MODEL ZTM-34/22N MEASUREMENTS US Metric

Working height maximum* 40 ft 6 in 12.52 m Platform height maximum 34 ft 6 in 10.52 m Horizontal reach maximum 22 ft 3 in 6.78 m Up and over clearance - at platform

at jib 15 ft 3 in 15 ft2 in

4.65 m 4.62m

()Platform length 2 ft 6 in .76 m ()Platform width 4 ft8 in 1.42 m (1) Height - stowed 6 ft 7 in 2.00 m Cl Length - stowed 18 ft 9 in 5.72 m CO Storage height 7 ft 5 in 2.26 m ()Storage length 13 ft9 in 4.19 m OWidth 4 ftlOin 1.47 m OWheelbase 6 ft 2 in 1.88 m 0 Ground clearance - center 5.5 in .14 m

RANGE OF MOTION r"-34/22N 45ft

13.72 m

40ft 12.19 m

355 10.67 m

30 ft 9.14 m

25ft 7.62 m

20ft 6.10 m

15ft 4.57 m

10ft 3.05 m

5ft 1.52 m

Oft Om

-5ft Oft 5ft 10ft 15ft 20ft 25ft -1.52m 0m 1.52m 3.05m 4.57m 6.10m 7.62m

SELF-PROPELLED ARTICULATING BOOMS

r-34/22N Canto A TEREX COMPANY

Specifications

PRODUCTIVITY

Lift capacity 500 lbs 227 kg Platform rotation 180° Vertical jib rotation 139° Turntable rotation 355° non-continuous Turntable tailswing zero Drive speed - stowed Drive speed - raised"*

4.0 mph 0.68 mph

6.4 km/h 1.1 km/h

Gradeability - stowed 35% Turning radius - inside Turning radius - outside

7 ft 13 ft 5 in

2.13 m 4.08 m

Controls 24V DC proportional lires (solid rubber, non-marking, treaded) 22 x 7 x 17.75 in .56 x .18 x .45 m

Power source Auxiliary power unit Hydraulic tank capacity

48V DC (eight 6 V batteries 315 Ah capacity) 24V DC 4 gal

15.1 L

11,400 lbs 5,171 kg

STANDARDS COMPLIANCE ANSI A92.5, CSA B354.4, CE Compliance, AS 1418.10, PB-10-611-03

*The metric equivalent of working height adds 2 m to platform height. U.S. adds 6 ft to platform height. ** In lift mode (platform raised), the machine is designed to operate on fimi, level surfaces only. ***Gradeability applies to driving on slopes. See operator's manual for details regarding slope ratings.

****Weight wil' vary depending on options and/or country standards.

www.genieindustries.com Z34N 3.5K 0107F. Part No.109358

www.eurosupply.net