general purpose laminar flow cabinets, 24 • 36 • 48 • 60...
TRANSCRIPT
General Purpose Laminar Flow Cabinets, Horizontal and Vertical
“The World’s Most Practical Selection of Benchtop Laminar Flow Cabinets.”
—VLF-48
24 • 36 • 48 • 60 • 72 • 96
Provides reliable protection for samples and work processes for a multitude of applications.
This Product Exceeds OSHA, ANSI and Other International Standards.
p:2 Product FeaturesGeneral Purpose Laminar Flow Cabinets,
Horizontal and Vertical24 • 36 • 48 •60 • 72 • 96
Product Overview
INTRODUCTION
Air Science Purair Laminar Flow
cabinets are a series of high effi-
ciency products designed to protect
equipment and other contents of
the work zone from particulates,
for applications sensitive to such
contamination. It is ideally suited for
use with non-hazardous contaminants
and when flexible access to the
equipment in the work zone is desired.
At the heart of the Purair Laminar Flow
cabinet product line is the Air Science
Multiplex™ ULPA Filtration Technology
that creates a clean work environment
over a wide range of applications.
Excellent protection of equipment and materials inside the cabinet from particulate contamination.
Rich set of options to customize cabinets for a multitude of applications.
Easy to change filters.
High airflow capacity.
Choose from standard powder coated interior or stainless steel interior (-SS models).
Purair VLF cabinets provide vertical airflow and are available in 2', 3', 4', 5', 6' and 8' widths for general applications.
Purair HLF cabinets provide horizontal airflow and are available in 2', 3', 4', 5', 6' and 8' widths in standard and extra tall heights for general applications.
APPLICATIONSUses include applications where there is no genera-tion of biohazardous materials and operator protection is not required:
• Mycology and food microbiology
• Plant and mammalian cell culture
• Clinical pharmacy and hospital use
• Clean rooms
• Semiconductor assembly
• Pharmaceutical
• Aerospace
• Medical device assembly
• Research Laboratories
HLF-72; shown with optional mobile base stand.
Purair General Application Laminar Flow Cabinet Group
STERILE COMPOUNDING COMPLIANTWhen used according to best practices, the LF Series cabinet encour-ages compliance with criteria set forth by USP 797 for sterile prepa-ration in pharmaceutical compounding of non-hazardous agents.
These include inject-ables, IV admixtures, pastes and ointments and irrigating solutions which are protected by filtered air over the work surface in a laminar flow.
JUMP TO:Features and Callouts (p.3)
Airflow and Filtration (p.4)
Specifications (p.5)
Options, Accessories and Standards (p.8)
Made in the U.S.A.
Air Science® 120 6th Street • Fort Myers, FL 33907 • T/239.489.0024 • Toll Free/800.306.0656 • F/800.306.0677 • www.airscience.com
p:3 Product Features Product FeaturesGeneral Purpose Laminar Flow Cabinets,
Horizontal and Vertical24 • 36 • 48 •60 • 72 • 96
PRODUCT FEATURES: A. Cabinet lighting located away from laminar flow area.
B. Optional ultraviolet lamp to sterilize and decon-taminate work zone and cabinet contents between operating periods.
C. Optional Night Door/Cover to protect cabinet interior when blowers are off. Contains UV radiation when UV activated.
D. Disposable polyester fiber pre-filter with 85% arrestance.
E. Long-life Camfil-Farr ULPA main filter with efficiency of 99.999% at particle sizes between 0.1 to 0.3 μm.
F. Side window that allows ambient illumination into the chamber and provides users with an unob-structed view of its contents from three sides. Side windows not available on stainless steel models.
G. GFCI outlet to power equipment in cabinet.
H. ebmpapst™ external rotor blower.
I. Control panel On/Off switch for fan, lighting, GFCI outlets, Minihelic ULPA pressure gauge to measure filter performance, UV lamp key switch.
J. Fan speed control.
K. Base Stand: Optional mobile cart with locking casters, includes a convenient lower shelf.
L. Stainless steel work surface with ULPA filter spill-retention lip on HLF units.
M. Ergonomically angled front improves reach and comfort.
N. MICROgone™ antimicrobial coating on all painted metal surfaces minimizes contamination – white color.
O. Protected work zone environment created for optimum product performance.
P. Optional IV Bar with "S" hooks.
Q. Optional petcock service fixture (Maximum 4 per unit).
VLF-48, shown with optional mobile base stand and other selected options.
Control panel On/Off switch for fan, lighting, GFCI outlets, Minihelic ULPA pressure gauge to measure filter perfor-mance, UV lamp key switch.
