O-RING $2.50
PACK-CATD36 2 1/4 D-RING $8.75
PACK-ORFS13 13/16" ORFS O-RING $3.74
PACK-CATD40 2 1/2" D-RING $8.75
PACK-ORFS16 1" ORFS O-RING $3.74
PACK-OR08 #8 TAP SPINDLE O-RING $2.50
PACK-ORFS19 1 3/16" ORFS O-RING $5.01
PACK-OR08.5 #8.5 TAP SPLINDLE O-RING $2.50
PACK-ORFS23 1 7/16" ORFS O-RING $5.62
PACK-OR09 #9 GARDEN HODE O-RING $2.50
PACK-ORFS27 1 11/16" ORFS O-RING $6.25
PACK-OR10 #10 LAUNDRY ARM O-RING $2.50
PACK-ORFS32 2" ORFS O-RING $6.25
PACK-OR14 #14 PLUMBERS O-RING $2.50
PACK-FTJIC07 7/16" JIC FLARETITE $9.99
PACK-SPOUT ASST ASSORTED SPOUT O-RINGS $2.50
PACK-FTJIC09 9/16" JIC FLARETITE $9.99
PACK-TAP ASST ASSORTED TAP O-RINGS $2.50
PACK-FTJIC12 3/4" JIC FLARETITE $10.62
PACK-GARDEN TAP NUT NUT & TAIL WASHERS $2.50
PACK-FTJIC14 7/8" JIC FLARETITE $12.50 PACK-H'HOLD TAP
WASHER FIBRE BODY WASHER 1/2"TAP $3.12
PACK-FTJIC17 1 1/16" JIC FLARETITE $16.24 PACK-GARDEN TAP
WASHER FIBRE BODY WASHER 5/8"TAP $2.50
PACK-FTJIC21 1 5/16" JIC FLARETITE $18.73 PACK-13MM BODY
WASHER EZKLEEN BODY WASHER $3.12
PACK-FTJIC26 1 5/8" JIC FLARETITE $22.48
PACK-BODY WASHR ASST ASSORTED FIBRE WASHERS $5.01
-
Ver 15.06.25 17
We recommend the following high performance lubricants.
Molytec Silicone Lubricant is a hi-performance, translucent
paste, which is non-toxic, and has an operating range of -50 to
+200 C. Silicone Lubricant has very good water repellency, is
oxidation resistant and has good adherence to dry surfaces. It is
resistant to tracking and demonstrates very low volatility.
This is an ideal assembly and operating lubricant for all oil
resistant seals and O-Rings.
Available as
25g tube Moly-M897 $ 7.65 + gst
100g tube Moly-M813 $ 22.68 + gst
500g tub Moly-M814 $ 76.41 + gst
2kg tub Moly-M815 $ 289.86 + gst
All prices are Code 4
Magnalube-G Teflon Based Grease is one of the best operating
lubricants available in the marketplace.
It constantly deposits a Teflon film on the contact surface surfaces
which continually lubricates and protects against corrosion and wear.
Magnalube-G is water resistant and will not migrate from hot
surfaces. It is serviceable under load conditions to 7000 psi and is both
mechanically and chemically stable. Operating range is from -40to
+290 C.
4 cc Blister Tube $ 5.75 + gst
21 g Tube $ 11.82 + gst
100 g Jar $ 9.56 + gst
250 g Jar $ 23.02 + gst
450 g Cartridge $ 36.42 + gst
500 g Tin $ 41.42 + gst
1 kg Tin $ 75.34+ gst
4 kg Tin $ 273.02 + gst
All prices are Code 4