get article pro documentationget article pro documentation ... showing the whole process using...
TRANSCRIPT
Get Article Pro Documentation
Table of Contents Installation ..................................................................................................................................................... 2
Get Article Pro User Interface ....................................................................................................................... 2
Get Article Pro Directories ............................................................................................................................ 4
Get Article Pro Settings ................................................................................................................................. 6
Get Article Pro Help Menu .......................................................................................................................... 10
Spinner ........................................................................................................................................................ 12
Batch Spinner .............................................................................................................................................. 15
Blog Poster .................................................................................................................................................. 18
Batch Blog Poster ........................................................................................................................................ 21
Blog settings ................................................................................................................................................ 24
Content Mixer ............................................................................................................................................. 26
Batch Article Creator ................................................................................................................................... 28
Translator .................................................................................................................................................... 32
Batch Translator .......................................................................................................................................... 34
Meta Scraper ............................................................................................................................................... 36
Link Adder.................................................................................................................................................... 37
Link Creator ................................................................................................................................................. 39
Keyword adder ............................................................................................................................................ 41
Spintaxer...................................................................................................................................................... 44
SpinnerChief ................................................................................................................................................ 47
Batch SpinnerChief ...................................................................................................................................... 51
File Joiner .................................................................................................................................................... 56
Videos .......................................................................................................................................................... 58
Tips and tricks .............................................................................................................................................. 58
Technical Support ........................................................................................................................................ 58
Installation
There is no installation process with Get Article Pro. All you need to do is extract all files from the archive “GAP.ZIP” to some folder and run “Get Article.exe” after that. Here’s a video and another one showing the whole process using WinRar (the steps are similar with other archive programs as well).
Get Article Pro User Interface
1) Import keywords – Pressing it will open a new file dialog to select existing file and read it’s contents to the keywords textbox(8).
2) Used keywords – Pressing it will open a new form showing you keywords you have already scraped(if any)
3) Import proxies – Pressing it will open a new file dialog to select existing file and read it’s contents to the proxies textbox(10)
4) Start button – Pressing it will start scraping articles based on your keyword(s)
5) Stop button – Pressing it will stop article scraping process. 6) Textbox showing the current path where scraped articles will
be saved. 7) Browse button – Pressing it will open a new folder dialog to
select folder where articles will be saved to. 8) Keywords textbox – Keywords are entered here. 9) Use proxy checkbox – When checked it will all scraping will be
done using proxies in the list(10). 10) Proxies textbox – Proxies are entered here. 11) Article counter – Shows the number of articles scraped. 12) Timer – Shows the elapsed time after the scraping has
begun.
Get Article Pro Directories
1) Select all PR7 – Pressing it will select all PR7 directories. 2) Select all PR6 – Pressing it will select all PR6 directories. 3) Select all PR5 – Pressing it will select all PR5 directories. 4) Select all PR4 – Pressing it will select all PR4 directories. 5) Select all PR3 – Pressing it will select all PR3 directories. 6) Select all PR2 – Pressing it will select all PR2 directories. 7) Select All – Pressing it will select all directories regardless of PR. 8) Deselect All – Pressing it will deselect all directories.
9) OK button – Pressing it will close the form and confirm directory selection.
Get Article Pro Settings
1) Search only in title – Checking it will make sure that all scraped articles will have your keyword in their title.
2) Search only in content – Checking it will make sure that all scraped articles will have your keyword in their content.
3) Search both in title and content – Checking it will make sure that all scraped articles will have your keyword both in their title and content.
4) Minimum length checkbox – Checking it will allow to set minimum words length for every scraped article.
5) Maximum length checkbox – Checking it will allow to set maximum words length for every scraped article.
6) Number of threads - Set how many threads to be used when scraping.
7) Sleep between threads – Set how many seconds to wait before a new thread is started when old thread is finished.
8) Timeout - Set how long a thread runs before it times out(in seconds). Also this is maximum amount of seconds it could take to stop a thread.
9) Maximum articles for site – Set the maximum number of articles to scrape from each directory.
10) Don’t create folder for each keyword – When checked new folders for keywords will be no longer created.
11) Include title in file – When checked it will place the article title on top of the file contents.
