Read all of the instructions before using this appliance and keep the

Google Android Internet TV Box

Instruction Manual

instruction manual in a safe place for future reference.

Model No.: NGT-20

Contents

Important Safety InstructionsSafety and product notices 1Disposal of your old product and batteries 1

Product IntroductionFeature highlights 2Accessories 2

3weivrevOtcudorP4lortnocetomeR

Connection5noitcennoC5ylppusrewopehtottcennoC5skcajTUPNI5OUTPUT jacks

Getting Started7rewoptcennoC

Find the correct input on your TV7lortnocetomerehteraperP

Use the Setup menu77

Setup9unemPUTES

Play01yalP

Additional Information11snoitacificepS

Troubleshooting21tinuniaM21erutciP21dnuoS21yalP

12Working with secure certificates

Important Safety Instructions

Safety and product notices

Warning: Dangerous high voltages are present inside this enclosure. To avoid electric shock, do not open the cabinet, refer servicing to qualified personnel only.To ensure the proper operation, all the safety and operating instructions should be read carefully before connection and operation.

1. Read these instructions.2. Keep these instructions.3. Heed all warnings.4. Follow all instructions.5. Do not use this player near water and keep the appliance

away from rain and any moisture. Dry location use only.6. Clean only with dry cloth. Do not clean the unit with strong

chemical agents or abrasive cleaners. Never spill liquid of any kind on the product. Do not allow residue or liquids to enter any part of the appliance as this may cause risk of electrocution. Always disconnect from the mains before cleaning.

7. Do not block any ventilation openings and , install in ac-cordance with the manufacturer’s instructions.

8. Never place the product, remote control or batteries near naked flames or other heat sources such as radiators,

produce heat. Do not expose the device and the remote control to direct sunlight.

9. Protect the power cord from being walked on or pinchedparticularly near the convenience receptacles, and thepoint where they exit from the player.

10. -ufacturer.

11.

12.

13.

14.

15.

16.

17.

Do not place this appliance on an unstable cart, stand, tripod, bracket, or table. The appliance may fall, causing serious injury to the user and damage to the product. Do not place it on top of any other appliance.

18. Unplug this player during lightning storms or when it isunused for long periods of time.

19. -ing is required when the player has been damaged in anyway, such as power-supply cord or plug is damaged, liq-uid has been spilled or objects have fallen into the player,the player has been exposed to rain or moisture, does notoperate normally, or has been dropped.

20. Please keep the unit in an environment with good ventila-tion.

21. WARNING:do not expose this apparatus to rain or moisture. The ap-paratus shall not be exposed to dripping or splashing and

placed on apparatus.22. WARNING: Where the mains plug or an appliance cou-

pler is used as the disconnect device, the disconnect de-vice shall remain readily operable.

23.

24.

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER OR BACK.NO USER-SERVICEABLE PARTS INSIDE. REFER SERV-ICING TO QUALIFIED PERSONNEL.

1

The appliance is intended for household use only, and not for commercial, industrial or outdoor use.Risk of overheating! Never install the product in a confined space. Always leave a space of at least 10cm around the product for ventilation. Ensure curtains or other objects never cover the ventilation slots on the product.Always use the appliance with a power outlet of the same voltage (A.C. only) as marked on the appliance.No naked flame sources such as lighted candles should be placed on the apparatus.Do not operate the unit if it is not working normally or has been damaged in any way. Turn the unit off, unplug it from the power source and consult service personnel. Do not attempt to repair, disassemble or modify the appliance. There are no user-serviceable parts inside. Repairs should only be performed by qualified personnel.Do not immerse the unit, plug or cord in water or spray with liquids. Doing so may cause electric shock. Do not use the appliance with an extension cord unless this cord has been checked and tested by a qualified technician or service person. Do not let the power cord hang over the edge or a table or bench top or touch any hot surface.

the appliance, batteries or discs to extremetemperatures or excessive moisture rain, sand. In the event of a product malfunction, disconnect this appliance from the mains supply by removing the mains plug from the mains outlet. Always ensure the mains plug is accessible.

Do not attempt to dismantle the appliance. You may become exposed to invisible laser radiation if the product is open or the interlock is failed or defeated, avoid direct exposure to beam.

Disposal of your old product and batteries

Your product is designed and manufac-tured with high quality materials and com-ponents, which can be recycled and re-used.Please observe the local regulations regard-ing the disposal of packaging materials, exhausted batteries and old equipment.

Product Introduction

Feature highlights Accessories

Instruction Manual

Remote Control

Power adaptor

Batteries

2

Make sure all the accessories are included with the player. If any item is damaged or missing, contact your dealer.

