gefl-pb-abs | low profi le fl ush mounted presence detector
TRANSCRIPT
2.8m
6m
A low profile, flush mounted presence/absence detector with easy push button set up, that provides automatic control of lighting, heating and ventilation.
Key Product Features:
● Presence and absence detection● Easy to install ● Adjustable via easy push button operation ● Adjustable lux and timer● Switches any type of load● Works with any type of lamp.
Dimensions (mm)
Detection pattern high sensitivity low
GEFL-PB-ABS | Low profi le fl ush mounted presence detector
GEFL-PB-ABS datasheet issue 1 – Page 1 of 2
76 4 65
Easy push button setup
Datasheet
15739
GEFL-PB-ABS datasheet issue 1 – Page 2 of 2
CP ElectronicsA business unit of Legrand Electric Limited,Brent Crescent, London NW10 7XR, UK+44 (0)333 900 [email protected]
Important notice:
This device should be installed by a qualified electrician in accordance with the latest edition of the IEE Wiring Regulations and the applicable Building Regulations.
Due to our policy of continual product improvement CP Electronics reserves the right to alter the specifi cation of this product without prior notice.
www.cpelectronics.co.uk connect with us
Soft ware
Pollution
Type of action
Construction
Purpose
Classifi cations
Fans & ventilation equipment
Resistive heaters
LED lighting
Compact fl uorescent lighting
Fluorescent lighting
Incandescent lighting
Maximum loads
Minimum load
Time out range
Compliance
Material (casing)
Humidity
Working temperature range OC
Max power factor correction capacitance
Terminal capacity
Power consumption parasitic
Supply frequency
Supply voltage AC
Weight
IP rating
Control method
Technical Data
Part Code
Class A
Degree 2
Type 1.B action (micro disconnection)
Independent, flush mounted, electronic control
Sensing control
3A
8A
3A
3A
4A
8A
100mA
10s–30m
EMC-2014/30/EU, LVD-2014/35/EU
Flame retardant ABS and PC/ABS
5 to 95% non-condensing
-10 to 35
40μF
2.5mm²
711mW
50 / 60Hz
230VAC +/- 10%
0.15kg
IP40
Basic switching
GEFL-PB-ABS