12) Append directory to filename – When checked scraped articles will be named “directory_article”(e.g. ezine_acaiberry.txt).
13) Append words count in filename – When checked words count will be added to the article filenames(e.g. acaiberry_413.txt).
14) Include article url – When checked it will place the article URL on the bottom of the file contents.
15) Save as HTML – When checked articles will be saved in HTML format instead of TXT.
16) Save as XLSX – When checked articles will be saved in Excel Spreadsheets format instead of TXT.
17) Remove links, leave anchors – Remove any links from articles, but don't remove the anchor.
18) Remove links + anchors – Remove any links from articles.
19) Replace link anchors with keyword – Remove any links and replace the anchor with the current keyword.
20) Allow duplicate articles – When checked it allows articles which have the same titles to be saved(e.g. acaiberry.txt,acaiberry_1.txt).
21) All articles to one file – When checked all articles will be saved to one file instead of separate files.
22) Show keyword status bar - When checked it will show in the main window the current keyword which is being scraped.
23) Scrape only titles - When checked it will scrape only the titles of the articles without their content. By default the option "All articles to one file" will be used unless unchecked.
24) Sort addons – Addons menu will show addons in alphabetical order instead of the default one.
Get Article Pro Help Menu
1) Check for update – Clicking it will check if a new update is available. If the file "update.exe" is not present, error will be shown.
2) View Changelog – Shows the changelog.
3) Contact Us – Clicking it will open a browser and go to contact form.
4) Documentation – Clicking it will open a browser and navigate to the documentation file.
5) FAQ – Clicking it will open a browser and go to FAQ page.
6) Videos – Clicking it will open a browser and go to YouTube where there are videos showing the various features of the program.
7) Shows current build version.
Spinner
1) Your The Best Spinner username. 2) Your The Best Spinner password. 3) Number of synonyms to identify per word. 4) Quality of the synonyms. 5) Exclude words from operations identify synonyms/rewrite text/
replace favorites 6) Tests your credentials. 7) Load article for spinning. 8) Save spinned article.
9) Identify Synonyms
Input: Losing weight can be a difficult thing to do.
Output: {Losing weight|Reducing your weight|Slimming down|Shedding pounds} {can be a|can be quite a|is usually a|could be a} difficult {thing to do|move to make|activity|action to take}.
10) Replace Favorites
Input: Losing weight can be a difficult thing to do
Output: {Losing|Dropping} {weight|pounds|fat} can be a {difficult|hard|tough} {thing|point|factor} to do.
11) Rewrite Text
Input: Modern diets can be dangerous, so be careful.
Output: Modern diets could be harmful, so be cautious
12) Random Spin
Input: {Losing|Dropping} {weight|pounds|fat} can be a {difficult|hard|tough} {thing|point|factor} to do.
Output: Dropping pounds can be a hard thing to do
13) Get Uniqueness
Input1: These two strings contain some duplicate content text.
Input2: These two strings have some duplicate content in them.
Output: 40%
14) Compare Text
Input1: These two strings contain some duplicate content text.
Input2: These two strings have some duplicate content in them.
Output1: MATCH{These two strings} contain MATCH{some duplicate content} text. Output2: MATCH{These two strings} have MATCH{some duplicate content} in them.
15) Move input text to output textbox. 16) Move output text to input textbox.
Batch Spinner
1) Your The Best Spinner username.
2) Your The Best Spinner password.
3) Number of synonyms to identify per word.
4) Quality of the synonyms.
5) Exclude words from operations identify synonyms/rewrite text/replace favorites
6) Tests your credentials.
7) Load files for spinning.
8) Load files from multiple folders for spinning.
9) Identify Synonyms
Input: Losing weight can be a difficult thing to do.
Output: {Losing weight|Reducing your weight|Slimming down|Shedding pounds} {can be a|can be quite a|is usually a|could be a} difficult {thing to do|move to make|activity|action to take}.
10) Replace Favorites
Input: Losing weight can be a difficult thing to do
Output: {Losing|Dropping} {weight|pounds|fat} can be a {difficult|hard|tough} {thing|point|factor} to do.
11) Rewrite Articles
Input: Modern diets can be dangerous, so be careful.
