genealogy of performance-based seismic ......• the capacity spectrum method (csm) • a few design...
TRANSCRIPT
![Page 1: GENEALOGY OF PERFORMANCE-BASED SEISMIC ......• The Capacity Spectrum Method (CSM) • A few design and analysis procedures • Issues and prospects • Conclusions Engineers must](https://reader036.vdocuments.site/reader036/viewer/2022081409/60751c6311be83688e32f198/html5/thumbnails/1.jpg)
GENEALOGY OF PERFORMANCE-BASED SEISMIC DESIGN:IS THE PRESENT A RE-CRAFTED VERSION OF THE PAST?
M.A. Sözen1, P. Gülkan2 and A. İrfanoğlu1
1School of Civil Engineering, Purdue University, W. Lafayette, IN 479072Department of Civil Engineering, Çankaya University, Ankara 06790
Symposium on New Generation of Seismic Codes and New Technologies in Earthquake Engineering
February 26 and 27, 2015Ankara, Turkey
![Page 2: GENEALOGY OF PERFORMANCE-BASED SEISMIC ......• The Capacity Spectrum Method (CSM) • A few design and analysis procedures • Issues and prospects • Conclusions Engineers must](https://reader036.vdocuments.site/reader036/viewer/2022081409/60751c6311be83688e32f198/html5/thumbnails/2.jpg)
Disclaimer
This presentation uses a minimum number of equations. Only the most basic principles are employed.
![Page 3: GENEALOGY OF PERFORMANCE-BASED SEISMIC ......• The Capacity Spectrum Method (CSM) • A few design and analysis procedures • Issues and prospects • Conclusions Engineers must](https://reader036.vdocuments.site/reader036/viewer/2022081409/60751c6311be83688e32f198/html5/thumbnails/3.jpg)
SUMMARY
Earthquake structural engineering is undergoing a keen revision in its approach toward the fulfillment of seismic safety and utilitarian serviceability in design. Rather sticking to the established precepts of prescriptive design rules, design has turned toward the achievement of specific results through procedures that are tailored for different buildings and uses. These procedures represent notable research contributions, but they are complicated conceptually for implementation in structural engineering practice. With widely divergent results that are considered as acceptable there is a danger that the methodology could descend into confusion. The Achilles’ heel could prove to be the notion that the design basis earthquake lends itself to precise quantification.
Equivalent linearization of nonlinear systems to analyze complex forms through the use of an 80-year old instrument, the response spectrum, forms the backbone of many current approaches.
![Page 4: GENEALOGY OF PERFORMANCE-BASED SEISMIC ......• The Capacity Spectrum Method (CSM) • A few design and analysis procedures • Issues and prospects • Conclusions Engineers must](https://reader036.vdocuments.site/reader036/viewer/2022081409/60751c6311be83688e32f198/html5/thumbnails/4.jpg)
RecognitionWe gratefully acknowledge the contribution of W.D. Iwan, Caltech, for the account of the historic development of the response spectrum as the prime tool for linear or non-linear analysis. Some slides have been used with his permission.
![Page 5: GENEALOGY OF PERFORMANCE-BASED SEISMIC ......• The Capacity Spectrum Method (CSM) • A few design and analysis procedures • Issues and prospects • Conclusions Engineers must](https://reader036.vdocuments.site/reader036/viewer/2022081409/60751c6311be83688e32f198/html5/thumbnails/5.jpg)
5
1. From the Establishment of Learning– Knowledge (K) is Power (P): K = P
2. From Technology– Power (P) is Work (W)/Time (T): P = W/T
3. From Commerce and Common Sense– Time (T) is Money (M): T = M
Summary of First Principles in Mechanics and Other Topics of Public Discourse
![Page 6: GENEALOGY OF PERFORMANCE-BASED SEISMIC ......• The Capacity Spectrum Method (CSM) • A few design and analysis procedures • Issues and prospects • Conclusions Engineers must](https://reader036.vdocuments.site/reader036/viewer/2022081409/60751c6311be83688e32f198/html5/thumbnails/6.jpg)
6
Solving for Knowledge (K) (simple algebra):K = W/M
Interpretation:1. Greater work yields greater knowledge.2. The more you know, the less money you are
likely to make.
A Few Ideas Come to Mind forExtrapolations (I)
K(nowledge) = P(ower) P = W(ork)/T(ime), T = M
![Page 7: GENEALOGY OF PERFORMANCE-BASED SEISMIC ......• The Capacity Spectrum Method (CSM) • A few design and analysis procedures • Issues and prospects • Conclusions Engineers must](https://reader036.vdocuments.site/reader036/viewer/2022081409/60751c6311be83688e32f198/html5/thumbnails/7.jpg)
7
Solving for Money:M = W/K
Interpretation:1. One way of making more money is to work harder.
We may call that the hard way to riches.2. But recall that money approaches infinity as
knowledge approaches zero, regardless of the work done. We may call that the easy way to becoming rich.
Further Derived ResultsK(nowledge) = P(ower)
P = W(ork)/T(ime), T = M
![Page 8: GENEALOGY OF PERFORMANCE-BASED SEISMIC ......• The Capacity Spectrum Method (CSM) • A few design and analysis procedures • Issues and prospects • Conclusions Engineers must](https://reader036.vdocuments.site/reader036/viewer/2022081409/60751c6311be83688e32f198/html5/thumbnails/8.jpg)
8
The inverse of Knowledge, K, is Ignorance (I) which is of course equal to Bliss, B. Therefore, with
I = BI = 1/KB = M/W
which requires no interpretation.
Further Derived ResultsK(nowledge) = P(ower)
P = W(ork)/T(ime), T = M
![Page 9: GENEALOGY OF PERFORMANCE-BASED SEISMIC ......• The Capacity Spectrum Method (CSM) • A few design and analysis procedures • Issues and prospects • Conclusions Engineers must](https://reader036.vdocuments.site/reader036/viewer/2022081409/60751c6311be83688e32f198/html5/thumbnails/9.jpg)
It is the mark of an educated mind to rest satisfied with the degree of precision which the nature of the subject admits, and not to seek exactness where only an approximation is possible.
