global neft

Global Neft Pte. Ltd.

80 Raffles Place, #43-03 UOB Plaza, Singapore 048624

UEN: 201835453D

Singapore l Indonesia l Moscow l UAE l London l Romania l Serbia l Hungary l Switzerland

0.001%, 10ppm Diesel (EN590)

LIMITS

TEST METHOD Grade Designation: UNIT I (a) II (a) III (a) Cetane Number - ≥ 51 EN ISO 5165; 15195

Cetane Index - ≥ 46 EN ISO 4264

Density @ 15°C Kg/m3 820 - 845 EN ISO 3675; 12185

Polycyclic Aromatic Hydrocarbons % (m/m) ≤ 8 IP 391; EN 12916

Sulphur Content mg/kg ≤ 10 EN ISO 20846; 20884

Flash Point °C > 55 EN ISO 2719

Carbon Residue (10% V/V Distillation Residue) % (m/m) ≤ 0.30 EN ISO 10370

Ash Content % (m/m) ≤ 0.01 EN ISO 6245

Water Content mg/kg ≤ 200 EN ISO 12937

Total Contamination mg/kg ≤ 24 EN 12662

Copper Strip Corrosion (3h@50°C) Rating Class 1 EN ISO 2160

Oxidation Stability g/m3 ≤ 25 EN ISO 12205

Lubricity, corrected wear scar dia. (wsd 1.4) 60°C μm ≤ 460 ISO 12156-1

Viscosity at 40°C mm2/s 2.00 - 4.50 EN ISO 3104 Distillation: % (V/V) recovered 250°C % (V/V) ≤ 65 EN ISO 3405

Distillation: % (V/V) recovered 350°C % (V/V) ≥ 85 EN ISO 3405

Distillation: 95% (V/V) recovered °C ≤ 360 EN ISO 3405

Filterability (CFPP) °C ≤ 0 ≤ -10 ≤ -20 EN 116

Cloud Point °C To be reported EN 23015

Fatty Acid Methyl Ester (FAME) content % (V/V) 0.2 Max. EN 14078

Appearance - Clear, bright, free from solid particles & segregated water Visual Inspection

Color - ≤ 2 ISO 2049 NOTES (a) Limits are set for 3 different periods : Period I : Summer season 15.04 – 14.10 Period II : Summer season 01.03 – 14.04; Autumn season 15:10 – 14.11 Period III : Winter season 01.01 – 28.02 and 15.11 – 31.12 In case of dispute or different interpretation of results, EN 590 shall be used.



UEN: 201835453D


0.02%, 200ppm Diesel

Grade Designation: UNIT RESULT (MIN.) RESULT (MAX.) Acidity mg/100cm3 - 5

Ash % wt - 0.01

Cetane Index - 45 -

Color - - 2.0

Iodine Number g/100g - 6

Copper Strip Test - - abs

Density @ 20°C Kg/m3 - 860

Distillation: 50% Recovered °C - 280


Flash Point °C 62 -

Bacteria CFU Fibre/lt - 1000

Total Sulphur % wt - 0.02

Mercaptan Sulphur % - 0.01

Cokability of 10% residue % wt - 0.02

Pour Point °C (*) -10.0

Cloud Point °C (*) -5.0

Kinematic Viscosity @ 20°C Cst 3.0 6.0 NOTES Summer from March to October (PP -5.0°C) (CP 0°C) Winter from November to February (PP -10.0°C) (CP -5.0°C)



UEN: 201835453D


0.05%, 500ppm Diesel

Grade Designation: UNIT RESULT (MIN.) RESULT (MAX.) Total Acid Number mg KOH/g - 0.25

Ash, mass % % wt - 0.01

Cetane Index - 52 -

Color - - 2.0

Lubricity, @60°C, WSD microns - 460

Copper Strip Test, Corrosion 3h at 100°C - 1

Density @ 15°C kg/litre 0.82 0.845


Distillation: Recovered @ 250°C Vol .% - 65

Distillation: Recovered @ 350°C Vol .% 85 -

Flash Point °C 65 -

Oxidation Stability (Accelerated Method) g/m3 - 10

Total Sulphur mg/kg - 500

Carbon Residue, Ramsbottom 10% Distillation Mass % - 0.2

Water Content, mass mg/kg - 200

Total Contamination mg/kg - 24.0

Cold Filter Plugging Point °C - 0.0



UEN: 201835453D


3.5%, CST380 Fuel Oil

Grade Designation: UNIT RESULT Test Method ASTM Density at 15°C kg/m3 991 (Max) ISO 3675 / ISO 12185