Output: Modern diets could be harmful, so be cautious
12) Random Spin
Input: {Losing|Dropping} {weight|pounds|fat} can be a {difficult|hard|tough} {thing|point|factor} to do.
Output: Dropping pounds can be a hard thing to do
13) Articles waiting for spinning.
14) Removes all articles waiting for spinning.
15) Moves all articles from input to output.
16) Removes all spinned articles.
17) Moves all articles from output to input.
18) Spinned articles will be shown here. Spinned articles will be saved to a subfolder “spinned” in the articles directory (c:\Articles\fitness\spinned).
Blog Poster
1) The address of your blog. The blog must have XML-RPC enabled. Valid urls are
http://myblog.com
http://myblog.com/xmlrpc.php
myblog.com
myblog.com/xmlrpc.php
2) Your blog username.
3) Your blog password.
4) Clears blog/username/password fields.
5) Loads previously saved credentials file.
6) Saves current blog/user/password credentials to a file.
7) Pressing the button, will download list of the blog categories. This is required before posting a article to your blog.
8) Blog categories will be shown here.
9) Title for the new post.
10) Tags for the new post. To use multiple tags, separate them with comma.
11) Load article for posting.
12) Clears post title, post tags, article text.
13) Preview how the article will look when posted.
14) Post article to blog. If the article includes spintax, it will be automatically spun and posted.
15) Post article to blog, but keep spintax if there is any.
16) Contents of the article.
17) Date when the post will be posted. If the date is in the past, then the article will appear with the past date. If the date is in the future, the article is scheduled for posting on that date.
18) Time when the post will be posted. By default the poster uses UTC +0 time, so if your blog is set in a different time zone, there will be +/- difference in the time when the post is published.
Batch Blog Poster
1) The address of your blog. The blog must have XML-RPC enabled. Valid urls are
http://myblog.com
http://myblog.com/xmlrpc.php
myblog.com
myblog.com/xmlrpc.php
2) Your blog username.
3) Your blog password.
4) Clears blog/username/password fields.
5) Loads previously saved credentials file.
6) Saves current blog/user/password credentials to a file.
7) Pressing the button, will download list of the blog categories. This is required before posting a article to your blog.
8) Blog categories will be shown here.
9) Load article for posting.
10) Load article from multiple folders for posting.
11) Clears articles list. If there are any selected articles, only they will be removed.
12) Checks all articles as spintax and they'll not be spinned. If the articles are already checked, they’ll be checked.
13) Adds tags to all articles. Multiple tags are separated by comma.
14) Add random date/time for all articles based on start date and end date.
15) Preview how the selected article will look when posted.
16) Post article to blog. If the article includes spintax and the spintax checkbox is not checked, it will be automatically spun and posted.
17) Spintax column includes a checkbox to indicate whether the article should be automatically spun before posting.
18) Title column shows the title of the article.
19) Tags column shows the tags for the article.
20) Date when the post will be posted. If the date is in the past, then the article will appear with the past date. If the date is in the future, the article is scheduled for posting on that date.
21) Time when the post will be posted. By default the poster uses UTC +0 time.
22) Start date to use when "random schedule" button is used.
23) End date to use when "random schedule" button is used.
Blog settings
In order to post your articles to your blog(s) you need to have XML-RPC protocol enabled. This is done by going to the Settings->Writing in the admin panel of the blog.
Default time zone for blog poster and batch blog poster is UTC +0. That means if your blog time zone is different the articles will be posted either a hour(s) earlier or later. The time zone can be changed from Settings->General in the admin panel of the blog. There is a video showing the blog settings here.
Content Mixer
1) Select article files for mixing. 2) Select files and search them for a specific string. When the string
is found, the sentence which contains it will be shown in the results window and you can add the results to the new article.
3) Shows all sentences for each article selected. 4) Shows only the first sentence for each article selected. 5) Shows a random sentence for each selected article selected. 6) Shows only the longest sentence for each selected article. 7) Shows all paragraphs for each article selected. 8) Shows only the first paragraph for each article selected. 9) Shows a random paragraph for each selected article. 10) Shows only the longest paragraph for each selected article. 11) Add the selected sentence/paragraph to the article. 12) Delete the selected sentence/paragraph. 13) Deletes all sentences/paragraphs. 14) Previews selected sentence/paragraph. 15) Search sentences/paragraphs for a string. When the string is
found, the sentence/paragraph which contains it will be shown in the results window and you can add those results.
