glastender®home cocktail stationscabinets.danver.com/asset/glastenderhome_fullspecs.pdfglastender...

DANVERDANVER

Glastender home cocktail stations are manufactured to the same level of detail as the commercial equipment we have been manufacturing for over 40 years. Attractive, intuitive design makes the cocktail stations a pleasure to use and easy to maintain.

STAINLESS STEEL CABINETRY1 GRAND STREET, WALLINGFORD, CT 06492 • WWW.DANVER.COM • FAX: 203 265-6190 • TOLL FREE: 888 441-0537

DANVERDANVER

Information and Images courtesy of Glastender, Inc.

Glastender®Home Cocktail Stations


DANVERDANVER


DANVERDANVER�e Di�erence Is In �e Details

Glastender home cocktail stations are manufactured to the same level of detail as the commercial equipment we have been manufacturing for over 40 years. Attractive, intuitive design makes the cocktail stations a pleasure to use and easy to maintain.

GLASTENDERHOME COCKTAIL STATION - FEATURES

The easy-to-clean sink is stainless steel and seam-lessly welded into the work surface. Drain fitting is included.

Welded drain-board glass storage area consisting of a stamped pan and perforated insert provides air circulation for drying glassware.

The lighted bottle rail, available in 6" increments from 24" to 48" long, adds a special highlight to your cocktail area.

Condiment cups are conveniently located at the rear of the cocktail ice bin. A hinged stainless steel sanitary cover is included.

The bottle rail and cap catcher have a chamfered top rail for added strength and an attractive appearance.

Foamed-in-place insulation and an ABS plastic breaker strip around the ice bin liners prevent thermal transfer from outside the ice bin so your ice lasts longer.


DANVERDANVER

DANVERDANVERGlastender®Home

BCS 30 & BCS 42 – Built-In Cocktail Stations

Entertain your guests like a professional with this built-in cocktail station designed for installation into an outdoor island.The BCS30 (30" w) and BCS42 (42" w) include a cocktail ice bin with sliding stainless steel cover, three condiment cups, bottle well for iced bottle storage, sink with cold water faucet, cutting board, bottle rail, towel bar, and bottle opener and cap catcher.The BCS42 (shown) also includes a seamlessly welded drainboard glass storage area.

BCS42



DANVERDANVER


DANVERDANVER GLASTENDERHOME BCS30 & 42 - FEATURES & SPECS

STANDARD FEATURES • Weather resistant stainless steel construction. • Includes a cocktail ice bin with sliding stainless steel cover, three condiment cups, bottle well for iced bottle storage, sink with cold water faucet, cutting board, bottle rail, towel bar, and bottle opener and cap catcher. • Condiment area includes hinged stainless steel sanitary cover. • BCS42 model includes a seamlessly welded drainboard glass storage area consisting of a stamped pan and perforated insert providing air circulation for drying glassware. • Removable cutting board is easy to clean and allows you to replenish condiments right at the station. • The convenient bottle rail provides easy access storage for bottles and includes a front mounted towel bar. • Mounted below the bottle opener is a removable cap catcher for easy disposal during clean-up. • Insulated bottle well storage for chilling juices, mixes, or wine is separate from the cocktail ice bin liner, preventing contamination of the ice used to make your cocktails. • The easy to clean sink is stainless steel and seamlessly welded into the work surface. Drain fitting is included. • Foamed-in-place insulation and an ABS plastic breaker strip around the ice bin liners prevent thermal transfer from outside the ice bin so that your ice lasts longer.

SPECIFICATIONS

Dimensions: BCS30 BCS42

Height*: 11" 11"

*NOTE: Does not include ice bin cover, faucet, or drain.

Width: 30" 42"

Depth†: 313/4" 313/4"

†NOTE: Includes speed rail and towel bar.

Shipping weight: 140 lbs. 160lbs.

Cutout Dimensions: BCS30 BCS42

Height: 101/2" 101/2"

Width: 301/4" 421/4"

Depth: 23" 23"

Drains:

• Sink – 11/2" I.P.S. threaded drain fitting

• Ice bin – 11/2" tailpiece

• Bottle well – 11/2" tailpiece

• Glass storage area (BCS42 only) – 11/2" tailpieceNOTE: Provide suitable drain systems in accordance with local codes for all drains. The drains must be accessible.

Sink Bowl Dimensions:

91/4" by 111/2" by 6" deep

Faucet:

Deck mount, cold water only, accepts 3/8" sink lead.NOTE: Use a certified plumber to connect and install potable water supply and drain system to the built-in cocktail station in accordance with local code requirements.

