global edm machines, consumables service / training
TRANSCRIPT
Global EDM, 7697 Innovation Way, Mason, Ohio 45040 USAhttp://globalsmsas.com
1
Global EDM, 7697 Innovation Way, Mason, Ohio 45040 USAhttp://globalsmsas.com
2
GLOBAL EDM Machines
Application solutions for your specific electric discharge machining requirements, across all industries e.g. Aerospace, Medical, Power Generation, Die / Mold, General Machining:
- Wire Cut EDM machines
- Fast Hole Drilling EDM machines
- Die Sinker EDM machines
- Manual & CNC EDM Drilling machines
Consumables: 800.290.7573Machines: [email protected]
Global EDM, 7697 Innovation Way, Mason, Ohio 45040 USAhttp://globalsmsas.com
3
Global EDM also supplies over 3,000 different EDM Parts & Consumables …….including Wire, Filters, Wear Parts, Resin, Fluids and Lubricants and Electrodes
……from all the top OEM suppliers and manufacturers.
GLOBAL EDM Consumables / Supplies
Consumables: 800.290.7573Machines: [email protected]
Global EDM, 7697 Innovation Way, Mason, Ohio 45040 USAhttp://globalsmsas.com
4
…..is designed to use the EDM process to excite Piezo responsive elements incorporated into the surface microstructure of the wire thereby enhancing the flushing process which is the key component to the efficiency of Wire EDM.
….is a double coated (epsilon brass plus gamma brass phases) brass EDM wire designed to take advantage of the high metal removal rate of a gamma coating during rough cuts and the superior surface finish produced by high zinc content coatings during skim passes.
NEW EDM WIRES from Global Innovative Products.
…improves metal removal rates, using hybrid coated EDM wire. The PLASMA economy grade brass is coated with a hybrid brass coating using a highly efficient coating process. The resultant wire generates significantly enhanced metal removal rates compared to premium brass products.
Global EDM, 7697 Innovation Way, Mason, Ohio 45040 USAhttp://globalsmsas.com
5
EXCETEK EDM offers a complete line of Wire, Die Sinkers, and Speciality Machines.
Global EDM is the exclusive importer in North America for EXCETEK Technologies’
(Taichung, Taiwan) complete line of EDM equipment.
Global EDM, 7697 Innovation Way, Mason, Ohio 45040 USAhttp://globalsmsas.com
6
Wire EDM DIE SINKERS
SPECIALITY MACHINES
Global EDM, 7697 Innovation Way, Mason, Ohio 45040 USAhttp://globalsmsas.com
7
WG/WP/WX Series Superb Design & Construction Rigid, heavily ribbed high-grade Meehanite castings. Reinforced water-cooled lower arm is made of high-strength alloy for maximum stiffness.
Premium Grade Components Ultra-precise direct-couple drive system - no belts. Fine pitch, ultra fine-finish ball screws and high resolution servo motors with 4 millionths resolution. Glass -scales.
Leading Edge Electronics Electrolysis-free machining. Digital Power Manager Technology. Superb accuracies and finishes up to RA 0.3um
WIRE EDM
Global EDM, 7697 Innovation Way, Mason, Ohio 45040 USAhttp://globalsmsas.com
8
Windows Based XP Control Feature-packed control is easy-to-use, versatile and has a large 15” easy-to-read, full color touch screen display.
Intelligent Servo Controlled Wire Threading Technology
Saves time, easy to use - threads at wire break point. No need to return to start point. Under 10 second spark-to-spark time with total reliabilitly.
Global EDM, 7697 Innovation Way, Mason, Ohio 45040 USAhttp://globalsmsas.com
9
NEW EXCETEK WG Plus EDM Wire
Machine Specifications
Global EDM, 7697 Innovation Way, Mason, Ohio 45040 USAhttp://globalsmsas.com
10
Wire Cut EDM WG Series
W350G W850G
Model Travels Max work-piece
W350G X13.8”xY9.8”xZ8.7” 27.6”x19.7”
W500G X19.7xY11.8”xZ12.2 33.5”x23.6”
W650G X25.6xY15.7”xZ16.1 43.3”x33.5”
W850G X31.5xY19.7”xZ16.1 43.3”x33.5”
Global EDM, 7697 Innovation Way, Mason, Ohio 45040 USAhttp://globalsmsas.com
11
WP Series Double Column Gantry
Travels: WP500 X 19.7 x Y 11.8 x Z 10.2
Maximum work-piece size: X 33.5 x Y23.6 x Z10.0
NO SEAL PLATE EXCLUSIVE TECHNOLOGY!