16) Move up the selected sentence/paragraph. 17) Move down the selected sentence/paragraph. 18) Add a new paragraph. 19) Delete selected sentence/paragraph. 20) Delete all sentences/paragraphs. 21) Preview & edit the selected sentence/paragraph. 22) Preview & edit the whole article. 23) Save the newly created article.
Batch Article Creator
1) Select files - Opens a new dialog window to select files to use. 2) Select folders - Opens a new dialog window to select folders to
use. 3) Batch create - Creates the selected number of articles using the
selected options.
4) Use 1st sentence - Only the first sentence from each article is going to be used when creating new articles.
5) Use 1st paragraph - Only the first paragraph from each article is going to be used when creating new articles.
6) Use longest sentence - Only the longest sentence from each article is going to be used when creating new articles.
7) Use longest paragraph - Only the longest paragraph from each article is going to be used when creating new articles.
8) Use random sentences - The new articles will contain random sentences (this can include first/longest sentence).
9) Use random paragraphs - The new articles will contain random paragraphs (this can include first/longest paragraph).
10) # Sentences - Number of sentences for the new articles. This can be either a static number or random. The format for random number is X-Y where X is the start number and Y is the end number (e.g. 15-30 it will choose randomly between 15 and 30 and use that number for sentences)
11) # Paragraphs - Number of paragraphs for the new articles. This can be either a static number or random. The format for random number is X-Y where X is the start number and Y is the end number (e.g. 15-30 it will choose randomly between 15 and 30 and use that number for paragraphs)
12) # Articles - Exact number of new articles. 13) Min words - Minimum number of words for the new articles.
If a article does not meet the criteria it's not added to the list. 14) Max words - Maximum number of words for the new
articles. Best way to use is, to set the # sentences/paragraphs to 99, and when the articles reaches the desired amount of words,
it'll be added, otherwise if you set 20 sentences and the article words are way lower than the desired amount, it'll still be added. It's possible to generate articles with amount of words greater than the desired, because the algorithm performs this check: (max words - current words count) < 15 This means if the article has currently 480 words and you've set maximum 500 (500 – 480 is 20 which is bigger than 15) it'll add another sentence/paragraph and there is a chance that the article will have over 500 words.
15) Only uniques - Each sentence/paragraph will be used only once and after that it's removed from the pool of sentences/paragraphs. If the option is not used, a sentence/paragraph can be used more than once in the articles.
16) Min words sentences - Minimum number of words for a sentence. If the sentence has lower words count it's not added to the pool.
17) Max words sentences - Maximum number of words for a sentence. If the sentence has greater words count it's not added to the pool.
18) Insert new paragraph after # sentences - How many sentences to use before starting a new paragraph. This option greatly increases readability of the articles.
19) # sentences for paragraph start - This can be either a static number or random. The format for random number is X-Y where X is the start number and Y is the end number (e.g. 3-6 it will choose randomly between 3 and 6 and when that number of sentences is reached, a new paragraph will start)
20) Min words paragraphs - Minimum number of words for a paragraph. If the paragraph has lower words count it's not added to the pool.
21) Max words paragraphs - Maximum number of words for a paragraph. If the paragraphs has greater words count it's not added to the pool.
22) Use titles – If the scraped articles have titles, those titles will be used in the newly created articles.
23) Deletes selected article. 24) Deletes all created articles. 25) Previews in a new window the selected article. 26) Saves created articles in TXT format. 27) Saves created articles in HTML or TXT format, but replaces
new lines with "<br>".
Translator
1) Load article for translation. 2) Translate article to selected language. 3) Save translated article. 4) Input language for the article. It’s best to leave it to autodetect. 5) Output language for the translated article. 6) API Key required by Microsoft Translator. If you don’t have one,
click on “Get Free API Key” link to get one. 7) Move translated article to the textbox above.
Batch Translator
1) Input language for the article. It’s best to leave it to autodetect.
2) Output language for the translated article.
3) API Key required by Microsoft Translator. If you don’t have one, click on “Get Free API Key” link to get one.
4) Load articles for translation.
4) Load articles from multiple folders for translation.
