gholamreza fathifazl, ph.d., p.eng. - carleton …wellington building is a designated heritage...

Curriculum Vitae: G. Fathifazl 1

Gholamreza Fathifazl, Ph.D., P.Eng.

Cleland Jardine Consulting Engineers Associates

580 Terry Fox Dr.

Ottawa, Ontario K2L 4B9, Canada

Tel: (Work) +1 613 591-1533 ex.244

E-mail: [email protected]

Homepage: http://www1.carleton.ca/cee/people/fathifazl-gholamreza

Google Scholar: http://scholar.google.com/citations?user=sIfqjGcAAAAJ&hl=en

LinkedIn: ca.linkedin.com/in/rezafathifazl/

EDUCATION

Ph.D. (2008) Carleton University, Dept. of Civil and Environmental Engineering, Ottawa, Canada M.Sc. (2002) Iran University of Science and Technology, Dept. of Civil Engineering, Tehran, Iran B.Sc. (1995) Guilan University, Dept. of Civil Engineering, Rasht, Guilan, Iran (Honours)

CAREER PROFILE

• Over 18 years of experience in structural analysis and design; seismic evaluation, upgrade and

fit-up; rehabilitation and renovation of several residential; commercial, recreational, heritage

and specialty projects (international and nationwide)

• Extensive experience in seismic evaluation, seismic upgrade, and fit-up, as well as retrofitting

existing heritage, masonry, steel and FRP reinforced concrete, and steel structures according to

applicable Canadian Standards (NBC 2010, OBC 2006, CSA A23.3-04, CSA S806-12, CSA

S850-12, CSA S16-09, and CSA S304.1-04)

• Extensive experience in modeling, analysis and structural design of masonry, steel and FRP

reinforced concrete, and steel building structures under static and dynamic loading using

ETABS, SAFE, and SAP2000 software

• Extensive Experience with dynamic analysis and seismic design of structures

• Extensive experience in vibration analysis of sensitive structures (stairs, footbridges, long

cantilever structures, etc.)

• Extensive Experience in analysis and design of different types of foundations (shallow and

deep)

• Experience in analysis and design of different standard and non-standard connections (rigid,

semi-rigid, and simple)

• Familiar with ACI 318, ASCE 7, AISC 360 and IBC Standards

• Completing projects from FEED to detailed structural design and construction

• Developing innovative and cost-effective structural solutions to meet the architectural

objectives, functional requirements, and to ensure the needs of the client and other

engineering, design and construction disciplines

• Managing and mentoring junior engineers, supervising and coordinating the work of others

EMPLOYMENT RECORD

Adjunct Research Professor, Department of Civil and Environmental Engineering July 2013– Present Carleton University, Ottawa, Canada


Contract Instructor, Department of Civil and Environmental Engineering Sep. 2012 – Present Carleton University, Ottawa, Canada Technical Specialist - Structural Engineering Oct. 2014 – Present Cleland Jardine Engineering Ltd., Ottawa, Ontario, Canada Technical Lead - Structural Engineering Feb. 2014 – Oct. 2014 Halsall Associates, Ottawa, Ontario, Canada Seismic Engineer & Senior Design Engineer Dec. 2007 - Feb. 2014 Adjeleian Allen Rubeli Ltd. Structural Engineers, Ottawa, Ontario, Canada Visiting Researcher, Materials Technology Laboratory of Natural Resources Canada Ottawa, Ontario, Canada Sep. 2004 - Jan. 2008 Research Assistant, Department of Civil and Environmental Engineering Sep. 2004 - Jan. 2008 Carleton University, Ottawa, Canada Senior Structural Design Engineer, Engineering Department, Housing July 2001 - Aug. 2004 (Maskan) Bank, Tehran, Iran Research Assistant, Department of Civil Engineering Sep. 2000 - Aug. 2002 Iran University of Science and Technology, Tehran, Iran

Teaching Assistant, Department of Civil Engineering Sep. 2000 - Aug. 2002 Iran University of Science and Technology, Tehran, Iran Project Engineer, Sepidshahr Developers, Tehran, Iran Feb. 2000 - July 2001 Field Engineer, Gueno Consulting Engineers Inc., Tehran July 1997 - Jan. 2000 Field Engineer, Qazvin Kheshtpol Construction Co. Aug. 1995 - July 1997 Tehran, Iran Engineer in Training (B.Sc. Program Requirement), Qazvin Kheshtpol May 1994 - Sep. 1994 Construction Co., Qazvin, Iran Engineer in Training (B.Sc. Program Requirement), Qazvin Kheshtpol May 1992 - Sep. 1992 Construction Co., Qazvin, Iran