A
F
K
D
N
L
O
I
J
H
B
Q
C
G
E
M P
This Product Exceeds OSHA, ANSI and Other International Standards.
p:4 Product FeaturesGeneral Purpose Laminar Flow Cabinets,
Horizontal and Vertical24 • 36 • 48 •60 • 72 • 96
Product Filtration
Purair Laminar Flow Cabinets maintain a 0.35-0.45 m/s (70-90 fpm) airflow velocity, measured 6"/150 mm from the filter with a uniformity of +/- 20% across the filter face. This face velocity is in compliance with USA and international standards for safety and performance. The ULPA filters are easy to replace with common tools.
Room air enters from the top of the cabinet through a disposable pre-filter; this traps larger particles and increases filter life.
Air is forced evenly across the ULPA filter in a stream of clean, uniform air within the work zone. This dilutes and flushes airborne contaminants from the interior.
A nominal filter face velocity of 0.35-0.45 m/s (70-90 fpm) ensures a sufficient number of air changes to maintain cleanliness within the work zone.
The purified air travels across the work zone in a horizontal, unidirectional stream and exits the work zone across the entire open cabinet front.
Rear wall perforations to reduce work
surface turbulence
PURAIR VERTICAL AIRFLOW PATTERN
ULPA Filter
Exhaust Air
Room air enters from the top of the cabinet through a disposable pre-filter; this traps larger particles and increases filter life.
Air is forced evenly across the ULPA filter in a stream of clean, uniform air within the work zone. This dilutes and flushes airborne contaminants from the interior.
A nominal filter face velocity of 0.35-0.45 m/s (70-90 fpm) ensures a sufficient number of air changes to maintain cleanliness within the work zone.
The purified air travels down to the work zone in a vertical, unidirectional downflow stream, exiting the work zone across the entire open cabinet front area after deflecting off the work surface. Rear wall perforations are designed to reduce work surface turbulence and minimize the possibility of dead air corners in the work zone.
PURAIR HORIZONTAL AIRFLOW PATTERN
Room Air Intake
Pre-Filter
Fan / Blower
ULPA Filter
Exhaust Air
Room Air Intake
Pre-Filter
Fan / Blower
THE AIR SCIENCE PERFORMANCE ADVANTAGEEach Air Science Purair Laminar Flow cabinet includes features expressed through sound design and certi-fied quality construction. Options and accessories add functional perfor-mance to meet specific applications.
Professional Quality. Air Science cabinets comply with current technical and safety regulations.
Advanced Filtration. Air Science Multiplex™ ULPA Filtration provides high performance protection.
Industrial Components. The cabinet frame and work surfaces are durable and chemically resistant for long service life.
All cabinet compo-nents are clean room compatible.
Each cabinet is indi-vidually factory tested for safety and performance in accordance with international standards.
The main filter gasket evenly seals the filter face to prevent bypass air leakage. Our pour-in-place silicone gasket out performs traditional style stick-on "dove-tail" gasketing.
VERTICAL AND HORI-ZONTAL AIRFLOW: Performance of Purair vertical and horizontal flow cabinets is the same and the choice is largely a matter of user preference.• Horizontal flow cabinets
create less turbulence at the work surface, as the airflow does not directly impinge upon it but rather is smoothly drawn across it. The airflow on the Purair vertical flow cabinets directly strikes the work surface. However, to minimize this effect, vertical laminar flow cabinets are manu-factured with rear wall perforations to reduce turbulence by remov-ing a small amount of air at the rear of the cabinet. Turbulence is a problem only when it is excessive.
• The design of verti-cal flow cabinets is customized more easily (at a lower cost) as required.
• Airflow in a horizontal flow cabinet exits directly towards the user, whereas the airflow in a vertical flow cabinet strikes the work surface first and exits towards the user indirectly. It should be noted, neither style laminar flow cabinet offers any operator protection.
• Large or tall equip-ment in a horizontal flow cabinet will inter-rupt the airflow more than in a vertical flow cabinet. This may create more turbu-lence and “dead” spots where airflow is lower than elsewhere. Vertical flow cabinets are not so impacted by large equipment.
• In vertical flow cabinets, the ULPA filter is mounted above the work surface. This provides a larger work space, both taller and deeper, that may be appropriate for large equipment in the work zone.