6) Start translation process.
7) Loaded articles will show here.
8) Translated articles will show here. Translated articles will be saved in a subfolder “translated” in the articles directory (c:\Articles\fitness\translated).
Meta Scraper
1) URL Column – Urls will be shown here. 2) Title Column – Site titles will be shown here. 3) Keywords Column – Site keywords will be shown here. 4) Description Column – Site description will be shown here. 5) Load list of urls for scraping. 6) Number of threads to use for scraping. 7) Clear the loaded urls list. 8) Start scraping loaded urls. 9) Stop scraping process. 10) Save the results to CSV file.
Link Adder
1) Select articles for link inserting.
2) Select articles from multiple folders for link inserting.
3) Clear selected articles.
4) Import links for inserting. The links can be in either in GAP format(url||keyword) or standard <a href="url">anchor</a> type.
5) Paste links for inserting. The links can be in either in GAP format(url||keyword) or standard <a href="url">anchor</a> type.
6) Clear loaded links.
7) Open Link Creator dialog.
8) Set how many links to insert in each article.
9) If checked when a link is inserted it is removed from the list. If the links list gets empty before the articles list, the process will stop.
10) If the anchor is in spintax, the anchor will not be spun.
11) If checked the link will be inserted replacing the random word. The default behavior is to insert the link after the random word.
12) Use stop words – When checked only stop words (am, an, you, do, of, etc) will be used for link inserting.
13) Start link inserting process. The new articles are saved in a subfolder "links" in the articles folder (c:\Articles\acai\links).
Link Creator
1) Load urls for link creation. Urls have to be in format "http://url.com".
2) Load keywords for link creation.
3) Create links with the given urls and keywords. If GAP format is not used, then the link will look like "<a href="http://url">keyword</a>".
4) Save created links in GAP format "url||keyword". This option must be checked if the keywords contains spintax.
5) If option is checked then every url will be combined with every keyword. Default behavior is like this: loaded 30 urls and 50 keywords => result is 30 links like url||keyword, url2||keyword2,etc. When checked the result will be 30x50 => 1500 links and every link is combined with every keyword.
6) If option is checked then used links will be removed from the list.
7) Loaded urls will be shown here.
8) Loaded keywords will be shown here.
Keyword adder
1) Type here the keyword(s) you want added to the articles. The keyword(s) can be anything from regular text to html code.
2) Keyword(s) will be inserted on random locations in the articles.
3) Keyword(s) will be inserted only in the beginning of the text. Beginning of text is considered from 1% to 50% of the whole text.
4) Keyword(s) will be inserted only in the middle of the text. Middle of text is considered from 30% to 75% of the whole text.
5) Keyword(s) will be inserted only at the end of the text. End of text is considered from 75% onwards of the whole text.
6) Number of times the keyword will appear in the articles.
7) Instead of using a static number the keyword will be inserted at the selected keyword density. Minimum density is 0.1% and maximum is 10%.
8) Insert all – All keywords will be inserted at selected frequency.
9) Before start of text – Keyword will be inserted before the beginning of the text.
10) After end of text – Keyword will be inserted after the text’s end.
11) The articles with the keyword inserted will be saved in TXT format.
12) The articles with the keyword inserted will be saved in HTML format, meaning new lines will be replaced with "<br>".
13) Instead of saving the files to a new folder "keyword" they will be overwritten.
14) Loads articles for keyword inserting.
15) Loads articles from multiple folders for keyword inserting.
16) Preview a sample article (the sample is not from the loaded articles) showing how many times the keyword(s) will be inserted and highlight the keyword in yellow color.
17) Start keyword(s) inserting process. If "Overwrite files" is not checked the new articles will be saved in a subfolder "keyword" in the articles folder (C:\Articles\fitness\keyword).
Spintaxer
1) Load files for spintaxing.
2) Load files from multiple folders for spintaxing.
3) Clears created articles list.
4) Spintax the loaded articles with the selected options.
5) Save all created articles. Saved files will be named like filename_1.txt, filename_2.txt,etc where filename is the initial name you've entered in the save file dialog.
6) Use only sentences for spintaxing.