Aristotle: Nicomachean Ethics
![Page 10: GENEALOGY OF PERFORMANCE-BASED SEISMIC ......• The Capacity Spectrum Method (CSM) • A few design and analysis procedures • Issues and prospects • Conclusions Engineers must](https://reader036.vdocuments.site/reader036/viewer/2022081409/60751c6311be83688e32f198/html5/thumbnails/10.jpg)
Overview of Presentation• The nature of the problem• Reinforced concrete isn’t inherently ductile
and other sobering realities• Linearizing non-linear systems• Response spectrum concept• The Capacity Spectrum Method (CSM)• A few design and analysis procedures• Issues and prospects• Conclusions
![Page 11: GENEALOGY OF PERFORMANCE-BASED SEISMIC ......• The Capacity Spectrum Method (CSM) • A few design and analysis procedures • Issues and prospects • Conclusions Engineers must](https://reader036.vdocuments.site/reader036/viewer/2022081409/60751c6311be83688e32f198/html5/thumbnails/11.jpg)
Engineers must work with imperfect knowledge. More often than not, the demands on and the capabilities of a particular structure are not known with the precision required by exact analysis. So, experience drives design.
In reinforced concrete our methods fall in three categories.
1. Methods that explain as well as predict (e.g., flexural theory for reinforced concrete).
2. Methods that predict but do not explain (e.g., methods used for proportioning for shear or bond strength).
3. Methods that neither predict nor explain (e.g., maximum and minimum limits for shrinkage or temperature reinforcement specified in codes).
![Page 12: GENEALOGY OF PERFORMANCE-BASED SEISMIC ......• The Capacity Spectrum Method (CSM) • A few design and analysis procedures • Issues and prospects • Conclusions Engineers must](https://reader036.vdocuments.site/reader036/viewer/2022081409/60751c6311be83688e32f198/html5/thumbnails/12.jpg)
The Complexity of Structural Nonlinearity
![Page 13: GENEALOGY OF PERFORMANCE-BASED SEISMIC ......• The Capacity Spectrum Method (CSM) • A few design and analysis procedures • Issues and prospects • Conclusions Engineers must](https://reader036.vdocuments.site/reader036/viewer/2022081409/60751c6311be83688e32f198/html5/thumbnails/13.jpg)
The response of a structure can be sensed from three indices listed in order of importance:
1. The ratio of lateral drift capability to height. 2. The ratio of stiffness to mass. 3. The ratio of strength to weight.
![Page 14: GENEALOGY OF PERFORMANCE-BASED SEISMIC ......• The Capacity Spectrum Method (CSM) • A few design and analysis procedures • Issues and prospects • Conclusions Engineers must](https://reader036.vdocuments.site/reader036/viewer/2022081409/60751c6311be83688e32f198/html5/thumbnails/14.jpg)
max
4 and /w wy
p
f aDR a d
v d
Pujol (2002), from 15 reports on column tests:
DRp = Limiting Drift Ratio, defined as drift at which 20 percent loss ofstrength occurs
ρw = Ratio of cross-sectional area of hoops at spacing sfwy = Yield stress of transverse reinforcementvmax = Ratio of the maximum value of the shear force to the cross-
sectional area of reinforced concrete member defined as the product bd, where b is the width of the section and d is the effective depth
a = span length from maximum moment at face of joint to point of no moment
d = effective depth of the section
![Page 15: GENEALOGY OF PERFORMANCE-BASED SEISMIC ......• The Capacity Spectrum Method (CSM) • A few design and analysis procedures • Issues and prospects • Conclusions Engineers must](https://reader036.vdocuments.site/reader036/viewer/2022081409/60751c6311be83688e32f198/html5/thumbnails/15.jpg)
13 1 50 1 1400 10
s wy be
c g c
f d P LDR
f D A f D
Eberhard and Berry (2003), analyzing data from 62 tests:
DRe = Limiting Drift Ratio in percent, defined as drift when reinforcement buckles
ρs = Volumetric ratio of transverse reinforcement to confined core
fwy= Yield stress for transverse reinforcementdb = Diameter of longitudinal reinforcing barD = Depth of sectionP = Axial loadAg = Gross area of sectionf’c = Cylinder strength of concreteL = Clear height or span
![Page 16: GENEALOGY OF PERFORMANCE-BASED SEISMIC ......• The Capacity Spectrum Method (CSM) • A few design and analysis procedures • Issues and prospects • Conclusions Engineers must](https://reader036.vdocuments.site/reader036/viewer/2022081409/60751c6311be83688e32f198/html5/thumbnails/16.jpg)
0.005 0.006 0.007 0.008 0.009 0.010Transverse Reinforcement Ratio
0
1
2
3
4
5Li
miti
ng D
rift R
atio
, %Column Slenderness = 4
PujolEberhard_LowEberhard_Hi
![Page 17: GENEALOGY OF PERFORMANCE-BASED SEISMIC ......• The Capacity Spectrum Method (CSM) • A few design and analysis procedures • Issues and prospects • Conclusions Engineers must](https://reader036.vdocuments.site/reader036/viewer/2022081409/60751c6311be83688e32f198/html5/thumbnails/17.jpg)
0.005 0.006 0.007 0.008 0.009 0.010Transverse Reinforcement Ratio
0
1
2
3
4
5Li
miti
ng D
rift R
atio
, %
PujolEberhard_LowEberhard_Hi
Column Slenderness = 6
![Page 18: GENEALOGY OF PERFORMANCE-BASED SEISMIC ......• The Capacity Spectrum Method (CSM) • A few design and analysis procedures • Issues and prospects • Conclusions Engineers must](https://reader036.vdocuments.site/reader036/viewer/2022081409/60751c6311be83688e32f198/html5/thumbnails/18.jpg)
Frequency Spectrum Analysis Versus Time History Analysis
• Random-like signals are often better described in the frequency domain.
• Smoothed frequency spectra are useful for design and can be easily tied to probabilistic hazard descriptions.
• Strictly speaking, frequency domain analysis is only applicable to linear systems, so the nonlinear system must be linearized to use this approach.
![Page 19: GENEALOGY OF PERFORMANCE-BASED SEISMIC ......• The Capacity Spectrum Method (CSM) • A few design and analysis procedures • Issues and prospects • Conclusions Engineers must](https://reader036.vdocuments.site/reader036/viewer/2022081409/60751c6311be83688e32f198/html5/thumbnails/19.jpg)
Why linearize an inherently nonlinear problem?