Air Science® 120 6th Street • Fort Myers, FL 33907 • T/239.489.0024 • Toll Free/800.306.0656 • F/800.306.0677 • www.airscience.com
p:5 Product FeaturesGeneral Purpose Laminar Flow Cabinets,
Horizontal and Vertical24 • 36 • 48 •60 • 72 • 96
Product Features & Specifications
MODEL DIMENSIONS WEIGHT (lbs/Kg)
Metal Interior Stainless Interior Nominal Width Internal Height Internal Depth External (W x D x H) Shipping (W x D x H) Net Ship
Vertical Laminar Flow Cabinets
VLF-24 VLF-24-SS24"
610 mm24"
610 mm28.25"
718 mm28.4" x 29.25" x 47.25"721 x 743 x 1200 mm
40" x 44" x 54"1016 x 1118 x 1372 mm
181 / 82 288 / 131
VLF-36 VLF-36-SS36"
914 mm28.25"
718 mm28.25"
718 mm40.4" x 29.25" x 47.25" 1026 x 743 x 1200 mm
45" x 44" x 54" 1143 x 1118 x 1372 mm
268 / 122 371 / 168
VLF-48 VLF-48-SS48"
1219 mm28.25"
718 mm28.25"
718 mm52.4" x 29.25" x 47.25" 1331 x 743 x 1200 mm
60" x 44" x 54" 1524 x 1118 x 1372 mm
322 / 146 478 / 217
VLF-60 VLF-60-SS60"
1524 mm28.25"
718 mm28.25"
718 mm64.4" x 29.25" x 47.25"1636 x 743 x 1200 mm
70" x 44" x 54"1778 x 1118 x 1372 mm
401 / 182 525 / 238
VLF-72 VLF-72-SS72"
1829 mm28.25"
718 mm28.25"
718 mm76.4" x 29.25" x 47.25" 1941 x 743 x 1200 mm
91" x 44" x 54" 2311 x 1118 x 1372 mm
478 / 217 595 / 270
VLF-96 VLF-96-SS96"
2438 mm28.25"
718 mm28.25"
718 mm100.4" x 29.25" x 47.25"2550 x 743 x 1200 mm
110" x 44" x 54"2794 x 1118 x 1372 mm
620 / 281 745 / 338
Specifications are subject to change without notice.
VLF-36VLF-24 VLF-48 VLF-60 VLF-72 VLF-96 VLF (side view)
PURAIR LAMINAR FLOW CABINET FEATURES & BENEFITS • Purair Laminar Flow
cabinets are available in 2 model types with various sizes and options for a total of 18 standard models.
• Choose from standard powder coated inte-rior or stainless steel interior (-SS models).
• Purair Laminar Flow Cabinets are shipped fully assembled. No installation is required; just plug them in and use them.
• Products are designed for desktop use, or may be installed on an optional mobile base stand.
• The rear wall of verti-cal flow cabinets is perforated to reduce work surface turbu-lence by removing some of the airflow to the rear.
• Horizontal flow cabi-nets are designed with a lip on the rear of the work surface to protect the ULPA filter from spills.
• High capacity air handling system delivers flow velocity of 0.35-0.45 m/s (70-90 fpm).
• Purair VLF and HLF cabinets have an ULPA filter pressure gauge to measure filter performance.
• The Air Science filters are easy to access, easy to change.
• Purair Laminar Flow products are con-structed of steel with Air Science’s exclusive MICROgone™ anti-microbial powder finish coating.
Accessories include an IV bar, service fixtures, base stand, UV lamp, and front door/cover.
VLF-60-SS, stainless steel interior, shown with optional mobile base stand; see specifications.
Air Science® 120 6th Street • Fort Myers, FL 33907 • T/239.489.0024 • Toll Free/800.306.0656 • F/800.306.0677 • www.airscience.com
p:6 Product Specifications Product FeaturesGeneral Purpose Laminar Flow Cabinets,
Horizontal and Vertical24 • 36 • 48 •60 • 72 • 96
HLF-36XTHLF-24XT HLF-48XT HLF-60XT HLF-72XT HLF-96XT HLF-XT (side view)
MODEL DIMENSIONS WEIGHT (lbs/Kg)
Metal Interior Stainless Interior Nominal Width Internal Height Internal Depth External (W x D x H) Shipping (W x D x H) Net Ship
Horizontal Laminar Flow Cabinets with Extra Tall Option
HLF-24XT HLF-24XT-SS24"
610 mm29.5"
749 mm23.75"
603 mm25.25" x 29.5" x 48.75"641 x 749 x 1238 mm
40" x 44" x 60"1016 x 1118 x 1524 mm
191 / 87 295 / 134
HLF-36XT HLF-36XT-SS36"
914 mm29.5"
749 mm23.75"
603 mm37.25" x 29.5" x 48.75" 946 x 749 x 1238 mm
45" x 44" x 60" 1143 x 1118 x 1524 mm
266 / 121 391 / 177
HLF-48XT HLF-48XT-SS48"
1219 mm29.5"
749 mm23.75"
603 mm49.25" x 29.5" x 48.75" 1251 x 749 x 1238 mm
60" x 44" x 60" 1524 x 1118 x 1524 mm
319 / 145 508 / 230
HLF-60XT HLF-60XT-SS60"
1524 mm29.5"
749 mm23.75"
603 mm61.25" x 29.5" x 48.75"1556 x 749 x 1238 mm
70" x 44" x 60"1778 x 1118 x 1524 mm
375 / 170 525 / 238
HLF-72XT HLF-72XT-SS72"
1829 mm29.5"
749 mm23.75"
603 mm73.25" x 29.5" x 48.75" 1861 x 749 x 1238 mm
91" x 44" x 60" 2311 x 1118 x 1524 mm
479 / 217 635 / 288
HLF-96XT HLF-96XT-SS96"
2438 mm29.5"
749 mm23.75"
603 mm98.5" x 29.5" x 48.75"
2502 x 749 x 1238 mm110" x 44" x 60"
2794 x 1118 x 1524 mm585 / 265 746 / 338
Specifications are subject to change without notice.
