goldengate for nonstop enscribe to sql - · pdf filegoldengate for nonstop enscribe to sql...
TRANSCRIPT
GoldenGate for NonStop Enscribe to SQL Server
Page 1
GoldenGate for NonStop Enscribe to SQL Server
Objective
Upon completion of this lesson, you will be able to keep two heterogeneous databases
synchronized, in this case NonStop audited Enscribe to Microsoft SQL Server.
During this lesson, you will learn how to:
Prepare your environment to configure the GoldenGate processes
Configure and execute the initial data load
Configure and start the change capture of database operations
Configure and start the change delivery of database operations
NonStop Audited to MS SQL Server configuration
The following diagram illustrates the configuration for replicating a NonStop audited
database to an MS SQL Server target.
NonStop <source>
TMF Audit
TrailAudserv
Extract
Source
databaseManager
Windows server <target>
MS SQL Server
<dsn>
Target
<schema>Replicat
Collector
Trails
Manager
Network
GoldenGate for NonStop Enscribe to SQL Server
Page 2
Overview of Tasks
Prepare the Environment
In order to execute this lesson, the GoldenGate application must be installed on both the
source and target systems. The installation includes a sample database and scripts to generate
initial data as well as subsequent update operations. The source and target tables are created
and loaded with initial data. The GoldenGate Manager processes are also started so that other
processes may be configured and started.
Initial Data Load
To initially load data between heterogeneous databases, use the GoldenGate application to
perform your initial data synchronization while the application remains active. This lesson
demonstrates using Extract to pull data from the source files and sending the data directly to
Replicat on the target system.
Configure Change Capture
For audited tables, the Extract process is configured to capture change data directly from the
TMF audit trails and store the changes in a data queue known as GoldenGate remote trails.
Configure Change Delivery
Once the tables have been initially loaded with data and the Extract process is capturing all
operations, the Replicat process is configured to deliver the captured operations to the target
database.
<target> server
Initial
Replicat
MS SQL Server
<dsn>
Target
<schema>
<source> NonStop
Initial
ExtractSource
database
Network
Prepare the Environment
Page 3
Exercise 1.
Prepare the Environment
Objective
The goals of this exercise are to:
Configure and start the Manager processes.
Prepare the source and target sample databases.
Prepare the source NSK environment
1. Configure a GLOBALS parameter file on the source
Execute the following commands on the <source> system.
A GLOBALS parameter can be used to uniquely identify each GoldenGate instance when
multiple environments exist on single NSK node. Use the two-character <prefix> that was
defined in the Lab Preparation.
Execute the following commands on the <source> system unless a <prefix> is not needed for
your installation.
TACL> VOLUME <install vol>.<install subvol>
TACL> TEDIT GLOBALS
ADD DEFINE =GGS_PREFIX, CLASS MAP, FILE $<prefix>
2. Configure the Manager process on the source system
Execute the following commands on the <source> system.
The Manager process is responsible for starting and monitoring all of the other GoldenGate
processes. You will always have one manager process per GoldenGate instance.
TACL> VOLUME <install vol>.<install subvol>
TACL> RUN GGSCI
GGSCI> TEDIT PARAMS MGRPARM
-- GoldenGate Manager Parameter file
TCPIPPROCESSNAME <tcpip process>
PORT <port>
GGSCI> START MANAGER, CPU 1, PRI 180
Verify the results:
Prepare the Environment
Page 4
GGSCI> INFO MANAGER
3. Create and load source files
Execute the following commands on the <source> system.
The installation includes scripts to create sample files and generate initial data. Note that your <prefix> may need to be substituted for the GG in subvolume GGSSOU used in this section.
Move the script to the source data volume.
TACL> VOLUME <install vol>.GGSSOU
TACL> FUP DUP <install subvol>.DEMOLDEO, GGSSOU.*
Run the scripts.
TACL> FUP /IN <install vol>.<install subvol>.DEMOFUPS/
TACL> RUN <install vol>.<install subvol>.DEMOLDEO
Within DEMOLDEO the following prompts and replies are issued:
To perform an initial load enter (I), to update
the database enter (U) or to exit the program enter (E).