Specifications subject to change without notice. For current specifications please contact us.

COCKTAIL CART A - Cocktail ice bin with sliding cover B - Flip-up work table C - Condiment cups D - Bottled beverage ice bin E - Handle and towel bar F - Bottle open & cap catcher G - Bottle storage rail H - Drain valve I - Storage shelf

BCS42


DANVERDANVER


DANVERDANVER GLASTENDERHOME BCS30 & 42 - DIMENSIONS

BUILT-IN COCKTAIL STATIONS A - Insulated bottle well B - Condiment cups C - Cocktail Ice bin with sliding cover D - Cold water faucet E - Stainless steel sink F - Drainboard Glass storage area (BCS42 only) G - Bottle storage rail H - Towel bar I - Removable cutting board J - Bottle open & cap catcher


DANVERDANVER


DCS 30 & DCS 42 – Drop -In Cocktail Stations

Stylish and functional, drop-in cocktail stations are designed for installation into standard household cabinets so you can have a professional bar at home. The DCS30 (30" w) and DCS42 (42" w) both include a main ice bin with sliding stainless steel cover, three condiment cups, bottle well for iced bottle storage, and sink. Hot and cold water faucet is optional.The DCS42 (shown) also includes a seamlessly welded drainboard glass storage area.


DCS42with optional faucet


DANVERDANVER


DANVERDANVER GLASTENDERHOME DCS30 & 42 - FEATURES & SPECS

STANDARD FEATURES • Weather resistant stainless steel construc tion with galvanized steel exterior wrap on ice bin below work surface. • Unique hemmed edge for added strength and visual appeal. • Includes mounting brackets for a gap-free installation. • Includes a main ice bin with sliding stainless steel cover, three condiment cups, bottle well for iced bottle storage, and sink. Hot and cold water faucet is optional. • Condiment area includes hinged stainless steel sanitary cover. • DCS42 model includes a seamlessly welded drainboard glass storage area consisting of a stamped pan and perforated insert providing air circulation for drying glassware. • Insulated bottle well storage for chilling juices, mixes, or wine is separate from the cocktail ice bin liner, preventing contamination of the ice used to make your cocktails. • The easy to clean sink is stainless steel and seamlessly welded into the work surface. Drain fitting is included. • Foamed-in-place insulation and an ABS plastic breaker strip around the ice bin liners prevent thermal transfer from outside the ice bin so that your ice lasts longer. • Custom configurations available upon request.

SPECIFICATIONS

Dimensions: DCS30 DCS42

Height*: 9" 9"

*NOTE: Does not include ice bin cover, or faucet.

Width: 30" 42"

Depth†: 19" 19"

†NOTE: Includes speed rail and towel bar.

Shipping weight: 75 lbs. 85 lbs.

Cutout Dimensions: DCS30 DCS42

Width: 281/2" 401/2"

Depth: 171/2" 171/2"

Drains:




• Glass storage area – no drain or optional 11/2" I.P.S. threaded drain fitting - specify if required when ordering.NOTE: Provide suitable drain systems in accordance with local codes for all drains. The drains must be accessible.


91/4" by 111/2" by 6" deep

Faucet (optional):

Holes for mounting a faucet are provided. Two holes on 4" centers is standard. If an alternate pattern is required, please specify when ordering.

An optional hot and cold water faucet is available as an accessory.

Specify part number 03000457 when ordering.NOTE: Use a certified plumber to connect and install potable water supply and drain system to the drop-in cocktail station in accordance with local code requirements.


DCS42with optional faucet


DANVERDANVER


DANVERDANVER GLASTENDERHOME DCS30 & 42 - DIMENSIONS

BUILT-IN COCKTAIL STATIONS A - Drainboard Glass storage area B - Insulated bottle well C - Condiment cups D - Cocktail Ice bin with sliding cover E - Stainless steel sinkNote: Faucet is optional. Specify if required when ordering.


DANVERDANVER


Finished Stainless Steel Counter Top for your Home Bar

Replace your entire cabinet top with a unique stainless steel finished top cocktail station for a stylish look that shows your guests you really know how to entertain.The stainless steel counter top can be installed with any cabinetry. The drain-board, cocktail ice bin, bottel well, and lighted bottle rail are optional features, and are offered in a variety of sizes that can be custom built to suite your unique needs.