MODEL DIMENSIONS WEIGHT (lbs/Kg)
Metal Interior Stainless Interior Nominal Width Internal Height Internal Depth External (W x D x H) Shipping (W x D x H) Net Ship
Horizontal Laminar Flow Cabinets
HLF-24 HLF-24-SS24"
610 mm23.75"
603 mm23.75"
603 mm25.25" x 29.5" x 42.75"641 x 749 x 1086 mm
40" x 44" x 54"1016 x 1118 x 1372 mm
170 / 77 280 / 127
HLF-36 HLF-36-SS36"
914 mm23.75"
603 mm23.75"
603 mm37.25" x 29.5" x 42.75" 946 x 749 x 1086 mm
45" x 44" x 54" 1143 x 1118 x 1372 mm
246 / 112 371 / 168
HLF-48 HLF-48-SS48"
1219 mm23.75"
603 mm23.75"
603 mm49.25" x 29.5" x 42.75" 1251 x 749 x 1086 mm
60" x 44" x 54" 1524 x 1118 x 1372 mm
289 / 131 478 / 217
HLF-60 HLF-60-SS60"
1524 mm23.75"
603 mm23.75"
603 mm61.25" x 29.5" x 42.75"1556 x 749 x 1086 mm
70" x 44" x 54"1778 x 1118 x 1372 mm
344 / 156 494 / 224
HLF-72 HLF-72-SS72"
1829 mm23.75"
603 mm23.75"
603 mm73.25" x 29.5" x 42.75" 1861 x 749 x 1086 mm
91" x 44" x 54" 2311 x 1118 x 1372 mm
439 / 199 595 / 270
HLF-96 HLF-96-SS96"
2438 mm23.75"
603 mm23.75"
603 mm98.5" x 29.5" x 42.75"
2502 x 749 x 1086 mm110" x 44" x 54"
2794 x 1118 x 1372 mm878 / 398 725 / 329
Specifications are subject to change without notice.
HLF-36HLF-24 HLF-48 HLF-60 HLF-72 HLF-96 HLF (side view)
This Product Exceeds OSHA, ANSI and Other International Standards.
p:7 Product FeaturesGeneral Purpose Laminar Flow Cabinets,
Horizontal and Vertical24 • 36 • 48 •60 • 72 • 96
Product Specifications
PRODUCT SPECIFICATIONSAirflow Pattern Vertical Horizontal
Air Science Model
VLF-24 | VLF-36VLF-48 | VLF-60 VLF-72 | VLF-96
HLF-24 | HLF-36 HLF-48 | HLF-60 HLF-72 | HLF-96
HLF-24XT | HLF-36XT HLF-48XT | HLF-60XT
HLF-96XT HLF-72XT
Airflow1 0.45 m/s (90 fpm) 0.35 m/s (70 fpm)
Filter SpecificationsPre-Filter <… Disposable polyester fibers with 85% arrestance …>
Main Filter2 <… ULPA, 99.999% efficient at particle sizes between 0.1 to 0.3 μm …>
Size <… Full size of Work Zone …>
Clamping <… Spring loaded, adjustable tension adjusts for gasket aging …>
Cabinet Lighting <… Compact fluorescent bulb removed from air stream …>
UV Lamp3 Optional
Noise, dBA, 1 meter ≤72
Side Windows (Not Available on Stainless Steel Models)
Construction Tempered Glass
Visible Opacity Transparent
UV Opacity UV Absorbing
Color Colorless
ConstructionColor <… White epoxy coated steel frame …>
Work Surface Stainless Steel
GFCI outlet Standard
Finish (exterior) <… MICROgone™ antimicrobial coating …>
Finish (interior) <… Standard models, MICROgone antimicrobial coating. -SS models, stainless steel interior. …>
Other FeaturesNight Door/Cover Optional
Blower <… ebmpapst™ external rotor motor, permanently lubricated, low noise and vibration levels …>
Electrical<… 120V, 60Hz or 220V, 50Hz voltages available. Specify when ordering.