?I
To perform an initial load enter (I), to update
the database enter (U) or to exit the program enter (E).
?E
Verify the results:
TACL> FUP COPY ECUSTMER
TACL> FUP COPY ECUSTORD
4. Generate source definitions
Execute the following commands on the <source> system.
The DEFGEN utility is an interactive program that generates a source definition file describing
the layouts of the files/tables that are to be replicated.
TACL> VOLUME <install vol>.<install subvol>
TACL> RUN DEFGEN
Within DEFGEN, the following prompts and replies are issued:
Enter definitions filename (or Exit): <install vol>.GGSDEF.ECUSTDEF
File/Table to create definition for (or Exit): <install vol>.GGSSOU.ECUSTMER
Definition retrieved.
File/Table to create definition for (or Exit): <install vol>.GGSSOU.ECUSTORD
Definition retrieved.
File/Table to create definition for (or Exit): EXIT
Prepare the Environment
Page 5
5. Move the source definitions to the target
After exiting, FTP the file <install-vol>.GGSDEF.ECUSTDEF in ASCII format to the target
<install location>/dirdef/source.def.
Prepare the SQL Server 2005 target system
Install Manager
1. Configure Manager process on the target
Execute the following commands on the <target> system.
Note! The port numbers must be unique if you are installing GoldenGate more than once on
the same server.
Shell> cd <install location>
Shell> ggsci
GGSCI> EDIT PARAMS MGR
In the parameter file, enter the following parameter, then save and close the file.
-- GoldenGate Manager Parameter file
PORT <port>
Start Manager.
GGSCI> START MANAGER
Verify the results:
GGSCI> INFO MANAGER
Steps to create the database
2. Create the database
From Start>Programs, run SQL Server Management Studio.
Enter the name of the local SQL Server instance, then click connect.
Note: These instructions assume SQL Server Authentication which requires the
more complex, double layer, of authentication. For only Windows Authentication,
you can leave out most of the login and password entries.
Prepare the Environment
Page 6
This displays the main SQL Server Management Studio dialog box. Right, right-click
Database and select the New Database option.
The New Database dialog box appears. In the Name box, type the <database> from
the Lab Preparation worksheet.
Prepare the Environment
Page 7
Click OK to add the database.
The main SQL Server Management Studio dialog box reappears.
3. Create SQL Server logins and users
Right-click Security and select the New > Login.
The New Login dialog box appears.
Prepare the Environment
Page 8
For Name, type the <login>.
Select Authentication,
If you selected SQL Server Authentication, type the <password> in the two
Password fields.
Under Defaults, select your <database> for Database, and leave Language set to the
default.
Do not click OK. Instead, from Select a page in the upper left-hand box, double click User Mapping.
Prepare the Environment
Page 9
In the upper Users mapped to this login area, activate the checkmark next to your
database.
In the lower Database role membership for <database> area,, check the box for the
db_owner role.
Click OK to exit.
The next step creates a schema that you will associate with the new user.
While you have the database selected, click on the New Query button in the main
menu.
The right side of the dialog displays the SQL Query interface. Type in:
create schema <owner/schema>;
And press the Execute button from the toolbar.
Prepare the Environment
Page 10
Now you need to associate the new user and the schema that you have created with the new
database.
Right click on the Security option that is under the database and select New > User.
The New Database User dialog box appears. Enter the name of your user and press the browse button labeled with three dots (…).
Prepare the Environment
Page 11
The Select Login dialog displays. Press the Browse button.
Select your new user <login> from the list. Then press OK.
Your selected user now displays in the object names box. Press OK to exit from
Select Login.
Back in the New Database User dialog, enter the <schema> you added as the default
schema and press OK.
4. Create the ODBC system data source name
The GoldenGate Extract process connects to a SQL Server database through an ODBC (Open
Database Connectivity) connection. Both the Extract and Replicat components of GoldenGate
require that a system data source name (DSN) be established, which stores the information
about how to connect to the SQL Server.
Click Start > Settings > Control Panel.
