global pipe brochure-03-02-2014 pipe brochure v6.pdf · and flexible pipe production. jco+e or +c /...
TRANSCRIPT
COMPETITIVE EDGE: Technical management by EEW Group, with 75 years of experience in LSAW pipe production.
First manufacturer of heavy wall LSAW Pipe up to 50.8 mm in the Middle East.
State-of-the-art Manufacturing equipment and process for efficient and flexible pipe production.
JCO+E or +C / Roll Bending Process, 3 inside welding lines, 4 outside welding lines for DSAW welding with up to 4 wires.
Mechanical Expander
GLOBAL PIPE COMPANY (GPC)
STRUCTURAL TUBULAR(Roll Bending Process)
LINE PIPE / STRUCTURAL TUBULAR(JCO Process)
MANUFACTURING FACILITIES57,000 m2 covered area, 120,000 m2 land area
Specification: API 5L Gr. B - X100Size: 16” – 62” (406.4 – 1574.8 mm)Thickness: up to 2” (50.8 mm)Length: Max 13.2 mCapacity: 170,000 MT/ YearApplication: Onshore / Offshore Oil and Gas Transmission Lines Sour Service (in house HIC / SSC test facilities)Additional services: induction bends, pipe coating, heat treatment
Specification: API 2B, Material to API, ASTM, ENSize: 46” – 200” (1168.40 – 5080 mm)Thickness: up to 6.61” (168 mm)Length: Max 36 m assembled lengthCapacity: 30,000 MT/ YearApplication: Leg Cans, Bracings for Offshore Structures Conductor Pipes Piling Pipes Civil construction
Additional services: Pre-fabrication services
A Saudi-German joint venture established betweenErndtebrücker Eisenwerk GmbH (EEW), Saudi Steel Pipe(SSP), Mr. Ahmed Al-Khonaini and Pan Gulf Holding (PGH).
0.35 0.39 0.43 0.47 0.51 0.55 0.59 0.63 0.67 0.71 0.75 0.79 0.83 0.87 0.91 0.94 0.98 1.02 1.06 1.10 1.14 1.18 1.22 1.26 1.30 1.34 1.38 1.42 1.46 1.50 1.54 1.57 1.61 1.65 1.69 1.73 1.77 1.81 1.85 1.89 1.93 1.97 2.01 2.05
9.0 10.0 11.0 12.0 13.0 14.0 15.0 16.0 17.0 18.0 19.0 20.0 21.0 22.0 23.0 24.0 25.0 26.0 27.0 28.0 29.0 30.0 31.0 32.0 33.0 34.0 35.0 36.0 37.0 38.0 39.0 40.0 41.0 42.0 43.0 44.0 45.0 46.0 47.0 48.0 49.0 50.0 51.0 52.0
16.00018.00020.00022.00024.00026.00028.00030.00032.00034.00036.00038.00040.00042.00044.00046.00048.00050.00052.00054.00056.00058.00060.00062.000
(Inch)406.40457.20508.00558.80609.60660.40711.20762.00812.80863.60914.40965.201016.001166.801117.601168.401219.201270.001320.801371.601422.401473.201524.001574.80(mm)
JCO(E/C )Post B ending API 5L; API 2B (Max. Length=13.2 mtrs) Max. Yie ld Point-720 N/S q.mm
JCO(E/C )Post B ending API 5L; API 2B (Max. Length=13.2 mtrs) Max. Yie ld Point-500 N/S q.mm
JCO(E/C )Pre B ending API 5L; API 2B (Max. Length=13.2 mtrs) Max. Yie ld Point-720 N/S q.mm (by special agreement)
GLOBAL PIPE COMPANY, SAUDI ARABIAPIPE SIZES AND RANGE:Pipe Manufactururing type JCO Process (E/C - Expander/Calibration)
1.5 1.6 1.7 1.8 2.0 2.2 2.3 2.5 2.6 2.8 2.9 3.0 3.2 3.3 3.5 3.6 3.7 3.8 3.9 4.1 4.2 4.3 4.4 4.5 4.6 4.8 4.9 5.0 5.1 5.2 5.4 5.5 5.6 5.7 5.8 5.9 6.1 6.2 6.3 6.4 6.5 6.6
37.0 40.0 43.0 46.0 52.0 55.0 58.0 64.0 67.0 70.0 73.0 76.0 82.0 85.0 88.0 91.0 94.0 97.0 100.0 103.0 106.0 109.0 112.0 115.0 118.0 121.0 124.0 127.0 130.0 133.0 136.0 139.0 142.0 145.0 148.0 151.0 154.0 157.0 160.0 163.0 166.0 168.0
46.00056.00065.00074.00083.00092.000100.000109.000118.000127.000136.000145.000154.000162.000171.000180.000189.000
(Inch)1168.401422.401651.001879.602108.202336.802540.002768.602997.203225.803454.403683.003911.604114.804343.404572.004800.60(mm)
Max. Yield 420 N/Sq.mmMax. Yield 260 N/Sq.mm
PIPE SIZES AND RANGE:Pipe Manufactururing type 4-RollBending Process (Max. 4.2 Mtrs Length)
Note: Pipe length more than 4.2Mtrs can be supplied with Circumfrential welds in length up to 36 Meters
OU
TSID
E D
IAM
ETER
OU
TSID
E D
IAM
ETER
Global Pipe company works with an IntegratedManagement System that covers all areas ofQuality, Health, Safety and Environment.
Approved byAmericanPetroleumInstitute
We are certified to:ISO 9001
ISO 14001
OHSAS 18001
API Q1
Global Pipe has full in-house facilitiesfor NDT, destructive and corrosion testing.Our test house and laboratory is equippedwith the latest technology for:
Chemical analysis
UT / RT / MPI / hydrostatic testing up to 350 bar
Impact / tensile test, Drop Weight Tear Test up to 100 KJ
HIC / FPBTWe are member of:American Welding Society®
The American Society forNondistructive Testing Inc.
5L - 09552B - 0142
API 5L
API 2B
ISO / TS 29001
EEW SPC Rostock
EEW PickhanSiegen
EEW CTS Düsseldorf
EEW CTS B.V.
EEW CMS Bejing
EEW GS Dubai
EEW APSSingapore
EEW Korea
EEW Malaysia Shd. Bhd
EEW do BrasilRio de Janeiro
EEW de Mexico
EEW ST Houston USA
EEW DY JapanTokyo
Trading/Administration
Production
EEW ErndtebrückHeadquarters
EEW SPC RostockEEW Korea
EEW Malaysia
GLOBAL PIPE COMPANY, SAUDI ARABIA
EEW Erndtebrück
EEW APSPerth
EEW APSKuala Lumpur
EEW Global Pipe Saudi Arabia(starting 2013)
GLOBAL PIPE COMPANYPART OF A GLOBAL ORGANIZATION
www.eew-group.com
P. O. Box No: 10463Jubail Industrial City 31961Kingdom of Saudi ArabiaTel : +966 13 342 2222Fax : +966 13-341-1641 Email : [email protected] www.globalpipe.com.sa