Other voltage options available. …>
Electrical Controls<… Main On/Off Switch; Solid State Fan Speed Control with RFI filter;
UV Timer and Key Switch if included …>
Monitoring <… Minihelic ULPA pressure gauge …>
Warranty Legacy Lifetime
1 Average airflow measured 6"/150 mm from filter face. Uniformity is +/- 20%.2 Camfil-Farr filters; ULPA efficiency: 99.999% at particle sizes between 0.1 to 0.3 μm3 UV Lamp includes Timer and Key Switch
Purair Laminar Flow cabi-nets maintain a 0.35-0.45 m/s (70-90 fpm) airflow velocity, measured 6"/150 mm from the filter with a uniformity of +/- 20% across the filter face. This face velocity is in compliance with USA and international standards for safety and performance. The ULPA filters are easy to replace with common tools.
Air Science Laminar Flow cabinets incorporate ebmpapst™ permanently lubricated direct drive centrifugal blowers. The energy efficient design reduces operating costs and has extremely low noise and vibration levels.
120 6th Street • Fort Myers, FL 33907T/239.489.0024 • Toll Free/800.306.0656 • F/800.306.0677www.airscience.com
©2015 Air Science OW 10792 11/15 Air Science, Purair, Multiplex, and EFT are all registered trademarks of Air Science Corporation.
p:8 Product Options Product FeaturesGeneral Purpose Laminar Flow Cabinets,
Horizontal and Vertical24 • 36 • 48 •60 • 72 • 96
STANDARDS AND COMPLIANCEQuality Management Systems
ISO 9001:2008
Environmental Management Systems
ISO 14001:2004EnergyStar Partner
Cabinet Performance IEST-RP-CC002.2AS 2252.6
Air Quality ISO 14644-1, Class 3
Sterile Compounding USP 797
Filtration IEST-RP-CC034.1IEST-RP-CC001.3 IEST-RP-CC007.1 EN 1822
Electrical Safety UL-C-61010-1CE Mark ROHS Exempt under EEE Category 9
OPTIONS & ACCESSORIES
Vertical Horizontal Horizontal, Tall
Air Science Model
VLF-24 | VLF-36VLF-48 | VLF-60 VLF-72 | VLF-96
HLF-24 | HLF-36 HLF-48 | HLF-60 HLF-72 | HLF-96
HLF-24XT | HLF-36XT HLF-48XT | HLF-60XT HLF-72XT | HLF-96XT
Mobile Base Stand-Wheels
Floor-standing base for cabinet with locking castors 860 mm (34") height.
VLF-BW-24 | VLF-BW-36 VLF-BW-48 | VLF-BW-60 VLF-BW-72 | VLF-BW-96
HLF-BW-24 | HLF-BW-36 HLF-BW-48 | HLF-BW-60 HLF-BW-72 | HLF-BW-96
HLF-BW-24XT | HLF-BW-36XT HLF-BW-48XT | HLF-BW-60XT HLF-BW-72XT | HLF-BW-96XT
Mobile Base Stand-Leveling Feet
Floor-standing base for cabinet with leveling feet 860 mm (34") height.
VLF-BL-24 | VLF-BL-36 VLF-BL-48 | VLF-BL-60 VLF-BL-72 | VLF-BL-96
HLF-BL-24 | HLF-BL-36 HLF-BL-48 | HLF-BL-60 HLF-BL-72 | HLF-BL-96
HLF-BL-24XT | HLF-BL-36XT HLF-BL-48XT | HLF-BL-60XT HLF-BL-72XT | HLF-BL-96XT
Mobile Base Stand-Motorized
Floor-standing base for cabinet with motorized height adjustment. Specify locking castors or leveling feet.
VLF-BM-24 | VLF-BM-36 VLF-BM-48 | VLF-BM-60 VLF-BM-72 | VLF-BM-96
HLF-BM-24 | HLF-BM-36 HLF-BM-48 | HLF-BM-60 HLF-BM-72 | HLF-BM-96
HLF-BM-24XT | HLF-BM-36XT HLF-BM-48XT | HLF-BM-60XT HLF-BM-72XT | HLF-BM-96XT
IV Bar and “S” Hooks
Interior bar spanning the width of the cabinet to hang IV bags and other equipment using “S” hooks.Retrofit Kit.
IV-VLF-24 | IV-VLF-36 IV-VLF-48 | IV-VLF-60 IV-VLF-72 | IV-VLF-96
IV-HLF-24 | IV-HLF-36 IV-HLF-48 | IV-HLF-60IV-HLF-72 | IV-HLF-96
IV-HLF-24XT | IV-HLF-36XT IV-HLF-48XT | IV-HLF-60XT IV-HLF-72XT | IV-HLF-96XT
Service Fixtures Sidewall mounting for service fixture. Available for petcocks, faucets and valves. Retrofit Kit. Maximum of 4 per cabinet.
SF SF SF
UV lamp with Night Door/Cover*
Ultraviolet lamp for decontamination of interior surfaces. Includes a timer, and key switch UV operation must comply with local codes and facility safety practices. Contact your facility safety officer for details. Includes door/cover of UV absorbing polycarbonate plastic. Includes electrical interlock for blower, if present.
