A product of

GENESIS Development Board

Genesis is a development tool that is designed keeping the needs of an embedded professional in mind. The tool features various peripherals on-board like Graphic LCD, USB, SD card, Ethernet, etc. Optionally, the user can expand the available peripherals with Add-Ons for meeting a wide variety of project requirements. Genesis is compatible with Plug-Ins that supports various microcontroller architectures like AVR, ARM, PIC and 8051. All peripherals available on-board can be used with any of the mentioned microcontroller architecture by simply replacing the Plug-In. Each Genesis compatible Plug-In comes with demos and source codes for all on-board peripherals to help you getting started.

A product of

Regulated Power Supply

Analog Input 36 LEDs and 36 Push Buttons

16x2 Character LCD operable in 4-bit or 8-bit mode 128x64 Graphic LCD

Buzzer

EEPROM and RTC with battery backup

RS232 Interface PS/2 Keyboard Interface

Digital Temperature Sensor

USB Seven Segment Display SD Card Ethernet

Support for various Controller Architectures like PIC, AVR, 8051 and ARM

A product of

Plug 51 supports NXP and Atmel’s 40-pin 8051 core microcontrollers. The microcontroller is programmable using the Serial boot-loader1

PIC Plug40 supports all 40 pin variants

of PIC18 and PIC16 controllers1.

AVR Plug40 supports AVR MCUs which are pin compatible with AtMega321 AVR MCUs.

Package Contents · Genesis development board. · A comprehensive User Manual with all the section of the development board explained with schematics. · Product CD-ROM with demo codes and complete source code for all the peripherals and additional

material for getting started with microcontrollers. The CD-ROM also includes complete and evaluation versions of different development environments.

· A USB cable of type B-to-A, for connecting the development board to a USB host. · A modem serial cable, DB9-Male to DB9-Female (DB9M-DB9F). · CAT-5 Ethernet cable, RJ45-Male to RJ45-Male. · A Digital Temperature Sensor (DS18S20) #. · 12V AC/DC adapter as external power supply#. · Character LCD, Graphic LCD#, Resistive Touch Screen#.

# Optional

1. Check Data-sheet for complete list

A product of

Key Features 1. Plug-Ins covering a variety of

controller families like 8051, ARM, AVR and PIC.

2. Three variable analog inputs using potentiometers.

3. On-board buzzer to generate various audio frequencies.

4. On-board Real Time Clock with battery backup.

5. On-board EEPROM. 6. Wireless connectivity with on-board

connector for XBee devices. 7. Two DB9 connectors to implement RS232 communication with selectable TX, RX, CTS and RTS. 8. A power jack for an external power supply from 9 to 12V AC/DC. Alternatively the board can be

powered through USB. 9. On-board USB connector to communicate over USB. 10. On-board 1-wire temperature sensor with 0.5°C accuracy between -10°C to +85°C. 11. On-board PS/2 connector to interface Keyboard or Mouse with your MCU. 12. On-Board Ethernet connector and standalone Ethernet controller with SPI interface. 13. SD/MMC Card slot for additional memory requirements. 14. 36 on-board LEDs to display status of every port pin. User also has an option to connect or disconnect

LEDs to individual ports. 15. 36 Push Buttons to control input to every port pin. User has an option to configure input from button

as active-high or active-low. 16. Graphic LCD interface to display graphics and text. 17. Resistive Touch Screen with four wire interface. 18. Character LCD interface with user selectable 4-bit or 8-bit mode. 19. Individual potentiometers to vary contrast of Graphic LCD and Character LCD. 20. Four multiplexed seven segment displays with an option to enable or disable them individually. 21. Well-documented top and bottom side for easy hardware debugging. 22. Sample programs with source code for each peripheral are provided with every Plug-In.

Visit us at www.entesla.com For business proposals or any other queries contact@entesla.com