powered by

Get larger jobs done faster.Specialist in material removal: Additional products to use with the Total Automotive Sanding System.

Festool Automotive Systems Tools

30001 Compressed Air Eccentric Sander LEX 2 185/7

30002 Soft Sanding Pad, ST-STF-D185/16-M8 W

30003 Super Soft Sanding Pad, ST-STF-D185/16-M8 SW

30005 IAS Hose 3-Light 10000 AS

Part no.

3M™ Abrasives and Accessories

34790 Cubitron™ II Clean Sanding Hookit™ Disc, 185mm, 40+

34791 Cubitron™ II Clean Sanding Hookit™ Disc, 185mm, 80+

34792 Cubitron™ II Clean Sanding Hookit™ Disc, 185mm, 120+

34793 Cubitron™ II Clean Sanding Hookit™ Disc, 185mm, 150+

34794 Cubitron™ II Clean Sanding Hookit™ Disc, 185mm, 180+

34795 Cubitron™ II Clean Sanding Hookit™ Disc, 185mm, 220+

77225 Scotch-Brite™ Clean and Finish Disc, 6" x NH T

Part no.

Automotive Aftermarket Division3M Center, Building 223-6N-01St. Paul, MN 55144-1000

www.3Mcollision.com/Festool3M, Cubitron, Hookit, Perfect-It, Scotch-Brite and Trizact are trademarks of 3M Company.

Please recycle. Printed in U.S.A. © 3M 2018. All rights reserved. 60-4402-7972-1 Issued 2/18

The Total Automotive Sanding System is engineered to support the ongoing need for cleaner, safer, more efficient and profitable shops.

Profitability + efficiency

• Reduces the amount of dust in the air from sanding, leading to less rework, driving improved cycle time and process efficiency.

• Reduces cleanup time.• Enhances workplace efficiency by reducing time spent searching

for tools and materials.• Workcenter enables the use of abrasives to end of life, leading to

reduced material spend.• Increases technician mobility.

The Total Automotive Sanding System incorporates the benefits of 3M high performing abrasives, such as:

• 3M™ Cubitron™ II abrasives that cut 30% faster and last up to twice as long as other premium abrasives.

• 3M™ Trizact™ abrasives that leave a finer, more uniform finish. • 3M™ Perfect-It™ Paint Finishing System, designed to provide

a fast, swirl-free finish every time.

Health + safety

• Designed with the technician’s safety in mind. • Integrated dust extraction system reduces dust. • IAS anti-static green and black hoses. • Ergonomic, non-slip tool design. • Pad brake means less tool free spin. • Improves shop cleanliness. 

Before using any of the listed products, it is important to read all applicable product user instructions and warnings for health and safety information. Misuse or failure to follow instructions or warnings may result in serious injury or death. Note: the Festool mobile dust extractor is not approved for use with aluminum dust. 

Warranty, Disclaimer & User Responsibility:User is responsible for evaluating the product and determining whether it is appropriate and suitable for user’s application(s), including conducting a workplace hazard assessment and review of any regulations applicable in your location. 3M and Festool Products are warranted to be free of defects in material and workmanship. Unless an additional warranty is specifically stated on the applicable product packaging or literature, or provided as part of Festool’s Service all-inclusive (see related terms), no further warranty is provided, express or implied. SERVICE all-inclusive applies to Festool products only. ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR ANY IMPLIED WARRANTY ARISING OUT OF A COURSE OF DEALING, TRADE OR CUSTOM IS EXPRESSLY DISCLAIMED.

Respiratory Products

These respirators help protect against certain airborne contaminants. Before use, the wearer must read and understand the User Instructions provided as a part of the product packaging. A written respiratory protection program must be implemented meeting all the requirements of OSHA 1910.134 including, but not limited to, training, fit testing and medical evaluation. In Canada, CSA standards Z94.4 requirements must be met and/or requirements of the applicable jurisdiction, as appropriate. Misuse may result in sickness or death. For proper use, see packaging instructions, supervisor, or call 3M PSD Technical Service in the USA at 800-243-4630. In Canada, call Technical Service at 800-267-4414.