UV-24 | UV-36 UV-48 | UV-60 UV-72 | UV-96
UV-24 | UV-36 UV-48 | UV-60 UV-72 | UV-96
UV-24XT | UV-36XT UV-48XT | UV-60XT UV-72XT | UV-96XT
Ionization Bar Generates a continuous flow of positive and negative ions balanced to neutralize surface static charges and to protect sensitive work product.
ION-24 | ION-36 ION-48 | ION-60 ION-72 | ION-96
ION-24 | ION-36 ION-48 | ION-60 ION-72 | ION-96
ION-24XT | ION-36XT ION-48XT | ION-60XT ION-72XT | ION-96XT
Static Dissipative Work Surface
Work surface composite resists and dissipates static charges to protect sensitive work product.
SDW-24 | SDW-36 SDW-48 | SDW-60 SDW-72 | SDW-96
SDW-24 | SDW-36 SDW-48 | SDW-60 SDW-72 | SDW-96
SDW-24XT | SDW-36XT SDW-48XT | SDW-60XT SDW-72XT | SDW-96XT
*Sold together; safety precautions must be followed.
Legacy Lifetime Warranty ProtectionThis product is protected by the Air Science® Legacy Lifetime Warranty™ which starts on the date of shipment from our factory. This limited warranty is the result of thousands of successful Air Science production applications in phar-maceutical, laboratory, forensic, industrial and educational applications. This warranty covers defects in materials and workmanship. Our liability under the Legacy Lifetime Warranty is, at our option, to repair or replace any defective parts of this equipment if you document that these parts were defective at the time we sold the product to you. Normal conditions apply.
For details visit the Service section of our website at www.airscience.com.
PCR Laminar Flow Cabinets “The World’s Most Practical Selection of Benchtop PCR Cabinets.”
Provides Contaminant-Free Interior for PCR Applications and Protects Against Cross-Contamination
Meets or Exceeds OSHA, ANSI and other International Standards
24 • 36 • 48
— Purair® PCR-24
This Product Exceeds OSHA, ANSI and Other International Standards.
p:2 Product Overview PCR Laminar Flow Cabinets 24 • 36 • 48
PCR Laminar Flow Cabinets
Excellent interior protection from particulate contamination.
Multiple options for customized applications.
Easy-to-change HEPA filtration.
Vertical laminar airflow.
Powerful built-in UV lamp.
Choose from 2', 3' or 4' models.
Purair PCR-36, shown with UV lamp on and optional mobile base.
APPLICATIONSThese cabinets are intended for use in non-hazardous applications where biological or biohazard byproducts are not generated and user protection is not required.
• PCR Laboratories• Forensics• Pharmaceutical• Sample Preparation• General Research
INTRODUCTION
The Purair PCR laminar flow cabinet
employs the Air Science Multiplex™
HEPA filtration technology to create a
safe, energy-efficient contaminant-free
environment. It is ideally suited for use
with non-hazardous contaminants
and when flexible access to the instru-
mentation in the cabinet is required.
PCR WORKSTATIONPolymerase chain reaction1 (PCR) is a simple and inexpensive technique to make multiple copies of a targeted nucleotide sequence from a DNA sample, and to amplify sequences from small samples. This technique is widely used in genetics laboratories that work with DNA and RNA.
Because PCR amplifica-tion is extremely sensitive to contamination, prevention of contam-ination requires good laboratory practices to minimize external or cross-contamination during reagent preparation, sample preparation and sample amplification.
CONVENIENCE AND CONSTRUCTION BENEFITS• Purair PCR cabinets
are available in three model sizes with various options.
• Cabinets are shipped fully assembled with standard power cords; no installation required.
• The integral UV lamp fixtures are pre-installed.
• All filters are pre-installed, easy to access and change.
• Products are designed for desktop use, or may be installed on an optional base stand or mobile cart.
• The high capacity air handling system delivers flow velocity of 0.45 m/s (90 fpm).
• Purair® PCR cabinets are constructed of steel with a microbial powder finish coating.
The optional stainless steel work surface includes lips on all four sides to contain spills.
1 Polymerase chain reaction (PCR) is a patented process owned by Hoffman La Roche.
JUMP TO:Features and Callouts (p.3)
Airflow and Multiplex™ Filtration Technology (p.4)
Specifications (p.5)
Options and Accessories (p.6)
Air Science® 120 6th Street • Fort Myers, FL 33907 • T/239.489.0024 • Toll Free/800.306.0656 • F/800.306.0677 • www.airscience.com
p:3 Product Features PCR Laminar Flow Cabinets 24 • 36 • 48
PRODUCT FEATURES: A. Task Lighting: Fluorescent cabinet lamp located away from laminar flow area.