• Linear analysis is well understood, easy to apply, and provides intuitive insights into the nature of the system, and range of possible outcomes.
• The response of many nonlinear systems appears similar to that of linear systems.
• Seismic excitation is often specified by a linear frequency domain representation such as the Response Spectrum.
![Page 20: GENEALOGY OF PERFORMANCE-BASED SEISMIC ......• The Capacity Spectrum Method (CSM) • A few design and analysis procedures • Issues and prospects • Conclusions Engineers must](https://reader036.vdocuments.site/reader036/viewer/2022081409/60751c6311be83688e32f198/html5/thumbnails/20.jpg)
History of the Response Spectrum
Concept of the Earthquake SpectrumBiot, 1932 (Caltech Thesis)
The Response SpectrumBenioff, 1934 Housner, 1941-59
Response Spectra for Recorded MotionsBiot, Housner, Hudson, Caughey, McCann, 1941-75
Procedures for Developing Design Response SpectraHousner, 1959 Newmark, 1965-81 Newmark and Hall, 1982
The Inelastic Response SpectrumNewmark and Hall, 1982
The Capacity Spectrum MethodFreeman, et al, 1975 SSC/ATC, 1996
![Page 21: GENEALOGY OF PERFORMANCE-BASED SEISMIC ......• The Capacity Spectrum Method (CSM) • A few design and analysis procedures • Issues and prospects • Conclusions Engineers must](https://reader036.vdocuments.site/reader036/viewer/2022081409/60751c6311be83688e32f198/html5/thumbnails/21.jpg)
History of the Response Spectrum
Concept of the Earthquake SpectrumBiot, 1932 (Caltech Thesis)
The Response SpectrumBenioff, 1934 Housner, 1941-59
Response Spectra for Recorded MotionsBiot, Housner, Hudson, Caughey, McCann, 1941-75
Procedures for Developing Design Response SpectraHousner, 1959 Newmark, 1965-81 Newmark and Hall, 1982
The Inelastic Response SpectrumNewmark and Hall, 1982
The Capacity Spectrum MethodFreeman, et al, 1975 SSC/ATC, 1996
![Page 22: GENEALOGY OF PERFORMANCE-BASED SEISMIC ......• The Capacity Spectrum Method (CSM) • A few design and analysis procedures • Issues and prospects • Conclusions Engineers must](https://reader036.vdocuments.site/reader036/viewer/2022081409/60751c6311be83688e32f198/html5/thumbnails/22.jpg)
History of the Response Spectrum
Concept of the Earthquake SpectrumBiot, 1932 (Caltech Thesis)
The Response SpectrumBenioff, 1934 Housner, 1941-59
Response Spectra for Recorded MotionsBiot, Housner, Hudson, Caughey, McCann, 1941-75
Procedures for Developing Design Response SpectraHousner, 1959 Newmark, 1965-81 Newmark and Hall, 1982
The Inelastic Response SpectrumNewmark and Hall, 1982
The Capacity Spectrum MethodFreeman, et al, 1975 SSC/ATC, 1996
![Page 23: GENEALOGY OF PERFORMANCE-BASED SEISMIC ......• The Capacity Spectrum Method (CSM) • A few design and analysis procedures • Issues and prospects • Conclusions Engineers must](https://reader036.vdocuments.site/reader036/viewer/2022081409/60751c6311be83688e32f198/html5/thumbnails/23.jpg)
History of the Response Spectrum
Concept of the Earthquake SpectrumBiot, 1932 (Caltech Thesis)
The Response SpectrumBenioff, 1934 Housner, 1941-59
Response Spectra for Recorded MotionsBiot, Housner, Hudson, Caughey, McCann, 1941-75
Procedures for Developing Design Response SpectraHousner, 1959 Newmark, 1965-81 Newmark and Hall, 1982
The Inelastic Response SpectrumNewmark and Hall, 1982
The Capacity Spectrum MethodFreeman, et al, 1975 SSC/ATC, 1996
![Page 24: GENEALOGY OF PERFORMANCE-BASED SEISMIC ......• The Capacity Spectrum Method (CSM) • A few design and analysis procedures • Issues and prospects • Conclusions Engineers must](https://reader036.vdocuments.site/reader036/viewer/2022081409/60751c6311be83688e32f198/html5/thumbnails/24.jpg)
Concept of the Earthquake SpectrumBiot, 1932 (Caltech Thesis)
The Response SpectrumBenioff, 1934 Housner, 1941-59
Response Spectra for Recorded MotionsBiot, Housner, Hudson, Caughey, McCann, 1941-75
Procedures for Developing Design Response SpectraHousner, 1959 Newmark, 1965-81 Newmark and Hall, 1982
The Inelastic Response SpectrumNewmark and Hall, 1982
The Capacity Spectrum MethodFreeman, et al, 1975 SSC/ATC, 1996
History of the Response Spectrum
![Page 25: GENEALOGY OF PERFORMANCE-BASED SEISMIC ......• The Capacity Spectrum Method (CSM) • A few design and analysis procedures • Issues and prospects • Conclusions Engineers must](https://reader036.vdocuments.site/reader036/viewer/2022081409/60751c6311be83688e32f198/html5/thumbnails/25.jpg)
Concept of the Earthquake SpectrumBiot, 1932 (Caltech Thesis)
The Response SpectrumBenioff, 1934 Housner, 1941-59
Response Spectra for Recorded MotionsBiot, Housner, Hudson, Caughey, McCann, 1941-75
Procedures for Developing Design Response SpectraHousner, 1959 Newmark, 1965-81 Newmark and Hall, 1982
The Inelastic Response SpectrumNewmark and Hall, 1982
The Capacity Spectrum MethodFreeman, et al, 1975 SSC/ATC, 1996
History of the Response Spectrum
![Page 26: GENEALOGY OF PERFORMANCE-BASED SEISMIC ......• The Capacity Spectrum Method (CSM) • A few design and analysis procedures • Issues and prospects • Conclusions Engineers must](https://reader036.vdocuments.site/reader036/viewer/2022081409/60751c6311be83688e32f198/html5/thumbnails/26.jpg)
History of the Response Spectrum
Concept of the Earthquake SpectrumBiot, 1932 (Caltech Thesis)
The Response SpectrumBenioff, 1934 Housner, 1941-59