123/abc

Multimedia(FHD)

Game (Local, Network)

Network Application Native, internet)

Touch Machine,Instead X86 platform

Support Wi-Fi,

Support 2.4G

Support DLNA

Support Flash 10.1

Support Desktop with weather,Calendar,Clock,Note;

Application Market

System and application upgrade by USB and network

microSD

Power LAN / RJ45

HDMIE-SATA

USB 2.0 (5V, 3A MAX)

13

24

MEMORY

COMPONENT VIDEO

AUDIO (STEREO)

ANDROID 2.2

Product Introduction

Main unit

Product Overview

Front Panel

Back panel

1

1 2 3 4 5

6

7 8

2

1. POWER button: Turn on this product or switch to standby mode.

2. IR sensor: Detect signals from the remote control. Point the remote control at the IR senser.

3

OUTPUT jacks:

6. YPbPr Jacks7. YPbPr audio R/L Jacks

3. HDMI Jack

1. Power inINPUT jacks:

4. eSATA jack

8. micro SD Jacks

2. LAN Jack

5.USB1/2/3/4 Jack

IR

Product Introduction

Remote control

123/abc

4

1 2 1. POWER: Turn on the product or switch to standby mode.

4. 123/abc: Exchange the enter mode from number and words for the buttons above.The screen will display “123” or ”abcABC” when you press the button, in”123” state you could only enter the numbers by the numbers above, andin ”abcABC” state you could enter all by pressing the button repeatedly.

Keyboard/Mouse: Exchange the enter mode from keyboard and mouse.Keyboard: you could select the items by the buttons.Mouse: you should use the buttons to move the mouse on the screen, and use ENTER button to confirm you selection.

Delete: Delete the previous word you entered.5. Home: Return to the home menu.6. Search: Display the search menu.7. ENTER: Buttons for menu operation.8. : Display the current operation menu.9. Return: Return to previous menu.10. VOL+/-: Volume+/-. PG+/-: Page+/-. Zoom in: Zoom in the web page. Zoom out: Zoom out the web page. Play/Pause11. Fast backward Fast forward Previous NEXT12. Colour buttons: Spare buttons, no function.

3

4

5

8

6

7

9

10

11

12

2. MUTE: Press to mute the sound or cancel the mute state.

Press the button repeatedly to enter the numbers,words and symbols.

ENTER

3. Buttons for entering numbers and words

microSD

Power LAN / RJ45

HDMIE-SATA

USB 2.0 (5V, 3A MAX)

13

24

MEMORY

COMPONENT VIDEO

AUDIO (STEREO)

ANDROID 2.2

microSD

Power LAN / RJ45

HDMIE-SATA

USB 2.0 (5V, 3A MAX)

13

24

MEMORY

COMPONENT VIDEO

AUDIO (STEREO)

ANDROID 2.2

microSD

Power LAN / RJ45

HDMIE-SATA

USB 2.0 (5V, 3A MAX)

13

24

MEMORY

COMPONENT VIDEO

AUDIO (STEREO)

ANDROID 2.2

microSD

Power LAN / RJ45

HDMIE-SATA

USB 2.0 (5V, 3A MAX)

13

24

MEMORY

COMPONENT VIDEO

AUDIO (STEREO)

ANDROID 2.2

Connection

Note

Basic connections:Input

LANeSATA

Connect to the power supply

INPUT jacks

OUTPUT jacks

Connection

Output

(AC100-240V

Connect to the LAN (network)

Connect to the HDMI jack

Connect to the eSATA

Connect to the USB device

Connect to the micro SD card

microSD

Power LAN / RJ45

HDMIE-SATA

USB 2.0 (5V, 3A MAX)

13

24

MEMORY

COMPONENT VIDEO

AUDIO (STEREO)

ANDROID 2.2

microSD

Power LAN / RJ45

HDMIE-SATA

USB 2.0 (5V, 3A MAX)

13

24

MEMORY

COMPONENT VIDEO

AUDIO (STEREO)

ANDROID 2.2

Note

micro

SD

microSD

Power LAN / RJ45

HDMIE-SATA

USB 2.0 (5V, 3A MAX)

13

24

MEMORY

COMPONENT VIDEO

AUDIO (STEREO)

ANDROID 2.2

Connection

6

Connect an HDMI cable (not supplied) to:

V.

Tip

o play digital video images via an HDMIit is necessary

content protection system).y.

L R

Y

Y

Connect to the YPbPr jacks

Note

y.

ip

labelled as Y V.

YV.

V.

device

Getting Started

Caution

Always follow the instructions in this chapter in sequence.

Prepare the remote control

CautionDue to a risk of explosion! Keep batteries away from heat,

1. Open the battery compartment.2. Insert 2xAAA batteries with correct polarity (+/-) as indi-

cated.3. Close the battery compartment cover.