DANVERDANVER


DANVERDANVER GLASTENDERHOME FT - FEATURES & SPECS

STANDARD FEATURES • Stainless steel construction. • Includes radius bend top edge on front and sides. Available with non-radius edge on one or both sides for mounting next to a wall or vertical panel. • Front-to-back dimension is 251/4" (custom sizes available). Specify length to suit your needs up to 96". • Configurable top elements include a seamlessly welded drainboard glass storage area, bottle well, cocktail ice bin, and sink. • The optional seamlessly welded drainboard glass storage area consists of a stamped pan with perforated insert providing air circulation for drying glassware. Available in 12", 18", 24", or 30" sizes. • The optional cocktail ice bin includes sliding stainless steel cover with condiment cups. Available in 12", 18", or 24" sizes. • The optional bottle well and cocktail ice bin are foamed-inplace insulated with an ABS plastic breaker strip around the ice bin liner to prevent thermal transfer from outside the ice bin so that your ice lasts longer. • The optional easy to clean sink is stainless steel and seamlessly welded into the work surface. Faucet holes provided - specify hole pattern required. Drain fitting is included. • Bottle rail accessory is available to mount inside the cabinet door below the top for easy-access storage for bottles (See Bottle Rail Specification Sheet). • A lighted bottle rail accessory is available in 6" increments from 24" to 48" long to set on the rear portion of the top, providing a special highlight to your cocktail area. • Optional jeweled finish is available. Standard top finish is brushed stainless steel. See next page for photo comparision of top finishes.

SPECIFICATIONS

Dimensions:

Height*: Top is 11/2". Including the ice bin element, 91/2" with additional clearance required for drain.

Width: As specified by customer with maximum of 96".

Depth: 251/4". Custom sizes available upon request.

Drains:




• Glass storage area – no drain or optional 11/2" I.P.S. threaded drain fitting - specify if required when ordering.*NOTE: Provide suitable drain systems in accordance with local codes for all drains. The drains must be accessible.


91/4" by 111/2" by 6" deep

Faucet (optional):

Holes for mounting a faucet are provided. Two holes on 4" centers is standard. If an alternate pattern is required, please specify when ordering.

An optional hot and cold water faucet is available as an accessory. Specify part number 03000457 when ordering.NOTE: Use a certified plumber to connect and install potable water supply and drain system to the drop-in cocktail station in accordance with local code requirements.


Shown: 68" finished top withoptional faucet and 36" lightedbottle rail accessory (cabinetbase not included)


DANVERDANVER


DANVERDANVER GLASTENDERHOME FT - DIMENSIONS

FINISHED TOP COCKTAIL STATION A - Specify overall length of top in inches. B - Specify left top edge style - 90º bend or radius bend. C - Specify front top edge style - 90º bend or radius bend. D - Specify right top edge style - 90º bend or radius bend. E - If drain pan is required, specify size (12", 18", 24" or 30") and center line location from left edge of top. F - If bottle well is required, specify size (6", 12", 18" or 24") and center line location from left edge of top.

G - If cocktail ice bin is required, specify size (12", 18" or 24") and center line location from left edge of top. H - If sink is required, specify center line location from left edge of top. Holes for mounting a faucet are provided. Two holes on 4" centers is standard. If an alternate pattern is required, please specify when ordering.

Note: A factory created approval drawing is supplied once all confgurable information is provided.

TOP FINISH OPTIONSThe standard top finish isbrushed stainless steel.An optional stainless steeljewel finish is available.

Standard brushed stainless steel Optional jewel finish


DANVERDANVER



CC18 x 30 — Cocktail Cart

Take the party with you and do it in style with this commercial-grade cocktail cart designed to go where the party is, indoors or out.Includes a main ice bin with sliding stainless steel cover, three condiment cups, bottle well for iced bottle storage, flip-up work board, handle/towel bar, bottle rail, bottle opener and cap catcher, bottom storage shelf, and heavy duty casters.


DANVERDANVER


DANVERDANVER GLASTENDERHOME CC18X30 - FEATURES & SPECS

STANDARD FEATURES • Weather resistant stainless steel construction. • Includes a main ice bin with sliding stainless steel cover, three condiment cups, bottle well for iced bottle storage, flip-up work board, handle/towel bar, bottle rail, bottle opener and cap catcher, bottom storage shelf, and heavy duty casters. • Condiment area includes hinged stainless steel sanitary cover. • The convenient bottle rail provides easy access storage for bottles. • Mounted below the bottle opener is a removable cap catcher for easy disposal during clean-up. • Insulated bottle well storage for chilling juices, mixes, wine and other bottled beverages is separate from the cocktail ice bin liner, preventing contamination of the ice used to make your cocktails. • The flip-up work board can be lowered for more convenience during transport.