FEATURED DESIGN PROJECTS

Heritage Buildings • Wellington Building Renovation (Recognized Federal Heritage

Building), Ottawa, Canada: Seismic Evaluation, Upgrade, and Fit-up Role: Lead Structural Engineer Estimated cost: $452 million CAD Year Originally Built: 1927 and 1959 Size: 43,725 square-metres Project Completion: In progress

Wellington Building is a designated heritage building, constructed in two phases: 1927 and 1959. The building includes 3 independent structures, separated by expansion joints. The project includes renovation and upgrade of the building to house parliamentary offices and committee meeting rooms, and seismic upgrade to meet NBC2005. The design solution includes demolition of a large interior section of the building, and reconstruction of this section to incorporate all the seismic resisting elements, and large open spaces for the Multi-Purpose Rooms. The seismic and wind design was completed for both the final building configuration, as well as the intermediate construction phase, with a large section of the building


demolished. Structural seismic upgrade and exterior wall seismic stabilization (phase I) is completed.

• West Memorial Building (Recognized Federal Heritage Building), Ottawa, Canada: Seismic Evaluation Role: Senior Design Engineer / Seismic Engineer Year Originally Built: 1956

West Memorial Building is a designated heritage building, constructed in 1956. It is a seven storey building, primarily composed of concrete slabs supported on concrete beams and concrete columns.

• Confederation Building (Recognized Federal Heritage

Building), Ottawa, Canada: Seismic Evaluation Role: Senior Structural Engineer/Seismic Engineer Project Completion: Completed This Options Analysis Report has been developed under the Recapitalization Program to address building envelope (roof, masonry and windows), and structural problems at an early stage of the conservation. and to develop a long-term implementation strategy. The structural assessment was based on the original structural drawings of the building, review of previous reports, visual review of the façades, and new exploratory openings completed. The structural analysis addressed condition of the masonry, condition of the embedded structural steel components, anchorage of the exterior wall to the building structure, and stability of the wall under seismic loads.

• The Parliament of Canada East Block Masonry Towers (Recognized Federal Heritage Building), Parliament Hill, Ottawa, Canada: Seismic Evaluation and Upgrade Role: Senior Structural Engineer/Seismic Engineer Project Completion: In progress

• The Parliament of Canada Centre Block (Recognized Federal Heritage Building), Parliament Hill, Ottawa, Canada: Seismic Evaluation and Upgrade Role: Senior Structural Engineer/Seismic Engineer Project Completion: In progress The Centre Block and Peace Tower on Parliament Hill building is a “Classified” heritage structure and is considered the most important building in Canada.


• Canada Reception Centre (Hangar 11) – MacDonald-Cartier International Airport (Recognized Federal Heritage Building), Ottawa, Canada: Seismic Evaluation and Upgrade Role: Lead Structural Engineer Project Completion: Completed

Hangar 11 is a balanced and symmetrical building composed of an arched, long span hangar space, flanking lateral offices tucked into the sides of the arch and a central entrance, all bracketed by two large masonry pocket door towers. Hangar 11 is a large, prominent building located on the edge of a flying field at the former CFB Ottawa-Uplands and the current Ottawa International Airport. The designation is confined to the footprint of the building.

Complete fit-up of the main reception area. Reception/Visitor Centre area is for VIP persons visiting Canada. Major structural portion of the work included partial reconstruction and seismic upgrade to one of the large hangar door wells which consists of block masonry and brick construction.

• Lansdowne Park – Horticulture Building (Recognized

Federal Heritage Building), Ottawa, Canada: Seismic Evaluation, Upgrade, and Fit-up Role: Lead Structural Engineer Project Completion: In progress The Horticultural Building has a long-standing tie with the Central Canada Exhibition, which was founded in 1888 and is the oldest continuously operating agricultural fair in Canada. The Horticulture Building was completed in 1914 just in time for that year's opening of the exhibition. As one of eight exhibition buildings on the grounds of Lansdowne Park in Ottawa, the Horticultural Building occupies a key portion of the exhibition grounds adjacent to the steel clad Aberdeen Pavilion. In addition to serving the annual Exhibition, this building also served a second function as a public curling rink during the winter season.