B. Ultraviolet Lighting: Built-in ultraviolet lamp with timer permits decontamination between PCR cycles. Includes a double-flap safety cover of 0.2" (5 mm) UV absorbing 254 nm beta radiation resistant polycarbonate; provides superior operator protection while allowing easy access to the work zone. Timer can be set over range of 0 to 60 minutes or set to HOLD.
C. Comfort: Ergonomically angled front improves reach and user comfort.
D. Decontamination Shelf: Mounted on the back wall is proximate to the UV lamp for maximum exposure.
E. Filter: Camfil Farr main HEPA filter with 99.99% efficiency for 0.3 micron particulates. The pre-filter can be changed while the unit is operating to prevent operator exposure to chemical vapors.
F. Pass Through Ports: Convenient rear-wall pass through ports for safe routing of instrument cords, cables and leads.
G. Double-Hinged Self-Locking Front Sash: With overlap closed, the cabinet sash protects samples on the work surface from contamination with 100 fpm airflow. The sash completely closes unit off when not in use and is easy to open and latch.
H. Fan: High-performance ebmpapst™ centrifugal fan.
I. Stand: Optional base stand converts to mobile cart with optional locking casters.
J. Work Surface: Large polypropylene work surface, white or black standard, with optional stainless steel work surface available.
K. Filter Door Lock: Prevents unauthorized removal or accidental exposure to dirty filters.
L. Magnetic Door Latch: Safety interlock prevents accidental operator exposure when door is opened.
OTHER FEATURES:360 Degree Visibility: Clear back and side panels allow ambient illumination into the chamber and provide users with an unobstructed view of its contents.
Standards Compliant: Performance specifications and construction meet or exceed OSHA, ANSI and relevant international standards to assure operator safety.
Construction: All models are available in either metal or polypropylene construction, specify when ordering. Available in 120V, 60Hz or 220V, 50Hz models.
Steel Support Frame: The chemical resistant epoxy coated steel frame adds mechanical strength. Optional all polypropylene construction is available if desired.
Purair PCR-24, shown with optional mobile cart.
The integrated control panel features an On/Off switch for the fan, light and UV lamp timer.
This Product Exceeds OSHA, ANSI and Other International Standards.
p:4 Product Filtration PCR Laminar Flow Cabinets 24 • 36 • 48
THE AIR SCIENCE PERFORMANCE ADVANTAGEEach Air Science fume hood includes features expressed through sound design and certified quality construction. Options and accessories add functional perform- ance to meet specific applications.
Professional Quality. Air Science fume hoods comply with current technical and safety regulations.
Multiplex Filtration. The Air Science Multiplex Filter offers a range of options for high perform- ance protection.
Industrial Components. The cabinet frame and work surfaces are durable and chemically resistant.
Reliability. Internal systems are isolated from fumes, extending product life.
Purair PCR cabinets incorporate energy-efficient ebmpapst™ permanently lubricated direct drive centrifugal blowers for maximum operational savings, low noise and minimal vibration.
Purair® PCR-36 shown with Multiplex filtration system.
Room air enters from the top of the cabinet through the disposable pre-filter where larger particles are trapped, increasing the service life of the main HEPA filter.
Air is forced evenly across the HEPA filter to deliver a flow of pure, uniform air within the work zone to dilute and flush airborne contaminants from the work area.
A nominal filter face velocity of 0.45 m/s (90 fpm) ensures that there is sufficient number of air changes within the work zone to eliminate cross-contamination and to maintain optimum cleanliness.
Purified air travels across the work zone to the work surface in a vertical, unidirectional downflow stream, and then exits the work zone across the front area of the cabinet.
A. The main filter is easy to replace; no tools required. The filter clamps tightly against the filter gasket to prevent filter bypass and to maintain filter integrity.
PURAIR PCR AIRFLOW PATTERN
Exhaust Air
Fan/Blower
Room Air Intake
Filtration
Main Filters HEPA/ULPA
Pre-Filter
Pre-filter may be changed while unit is running.
AIR SCIENCE MULTIPLEX FILTRATION TECHNOLOGY The Multiplex filtration consists of a pre-filter and main HEPA filter. The mechanical design enhances safety, convenience and overall value.
• The disposable pre-filter is accessible from the exterior top of the cabinet.
• A filter clamping mechanism allows for the filter to be easily installed and ensures an even seal at the filter peripheral face at all times to prevent bypass leakage.
MULTIPLEX FILTRATION SYSTEM SUMMARYPre-Filter Disposable polyester fibers with 85% arrestance.
HEPA A self-contained filter designed to physically capture particles larger than 0.3 microns (HEPA) or 0.12 microns (ULPA).
Air Science uses long-life Camfil Farr HEPA filters without aluminum separators to increase filter efficiency, mini-mize the potential for leakage and increase filter life.