Response Spectra for Recorded MotionsBiot, Housner, Hudson, Caughey, McCann, 1941-75
Procedures for Developing Design Response SpectraHousner, 1959 Newmark, 1965-81 Newmark and Hall, 1982
The Inelastic Response SpectrumNewmark and Hall, 1982
The Capacity Spectrum MethodFreeman, et al, 1975 SSC/ATC, 1996
![Page 27: GENEALOGY OF PERFORMANCE-BASED SEISMIC ......• The Capacity Spectrum Method (CSM) • A few design and analysis procedures • Issues and prospects • Conclusions Engineers must](https://reader036.vdocuments.site/reader036/viewer/2022081409/60751c6311be83688e32f198/html5/thumbnails/27.jpg)
History of the Response Spectrum
Concept of the Earthquake SpectrumBiot, 1932 (Caltech Thesis)
The Response SpectrumBenioff, 1934 Housner, 1941-59
Response Spectra for Recorded MotionsBiot, Housner, Hudson, Caughey, McCann, 1941-75
Procedures for Developing Design Response SpectraHousner, 1959 Newmark, 1965-81 Newmark and Hall, 1982
The Inelastic Response SpectrumNewmark and Hall, 1982
The Capacity Spectrum MethodFreeman, et al, 1975 SSC/ATC, 1996
NRC Regulatory Guide 1.60NRC Regulatory Guide 1.60
![Page 28: GENEALOGY OF PERFORMANCE-BASED SEISMIC ......• The Capacity Spectrum Method (CSM) • A few design and analysis procedures • Issues and prospects • Conclusions Engineers must](https://reader036.vdocuments.site/reader036/viewer/2022081409/60751c6311be83688e32f198/html5/thumbnails/28.jpg)
History of the Response Spectrum
Concept of the Earthquake SpectrumBiot, 1932 (Caltech Thesis)
The Response SpectrumBenioff, 1934 Housner, 1941-59
Response Spectra for Recorded MotionsBiot, Housner, Hudson, Caughey, McCann, 1941-75
Procedures for Developing Design Response SpectraHousner, 1959 Newmark, 1965-81 Newmark and Hall, 1982
The Inelastic Response SpectrumNewmark and Hall, 1982
The Capacity Spectrum MethodFreeman, et al, 1975 SSC/ATC, 1996
![Page 29: GENEALOGY OF PERFORMANCE-BASED SEISMIC ......• The Capacity Spectrum Method (CSM) • A few design and analysis procedures • Issues and prospects • Conclusions Engineers must](https://reader036.vdocuments.site/reader036/viewer/2022081409/60751c6311be83688e32f198/html5/thumbnails/29.jpg)
History of the Response Spectrum
Concept of the Earthquake SpectrumBiot, 1932 (Caltech Thesis)
The Response SpectrumBenioff, 1934 Housner, 1941-59
Response Spectra for Recorded MotionsBiot, Housner, Hudson, Caughey, McCann, 1941-75
Procedures for Developing Design Response SpectraHousner, 1959 Newmark, 1965-81 Newmark and Hall, 1982
The Inelastic Response SpectrumNewmark and Hall, 1982
The Capacity Spectrum MethodFreeman, et al, 1975 SSC/ATC, 1996
![Page 30: GENEALOGY OF PERFORMANCE-BASED SEISMIC ......• The Capacity Spectrum Method (CSM) • A few design and analysis procedures • Issues and prospects • Conclusions Engineers must](https://reader036.vdocuments.site/reader036/viewer/2022081409/60751c6311be83688e32f198/html5/thumbnails/30.jpg)
History of the Response Spectrum
Concept of the Earthquake SpectrumBiot, 1932 (Caltech Thesis)
The Response SpectrumBenioff, 1934 Housner, 1941-59
Response Spectra for Recorded MotionsBiot, Housner, Hudson, Caughey, McCann, 1941-75
Procedures for Developing Design Response SpectraHousner, 1959 Newmark, 1965-81 Newmark and Hall, 1982
The Inelastic Response SpectrumNewmark and Hall, 1982
The Capacity Spectrum MethodFreeman, et al, 1975 SSC/ATC, 1996
![Page 31: GENEALOGY OF PERFORMANCE-BASED SEISMIC ......• The Capacity Spectrum Method (CSM) • A few design and analysis procedures • Issues and prospects • Conclusions Engineers must](https://reader036.vdocuments.site/reader036/viewer/2022081409/60751c6311be83688e32f198/html5/thumbnails/31.jpg)
History of the Response Spectrum
Concept of the Earthquake SpectrumBiot, 1932 (Caltech Thesis)
The Response SpectrumBenioff, 1934 Housner, 1941-59
Response Spectra for Recorded MotionsBiot, Housner, Hudson, Caughey, McCann, 1941-75
Procedures for Developing Design Response SpectraHousner, 1959 Newmark, 1965-81 Newmark and Hall, 1982
The Inelastic Response SpectrumNewmark and Hall, 1982
The Capacity Spectrum MethodFreeman, wt al, 1975 SSC/ATC, 1996
Demand SpectrumThe Acceleration Displacement Response Spectrum (ADRS)
![Page 32: GENEALOGY OF PERFORMANCE-BASED SEISMIC ......• The Capacity Spectrum Method (CSM) • A few design and analysis procedures • Issues and prospects • Conclusions Engineers must](https://reader036.vdocuments.site/reader036/viewer/2022081409/60751c6311be83688e32f198/html5/thumbnails/32.jpg)
Concept of the Earthquake SpectruBiot, 1932 (Caltech Thesis)
The Response SpectrumBenioff, 1934 Housner, 1941-59
Response Spectra for Recorded MotionsBiot, Housner, Hudson, Caughey, McCann, 1941-75
Procedures for Developing Design Response SpectraHousner, 1959 Newmark, 1965-81 Newmark and Hall, 1982
The Inelastic Response SpectrumNewmark and Hall, 1982
The Capacity Spectrum MethodFreeman, wt al, 1975 SSC/ATC, 1996
Evolution of the Capacity SpectrumStatic Pushover
F
History of the Response Spectrum
F = MA
![Page 33: GENEALOGY OF PERFORMANCE-BASED SEISMIC ......• The Capacity Spectrum Method (CSM) • A few design and analysis procedures • Issues and prospects • Conclusions Engineers must](https://reader036.vdocuments.site/reader036/viewer/2022081409/60751c6311be83688e32f198/html5/thumbnails/33.jpg)