7) # of sentences for each article - This can be either a static number or random. The format for random number is X-Y where X is the start number and Y is the end number (e.g. 25-50 it will choose randomly between 25 and 50 and use that number of sentences for the new article)
8) Minimum words for a sentence. If the sentence has a lower number of words than the chosen limit then it won't be added to the pool.
9) Maximum words for a sentence. If the sentence has a greater number of words than the chosen limit then it won't be added to the pool.
10) Use only paragraphs for spintaxing.
11) # of paragraphs for each article - This can be either a static number or random. The format for random number is X-Y where X is the start number and Y is the end number (e.g. 5-10 it will choose randomly between 5 and 10 and use that number of paragraphs for the new article)
12) Minimum words for a paragraph. If the paragraph has a lower number of words than the chosen limit then it won't be added to the pool.
13) Maximum words for a paragraph. If the paragraph has a greater number of words than the chosen limit then it won't be added to the pool.
14) How many sentences/paragraphs each {} will have. Minimum is 2 and maximum is 20. The bigger the number the longer it will take to create each article.
15) When checked it will start a new paragraph when the chosen number of sentences are added. It's strongly recommended to use this option to improve readability of the new articles. The option is only available for sentences. This can be either a static number or random. The format for random number is X-Y where X is the start number and Y is the end number (e.g. 3-6 it will choose randomly between 3 and 6 and when that number of sentences is reached, a new paragraph will start)
16) Number of articles to create. The bigger the number the more time it will take to create the articles.
17) Each sentence/paragraph will be used only once and after that it's removed from the pool of sentences/paragraphs. If the option is not used, a sentence/paragraph can be used more than once in the articles. This option will increase the time needed to create the new articles.
SpinnerChief
1) Address of the server. The server is always the same, but the ports used are different. This is useful if you're behind a firewall and you're not allowed to open certain ports.
2) Loads article for spinning.
3) SpinnerChief account name. If you already own SpinnerChief then your username/password won't be good here. You'll have to create a separate account by clicking on "Get a FREE Account Now" link.
4) SpinnerChief account password.
5) Clears username/password fields.
6) Loads previously saved username/password.
7) Save current username/password.
8) Test your username/password if they are valid.
9) When spintype is 0, SpinnerChief will return the spun article in {} format.
Input: This is a great software.
Output: {It|This} {is|must be} a {good|nice} {software|program}.
When spintype is 1, SpinnerChief will return the spun article directly.
Input: This is a great software.
Output: It is a nice program.
10) The spinfreq means word spin frequency, for example if spinfreq is 1 then every word will be spun, if spinfreq is3, 1/3 of all words will be spun, etc.
11) Quality of the used synonyms. Different value will use different theaurus:
0 - Use "Best Thesaurus"
1 - Use "Better Thesaurus"
2 - Use "Good Thesaurus"
3 - Use "All Thesaurus"
9 - Use "Everyone's favorite"
12) When autospin is 0, SpinnerChief will not spin the words in your article without the {} format.
Input: {It|This} is a good software.
Output: It is a good software.
When autospin is 1, SpinnerChief will auto-spin the words in your article without the {} format.
Input: {It|This} is a good software.
Output: This is a great program.
13) How many synonyms to return in the {} brackets.
14) When value is "No" server will keep the original words in the spun article, and when value is "Yes" the server will delete the original word in the return result.
15) When checked the server uses the thesaurus randomly to spin. If not checked, the server uses the thesaurus in its listed order to spin.
16) If there are any words entered here, they will not be spinned. Multiple words/phrases are separated by comma.
17) When checked content hurricane will be used. More information about this can be found on http://www.contenthurricane.com
18) When checked the server the server will still spin the words in html tags in your article. If not checked the server will not spin the words in the html tags in your article.
19) If your article contains special or non-unicode chars then change the option to the respective value. This option will only work when "Integrate CH features" is not checked.
20) When value is 0 then the server will still spin the {} part within html tags in your article. If value is 1 the server will not spin the {} part within html tags in your article.
21) When value is 0 then the server will convert based on char. If the value is then server will convert based on word. This option will only work when "Integrate CH features" is not checked.
22) When value is 0 then don’t use “Only Convert One Char for every word” function. If value is 1 then use “Only Convert One Char for every word” function. This option will only work when "Integrate CH features" is not checked.
