gn-shale shaker flyer template - parkprocess.com
TRANSCRIPT
®
[email protected] www.ParkProcess.com
FLY-DWC-VSS
Features• Shaker deck angle adjustable while working.
• Patented rubber wedge sealing for shale shaker deck and screen for long life and easy replacement.
• Vibratory Screening unit’s bottom deck is made from Stainless Steel for long service life.
• Heat treatment on complete shale shaker deck for High G force operation. • Pre-tensioned shale shaker screen design for fast screen replacement.
• Top Brand Vibration Motors: IEC Ex, ATEX and UL Certified.
• Electrical components: SIEMENS, Schneider Brand.
• Introduction of flow to unit is by Weir Feed, Top Feed, or Hopper Feed for different applications.
Shale ShakerShale Shaker for Drilling Fluids Solids Control:
These vibratory screening devices remove drill cuttings from the drilling fluid while circulating and drilling. There are many different designs of the Shale Shaker and much research has gone into these designs to facilitate lowering costs associated with drilling fluid and drilling operations. The basic design consists of large, flat sheets of wire mesh screens or sieves of various mesh sizes that shake or vibrate the drill cuttings across and off of the screens as the drilling fluid flows through them and back into the drilling fluid processing system, often called the mud system. This separates the drill cuttings, often called solids from the drilling fluid so that it can be recirculated back down the well bore. In oilfield industry, linear motion type shale shakers are the standards for use in drilling mud solids control systems in oil and gas well drilling.
[email protected] www.ParkProcess.com
Dewatering Containers-Self Dumping Hoppers-Front Loaders-Roll-O�s-Permanently Mounted Tipping Stand-Trailer Mounted-Rotator Boxes-Crane Dumping-Filter Media
Filtration Equipment-Cartridge Filter Vessels-Cartridge Filters-Bag Filter Vessels-Bag Filters-Filter Presses (Standard/Oil�eld)-Filter Press Cloths-Sand Filters-Back Wash Filters-Carbon Filters-Filter Media (Permanent /Disposable)
Separation Equipment-Oil/Water Separators-Hydrocyclones-Vibratory Screening Units-Inclined Plate Clari�er-Grit Classi�ers-Strainers-Oil Skimmers-Mud Cleaners-Centrifuges
Mixing/Blending-Static Mixers-Eductors-Batch Mixing Systems-Tank Mixers-Agitators-Blend Plants-Blending Units-Mud Shearing
Chemical Treatment-Polymer Mixing & Injection-Static Mixers-PH Control Systems-Slurry Tanks
Pumping-Centrifugal Pumps-Progressive Cavity Pumps-Diaphragm Pumps-Trash Pumps
Conveyance-Screw Conveyors-Drag Conveyors
®
Technical Parameters Model ScreenCat-
LMOF-AScreenCat-
LMOF-BScreenCat-
LMOF-CScreenCat-
LMOF-DScreenCat-
LMOF-EVibration ModeCapacityVibration MotorScreen QtyScreen Size: L x WScreen AreaAdjustable G ForceVibrationAmplitudeDeck Angle RangeFeeding TypeWeir HeightExplosion ProofStandardWeight-lbs.Dimension:L x W x H
Linear Motion200 GPM2x1 HP2 pcs
29.5” x 35.5”14.53 sq. ft.
≤ 7.1G
5/32”-7/32”
+2ºBox Feeder
28”
IEC EX/ATEX
1,968
5’6” x 5’7” x 3’6”
528 GPM2x2.3 HP
3 pcs27.5” x 49.25”
28.3 sqft≤ 7.5G
5/32”-15/64”
-1º ~ +5º (Adjustable)Weir Feeder
35.25”
3,692
7’4” x 6’7” x 4’9”
Box Feeder41”
3,840
8’ x 6’9” x 4’10”
Weir Feeder35.25”
3,800
9’8” x 6’7” x 4’9”
616 GPM2x26 HP
4 pcs23” x 46”29.4 sqft
≤ 8.0G
11/64”-1/4”
Hopper Feeder
3,611
9’8” x 6’7” x 4’9”
FLY-DWC-VSS
Park 2014c
115.63 101.65
56.22
81.02 67.72
REV.
DATE
DWG. NO.
APP-OG-VS-0107/17/15
VIBRATORY SCREENINGDRAWING IS INTENDED FOR GENERAL ARRANGEMENT/PLACEMENT
PM DRN CHKAURC .
NOTES:
1. ALL DIMENSIONS ARE IN INCHES UNLESS NOTED OTHERWISE.
THIS SHEET IS THE PROPERTY OF PARK PROCESS, HOUSTON, TEXAS, AND MAYCONTAIN PROPRIETARY INFORMATION. IT IS CIRCULATED UNDER THE EXPRESSCONDITION THAT IT IS NOT TO BE USED IN ANY MANNER DIRECTLY OR INDIRECTLYDETRIMENTAL TO PARK PROCESS.
WEIGHTS, DIMENSIONS AND DESIGN ARE SUBJECT TO CHANGE. CONTACT PARKPROCESS FOR THE MOST UP TO DATE EQUIPMENT DRAWINGS AND INFORMATION.