• Foamed-in-place insulation and an ABS plastic breaker strip around the ice bin liners prevent thermal transfer from outside the ice bin so that your ice lasts longer. • Four 4” heavy-duty rubberized casters, the two front side casters are locking.

SPECIFICATIONSDimensions:

Height: 30” Does not include ice bin cover.

Width: 451/4” 355/8” with work board lowered. Body of unit is 30”

Depth: 23” Includes speed rail. Body of unit is 18”.

Shipping Weight: 140 lbs.Drains • Ice bin – 1” tailpiece. Includes factory installed drain valve. No plumbing hook-up required. • Bottle well – 1” tailpiece. Includes factory installed drain valve. No plumbing hook-up required.

COCKTAIL CART A - Cocktail ice bin with sliding cover B - Flip-up work table C - Condiment cups D - Bottled beverage ice bin E - Handle and towel bar F - Bottle open & cap catcher G - Bottle storage rail H - Drain valve I - Storage shelf


DANVERDANVER

DANVERDANVERGlastender®Home Lighted Bottle Rails

SPEC SHEET


STANDARD FEATURES • Stainless steel construction. • Translucent acrylic top allows light to illuminate bottles. • Includes rubber feet to prevent countertop scratches. • On/off switch and power cord may be located left or right. Specify with L or R suffix in model number when ordering. • Long lasting, energy efficient LED lights. • Available in 6" incremental widths from 24" up to 48".

SPECIFICATIONS

Dimensions:

Height: 21/8"

Width: 24", 30", 36", 42", 48"

Depth: 53/8"

Electrical:

120V, 1 phase, 50/60Hz, less than 5 full load amps. Includes on/off switch and low voltage power supply cord and plug.

LBR36L

Models: LBR24L, LBR24R, LBR30L, LBR30R, LBR36L, LBR36R, LBR42L, LBR42R, LBR48L, and LBR48R

Add a special highlight and conversation piece to your home bar with a stainless steel lighted bottle rail. This home bar design accessory is a must for displaying your favorite liquors!


DANVERDANVER


DANVERDANVER GLASTENDERHOME LIGHTED BOTTLE RAILS-DIMENSIONS

POWER CORD AND ON/OFF SWITCHAVAILABLE LEFT OR RIGHT

X = OVERALL LENGTH Available 24", 30", 36", 42", and 48".


DANVERDANVER


Stainless Home Bar Bottle Rails


STANDARD FEATURES • Weather-resistant stainless steel construction. • Unique chamfered top edge for added strength and visual appeal. • Perforated bottom prevents water build-up in outdoor applications. • Back has two key-hole slot mounting holes. • Available in custom widths up to 42". • Door mounted models have extended side tabs for mounting to the frame on the inside of a typical panel style cabinet door.

SPECIFICATIONS

Contact us.

Model Numbers:

Front mounted bottle rails: FBR12, FBR18, FBR24, FRB30, FBR36, FBR42

Door mounted bottle rails: DBR7, DBR10, DBR13, DBR16, DBR19

DBR13

DBR13 Installed

FBR12

Stainless steel bottle rails are great for adding storage to your home bar. Store liquor bottles in easily accessible locations, either on a wall or on the inside of a cabinet door.


DANVERDANVER


DANVERDANVER GLASTENDERHOME STAINLESS BOTTLE RAILS-DIMENSIONS

FRONT MOUNTED BOTTLE RAILSMounting holes are in the rear panel of the rail.

Model Number X FBR12 12” FBR18 18” FBR24 24” FBR30 30” FBR36 36” FBR42 42” FBR48 48”

DOOR MOUNTED BOTTLE RAILSInclude special side tabs for mounting to the frame on the inside of a panel door.The body of the rail (X dimension) should be 2" less than the door opening.

Model Door Cabinet Number X Y Opening Width DBR7 7” 81/4” 9” 12” DBR10 10” 111/4” 12” 15” DBR13 13” 141/4” 15” 18” DBR16 16” 171/4” 18” 21” DBR19 19” 201/4” 21” 24”

glastender®home cocktail stationscabinets.danver.com/asset/glastenderhome_fullspecs.pdfglastender...

Documents