23) The value of conversion rate in percentages.
Batch SpinnerChief
1) Address of the server. The server is always the same, but the ports used are different. This is useful if you're behind a firewall and you're not allowed to open certain ports.
2) SpinnerChief account name. If you already own SpinnerChief then your username/password won't be good here. You'll have to create a separate account by clicking on "Get a FREE Account Now" link.
3) SpinnerChief account password.
4) Clears username/password fields.
5) Loads previously saved username/password.
6) Save current username/password.
7) Test your username/password if they are valid.
8) When spintype is 0, SpinnerChief will return the spun article in {} format.
Input: This is a great software.
Output: {It|This} {is|must be} a {good|nice} {software|program}.
When spintype is 1, SpinnerChief will return the spun article directly.
Input: This is a great software.
Output: It is a nice program.
9) The spinfreq means word spin frequency, for example if spinfreq is 1 then every word will be spun, if spinfreq is3, 1/3 of all words will be spun, etc.
10) Quality of the used synonyms. Different value will use different theaurus:
0 - Use "Best Thesaurus"
1 - Use "Better Thesaurus"
2 - Use "Good Thesaurus"
3 - Use "All Thesaurus"
9 - Use "Everyone's favorite"
11) When autospin is 0, SpinnerChief will not spin the words in your article without the {} format.
Input: {It|This} is a good software.
Output: It is a good software.
When autospin is 1, SpinnerChief will auto-spin the words in your article without the {} format.
Input: {It|This} is a good software.
Output: This is a great program.
12) How many synonyms to return in the {} brackets.
13) When value is "No" server will keep the original words in the spun article, and when value is "Yes" the server will delete the original word in the return result.
14) When checked the server uses the thesaurus randomly to spin. If not checked, the server uses the thesaurus in its listed order to spin.
15) If there are any words entered here, they will not be spinned. Multiple words/phrases are separated by comma.
16) When checked content hurricane will be used. More information about this can be found on http://www.contenthurricane.com
17) When checked the server the server will still spin the words in html tags in your article. If not checked the server will not spin the words in the html tags in your article.
18) If your article contains special or non-unicode chars then change the option to the respective value. This option will only work when "Integrate CH features" is not checked.
19) When value is 0 then the server will still spin the {} part within html tags in your article. If value is 1 the server will not spin the {} part within html tags in your article.
20) When value is 0 then the server will convert based on char. If the value is then server will convert based on word. This option will only work when "Integrate CH features" is not checked.
21) When value is 0 then don’t use “Only Convert One Char for every word” function. If value is 1 then use “Only Convert One Char for every word” function. This option will only work when "Integrate CH features" is not checked.
22) The value of conversion rate in percentages.
23) Loaded articles will be shown here.
24) Clears the loaded articles list.
25) Moves the loaded articles to the output list.
26) Clears the spinner articles list.
27) Moves the spinned articles to the input list.
28) The spinned articles will be shown here. Spinned articles will be saved to a subfolder “spinned” in the articles directory (c:\Articles\fitness\spinned).
File Joiner
1) Don’t spin - When checked the files will not spinned (keep {} format) when joined.
2) Use Spintax - When checked the output result will be {article1|article2|article3|article4|etc}. If not checked output result is
Article 1
Article 2
Article 3
The separator between the articles is 2 line breaks.
3) Load files – Load multiple files for joining.
4) Load folders – Load multiple files from folders for joining.
5) Clear - Clears the loaded files list.
6) Join + Save – Begin joining the files and select a output file.
Videos
Videos showing the usage of the different add-ons can be found here.
Tips and tricks
1) If you are not using proxies then it is recommended to set some “sleep between threads” between 15 and 45 seconds and set low threads number like 10. This way article directories(especially Ezine and GoArticles) will not block your IP temporary from accessing the site.
2) To get more relevant articles use the option “Search both in title and content” and also use quotes for searches “keyword”.
3) The SpinnerChief API documentation is not as clear as The Best Spinner’s so if some option is not so descriptive, it’s best to try it.
4) When using the Spintaxer, you can double-click on any article and get a idea how the article will look once spinned and how many words it will have.
Technical Support
If you have a technical issue/bug/suggestion don’t hesitate to shoot a e-mail to [email protected].