general · 2020. 11. 6. · quick start guide • use silicone grease on the power contacts to...

2
Quick start guide Use silicone grease on the power contacts to protect them from corrosion in humid environments. Apply lubrication to the locking pins regularly to avoid jamming of the locking mechanism While extracting the battery, do not force the handle laterally. The traction must be perpendicular to the battery surface. Do not forget to open the drain cap to extract or insert the battery. Do not forget to close it before entering the water. Do not use the top handle for the transportation of the battery. The side handle must be used for this purpose. GENERAL MAINTENANCE We´re here to help www.onean.com | support @ onean.com Find the Full User’s Manual at www.onean.com/my-account/ @ oneanboards fb.me/oneanboards @ oneanboards For any inquiries, please, contact us at [email protected] CAUTION ! Please, take a moment to read this manual before using your board

Upload: others

Post on 24-Jan-2021

2 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: general · 2020. 11. 6. · Quick start guide • Use silicone grease on the power contacts to protect them from corrosion in humid environments. • Apply lubrication to the locking

Quick start guide

• Use silicone grease on the power contacts to protect them from corrosion in humid environments.

• Apply lubrication to the locking pins regularly to avoid jamming of the locking mechanism

• While extracting the battery, do not force the handle laterally. The traction must be perpendicular to the battery surface. Do not forget to open the drain cap to extract or insert the battery. Do not forget to close it before entering the water.

• Do not use the top handle for the transportation of the battery. The side handle must be used for this purpose.

general maintenance

We´re here to help

www.onean.com | [email protected]

Find the Full User’s Manual at www.onean.com/my-account/

@oneanboards fb.me/oneanboards @oneanboards

For any inquiries, please, contact us at [email protected]

CAUTION! Please, take a moment to read this

manual before using your board

Page 2: general · 2020. 11. 6. · Quick start guide • Use silicone grease on the power contacts to protect them from corrosion in humid environments. • Apply lubrication to the locking

Important Safety Notes for Onean Power Battery

Onean Battery Pack is a high power Lithium-Ion energy storage system made up of powerful chemical elements. For your safety, it is imperative that you obey the following indications. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury.

The battery provided by Onean incorporates latest generation cells from the main manufacturers. These cells are managed by an electronic system that provides all necessary protections to work within the recommended parameters according to the manufacturers. The entire pack has been exhaustively tested by the developing team and later on certified by a third party qualified company. As seen in other consumer products in the market, there is always the risk that one of the cells has an internal malfunction causing energy liberation disregarding the Battery Management System (BMS). This can lead to, in rare occasions, to the raise of temperature causing even fire. From Aquila we strongly recommend to have adequate fire extinguishing equipment for this specific application.

• Do not cover the charger with any material that could restrict the airflow into it in order to keep it cool. Charge only in cool and well ventilated areas.

• Do not use the charger under direct sunlight.

• Do not disassemble the Battery charger.

• Do not use in case of deterioration of any of its parts (connectors, cables, housing...).

• Recharge the Battery only with the one indicated by the manufacturer.

• Do not use the charger for any use other than its intended purpose.

• Make sure that the red and black poles are oriented correctly when inserted in the Battery connector. Reverse polarity may damage the Battery and/or charger.

• Make sure the outlet main voltage is the same as the one indicated the charger.

• Do not handle the charger with wet hands.

• Charger must be kept dry at all times.

Battery

• Always handle the battery with care. Place it over flat and soft surfaces in order to protect the inferior housing. Always protect it well for transportation purposes.

• Never recharge the battery if it has suffered and impact, drop or is deformed due to any reason.

• Stop using the Battery if there is abnormal smell, heat, discoloration or performance.

• After every use, if it has been quickly discharged, it can reach high temperatures. In order to begin the charge it must be cooled down and you may need to wait a few minutes. This also contributes to the longevity of the pack.

• Stop charging the Battery if it doesn’t complete its charging within 2 hours from flat. The charging must be done in a secured place and always under supervision throughout the entire charge. Do not leave the battery unattended. Do not sleep near the battery.

• Do not charge the Battery near flammable materials.

• Do not store the battery over 20% of capacity (only the last LED should be lid).

• Do not leave the battery exposed to direct sunlight or any other form or heat generation.

• Do not leave the battery within the reach of children.

• Under no circumstances the battery should be open.

• Do not use the battery for any use other than its intended purpose.

• Avoid causing short circuit of the discharge connectors.

• Do not immerse the battery in water or any other liquids.

• Do not throw the battery away. Always use an appropriate recycling point. Please contact the manufacturer for further instructions.

• If any damage of dint is detected, discontinue its use and store it in a secured place.

• For long lasting storage, it’s recommended to frequently recharge it (every 1 or 2 months) always keeping the capacity below 20%.

• Do not expose the battery to temperatures over 50°C or 120°F.

• Do not leave the battery plugged after a complete charge.

• The battery level indicated on the Wireless controller may not be an exact value. This is due to a reading of the voltage and this consequently depends on the discharge to which is subject to. The LED indicator of the battery, near the charging connectors shows an accurate measurement of the battery capacity.

• Do not plug or unplug the battery to the charger if it´s not connected to the power outlet source.

• Do not incinerate the Battery pack even if it is severely damaged or is completely worn out. The Battery pack can explode in a fire. Toxic fumes and materials are created when lithium ion Battery packs are burned.

charger

!CAUTION

Lithium-Ion Batteries have been known to catch fire. Always recharge and store the Battery under supervision in a dry and safe place.