Kinematic Viscosity @ 50°C mm2/s 380 (Max) ISO 3104

Flash Point °C 60 (Min) ISO 2719

Pour Point (upper) 2 °C - ISO 3016

Winter Quality - 30 (Max) ISO 3016

Summer Quality - 30 (Max) ISO 3016

Carbon Residue % (m/m) 18 (Max) ISO 10370

Ash % (m/m) 0.15 (Max) ISO 6245

Water % (V IV) 0.50 (Max) ISO 3733

Sulphur % (m/m) 3.5 (Max) ISO 8754

Vanadium mg/kg 300 (Max) IP 501 / IP 470 / ISO 14579

Aluminum - 80 (Max) IP 501 / IP 470 / ISO 10478

Plus Silicon mg/kg 80 (Max) IP 501 / IP 470 / ISO 10478

Total Sediment, Potential % (m/m) 0.1 (Max) ISO 10307-2



UEN: 201835453D


Jet A-1 Aviation Fuel

Grade Designation: UNIT RESULT Acidity mg KOH/g 0.10 (Max)

Aromatics Vol. % 25.0 (Max)

Sulphur, Mercaptain % wt 0.003 (Max)

Sulphur, Total % wt 0.30

10% Distillation °C 205.0 (Max)

Final Boiling Point °C 300.0 (Max)

Distillation Residue % 1.5 (Max)

Distillation Loss % 1.5 (Max)

Flash Point °C 38.0 (Min)

Density at 15°C kg/m3 775 / 840.0

Freeze Point °C -47.0 (Max)

Viscosity at -20°C mm/s 8.0000 (Max)

Net Heat of Combustion MJ/kg 42.80 (Min)

One of the following shall be met :

1) Smoke Point or mm 25.0 (Min)

2) Smoke Point and mm 19.0 (Min)

Naphthalenes Vol. % 3.00 (Max)

Copper Strip Corrosion, 2h % 100°C - No. 1

Themal Stability

Filter Pressure Drop mm Hg 25 (Max)

Tube Deposits - < 3 (Max)

Existent Gum mg/100ml 7 (Max)

Water Reaction, Interface Rating - 1b (Max)

MSEP Rating -

Without electrical conductivity additive - 85

With electrical conductivity additive - 70

Electrical conductivity pS/m 50 (Min), 600 (Max)



UEN: 201835453D


Bitumen (Penetration 60/70)

Grade Designation: UNIT RESULT Test Method ASTM Specific Gravity at 25°C kg/m3 1.01 - 1.06 ASTM D70

Penetration @ 25°C mm/10 60 - 70 ASTM D5

Softening Point °C 49 - 56 ASTM D36

Ductility @ 25°C cm 100 (Min) ASTM D113

Loss On Heating (WT) % WT% 0.2 (Max) ASTM D6

Drop-In Penetration After Heating % 20 (Max) ASTM D5-D6

Flash Point °C 232 (Min) ASTM D92

Solubility in Trichloroethylene WT% 99 (Min) ASTM D2042

Spot Test - Negative * A.A.S.H.O.T 102



UEN: 201835453D


Bitumen (Penetration 80/100)

Grade Designation: UNIT RESULT Test Method ASTM Specific Gravity at 25°C kg/m3 1.01 - 1.06 ASTM D70

Penetration @ 25°C mm/10 80 - 100 ASTM D5

Softening Point °C 42 - 50 ASTM D36

Ductility @ 25°C cm 100 (Min) ASTM D113

Loss On Heating (WT) % WT% 0.2 (Max) ASTM D6

Drop-In Penetration After Heating % 20 (Max) ASTM D5-D6

Flash Point °C 250 (Min) ASTM D92

Solubility in Trichloroethylene WT% 99.5 (Min) ASTM D2042

Spot Test - Negative * A.A.S.H.O.T 102

global neft

Documents