Double-click Administrative Tools.
Double-click Data Sources (ODBC) to open the ODBC Data Source Administrator
dialog box.
Click the System DSN tab, and then click the Add button. The Create New Data
Source dialog box appears.
Note: For SQL Server 2000, you may use any ODBC driver supported by the
database. For SQL Server 2005, however, you must use the ODBC driver that is
included with Microsoft Data Access Components (MDAC). Both Extract and
Replicat will abend if the SQL Native Client ODBC driver that is provided with SQL
Server 2005 is used.
Prepare the Environment
Page 12
Select the SQL Server driver and then click Finish. The Create a New Data Source
to SQL Server dialog box appears.
For Name, type <dsn>.
For a description, type "GG Training Data source" when creating this source DSN.
This field is optional.
For Which SQL Server do you want to connect to, select the server name.
Click Next.
Answer the question about how SQL Server should verify the login by selecting the
option that you entered when creating the <login>. Then type <login> in Login ID
and <password> in Password.
Prepare the Environment
Page 13
Click Next.
Make certain the default database is set to the database that you created; otherwise
select Change the default database to: and select it. Leave the other settings to their
defaults to use ANSI.
Click Next.
Leave the next dialog box set to the defaults, and click Finish.
In the confirmation, click Test Data Source to test the connection.
Close the confirmation dialog box and the Create a New Data Source box.
Prepare the Environment
Page 14
5. Create the practice tables
Execute the following commands on the <target> system.
Go to SQL Server Management Studio, select your database and select New Query
from the toolbar.
If the correct database is not displayed in the drop down box (showing ggsdata
above), click on the arrow and select it from the list.
Click the File > Open and navigate to the demo_mss_create.sql script.
Click Open to open the script in the New Query window.
Execute the script by clicking the Execute Query button on the toolbar.
Verify the results using the following commands in the input window:
sp_help tcustmer
go
sp_help tcustord
go
Initial Data Load
Page 15
Exercise 2.
Initial Data Load using Direct Load Method
Objective
The goals of this exercise are to:
Configure and execute the initial data load capture
Configure and execute the initial data delivery
Configure initial load
1. Add the initial load capture batch task group
Execute the following commands on the <source> system to add an Extract group named
EINI <unique id>1.
GGSCI> ADD EXTRACT EINI<unique id>, SOURCEISTABLE
Verify the results:
GGSCI> INFO EXTRACT *, TASKS
2. Configure the initial load capture parameter file
Execute the following commands on the <source> system.
GGSCI> EDIT PARAMS EINI<unique id>
--
-- GoldenGate Initial Data Capture
-- for ECUSTMER and ECUSTORD
--
EXTRACT EINI<unique id>
RMTHOST <target>, MGRPORT <port>
RMTTASK REPLICAT, GROUP RINI<unique id>
TABLE <install vol>.GGSSOU.ECUSTMER;
TABLE <install vol>.GGSSOU.ECUSTORD;
1 The process names used in lab exercises, for example EINIBD, are made up of 1) one character for the
GoldenGate process (E for Extract, R for Replicat); 2) three or four to describe the process type (INI for
initial data load, ORA for capture from or delivery to an Oracle database, etc.) and 3) two characters to
create a unique identifier (usually your initials).
Initial Data Load
Page 16
3. Add the initial load delivery batch task group
Execute the following commands on the <target> system.
GGSCI> ADD REPLICAT RINI<unique id>, SPECIALRUN
Verify the results:
GGSCI> INFO REPLICAT *, TASKS
4. Configure the initial load delivery parameter file
Execute the following commands on the <target> system.
GGSCI> EDIT PARAMS RINI<unique id>
--
-- Change Delivery parameter file for
-- TCUSTMER and TCUSTORD changes
--
REPLICAT RINI<unique id>
TARGETDB <dsn>, USERID <login>, PASSWORD <password>
SOURCEDEFS ./dirdef/source.def
DISCARDFILE ./dirrpt/RINI<unique id>.dsc, PURGE
MAP <install vol>.GGSSOU.ECUSTMER,
TARGET <owner/schema>.TCUSTMER; MAP <install vol>.GGSSOU.ECUSTORD,
TARGET <owner/schema>.TCUSTORD;
5. Execute the initial load process
Execute the following commands on the <source> system.
