glider - michaels stores...step 1: trace glider template onto chipboard. step 2: paint the glider as...
TRANSCRIPT
passport to
Imagination®
museum road trip
©2014 Michaels Stores, Inc.
materials
• Recollections® Chipboard, 12" x 12"
• Craft Smart® Acrylic Paint – Red, White and Gray
• Crayola® Kids’ Pointed Scissors
• Creatology® Paintbrushes, 10 ct. – Assorted
instructions
step 1: Trace glider template onto chipboard.
step 2: Paint the glider as desired, using the photo as a guide.
step 3: Cut out the pieces, then cut the slit in the body of the airplane where indicated. Slide the wing through the body of the airplane.
step 4: Paint as shown, or as desired. Let dry.
Glider
register now to reserve your spot. $2 for 2 hours!
Visit michaels.com/passport to sign up today!
WeeK 3 | Pima air and Space museum
Destination project Start Crafting this project at your local Michaels.
passport to
Imagination®
museum road trip
©2014 Michaels Stores, Inc.
WeeK 3 | Pima air and Space museum
Destination project Start Crafting this project at your local Michaels.
passport to
Imagination®
museum road trip
©2014 Michaels Stores, Inc.
materials
• Creatology® Craft Stick Economy Pack
• Creatology™ Clothespin
• Craft Smart® Acrylic Paint – Red and White
• Elmer’s® Glue
• Creatology™ Paintbrushes, 10 ct. – Assorted
instructions
step 1: Paint clothespin red. Let dry.
step 2: Paint two large craft sticks for the wings, red and white striped. Let dry.
step 3: Paint one small craft stick white and add red dots, using the end of a paintbrush. Let dry.
step 4: Glue one large craft stick on the top of the clothespin, just above the spot where the spring is located. Use image as a guide. Let dry.
step 5: Glue the other large craft stick to the bottom of the clothespin, parallel to the one in Step 4. Use image as a guide. Let dry.
step 6: Glue the small craft stick to the top of the clothespin, near the end. Use image as a guide. Let dry.
Biplane
register now to reserve your spot. $2 for 2 hours!
Visit michaels.com/passport to sign up today!
WeeK 3 | Pima air and Space museum
Destination project Start Crafting this project at your local Michaels.
passport to
Imagination®
museum road trip
©2014 Michaels Stores, Inc.
materials
• Creatology™ Construction Paper – Assorted Colors
• Woodsies® Shapes Sticks
• Crayola® Oil Pastels
• Crayola® Markers
• Elmer’s® Glue
• Sharpie® Marker, Fine – Black
instructions
step 1: Using the picture as a guide, color the appropriate sized craft sticks and wood shapes with Crayola® markers to create the biplane.
step 2: Cut a piece of blue construction paper to 4" x 6". Color clouds using oil pastels.
step 3: Lay out the sticks and wood shapes to create the biplane. Glue into place.
step 4: Add details to the plane using a black Sharpie® marker.
craft stick Biplane
register now to reserve your spot. $2 for 2 hours!
Visit michaels.com/passport to sign up today!
WeeK 3 | Pima air and Space museum
alBum project Start Crafting this project at your local Michaels.
passport to
Imagination®
museum road trip
©2014 Michaels Stores, Inc.
paper airplanes
WeeK 3 | Pima air and Space museum
at-Home project Continue the Creative Learning at Home!
materials
• Klutz® Book of Paper Airplanes
• Crayola® Markers (Optional)
• Plain White Paper (Optional)
instructions
step 1: Follow directions in book for each airplane.
step 2: Use paper (or white printer paper) included in book to make airplane(s).
step 3 optional: Color airplane with markers as desired.
passport to
Imagination®
museum road trip
©2014 Michaels Stores, Inc.
materials
• Recollections® Chipboard, 12" x 12"
• Creatology™ Paint Pad, 9" x 12"
• Crayola® Markers
• Red Heart® Super Saver® Yarn – Bright Yellow
• Straw
• Elmer’s® Glue Stick
• Crayola® Kids’ Pointed Scissors
instructions
step 1: Use the pattern to trace fighter jet onto a piece of heavy paper from the paint pad.
step 2: Color plane in as desired, or use image as a guide.
step 3: Glue the colored airplane to the chipboard. Cut out the plane.
step 4: Glue straw to the back of the plane.
step 5: Thread string or yarn through the straw.
step 6: Tie one end of the yarn or string to a door knob or piece of furniture. Have someone hold the other end so the string is taut.
step 7: Push the plane along the string to fly.