History of the Response Spectrum
Concept of the Earthquake SpectrumBiot, 1932 (Caltech Thesis)
The Response SpectrumBenioff, 1934 Housner, 1941-59
Response Spectra for Recorded MotionsBiot, Housner, Hudson, Caughey, McCann, 1941-75
Procedures for Developing Design Response SpectraHousner, 1959 Newmark, 1965-81 Newmark and Hall, 1982
The Inelastic Response SpectrumNewmark and Hall, 1982
The Capacity Spectrum MethodFreeman, et al, 1975 SSC/ATC, 1996
![Page 34: GENEALOGY OF PERFORMANCE-BASED SEISMIC ......• The Capacity Spectrum Method (CSM) • A few design and analysis procedures • Issues and prospects • Conclusions Engineers must](https://reader036.vdocuments.site/reader036/viewer/2022081409/60751c6311be83688e32f198/html5/thumbnails/34.jpg)
History of the Response Spectrum
Concept of the Earthquake SpectrumBiot, 1932 (Caltech Thesis)
The Response SpectrumBenioff, 1934 Housner, 1941-59
Response Spectra for Recorded MotionsBiot, Housner, Hudson, Caughey, McCann, 1941-75
Procedures for Developing Design Response SpectraHousner, 1959 Newmark, 1965-81 Newmark and Hall, 1982
The Inelastic Response SpectrumNewmark and Hall, 1982
The Capacity Spectrum MethodFreeman, et al, 1975 SSC/ATC, 1996
![Page 35: GENEALOGY OF PERFORMANCE-BASED SEISMIC ......• The Capacity Spectrum Method (CSM) • A few design and analysis procedures • Issues and prospects • Conclusions Engineers must](https://reader036.vdocuments.site/reader036/viewer/2022081409/60751c6311be83688e32f198/html5/thumbnails/35.jpg)
Appeal of the CSM Concept
• Uses readily available actual and design linear Response Spectra
• Based on “intuitive” concept of the equality of Earthquake Demand and Structural Capacity
• Readily adapted to Performance-Based Design
![Page 36: GENEALOGY OF PERFORMANCE-BASED SEISMIC ......• The Capacity Spectrum Method (CSM) • A few design and analysis procedures • Issues and prospects • Conclusions Engineers must](https://reader036.vdocuments.site/reader036/viewer/2022081409/60751c6311be83688e32f198/html5/thumbnails/36.jpg)
Capacity-Based Performance Criteria
![Page 37: GENEALOGY OF PERFORMANCE-BASED SEISMIC ......• The Capacity Spectrum Method (CSM) • A few design and analysis procedures • Issues and prospects • Conclusions Engineers must](https://reader036.vdocuments.site/reader036/viewer/2022081409/60751c6311be83688e32f198/html5/thumbnails/37.jpg)
Inelastic Spectrum or CSM?
• Inelastic Response Spectrum (IRS)Pro: Provides a direct solution (no iteration).Con: IRS is only available for a limited set of ground
motions and system behavior. Can not be easily adjusted.
• Capacity Spectrum Method (CSM)Con: A slightly more complex iterative solution
procedure is needed. Damping controversial.Pro: Uses readily available linear RS. Easily
adaptable to different system behavior. Relates to Performance-Based Engineering.
![Page 38: GENEALOGY OF PERFORMANCE-BASED SEISMIC ......• The Capacity Spectrum Method (CSM) • A few design and analysis procedures • Issues and prospects • Conclusions Engineers must](https://reader036.vdocuments.site/reader036/viewer/2022081409/60751c6311be83688e32f198/html5/thumbnails/38.jpg)
Crucial Question:
How can we best make an inherently nonlinear problem appear to be linear for purposes of analysis?
In principle, we need to find a set of “equivalent linear” stiffness and damping parameters that minimizes some measure of the difference between the response of the actual nonlinear inelastic system and the replacement equivalent linear system.
![Page 39: GENEALOGY OF PERFORMANCE-BASED SEISMIC ......• The Capacity Spectrum Method (CSM) • A few design and analysis procedures • Issues and prospects • Conclusions Engineers must](https://reader036.vdocuments.site/reader036/viewer/2022081409/60751c6311be83688e32f198/html5/thumbnails/39.jpg)
Equivalent Linear Parameters of the Conventional CSM
ADRS = Acceleration Displacement Response Spectrum
ATC-40
Equivalent Linear Damping
Equivalent Linear Stiffness (Period)
![Page 40: GENEALOGY OF PERFORMANCE-BASED SEISMIC ......• The Capacity Spectrum Method (CSM) • A few design and analysis procedures • Issues and prospects • Conclusions Engineers must](https://reader036.vdocuments.site/reader036/viewer/2022081409/60751c6311be83688e32f198/html5/thumbnails/40.jpg)
CAMUS Experiment
Performance in blind predictions:Closest: driftsNext: Moments, forcesWorst: Strains
Labbé and Altınyollar (2011)
![Page 41: GENEALOGY OF PERFORMANCE-BASED SEISMIC ......• The Capacity Spectrum Method (CSM) • A few design and analysis procedures • Issues and prospects • Conclusions Engineers must](https://reader036.vdocuments.site/reader036/viewer/2022081409/60751c6311be83688e32f198/html5/thumbnails/41.jpg)
CAMUS Experiment: Range of Calculated Floor Response SpectraLabbé and Altınyollar (2011)
![Page 42: GENEALOGY OF PERFORMANCE-BASED SEISMIC ......• The Capacity Spectrum Method (CSM) • A few design and analysis procedures • Issues and prospects • Conclusions Engineers must](https://reader036.vdocuments.site/reader036/viewer/2022081409/60751c6311be83688e32f198/html5/thumbnails/42.jpg)
Equivalent Linear Parameters of the Conventional CSM
• The equivalent linear damping factor is derived from the area within the hysteresis loop of the structural system. Loops vary in size during dynamic response.