New Construction • The Algonquin College, Student Commons, Ottawa,

Canada Role: Senior Structural Engineer Cost: $154 million CAD Size: 192,000 square feet Year Originally Built: 1983 Project Completion: April 2011 Award: The Canadian Design-Build Institute (CDBI) Award Winner (2013)

• Sensplex East, Ottawa, Canada

Role: Senior Structural Engineer/Seismic Engineer Estimated Cost: $26 million CAD Project Completion: In progress (Scheduled opening: September 2014)


• Ottawa Congress Centre Redevelopment, Ottawa, Canada Role: Senior Structural Engineer Cost: $154 million CAD Size: 192,000 square feet Year Originally Built: 1983 Project Completion: April 2011 Awards: Tourism Industry Association of Canada (TIAC) 2011 Award / City of Ottawa 2011 Award of Merit for Urban Infill (mid- to high-rise) / OAA Award for Design Excellence 2011 / OAA People’s Choice Award for Design 2011 / The Willis Chipman Award Winner at the Consulting Engineers of Ontario (CEO) Awards Gala 2013 The Ottawa Convention Centre is a new facility completed in 2010 to replace the 30 year old Ottawa Congress Centre. The building is comprised of 4 levels of meeting rooms and convention halls of various sizes framed in structural steel. The design features sloped steel tube columns on the west side of the building as part of the iconic curved glass exterior wall system developed for this project.

• The Ottawa Train Yards Building, Ottawa, Canada Role: Senior Structural Engineer/Seismic Engineer Cost: $65 million CAD Size: 22,270 square metres Project completion: January 2013

• Lansdowne Park Redevelopment, Ottawa, Canada Role: Senior Structural Engineer Cost: $290.8 million CAD Project completion: In progress (Scheduled opening: 2015)

• The 90 Elgin Street Redevelopment, Ottawa, Canada Role: Senior Structural Engineer/Seismic Engineer Cost: $124 million CAD Size: 60,000 square metres Project completion: In progress (Scheduled opening: November 2014)


• 319 McRae Avenue, Ottawa, Canada Role: Senior Structural Engineer Size: 15,000 square metres Project completion: In progress (Scheduled opening: 2015)

• University of Ottawa Henderson Student Residence, Ottawa, Canada

Role: Senior Structural Engineer Project completion: In progress (Scheduled opening: 2015)

• Bank of Canada, Ottawa, Canada: Seismic Upgrade and Renovations Role: Senior Structural Engineer Project completion: In progress

• CSEC New Headquarters, Ottawa, Canada Role: Senior Structural Engineer Cost: $867 million CAD Project completio: Completed

Vibration Analysis

• Wellington Cantilever Spiral Feature Stair, Ottawa, Canada: Vibrational Analysis and Design Role: Senior Structural Engineer Project Completion: In progress


• CSEC Cantilever Spiral Feature Stair, Ottawa, Canada: Vibrational Analysis and Design Role: Senior Structural Engineer Project Completion: 2013

• Bank of Canada Feature Stair, Ottawa, Canada: Vibrational Analysis and Design Role: Senior Structural Engineer Project Completion: In progress

Seismic Evaluation and Upgrade • Canadian Embassy Renovation, Kabul, Afghanistan: Seismic

Evaluation, Upgrade, and Fit-up Role: Lead Structural Engineer Project Completion: Completed The project started with a seismic evaluation of an existing four storey building with a mixed concrete and unreinforced load-bearing masonry structure. It was followed by the design of the seismic upgrading and structural modification as required for the new occupancy. An independent Pool House building was also upgraded to resist seismic forces, and transformed into a meeting / reception hall. Both building have been designed as post-disaster buildings.

• The Rideau Shopping Centre (Sears Building), Ottawa, Canada:

Seismic Evaluation, Upgrade, and Fit-up Role: Senior Structural Engineer/Seismic Engineer Project Completion: In progress

• The Former Zeller Building Renovation, Ottawa, Canada:

Seismic Evaluation and Upgrade Role: Senior Structural Engineer/Seismic Engineer Project Completion: In progress