The optional Monitair microprocessor controller monitors and displays cab-inet operating parameters, airflow, containment, and filter condition; emits audio and visual alerts if condi-tions become unsafe, all on a LCD display.
Air Science® 120 6th Street • Fort Myers, FL 33907 • T/239.489.0024 • Toll Free/800.306.0656 • F/800.306.0677 • www.airscience.com
p:5 Product Specifications PCR Laminar Flow Cabinets 24 • 36 • 48
MODEL DIMENSIONS WEIGHT (lbs/Kg)
Nominal Width
Internal Height
Internal Depth
External (W x D x H) Shipping (W x D x H) Net Ship
PCR-2424"
610 mm24"
610 mm26.75"
679 mm24" x 27" x 35"
610 x 686 x 889 mm40" x 40" x 40"
1016 x 1016 x 1016 mm72 / 33 129 / 59
PCR-3636"
914 mm24"
610 mm26.75"
679 mm36" x 27" x 35"
914 x 686 x 889 mm40" x 40" x 40"
1016 x 1016 x 1016 mm99 / 45 157 / 71
PCR-4848"
1219 mm24"
610 mm26.75"
679 mm48" x 27" x 35"
1219 x 686 x 889 mm52" x 45" x 40"
1321 x 1143 x 1016 mm138 / 63 195 / 88
Purair® PCR-24 Purair® PCR-36 Purair® PCR-48 Side View
PRODUCT SPECIFICATIONS
Purair® Model PCR-24 PCR-36 PCR-48
Airflow Pattern <… Vertical downflow. …>
Airflow1 <… 0.45 m/s (90 fpm) …>
Filter Specifications
Pre-Filter <… Disposable polyester fibers with 85% arrestance. …>
Main Filter2 <… HEPA efficiency, 99.99% at 0.3μm. …>
Clamping <… Screw compression clamp. …>
Lighting <… Compact fluorescent bulb, removed from air stream. …>
UV Lamp <… 1 x 253.7 nanometer 15 watt. …>
Side Windows
Construction <… Polycarbonate. …>
Visible Opacity <… Transparent, colorless. …>
UV Opacity <… UV absorbing. …>
Construction
Color <… White epoxy-coated steel frame with blue legs on cabinet sides. …>
Work Surface <… Standard, white or black polypropylene. Optional, stainless steel. Specify when ordering. …>
Pass Through Ports <… Two standard, tear-drop style. …>
Shelving <… Decontamination shelf on rear wall. …>
Night Door/Cover <… Standard, hinged door cover with safety interlock. …>
Blower <… ebmpapst™ centrifugal fan. …>
Electrical <… 120V, 60Hz or 220V, 50Hz voltages available. Specify when ordering.
Other voltage options available. …>
Electrical Controls <… Main On/Off switch for fan and lighting. Solid-state fan speed control with
RFI filter maintains blower uniformity. UV timer, safety interlock shut-off. …>
1 Average airflow measured 6" (150 mm) from filter face. Uniformity is +/- 20%.2 Camfil Farr filters; HEPA efficiency, 99.99% at 0.3μm.
Specifications are subject to change without notice.
120 6th Street • Fort Myers, FL 33907T/239.489.0024 • Toll Free/800.306.0656 • F/800.306.0677www.airscience.com
©2016 Air Science OW 10243 06/16 Air Science, Purair, Multiplex, and EFT are all registered trademarks of Air Science Corporation
p:6 Product Options PCR Laminar Flow Cabinets 24 • 36 • 48
OPTIONS AND ACCESSORIES
Purair® Model PCR-24 PCR-36 PCR-48
Base Stand Floor-standing base for cabinet. Available with leveling feet or locking casters. Optional motorized height adjustment.
P5-CART P15-CART P20-CART
Polypropylene Construction Cabinets are available in all polypropylene construction. Contact Air Science® for information.
PCR-24-PP PCR-36-PP PCR-48-PP
ULPA Filter ULPA filter efficiency 99.999% at particle sizes between 0.1 to 0.3μm. PCR-24-ULPA PCR-36-ULPA PCR-48-ULPA
Work Surface Optional stainless steel work surface available. SS-TRAY-P5-24 SS-TRAY-P5-36 SS-TRAY-P5-48
Monitair® Controller Microprocessor controller monitors cabinet operating procedures, airflow, UV and filter condition. Emits audio and visual alerts if conditions become unsafe.
MON-P MON-P MON-P
STANDARDS AND COMPLIANCEQuality Management Systems ISO 9001:2008
Environment ISO 14001:2004 ENERGY STAR® Partner
Cabinet Performance IEST-RP-CC002.2 AS 2252.6
Air Quality ISO 14644-1, Class 4
Filtration IEST-RP-CC034.1 IEST-RP-CC001.3 IEST-RP-CC007.1 EN 1822
Electrical Safety UL-C-61010-1 CE Mark RoHS Exempt under EEE Category 9