Global EDM, 7697 Innovation Way, Mason, Ohio 45040 USAhttp://globalsmsas.com
12
Travels: Max work-piece WX1060 X39.4” x Y23.6” x Z19.7” 59”X 40” WX1280 X47.2” x Y31.5” x Z31.5” 65”X 48” WX12100 X47.2” x Y39.4” x Z39.6” 65”X 55”
WX Series Fixed Bed
Global EDM, 7697 Innovation Way, Mason, Ohio 45040 USAhttp://globalsmsas.com
13
CNC DIE SINKERS
Travels: X15.8 “x Y11.8” Z13.8” Travels: X86.6“x Y39.4” Z23.6”
ED 400C ED 2200C
Global EDM, 7697 Innovation Way, Mason, Ohio 45040 USAhttp://globalsmsas.com
14
FH35ZA Axis Travel
X 13.8” Y 9.8” Z 13.8” W 7.8”
Table Size 24” x 12”
FH45ZA Axis Travel
X 17.7” Y 13.8” Z 13.8” W 7.8”
Table Size 24” x 12”
EDM Drills
Global EDM, 7697 Innovation Way, Mason, Ohio 45040 USAhttp://globalsmsas.com
15
FH600SCNC Axis travels
X23.6” Y15.8” Z15.8” W17.8
Work table 23.6”x18.8”
FH8060CNC Axis travels
X31.5” Y23.6” Z19.7” W19.7
Work table 31.5”x23.6
EDM Drills
Global EDM, 7697 Innovation Way, Mason, Ohio 45040 USAhttp://globalsmsas.com
16
Beaumont has designed, engineered,customized and manufactured EDM machines in USA for over 25 years.
Fast Hole EDM specifically built for the Aerospace and Industrial Gas Turbine industry.
• On / Off time of 999 micro seconds each way
• 65 AMPs current supply • Spindle rotation of 2,000 RPM • Water pressure 2,000psi at 18 to 20 µS. • Fanuc controls
Global EDM, 7697 Innovation Way, Mason, Ohio 45040 USAhttp://globalsmsas.com
17
Standard features:
• Fanuc31-B5 controls • 15” LCD Color Screen • Fanuc drives • Operator’s remote pendant • EBBCO Dielectric systems • Medium & High Pressure Flush • 2000 RPM Spindle • B Axis with Heidenhain Glass Scale (Tilting Head) +/- 120 degrees
• Granite table with SS inserts
Global EDM, 7697 Innovation Way, Mason, Ohio 45040 USAhttp://globalsmsas.com
18
Robotic Tool Changer
• 24 station tool changer • Fanuc LR Mate Robot • Change up to 18 electrodes
and 6 guides • Uses standard Fanuc tool
managment software • Image selection requires full
enclosure and riser
Global EDM, 7697 Innovation Way, Mason, Ohio 45040 USAhttp://globalsmsas.com
19
FH Series Options
Accuracy• C Axis Heidenhain scales • Work Piece positioning probe • Laser compensation measurement
Water Filtration• Dielectric Water filtration system
Programming• Unigraphics post processor
Global EDM, 7697 Innovation Way, Mason, Ohio 45040 USAhttp://globalsmsas.com
20
Summary : Global EDM Corporate Strengths
• Historic Background : KERN EDM • Large Customer Base • Established Consumables Brands: Maxis, Axiom, Gamma, Optima, Blaze, Epsilon, Plasma • Exclusive : Sumitomo • Diversified Vendors: Thermo, Stamm, PAPS, FECO, Hitachi, SWIL, Powerway • POCO Graphite & Machining • Bases: Regional and International • Testing and Quality: ITP/ Roger Kern • Research & Development: Metallurgy & Manufacturing • Application Support: Brad Hansford , Ed Beaumont, and Roger Kern • Strategic Investment: Potential Acquisitions England , Germany and England
Global EDM, 7697 Innovation Way, Mason, Ohio 45040 USAhttp://globalsmsas.com
21
Visit us at Booth # E-5033
Consumables: 800.290.7573Machines: [email protected]