NoteIf you are not going to use the remote control for a longtime, remove the batteries. Do not mix old and new batteries.Do not mix alkaline, standard (carbon-zinc), orrechargeable (ni-cad, ni-mh, etc) batteries. Batteries contain chemical substances, so theyshould be disposed of properly.

Find the correct input on your TV

1. Press to turn on this product.2. Turn on the TV and switch to the correct video input (refer

to the TV user manual on how to select the proper input).

Use the SETUP menu

7

Note

The type plate is located on the back of the product.

Caution

AC power cord, ensure you have completed all other connections.

Connect power

Connect the AC power cable to a suitable wall socket.This product is ready to be set up for use.

Risk of product damage! Ensure that the power supply voltage corresponds to the voltage printed on the back of the unit. When first time power up, You’ll see Welcome Page.

It will help you to config your device.

Select Language

Adjust the position of the screen

Select network and setup

Setup the time

Getting Started

Setup Time zone

Configuration View

Home screen

The submenus

Use the number buttons on the remote control to enter the number, and use the buttons to change the position,then select “Done” item and press “ENTER” button to saveand continue the next setting.

8

Use the buttons to select the “+” or “-”, and press “ENTER” button to set the time, then select “Done” item and press “ENTER” button to save and continue the next setting.

Press buttons to select the item and press “ENTER”button to enter the submenu.

MUSIC menu

PICTURE menu

VIDEO menu

APPS menu

INTERNET menu

SETUP menu

9

Press buttons to select the SETUP menu, then press buttons to select SETTINGS menu, press ENTER button to enter the SETTINGS menu.The Set-up application contains most of the customizing and configuring, such as language, aspect ratio, password,date&time, Wi-Fi. And you can upgrade the system here.

Connecting to Wi-Fi networksWi-Fi is a wireless networking technology that can provide Internet access at distances of up to 100 meters, depending on the Wi-Fi router and your surroundings.To use Wi-Fi on NGT-20, you access a wireless access point, or “hotspot”. Some access points are open and you can simply connect to them. Others are hidden or implement other security features, so you must configure the set so it can connect to them.There are numerous systems for securing Wi-Fi connections, including some that rely on secure certificates or other schemes to ensure that only authorized users can connect. For details, you can ask the network administrator.The Status bar displays icons that indicate Wi-Fi status.Connecting to Wi-Fi networksIf you’re adding a Wi-Fi network when first setting up, Wi-Fi is turned on automatically, so youcan skip to step 3.1 Press Home, press Set-up, and select Wi-Fi Setting.2 Check Wi-Fi to turn it on. Blue indicate the Wi-Fi is on, Gray is off.3 Choose a network to connect to it.If the network is open, you are prompted to confirm that you want to connect to that network by pressing ENTER for connection. if the network is secured, you’re prompted to enter a password or other credentials.(You can ask your network administrator for details.)To receive notifications when open networks are in rangeBy default, when Wi-Fi is on, you receive notifications in theStatus bar when the system detects an open Wi-Fi network.1 Turn on Wi-Fi, if it’s not already on.2 In the Wi-Fi settings screen, check Network notification.You can uncheck this option to stop notification.To add a Wi-Fi networkYou can add a Wi-Fi network so the system will remember it, along with any security credentials, and connect to it automatically when it is in range. You must also add a Wi-Finetwork to connect to it, if it does not broadcast its name(SSID), or to add a Wi-Fi network when you are out of range of it.To join a secured network, you need to contact the network’s administrator to learn what security scheme is deployed on it and to obtain the password or other required security credentials.1 Turn on Wi-Fi, if it’s not already on.2 In the Wi-Fi settings screen, select Add Wi-Fi network(the item will high-lighted), and press ENTER.

SETUP menu

Setup3 Enter the SSID of the network.4 Enter any required security credentials.5 Save.The system connects to the wireless network. Any credentials that you entered are saved, so you are connected automatically the next time you come within range of this network.To forget a Wi-Fi networkYou can make the system forget about the details of a Wi-Fi network that you added, for example, if you don’t want the system to connect to it automatically or if it’s a network that you no longer use.1 Turn on Wi-Fi, if it’s not already on.2 In the Wi-Fi setting screen, select the name of the network and press ENTER.3 Select Forget network and press ENTER.

Android Keyboard On screen keyboard settingsThe Android Keyboard setting apply to the onscreen keyboard that is included with the system.