• The equivalent linear stiffness (or period) is the “secant” stiffness (or period) associated with the Capacity Spectrum.
![Page 43: GENEALOGY OF PERFORMANCE-BASED SEISMIC ......• The Capacity Spectrum Method (CSM) • A few design and analysis procedures • Issues and prospects • Conclusions Engineers must](https://reader036.vdocuments.site/reader036/viewer/2022081409/60751c6311be83688e32f198/html5/thumbnails/43.jpg)
Equivalent Linear Parameters of the Conventional CSM
• The equivalent linear damping factor is derived from the area within the hysteresis loop of the structural system.
• The equivalent linear stiffness (or period) is the “secant” stiffness (or period) associated with the Capacity Spectrum.
![Page 44: GENEALOGY OF PERFORMANCE-BASED SEISMIC ......• The Capacity Spectrum Method (CSM) • A few design and analysis procedures • Issues and prospects • Conclusions Engineers must](https://reader036.vdocuments.site/reader036/viewer/2022081409/60751c6311be83688e32f198/html5/thumbnails/44.jpg)
Deficiencies of the Conventional CSM Approach
• There is inadequate theoretical or numerical basis for the conventional formulas for equivalent damping.
• The secant stiffness is known to be a poor estimate of the equivalent linear stiffness of most nonlinear systems.
• Equivalent linear parameters are inter-related, so modifying one parameter requires modifying several others.
• This presentation will discuss only one of many methods for improvement of the conventional CSM approach to determine the limiting displacement. There are manyother possible ways of calculating the performance point.
![Page 45: GENEALOGY OF PERFORMANCE-BASED SEISMIC ......• The Capacity Spectrum Method (CSM) • A few design and analysis procedures • Issues and prospects • Conclusions Engineers must](https://reader036.vdocuments.site/reader036/viewer/2022081409/60751c6311be83688e32f198/html5/thumbnails/45.jpg)
Example of CSM DeficienciesRatio of Actual to Conventional CSM Response
Near-field Ground Motion
![Page 46: GENEALOGY OF PERFORMANCE-BASED SEISMIC ......• The Capacity Spectrum Method (CSM) • A few design and analysis procedures • Issues and prospects • Conclusions Engineers must](https://reader036.vdocuments.site/reader036/viewer/2022081409/60751c6311be83688e32f198/html5/thumbnails/46.jpg)
Statement of the Problem
Find a new set of equivalent linear stiffness (or period) and damping parameters that gives better response predictions than the conventional CSM and, if possible, do this without further complicating the analysis.
![Page 47: GENEALOGY OF PERFORMANCE-BASED SEISMIC ......• The Capacity Spectrum Method (CSM) • A few design and analysis procedures • Issues and prospects • Conclusions Engineers must](https://reader036.vdocuments.site/reader036/viewer/2022081409/60751c6311be83688e32f198/html5/thumbnails/47.jpg)
An Early Approach to LinearizationTranslate the RS along a constant displacement axis to minimize
the mean square difference from a linear Response Spectrum
Iwan, 1980
![Page 48: GENEALOGY OF PERFORMANCE-BASED SEISMIC ......• The Capacity Spectrum Method (CSM) • A few design and analysis procedures • Issues and prospects • Conclusions Engineers must](https://reader036.vdocuments.site/reader036/viewer/2022081409/60751c6311be83688e32f198/html5/thumbnails/48.jpg)
Near-field Ground Motions
• Associated with high ground velocities• Characterized by strong pulse-like motion• Influenced by directivity effects• Fault perpendicular direction usually most demanding• Observed from earthquake records in China, US,
Europe, Japan, and Taiwan
![Page 49: GENEALOGY OF PERFORMANCE-BASED SEISMIC ......• The Capacity Spectrum Method (CSM) • A few design and analysis procedures • Issues and prospects • Conclusions Engineers must](https://reader036.vdocuments.site/reader036/viewer/2022081409/60751c6311be83688e32f198/html5/thumbnails/49.jpg)
Significant European Near-field Ground Motions
• MS=6.9 Erzincan, March 13, 1992• MW =7.4 Kocaeli, August 17,1999• MW=7.2 Düzce, November 12, 1999
![Page 50: GENEALOGY OF PERFORMANCE-BASED SEISMIC ......• The Capacity Spectrum Method (CSM) • A few design and analysis procedures • Issues and prospects • Conclusions Engineers must](https://reader036.vdocuments.site/reader036/viewer/2022081409/60751c6311be83688e32f198/html5/thumbnails/50.jpg)
Erzincan Earthquake Accelerogram
![Page 51: GENEALOGY OF PERFORMANCE-BASED SEISMIC ......• The Capacity Spectrum Method (CSM) • A few design and analysis procedures • Issues and prospects • Conclusions Engineers must](https://reader036.vdocuments.site/reader036/viewer/2022081409/60751c6311be83688e32f198/html5/thumbnails/51.jpg)
Resolving a Potential Difficulty
By not employing the Secant Stiffness (period), the Performance Point will not automatically lie on the Capacity Curve. This can lead to misinterpretation of the results and a more complicated solution procedure. But this potential problem can easily be solved by using a slightly modified response spectrum
![Page 52: GENEALOGY OF PERFORMANCE-BASED SEISMIC ......• The Capacity Spectrum Method (CSM) • A few design and analysis procedures • Issues and prospects • Conclusions Engineers must](https://reader036.vdocuments.site/reader036/viewer/2022081409/60751c6311be83688e32f198/html5/thumbnails/52.jpg)
The Modified ADRS (MADRS)