• Rideau Falls Power Station, Ottawa, Canada: Seismic

Evaluation Role: Senior Structural Engineer/Seismic Engineer

Seismic Peer Review • Reserve Water Tank Structure Seismic Peer Review, AECL

Role: Peer Reviewer

• Ottawa Airport Expansion, Ottawa, Canada: Seismic Peer

Review Role: Peer Reviewer

• West Block Peer Review, Ottawa, Canada

Role: Peer Reviewer

• North Bay Courthouse Building Seismic Peer Review, North

Bay, Canada Role: Peer Reviewer


AWARDS

Carleton University Senate Medal Nominee for Outstanding Ph.D. Research 2008 Author of one of the top 25 articles in Cement and Concrete Composites 2011 Author of one of the top 25 articles in Cement and Concrete Composites 2009 Iran Ministry of Science, Research and Technology National Graduate Scholarship 2000 University of Guilan - First Class Honour 1995 Iran Ministry of Science, Research and Technology National Undergraduate Scholarship 1990

SCOLARLY AND PROFESSIONAL ACTIVITIES

Member, Organizations: American Concrete Institute (ACI) 2007- Present Canadian Society for Civil Engineering (CSCE) 2007- Present Engineering Mechanics and Materials Division Secretary Professional Engineers of Ontario (PEO), Registered Professional Engineer April 2010-Present

Member, Technical Committees: ACI 555: Concrete with Recycled Materials 2008 – Present

Reviewer, Granting Agencies: Ontario Centres of Excellence Inc. (OCE) Reviewer, Journals: Journal of Cement and Concrete Composites ASCE Materials Journal ASCE Journal of Structural Engineering ACI Structural Journal ACI Materials Journal ACI Magazine of Concrete International Magazine of Concrete Research Engineering Structures Journal Construction and Building Materials Hong Kong Institution of Engineers Canadian Journal of Civil Engineers Hindawi Publishing Corporation The Journal of Structural Design of Tall and Special Buildings

RESEARCH

Research Interests

[1] Infrastructure Sustainability - Development of innovative repair and rehabilitation technologies including the application of advanced composite materials such as FRP, and prefabricated bridge decks [2] Sustainable Materials - Application of alternative sustainable construction materials, including advanced composite and recycled construction materials [3] Structural Design of Concrete Structures - Investigation of structural performance of reinforced and pre-stressed concrete structures at both service state (deflection, crack width and spacing) and ultimate state (ultimate shear, ultimate flexural behaviour, and bond performance) - Greater interfacial phenomena related to delamination of FRP and near surface mounted FRP reinforcement [4] Experimental Material Science/Mechanics - Material characterization of aggregates


- Mixture proportioning of concrete - Fresh properties of concrete - Short- and long-term characteristics of concrete (including strength, stiffness, creep, shrinkage, stress-strain relationships, carbonation, chloride attack, freeze-and-thaw action, etc.) - Investigation of the interaction between materials and structures at micro and macro levels [5] Computational Concrete Material Science/Mechanics - Development of analytical models for prediction of the physical and mechanical properties of concrete [6] Durability-based Design of Reinforced Concrete Structures - Durability mechanics; exposure-driven design; repair of deteriorated (e.g. due to corrosion) concrete structures [7] Infrastructure Security - Development of effective techniques for assessment and improvement of blast resistance of structures

Publications:

Journal Publications:

A1. Fathifazl, G. and Razaqpur, A.G. (in review). Proposed Models for Elastic Moduli of Recycled Aggregate Concrete (RAC). Cement and Concrete Composites.

A2. (Invited paper) Fathifazl, G. and Razaqpur, A.G. (in press). Macro-mechanical Models for

Creep and Elastic Modulus of Recycled Aggregate Concrete. Special Issue of Mechanics Research Communications on Workshop "Multiscale Modeling and Characterization of Innovative Materials and Structures".

A3. Fathifazl, G. and Razaqpur, A.G. (2013). Creep Rheological Models for Recycled Aggregate

Concrete. ACI Materials Journal, 110(2), pp. 115-126. A4. Fathifazl, G., Razaqpur, A.G., Isgor, O.B., Abbas, A., Fournier, B., and Foo, S. (2012). Bond

Performance of Deformed Steel Reinforcements Embedded in Concrete produced with Coarse Recycled Concrete Aggregate (RCA). Canadian Journal of Civil Engineering, 39(2), pp. 128-139.

A5. (Top 25 article) Fathifazl, G., Razaqpur, A.G., Isgor, O.B., Abbas, A., Fournier, B., and Foo,

S. (2011). Creep and Drying Shrinkage Characteristics of Concrete produced with Coarse Recycled Concrete Aggregate (RCA). Journal of Cement and Concrete Composites, 33(3), pp.1026-1037.