1). Wi-Fi settingsWi-Fi Check to turn on Wi-Fi so you can connect to Wi-Fi networks.Network notification Check to receive an alert when an open Wi-Fi network becomes available.Add Wi-Fi network Opens a dialog where you can add a Wi-Fi network by entering its SSID (the name it broadcasts ) and security type. NOTE:For the pre-installed driver, please use the special USB wireless card.2). Ethernet configurationEthernet Opens the ethernet.Ethernet configuration1-Ethernet Devices Select the corresponding devices.2-DHCP/Static IPIf you check use Static IP, you can enter IP address/Netmask/DNS address/Default manually, rather than n DHCP protocol to obtain network setting from the network itself.(For details, please ask the administrator of the network.)

10

6). PrivacyYou should enter the menu to reset the settings according the hints when there’s some troubles with your machine.Note: All the datas will be losed except the datas in the devices. 7). Language & Keyboard

8). Date & TimeAutomatic “ ” means use network-provided values, and the system time will synchronize with the network.Set date & Set time: You can set manually.Select time zone: Select the local time zone.Use 24-hour format: 24-hour(default)Select date format: 2010/10/29 & 29/10/2010 & 20/29/20109). System upgradeWarning! If the system deteces file(*.img)in the root of USB, it will upgrade.During upgrading, no progress bar, and the system will restart itself.10. About device

Music menu

Information about the system can be viewed here.

Play

Play

Press buttons to select the MUSIC menu, then pressENTER button to enter the device list, select the device you want to play, and press ENTER button to display the musicfiles.

Video menu

APPS menu

Press buttons to select the VIDEO menu, then pressENTER button to enter the device list, select the device you want to play, and press ENTER button to display the videofiles.

Press buttons to select the APPS menu, then pressbuttons to select the menu you want, and press ENTER button to enter the submenu.

INTERNET menu

Press buttons to select the INTERNET menu, then press buttons to select the menu you want, and press ENTER button to enter the submenu.

Note: Before you enter the INTERNET menu, you should makesure the internet settings in SETUP menu are ready.

Picture menu

Press buttons to select the PICTURE menu, then pressENTER button to enter the device list, select the device you want to play, and press ENTER button to display the picturefiles.

3). Proxy SettingsIf you must visit the internet un-directly, A proxy service should be set here:the Hostname and the Port. For details, you can search from internet or ask somebody.4).DisplayThe player outputs video signals of the highest resolution for you TV(default) If the picture is not clear, natural or to your satisfaction, try another option that suits your TV.Resolution Setting Select the type of video signals output from the HDMI out jack.720p/1080i/1080pAdjust screen size After entering the screen, first press ENTER, then adjust screen size to fit display thought .5). ApplicationsYou could find and operate the applications in the menu. You should operate according the hints on the menu.

You can select the language which you want.You can you use the physical keyboard freely,but must turn on the “Android keyboard”in the “setting”menu if you want to use the“screen keyboard”.

Additional Information

Note

notice

Platform

Power Supply

Resolution

Video support

etc

Audio support

Connectivity

Graphic Format

Network function

Dimensions

Net Weight

WMV9,

Troubleshooting

WarningBefore requesting after service please check thispossible resolution.

Risk of electric shock. Never remove the casing of theproduct. To keep the warranty valid, never try to repairthe product yourself.

Main unit

No reaction to the remote controlMake sure the player is connected to a power outlet. Insert the batteries correctly.Point the remote control at the IR sensor located on thefront panel of this product. If the remote still does not function, try putting new batteriesinto the remote control.

Picture

No pictureSee TV manual for correct video input selection. Changethe video input until you see the screen.

No picture on HDMI connectionIf this player is connected to an unauthorized displaydevice with an HDMI cable, the audio/video signal may notbe displayed. Check if the HDMI cable is faulty. If faulty or damaged,replaced the HDMI cable. Check your display device if the appropriate input was selected.

playback.

Sound

No audio output from the TVEnsure that the audio cables are connected to the audioinput of the TV.Assign the audio input of the TV to the correspondingvideo input. See the TV user manual for details.

No audio output from the loudspeakers of the audio

Ensure that the audio cables are connected to the audioinput of the audio device. Turn the audio device to the corresponding audio inputsource for the player.

No sound on HDMI connectionYou may not hear any sound from the HDMI output if theconnected device is non-HDCP compliant or only DVI-compatible.

Play

UDF, ISO9660 or JOLIET format.

or .JPEG.

for Windows Media™ Audio.

‘No entry’ sign appears on the TVThe requested operation is not possible.

12

de

.wma or .WMA

Working with secure certificatesIf your organization’s VPN or Wi- Fi networks rely on secure certificates, you must obtain the certificates and store them in the system’s secure credential storage, before you can configure access to those VPN or Wi- Fi networks on the system. If your network administrator instructs you to download the certificates from a website, you’re prompted to set a password for the credential storage when you download the certificates.