![Page 53: GENEALOGY OF PERFORMANCE-BASED SEISMIC ......• The Capacity Spectrum Method (CSM) • A few design and analysis procedures • Issues and prospects • Conclusions Engineers must](https://reader036.vdocuments.site/reader036/viewer/2022081409/60751c6311be83688e32f198/html5/thumbnails/53.jpg)
The Modified ADRS (MADRS)
![Page 54: GENEALOGY OF PERFORMANCE-BASED SEISMIC ......• The Capacity Spectrum Method (CSM) • A few design and analysis procedures • Issues and prospects • Conclusions Engineers must](https://reader036.vdocuments.site/reader036/viewer/2022081409/60751c6311be83688e32f198/html5/thumbnails/54.jpg)
The Modified ADRS (MADRS)
![Page 55: GENEALOGY OF PERFORMANCE-BASED SEISMIC ......• The Capacity Spectrum Method (CSM) • A few design and analysis procedures • Issues and prospects • Conclusions Engineers must](https://reader036.vdocuments.site/reader036/viewer/2022081409/60751c6311be83688e32f198/html5/thumbnails/55.jpg)
The Modified ADRS (MADRS)
![Page 56: GENEALOGY OF PERFORMANCE-BASED SEISMIC ......• The Capacity Spectrum Method (CSM) • A few design and analysis procedures • Issues and prospects • Conclusions Engineers must](https://reader036.vdocuments.site/reader036/viewer/2022081409/60751c6311be83688e32f198/html5/thumbnails/56.jpg)
The Modified ADRS (MADRS)
![Page 57: GENEALOGY OF PERFORMANCE-BASED SEISMIC ......• The Capacity Spectrum Method (CSM) • A few design and analysis procedures • Issues and prospects • Conclusions Engineers must](https://reader036.vdocuments.site/reader036/viewer/2022081409/60751c6311be83688e32f198/html5/thumbnails/57.jpg)
The Modified ADRS (MADRS)
![Page 58: GENEALOGY OF PERFORMANCE-BASED SEISMIC ......• The Capacity Spectrum Method (CSM) • A few design and analysis procedures • Issues and prospects • Conclusions Engineers must](https://reader036.vdocuments.site/reader036/viewer/2022081409/60751c6311be83688e32f198/html5/thumbnails/58.jpg)
The Modified ADRS (MADRS)
![Page 59: GENEALOGY OF PERFORMANCE-BASED SEISMIC ......• The Capacity Spectrum Method (CSM) • A few design and analysis procedures • Issues and prospects • Conclusions Engineers must](https://reader036.vdocuments.site/reader036/viewer/2022081409/60751c6311be83688e32f198/html5/thumbnails/59.jpg)
Construct Capacity Spectrum from pushover analysis.
S a
Capacity Spectrum
S a
Capacity Spectrum
S d
![Page 60: GENEALOGY OF PERFORMANCE-BASED SEISMIC ......• The Capacity Spectrum Method (CSM) • A few design and analysis procedures • Issues and prospects • Conclusions Engineers must](https://reader036.vdocuments.site/reader036/viewer/2022081409/60751c6311be83688e32f198/html5/thumbnails/60.jpg)
Determine To and dy from the Capacity Spectrum.
S a T 0
d y
Capacity Spectrum
S a T 0
d y
Capacity Spectrum
S d
![Page 61: GENEALOGY OF PERFORMANCE-BASED SEISMIC ......• The Capacity Spectrum Method (CSM) • A few design and analysis procedures • Issues and prospects • Conclusions Engineers must](https://reader036.vdocuments.site/reader036/viewer/2022081409/60751c6311be83688e32f198/html5/thumbnails/61.jpg)
Find maximum displacements for a set of discrete values of ductility.
S a T 0
d y d m=2 d m=3 dm=4 dm=5
Capacity Spectrum
S a T 0
d y d m=2 d m=3 dm=4 dm=5
Capacity Spectrum
S d
![Page 62: GENEALOGY OF PERFORMANCE-BASED SEISMIC ......• The Capacity Spectrum Method (CSM) • A few design and analysis procedures • Issues and prospects • Conclusions Engineers must](https://reader036.vdocuments.site/reader036/viewer/2022081409/60751c6311be83688e32f198/html5/thumbnails/62.jpg)
Construct Secant Stiffness for each ductility.
S a T 0T m=2
T m=3
T m=4
T m=5
d y d m=2 d m=3 dm=4 dm=5
Capacity Spectrum
S a T 0T m=2
T m=3
T m=4
T m=5
d y d m=2 d m=3 dm=4 dm=5
Capacity Spectrum
S d
![Page 63: GENEALOGY OF PERFORMANCE-BASED SEISMIC ......• The Capacity Spectrum Method (CSM) • A few design and analysis procedures • Issues and prospects • Conclusions Engineers must](https://reader036.vdocuments.site/reader036/viewer/2022081409/60751c6311be83688e32f198/html5/thumbnails/63.jpg)
Construct a family of site ADRS for damping coefficients consistent with the selected
ductilities.S a
ζ 0
m=5
Capacity Spectrum
S a
ζ 0
ζ
Capacity Spectrum
S d
ADRS Family
![Page 64: GENEALOGY OF PERFORMANCE-BASED SEISMIC ......• The Capacity Spectrum Method (CSM) • A few design and analysis procedures • Issues and prospects • Conclusions Engineers must](https://reader036.vdocuments.site/reader036/viewer/2022081409/60751c6311be83688e32f198/html5/thumbnails/64.jpg)
Compute MADRS from ADRS for chosen set of ductilities
S a
ζ 0
ζ m=2
ζ m=3
ζ m=4
ζ m=5
Capacity Spectrum
S a
ζ 0
ζ m=2
ζ m=3
ζ m=4
ζ m=5
Capacity Spectrum
S d
( )MADRS M xADRSm
![Page 65: GENEALOGY OF PERFORMANCE-BASED SEISMIC ......• The Capacity Spectrum Method (CSM) • A few design and analysis procedures • Issues and prospects • Conclusions Engineers must](https://reader036.vdocuments.site/reader036/viewer/2022081409/60751c6311be83688e32f198/html5/thumbnails/65.jpg)
Compute MADRS from ADRS for chosen set of ductilities
S a T 0T m=2
T m=3
T m=4
ζ 0
ζ m=2
ζ m=3
ζ m=4
ζ m=5
T m=5
d y d m=2 d m=3 dm=4 dm=5
Capacity Spectrum
MADRSFamily
S a T 0T m=2
T m=3
T m=4
ζ 0
ζ m=2
ζ m=3
ζ m=4
ζ m=5
T m=5
d y d m=2 d m=3 dm=4 dm=5
Capacity Spectrum
Family
S d
![Page 66: GENEALOGY OF PERFORMANCE-BASED SEISMIC ......• The Capacity Spectrum Method (CSM) • A few design and analysis procedures • Issues and prospects • Conclusions Engineers must](https://reader036.vdocuments.site/reader036/viewer/2022081409/60751c6311be83688e32f198/html5/thumbnails/66.jpg)
Identify intersections of MADRS and Secant Stiffness lines.