A6. Fathifazl, G., Razaqpur, A.G., Isgor, O.B., Abbas, A., Fournier, B., and Foo, S. (2011). Shear

Capacity Evaluation of Steel Reinforced Recycled Concrete (RRC) Beams. Engineering Structures Journal. 33(3), pp.1025-1033.

A7. Fathifazl, G., Razaqpur, A.G., Isgor, O.B., Abbas, A., Fournier, B., and Foo, S. (2010)

Proportioning Concrete Mixtures with Recycled Concrete Aggregate: A novel method. International Magazine of ACI. 32 (3), pp. 37-43.

A8. Fathifazl, G., Razaqpur, A.G., Isgor, O.B., Abbas, A., Fournier, B., and Foo, S. (2010)

Proportioning Concrete Mixtures with Recycled Concrete Aggregate: A novel method. Concrete India. 25 (1), pp. 3-8.


Strength of Steel Reinforced Recycled Concrete Beams with Stirrups. Magazine of Concrete Research, 62(10), pp. 685-699.


Strength of Steel Reinforced Recycled Concrete Beams without Stirrups. Magazine of Concrete Research, 61 (7), pp. 387-400.

A11. Fathifazl, G., Abbas, A., Razaqpur, A.G., Isgor, O.B., Fournier, B., Foo, S. (2009). New

Mixture Proportioning Method for Concrete Made with Coarse Recycled Concrete Aggregate. ASCE Materials Journal. 21 (10), pp. 601-611.


A12. Fathifazl, G., A.G., Razaqpur, Isgor, O.B., Abbas, A., Fournier, B., Foo, S. (2009). Flexural Performance of Steel Reinforced Recycled Concrete (RRC) Beams. ACI Structural Journal. 106 (6), pp. 858-867.

A13. (Invited paper, Top 25 article) Abbas, A., Fathifazl, G., Isgor, O.B., Razaqpur, A.G., Fournier,

B., Foo, S. (2009). Durability of Recycled Aggregate Concrete Designed with Equivalent Mortar Volume Method. Special Issue of the Journal of Cement and Concrete Composites on “Sustainability of Civil Engineering Structures - Durability of Concrete, 31 (8), pp. 555-563.

A14. Abbas, A., Fathifazl, G., Fournier, B., Isgor, O.B., Zavadil, R., Razaqpur, A.G., Foo, S. (2009).

Quantification of the residual mortar content in recycled concrete aggregates by image analysis. Journal of Materials Characterization, 60 (7), pp.716-728.

A15. Fathifazl, G., Abbas, A., Razaqpur, A.G., Isgor, O.B., Fournier, B., Foo, S. (2008). Recycled

aggregate concrete as a structural material. Canadian Civil Engineer, 24.5 (Winter): 20-23. A16. Abbas, A., Fathifazl, G., Isgor, O.B., Razaqpur, A.G., Fournier, B., Foo, S. (2008). Proposed

method for determining the residual mortar content of recycled concrete aggregates. Journal of ASTM International, 5 (1), 12 pp.

A17. Abbas, A., Fathifazl, G., Isgor, O.B., Razaqpur, A.G., Fournier, B., Foo, S. (in review). Effect of

residual mortar content on the material properties of recycled concrete aggregates. Journal of Cement and Concrete Composites.

Book Chapters:

B1. Razaqpur, A.G. and Fathifazl, G. (2013). Recycling in North America: State-of-the-Art of RCA-Concrete in North America. In Enric Vázquez (Editor), Progress of Recycling in the Built Environment, Final report of the RILEM Technical Committee 217-PRE (RILEM State-of-the-Art Reports Vol.8), Springer Dordrecht Heidelberg New York London, pp. 50-57.

Discussions in Journals:

C1. Fathifazl, G., Razaqpur, A.G., Isgor, O.B., Abbas, A., Fournier, B., and Foo, S. (2010). A reply to the discussion by D.K. Sahoo, B. Singh, and P. Bhargava of the paper “Shear Strength of Steel Reinforced Recycled Concrete Beams without Stirrups.” Magazine of Concrete Research, 62(11), pp. 853-856.

