*Professional Installation Recommended*

 Cat Security™by Cap City Muffler

Toyota Prius Generation 1 2000 - 2003 Thank you for your purchase. With the installation of this Cat Security™ plate, we hope that you will help prevent any further catalytic converter theft. The

included hardware kit will help further secure your catalytic converter and deter

thieves.  Package Contents: (1) Aluminum Security Plate (1) Stainless Security Plate (2) Rivets (black) (6) 3/16” Rivets (2) Self-Tapping Screws (1) Nylock Nuts (2) Security screws (3) Window Stickers

*Professional Installation Recommended*

Toyota Prius Cat Security™ Install Instructions (Gen 1)

Step 1: Locate the small Cat Security™ shield and the two locking nuts included in your package. To install this front small shield simply place it over the two existing bolts that are sticking out from the vehicle. The bolts are found behind the rear engine mount on the subframe.

DO NOT remove these bolts.

Step 2: Place the large rear shield and align the two outer corners on the subframe. (red mark on the black rivets) Secure the two front outer holes with these rivets.

*Professional Installation Recommended*

Step 3: Secure the two inner holes on the sides of the Cat Security™ shield. Temporarily install the self-tapping screws into the inner holes on the sides of the shield.

Step 4: Drill (6) 3/16” holes into the remaining holes. Then install the remaining rivets.

*Professional Installation Recommended*

Step 5: Remove self-tapping screws and install security screws

Step 6: Place a 30 degree bend in the two tabs. Bending too far will cause them to contact the frame and could cause rattling.

Last Step install the Cat Security™ stickers on the two rear windows and back window of your Prius to let people know your car is protected.