S a T 0T m=2
T m=3
T m=4
ζ 0
ζ m=2
ζ m=3
ζ m=4
ζ m=5
T m=5
d y d m=2 d m=3 dm=4 dm=5
Capacity Spectrum
MADRSFamily
S a T 0T m=2
T m=3
T m=4
ζ 0
ζ m=2
ζ m=3
ζ m=4
ζ m=5
T m=5
d y d m=2 d m=3 dm=4 dm=5
Capacity Spectrum
Family
S d
![Page 67: GENEALOGY OF PERFORMANCE-BASED SEISMIC ......• The Capacity Spectrum Method (CSM) • A few design and analysis procedures • Issues and prospects • Conclusions Engineers must](https://reader036.vdocuments.site/reader036/viewer/2022081409/60751c6311be83688e32f198/html5/thumbnails/67.jpg)
Connect points to obtain the Locus of Performance Points.
S a T 0T m=2
T m=3
T m=4
ζ 0
ζ m=2
ζ m=3
ζ m=4
ζ m=5
T m=5
d y d m=2 d m=3 dm=4 dm=5
Capacity Spectrum
MADRSFamily
S a T 0T m=2
T m=3
T m=4
ζ 0
ζ m=2
ζ m=3
ζ m=4
ζ m=5
T m=5
d y d m=2 d m=3 dm=4 dm=5
Capacity Spectrum
Locus of Performance Points
Family
S d
![Page 68: GENEALOGY OF PERFORMANCE-BASED SEISMIC ......• The Capacity Spectrum Method (CSM) • A few design and analysis procedures • Issues and prospects • Conclusions Engineers must](https://reader036.vdocuments.site/reader036/viewer/2022081409/60751c6311be83688e32f198/html5/thumbnails/68.jpg)
Locate intersection of Locus of Performance points and Capacity Spectrum. This is the
system Performance Point.S a T 0
T m=2
T m=3
T m=4
ζ 0
ζ m=2
ζ m=3
ζ m=4
ζ m=5
T m=5
d y d m=2 d m=3 dm=4 dm=5
dmax
amax
Capacity Spectrum
MADRSFamily
Performance Point
S a T 0T m=2
T m=3
T m=4
ζ 0
ζ m=2
ζ m=3
ζ m=4
ζ m=5
T m=5
d y d m=2 d m=3 dm=4 dm=5
dmax
amax
Capacity Spectrum
MADRSFamily
Performance Point
S d
Locus of Performance Points
![Page 69: GENEALOGY OF PERFORMANCE-BASED SEISMIC ......• The Capacity Spectrum Method (CSM) • A few design and analysis procedures • Issues and prospects • Conclusions Engineers must](https://reader036.vdocuments.site/reader036/viewer/2022081409/60751c6311be83688e32f198/html5/thumbnails/69.jpg)
Example of an Earthquake-Specific MADRS and Locus of Performance Points
El Centro Max Velocity Direction
![Page 70: GENEALOGY OF PERFORMANCE-BASED SEISMIC ......• The Capacity Spectrum Method (CSM) • A few design and analysis procedures • Issues and prospects • Conclusions Engineers must](https://reader036.vdocuments.site/reader036/viewer/2022081409/60751c6311be83688e32f198/html5/thumbnails/70.jpg)
An Interesting Possible Extension of the New Approach
The Locus of Performance Points could be used as a basis for determining the Seismic Margin of important
structures and systems.
![Page 71: GENEALOGY OF PERFORMANCE-BASED SEISMIC ......• The Capacity Spectrum Method (CSM) • A few design and analysis procedures • Issues and prospects • Conclusions Engineers must](https://reader036.vdocuments.site/reader036/viewer/2022081409/60751c6311be83688e32f198/html5/thumbnails/71.jpg)
Conclusions
1. Equivalent linearization can be an accurate and useful tool for seismic design and analysis if performed properly.
2. By using the a statistical approach for determining equivalent linear parameters, it is possible to obtain significantly improved accuracy over the conventional CSM approach.
![Page 72: GENEALOGY OF PERFORMANCE-BASED SEISMIC ......• The Capacity Spectrum Method (CSM) • A few design and analysis procedures • Issues and prospects • Conclusions Engineers must](https://reader036.vdocuments.site/reader036/viewer/2022081409/60751c6311be83688e32f198/html5/thumbnails/72.jpg)
Conclusions (continued)
3. Using the Modified Acceleration-Displacement Response Spectrum approach allows for simple and direct application of the improved equivalent linear parameters in design calculations.
4. This approach provides useful additional basic insight into the fundamental nature of nonlinear structural response through the Locus of Performance Points.
![Page 73: GENEALOGY OF PERFORMANCE-BASED SEISMIC ......• The Capacity Spectrum Method (CSM) • A few design and analysis procedures • Issues and prospects • Conclusions Engineers must](https://reader036.vdocuments.site/reader036/viewer/2022081409/60751c6311be83688e32f198/html5/thumbnails/73.jpg)
Conclusions (continued)
5. The Locus of Performance Points could be used to determine the Seismic Margin for critical systems.
6. The response deformation shape used in a single-mode linear analysis may not accurately predict local structural deformations in long-period MDOF system subjected to near-field ground motions.
![Page 74: GENEALOGY OF PERFORMANCE-BASED SEISMIC ......• The Capacity Spectrum Method (CSM) • A few design and analysis procedures • Issues and prospects • Conclusions Engineers must](https://reader036.vdocuments.site/reader036/viewer/2022081409/60751c6311be83688e32f198/html5/thumbnails/74.jpg)
Conclusions (continued)7. Gross measures of performance such as drift or
plastic rotation are better suited to judgment of performance.