GGSCI> START EXTRACT EINI<unique id>
Verify results using GGSCI:
GGSCI> VIEW REPORT EINI<unique id>
And using the SQL Query Analyzer on the <target>.
Query Analyzer> SELECT * FROM <owner/schema>.TCUSTMER
Query Analyzer> SELECT * FROM <owner/schema>.TCUSTORD
Configure Change Capture
Page 17
Exercise 3.
Configure Change Capture
Objective
The goals of this exercise are to:
Configure and add the Extract process that will capture changes.
Add the trail that will store the changes.
Start the capture process.
Configure change capture
1. Create the Extract parameter file
Execute the following commands on the <source> system to define an Extract named
EENS<unique id> to pull data from the Enscribe TMF audit trails and route these changes to
GoldenGate trails.
GGSCI> EDIT PARAMS EENS<unique id>
--
-- Change Capture parameter file to capture
-- ECUSTMER and ECUSTORD Changes
--
EXTRACT EENS<unique id>
TCPIPPROCESSNAME <tcpip process>
FETCHCOMPS
RMTHOST <target>, MGRPORT <port>
RMTTRAIL ./dirdat/<trail id>
TABLE <install vol>.GGSSOU.ECUSTMER;
TABLE <install vol>.GGSSOU.ECUSTORD;
Note: Record the two characters selected for your <trail id>: ______. You will need this
defining the remote trail and for identifying the trail to be read by Replicat.
2. Add the Extract group
Execute the following commands on the <source> system.
GGSCI> ADD EXTRACT EENS<unique id>, BEGIN NOW, CPU 1, PRI 160
Verify results:
GGSCI> INFO EXTRACT EENS<unique id>
Configure Change Capture
Page 18
3. Define the GoldenGate remote trail
Execute the following commands on the <source> system to add the trail declared in the
EENS<unique id>Extract parameters. This will be located on the target system.
GGSCI> ADD RMTTRAIL ./dirdat/<trail id>, EXTRACT EENS<unique id>,
MEGABYTES 5
4. Start the capture process
Execute the following commands on the <source> system.
GGSCI> START EXTRACT EENS<unique id>
Verify the results:
GGSCI> INFO EXTRACT EENS<unique id>
GGSCI> VIEW REPORT EXTRACT EENS<unique id>
Discussion points
1. Identifying a remote system
What parameters are used to identify the remote target system?
___________________________________________________________________
___________________________________________________________________
2. Using the FETCHCOMPS parameter
What action is triggered by the FETCHCOMPS parameter? What type of input record is
affected?
___________________________________________________________________
___________________________________________________________________
Hint: Search in the NSK Reference Guide for FETCHCOMPS | FETCHLASTIMAGE
Configure Change Delivery
Page 19
Exercise 4.
Configure Change Delivery
Objective
The goals of this exercise are to:
Set up the checkpoint table on the target system.
Create a named group that includes the Replicat process and the checkpoint tables.
Configure the Replicat group by adding parameters.
Start the Replicat group.
Set up checkpoints
1. Edit a GLOBALS file on the target system
Execute the following commands on the <target> system.
Edit the GLOBALS parameter file to add the checkpoint table.
Shell> cd <install location>
Shell> ggsci
GGSCI> EDIT PARAMS ./GLOBALS
In the text editor, type:
CHECKPOINTTABLE <owner/schema>.ggschkpt
Record the checkpoint table owner and name, then save and close the file.
Table owner ____________________ name ___________________
Note: You could name the table anything you want, but for training purposes we are using ggschkpt.
2. Activate the GLOBALS parameters
For the GLOBALS configuration to take effect, you must exit the session in which the changes
were made. Execute the following command to exit GGSCI.
GGSCI> EXIT
Configure Change Delivery
Page 20
3. Add a Replicat checkpoint table
Execute the following commands on the <target> system.