C2. Fathifazl, G., and Razaqpur, A.G. (2011). Discussion on “Malešev, M.; Radonjanin, V.; and

Marinković, S. Recycled Concrete as Aggregate for Structural Concrete Production. Journal of Sustainability, 2010, 2, pp.1204-1225, Journal of Sustainability, 3 (2), pp.465-468.

Papers in Refereed Conference Proceeding:

D1. Fathifazl, G., Razaqpur, A.G., (2013). Macro-mechanical Models for Creep and Elastic Modulus of Recycled Aggregate Concrete. International Workshop "Multiscale Modeling and Characterization of Innovative Materials and Structures", Cetara Amalfi Coast, Italy,May 1-5 2013.

D2. (Invited paper, keynote address by A G Razaqpur) Razaqpur, A.G., Fathifazl, G., Isgor,

O.B., Abbas, A., Fournier, B., Foo, S. (2010). How to produce high quality concrete mixes with recycled concrete aggregate (RCA). International RILEM Conference Proceedings: 2nd International Conference on Waste Engineering and Management - ICWEM 2010, pp.13 – 15.

D3. Fathifazl, G., Razaqpur, A.G., Isgor, O.B., Abbas, A., Fournier, B., Foo, S. (2010). Evaluation

of flexural and shear performance of reinforced concrete beams made with recycled concrete aggregates. Second International Conference on Sustainable Construction Materials and Technologies, 28 – 30 June 2010, Ancona, Italy.

D4. Razaqpur, A.G., Fathifazl, G., Isgor, O.B., Abbas, A., Fournier, B., Foo, S. (2009). Effect of

Mixture Proportioning Method on Creep and Shrinkage of RCA Concrete. 4th International


Conference on Construction Materials: Performance, Innovations and Structural Implications (CanMat ’09). 24-26 August 2009, Nagoya, Japan.

D5. Fathifazl, G., Razaqpur, A.G., Isgor, O.B., Abbas, A., Fournier, B., Foo, S. (2008). A Rational

Approach to the Design and Production of High Quality Concrete Mixes Made with Recycled Concrete Aggregates. International Conference on Waste Engineering and Management, 28 – 30 May 2008, Hong Kong (on CD).

D6. Abbas, A., Fathifazl, G., Isgor, O.B., Razaqpur, A.G., Fournier, B., Foo, S. (2008). Durability of

recycled aggregate concrete designed with equivalent mortar volume (EMV) method. 2nd Canadian Conference on Effective Design of Structures, 20–23 May 2008, McMaster University, Hamilton ON, Canada.

D7. Fathifazl, G., Razaqpur, A.G., Isgor, O.B., Abbas, A., Fournier, B., Foo, S. (2008). Flexural

performance of reinforced recycled concrete beams. 2nd Canadian Conference on Effective Design of Structures, 20–23 May 2008, McMaster University, Hamilton ON, Canada.

D8. Fathifazl, G., Razaqpur, A.G., Isgor, O.B., Abbas, A., Fournier, B., Foo, S. (2008). Fresh and

hardened properties of recycled aggregate concrete proportioned by the equivalent mortar volume (EMV) method. 2nd Canadian Conference on Effective Design of Structures, 20–23 May 2008, McMaster University, Hamilton ON, Canada.

D9. Fathifazl, G., Razaqpur, A.G., Isgor, O.B., Abbas, A., Fournier, B., Foo, S. (2008). The key to

the design and production of high quality structural-grade recycled aggregate concrete. 2008 Concrete Technology Forum: Focus on Sustainable Development, 20-22 May 2008, Denver, CO, USA.

D10. Abbas, A., Fathifazl, G., Isgor, O.B., Razaqpur, A.G., Fournier, B., Foo, S. (2007).

Qualification of recycled concrete aggregates for use in structural-grade concrete. 2007 International on Conference on Sustainable Construction Materials and Technologies, Coventry, U.K. (on CD)

D11. Fathifazl, G., Abbas, A., Razaqpur, A.G., Isgor, O.B., Fournier, B., Foo, S. (2007). Proposed

mix design procedure for recycled aggregate concrete. 2007 International on Conference on Sustainable Construction Materials and Technologies, Coventry, U.K. (on CD)

D12. Abbas, Fathifazl, G., A., Fournier, B., Isgor, O.B., Zavadil, R., Razaqpur, A.G., Foo, S. (2007).