Flying Fighter plane
register now to reserve your spot. $2 for 2 hours!
Visit michaels.com/passport to sign up today!
WeeK 3 | Pima air and Space museum
Destination project Start Crafting this project at your local Michaels.
passport to
Imagination®
museum road trip
©2014 Michaels Stores, Inc.
WeeK 3 | Pima air and Space museum
Destination project Start Crafting this project at your local Michaels.
passport to
Imagination®
museum road trip
©2014 Michaels Stores, Inc.
materials
• Origami Paper, Mega Pack
• Crayola® Markers
instructions
step 1: Lay origami paper flat. Fold down the middle, then unfold, to create a crease.
step 2: Next, fold each corner towards the crease line.
step 3: Fold along the crease line to form the body of the airplane. Then fold the wings down, one at a time.
step 4: Unfold the wings to produce your paper airplane.
step 5: Decorate you airplane, if desired, using markers.
origami plane
register now to reserve your spot. $2 for 2 hours!
Visit michaels.com/passport to sign up today!
WeeK 3 | Pima air and Space museum
alBum project Start Crafting this project at your local Michaels.
passport to
Imagination®
museum road trip
©2014 Michaels Stores, Inc.
materials
• Perler® Beads 110 Patterns Vol. 1
• Perler® Bead Bucket
• Perler® Peg Boards
• Iron (ADULT USE ONLY)
instructions
step 1: Use patterns to create the rocket ship, astronaut and planet.
step 2: Follow package directions for the ironing portion of the project.
perler® rocket ship & astronaut
WeeK 3 | Pima air and Space museum
at-Home project Continue the Creative Learning at Home!
passport to
Imagination®
museum road trip
©2014 Michaels Stores, Inc.
materials
• Perler® Bead Bucket
• Perler® Peg Board
• Iron (ADULT USE ONLY)
instructions
step 1: Use pattern to create the space shuttle.
step 2: Follow package directions for the ironing portion of the project.
perler® space shuttle
register now to reserve your spot. $2 for 2 hours!
Visit michaels.com/passport to sign up today!
WeeK 3 | Pima air and Space museum
Destination project Start Crafting this project at your local Michaels.
passport to
Imagination®
museum road trip
©2014 Michaels Stores, Inc.
materials
• Recollections® Value Pack Cardstock, 81/2" x 11" – Black
• Creatology™ Construction Paper Pad, 9" x 12" – Assorted
• Creatology™ Bright Tissue Squares
• Elmer’s® Glue Stick
• Creatology™ Glitter Glue – Silver
• Crayola® Kids’ Pointed Scissors
instructions
step 1: Cut construction paper into shapes to make rocket ship and planets. Use image as a guide.
step 2: Glue the rocket ship and planets to the black cardstock.
step 3: Add orange or yellow tissue at the end of the spaceship for flame.
step 4: Use silver glitter glue to make stars.
shoot for the stars
register now to reserve your spot. $2 for 2 hours!
Visit michaels.com/passport to sign up today!
WeeK 3 | Pima air and Space museum
alBum project Start Crafting this project at your local Michaels.
passport to
Imagination®
museum road trip
©2014 Michaels Stores, Inc.
materials
• Revell® SnapTite® Space Shuttle Kit
instructions
step 1: Follow kit directions to assemble Space Shuttle.
step 2: Plan your first launch!
space shuttle model
WeeK 3 | Pima air and Space museum
at-Home project Continue the Creative Learning at Home!