This step adds the checkpoint table that you specified when you created the GLOBALS
parameter file. It will be created in the <dsn> database.
Run GGSCI on the target.
Shell> cd <install location>
Shell> ggsci
Execute the following commands in GGSCI.
GGSCI> DBLOGIN SOURCEDB <dsn>, USERID <login>, PASSWORD
<password>
GGSCI> ADD CHECKPOINTTABLE
Configure delivery
4. Add the Replicat checkpoint group
Execute the following commands on the <target> system to create the Replicat group named
RMSS<unique id>.
GGSCI> ADD REPLICAT RMSS<unique id>, EXTTRAIL ./dirdat/<trail id>
Note: Refer to your Extract set up for the correct two-character <trail id>.
5. Create Replicat parameter file
Execute the following command on the <target> system to edit the Replicat
parameter file.
GGSCI> EDIT PARAM RMSS<unique id>
Add the following lines to the parameter file.
REPLICAT RMSS<unique id>
TARGETDB <dsn>, USERID <login>, PASSWORD <password>
HANDLECOLLISIONS
SOURCEDEFS ./dirdef/source.def
DISCARDFILE ./dirrpt/RMSS<unique id>.DSC, PURGE
MAP <install vol>.GGSSOU.ECUSTMER,
TARGET <owner/schema>.TCUSTMER; MAP <install vol>.GGSSOU.ECUSTORD,
TARGET <owner/schema>.TCUSTORD;
Configure Change Delivery
Page 21
6. Start the Replicat process
Execute the following commands on the <target> system.
Execute the following command in GGSCI to start the Replicat process.
GGSCI> START REPLICAT RMSS<unique id>
Verify the results:
GGSCI> INFO REPLICAT RMSS<unique id>
Discussion points
Search in the Windows//UNIX Reference Guide for the information on the following
questions.
1. When to use HANDLECOLLISIONS
When would you use HANDLECOLLISIONS? What does it do?
_________________________________________________________________________
_________________________________________________________________________
2. What information is supplied by SOURCEDEFS?
_________________________________________________________________________
_________________________________________________________________________
3. What is the purpose of the DISCARDFILE?
_________________________________________________________________________
_________________________________________________________________________
Generate Activity and Verify Results
Page 22
Exercise 5.
Generate Activity and Verify Results
Objective
The goals of this exercise are to:
Execute miscellaneous update, insert, and delete operations on the source system.
Verify the delivery of the changes to the target.
Generate database operations
1. Execute miscellaneous update, insert, and delete operations
Execute the following commands on the <source> system.
TACL> VOLUME <install vol>.GGSSOU
TACL> RUN <install vol>.<install subvol>.DEMOLDEO
Within DEMOLDEO the following prompts and replies are issued:
To perform an initial load enter (I), to update
the database enter (U) or to exit the program enter (E).
?U
To perform an initial load enter (I), to update
the database enter (U) or to exit the program enter (E).
?E
Verify change capture and delivery
2. Verify the results on your source system
Execute the following commands on the <source> system to view the contents of the source
Enscribe files.
TACL> FUP COPY <install vol>.GGSSOU.ECUSTMER
TACL> FUP COPY <install vol>.GGSSOU.ECUSTORD
Generate Activity and Verify Results
Page 23
Verify your target SQL Server 2005 results
3. Verify your results on the SQL Server 2005 target
Verify and record processing statistics on the <target> with the following command
in GGSCI.
GGSCI> SEND REPLICAT RMSS<unique id>, REPORT
GGSCI> VIEW REPORT RMSS<unique id>
Verify the data by executing the following commands in the New Query window of
SQL Server Management Studio on the source:
select * from TCUSTMER;
select * from TCUSTORD;
Turn off error handling
4. Turn off initial load error handling for the running delivery process
Execute the following commands on the <target> system.
GGSCI> SEND REPLICAT RMSS<unique id>, NOHANDLECOLLISIONS
5. Remove initial load error handling from the parameter file
GGSCI> EDIT PARAMS RMSS<unique id>
Remove the HANDLECOLLISIONS parameter.