Quantification of the residual mortar content in recycled concrete aggregates by image analysis. 11th Euroseminar on Microscopy Applied to Building Materials, EMABM 2007, Portugal. (on CD)

D13. Abbas, A., Isgor, O.B., Razaqpur, A.G., Fournier, B., Fathifazl, G., Foo, S. (2006). Proposed

method for determining the residual mortar content of recycled concrete aggregates. 2006 CSCE Structural Specialty Conference, Calgary AB, Canada. (on CD)

D14. Abbas, A., Fathifazl, G., Isgor, O.B., Razaqpur, A.G., Fournier, B., Foo, S. (2006).

Environmental Benefits of Green Concrete. 2006 CCC: Climate Change Conference, Ottawa ON, Canada. (on CD)

Papers in Abstract-Reviewed Conference Proceeding: E1. Abbas, A., Fathifazl G., Isgor, O.B., Razaqpur, A.G., Fournier, B., Foo, S. (2007). Durability of

green concrete. Proceedings of Annual Conference of the Canadian Society for Civil Engineering 2007: Where the Road Ends, Ingenuity Begins, Vol.2, Yellowknife, Northwest Territories, Canada, pp. 970-976.

Submitted Projects to Refereed Competitions: F1. Fathifazl, G., Abbas, A., Razaqpur, A.G., Isgor, O.B., Fournier, B., Foo, S. (2008).

“Standardization of use of RCA as a structural-grade concrete”. 2008 Holcim Awards Competition for Sustainable Construction.


Non-refereed Workshop/Forum Presentations: G1. Fathifazl, G., Razaqpur, A.G. (2006). Rational Design of Concrete Mixes Made with Recycled

aggregate Concrete. Cement Association of Canada 1st University Graduate Level Cement & Concrete R & D Exchange Forum, University of Toronto, Toronto, Ontario, Canada.

G2. Abbas, A., Fathifazl, G., Fournier, B., Isgor, O.B., Razaqpur, A.G., Foo, S. (2007). Utilisation

des granulats de béton recyclé pour la fabrication de nouveaux bétons. Colloque Progrès dans le domaine du béton, 5-6 décembre 2007. Boucherville (Québec). ACI Chapitre du Québec et de l’est de l’Ontario.

Journal Publications (in process): H1. Fathifazl, G., Razaqpur, A.G., Isgor, O.B., Abbas, A., Fournier, B., and Foo, S. The

Interrelations between Mechanical Properties of Recycled Aggregate Concrete (RAC). Other Publications: I1. Fathifazl, G. (2008). Structural performance of steel reinforced recycled concrete members.

Ph.D. Thesis, Department of Civil and Environmental Engineering, Carleton University, Canada, pp. 465.

I2. Fathifazl, G. (2002). Nonlinear Analysis and Behaviour of Steel I-shaped Girders Curved in

Plan. M.Sc. Thesis, Department of Civil Engineering, Iran University of Science and Technology (IUST), Iran, pp. 120.

TEACHING INTERESTS

Over eight years of experience as a senior engineer in structural design, seismic upgrade, rehabilitation and renovation of several residential, commercial, recreational, heritage and specialty projects (international and nationwide), as well as six years of experience as a field engineer, has provided Dr. Fathifazl with valuable skills and insights into some of the problems currently facing engineering education. Therefore, Dr. Fathifazl is fully prepared to teach the following wide range of undergraduate and graduate courses: [1] Reinforced and Pre-stressed Concrete Design [2] Advanced Reinforced Concrete Structures [3] Structural Analysis [4] Mechanics of Solids [5] Application of Underutilized Materials in Structures [6] Material Science of Civil Engineering Materials [7] Cement and Concrete Technology [8] Earthquake Resistant Design of Structures

TEACHING EXPERIENCE

Course # Course Title Term No. of

Students PA Lab

CIVE3202 Mechanics of Solids II 2012/13W 111 Yes Yes CIVE4302 Reinforced and Prestressed Concrete Design 2012/13F 44 Yes No CIVE3202 Mechanics of Solids II 2013/14W 153 Yes Yes CIVE4302 Reinforced and Prestressed Concrete Design 2013/14F 47 Yes No CIVE3206 Reinforced Concrete I 2014/15W 184 Yes Yes CIVE4302 Reinforced and Prestressed Concrete Design 2014/15F 62 Yes No

[1] Mechanics of Solids II [2] Reinforced and Prestressed Concrete Design [3] Reinforced Concrete I

gholamreza fathifazl, ph.d., p.eng. - carleton …wellington building is a designated heritage...

Documents